HTC Official Car Dock keeps falling off windscreen - HTC One X

HTC One X Official Car Dock keeps falling off windscreen
Anyone else experiencing this problem? It sucks initially to the windscreen, but then after a few dockings or after driving a while it keeps falling off...
I've applying some moist etc but to no avail. Any Ideas maybe?

I've just ordered one and it's due to arrive next week, Is yours still under warranty? I'd be tempted to get it exchanged.
The HTC site mentions a 'Dash board mount pad' as an alternative method of mounting.

See the thing is that I modified the dock a little bit to allow my One X + its case to fit in the dock, so I believe returning it for warranty claim is out of the question. Of course before I modified it I tested to see if it works, and it seemed 100%, that is until I started using it.
(BTW The modification was to the holder part itself, not the suction cup, so that couldn't be the problem)
I guess I'd have to try with the dashboard plate.. Thanks for your input mate..

Hope this does not sound dumb but have you cleaned the windscreen and suction cup. I drive a number of different company vans and it's like driving with cataracts, nothing sticks to the windscreens except spit and coffee

DVDL16 said:
HTC One X Official Car Dock keeps falling off windscreen
Anyone else experiencing this problem? It sucks initially to the windscreen, but then after a few dockings or after driving a while it keeps falling off...
I've applying some moist etc but to no avail. Any Ideas maybe?
Click to expand...
Click to collapse
same here its chipped the corner of my phone and put a dent on the camera lens. not happy returned it Amazon gave me a refund.

it's probably just a crappy suction cup.
i use exomount by exogear, has never fallen off, and i've used it for probably close to a year now.
it also can be stuck to almost any surface, and will securely hold any phone with upto a 5 inch screen.
reverse the mount (clip it on to vent) and use the suction cup to stick your tablet/kindle on.
it's great.

brought another official car dock came in this morning. set it up and this one stays stuck on the windscreen....
OP its definitely a faulty suction cup. i even tried the dash mouth the suction cup failed to stick to that. but this new one is great.

Related

universal phone holder for car

http://news.discovery.com/tech/oona...=referral&utm_source=pulsenews#mkcpgn=rssnws1
looks nice and simple.
might not be full-featured as our Moto car docks. but. just throwing it out there.
A similar option it’s the Exogear Exomount Universal Car Mount
This product looks very promising, and the only thing that I’ll be worried about is the quality of the suctions cups that I think it’s the key about this product.
I have been using the Exogear Exomount Universal Car Mount with my Garmin gps device and my Motorola Atrix and works great.
Doesn't really look like the hold will be up to much tapping or sliding on the screen. I guess if you just use a bluetooth headset and want to be able to SEE the screen ... Interesting design though.
I don't know, the way I fling my car around corners and stuff, I don't think Oona will be riding with me.
nunjabusiness said:
Doesn't really look like the hold will be up to much tapping or sliding on the screen. I guess if you just use a bluetooth headset and want to be able to SEE the screen ... Interesting design though.
I don't know, the way I fling my car around corners and stuff, I don't think Oona will be riding with me.
Click to expand...
Click to collapse
I got my wife one of these for her iPhone. It was one of those 9PM "oh ****" kind of purchases, because her Garmin gps crapped itself during an update the night before a trip. Got it at Wal-Mart. The cool thing is the suction cup has the sticky stuff on it as well, so I'm pretty sure it's not coming off even in a head on crash with a Mac truck. I tried it out with both my phones and even my HTC Flyer. They all stick fairly well. The first time I pulled my Droid Charge off it left the back cover attached to the mount!
barry99705 said:
I got my wife one of these for her iPhone. It was one of those 9PM "oh ****" kind of purchases, because her Garmin gps crapped itself during an update the night before a trip. Got it at Wal-Mart. The cool thing is the suction cup has the sticky stuff on it as well, so I'm pretty sure it's not coming off even in a head on crash with a Mac truck. I tried it out with both my phones and even my HTC Flyer. They all stick fairly well. The first time I pulled my Droid Charge off it left the back cover attached to the mount!
Click to expand...
Click to collapse
I had that mount as well. While the suction cup is great, the sticky material that holds the phone is not. It will quickly lose it's "stickyness." The instructions tell you to clean it with soap and water once in a while to restore the adhesive, but this will only work a few times. Also if you leave it in your car on hot days, the adhesive will begin to melt a bit. If you use it after that, the adhesive sticks to phone even after you take it off.
biggins1870 said:
I had that mount as well. While the suction cup is great, the sticky material that holds the phone is not. It will quickly lose it's "stickyness." The instructions tell you to clean it with soap and water once in a while to restore the adhesive, but this will only work a few times. Also if you leave it in your car on hot days, the adhesive will begin to melt a bit. If you use it after that, the adhesive sticks to phone even after you take it off.
Click to expand...
Click to collapse
Good to know! We've also found that when it's in the 30's the sticky doesn't work so well.

