This is driving me nuts. This last week my phone started rebooting at the most random times. Sometimes in the middle of stuff and other times just sitting on the counter or on the charger. I was running a Classic Sense Rom, but wiped all and reinstalled several - all having the same problem. I am currently using the Derp 3d Rom v1.2 RC2, Kernal 2.6.35.10-g4e39384 (nitrous download) baseband ver 2.15.00.11.19
Does this tell anyone anything? It was rebooting without any additional apks reinstalled.
Thanks for any help or ideas..
I would suggest trying another kernel. The kernel may be undervolted and not playing nice, or the kernel just doesn't like your phone; it happens.
Just curious, which recovery are you using?
HipKat said:
Just curious, which recovery are you using?
Click to expand...
Click to collapse
Using clockwork recovery..
I'll try another Kernal. The kernal I just flashed was to try another one as the phone had been working perfectly fine and then just started acting up without any new Rom / Kernal etc... It does it with / without the SD card - seen people attributing this to SD.
Any suggestion on a kernal??
Stop using clockwork now
Follow the link below and after following the instructions you will a great aosp rom with a better recovery. If reboots continue its very easy to fix the undervolting.
If you prefer sense, you can still gram amonra recovery from the link below. Continue to reflash your from and kernel. If rebooting occurs download an undervolting app or get vipermod and you can raise the voltages until rebooting stops.
Having trouble with AOSP? http://forum.xda-developers.com/showthread.php?t=1295702
lawyeradam said:
Using clockwork recovery..
Click to expand...
Click to collapse
There's your problem, right there.
You should click on the link for the evo guide in my signature and scan through it one time. I go into recoveries in there
---------- Post added at 10:11 PM ---------- Previous post was at 10:10 PM ----------
Crossrocker said:
Stop using clockwork now
Follow the link below and after following the instructions you will a great aosp rom with a better recovery. If reboots continue its very easy to fix the undervolting.
If you prefer sense, you can still gram amonra recovery from the link below. Continue to reflash your from and kernel. If rebooting occurs download an undervolting app or get vipermod and you can raise the voltages until rebooting stops.
Having trouble with AOSP? http://forum.xda-developers.com/showthread.php?t=1295702
Click to expand...
Click to collapse
Dude, no offense, but isn't that a little outdated?
OK, first thanks for the help so far! I've wiped all and made the recommended updates. I now have RA recovery; gingerbread deck1.3; gapps; SavagedZen 2.2.1 kernel; and updated the radio / PRI 2.15.00.12.19... BUT....... It has still rebooted on its own.. Any help w/ undervolting / vipermod? Thanks!
lawyeradam said:
OK, first thanks for the help so far! I've wiped all and made the recommended updates. I now have RA recovery; gingerbread deck1.3; gapps; SavagedZen 2.2.1 kernel; and updated the radio / PRI 2.15.00.12.19... BUT....... It has still rebooted on its own.. Any help w/ undervolting / vipermod? Thanks!
Click to expand...
Click to collapse
Have you adjusted your cpu settings at all?
Truth is, you just may have a hardware issue at this point
HipKat said:
There's your problem, right there.
You should click on the link for the evo guide in my signature and scan through it one time. I go into recoveries in there
---------- Post added at 10:11 PM ---------- Previous post was at 10:10 PM ----------
Dude, no offense, but isn't that a little outdated?
Click to expand...
Click to collapse
Sure. The evo is old now. I really don't know what to update with because I have tried ALOT of stuff. And this is the best I've gotten.
Sent from my PC36100 using Tapatalk 2
lawyeradam said:
OK, first thanks for the help so far! I've wiped all and made the recommended updates. I now have RA recovery; gingerbread deck1.3; gapps; SavagedZen 2.2.1 kernel; and updated the radio / PRI 2.15.00.12.19... BUT....... It has still rebooted on its own.. Any help w/ undervolting / vipermod? Thanks!
Click to expand...
Click to collapse
Go into advanced settings and try lowering the Max speed. Keep mind at 245.
