Related
Hi guys.. I tried installing jelly bean on this device (i8160p and it's not mine) using odin and a stock 4.1 rom I got from samsung updates(I have no root and I went from a never-touched stock)... All went fine, It's working and has all the features. Except that now its owner is asking me constantly to revert back to the original os, since he did find 4.1.2 very slow. So I went back the same path as in the first place in an attempt to get the original gingerbread : I downloaded a stock 2.3 from the site and then tried flashing it.. All again went smooth, with no problems, until I got stuck on the bootscreen and noticed that there was no way to access recovery(download mode working fine though)... So what I'm left with now is a non-booting gingerbreak or the possibility to stay in jellybean(flashing it still works), I'd prefer if I could go back to GB; I think the problem is that there was some conflict caused by jellybean which will require a reset that I can't of course do since I can't boot into recovery, and I don't see any way to install a custom recovery. So can this be done any other way, I'm afraid I'll break this phone before I'll even come up with anything since this is my first experience with roms and boot on an android;
info : as I mentioned There is no root (for now. I might however get into that from jellybean, but I'd rather not if it's possible) and the model is i8160P . an emphasis on the P here since it's the reason I can't find any custom roms, and all I'm left with is the stuff in here
Edit : got gingerbread back after following what angrybb has suggested
Flash the working JB, and after that root your phone like here: http://forum.xda-developers.com/showthread.php?t=2139263 Reboot to recovery and after that follow the howto: http://forum.xda-developers.com/showthread.php?t=2352064 just in step 8 use original gb firmware.
If you can't get adb root access from stock recovery then flash kernel with cwm, for jb for example this: http://forum.xda-developers.com/showthread.php?t=2304432 or this http://forum.xda-developers.com/showthread.php?t=2171054
After flashing one of those kernel, again follow: http://forum.xda-developers.com/showthread.php?t=2352064 , again in step 8 use gb fw
Ok I'll see
Thanks man I'll try what you suggested as soon a I can...
I have a question though: now I noticed that some people fixed this issue by dowloading some other parts (.pit and something else), but of course I'm unable to find these for the model with the P... Now If someone can please tell me if these files have anything to do with the re-partion option in odin(I heard that it does format everything and not just put things on top of things).... Is using it safe given that I don't mind losing data, or should I stay away from it ?
For angrybb : the phone still shows as i8160p in the about section and has access to network...
Here there is a lot talking about pit files, some tehniques with flashing one fw after another, but with no real explanation why this should be done this way. I dont like doing things like that, i want to understand what i am doing. I still haven found some in depth info about pit files.
Anyway, i upgraded from GB to JB with kies, after that i compared some parts of fw and pit file is not changed. Pit from GB and JB have same md5 in my phone, so it is the exactly same file.
I know that method i suggested is not short and plain easy but it is tested and working.
Thanks
Sorry for the delay... For anyone with same problem just follow what angrybb has suggested, but do not under any circumstances ignore backing-up CSPSA_FS and MODEM_FS if you care about your phone's ability to make calls !
hey, maybe you guys could also help me out? i came from a custom ROM that i was having problems with so I wanted to go to an official ROM instead. Originally i came from a GB stock ROM, then i went straight to CM 10.1 but i didnt have any signal on my phone so i tried flashing original stock 4.1.2, now im stuck on the boot screen and i cant access recovery mode. please help?
P.S. my phone is i8160
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
gvazquez82 said:
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
Click to expand...
Click to collapse
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
MrHaPpY66 said:
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
Click to expand...
Click to collapse
First of all thank you for trying to help me, I hope you are having a good Thanks Giving.
I used the thread you linked to, and downloaded the version with out knox. I followed the instructions
transferred ROM and flashed kernel file to SD card
used odin to flash TWRP,
used twrp to flash rom and kernel file.
and it takes the file thankfully, there's only one issue. My phone can't make or receive calls/texts. Is yours able to?
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Next Update
the bootloader I flashed apparently flashed to the external sd card? I flashed another one and it is booting from the internal sd. I had to flash a different modem the one in the bootloader/modem file I flashed from the link above didnt take? I got most everything sorted out, but im getting tired, it has been an all night adventure. its 08:23 est now
sorry for the delay in updating this I had to get some rest.
theramsey3 said:
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Click to expand...
