Related
Hey guys,
I cracked the digitizer and LCD on my captivate and was wondering where I could find OEM parts for the captivate. I've checked ebay and amazon, though the prices were very steep. I know I will have to shell out something, but $150 for a digitizer and new LCD is outrageous. I only payed $8 for an iphone 3gs replacement (though is more widely used, thus the cheap price). If anyone has a suggestion, I am all ears and eyes.
Gorilla you mean?
No idea how to get them either.
Sent from my Captivate. Andromeda 3, Onix 2.0.5 @ 1.2Ghz
It's actually pretty easy to break the screen if you're trying to... I have a terrible temper.
iwontletme said:
Hey guys,
I cracked the digitizer and LCD on my captivate and was wondering where I could find OEM parts for the captivate. I've checked ebay and amazon, though the prices were very steep. I know I will have to shell out something, but $150 for a digitizer and new LCD is outrageous. I only payed $8 for an iphone 3gs replacement (though is more widely used, thus the cheap price). If anyone has a suggestion, I am all ears and eyes.
Click to expand...
Click to collapse
I have one on a device I was going to repair, If you want to DM me we can talk... (I can promise it will be MUCH cheaper than the $150.)
iwontletme said:
It's actually pretty easy to break the screen if you're trying to... I have a terrible temper.
Click to expand...
Click to collapse
I wouldn't destroy a $500 piece of electronics. Yes i paid that much.
here is a little better
http://www.cell-phoneparts.com/sams...-touch-screen-digitizer-replacement-p-42.html
what I would like to know is how does one seperate the LCD from the front part of the housign?
41LY45 said:
I wouldn't destroy a $500 piece of electronics. Yes i paid that much.
Click to expand...
Click to collapse
I paid $400 for mine back when they first came out
Hydrocharged said:
I paid $400 for mine back when they first came out
Click to expand...
Click to collapse
$478 to be exact.
The phone came as an imported set here.
Proxyep said:
what I would like to know is how does one seperate the LCD from the front part of the housign?
Click to expand...
Click to collapse
+1
The website doesn't really specify exactly what's there and the pic is useless. Do you just have to get the plastic housing off of your phone and then just install your old motherboard and attach all of the cables?
Or is it just the glass part and you have to figure out how to attach it to the motherboard assembly?
My screen is also F'ed.
In AMOLED screens the display and the usual "digitizer found in older LCD are all in one piece. Hence the price... you cannot separate them so to speak. The replacement part basically is the whole front of the phone housing and all.
Find the break-down video and you will see.
richuwo11 said:
+1
The website doesn't really specify exactly what's there and the pic is useless. Do you just have to get the plastic housing off of your phone and then just install your old motherboard and attach all of the cables?
Or is it just the glass part and you have to figure out how to attach it to the motherboard assembly?
My screen is also F'ed.
Click to expand...
Click to collapse
The whole phone has to be disassembled to remove the front glass and LCD. Once the back plate is off, you get a small flat head screwdriver (non magnetized) and pry up all of the cables. after that take a small pry tool, and pry around the front housing and the screen. There are clips and glue that hold it all together, so once the clips are free, you still have to gently pull the housing and screen apart. Once you do it a few times it is pretty simple and takes about two minutes. If you need a more technically specific run down, let me know.
I got my phone all apart... anybody have a trusted ebay or internet source for a new OE LCD/Digitizer?
I have searched high and low for an answer on how to replace a scratched screen of the SGS2 by yourself and have finally found the answer.
This will definitely VOID YOUR WARRANTY so don't say you haven't been warned.
I suggest you only use this guide if you were desperate like me. My phone didn't come with an official warranty so I was as good as screwed if I wanted a new screen.
Step 1: Obtain the part
Just ebay for lcd screen and digitizer galaxy s2 (however u may wish to buy it with the faceplate see below note). You want both the super amoled plus screen and the digitizer together. You can get this for about 120-130 USD.
There are some vendors that sell just the 'lens' but you need a specialized machine to replace it and is simply not worth the trouble.
Note that if you go to an original Samsung service centre, when they order the part, it comes together with the face plate and is therefore a breeze to install. This part is for sale on Ebay too. http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0. I would recommend you to buy this type instead of just the LCD and digitizer.
Follow this disassembly guide (not mine).