If not then there's voltage problems. Download incredicontrol and see if raising tthe voltages helps.
If not, take the battery out and keep it out for 24 hours.
Might work.
Edit. Can you explain your problem in further detail. Your phone boots up and then just starts rebooting? Reboots every few minutes? Or does it not even boot in to the rom?
Sent from my PC36100 using Tapatalk 2
I had the same exact problem that you are describing to everyone here. All I did was Nandroid'd my phone, cleared everything and re-installed the Rom, let it boot up, go into recovery and clear the caches, then I installed the Kernal of my choice and it took care of my random rebooting. Just like everyone, we all have different problems even though it sounds like they are the same most of the time they aren't.
---------- Post added at 03:28 PM ---------- Previous post was at 03:23 PM ----------
I had the same exact problem that you are describing to everyone here. All I did was Nandroid'd my phone, cleared everything and re-installed the Rom, let it boot up, go into recovery and clear the caches, then I installed the Kernal of my choice and it took care of my random rebooting. Just like everyone, we all have different problems even though it sounds like they are the same most of the time they aren't.
Related
I rooted my evo yesterday, so I am still completely new to how things work. (Though I have read the forums for a while)
I know I can flash a custom rom to fix the 28FPS limit I am getting, but I don't have time to completely wipe my phone and rebuild everything again.
It's kind of looking like I just flash a kernel? but I am not sure and I don't want to brick my phone.
Is there a way to just fix the performance limitations (i.e. FPS limit) and keep my stock 2.2 and all my settings/preferences?
Thank you.
I searched but didn't find anything that made sense.
Phone:
Evo w/ stock 2.2 (UnrEVOked3 root)
You should be able to just flash a custom kernel, but I don't know how those work on plain stock. Make sure you nand first.
Sent from my blah blah blah blah
I have rooted stock 2.2 with Kings kernel #9. Works flawlessly. It's hard for me to go back to regular once the FPS is unlock.
http://forum.xda-developers.com/showthread.php?t=754128
Just flash the zip file from recovery. Make sure you do a nand backup before you start flashing the kernel.
Thanks for the info.
I will give it a try later.
Can I flash any kernel? Or how does that work?
I was looking at snap 8.2. Is it compatible with stock & sense?
(http://forum.xda-developers.com/showthread.php?t=733099)
Also, once a kernel is flashed can you update it without problems or doing a full nandroid restore?
Thanks again,
Sent from my Evo using XDA App.
xNotta said:
Thanks for the info.
I will give it a try later.
Can I flash any kernel? Or how does that work?
I was looking at snap 8.2. Is it compatible with stock & sense?
(http://forum.xda-developers.com/showthread.php?t=733099)
Also, once a kernel is flashed can you update it without problems or doing a full nandroid restore?
Thanks again,
Sent from my Evo using XDA App.
Click to expand...
Click to collapse
No. Go for Netarchy's or Kingklick's kernels for 2.2 Sense roms. Snap is only for cm6/AOSP style roms.
daneurysm said:
No. Go for Netarchy's or Kingklick's kernels for 2.2 Sense roms. Snap is only for cm6/AOSP style roms.
Click to expand...
Click to collapse
Netarchy, Kingklick, or Hero_over's kernel
jerryparid said:
Netarchy, Kingklick, or Hero_over's kernel
Click to expand...
Click to collapse
+1.
I'm using hero 4 on stock odex with no issues and great battery life.
Thank you.
I will read into each kernel.
Any suggestions on which is best/worst?
EDIT: Thought I would post some links to each kernel you listed:
KiNgxKernel
netarchy-toastmod
I couldn't find the link for Hero_over's kernel. The forums search function is down for some reason.
Please correct me if those aren't the correct or official links to the kernels.
with netarchy it says:
An important note for Clockwork mod Recovery users:
Clockwork Mod is reportedly not wiping correctly (ie; if you try to wipe cache/dalvik-cache/data/etc it's not actually doing it, or not doing it right)
You may want to consider using Amon Ra Recovery instead.
Click to expand...
