I bought a used nexus its in great condition everything works but the buyer didnt tell me it was rooted already. Thats fine cause i was going to but i wanted to learn the ropes myself. So is there anyone to get back to 100% stock? He flashed a CWM too. I just want to do it myself. And is there anyway to wipe format the internal memory aswell? Thanks!
you can use this guide : http://forum.xda-developers.com/showthread.php?t=1626895
even if you don't want to convert and already have yakju or takju, this is the way you can go back to pure stock
bgdxv said:
you can use this guide : http://forum.xda-developers.com/showthread.php?t=1626895
even if you don't want to convert and already have yakju or takju, this is the way you can go back to pure stock
Click to expand...
Click to collapse
Yup this guide is the way to go. Flash the "takju" images. There's full 4.1.1 images now too.
Thanks guys i have a usa gsm model and I guess i looked around and found out a way to wipe the internal data with those tools so i think im good and im kinda getting the hang of using the tool kit. But the phone has 4.1 i wanted to install rooted 4.1.1 is that possible? or how would i go about doing that? Thanks alot for your quick and helpful responses!
Nocturnal86 said:
Thanks guys i have a usa gsm model and I guess i looked around and found out a way to wipe the internal data with those tools so i think im good and im kinda getting the hang of using the tool kit. But the phone has 4.1 i wanted to install rooted 4.1.1 is that possible? or how would i go about doing that? Thanks alot for your quick and helpful responses!
Click to expand...
Click to collapse
Don't use a toolkit. Follow that guide posted. That guide will wipe the device completely and put you on 100% stock 4.1.1. If you want root, you can follow the last part of the guide, which has a step-by-step routine to root also.
martonikaj said:
Don't use a toolkit. Follow that guide posted. That guide will wipe the device completely and put you on 100% stock 4.1.1. If you want root, you can follow the last part of the guide, which has a step-by-step routine to root also.
Click to expand...
Click to collapse
Why shouldnt i use the tools? they seem pretty straight foward is there something bad about them? But Im finally going to get a chance to follow that guide hopefully and go to 4.1.1 and then root it cause i just want root right now for back up purposes. But thans for the info!
Nocturnal86 said:
Why shouldnt i use the tools? they seem pretty straight foward is there something bad about them? But Im finally going to get a chance to follow that guide hopefully and go to 4.1.1 and then root it cause i just want root right now for back up purposes. But thans for the info!
Click to expand...
Click to collapse
The tools aren't inherently bad, but they're kind of a "black box" to new users, where they put their phone in and it comes out rooted/flashed. The issue occurs when something goes wrong, and the user doesn't know why because they don't understand the procedure, and they can't reverse engineer what happened to fix it. So what they end up doing is coming and posting threads, etc.
If they were doing it the "real" (manual) way, via Fastboot, they'd know what was going on and have a better understanding of what they're doing to their phone. Because we have a Nexus, there's really no reason not to just use Fastboot because it's the tool that Google gives us. You own a ~$650 (much cheaper now w/ the Play Store, but still) device, why not spend 15 minutes learning how to work with it properly?
martonikaj said:
The tools aren't inherently bad, but they're kind of a "black box" to new users, where they put their phone in and it comes out rooted/flashed. The issue occurs when something goes wrong, and the user doesn't know why because they don't understand the procedure, and they can't reverse engineer what happened to fix it. So what they end up doing is coming and posting threads, etc.
If they were doing it the "real" (manual) way, via Fastboot, they'd know what was going on and have a better understanding of what they're doing to their phone. Because we have a Nexus, there's really no reason not to just use Fastboot because it's the tool that Google gives us. You own a ~$650 (much cheaper now w/ the Play Store, but still) device, why not spend 15 minutes learning how to work with it properly?
Click to expand...
Click to collapse
I can understand that and i usually do want to learn the ropes but i was kind of thrust into the middle cause i bought a used nexus and it was rooted and had CWM 6 flashed to it so I am just trying to figure things out a bit or at least go back to Full stock and no recovory flashed so i can learn the ropes myself and flash recoverys myself if needed and i want to get 4.1.1 and root it myself. If possible can i use the tools to just go to stock and then learn the manual ways from there? I got adb and the fastboot.exe finally so i never had that or new i needed it and when i first used the toolkit to wipe my sd I think it installed some drivers that the tool kit told me to which im hoping are correct. I really hate to ask questions unless its needed and i apprecieate it.
Nocturnal86 said:
I can understand that and i usually do want to learn the ropes but i was kind of thrust into the middle cause i bought a used nexus and it was rooted and had CWM 6 flashed to it so I am just trying to figure things out a bit or at least go back to Full stock and no recovory flashed so i can learn the ropes myself and flash recoverys myself if needed and i want to get 4.1.1 and root it myself. If possible can i use the tools to just go to stock and then learn the manual ways from there? I got adb and the fastboot.exe finally so i never had that or new i needed it and when i first used the toolkit to wipe my sd I think it installed some drivers that the tool kit told me to which im hoping are correct. I really hate to ask questions unless its needed and i apprecieate it.