Click to collapse
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
spongdangly said:
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
Click to expand...
Click to collapse
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I will give that a shot, but what's an APN, sorry. And how do I create one, and is it needed for me to do so?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
It should be, I'm working right now so I don't have time to fine the guide on how to inject your IMEI. If I remember correctly it involves using QPST. If you have an old (or any) working Nandroid backup that should fix the problem.
FYI, make sure you don't use the guide for the international S3 as it has different hardware and folder structure/contents.
As for the APN, it should automatically fill itself in since it reads it off the SIM Card (I might be wrong).
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I tried it and it work!!!!!!!!!!!!!!!!!
67 texts just came in. Sir, I thank you oh so kindly. You have made this gloomy rainy day oh so joyous.
No problem. Glad I could help you.
The real credit should go to -Mr.X-, loserskater and anyone else(no disrespect there were alot of files) whose stuff I tried to flash lastnight thank you all in the dev community who contribute.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
gvazquez82 said:
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
Click to expand...
Click to collapse
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
flexfulton said:
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
Click to expand...
Click to collapse
do you know of a good stable kit kat like ROM I could use for the s3? And any speculation as to why the ROMs werent taking for me?
To anyone more of an expert than myself on these matters (which I presume to be a large portion of users here), I'd greatly appreciate any help that can be provided. I'd also like for this thread to be a central collection of baseband/modem functions, behaviors, troubleshooting, etc...
I've had a T-Mobile S4 (SGH-M919) for a while now and have mostly used CyanogenMod derived ROM's and as of lately, more Google Play Edition/Nexus type ROM's (which generally appear to be written for the international i9505 and hence show the model number of my phone to be such; this may or may not be relevant). All of the sudden, the other day during a phone call I received, there was no audio on either end of the call. I couldn't hear the caller nor could the caller hear me. This also happens if I initiate the call. I know for a fact that the media speakers (speakers used during speakerphone) as well as the earpiece speaker are perfectly functional so it's not a case of hardware failure where it works on Bluetooth or speakerphone only. As soon as a call initiates, you hear no ringing or audio once the caller answers other than the tone when the call ends/disconnects. First thing I tried was switching from ART back to Dalvik just for the sake of troubleshooting. Second, I tried clearing the cache (and Dalvik, just for the hell of it). Still no success. So next I try a completely different ROM. I was presently on a GPE ROM with the Samsung kernel so I switched to plain CyanogenMod with a custom kernel. I even went back to a stock ROM! No success either way!!
It was at this point I decided that it had to be a hardware/firmware issue since the issue remained when changing ROM's so I naturally assumed baseband/modem. I don't understand why this issue just magically occurred one day when I hadn't changed anything, but I thought that if I reflashed a clean modem image or and updated one, then maybe it would fix it... I was on MDL so I reflashed the MDL modem. No success. Then (and here's where I f****d up), I tried flashing what I THOUGHT was a stock NB4 firmware file in ODIN. Turns out that despite being labeled as stock, it had a custom kernel built-in and tripped my KNOX counter (FFFFFUUUUUUCCCCCKKKK!!!) Well, since I really only intend to use AOSP/CM based ROM's, it's not such a huge deal for me but still, it sucks.
Here's where I had a break: Yesterday, I tried flashing the MDL modem again, then that didn't work so I tried flashing the MK2 modem. I booted up, made a call, and it worked! First time! Well, that was short lived success because I tried another call immediately after to verify and it started all over again. Now, even reflashing MK2 won't get it to work even once like it did this one time.
Does ANYone who understands baseband and modem firmware much better than I do have any insight or instruction on what I can do? Because of this one issue, I have an otherwise perfectly good S4 that I can't use just lying around. I've had a Nexus 5 for almost a year and love it but I just destroyed the screen after a drop the other day and wanted to switch to the S4 temporarily until the Nexus 6 comes out. ANY IDEAS????