[CAR] Best unofficial car dock / phone holder

As the official dock is way too expensive imo, I thought I'd start a thread where people can post their unofficial car docks they bought and the experiences they made.
So far I came across two docks, the [CAR] Passive holder from Brodit (2nd pic)
and one I found on ebay, sent from Hong Kong (pic below): Windscreen Car mount small (1st pic with text "one X")
This one also can be bought with various different mounting options. I am not sure how easy it will be to dock and undock the phone in the mount though, looks rather tight.
I think I will wait some more days / weeks before I'll buy something.
Any other car kits you guys found?
2nd looks pretty decent for a cheap mount
Here another one, brodit active, but really ugly...
chrishull85 said:
2nd looks pretty decent for a cheap mount
Click to expand...
Click to collapse
the problem is it's being sent from HKG, if customs here decide to have a look at it I end up paying CHF 35.- (double the amount that thing costs) customs service fee, I almost might as well buy an official one
I would get this one, but I need a seller here in Europe.
Hey this one is low cost and will do the job:
ebay swivel one x holder
I used ot use it with my old DHD which now feels so ridiculously heavy!
You can mount it witht he provided suction that holds well enough.
Or if you buy some 3m automotive grade double sided tape
You can mount it on other places that don't have a smooth glass finish.
I had it stuck on plastic trim near the driver door/window.
The surface was mildly bumpy but that 3m held on well until the day I removed it.
Popping the phone in and out, and rotating it with force didn't budge it!
Out of curiosity I also purchased this one:
Those protruding clips can probably come off easily.
Some 3m on that flat surface and it will probably stick anywhere.
I like this one because it sticks out and gives a greater range of movement / angle.
Secured near the door you can have your arm rested on the seal and access the phone easily.
Unlike the official (or any other suction windscreen mounted one) which forces you to lean towards it awkwardly.
maxseemo said:
Out of curiosity I also purchased this one:
Those protruding clips can probably come off easily.
Some 3m on that flat surface and it will probably stick anywhere.
I like this one because it sticks out and gives a greater range of movement / angle.
Secured near the door you can have your arm rested on the seal and access the phone easily.
Unlike the official (or any other suction windscreen mounted one) which forces you to lean towards it awkwardly.
Click to expand...
Click to collapse
How easily can you mount and demount the phone in this one?
I am also looking into getting this one, I also already have the cradle, would you mind taking a pic without the phone in it for me to see if it would fit for my cradle (with my old mount I could simply take away the "case" which held the phone, was secured with 4 rectangular holes in roughly 2.5 cm distance to each other)?
geenyous said:
How easily can you mount and demount the phone in this one?
I am also looking into getting this one, I also already have the cradle, would you mind taking a pic without the phone in it for me to see if it would fit for my cradle (with my old mount I could simply take away the "case" which held the phone, was secured with 4 rectangular holes in roughly 2.5 cm distance to each other)?
Click to expand...
Click to collapse
Hey sorry I should have stated that I only purchased. Still waiting for it to arrive.
It does function how you describe though...
maxseemo said:
Hey sorry I should have stated that I only purchased. Still waiting for it to arrive.
It does function how you describe though...
Click to expand...
Click to collapse
Great find, thanks!
I will have to wait for it to pop up in Europe, if I buy from HKG I risk having to show it to customs which will cost me too much to justify...
and another one, shipping again from China though :
Windscreen Sunction Mount Car Holder For HTC One X S720e / HTC Endeavor
using this1 ( swivel one) with my NS at the moment and will use it with my new One X in two days once it arrive
Cheap and do the job, no need to change all the time you change phone so good. Before I use to buy a car holder for each phone I had and than sold it with but after I bought this no need as it hold all the phones very well
maxseemo said:
Hey this one is low cost and will do the job:
ebay swivel one x holder
I used ot use it with my old DHD which now feels so ridiculously heavy!
You can mount it witht he provided suction that holds well enough.
Or if you buy some 3m automotive grade double sided tape
You can mount it on other places that don't have a smooth glass finish.
I had it stuck on plastic trim near the driver door/window.
The surface was mildly bumpy but that 3m held on well until the day I removed it.
Popping the phone in and out, and rotating it with force didn't budge it!
Out of curiosity I also purchased this one:
Those protruding clips can probably come off easily.
Some 3m on that flat surface and it will probably stick anywhere.