Now using a thin metal flat tool with a wide flat surface area, dig at the small gap from the top of the screen and pry the screen from the frontplate. It is held entirely by double-tape so don't worry about any screws, catches. Be careful of not damaging the bezel in the process.
Clean off the old black tape and double tape as best as u can, and be careful of the bottom buttons. The attachment shows how it looks like after cleaning it.
Reapply the double tape in strips and try to shape it to fit as much as you can. This is tiresome but necessary since the adhesive behind the lcd screen is very weak and you don't your screen falling out of you halfway.
Push it in and it should stick. That's it! Then reassemble.
Confirmed working!
thanks for the write up, do you have any more photos of your process?
OMG, it's like watching an autopsy.
Could a better resolution screen or even 3d screen be used/upgraded later on?
Nice to know for something happens, Hope not
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Man,,u shud handle it a bit gently ,,,,i mean,i flinched every time u "threw" the phone on the table.
On second thought, I might as well buy that screen protector
Sent from my GT-I9100 using XDA Premium App
wow that is the definition of T H I N !!!!!
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
Thanks also full part with bezel here http://www.ebay.co.uk/itm/Samsung-G...062?pt=LH_DefaultDomain_3&hash=item3cb9ff0e4e
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable
http://www.ebay.co.uk/itm/LCD-Touch...669?pt=LH_DefaultDomain_3&hash=item3cb9ff0cc5
Samsung Galaxy S II 2 i9100 LCD Touch Digitizer Screen
With Housing Bezel front cover ,Home Button, Flex Cable Without Samsung logo
White house soon on site
psp888 said:
thanks for the write up, do you have any more photos of your process?
Click to expand...
Click to collapse
Unfortunately not at this time. I will do it the next time around (which will be soon as there is a slight imperfection with my button sensitivity so I might be inclined to try it again) but trust me it's not a beautiful process. Needs lots of guts. Nothing technical about it. Shove the flat tool in the gap and keep on loosening the glue as much as u can then take it off.
podgo said:
Hope wont be necessary. How did you scratch the screen so hard that it had to be changed? I tought the Gorilla Glass is almost unscratchable.
Click to expand...
Click to collapse
It's more like cracked. I dropped it on some rocks from waist height and it cracked. It seems that gorilla glass is not shatter proof. There are also some scratches/mini cracks from where the rocks cut it.
Lesson learnt, get a screen protector that hopefully will reinforce it a bit more.
I wonder how these replacement parts compare to the quality of the original parts.
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
psp888 said:
Is your new screen a Super AMOLED+ screen? all ebay listing just says LCD. Is it original Samsung part?
Click to expand...
Click to collapse
There some listed as Super AMOLED+ screen just search on ebay or even drop the sellers a question about their iteams.
It is a Super Amoled + screen (don't see any difference in quality between the old and new one). Most sellers don't really know much of their products unfortunately but they do say it's original and I do believe mine is.
There's no Samsung print on the front plate but it does have a part number which corresponds closely to the original one. Everything else looks exactly the same, even the black sponge at the back and the microchips have Samsung wording on them.
BarryH_GEG said:
OMG, it's like watching an autopsy.
Click to expand...
Click to collapse
I have stomach to watch dead bodies, but not a GSII LOL
Dropped SGS2 from bikemount : broken screen.
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
DirkB19 said:
OK,
I broke my screen this weekend. I was on a bike tour with the SGS2 mounted on the steering bar. For some unclear reason, the universal holder came off the bikemount at 25 kmh... Dropped on the paved road, and although still in the universal holder, which is made of soft rubber (which I would expect to break the fall), the screen of my beloved SGS2 was cracked !!! Apart from the cracked screen, everything else seems to work as before.
So, today I ordered a replacement set with bezel from aliexpress.com at 148USD.
When I get the part, I will try to post some pictures of the replacement process.
I had an HD2 before ... just sold it last Friday :-( ... I think over a period of 1,5 year, I dropped the HD2 about 6 times on hard surfaces ... also it fell off my bike once ... the HD2 never broke.
So, is it just bad luck this time, or is the built quality of the SGS2 just not as good as the HD2 ?
Regards,
DirkB
Click to expand...
Click to collapse
It is very easy to do. Just unclip each component and transplant it to the new case.
I have to do my friends one this weekend as he has dropped it and damaged the screen and the bezel .
I have managed to source the screen and the bezel for him all as one piece .