Click to collapse
I am using clockwork, so I think that eliminates netarchy from my choices.
Sent from my Evo using XDA App.
xNotta said:
Thank you.
I will read into each kernel.
Any suggestions on which is best/worst?
EDIT: Thought I would post some links to each kernel you listed:
KiNgxKernel
netarchy-toastmod
I couldn't find the link for Hero_over's kernel. The forums search function is down for some reason.
Please correct me if those aren't the correct or official links to the kernels.
with netarchy it says:
I am using clockwork, so I think that eliminates netarchy from my choices.
Sent from my Evo using XDA App.
Click to expand...
Click to collapse
not wiping correctly may cause your phone to bootloop no matter the kernel(Fresh's seems to be particularly sensitive to it), you should be ok though. If it happens just keep redoing it till it works.
I'm using netarchy's 4.1.9 cfs ATM and it's working great. Smooth as butter.
king kernel is really good, thats what im on right now. medium use: 500+ texts, wifi on, data on, hour of browsing, 30 mins of music playing, live wallpaper. with all that im hitting ~13 hours and im at 8% right now. king kernel is pretty good, nice and smooth too
ms79723 said:
king kernel is really good, thats what im on right now. medium use: 500+ texts, wifi on, data on, hour of browsing, 30 mins of music playing, live wallpaper. with all that im hitting ~13 hours and im at 8% right now. king kernel is pretty good, nice and smooth too
Click to expand...
Click to collapse
Wow! that is double my current battery time with stock and everything turned off to conserve power.
Should I use BFS or CFS?
Can I back it up my kernel so I can reflash it if I ever need to?
(there is a link to stock kernel on netarchy's xda post)
I added a poll. Please vote for your favorite.
xNotta said:
Wow! that is double my current battery time with stock and everything turned off to conserve power.
Should I use BFS or CFS?
Can I back it up my kernel so I can reflash it if I ever need to?
(there is a link to stock kernel on netarchy's xda post)
I added a poll. Please vote for your favorite.
Click to expand...
Click to collapse
im on the latest king kernel which is BFS (the king kernel #9)
as for backing up your kernel...i dont know...(didnt know that was possible). once you unlock fps, you'll never want to go back.
edit: also forgot to add that my screen off is underclocked to max:245 and min:245. so that made a HUGE difference in battery life
xNotta said:
Wow! that is double my current battery time with stock and everything turned off to conserve power.
Should I use BFS or CFS?
Can I back it up my kernel so I can reflash it if I ever need to?
(there is a link to stock kernel on netarchy's xda post)
I added a poll. Please vote for your favorite.
Click to expand...
Click to collapse
There really is no generalization for which is better, BFS or CFS. Every phone is slightly different in build due to margin of error in production. Some people have great results with BFS where others do not. I tried both extensively on Netarchy and much prefer CFS (better performance and battery). Why? I don't know. It just works for me. You will probably have to do some experimenting of your own.
Edit: Also concerning recoveries, I would go ahead and flash Amon_RA's recovery over ClockworkMod just to avoid conflicts. Amon works with everything is very straightforward to use.
Sent from my PC36100 using XDA App
sombdy said:
Edit: Also concerning recoveries, I would go ahead and flash Amon_RA's recovery over ClockworkMod just to avoid conflicts. Amon works with everything is very straightforward to use.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Rom Manager won't work with Amon_RA, will it?
I still know very little about root abilities so I would like so stay with something easy like rom manager.
And are Nandroid back ups interchangeable between recovery images?
Sent from my Evo using XDA App.
xNotta said:
Rom Manager won't work with Amon_RA, will it?
I still know very little about root abilities so I would like so stay with something easy like rom manager.
And are Nandroid back ups interchangeable between recovery images?
Sent from my Evo using XDA App.
Click to expand...
