Related
- I think I found a fix and it was quite easy to be honest. All I did was reinstall HTC SYNC and my computer is recognizing my phone now. Only thing is, i'm pretty sure if you want to use adb you had to uninstall this.
- Another solution is to update the RADIO on your phone to the newest version. (CREDIT GOES TO HAZAKINS FOR FINDING THIS)
I successfully rooted 2.2 today with the new guide. The first rom I flashed was RevE and noticed that when I plugged in my usb, to my computer, the notification bar would show up with the option of mounting or charging and then disappear after a second. Not only that, the phone didn't charge at all while connected and the notification bar was clear and didn't tell me whether I was charging only, ect even though it usually does.
The only way I am able to access my SD card is strictly through recovery now by mounting the usb. Other than that, there is no other way for me to access my SD card. Let me be clear that YES I have tried more than one USB port and usb cable but still there has been no luck. Let me also add that it was working fine before rooting.
Also, I just flashed to CM R2 successfully and the same issue still exists. I'm not really sure what else to do.
One interesting thing, if this means anything, that I found, was that I saw the My HTC drivers in device manager only when I accessed my SD card through recovery, it never appeared when I tried to connect my phone to my computer outside of recovery.
So, I'm not really sure what else to do. I have rebooted both my phone and my computer and I am really leaning towards the fact that it may have to do with the My HTC drivers. The thing is though, add or remove programs doesn't show My HTC when my phone is connected to the homescreen. But, I did manage to uninstall it while in recovery mode and as soon as I went back to the homescreen the driver installed so fast that I couldn't stop it from installing.
So, I have no idea what to do
I just confirmed that I am not the only one with this issue in IRC. We both narrowed it down to the driver being the issue. I'm not sure how exactly I can delete it though because it only shows up for an instant and then disappears. It isn't even in add or remove programs.
When you connect your phone, try toggling the USB Debugging off and then back on. I had similar problem (not exactly the same) and this is what worked for me.
Sent from my PC36100 using XDA App
I actually had this exact same problem... all the way up until I tried a different usb port... so I guess I got lucky.
But the one port was working fine up until I put the new ROM on it. Then it stopped working. Then I had to use a different port. I was able to do that... But now after phone reboot and PC reboot, 1st usb port works fine.
I hope it starts working for you.
I did same thing having same problem, I even downloaded another rom with rom manager and installed it, still same problem. When I plug in my USB cord it will pop up for a second on the phone to ask my charge or drive the goes away before i can do anything.
mikebeam said:
I did same thing having same problem, I even downloaded another rom with rom manager and installed it, still same problem. When I plug in my USB cord it will pop up for a second on the phone to ask my charge or drive the goes away before i can do anything.
Click to expand...
Click to collapse
basically sums up my issue.
OK Here is the fix, buy a mini sdcard reader copy the pc36img file to your sdcard using this reader, install back in phone boot into recovery and let it update, then startover root process, this worked for me, I haven't update to 2.2 yet, but I got usb back
sombdy said:
When you connect your phone, try toggling the USB Debugging off and then back on. I had similar problem (not exactly the same) and this is what worked for me.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Posting again.
Did you try this? Simple fix.
Sent from my PC36100 using XDA App
My fix was to get rid of the extension USB cable extender I was using. Apparently the signal degrades too much across it. I tried 3 different extender cables too.
sombdy said:
Posting again.
Did you try this? Simple fix.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I tried that, it was a no go.
I had the same issue. Using Unrevoked states to uninstall the HTC sync drivers. Just reinstall them and it should charge your phone. That worked for me...
weidnerj said:
I had the same issue. Using Unrevoked states to uninstall the HTC sync drivers. Just reinstall them and it should charge your phone. That worked for me...
Click to expand...
Click to collapse
I did that, twice, and the same issue is occurring.
Also having the same problem after the 2.2 down grade.
Same problem
I can't mount my SDcard either. I followed the new video tutorial to get root on phones that came with 2.2. I think something went wrong when i got that out of memory write error. I have tried two different computers and all their usb spots. I have not been able to mount sd card yet. It does charge however. Any ideas as what to do?? Oddly enough i was able to get Amon-ra recovery flashed so doesn't that mean i have full root??
Seems like a good amount of people are having this issue. If someone comes across a fix please share!!!
Try uninstalling My HTC and HTC Installer Drivers (I forgot the exact name) and then reinstalling HTC SYNC.