Loss of call audio occurs when your rom and firmware versions dont match. Since you've tripped your knox counter, you have some more freedom now. I think you should (after someone confirms) use the samsung pc software to do a full restore of your phone. It will blow away everything you have and install the latest firmware and matching rom as if you were stock and accepted all otas. Then you can root, flash recovery, flash rom, restore backed up apps. You'll have the cleanest possible setup. Just wait for someone to confirm because i haven't been following closely in the past few months. Alternatively you can find the latest firmware and do it with odin but in your position theres no advantage to doing it piece-meal like that (unless i've missed something in the past few months) because you've already tripped knox
faiyo said:
Loss of call audio occurs when your rom and firmware versions dont match. Since you've tripped your knox counter, you have some more freedom now. I think you should (after someone confirms) use the samsung pc software to do a full restore of your phone. It will blow away everything you have and install the latest firmware and matching rom as if you were stock and accepted all otas. Then you can root, flash recovery, flash rom, restore backed up apps. You'll have the cleanest possible setup. Just wait for someone to confirm because i haven't been following closely in the past few months. Alternatively you can find the latest firmware and do it with odin but in your position theres no advantage to doing it piece-meal like that (unless i've missed something in the past few months) because you've already tripped knox
Click to expand...
Click to collapse
Thanks for the response! This was actually the approach I initially wanted to take when reflashing just the modem didn't work; that is, using Samsung Kies to do a complete Samsung official firmware download and restore. Unfortunately, every time ibtry and do the "emergency recovery" as they call it, once I type in my serial number and model like the app requires, it always tells me that the device is not supported! It's like the device's firmware has been programmed as another that isn't recognized by Samsung. At first I thought it was because I was on a custom ROM and it didn't recognize the software. I remember a while back I needed to do an official restore and I had to get the phone boot loader to read status "Samsung Official" and not just official. I actually put stock everything back on manually and got those status fields to read Samsung Official for the binary and kernel but it still won't restore with Samsung's software. It's my estimation that Samsung has now integrated the Knox counter into their software support. I'm assuming that with that sensor tripped, I can never be "official" and therefore supported again. That's why I've been doing everything Odin. With all of this in mind, do you have any other recommendation? I'll look a little further into the problems I've had with Kies and maybe why I can't restore in the meantime but otherwise, why do you think flashing MK2 modem worked for just ONE call and then stopped again? And why do you think that the issue just suddenly happened in the first place without a software change?
thair7391 said:
Thanks for the response! This was actually the approach I initially wanted to take when reflashing just the modem didn't work; that is, using Samsung Kies to do a complete Samsung official firmware download and restore. Unfortunately, every time ibtry and do the "emergency recovery" as they call it, once I type in my serial number and model like the app requires, it always tells me that the device is not supported! It's like the device's firmware has been programmed as another that isn't recognized by Samsung. At first I thought it was because I was on a custom ROM and it didn't recognize the software. I remember a while back I needed to do an official restore and I had to get the phone boot loader to read status "Samsung Official" and not just official. I actually put stock everything back on manually and got those status fields to read Samsung Official for the binary and kernel but it still won't restore with Samsung's software. It's my estimation that Samsung has now integrated the Knox counter into their software support. I'm assuming that with that sensor tripped, I can never be "official" and therefore supported again. That's why I've been doing everything Odin. With all of this in mind, do you have any other recommendation? I'll look a little further into the problems I've had with Kies and maybe why I can't restore in the meantime but otherwise, why do you think flashing MK2 modem worked for just ONE call and then stopped again? And why do you think that the issue just suddenly happened in the first place without a software change?
Click to expand...
Click to collapse
A few notes: i have a similar problem in the last few months. After about 12 hours of uptime i cannot hear the other caller. I thought it's because im using ****ty roms from these forums so i was about to go to the international forums and flash theirs. I only use touchwiz roms so far. And it manifests about a week after flashing the rom. And i have to reboot twice a day to keep it functioning So yeah.. i get it too even tho i had a matching baseband
I think the reason you tripped knox wasnt because of the kernel. It's because a stock firmware package will upgrade your bootloader, while you should have actually been pursuing a modem-only package to flash with odin (which preserves the MDL bootloader and prevents tripping knox).