I like this one because it sticks out and gives a greater range of movement / angle.
Secured near the door you can have your arm rested on the seal and access the phone easily.
Unlike the official (or any other suction windscreen mounted one) which forces you to lean towards it awkwardly.
Click to expand...
Click to collapse
geenyous said:
and another one, shipping again from China though :
Windscreen Sunction Mount Car Holder For HTC One X S720e / HTC Endeavor
Click to expand...
Click to collapse
This one has a hole for the camera and possibly can be used a support for shooting a video from the dashboard.
Just a thought.
rikardo1979 said:
using this1 ( swivel one) with my NS at the moment and will use it with my new One X in two days once it arrive
Cheap and do the job, no need to change all the time you change phone so good. Before I use to buy a car holder for each phone I had and than sold it with but after I bought this no need as it hold all the phones very well
Click to expand...
Click to collapse
Just ordered one on amazon myself.
Your comment about not having to change the holder all the time convinced me and also the minimalistic design / small size.
GioDoe said:
This one has a hole for the camera and possibly can be used a support for shooting a video from the dashboard.
Just a thought.
Click to expand...
Click to collapse
It can definitely be used for that (did it with my HD2 myself), but the swivel one will also not cover the camera lense.
Just don't film yourself doing anything stupid...
Arkon has a bunch of mounts for the One X, windshield mounts, dash, cupholder, they even have a micro usb lighter socket mount: http://arkon.com/htc One X/
Shady Gambino said:
Arkon has a bunch of mounts for the One X, windshield mounts, dash, cupholder, they even have a micro usb lighter socket mount: http://arkon.com/htc One X/
Click to expand...
Click to collapse
Hey thanks for finding that.
This one here is pretty much spot on to what I been looking for:
The way them brackets expand in their demo video looks like it will hold a phone even if it's in a tpu case.
They ship outside of US too but the best part is that they allow you to use your own fedex/ups account.
This is the one I purchased.
http://www.ebay.com.au/itm/160777560050?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I really like the way the suction on the windscreen works. Some of these other car mounts are horrible, they fall off after a few minutes, hours ect...
The fit of the HTC One X on the bracket is very tight, won't ever fall off.
Happy with this one.
Btw this one arrived... 6 days transit, not bad for HK.
The item is not the best though.
The neck is more stiff then my first erection when I discovered p0rn. Hard to bend.
The phone sits well tight in the bracket but putting it in feels like I'm going to damage the phone.
Not the best. Ebay didn't deliver.. usually they only have quality true? lol
Anyway, I will purchase that one from Arkon. Looks decent and can cater to multiple phones.
I've just found the following item on eBay which may be of interest to UK HOX owners:
[Unfortunately I can't post a link as I haven't posted more than 8 times on this forum]
Search eBay for item no: 360454478820
£5.95 free postage within 2-3 working days.
Looks to be the same item/design as the on in the OP
I'll be placing my order today and will post again with feedback hopefully by the end of the week
not bad this is, use to have one of these for my old HTC HD2
only problem is when you change your phone for something different,new than you have to sell this with the phone and buy a new one again.
So I've decide to go for some universal accessories as I was tired of changing the holders,dockings, chargers all the time. Especially in car access. as I always ended with reinstalling cabels, holders, etc..
But good solution for someone who don't mind to change or who's not changing phones often
andygatford said:
I've just found the following item on eBay which may be of interest to UK HOX owners:
[Unfortunately I can't post a link as I haven't posted more than 8 times on this forum]
Search eBay for item no: 360454478820
£5.95 free postage within 2-3 working days.
Looks to be the same item/design as the on in the OP
I'll be placing my order today and will post again with feedback hopefully by the end of the week
Click to expand...
Click to collapse
Sent from my Transformer TF101 using XDA
maxseemo said:
The phone sits well tight in the bracket but putting it in feels like I'm going to damage the phone.
Click to expand...
Click to collapse
Could you check the back of the phone holder itself, I ordered one just like yours and it has 'G21' stamped on the back. (G21 is the Sensation XL)
I can manage to get the phone in, but the fit is so tight I'm scared the screen will crack when I hit the first bump in the road...
maxseemo said:
The way them brackets expand in their demo video looks like it will hold a phone even if it's in a tpu case.
They ship outside of US too but the best part is that they allow you to use your own fedex/ups account.
Click to expand...
Click to collapse
Yeah, it'll definitely fit with a TPU case as long as it's not super thick.