Click to expand...
Click to collapse
The guide that was linked earlier is extremely simple to follow. It breaks everything down step by step, and you will be fully stock.
Related
I have just bought a defy and want to root it. Im not too keen on Motoblur and want to get rid of it if it is possible! However, I have never rooted a phone in my life. I have noticed that there are a few roms knocking around for this phone.Cyanogenmod and Gingerbread Android 2.3.4. Which is the best one? I will also need an idiot proof tutorial if anyone would be good enough to point me in the right direction. I would be very appreciated. Thanks in advance guys but Im a bit.....
cyanogenmod 7 is the best..it is stable and its nice..
http://forum.xda-developers.com/showthread.php?t=1065798
follow this link..it has everything u need to know to install CM7..
To root follow this tutorial
http://www.addictivetips.com/mobile/how-to-root-motorola-defy-with-superoneclick/
All the best
arpith.fbi said:
cyanogenmod 7 is the best..it is stable and its nice..
http://forum.xda-developers.com/showthread.php?t=1065798
follow this link..it has everything u need to know to install CM7..
To root follow this tutorial
http://www.addictivetips.com/mobile/how-to-root-motorola-defy-with-superoneclick/
All the best
Click to expand...
Click to collapse
Thanks arpith.fbi . I will have a go at it when Im awake and refrreshed (ive been working nights lol). Will this remove the t-mobile branding? Ive already had the device unlocked but it still has the t-mobile logo popping up on start up etc. Thanks arpith.fbi. Your help is very much appreciated
yea..no tmobile crap..u can customize the way u want..check it out
TudorBlue said:
Thanks arpith.fbi . I will have a go at it when Im awake and refrreshed (ive been working nights lol). Will this remove the t-mobile branding? Ive already had the device unlocked but it still has the t-mobile logo popping up on start up etc. Thanks arpith.fbi. Your help is very much appreciated
Click to expand...
Click to collapse
Flashing a custom rom like Cyanogenmod will remove the t-mobile logo at bootup.
Before you start flashing a rom I'd recommend you to first browse some of the threads and to read some tutorials and FAQ's.
Jaflo said:
Flashing a custom rom like Cyanogenmod will remove the t-mobile logo at bootup.
Before you start flashing a rom I'd recommend you to first browse some of the threads and to read some tutorials and FAQ's.
Click to expand...
Click to collapse
I assume I need to root my phone first and foremost? I will use SuperOneClick as this looks quiet easy to do, even for me.
Oops I forgot to add thgat my defy is on 2.51. Will this be a problem??? I want to be sure that I dont screw up my new phone. Cheers
I suggest you go to a stock 2.2.2 via MSU or RSD Lite. For your locale. Try it for a while (- the GB retail is very good). You don't need to root to do that, and it is fairly easy and safe.
You could then try and remove the Blur stuff and some bloat after rooting. Plenty of guidance around. This will increase your familiarity and experience, which you lack by your own admission.
If this doesn't give you what you want, then try a Custom ROM. Note that no 2.3 Custom ROM presently provides a "100%" experience. It may be that you need something they cannot yet deliver... I'm not sure why you desperately need to do this, not having tried 2.2?
Take things one step at a time and don't rush.
LenAsh said:
I suggest you go to a stock 2.2.2 via MSU or RSD Lite. For your locale. Try it for a while (- the GB retail is very good). You don't need to root to do that, and it is fairly easy and safe.
You could then try and remove the Blur stuff and some bloat after rooting. Plenty of guidance around. This will increase your familiarity and experience, which you lack by your own admission.
If this doesn't give you what you want, then try a Custom ROM. Note that no 2.3 Custom ROM presently provides a "100%" experience. It may be that you need something they cannot yet deliver... I'm not sure why you desperately need to do this, not having tried 2.2?
Take things one step at a time and don't rush.
Click to expand...
Click to collapse
I will take your advice. What do I need to do to remove branding and bootlogo? I assume MSU stands for Motorola Software Update. What is RSD lite? How do I use either of them to remove the network branding? I know these questions are probably seem idiotic to you guys as you are the experts but this is my first adroid and I need to start at the beginning so any help with this is very much appreciated.
You have to learn all the basics at the development forum threads before making any changes to your phone.
I suggest you to root your phone, install 2nd Init (http://forum.xda-developers.com/showthread.php?t=1032212) and make a full backup before you get the party started.
You can debrand you phone (including the bootlogo) if you install a custom rom.
The questions you've asked are already answered on the forum in a better way than I could do.
So start trying to use the search tools and don't forget to read the forum rules.
I'm a newbie here too, and following these advices I didn't get in trouble yet...
I still suggest, as you are new to Android and phone hacking, that you take small steps and learn about Android before hacking. I'm not sure why you have a branded phone - why not just get a retail one?
LenAsh said:
I still suggest, as you are new to Android and phone hacking, that you take small steps and learn about Android before hacking. I'm not sure why you have a branded phone - why not just get a retail one?