Now all the guides i have seen just rip the phone to pieces , surely if we have the right bits like i have bought this fix is very smple to do??
I am thinking it is just a case of undoing the 7 screws at the back of the phone , opening it up and then disconnect the screen cables from the mainboard . Does the whole front then come away??
If not i take it i have to undo the screws on the main board to release the screen? but this means the componets of the main board may come loose etc??
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
buxz777 said:
Has anyone that has done this got any info on just swapping the screen with the complete part? when i say complete part i mean the one that comes with the bezel and home button etc like this
http://cgi.ebay.com/LCD-Touch-Digit...312?pt=LH_DefaultDomain_0&hash=item3a682b9ad0
Thanks in adance for any guidance
Click to expand...
Click to collapse
+1 for me.
I received my screen including bezel.
I've removed the main board just like the guy in the Youtube video.
But now I still have to transfer (from original front to my new front):
- the bottom PCB (where the microUSB sits)
- the camera
- the speaker
etc ...
I can not find a description/movie of how to do this ?
The bottom PCB for example has 2 screws, but after removing them the PCB itself looks like glued to the front assy'.
I prefer to see or get proper instructions before starting the rest of this adventure
...
PS : I got my part from aliexpress.com within 2 weeks (via airmail). It's with the Samsung logo on it and the package included all required tools (screwdrivers) to do the job. Would be nice to see some written instructions included as well.
Grtz,
DirkB
Hi guys, I got my hands on a MT4G with a broken LCD.
First Q, is it worthy getting a replacement off cheapbay? What other options are there?
Second Q, is it hard to replace it? Is it possible to do it myself?
Thanks for your advise...
I haven't replaced an LCD myself but I am looking to replace a digitizer for my wife's phone.
Someone posted up this link for me in another thread I started.
http://www.ebay.com/itm/FULL-LCD-DI...984?pt=LH_DefaultDomain_0&hash=item2a12834fe0
This should take out the hard part of disassembling the digitizer from the lcd and reattaching and the adhesive itself.
It's the complete the front housing, digitizer AND LCD in one. Already assembled.
I haven't ordered it myself yet but I AM tempted. Especially after watching some of these disassembling videos.
Let me know what you decide and how it worked out.
Just PM me.
Thanks bro and good luck.
Thanks a lot, I will check it out, the adhesive part really has me in doubt.
I've replaced the LCD without the digitizer attached and you are both correct. It can be done but the finished product is not factory quality. I looked at the ebay part posted in the link and that would be the way to do it. Otherwise you have to use a hair dryer to heat the glue and its not fun.
If you are not familiar with taking electronics apart look for a video tutorial via google; I used one to take the MT4G apart. Also label the screws as they come out by drawing the phone on a piece of paper and placing the screw accordingly on the paper. Makes assembly much easier!
Hope you take on the challenge and good luck.
allenmehrer said:
I've replaced the LCD without the digitizer attached and you are both correct. It can be done but the finished product is not factory quality. I looked at the ebay part posted in the link and that would be the way to do it. Otherwise you have to use a hair dryer to heat the glue and its not fun.
If you are not familiar with taking electronics apart look for a video tutorial via google; I used one to take the MT4G apart. Also label the screws as they come out by drawing the phone on a piece of paper and placing the screw accordingly on the paper. Makes assembly much easier!
Hope you take on the challenge and good luck.
Click to expand...
Click to collapse
Yeah my only thing about ordering this complete assembly is that my wife's phone has the SO screen and I don't want to replace with an SH, which I'm sure that part is going to be. (99.99% sure)
Add to that, she doesn't even need a new LCD and the digitizer alone is just 25 bucks.
Decisions, decisions.
nguyendqh said:
Yeah my only thing about ordering this complete assembly is that my wife's phone has the SO screen and I don't want to replace with an SH, which I'm sure that part is going to be. (99.99% sure)
Add to that, she doesn't even need a new LCD and the digitizer alone is just 25 bucks.
Decisions, decisions.
Click to expand...
Click to collapse
I have to clean the dirt out between my digitizer and lcd! Can't tell you how annoying that is. Suppose someone could do a better job resealing it... It would be nice if a digitizer/lcd kit came with new adhesive.
http://www.papadigitals.com/advance...uch+4g&sgmid=aa6a532f59b343f82afc0aaa2d55c02d
I saw lcd screen and touch screen digitizer for HTC mytouch 4G there.