car mount for cold weather

I live in canada, and therefore, have to deal with below freezing temps. The issue I have right now is trying to find a car mount that does not utilize that cheap plastic tab in the middle of the sgs2 to hold it in the mount. I have purchased 2 different types on ebay, and both have had that tab snap off due to the cold weather making the plastic brittle. Does anyone know of a product somewhere that has that clip either on a spring hinge, and one that uses a metal clip that wont break in cold weather?
colinlinton said:
I live in canada, and therefore, have to deal with below freezing temps. The issue I have right now is trying to find a car mount that does not utilize that cheap plastic tab in the middle of the sgs2 to hold it in the mount. I have purchased 2 different types on ebay, and both have had that tab snap off due to the cold weather making the plastic brittle. Does anyone know of a product somewhere that has that clip either on a spring hinge, and one that uses a metal clip that wont break in cold weather?
Click to expand...
Click to collapse
I used to own a classic Mini, anyone that has owned one will tell you there is not really any protection inside unlike a modern car.
I used a exogear - exomount in it over winter (-6c for a week was the lowest where I live) and no cracking/snapping or loss of suction.
Its a really great mount, someone posted up about it in here somewhere and Ive loved it ever since.
Here, in Poland, i had a maybe similar issue, the temperatures get from freezing cold to melting hot, always any holder gets broken or just falls off from the window due to the temperatures deforming the sucker. Now im using a Spiderpodium and i can totally reccomend it, if you got a vent near enough to allow you to see the screen without any trouble then that might do the job for you. As an additional pros the vent with air conditioning keeps the phone cool all the time. About a traditional car mount then you could maybe try a universal mount, phone doesnt need to be squeezed into such so there are zero parts that could break off.
Hi,
im using this product ordered from eBay, this is by far the best holder i had, and i tried about 4:
http://www.ebay.com/itm/Universal-C...685656?pt=PDA_Accessories&hash=item27c9391418
didn't try it in a cold weather. i live in Israel and i bought this product this summer. during summer the temperatures can get to close to 40 degrees in the place i live (probably higher inside the car).
in a few occasions my car was in direct sunlight all noon, when i got back to the car the suction cup was a little bit loose, but after a few moments when the car cools down the suction cup is strong again.
it can be rotated 360 degrees, it doesn't wobble and make noise during driving and the suction cup is very strong, never fell of the windshield.
Why not get a proper mount for your phone ? I'm using a Brodit one and it's very tough even when offroading (not mounted on windscreen, but mounted with screws). It fits and holds the phone just great.
All variants for the S2 are here, there's even an adjustable one in case you use a skin case.