Click to expand...
Click to collapse
It was cheaper than buyiong an unbranded version. Im reading up on it now and I think Im starting to pick things up a little. Android seems to be a lot more complicated than an iphone but Im getting there.................slowely
LenAsh said:
I suggest you go to a stock 2.2.2 via MSU or RSD Lite. For your locale. Try it for a while (- the GB retail is very good). You don't need to root to do that, and it is fairly easy and safe.
You could then try and remove the Blur stuff and some bloat after rooting. Plenty of guidance around. This will increase your familiarity and experience, which you lack by your own admission.
If this doesn't give you what you want, then try a Custom ROM. Note that no 2.3 Custom ROM presently provides a "100%" experience. It may be that you need something they cannot yet deliver... I'm not sure why you desperately need to do this, not having tried 2.2?
Take things one step at a time and don't rush.
Click to expand...
Click to collapse
I made a mistake, the firmware version is 2.2.2. Right where do I start. I think I will debrand it first.
I followed this to debrand:
http://forum.xda-developers.com/showthread.php?t=853674
And then this to root:
arpith.fbi said:
...
To root follow this tutorial
http://www.addictivetips.com/mobile/how-to-root-motorola-defy-with-superoneclick/
...
Click to expand...
Click to collapse
Everything works fine.
I have now debranded it. RSDLite wouldnt work on my windows 7 desk top through. I followed the debranding tutorial to the letter but my defy wouldnt show up. I used my Vista laptop and it worked first time. It was actually quite easy. I do have another question though. I have debranded my defy and no longer have the t-mobile boot logo on start up. However, when I go into my menu, I do still have t-mobile widgets. How do I get rid of them?? I have tried dragging and dropping them into the waste bin but as soon as I got back into the menu, the widgets have returned. Its not a big issue but I would like to get rid of them if possible. Thanks in advance guys (again)
most probly u flashed a t-mobile sbf..other retail sbf wont show t-mobile widgets..anyways u can remove them with root explorer..its quite easy..
arpith.fbi said:
most probly u flashed a t-mobile sbf..other retail sbf wont show t-mobile widgets..anyways u can remove them with root explorer..its quite easy..
Click to expand...
Click to collapse
I flashed it with the UK Retail .SBF , version 2.2.2 service flash. Because I was already on 2.2.2. I went for the same version number. Im sure you klnow the one but here is the link.
http://and-developers.com/sbf:defy
Would it do any harm if I went for another version??
no no..2.2.2 is fine...anyways use root explorer to get rid of those crap..
the best way to clean install is to enter Stock Recovery, then do "Wipe data/Factory reset" and "Wipe cache" and then flash an sbf...this will wipe "everything" and will install freshly..
arpith.fbi said:
no no..2.2.2 is fine...anyways use root explorer to get rid of those crap..
the best way to clean install is to enter Stock Recovery, then do "Wipe data/Factory reset" and "Wipe cache" and then flash an sbf...this will wipe "everything" and will install freshly..
Click to expand...
Click to collapse
How do you enter stock recovery? Do you mean on the device itself?
Edit............Its ok, Ive susssed it out. I had to press trhe volume keys up and down simultaniously. This stuff is not that difficult to do once you get started and read through everything.
Greetings XDA peeps,
I just purchased the Gnex last week and have loved the stock rom but felt the need for more customization (Not sure why im saying this as it is a given.. )
I found the Wugfresh Galaxy Nexus Root Toolkit v1.3 and studied how to use it and read through the post/instructions for a week until I fully understood what was going on and flashed Codename Android http://forum.xda-developers.com/showthread.php?t=1479569
I installed my proper drivers and used device manager to get everything straightened away, and made sure fastboot and adb were recognized before doing anything ( I should probably get educated on what exactly ADB and fastboot actually mean...googling now)
Since then I haven't been able to boot my phone and have no idea how to revert back to stock or push the original contents onto my device to just simply start from square one. I know how to do it with ODIN (or I did on my SGS2 Sprint)
For the love of god someone shed some light on this situation please =] I did search btw..couldn't find what I was looking for.
Still new to this, just restored my CWM backup and my phone finally booted.
I guess I overlooked something somewhere...I never checked to see what kernel that rom required as I should still be on stock but I have to find out how to check which kernel I am on.
Im assuming the majority of roms require the stock kernel though?
Familiar Joe said:
Greetings XDA peeps,
I just purchased the Gnex last week and have loved the stock rom but felt the need for more customization (Not sure why im saying this as it is a given.. )
I found the Wugfresh Galaxy Nexus Root Toolkit v1.3 and studied how to use it and read through the post/instructions for a week until I fully understood what was going on and flashed Codename Android http://forum.xda-developers.com/showthread.php?t=1479569
I installed my proper drivers and used device manager to get everything straightened away, and made sure fastboot and adb were recognized before doing anything ( I should probably get educated on what exactly ADB and fastboot actually mean...googling now)
Since then I haven't been able to boot my phone and have no idea how to revert back to stock or push the original contents onto my device to just simply start from square one. I know how to do it with ODIN (or I did on my SGS2 Sprint)
For the love of god someone shed some light on this situation please =] I did search btw..couldn't find what I was looking for.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1394051
here you go, keep this just in case for next time
DAMNIT I hate when I fail to find something on my own, very much appreciated this is exactly what I was looking for
Familiar Joe said:
DAMNIT I hate when I fail to find something on my own, very much appreciated this is exactly what I was looking for
Click to expand...