Anyways, im not sure what you have done with the "Samsung offical" status or modifying the identifiers of the phone but i was pretty sure kies would restore it. If not, then you should be trying to flash stock firmware (full) for NH7 firmware which was released recently. Not just modem only, which is what some of the packages here contain (meant for people with MDL bootloaders who dont want to trip knox). Try to pursue the full firmware odin flash. Im pretty sure that would do it for you. It should be the full-on samsung stock.
About kies: i haven't used it but i've experienced weird things happen with adb and specific usb cables and usb ports on the computer, even with nexus devices. I hate to suggest this but try a different computer and different usb cable. Its an actual solution thats worked before. It messed me up before and a number of other people. Make sure its up to date too i kinda recall old versions had a compatibility issue
faiyo said:
A few notes: i have a similar problem in the last few months. After about 12 hours of uptime i cannot hear the other caller. I thought it's because im using ****ty roms from these forums so i was about to go to the international forums and flash theirs. I only use touchwiz roms so far. And it manifests about a week after flashing the rom. And i have to reboot twice a day to keep it functioning So yeah.. i get it too even tho i had a matching baseband
I think the reason you tripped knox wasnt because of the kernel. It's because a stock firmware package will upgrade your bootloader, while you should have actually been pursuing a modem-only package to flash with odin (which preserves the MDL bootloader and prevents tripping knox).
Anyways, im not sure what you have done with the "Samsung offical" status or modifying the identifiers of the phone but i was pretty sure kies would restore it. If not, then you should be trying to flash stock firmware (full) for NH7 firmware which was released recently. Not just modem only, which is what some of the packages here contain (meant for people with MDL bootloaders who dont want to trip knox). Try to pursue the full firmware odin flash. Im pretty sure that would do it for you. It should be the full-on samsung stock.
About kies: i haven't used it but i've experienced weird things happen with adb and specific usb cables and usb ports on the computer, even with nexus devices. I hate to suggest this but try a different computer and different usb cable. Its an actual solution thats worked before. It messed me up before and a number of other people. Make sure its up to date too i kinda recall old versions had a compatibility issue
Click to expand...
Click to collapse
So quick update/reply, I just stumbled upon a stock, lightly modified MK2 ROM flashable through recovery that I had buried on my microSD and decided to give it a go (since the MK2 modem was the only one that every gave me any success even though it was just one time, and even though the ROM I was using was custom so couldn't have really matched ANY Samsung baseband). Even though I really already knew and understood everything you told me, you were brilliant to remind me about the need for the modem to match the OS when it initializes. After booting up the Stock MK2, calls are now working, and consistently!!! Now I'm making a backup (just in case, even though I really don't want to use stock) and then I'm going to go for a custom ROM again, probably CM based. Thanks again for your help!
I know exactly how I tripped the Knox counter. I downloaded a firmware file that was LABELED as a stock NB4 ROM and that wasn't correct. It was a stock NB4 ROM with a MODIFIED CUSTOM KERNEL! That would have been a useful detail beforehand...
I'm also familiar with using adb and it's selectivity with USB cables. They need to be "fastboot" cables which usually only is the case with manufacturer included cables. Using Kies to restore firmware to a phone though should have nothing to do with fastboot or adb. First off, you don't need the adb Runtime or SDK to use Kies nor does Samsung include it in the installation. Second, when you're using Download mode, that's Samsung's proprietary software using their own proprietary API's and commands to communicate and interface directly with their hardware so I think the issues I've had with Kies is something else. I appreciate the suggestion though.
As far as the matching modem and software goes, I'm a bit confused... Why is it that you can use custom ROM's non-related to Samsung after updating your baseband if the custom ROM isn't matching that firmware? Perfect example, just now... I tried the stock MK2 and it worked. Now I just finished loading clean CyanogenMOd, and it worked! BUT - only one and a half times... It went through once, I tried again, and then it stopped mid ringing of the call, now doesn't work. AHHHH!!! How am I supposed to do this? And why did I never have trouble in the past? Once I get a stock ROM and matching, working modem installed, what am I supposed to do from there if I want to switch to a CM based ROM?
thair7391 said:
So quick update/reply, I just stumbled upon a stock, lightly modified MK2 ROM flashable through recovery that I had buried on my microSD and decided to give it a go (since the MK2 modem was the only one that every gave me any success even though it was just one time, and even though the ROM I was using was custom so couldn't have really matched ANY Samsung baseband). Even though I really already knew and understood everything you told me, you were brilliant to remind me about the need for the modem to match the OS when it initializes. After booting up the Stock MK2, calls are now working, and consistently!!! Now I'm making a backup (just in case, even though I really don't want to use stock) and then I'm going to go for a custom ROM again, probably CM based. Thanks again for your help!