Click to collapse
you can use rom manager to install ra, but then all you'll be able to use rom manager for is to download roms. Which is still ok - some folks prefer it this way, because some things shouldnt be too easy, if you know what I mean. If you let a tool do all the work, what do you do when that tool breaks or is unavailable, and you have to do it manually?
ra can only be used outside of rom manager. Nands cannot be used between ra and clockwork - if you backup with ra, you need to restore with ra, and if you backup with clockwork, you need to restore with clockwork.
fachadick said:
you can use rom manager to install ra, but then all you'll be able to use rom manager for is to download roms. Which is still ok - some folks prefer it this way, because some things shouldnt be too easy, if you know what I mean. If you let a tool do all the work, what do you do when that tool breaks or is unavailable, and you have to do it manually?
Click to expand...
Click to collapse
I know exactly where you are coming from.
This is only my first few days with root, so I want to make sure my first few backups are done correctly.
So, RA is a beter recovery?
Sent from my Evo using XDA App.
xNotta said:
I know exactly where you are coming from.
This is only my first few days with root, so I want to make sure my first few backups are done correctly.
So, RA is a beter recovery?
Sent from my Evo using XDA App.
Click to expand...
Click to collapse
I don't mean to be ambiguous, but it really depends who you talk to. Some people swear by RA, and insist that clockwork doesn't wipe properly. Other people can conclusively prove that clockwork does indeed wipe properly, and use that with no issues. Personally, I use clockwork, but do all my flashing and wiping manually and not through rom manager. The only time I ever had any issues was a while ago, with an older version of clockwork.
I also think that clockwork has the benifit of not requiring signed zips, but don't quote me on that.
edit - just wanted to add that some devs will specify one or the other to be specifically used for whatever it is that you'll be flashing. So if they say to use X to flash, you better try using X to flash before asking why you're having issues
idk im new to trying kernals, but im running fresh 2.2 and im only getting 31-33 fps.
using kinklicks bfs 9 kernal
any help?
I have tried most of the kernels listed. For me, the best has been Netarchy's 4.1.9.1 cfs. It is smooth and has not had a single glitch, which I can't say for the others I have tried. The second best I tried was the Baked snack battery kernel #5.
cfs or bfs? What I found was that bfs gave slightly better benchmark scores than cfs, but I had a lot of odd problems or glitches when running bfs kernels (mainly scrolling lag in some apps, and some apps fcing randomly). haven't had any problems with the cfs kernels. Frankly, I haven't found any advantage to bfs because, while it seems to give better benchmark scores, in actual use it seems much slower and more laggy to me than cfs.
Clockwork or AmonRa recovery? I have used both, only had a problem once (boot loop), and that was with clockwork. Since then, I have always used Amonra's recovery to flash with. When flashing just a kernel just wipe cache and Dalvik cache, then flash the kernel. As long as you do not wipe data (reset) you should not lose anything when you flash the kernel.
Oh, and when you do a nand backup, it backs up the kernel you are currently using with it. So you can easily switch back and forth to test by restoring your backups.
fachadick said:
I also think that clockwork has the benifit of not requiring signed zips, but don't quote me on that.
Click to expand...
Click to collapse
As of version 1.8.0.0, Amon_RA's recovery no longer requires signed .zip's.
Sent from my PC36100 using XDA App
Not sure if its the fact i am running CM 7 or what but whenever i try a different kernel then there stock everything boots just fine but the touch screen doesn't work. I am lost and have no clue what to try.
What kernel are you trying to flash?
Sent from my ADR6300 using XDA Premium App
If running cm7, ya gotta flash a gingerbread AOSP kernel - try that.
Sent from my ADR6300 using XDA Premium App
I believe it was the AOSP kernel part that i was missing. I finally got a Invisiblek to install. Thanks for the help.
bjohnson8949 said:
I believe it was the AOSP kernel part that i was missing. I finally got a Invisiblek to install. Thanks for the help.
Click to expand...
Click to collapse
Invisiblek is the way to goon Gingerbread roms. I've flashed his newest with OMFGB 1.1.1, and it is awesome. No problems snappy, excellent battery too!
Sometimes people (including me) mix up AOSP and Sense, sadly they don't like to play with others if you install them with the wrong rom. Racists, pft.
I have only had the phone about a week now so I have had a lot to learn. So far everything seems good now and I am happy. Now if i could just get better battery life lol.