Click to collapse
lol its cool , dont worry im not one of those @$$holes that gets mad because someone cant find something . i overlook things on this forum all the time, and if i can help someone out, im going to do it , and not give them an attitude
Sorry for being noobish, just got a nexus, UK and it's on 4.0.1, been reading a lot, and very much overwhelmind, now, coming from my galaxy s2, which, I had been used to flashing and routing daily. I managed to use the toolkit, to root my phone, smashing app, will definitely donate, to the dev, as i managed to root, in pretty much 5mins. My problem is, whats the best route, to follow, in order for me to have the latest stock 4.0.4, because I have read a lot of stuff, so now muddled as to what path to take. Is it a matter, of just downloading the official rom, in the general section, and flashing it via custom recovery, sorry for the noobish questions, it's been a long day, trying to get to know the phone, am sure, if someone can help me from here, all be fine. I also tried to seek for an update, under about, but phone says am on latest firmware, which is 4.0.1,so appreciate your guidance please.
marvi0 said:
Sorry for being noobish, just got a nexus, UK and it's on 4.0.1, been reading a lot, and very much overwhelmind, now, coming from my galaxy s2, which, I had been used to flashing and routing daily. I managed to use the toolkit, to root my phone, smashing app, will definitely donate, to the dev, as i managed to root, in pretty much 5mins. My problem is, whats the best route, to follow, in order for me to have the latest stock 4.0.4, because I have read a lot of stuff, so now muddled as to what path to take. Is it a matter, of just downloading the official rom, in the general section, and flashing it via custom recovery, sorry for the noobish questions, it's been a long day, trying to get to know the phone, am sure, if someone can help me from here, all be fine. I also tried to seek for an update, under about, but phone says am on latest firmware, which is 4.0.1,so appreciate your guidance please.
Click to expand...
Click to collapse
Follow the directions here. Note that this will wipe your data...
efrant said:
Follow the directions here. Note that this will wipe your data...
Click to expand...
Click to collapse
Phew cheers buddy, haven't tried this yet, as at work, will give it a short when I get home, anything easier than this please, as i just have a forbia for anything called adb please? Also, don't understand why my device is still on 4. 0. 1, been hitting the update button continously with no luck, but prepared to use other means, as suggested above, to get the device updated. Thanks again in advance.
marvi0 said:
Phew cheers buddy, haven't tried this yet, as at work, will give it a short when I get home, anything easier than this please, as i just have a forbia for anything called adb please? Also, don't understand why my device is still on 4. 0. 1, been hitting the update button continously with no luck, but prepared to use other means, as suggested above, to get the device updated. Thanks again in advance.
Click to expand...
Click to collapse
You CAN flash factory images through the toolkit you know. You can download them at Google, put them in the correct subfolder of the GNEX toolkit folder and flash away. In order to do that you do have to have an unlocked bootloader and you will loose your root. Unlocking the bootloader will loose all your data (including under the SDCARD folder (so everything you stored will be gone)!. Rooting can be done again through the toolkit...
Or you can download a different flashable zip file that you can flash from CWM recovery.
Hmm thanks this looks more like my sort of of a thing "different flashable zip file that you can flash from CWM recovery.", were can i find this please?. Thanks.
Right, from the top, I'm a retard and shouldn't have messed with ROM's and custom recovery whilst blindly following a guide (I cant remember which guide, so mistake #1). I have a Telstra (Australian) Galaxy Nexus. I followed a guide to put CWM, Jelly Bean and root on, however I ran into a few problems and wanted to revert to my stock ROM, well I never performed a backup of my original ROM (mistake #2). I went looking and someone posted a Telstra stock ROM in CWM backup form here on xda, I successfully restored it and am *mostly* happy with the results, however no I cannot recieve OTA updates, which seems to be due to the prop file and others assert failing. Basically, I've learnt my lesson and want to be a good boy and go back to a non-root, completely out of the box state so if in the future, I need to return the phone for warranty, I can without fear of recourse for messing with the phone.
So again, I'm a tard, but can you help me?
EDIT: Mistake #3, I went back through my downloads and found the files I used from the guide I cant find to show you, but it DID involve Busybox which I have since read screws **** up.
http://forum.xda-developers.com/showthread.php?t=1626895
alll you need to know
atifsh said:
http://forum.xda-developers.com/showthread.php?t=1626895
alll you need to know
Click to expand...