Got mine to work
on some other forum someone tried flashing the radios to the newest version and fixed the problem. I tried this as well and came back here to let you guys know that it worked for me also.
here is a link to the radio files.
link::::forum.xda-developers.com/showthread.php?t=715485
Easy fix: Uninstall the HTC software, then reinstall it.
This should reinstall the driver for your EVO.
the HTC software uninstall and reinstall didnt work for me. Wish it would have.
hazakins said:
the HTC software uninstall and reinstall didnt work for me. Wish it would have.
Click to expand...
Click to collapse
Mine was working until I booted into recovery. Drivers got installed automatically and now I can't connect my phone to my PC again : /
Hello,
i've got a problem like the title says. Everytime i connect my phone to the computer via usb, i get the message the device wasnt recognized by the computer. i tried everything i know, another usbport. etc. i want to install a new radio, but without connecting to the computer it isnt possible, because i dont have the usb debugging active.
i hope someone has an idea what i can do. i have rcmix 6.1.0.1 installed.
Are you using Windoze?
If you are unfortunate enough to be doing so then you might need to reinstall HTC Sync program (sometimes it works better if you completely uninstall it first including manually removing any left over folders and files in the application data folder.
thanks for the quick answer.
i tried it, but it didnt help. where is this application data folder? do you mean on the computer? i found after uninstalling no more folders from htc.
and yes i use windows home premium 64bit.
got another idea? now it says also the device does not function properly. i hope that nothing on the device is broken.
schorschl said:
thanks for the quick answer.
i tried it, but it didnt help. where is this application data folder? do you mean on the computer? i found after uninstalling no more folders from htc.
and yes i use windows home premium 64bit.
got another idea? now it says also the device does not function properly. i hope that nothing on the device is broken.
Click to expand...
Click to collapse
yes he is talking about your computer... if in the "program files" you hasn´t anythink about HTC SYNC,, ALL IS OK...
but enssure that in the configuration panel-system-dispositive administrator you hasn´t any drive installed for your android device... if you have installed it, erase or uninstall it before re-install htc sync or the htc drivers....then you can re-install and reboot windoux...
and hey buddy!I recommend to you to consider to pass to linux, you will not have this type of mistakes... LOL
UBUNTU is great!
I'm afraid I don't know much about Windoze but memory serving appication data is a hidden folder so you will need to change it to view them and is in the Documents and Settings / [Your username] directory.
Device not function is just a default Windoze error when it can't install something, ignore it, your phone is fine.
If you have reinstalled HTC Sync, try a USB port on the opposite side of the PC. So if you trying ones next to each other on the front, try ones on the back (they use different headers on the motherboard).
If that doesn't work then I'm afraid I probably won't be of much more use, sorry.
SERGI.3210 said:
and hey buddy!I recommend to you to consider to pass to linux, you will not have this type of mistakes... LOL
UBUNTU is great!
Click to expand...
Click to collapse
Best advice ever. Ubuntu user here too (thus for me everything just works ).
Mr_JMM said:
Best advice ever. Ubuntu user here too (thus for me everything just works ).
Click to expand...
Click to collapse
The use of linux is good to understand better android OS you don´t believe?
you said it.... EVERYTHING WORKS
thanks guys for your help, but although i followed your advices, except the one to switch to linux ;-), it hasnt got better yet. the problem is still exsisting and i dont know what else i can do.
anyone got an idea how to install radio without having usb debugging and the drivers from the computer?
Hi!
I've got the same problem with 2 different PCs, one with Win7 64-bit, the other with Win XP PRO.
Other devices work fine with the same USB ports, so i doubt it's windows or the PC...
schorschl said:
thanks guys for your help, but although i followed your advices, except the one to switch to linux ;-), it hasnt got better yet. the problem is still exsisting and i dont know what else i can do.
anyone got an idea how to install radio without having usb debugging and the drivers from the computer?
Click to expand...
Click to collapse
you can´t flash any radio if your phone is not recognized
well.. Let's continue with the problem in question...
1.At some time could you have connected it?with the stock rom maybe?
2.have you tried to swich on mass storage usb mode?what´s the result?