I was trying to install the following http://forum.xda-developers.com/showthread.php?t=972746 I am getting same issue installs fine boots. Then when I try to unlock screen I get nothing. I have HtC incredible running cm 7 rc 3
clockworkmod 3.0.0.8
radio 2.15.00.11.19
If you need anymore information let me know.
I am doing the following for install.
reboot to recovery
clear cache
clear dalvik cache
install zip from sd card
Thanks for all the help already
bjohnson8949 said:
I was trying to install the following http://forum.xda-developers.com/showthread.php?t=972746 I am getting same issue installs fine boots. Then when I try to unlock screen I get nothing. I have HtC incredible running cm 7 rc 3
clockworkmod 3.0.0.8
radio 2.15.00.11.19
If you need anymore information let me know.
I am doing the following for install.
reboot to recovery
clear cache
clear dalvik cache
install zip from sd card
Thanks for all the help already
Click to expand...
Click to collapse
It worked fine for me...and still working
Maybe download it again and then try it. Just as a question are you by chance trying to flash a froyo kernel and not realizing it? Its gotta say gb or gingerbread
Sent from my ADR6300 using XDA App
I was trying to flash Tiamat Version 3.3.3-sbc -- Current Gingerbread with SBC from the link I posted.
bjohnson8949 said:
I was trying to install the following http://forum.xda-developers.com/showthread.php?t=972746
Click to expand...
Click to collapse
bjohnson8949 said:
I was trying to flash Tiamat Version 3.3.3-sbc -- Current Gingerbread with SBC from the link I posted.
Click to expand...
Click to collapse
The link you provided is the EVO kernel. Have you tried the Inc kernel?
Evo: http://www.thebcblends.com/cayniarb/Kernels/evo/Tiamat_Evo-v3.3.3-sbc.zip
Inc: http://www.thebcblends.com/cayniarb/Kernels/inc/Tiamat_Inc-v3.3.3-sbc.zip
The zip files have different contents.
EDIT - I just realized the thread you linked has both the Inc and the Evo versions. I saw that it was in the Evo subforum and jumped to the wrong conclusion. In any regard, make sure you are flashing the right one.
I just flashed
Inc: http://www.thebcblends.com/cayniarb/Kernels/inc/Tiamat_Inc-v3.3.3-sbc.zip
and i am still having same problem. Any ideas ?
Edit: Messing around with rooted phones is something I have just started so it maybe something simple I am missing.
Not sure why my cell doesn't seem to like other kernels but
http://forum.xda-developers.com/showthread.php?t=905873
seems to be doing just fine so i will leave it alone.
Thanks for all the help.
Have you tried Incredikernel? Kernels are really a matter of personal preference, but Incredikernel seems to be one of the best. (And also my favorite.)
I gave it a shot a while back and had trouble. My issue is that he touch screen doesn't respond. Incredikernel is recommended in several places but i had zero luck with it supporting the screen. I have started to wonder if its support for slcd.
I will try it again and see what happens.
I've been trying to get boot manager up and running,but for some reason when I go to setup phone rom it keeps looping boot manager has been given superuser permissions. I've tried deleting the folder from the SD card, uninstalling the program,resetting the permissions in su, but no luck. Can someone help me out
If I remember correctly only a few ROMs will boot on BM. You could talk directly to them here
Its not a rom program, but the actual app itself
Have 4 ROMs running on BM here. Havent got ICS a5 running yet or it would be 5. May be of some help but direct link to their forums that fenixjn posted might be a better place as the devs GFlam and Conap check their forums numerous times a day and are fantastic.
Which ROM are you trying to boot? I have four running but have had some issues with some of the newer ones.
I think that you need to talk directly to the Devs.
And as stated, some Roms do not let boot manager open.
Sent from my PC36100 using Tapatalk
I got ics alpha to run in a slot with BM, but once in ics I couldn't use BM.