Click to collapse
I've been over that thread twice now and cant find the Return to Stock instructions, am I blind? (happy to be proven wrong)
Syn3rgi3 said:
Right, from the top, I'm a retard and shouldn't have messed with ROM's and custom recovery whilst blindly following a guide (I cant remember which guide, so mistake #1). I have a Telstra (Australian) Galaxy Nexus. I followed a guide to put CWM, Jelly Bean and root on, however I ran into a few problems and wanted to revert to my stock ROM, well I never performed a backup of my original ROM (mistake #2). I went looking and someone posted a Telstra stock ROM in CWM backup form here on xda, I successfully restored it and am *mostly* happy with the results, however no I cannot recieve OTA updates, which seems to be due to the prop file and others assert failing. Basically, I've learnt my lesson and want to be a good boy and go back to a non-root, completely out of the box state so if in the future, I need to return the phone for warranty, I can without fear of recourse for messing with the phone.
So again, I'm a tard, but can you help me?
EDIT: Mistake #3, I went back through my downloads and found the files I used from the guide I cant find to show you, but it DID involve Busybox which I have since read screws **** up.
Click to expand...
Click to collapse
As I understand it, you should just be able to re-apply a stock GSM ROM to your Galaxy Nexus to get back to the original state of things. That's the whole point of a Nexus - it's stock with no customisations etc. It sounds like you'll have start from the very beginning and reinstall apps etc. but I guess you've already bitten that bullet, and presumably you're happy with your current ROM configuration?
It's not clear what recovery you have installed at the moment. You've made mention of CWM ... Clockwork Mod recovery possibly installed in that case? Again, as I understand it, Clockwork Mod recovery means you can't <s>receive</s> apply OTA updates. If you're on a stock ROM you should still receive notification about them though? If you are truly on stock, but have the Clockwork Mod recovery installed you can reinstall the stock boot recovery image. You should be able to find the stock images via a google search easily enough.
Once you've determined which recovery you currently have installed you'll have a better idea of how to get back to stock everything.
Above all, don't panic
PS I could add that busybox doesn't screw stuff up ... it just allows you to screw things up
Hi there,
the most simple way to go back to stock is using the GNex-Toolkit (to be found here http://forum.xda-developers.com/showthread.php?t=1392310) downloading the stock image here https://developers.google.com/android/nexus/images. Almost no chance to mess up your phone with this tool.
real_becksaufex said:
Hi there,
the most simple way to go back to stock is using the GNex-Toolkit (to be found here http://forum.xda-developers.com/showthread.php?t=1392310) downloading the stock image here https://developers.google.com/android/nexus/images. Almost no chance to mess up your phone with this tool.
Click to expand...
Click to collapse
Given a bit more research, I want to be able to get rid of Clockworkmod so I can receive OTA updates again.
Syn3rgi3 said:
Given a bit more research, I want to be able to get rid of Clockworkmod so I can receive OTA updates again.
Click to expand...
Click to collapse
yeah and if tried the tool, you would have seen, that there is an option to flash stock recovery to your phone. you can also disable the bootloader again.
choose your model/build perform action 7 --> option 3 and your back on stock recovery
real_becksaufex said:
yeah and if tried the tool, you would have seen, that there is an option to flash stock recovery to your phone. you can also disable the bootloader again.
choose your model/build perform action 7 --> option 3 and your back on stock recovery
Click to expand...
Click to collapse
I executed that successfully however CWM still exists =/
Syn3rgi3 said:
I've been over that thread twice now and cant find the Return to Stock instructions, am I blind? (happy to be proven wrong)
Click to expand...
Click to collapse
Seriously? The instructions in the first post...
Sent from my Galaxy Nexus using Tapatalk 2
real_becksaufex said:
yeah and if tried the tool, you would have seen, that there is an option to flash stock recovery to your phone. you can also disable the bootloader again.
choose your model/build perform action 7 --> option 3 and your back on stock recovery
Click to expand...
Click to collapse
Disable bootloader?
Pressed from my Maguro
efrant said:
Seriously? The instructions in the first post...
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
This still doesn't solve the problem I have in regard to not having the original Telstra (yakjudv) ROM.
Syn3rgi3 said:
This still doesn't solve the problem I have in regard to not having the original Telstra (yakjudv) ROM.
Click to expand...
Click to collapse
I few things:
1) If you can find a backup of a yakjudv ROM from some Australian user, I'd be happy to help you restore it; but
2) You do realize that yakjudv is still on 4.0.4 (ICS) and not Jelly Bean, right? And you do realize that it only recently (past few weeks) got updated to 4.0.4 while yakju has been on 4.0.4 since March?
3) You do realize that yakju is stock, and the factory images provided by Google are the "stock" ones that get updated first. yakjudv is a Samsung build, not a stock Google build.