I've been taking electronics apart since I was 7 tears old. The MyTouch 4g finally beat me.
There are a lot of really delicate connectors that break easily. Be careful
dr_tracker said:
is it worthy getting a replacement off cheapbay? What other options are there? Second Q, is it hard to replace
Click to expand...
Click to collapse
You'd better to buy non-working phone (maybe from ebay) and make one from two phones. You should have the screwdriver. Easy to replace.
It is not really hard i saw a vid on youtube just search it up super easy actually
I bought a digitizer LCD already together for like 75 and it wasn't too bad to exchange and put this new one in but when I powered the phone the bottom left of the screen didn't work and it impossible to take it back out of the silver bezel without breaking it so I sent it back to get my money and lost the bezel. Its not too hard but be careful take your time and don't pull or yank anything.
Sent from my SGH-T959 using xda premium
I replaced my digitizer. I agree, there are many delicate connectors, but nothing to be afraid of. You should watch the YouTube video over and over. Also, be careful not to push on the bottom buttons while taking it apart. This was the most frustrating thing because they wouldn't sit properly when reassembled. I took it apart 5 times before I forgot to detach the power ribbon and ripped it off! There are motherboards available to fix this, but saving it for another day.
Sent from my HTC Glacier using Tapatalk
That's funny that's the same exact thing I did pulled the power ribbon right out so I just said screw it and just bought a new phone on eBay
Sent from my SGH-T959 using xda premium
Hello guys,
10 minutes ago my galaxy note N7000 screen cracked in my pocket.
So I need to buy a replenishment screen from Samsung but I simply can't find stores that supplies replenishment parts for it. Do anyone knows where to buy a new Amoled LCD screen for galaxy note ?
Thank you and best regards,
Amid
ebay, took 5 days to ship from HK to NYC. Follow youtube guide in opening the note and use blow dryer/heat gun to loosen the sceen, wedge open with something sharp and slowly tear back the screen gently. You will need the old Wacom sensor from the broken screen so becareful to not to rip it. There is guide in the general section. I broke mine 2 weeks ago and replaced it in a hour. take your time you can get it done.
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
amidsal said:
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
Click to expand...
Click to collapse
I think this is what you are looking for:
http://www.ebay.com/itm/S-Black-Dig...087?pt=LH_DefaultDomain_0&hash=item2c65951cd7
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
amidsal said:
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
Click to expand...
Click to collapse
Hmmm no, in that case you will need the 200ish one.
You will need the entire setup, glass, LCD, and Touch. Does not come with Wacom sensor. Looking around you can get them for 230-260. Look for delivery, that makes a huge difference, especially with your phone out of commission.
This is the guy I purchased mine from, but I panic and purchase the first one I saw. If you do some research you will find cheaper, but I got min in 5 days. So I am glad this guy came thru. Good luck, its going to stress you out a bit when you have to remove the screen from the front panel, they are glued on so take your time. Looks like your LCD broke so it is going to crack and shatter further so make sure you do it in area where it is easy to clean. If you look at the front panel after you remove it, you will see one wire that does not come with the replacement one, that is for the wacom sensor, so be careful and don't damage that part, you will need to peel it off and place it back on to the replacement lcd, otherwise your s-pen won't work. It's been 2 weeks, my phone is going strong and no sensor or sceen issues. You should get a more protective case, since you probably already blew close to ~$1000 on this phone by now. I have a casemate, otterbox commuter looks like a good one. Once again good luck, you can do this.
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Well mine looks brand new, must be the workmanship ;-P But why flame my advise when he is going to need to do it anyways, the screen is completely useless, as was mine. Why don't you keep your assumption to yourself in how it will look or if he is going to ruin the device. If he decides that he would rather live with a crack screen or someone who is willing to do it, there really isn't much options here. What's up with such negative attitude here. Just trying to show him that it can be done.
---------- Post added at 04:30 PM ---------- Previous post was at 04:26 PM ----------
jusutus said:
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Click to expand...
Click to collapse
Look at the delivery time. I got mine in 5 days. just talked to the seller.
Replacement screen with 2 connectors
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Leo.F said:
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Click to expand...
Click to collapse
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
s.magus said:
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
Click to expand...