I'm not even at the step of getting a rom ready to setup,I press the setup phone rom button and it starts a continuous loop of granting superuser permissions,and it doesn't stop until I either restart the phone or force close it
I bought it and never got it to work. I am happy to support devs and it is an awesome Idea but, I couldnt find a single rom that would boot from it. MIUI, OMGB, CM none worked
I got the problem fixed,it was something wrong with my backup,a clean install fixed it
Swyzzlestickz said:
I bought it and never got it to work. I am happy to support devs and it is an awesome Idea but, I couldnt find a single rom that would boot from it. MIUI, OMGB, CM none worked
Click to expand...
Click to collapse
I had the same problem before,make sure the rom your using has the same kernel as the phone rom, or download a kernel for sense
Sent from my PC36100 using xda premium
xcpefrmreality said:
I got ics alpha to run in a slot with BM, but once in ics I couldn't use BM.
Click to expand...
Click to collapse
Once you are in the ICS, then let it settle, then reboot it. Check to make sure you have an internet connection of anykind so it can check permissions, then try to reload it. Also, NEVER delete the Bootmanager directory while in a Slot ROM. Can you say problem? It is, that is the only way you can get back to the stock Boot.img.
---------- Post added at 09:46 PM ---------- Previous post was at 09:36 PM ----------
Swyzzlestickz said:
I bought it and never got it to work. I am happy to support devs and it is an awesome Idea but, I couldnt find a single rom that would boot from it. MIUI, OMGB, CM none worked
Click to expand...
Click to collapse
I also had the same problem, after I had it installed and running flawlessly.
A solution is to do a clean wipe of your phone, and reflash the ROM you want as your primary. SD cards can corrupt data just like anything else, so sometimes a file gets screwed. So I wiped, reflashed primary, then restored the apps, then set up boot manager, and installed 4 ROMs without any problems.
I've looked through the CM10 thread and can't find anyone with this issue. None of my pictures and photos will load in the gallery. My music won't load either. Is there a fix for this? Doesn't seem to be noted as a bug. I did a full wipe and installed the files from the OP.
I had the issue at first, but now that CM10 camera is functional all my pics show up in the gallery.
Sent from my Incredible 2 using xda premium
jtsrtr13 said:
I had the issue at first, but now that CM10 camera is functional all my pics show up in the gallery.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
I installed the new version but no dice. I'm now formatting the entire SD Card and re-flashing and using ClockworkMod recovery.
All medial refuses to load.
porkbarrel said:
All medial refuses to load.
Click to expand...
Click to collapse
I haven't seen this on any versions I have tried to load, although at this point on Aeroevan's 7/23 my Picasa pictures aren't showing up in my gallery. I haven't heard of your issue though, did you start with a full wipe? Did you flash Aeroevan's kernel?
gtdtm said:
I haven't seen this on any versions I have tried to load, although at this point on Aeroevan's 7/23 my Picasa pictures aren't showing up in my gallery. I haven't heard of your issue though, did you start with a full wipe? Did you flash Aeroevan's kernel?
Click to expand...
Click to collapse
I did full wife, and I even formatted my SD card. I installed it with and without Aerovan's Kernel and still can't get any media to load. I never encountered this problem before with any rom before.
porkbarrel said:
I did full wife, and I even formatted my SD card. I installed it with and without Aerovan's Kernel and still can't get any media to load. I never encountered this problem before with any rom before.
Click to expand...
Click to collapse
I don't know if this will help, but I recall hearing this get kicked around in the other thread...
In terminal:
su
killall mediaserver
I don't have any idea if it will work or if it's related, but it won't hurt anything...
---------- Post added at 03:41 PM ---------- Previous post was at 03:39 PM ----------
gtdtm said:
I don't know if this will help, but I recall hearing this get kicked around in the other thread...
In terminal:
su
killall mediaserver
I don't have any idea if it will work or if it's related, but it won't hurt anything...
Click to expand...
Click to collapse
Also meant to mention... maybe try Aero's 7/23 rom? I know it seems weird, but some roms seem to work differently for some people even though it doesn't make sense that we would have a different experience on the same hardware...
gtdtm said:
I don't know if this will help, but I recall hearing this get kicked around in the other thread...