LOL, Telstra
Syn3rgi3 said:
Right, from the top, I'm a retard and shouldn't have messed with ROM's and custom recovery whilst blindly following a guide (I cant remember which guide, so mistake #1). I have a Telstra (Australian) Galaxy Nexus. I followed a guide to put CWM, Jelly Bean and root on, however I ran into a few problems and wanted to revert to my stock ROM, well I never performed a backup of my original ROM (mistake #2). I went looking and someone posted a Telstra stock ROM in CWM backup form here on xda, I successfully restored it and am *mostly* happy with the results, however no I cannot recieve OTA updates, which seems to be due to the prop file and others assert failing. Basically, I've learnt my lesson and want to be a good boy and go back to a non-root, completely out of the box state so if in the future, I need to return the phone for warranty, I can without fear of recourse for messing with the phone.
So again, I'm a tard, but can you help me?
EDIT: Mistake #3, I went back through my downloads and found the files I used from the guide I cant find to show you, but it DID involve Busybox which I have since read screws **** up.
Click to expand...
Click to collapse
DO NOT GET YAKJUDV!!! Try and just get Yakju, Then you will get your updates from Google NOT Telstra. You don't need the Telstra stock rom, you can use Google's Yakju. I have a Telstra one and I get updates from google because I put Yakju. You will need to flash the ROM though your pc. I have been through what you have with the exact phone (Telstra one), If you need any help you can PM me
I agree with the post from Atifsh.
The guide offered by Efrant gives you, step by step, everything you need to reach your goal.
Contrary to your case I did not need to change the factory ROM but I applied the rest of the guide (for instance post 855 in Efrant thread shows what I did).
Since I want to learn I refuse, so far, to rely on a toolkit.
I deeply share Efrant philosophy of learning. And I agree on the purpose of the XDA forum. It is not a walking clinic, it is a hospital implementing new medecines:laugh:.
Finally, taking into account my age I am closer to the hospital than to the clinic.
Thanks to Efrant and few others I am doing "stuff" I did not know I could do.
And, yes I am over the time I used to want and get everything at once.
efrant said:
I few things:
1) If you can find a backup of a yakjudv ROM from some Australian user, I'd be happy to help you restore it; but
2) You do realize that yakjudv is still on 4.0.4 (ICS) and not Jelly Bean, right? And you do realize that it only recently (past few weeks) got updated to 4.0.4 while yakju has been on 4.0.4 since March?
3) You do realize that yakju is stock, and the factory images provided by Google are the "stock" ones that get updated first. yakjudv is a Samsung build, not a stock Google build.
Click to expand...
Click to collapse
I understand all the benefits of yakju, however I want to revert to yakjudv if for any reason in the future I require warranty (the phone is under contract).
I do in fact have a 4.0.1 Nandroid backup from another user on Telstra, I went ahead and restored it through CWM and everything was fine, except I still cannot receive OTA updates, doing some reading finds I need to get rid of CWM and revert to stock recovery, so how do I do this?
Syn3rgi3 said:
I understand all the benefits of yakju, however I want to revert to yakjudv if for any reason in the future I require warranty (the phone is under contract).
I do in fact have a 4.0.1 Nandroid backup from another user on Telstra, I went ahead and restored it through CWM and everything was fine, except I still cannot receive OTA updates, doing some reading finds I need to get rid of CWM and revert to stock recovery, so how do I do this?
Click to expand...
Click to collapse
As you say, the problem is you need the stock recovery for the build that you are on. What build is the backup you restored? If it is ITL41F, then you are in luck. Go to this thread and download any one of the two yakjudv updates to /sdcard. Use CWM to flash it, and you will be all set -- it will wipe CWM and replace it with the correct stock recovery for that build.
---------- Post added at 08:49 PM ---------- Previous post was at 08:48 PM ----------
And please change the title of this thread to "Return to stock yakjudv" as it is very confusing. Most people refer to stock as yakju or takju for GSM devices.
Syn3rgi3 said:
I understand all the benefits of yakju, however I want to revert to yakjudv if for any reason in the future I require warranty (the phone is under contract).
I do in fact have a 4.0.1 Nandroid backup from another user on Telstra, I went ahead and restored it through CWM and everything was fine, except I still cannot receive OTA updates, doing some reading finds I need to get rid of CWM and revert to stock recovery, so how do I do this?
Click to expand...
Click to collapse
Can you please post the back up on here please via drop box or something, I need the same thing so I can return for a warranty issue however everywhere I look I just find silly people trying to inform me that I should use Google builds and no Samsung/Telstra build. I know all this however my phone is now on life support and everything seems to be going wrong so I just want to return to out of the box and return it.
---------- Post added at 07:36 PM ---------- Previous post was at 07:31 PM ----------
I love it when people ignore the question in the OP and just decide to tell others to flash different firmware. This isnt helpful in any way when trying to return your device to Telstra in Australia as that's not what come with it so they will just give you your faulty POS back and laugh in your face because you are no longer covered by the warranty.
picton said:
Can you please post the back up on here please via drop box or something, I need the same thing so I can return for a warranty issue however everywhere I look I just find silly people trying to inform me that I should use Google builds and no Samsung/Telstra build. I know all this however my phone is now on life support and everything seems to be going wrong so I just want to return to out of the box and return it.