3.when you tries to swich the phone for flash some radio you enables "usb debug"
and "only chargue"?
its a weird problem
Hey man, I've had the same problem with my old Desire (normal). Which was actually broken.. Went back to the store twice and it was sent to htc twice. But that one wasn't rooted tho. But in the end, the sensors were broken & something inside the phone that didn't recon the pc. But also try a full wipe, which helped temporarily for me.
1. yes i functioned, not only with stock rom, but also with the next few custom roms. but then 2 weeks ago the problem occured and i dont know why. before i used custom roms for months.
2. it also doesnt recognize the mass storage anymore, i dont see the memorycard as a storage device in explorer.
3. yes i turned usb debugging on and connected charging only, i flashed radios before. but the problem with the actual is, that my signalstrength is weak and so i wanted to flash the recommended for this rom, and so i recognized there is something wrong, cause my problem here occured.
normally i sync with myphoneexplorer so i didnt realize that mass storage didnt function anymore.
and because earlier i got no problems, i think more and more, that something on the phone went wrong.
maybe it helps if i go back to stockrom and undo all changes i made, to start all over again?
again thanks mate for your effort to help me out
maikel16 said:
Hey man, I've had the same problem with my old Desire (normal). Which was actually broken.. Went back to the store twice and it was sent to htc twice. But that one wasn't rooted tho. But in the end, the sensors were broken & something inside the phone that didn't recon the pc. But also try a full wipe, which helped temporarily for me.
Click to expand...
Click to collapse
maybe this is his problem...
schorschl said:
1. yes i functioned, not only with stock rom, but also with the next few custom roms. but then 2 weeks ago the problem occured and i dont know why. before i used custom roms for months.
2. it also doesnt recognize the mass storage anymore, i dont see the memorycard as a storage device in explorer.
3. yes i turned usb debugging on and connected charging only, i flashed radios before. but the problem with the actual is, that my signalstrength is weak and so i wanted to flash the recommended for this rom, and so i recognized there is something wrong, cause my problem here occured.
normally i sync with myphoneexplorer so i didnt realize that mass storage didnt function anymore.
and because earlier i got no problems, i think more and more, that something on the phone went wrong.
maybe it helps if i go back to stockrom and undo all changes i made, to start all over again?
again thanks mate for your effort to help me out
Click to expand...
Click to collapse
you´re welcome companion
i reded in a spanish forum ( www.htcmania.es ) about your problem and there´s people that had the same problem with a S.GALAXY S & desire HD...
someone was solved it fullwiping and formating (in the paragraph of mounts & storage into CWM) and flashing another ROM... then they formatted their sd card with a card reader OF THE PC... later they was formatted the sd card from the pc and the problem was disapeared successfully...
BUT if it persists i think that you should (mi suggestion) send your machine to the thecnical service....
ok, will try this today evening when i'm home. if this doesnt work i will reset it in the orginial state and send it to the technical support. i will leave a comment if i was successful, perhaps this will help others with the same problem.
schorschl said:
ok, will try this today evening when i'm home. if this doesnt work i will reset it in the orginial state and send it to the technical support. i will leave a comment if i was successful, perhaps this will help others with the same problem.
Click to expand...
Click to collapse
good idea mate
see you soon
finally after long hours of work, i have to state, that nothing changed.
i tried everything, but its still the same.
so i think i will send it in to the technical service.
does anyone of you know if they will say something about the software i changed? because i now i cant go back to stock radio.
thanks for your help.
finally after long hours of work, i have to state, that nothing changed.
i tried everything, but its still the same.
so i think i will send it in to the technical service.
does anyone of you know if they will say something about the software i changed? because i now i cant go back to stock radio.
thanks for your help.
Click to expand...
Click to collapse
oops!!don't say anything LOL! you lose warranty...unroot and disable custom recovery...of your phone flashing an official ruu and then do S-OFF... ITS sufficient..
edit: sorry FOR your DHD
Sent from my Nokia 3210 running the worst symbian using the XDA app powered by LOL
hi mate, i also had the same problem, i connected my dhd to the back usb port of my pc and it was ok. and i also got this problem when i was using a non genuine htc usb cable.
weird!!! can it be possible?
EDIT:I´M using a NOKIA N97 genuine cable and works perfect... LOL
After solving this problem I got a new one. My SGN won't mount even though I have USB debugging on. Windows both 64bit and 32bit won't recognize it. I try to install/reinstall the drivers but I can't since the phone won't mount. I haven't found any similar problems to this for SGN. Any suggestions/directions?