In terminal:
su
killall mediaserver
I don't have any idea if it will work or if it's related, but it won't hurt anything...
---------- Post added at 03:41 PM ---------- Previous post was at 03:39 PM ----------
Also meant to mention... maybe try Aero's 7/23 rom? I know it seems weird, but some roms seem to work differently for some people even though it doesn't make sense that we would have a different experience on the same hardware...
Click to expand...
Click to collapse
I give up for now. JB is so similar to ICS that it doesn't really matter anyway. Thanks for the help.
porkbarrel said:
I give up for now. JB is so similar to ICS that it doesn't really matter anyway. Thanks for the help.
Click to expand...
Click to collapse
You could also try Kev's rom (http://forum.xda-developers.com/showthread.php?t=1779986&highlight=backlight) after a full wipe. Be sure to flash Aero's kernel and gapps (in that order). I have no problems with media (except video of course) ...
porkbarrel said:
I give up for now. JB is so similar to ICS that it doesn't really matter anyway. Thanks for the help.
Click to expand...
Click to collapse
CM10 is still in development and has not had a official/unofficial release from what I have heard. It's just another beta to play around with. So, I would highly recommend you report that bug to the developer.
DCIM is usually where all the photo's would be and stored in a folder called 100MEDIA/MEDIA100. It confuses CM what folder to look in, and CM just makes its own folder.
pneveu said:
You could also try Kev's rom (http://forum.xda-developers.com/showthread.php?t=1779986&highlight=backlight) after a full wipe. Be sure to flash Aero's kernel and gapps (in that order). I have no problems with media (except video of course) ...
Click to expand...
Click to collapse
I've tried all of them. They all do the same thing. I would think that I know what I'm doing by now since I've been flashing roms since the Eris days.
Try sdrescan from the play store
I had the same issue. Try a restart and let it sit for a few minutes with gallery open.
Sent from my AT100 using xda app-developers app
I am kind of a newbie but wanting to flash this rom. Do I need to start with Alpha 1 and then flash each one after or can I just flash Alpha 5.3?
brandyanderson5581 said:
I am kind of a newbie but wanting to flash this rom. Do I need to start with Alpha 1 and then flash each one after or can I just flash Alpha 5.3?
Click to expand...
Click to collapse
Do exactly what the Dev told you in his post. Install a Safe kernal. DL your file put it on your device. make a backup. do a full wipe(usually calikulin's wipe all is perfect) now flash new rom. flash different kernal(unless it tells you not to) if you desire and then flash your modem if its not there. If you have no idea what you are doing. READ READ READ. Ive done a decent amount of flashing over the past 2 years and i still read tons of posts to include the first couple pages and the last couple pages.
That rom will also have bugs and isn't complete since he is still working on porting everything over from JB.
No you don't. The only think you have to worry about is being on a safe recovery. Agats kernel has a safe recovery included. The kuban kernel also includes a safe recovery as well. (included to prevent confusion) The reason why you need a safe recovery is because in the past people have bricked their phones when wiping data. You could also use the el26/29 kernel packed with clockworkmod recovery v5 to be extra safe. Once you enter recovery mode with a safe recovery or cwm5 all you have to do is wipe data, cache, and dalvik cache and you should be fine to flash cm10. You don't have to flash older versions because the newer ones have everything the older ones have. They also have bug fixes. There is no reason to flash alpha 1, 2, ect unless you just want to see how it works.
Just flash the latest version.
Sent from my SPH-D710 using xda app-developers app
I am having issues w/ my 3G. it shows up but I keep getting the message that I am no
Vash403 said:
No you don't. The only think you have to worry about is being on a safe recovery. Agats kernel has a safe recovery included. The kuban kernel also includes a safe recovery as well. (included to prevent confusion) The reason why you need a safe recovery is because in the past people have bricked their phones when wiping data. You could also use the el26/29 kernel packed with clockworkmod recovery v5 to be extra safe. Once you enter recovery mode with a safe recovery or cwm5 all you have to do is wipe data, cache, and dalvik cache and you should be fine to flash cm10. You don't have to flash older versions because the newer ones have everything the older ones have. They also have bug fixes. There is no reason to flash alpha 1, 2, ect unless you just want to see how it works.