I love it when people ignore the question in the OP and just decide to tell others to flash different firmware. This isnt helpful in any way when trying to return your device to Telstra in Australia as that's not what come with it so they will just give you your faulty POS back and laugh in your face because you are no longer covered by the warranty.
Click to expand...
Click to collapse
Have you tried returning a device with yakju and have Telstra give you back your "faulty POS" back? Have you heard of others who have experienced that? On the contrary, I have heard of many people returning their non-yakju-bought device with yakju, and have had full warranty.
And if you would have searched before lipping off, you would have found this: http://forum.xda-developers.com/showpost.php?p=29898676&postcount=175
efrant said:
Have you tried returning a device with yakju and have Telstra give you back your "faulty POS" back? Have you heard of others who have experienced that? On the contrary, I have heard of many people returning their non-yakju-bought device with yakju, and have had full warranty.
And if you would have searched before lipping off, you would have found this: http://forum.xda-developers.com/showpost.php?p=29898676&postcount=175
Click to expand...
Click to collapse
I have tried that link bro and it wont flash in CWM. I just get a red triangle with a robot on it. A mate of mine tried to take his back due to a similar problem im having and he was told he had played with the device and wouldn't fix it under warranty and wanted to charge him something stupid to fix it. I'm not giving ya lip but I have been looking for the last 6 hours and in every thread about this subject everyone is saying the same thing.
picton said:
I have tried that link bro and it wont flash in CWM. I just get a red triangle with a robot on it. A mate of mine tried to take his back due to a similar problem im having and he was told he had played with the device and wouldn't fix it under warranty and wanted to charge him something stupid to fix it. I'm not giving ya lip but I have been looking for the last 6 hours and in every thread about this subject everyone is saying the same thing.
Click to expand...
Click to collapse
Ok, are you flashing it in CWM? The "red triangle with a robot" IS the stock recovery, it is not an error. What is the exact procedure you are using to flash it?
Hey all,
I have NEVER tried to unlock or root a phone before, but I have the desire to try it now.
I have the T-mobile SGH-T999 with the new Android Jellybean 4.1.1 (Build Number JRO0L.T999UVDLJA)
I want to try to root my phone, but I would like to keep as much of the the new update (Jellybean) as possible instead of reverting to ICS. What I'm wondering is, what should I do to root the phone, and what programs are preffered, etc. Also, I was wondering how to back up my current build in case I want to set it back to default in case of warranty issues that I had to return it.
I am sure others have asked... maybe this would be a good sticky, I don't know... but I am hoping someone will take the time to point me in the right direction.
I need to know
a.) What I need to backup pre-root
b.) What software is best to root
c.) Any special instructions for rooting that may be specific for this build or this phone
d.) How to un-root in case I need to return the phone.
Any help would be appreciated, and apologies in advance if this is a repeated question. I just figured I'd ask because of the new update.
Thanks!
Skot in Seattle
sekellas said:
Hey all,
I have NEVER tried to unlock or root a phone before, but I have the desire to try it now.
I have the T-mobile SGH-T999 with the new Android Jellybean 4.1.1 (Build Number JRO0L.T999UVDLJA)
I want to try to root my phone, but I would like to keep as much of the the new update (Jellybean) as possible instead of reverting to ICS. What I'm wondering is, what should I do to root the phone, and what programs are preffered, etc. Also, I was wondering how to back up my current build in case I want to set it back to default in case of warranty issues that I had to return it.
I am sure others have asked... maybe this would be a good sticky, I don't know... but I am hoping someone will take the time to point me in the right direction.
I need to know
a.) What I need to backup pre-root
b.) What software is best to root
c.) Any special instructions for rooting that may be specific for this build or this phone
d.) How to un-root in case I need to return the phone.
Any help would be appreciated, and apologies in advance if this is a repeated question. I just figured I'd ask because of the new update.
Thanks!
Skot in Seattle
Click to expand...
Click to collapse
I would think the easiest is to use the root injected rom from this forum: http://forum.xda-developers.com/showthread.php?t=1771687
It is what I did and I have full root access and stock rom with no counter tripped. Backup preroot will be difficult but as long as everything is set up with google, you should be able to get all of your contacts back but not settings. Once rooted, you can use titanium backup. Great program. If you want to unroot you can use the same method you used to root but you can just odin back to the original rom again. If you like my response please click on Thanks.
Thanks!
I took a look at the thread you sent me, and have contacted the original member to get step by steps, just to make sure I dont screw it up.
Hopefully it will work as desired.
Thanks for your help and response!
sekellas said:
I took a look at the thread you sent me, and have contacted the original member to get step by steps, just to make sure I dont screw it up.
Hopefully it will work as desired.
Thanks for your help and response!
Click to expand...
Click to collapse
The person who wrote the thread may or may not have time to give a more detailed run-through.
I used that thread to root my phone - honestly, all the instructions have already been given in it. I have never done anything like this and I just followed the instructions as given - the process is covered completely. I'm not sure what more they could tell you.
Not trying to be rude. Just understand that they have already provided a full guide and it might be more considerate to ask questions to the open forum about any step that is troubling you - that way anyone who has free time can answer.