Thanks in advance.
p.s. I started a new thread since this is a different problem and probably not connected to the previous. I hope that's ok.
aventinus said:
After solving this problem I got a new one. My SGN won't mount even though I have USB debugging on. Windows both 64bit and 32bit won't recognize it. I try to install/reinstall the drivers but I can't since the phone won't mount. I haven't found any similar problems to this for SGN. Any suggestions/directions?
Thanks in advance.
p.s. I started a new thread since this is a different problem and probably not connected to the previous. I hope that's ok.
Click to expand...
Click to collapse
Just starting with the basics here. But have you tried a different USB port? If it's a desktop, the ones in the back (directly connected to the motherboard) are usually your best bet.
Second, are you using the stock cable? I've had problems with a few phones I've worked on that didn't like communicating with non factory cable.
ctyonthehil said:
Just starting with the basics here. But have you tried a different USB port? If it's a desktop, the ones in the back (directly connected to the motherboard) are usually your best bet.
Second, are you using the stock cable? I've had problems with a few phones I've worked on that didn't like communicating with non factory cable.
Click to expand...
Click to collapse
I have tested every usb port both in my PC and laptop. I have used two different cables and I tried both Windows and Linux (Ubuntu). The cables are fine, my HTC Desire connects just fine. The phones charges but not connecting and this happened an hour ago after solving the previous problem I mentioned it the first post. So I'm 99% sure that the problem is about the device, not the PC/Laptop.
Read the connected thread to get the history of what happened. After returning to stock ICS I got the message for the JB update. Updated and now the phone works fine except the USB debugging and the fact that I don't have CWM atm. I can't install it either because I need to mount the phone. :/
Thanks for the quick reply though.
EDIT: Forgot to mention that the device when connected does nothing, doesn't matter if I have USB debugging on or off.
aventinus said:
I have tested every usb port both in my PC and laptop. I have used two different cables and I tried both Windows and Linux (Ubuntu). The cables are fine, my HTC Desire connects just fine. The phones charges but not connecting and this happened an hour ago after solving the previous problem I mentioned it the first post. So I'm 99% sure that the problem is about the device, not the PC/Laptop.
Read the connected thread to get the history of what happened. After returning to stock ICS I got the message for the JB update. Updated and now the phone works fine except the USB debugging and the fact that I don't have CWM atm. I can't install it either because I need to mount the phone. :/
Thanks for the quick reply though.
EDIT: Forgot to mention that the device when connected does nothing, doesn't matter if I have USB debugging on or off.
Click to expand...
Click to collapse
Just out of curiosity are you using a legal with fast charge turn on because you can't mount the phone and use fast charge. If so turn it off and try again.
Sent via moon rays...
I had a similar problem and had to go buy a data microUSB to USB cable from RadioShack, instead of using the cable that connects to a charger.
Sent from my Galaxy Nexus
aventinus said:
Read the connected thread to get the history of what happened. After returning to stock ICS I got the message for the JB update. Updated and now the phone works fine except the USB debugging and the fact that I don't have CWM atm. I can't install it either because I need to mount the phone. :/
Click to expand...
Click to collapse
You can install ROM Manager from the app store and flash CMW Recovery from there.
---------- Post added at 09:01 AM ---------- Previous post was at 08:54 AM ----------
netbuzz said:
You can install ROM Manager from the app store and flash CMW Recovery from there.[/QUOT
I said "app store", wtf! I never even owned an iphone, lol. Here's the link to what you need: https://play.google.com/store/apps/...xLDMsImNvbS5rb3VzaGlrZHV0dGEucm9tbWFuYWdlciJd
Once installed, go to the app, the top option will flash CMW Recovery to your phone.
Click to expand...
Click to collapse
aventinus said:
I have tested every usb port both in my PC and laptop. I have used two different cables and I tried both Windows and Linux (Ubuntu). The cables are fine, my HTC Desire connects just fine. The phones charges but not connecting and this happened an hour ago after solving the previous problem I mentioned it the first post. So I'm 99% sure that the problem is about the device, not the PC/Laptop.
Read the connected thread to get the history of what happened. After returning to stock ICS I got the message for the JB update. Updated and now the phone works fine except the USB debugging and the fact that I don't have CWM atm. I can't install it either because I need to mount the phone. :/
Thanks for the quick reply though.