Car mount... vent vs dash?

I'm looking to get a car mount for my Nexus 5, but I'm not sure which style to go with. My dad has the Aduro u-grip and likes it, but he says it has fallen off his dash a couple times. He doesn't use the 3M tape though, so I imagine that could stick it more permanently.
http://www.amazon.com/Aduro-Univers...GLF8/ref=sr_1_2?ie=UTF8&qid=1405607983&sr=8-2
I've also seen options that fit on your vent.
http://www.amazon.com/Kenu-Airframe...1B4W/ref=sr_1_1?ie=UTF8&qid=1405608084&sr=8-1
The vents in my car are fairly close together, so I'm a little concerned about that fitting.
I haven't really seen many of the traditional windshield mount options, but I never had much success with those sticking well anyway.
Any thoughts on the two I posted plus other possibilities?
raptir said:
I'm looking to get a car mount for my Nexus 5, but I'm not sure which style to go with. My dad has the Aduro u-grip and likes it, but he says it has fallen off his dash a couple times. He doesn't use the 3M tape though, so I imagine that could stick it more permanently.
http://www.amazon.com/Aduro-Univers...GLF8/ref=sr_1_2?ie=UTF8&qid=1405607983&sr=8-2
I've also seen options that fit on your vent.
http://www.amazon.com/Kenu-Airframe...1B4W/ref=sr_1_1?ie=UTF8&qid=1405608084&sr=8-1
The vents in my car are fairly close together, so I'm a little concerned about that fitting.
I haven't really seen many of the traditional windshield mount options, but I never had much success with those sticking well anyway.
Any thoughts on the two I posted plus other possibilities?
Click to expand...
Click to collapse
Hello,
The one that your dad has is awful, it won't stick even with the 3M tape/disk. As for the second one, I used with a smaller phone and it worked fine, but I think it might be a tight fit for the N5, especially if you use a case.
I currently have these two:
http://www.amazon.com/iOttie-Windsh...ie=UTF8&qid=1405608590&sr=8-5&keywords=iottie
http://www.amazon.com/iOttie-Univer...ie=UTF8&qid=1405608655&sr=8-7&keywords=iottie
The first one is in my car, the other one in my wife's. I particularly like mine, as it is easier to get the phone in and out. Also, you won't need the 3M tape. iOttie uses an special type of suction cup that attaches to virtually anything. I will also like to mention that both mounts have fallen a couple of times, during the winter time, but I am talking about really cold temperatures. You can put them in the windshield as well as in the dashboard, but I don't like to put them in the windshield, because I mostly listen to music through my phone and it is kind of far away to use for me.
Regarding the vent mounts, I have used them in the past with other phones, and there is just one major benefit in my opinion. When you are using the navigation app, the phone tends to get really hot and if you are listening to music is even worse. With your phone in the vent, that won't be an issue, even during the winter. The only con I can think of is that some of those vent mounts won't have a strong hold in your phone, so if you hit a big bump in the road the phone might come out.
I hope this helps.
cgjjaf said:
Regarding the vent mounts, I have used them in the past with other phones, and there is just one major benefit in my opinion. When you are using the navigation app, the phone tends to get really hot and if you are listening to music is even worse. With your phone in the vent, that won't be an issue, even during the winter. The only con I can think of is that some of those vent mounts won't have a strong hold in your phone, so if you hit a big bump in the road the phone might come out.
I hope this helps.
Click to expand...
Click to collapse
Yeah, that's why I was looking at vent mounts. My old HTC Incredible would overheat if I didn't position my one vent in such a way as to blow cold air on it. Unfortunately in my new car the vents can't angle to blow cold air on where the phone would be in a window or dash mount.
I have a Kenu Airframe and am a huge fan. I've had it for a little over a year. Excellent product.
atoy74 said:
I have a Kenu Airframe and am a huge fan. I've had it for a little over a year. Excellent product.
Click to expand...
Click to collapse
+1 on the Kenu, but I used it with the Nexus5 Qi charger. See this thread:
http://forum.xda-developers.com/goo...es/kenu-airframe-n5-wireless-charger-t2573184
It's very convenient to have the N5 magnetically mounted. I tried without the magnetic charger, it's a bit hard to insert/remove the phone from the Kenu mount.
I use a vent clip one I picked up from Wally-World. It worked fine for the last three phones I've had. $15.