I know exactly how I tripped the Knox counter. I downloaded a firmware file that was LABELED as a stock NB4 ROM and that wasn't correct. It was a stock NB4 ROM with a MODIFIED CUSTOM KERNEL! That would have been a useful detail beforehand...
I'm also familiar with using adb and it's selectivity with USB cables. They need to be "fastboot" cables which usually only is the case with manufacturer included cables. Using Kies to restore firmware to a phone though should have nothing to do with fastboot or adb. First off, you don't need the adb Runtime or SDK to use Kies nor does Samsung include it in the installation. Second, when you're using Download mode, that's Samsung's proprietary software using their own proprietary API's and commands to communicate and interface directly with their hardware so I think the issues I've had with Kies is something else. I appreciate the suggestion though.
As far as the matching modem and software goes, I'm a bit confused... Why is it that you can use custom ROM's non-related to Samsung after updating your baseband if the custom ROM isn't matching that firmware? Perfect example, just now... I tried the stock MK2 and it worked. Now I just finished loading clean CyanogenMOd, and it worked! BUT - only one and a half times... It went through once, I tried again, and then it stopped mid ringing of the call, now doesn't work. AHHHH!!! How am I supposed to do this? And why did I never have trouble in the past? Once I get a stock ROM and matching, working modem installed, what am I supposed to do from there if I want to switch to a CM based ROM?
Click to expand...
Click to collapse
I really have no idea about aosp roms for this device because i only used touchwiz to keep samsung features.. so i have no knowledge about firmware compatibility. I would think the creator of the rom should specify any firmware requirements.
On the thought of hardware failure, and i know you said the speakers work, but did you test the sim card slot? Perhaps it needs to be cleaned? Maybe the sim card is partially failing so try a different card? Maybe you cut it and it's loose (you wont believe the crooked sim cards i've seen). I think it's worth pursuing since you said it worked once and not again.. maybe you had just taken the cover off while flashing stuff and touched/pressed it but it's losing contact again after flexing during use. I dunno dude, the kind of call audio issues i've had were always resolved with a reboot & making sure the modem matches the touchwiz build.
Please make sure you are running a full stock firmware package & keep the touchwiz rom consistent with it. Some firmware packages are partial components
So now I've just updated to a FULL STOCK NH7 firmware package. My build number and baseband are matching. NO CALL AUDIO!!
For starters, up until a few days ago, I ran all types of ROM with an MK5 boot loader and 3 different modems and never had a call issue. After that said, I read a few months ago about a guy had your same issue. He ended up getting a new sim card and he got is audio back. He also had reception issues before getting the no audio issue.
thair7391 said:
So now I've just updated to a FULL STOCK NH7 firmware package. My build number and baseband are matching. NO CALL AUDIO!!
Click to expand...
Click to collapse
Try flashing the firmware again, some have to flash it twice for the bootloader to update, which may the trouble. If that doesn't work try a new sim like it was suggested before me
I know it's been a while but I basically gave up and just recently came back to it. I've since bought a Nexus 6 so it's not a priority issue anymore however I would still like to fix this otherwise perfectly fine Galaxy S4 that I have lying around! I seemed to believe that there was a special combination of custom ROM and specifically the MK2 modem that would sometimes cause the audio to intermittently work but it appears I was wrong. I flashed the full stock NH7 firmware/baseband etc back to my phone twice as suggested and NY audio worked! For a few calls that is... Then it stopped working again. Sometimes I could clear cache and reboot and it would work! Once or twice anyways before crapping out again... The bottom line is that there isn't a pattern aside from a cleared cache that makes the audio work again before it stops soon after which unfortunately leads me to believe it's a deep rooted hardware issue in the baseband itself. Anyone else have ideas?