EDIT: Forgot to mention that the device when connected does nothing, doesn't matter if I have USB debugging on or off.
Click to expand...
Click to collapse
No problem.
I was unable to mount with my Razr after I factory wiped to sell it a few weeks back. I wanted to make sure my SD ext had been wiped with the reset, but it wouldn't mount. Performed another factory reset and that solved the problem. That was with stock OTA ICS though.
However, I'm not sure that would help you much in this case since it looks like you did a clean install.
Sent from my Galaxy Nexus using xda premium
I've been having some trouble with this too. My phone does connect and "mount" (that's not exactly what happens, since it uses MTP rather than USB Mass Storage), but it always takes a while. The phone device shows up immediately, but the actual storage (shown under the phone device) always takes a minute or so to show up. It works just fine after that, but it's still pretty annoying to have to wait. I don't think I had this behavior before JB.
RoadHazard said:
I've been having some trouble with this too. My phone does connect and "mount" (that's not exactly what happens, since it uses MTP rather than USB Mass Storage), but it always takes a while. The phone device shows up immediately, but the actual storage (shown under the phone device) always takes a minute or so to show up. It works just fine after that, but it's still pretty annoying to have to wait. I don't think I had this behavior before JB.
Click to expand...
Click to collapse
Mine does that too but what I've noticed is that if I have a screen lock/pin set that I have to unlock it first before it will show up
slickrickstyles said:
Mine does that too but what I've noticed is that if I have a screen lock/pin set that I have to unlock it first before it will show up
Click to expand...
Click to collapse
Oh, you're right! Just checked to make sure, and that's exactly what's going on. The internal storage shows up the second I unlock the phone, and if it's already unlocked when I connect it the storage shows up immediately. Guess I've always unlocked the phone after a while when it hasn't seemed to be working in the past, to check that it's indeed connected using MTP, but just haven't realized that unlocking it is what makes it show up. But that actually makes perfect sense, of course - you wouldn't want anyone to be able to access the files on a locked phone by just connecting it to a computer.
hungmung said:
Just out of curiosity are you using a legal with fast charge turn on because you can't mount the phone and use fast charge. If so turn it off and try again.
Sent via moon rays...
Click to expand...
Click to collapse
+1. Fast Charge could be enabled by your kernel. If you use the Franco update app or Trinity kernel control you should check that.
ATT Galaxy S3
SGH-i747m
4.0.4
kyanROM 1.3
I am currently unable to connect my phone to a PC or MAC using the usb cable. I have tried just about everything I can think of with no luck.
what I have tried so far is:
restarting my computer and phone
different computers mac and pc.
different usb cable
uninstalling and reinstalling samsung drivers from PC
tried switching from mtp, to ptp, to adb, using phoneutility (*#7284#)
pulled battery
wiped cache partition
fixed permissions
I even booted the phone into download mode and connected to odin.
I see nothing.
any ideas? I am at a loss. I cant find any info or similar case.
edit: i also tried downloading kies and using the connection troubleshooting utility.. no luck
usb debugging is on but tried with it off as well.
I've been having the same issue on my Win7 home premium.
The phone is charging but can't see folders.
It works on OSX as a Camera though.Click on "Connected as a media device" from the pulldown menu and select "Camera", youll also need a program on OSX. Go to
androidDOTcom/filetransfer/ (i'm under 10 posts so probably can't post links)
rallysquirrel said:
I've been having the same issue on my Win7 home premium.
The phone is charging but can't see folders.
It works on OSX as a Camera though.Click on "Connected as a media device" from the pulldown menu and select "Camera", youll also need a program on OSX. Go to
androidDOTcom/filetransfer/ (i'm under 10 posts so probably can't post links)
Click to expand...
Click to collapse
Part of the problem is I am never getting the "connected as media device" message.
the phone only charges when connected to a computer...mac or pc
Try using a different usb cable. Something pretty short. I've had many a cables stop working. Also try a different USB port on the computer.
rallysquirrel said:
Try using a different usb cable. Something pretty short. I've had many a cables stop working. Also try a different USB port on the computer.
Click to expand...
Click to collapse
I have tried about 4 different usb cables on 3 different computers.
2 pc one mac
some of these cables I know for a fact were working at one point.