Best universal car suction mount for < $20

Hi guys,
I've gone through a few generic mounts of eBay and unfortunately none have lasted me more than a few months. I've tried the design that consists of the round suction area and round mount, and the cheap claw style mount.
I know there must be a perfect one out there. What I'd like is one that has minimal vibration, strong suction, great build quality and NFC would be a nice bonus.
Does anyone have any suggestions?
What exactly has failed with the previous mounts?
surprising nobody responded to this one, anybody got a good experience with mounts?
I asked for more details about his previous experiences, without any reason... What else could I have said more? Maybe you, @sam008 could add something and we could continue the discussion from there.
PS: I have some experience with mounts.
Well the issue I've had and most people see as well is the suction has a very short life. In a few months, when driving, the phone just falls off and you have to re-attach it
That behaviour is rather normal. It's rather hard to create a plastic (rubber, silicone or whatever it is) that can resist in the sun. Even the suction cup that came with a Garmin (which might be considered above generic suction cups) fell down after a few weeks. Imagine that that suction cup is constantly pulled on and the longer the arm (I've seen 20-30 cm or almost one foot long arms) the worse it is. Not to mention that the phone will balance more.
That is why I tend to avoid suction cups and prefer vent or CD slot mounted holders, with as short as possible arms.
Vent mounted holders also have the advantage that during summer the phone will be cooled down by the car's A/C.
One of these days I'll come back with a few opinions about what I tried until now.
Even my iOttie dock couldn't handle the Texas heat! Not only did it keep falling off, whatever the suction cup is made of came apart and left a sticky goo all over my windshield. Now I use a CD mount that is below the dash and gets cold AC blown on it to help keep the phone cool.
At first I used a cheap suction cup holder. It was OK, but the phone was a little bit too far away from me. It used to fall every now and then, but not too often. But then again, Eastern Europe is not Texas. Some venting would have been welcome anyway.
Then I used a CD slot holder. It was pretty OK, A/C was blowing on the back of the phone (small clamp). But it used to resonate sometimes with the car at around 110 km/h.
Then I switched cars and broke the CD slot holder so I could use a vent holder and I did. The clamp is a bit big on this one, so the A/C is not that efficient, but it goes. Actually this one is made up of two holders, the clamp from one and the claws (that go in the vent) from another.
I tried a very small one for a few minutes (bought it from a mall and promptly returned it after I tried it in the parking lot) but it looks like it doesn't even have a chance of being stable.
Now I am using the amazon bought combo, but I might switch back to CD vent.
The linked pictures are as example only. The amazon links are the actual products.
In the end I recommend something that can easily enjoy the A/C and with a very short arm. Be careful that some car brands (like my old Fiesta) don't allow the air flow to be turned off while the vent's fins are used for the phone holder.

Categories

Resources