Ok
Pennycake said:
The person who wrote the thread may or may not have time to give a more detailed run-through.
I used that thread to root my phone - honestly, all the instructions have already been given in it. I have never done anything like this and I just followed the instructions as given - the process is covered completely. I'm not sure what more they could tell you.
Not trying to be rude. Just understand that they have already provided a full guide and it might be more considerate to ask questions to the open forum about any step that is troubling you - that way anyone who has free time can answer.
Click to expand...
Click to collapse
Thanks for that, I guess I just wanted to make sure I wasn't leaving anything to chance. Since the phone is a pretty penny, I didn't want to be screwed if I tried to root and somehow screwed up the phone.
I'll see if he responds in the next few days, if not, I'll give it a go.
thanks again!
sekellas said:
Thanks for that, I guess I just wanted to make sure I wasn't leaving anything to chance. Since the phone is a pretty penny, I didn't want to be screwed if I tried to root and somehow screwed up the phone.
I'll see if he responds in the next few days, if not, I'll give it a go.
thanks again!
Click to expand...
Click to collapse
It's so easy, you'd be hard pressed to screw it up.
Step 1): Download the Samsung USB Drivers from their site
Step 2): Download the pre-rooted stock firmware from the previously listed link here at xda(make sure you get the 4.1 with root)
Step 3): Download ODIN
Step 4): Plug phone into PC and launch ODIN
Step 5): Click "PDA" and then browse to the firmware you downloaded
Step 6): Hit Flash.
Step 7): Wait, wait some more. Wait more.
Step 8): Watch phone reboot and sweat manically as its your first time and you think you've bricked your phone.
Step 9): Tinker like a madman when your phone comes back and you see its rooted.
Step 10 through ifiniti): Continue to tinker, eventually find rom manager and aftermarket roms. some good, some bad.
PM me if you want and I can walk you through it via IM or something. I can even throw you my rom, which is essentially stock with all the tmobile BS removed.
Awesome (Easy) walkthrough
osbosb said:
It's so easy, you'd be hard pressed to screw it up.
Step 1): Download the Samsung USB Drivers from their site
Step 2): Download the pre-rooted stock firmware from the previously listed link here at xda(make sure you get the 4.1 with root)
Step 3): Download ODIN
Step 4): Plug phone into PC and launch ODIN
Step 5): Click "PDA" and then browse to the firmware you downloaded
Step 6): Hit Flash.
Step 7): Wait, wait some more. Wait more.
Step 8): Watch phone reboot and sweat manically as its your first time and you think you've bricked your phone.
Step 9): Tinker like a madman when your phone comes back and you see its rooted.
Step 10 through ifiniti): Continue to tinker, eventually find rom manager and aftermarket roms. some good, some bad.
PM me if you want and I can walk you through it via IM or something. I can even throw you my rom, which is essentially stock with all the tmobile BS removed.
Click to expand...
Click to collapse
Hey osbob, thanks for that walkthrough... I wanted to make sure I was using the right pre-rooted stock firmware... would it be the
New! - October 2012 - 4.1.1 JellyBean
Note: This is based off of the stock image TMO T999UVDLJA
Perm Mirror: Download - root66_TMO_T999UVDLJA.7z
Click to expand...
Click to collapse
?
And then, if I need to send it back, I'd have to unroot the phone too, so I wanted to make sure I saved whatever I needed to. As for using yoru version without the bloatware, the bloatware doesn't bother me, since I use the Visual Voicemail, and the My Account features to manage the account for my wife and I. I just want to make sure I'm injecting the right stuff.
Thanks a lot for your help and the walkthrough above
Skot
sekellas said:
Hey osbob, thanks for that walkthrough... I wanted to make sure I was using the right pre-rooted stock firmware... would it be the ?
And then, if I need to send it back, I'd have to unroot the phone too, so I wanted to make sure I saved whatever I needed to. As for using yoru version without the bloatware, the bloatware doesn't bother me, since I use the Visual Voicemail, and the My Account features to manage the account for my wife and I. I just want to make sure I'm injecting the right stuff.
Thanks a lot for your help and the walkthrough above
Skot
Click to expand...
Click to collapse
You can use Odin to return it to stock.
Sent from my SGH-T999 using xda app-developers app
sekellas said:
Hey osbob, thanks for that walkthrough... I wanted to make sure I was using the right pre-rooted stock firmware... would it be the ?
And then, if I need to send it back, I'd have to unroot the phone too, so I wanted to make sure I saved whatever I needed to. As for using yoru version without the bloatware, the bloatware doesn't bother me, since I use the Visual Voicemail, and the My Account features to manage the account for my wife and I. I just want to make sure I'm injecting the right stuff.
Thanks a lot for your help and the walkthrough above
Skot
Click to expand...
Click to collapse
Perm Mirror: Download - root66_TMO_T999UVDLJA.7z <-- that's correct.
You can always run a debloated rom and then reinstall the tmobile specific stuff.