Click to collapse
Thank you s.magus! I would love to go that route, but I'm in Venezuela, and Samsung is selling the GN, but does not yet have replacement parts. You're right, that will be the best way.
n7000 replenishment screen
hello jignesh here .... i hav note gt n7000 ... it working 100% normally ... just cracked screen or glass or lcd ... i dont know what is problem .... can u tell me what is the problem .... glass cracked or screen cracked or lcd cracked ???? how can i find problem ???? touch and everything is working perfectly as like new note .... i already using note since 1month ... but now i want to repair it ... so what can i do ??? just change the front glass or change lcd ??? please reply me ....
Where is the cheapest part in uk?
is there anyone in India who could tell the price of galaxy note's white screen touch (not the lcd screen).Thanks in advance....:good:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
baz77 said:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
SUPER NICE !!!!
After a search for 5 days ... This one is the best !!!
THNX baz77
your welcome, hope you fix yer stuff and be carefull electronics is delicate stuff
Sent from my GT-N7000 using Tapatalk 2
i disagree
Hi ,
I think Senior member Justis is right... many of us dont want to do a full screen replacement for 220$...when we can just remove the front screen for 20$..many have done this method successfully... U just need to watch a lot of youtube videos on this and be careful/delicate with the procedure... its possible.
So i dont think what he said was a waste.. Pls keep such remarks to yourself.. He was not wasting anyones time.
Infact you are wasting my time making me read your message and give u a reply.
You know what...im doing a screen replacement too... thats what guys do first. njot jump in and do a full replacement for 220 $.:good::good::good:
jusutus said:
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
Click to expand...
Click to collapse
I recently bought a cracked oneplus x in hopes of fixing and using it. So I went ahead, heated it up and took the glass off. This went fine. I set the heat around 90-100° C and the glass came off just like it would from any other phone. The display is only glued on on the sides/bezels unlike Samsung phones in which the whole panel is glued down. This obviously made things easier. To my surprise the loca came off pretty easily with some rubbing alcohol. Before removing the glass you have to take off the soft keys, which are glued to the glass. These are connected to the back of the screen assembly by a connector which you can see in the pictures. It was when I went to buy the part I realized I had made a mistake: I couldn't find any. So I am stuck with this for now, and if anyone knows where I could buy the glass please give me a link. Regardless, I hope this is informational and helpful to anyone who might want to attmept this in the future.
mnath said:
I recently bought a cracked oneplus x in hopes of fixing and using it. So I went ahead, heated it up and took the glass off. This went fine. I set the heat around 90-100° C and the glass came off just like it would from any other phone. The display is only glued on on the sides/bezels unlike Samsung phones in which the whole panel is glued down. This obviously made things easier. To my surprise the loca came off pretty easily with some rubbing alcohol. Before removing the glass you have to take off the soft keys, which are glued to the glass. These are connected to the back of the screen assembly by a connector which you can see in the pictures. It was when I went to buy the part I realized I had made a mistake: I couldn't find any. So I am stuck with this for now, and if anyone knows where I could buy the glass please give me a link. Regardless, I hope this is informational and helpful to anyone who might want to attmept this in the future.
Click to expand...
Click to collapse
You can buy it from here
http://vifocal.com/oneplus-x-lcd-display-with-touch-screen-panel-replacement.html
loveboy_lion said:
You can buy it from here
http://vifocal.com/oneplus-x-lcd-display-with-touch-screen-panel-replacement.html
Click to expand...
Click to collapse
I was hoping to do a glass only repair with loca uv glue since the glass alone is substantially cheaper. Thanks, however, I atleast have that as a backup, since it is at a pretty reasonable price for an amoled panel, if it takes too long for the glass to be available.
till now .it seems only this site sell the oneplus x lcd display.it looks like a professional website and can be trust
Send from my Oneplus Using Tapatalk
Maybe you should go to aliexpress.com and the keyword is oneplus x glass screen
Maybe it will help you
heres a link for one:
http://www.aliexpress.com/item/1PCS..._2&btsid=3a76fb04-754a-42d0-b51b-7b076dca6b80
mnath need your help
m opx screen got a crack after it fell down Touch is working and i had initially thought of replacing the entire set which cost around 8k but after reading your thread i feel it can be done by replacing just the cracked portion.
Can you guide me on how to get it done ? pls ping me on whatsapp 9633318375 (Sony, kerala)
Could you pls tell me how to put the glass of the phone ? Ping me on whatsapp (081282213266) isya pramesta
I would also love to know how you got the glass off!