Other than trying a new sim, I can't really think of anything else except to make sure the bootloader really did update. Download Samsung phone info from play store and check bootloader info to make sure it was updated to NH7
Unfortunately it is completely updated. I tried a new SIM and everything works still except audio in phone calls, including ringing. I guess it's hardware... Guess now I just have an internet browsing MP3 player with web browsing capabilities.
I bought my N7100 used. Plugging the phone in while turned off wouldn't lead to it displaying a battery bar that shows how much it's charged, but rather a loading circle that's crashed. Now it has developed some other oddities like Wifi not being able to be turned on in this one Deep Impact ROM, and I figured I'd finally get this stuff over with by just reflashing the stock firmware, then putting a custom ROM on it.
Only problem is, where can I find the stock firmware? And which tool could I flash it with? Are there any linux-based ones? Just to be clear, I don't want to return to the stock ROM, I want to actually reflash the firmware, including the bootloader and everything else stored on the phone's memory I suppose. On my old Motorola Droid/Milestone that used to be an .sbf file, not sure what it would be like here.
I hope someone can help me, that would be really cool.
Grus said:
I bought my N7100 used. Plugging the phone in while turned off wouldn't lead to it displaying a battery bar that shows how much it's charged, but rather a loading circle that's crashed. Now it has developed some other oddities like Wifi not being able to be turned on in this one Deep Impact ROM, and I figured I'd finally get this stuff over with by just reflashing the stock firmware, then putting a custom ROM on it.
Only problem is, where can I find the stock firmware? And which tool could I flash it with? Are there any linux-based ones? Just to be clear, I don't want to return to the stock ROM, I want to actually reflash the firmware, including the bootloader and everything else stored on the phone's memory I suppose. On my old Motorola Droid/Milestone that used to be an .sbf file, not sure what it would be like here.
I hope someone can help me, that would be really cool.
Click to expand...
Click to collapse
1. Stock firmware and stock ROM are one and the same thing.
2. Flashing stock rom/firmware might erase data on your internal SD card. So backup the data for safekeeping.
3. Go to sammobile.com --> firmware section and search for N7100
4. You will find latest 4.4.2 firmwares in the list. Choose one from your region. If you are from India, the firmware should be N7100XXUFNI1
4. Use ODIN 3.09 to flash d firmware. Put your firmware in AP tab and start. Sit back and let Odin do the rest.
5. After flashing, your phone should boot to a language selection screen and Odin should convey PASS message.
6. After that you can follow the link given here for root procedure: http://www.ibtimes.co.uk/root-galax...d-4-4-2-kitkat-install-philz-recovery-1447891
7. Your wifi and battery icon should work fine. But you will have a kitkat bootloader. Which means downgrading below 4.4.2 would not be possible anymore.
Hit thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk
A few days ago, my samsung started to act funny. I tried to send texts, but my phone just kept saying that it was sending the texts and hours later it would tell me that it failed to send the text. I thought it was weird, but I left it alone. Then, my phone no longer let me download any apps, every time I would try to download an app it would just stay loading without actually making any progress. Finally, I got sick of it so I tried to factory reset my phone. Only now, I can't get past the T-mobile splash screen. I bought this phone off ebay about 10 months ago and when I tried to update it, I was informed that the device was modified even though it was running stock firmware (no sd card at the time). Can someone please tell me how to fix my phone? I don't exactly have the funds to get a new one.
Try re-flashing a stock ROM from sammobile.com. Just make sure that the ROM you flash is not older than the ROM currently on the phone.
If you are unsure about the ROM on your phone and there is no warranty left, you could flash a custom recovery and custom ROM too.
I agree with audit13 that you should flash the stock firmware. It's the only way to reliably troubleshoot problems such as this.
I'm assuming it's a T999 or variant. If so rather than go to sammobile.com, you can find all firmware in my thread stickied in the development section and linked in my sig. (Much Faster download and you don't have to register on another site)
As warned above, just do not flash any older firmware (if your already on 4.3) than what is on the device. Only the same or newer.
Sent from my SGH-T999 using Tapatalk