Just flash the latest version.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I am having issues w/ my 3G. it shows up but I keep getting the message that I am not connected when I go to the internet and play store.. is that one of the bugs if not is what modem would be the best with this rom.
brandyanderson5581 said:
I am kind of a newbie but wanting to flash this rom. Do I need to start with Alpha 1 and then flash each one after or can I just flash Alpha 5.3?
Click to expand...
Click to collapse
You don't need to start with Alpha 1, just follow the directions on the original post (first post on the first page) after downloading the alpha 5.3 file, gapps, and any other files it recommends.
emottau said:
You don't need to start with Alpha 1, just follow the directions on the original post (first post on the first page) after downloading the alpha 5.3 file, gapps, and any other files it recommends.
Click to expand...
Click to collapse
my 3g isn't working... i only get 1x. what do i need to do to fix this.
What version did you flash? If it was a nightly I wouldn't be too worried about it cause sometimes they work and sometimes they have bugs because they sometimes contain experimental code. Also try toggling airplane mode and see if that helps.
Sent from my SPH-D710 using xda app-developers app
Vash403 said:
What version did you flash? If it was a nightly I wouldn't be too worried about it cause sometimes they work and sometimes they have bugs because they sometimes contain experimental code. Also try toggling airplane mode and see if that helps.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I flashed the Alpha 5.3. I tried the airplane toggle, I tried reflashing, I wiped everything and nothing worked. I still only get 1X. I flashed back to my previous rom for now until I figure it out.. which sucks because I love this rom.
brandyanderson5581 said:
I flashed the Alpha 5.3. I tried the airplane toggle, I tried reflashing, I wiped everything and nothing worked. I still only get 1X. I flashed back to my previous rom for now until I figure it out.. which sucks because I love this rom.
Click to expand...
Click to collapse
What Modem are you using?
---------- Post added at 01:52 PM ---------- Previous post was at 01:15 PM ----------
brandyanderson5581 said:
I flashed the Alpha 5.3. I tried the airplane toggle, I tried reflashing, I wiped everything and nothing worked. I still only get 1X. I flashed back to my previous rom for now until I figure it out.. which sucks because I love this rom.
Click to expand...
Click to collapse
Also when you say you wiped everything, that means that you wiped data/factory reset, wipe cache x2, wipe dalvik x2, then flash rom?
JengoFett said:
What Modem are you using?
---------- Post added at 01:52 PM ---------- Previous post was at 01:15 PM ----------
Also when you say you wiped everything, that means that you wiped data/factory reset, wipe cache x2, wipe dalvik x2, then flash rom?
Click to expand...
Click to collapse
Yes.. I did that! I have tried it 3 times now and I still only get 1X My phone has been flashed to Boost Mobile. Would that make a difference? I have flashed other roms before and never had a problem getting 3G
brandyanderson5581 said:
Yes.. I did that! I have tried it 3 times now and I still only get 1X My phone has been flashed to Boost Mobile. Would that make a difference? I have flashed other roms before and never had a problem getting 3G
Click to expand...
Click to collapse
update prl and profile via a temp rom.
calisro said:
update prl and profile via a temp rom.
Click to expand...
Click to collapse
what temp rom would you suggest?
brandyanderson5581 said:
what temp rom would you suggest?
Click to expand...
Click to collapse
http://e4gtcm.blogspot.com/2012/05/temporary-stock-e4gt-from-emmc.html
won't affect your current rom....
calisro said:
http://e4gtcm.blogspot.com/2012/05/temporary-stock-e4gt-from-emmc.html
won't affect your current rom....
Click to expand...
Click to collapse
Can i do this from the CM10 or do i need to go to CM9
brandyanderson5581 said:
Can i do this from the CM10 or do i need to go to CM9
Click to expand...
Click to collapse
either