I bought the glass by itself, and I'm hoping that I would be able to recreate your result, so if you can tell me a bit more about the process that would be nice!
Did anybody get more details pics/instructions on just replacing the glass, mine arrived today and I would like to get it done?
Also does anybody have a specific recommendation on the LOCA adhesive to use to glue the glass back on?
Z
Ghh
---------- Post added at 02:59 PM ---------- Previous post was at 02:54 PM ----------
Please any one suggest me how to replace only the front glass of one plus x
This is above and beyond being that the part for glass+LCD is like $30 on ebay.. Like you're risking the fact that the adhesive is like a little worse and a sunny day could easily destroy everything. If you're going to repair this phone, do the glass and LCD together.
Thanks for your reply...
mnath said:
I recently bought a cracked oneplus x in hopes of fixing and using it. So I went ahead, heated it up and took the glass off. This went fine. I set the heat around 90-100° C and the glass came off just like it would from any other phone. The display is only glued on on the sides/bezels unlike Samsung phones in which the whole panel is glued down. This obviously made things easier. To my surprise the loca came off pretty easily with some rubbing alcohol. Before removing the glass you have to take off the soft keys, which are glued to the glass. These are connected to the back of the screen assembly by a connector which you can see in the pictures. It was when I went to buy the part I realized I had made a mistake: I couldn't find any. So I am stuck with this for now, and if anyone knows where I could buy the glass please give me a link. Regardless, I hope this is informational and helpful to anyone who might want to attmept this in the future.
Click to expand...
Click to collapse
If you only need the glass it is available on ebay :
http://www.ebay.com/itm/Black-Front...317149?hash=item235e06281d:g:DGgAAOSw6n5XwQUT
I have few questions, what did you use to heat up the display ? I don't have a heat gun, will a hair dryer do the job ?
Also are there any ribbon cables which I need to be careful about while doing the process?
Thanks in advance!
mnath said:
I recently bought a cracked oneplus x in hopes of fixing and using it. So I went ahead, heated it up and took the glass off. This went fine. I set the heat around 90-100° C and the glass came off just like it would from any other phone. The display is only glued on on the sides/bezels unlike Samsung phones in which the whole panel is glued down. This obviously made things easier. To my surprise the loca came off pretty easily with some rubbing alcohol. Before removing the glass you have to take off the soft keys, which are glued to the glass. These are connected to the back of the screen assembly by a connector which you can see in the pictures. It was when I went to buy the part I realized I had made a mistake: I couldn't find any. So I am stuck with this for now, and if anyone knows where I could buy the glass please give me a link. Regardless, I hope this is informational and helpful to anyone who might want to attmept this in the future.
Click to expand...
Click to collapse
Hey, thanks for this information. Could you olease guide me once through the process in detail. I dont want to make any mistakes. Whatsapp me on+91-8821099326 . Thanks it will be very generous of you
Sparsh01 said:
Hey, thanks for this information. Could you olease guide me once through the process in detail. I dont want to make any mistakes. Whatsapp me on+91-8821099326 . Thanks it will be very generous of you
Click to expand...
Click to collapse
Search Youtube videos, it wil be helpfull
Kéno40 said:
Search Youtube videos, it wil be helpfull
Click to expand...
Click to collapse
Yeah, i did. But no video for oneplus x.
And since it has a super amoled. I dont want to take any chances.
I have only one shot.
Totally agree with all of you, I recently purchased just the front panel glass and really wanted to replace it, only for my local phone repair place won't do it without the lcd and digitizer... If someone can post pics or tell me if a hair dryer will do the job, I would give it a go myself
SenorAfro said:
Totally agree with all of you, I recently purchased just the front panel glass and really wanted to replace it, only for my local phone repair place won't do it without the lcd and digitizer... If someone can post pics or tell me if a hair dryer will do the job, I would give it a go myself
Click to expand...
Click to collapse
Bro you can watch Jerry Rig Everything videos of glass only repair of S4 and s5 in which he separated the glass with a hot gun and playing cards. Plz do share your photos also if you do repair..
Guys found a video on youtube of oneplus x glass only repair -----> https://www.youtube.com/watch?v=Vs1iXlBoYAM
share also you repaired glass pics also to help others also....
don't forget to hit the Thanks! button