I am thinking it is my phones hardware at this point.
lakser said:
ATT Galaxy S3
SGH-i747m
4.0.4
kyanROM 1.3
I am currently unable to connect my phone to a PC or MAC using the usb cable. I have tried just about everything I can think of with no luck.
what I have tried so far is:
restarting my computer and phone
different computers mac and pc.
different usb cable
uninstalling and reinstalling samsung drivers from PC
tried switching from mtp, to ptp, to adb, using phoneutility (*#7284#)
pulled battery
wiped cache partition
fixed permissions
I even booted the phone into download mode and connected to odin.
I see nothing.
any ideas? I am at a loss. I cant find any info or similar case.
edit: i also tried downloading kies and using the connection troubleshooting utility.. no luck
usb debugging is on but tried with it off as well.
Click to expand...
Click to collapse
did this problem started since you flashed Kyan rom 1.3 cause I had the same problem a few weeks ago and I recently flashed the latest CM10 rom and everything works fine now. Does your phone charge when you plug it?.
My phone charges when I plug it in.
I can't be sure if this only happend after I flashed kyanROM 1.3.
That is definitely something I did since the last time it was pluged into a computer.
Maybe ill just flash cm10.
Sent from my SGH-I747M using xda app-developers app
lakser said:
My phone charges when I plug it in.
I can't be sure if this only happend after I flashed kyanROM 1.3.
That is definitely something I did since the last time it was pluged into a computer.
Maybe ill just flash cm10.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
it looks like a driver issue to me! do you Have the snapdragon toolkit install on your computer? If not you can find it ther: http://forum.xda-developers.com/showthread.php?t=1746665
try the first step uninstall your driver and then install them using the toolkit
If you are using your front usb port try switching to your back usb port sometimes devices don't like the front usb port
lakser said:
Part of the problem is I am never getting the "connected as media device" message.
Click to expand...
Click to collapse
Sounds like it may indeed be a problem with the phone's hardware. You might want to try taking it into the store to see if they can reproduce.
i re-flashed my phone using an old backup from when i knew usb connectivity was working,
still not working.
Brought the phone to an ATT device support center while on stock rooted rom.
They didn't realize the phone was rooted and they couldn't re-flash my phone without usb connectivity so I got it replace.
I am going to run stock rom for a bit... maybe until the official jelly bean release.
then maybe ill go back to Kyanrom or cm10... any suggestions?
Ilso I am not sure what created my usb issue.
I think it was my regular use of an old iPad power brick.
I am going to only use the stock charger from now on and hope that problem doesn't come back.
lakser said:
I have tried about 4 different usb cables on 3 different computers.
2 pc one mac
some of these cables I know for a fact were working at one point.
I am thinking it is my phones hardware at this point.
Click to expand...
Click to collapse
Had the same problem, but my work machine has never once gave me a problem, the one at home does this exact same thing, it maybe a phone hardware problem if you see it doing it on another machine, but I dunno, only reason I haven't fixed the home issue is, I do NOT want to re-install win7, my linux box see's it perfect every time also. I read somewhere in a forum, that it is a samung/microsoft driver bug. It is stored in the registry somewhere, what I saw was I had it working perfectly, then I plugged in my MyTouch to push a stock rom onto it, and then the next time I went to plug in the SG3 the problem started. Windows acts real stupid when you continuously keep plugging in different devices all the time. But then again, you said you tried it on a mac. Humm! Again, this is my opinion only.
same problem i have with no solution need help also please
same problem i have without any solution i need help please
Had the same problem, but with a brand new SGS3 with the stock ROM and cable. Plugged in my Nexus 7 cable instead and that works for some reason. Will bother best buy about it I guess.
got the same issue. tried to sync some files over from the gs3 to my laptop and it only charges the phone, does not recognize it . tried several cables and tried on my desktop, nothing. now im in search cuz this kinda sucks. i flashed CM10 ROM2 and it stopped working for me after that, tried restoring back to rooted stock TW but nothing still. still looking for a fix.
One thing I noticed is that all the computers where I'm having issues are running win7. One win7 home premium and the other win7 pro.
In the office I have XP pro and it recognizes the phone with no problems.
I bought two brand new Samsung adaptive fast chargers (USB brick & cable) the other day and my phone will not fast charge and my PC will not recognize it. Every time I connect my note 4 to my pc the error message says "USB device not recognized." I've tried everything. I stalled kies, uninstalled then reinstalled my drivers, even took my phone to a repair shop to put in a new charging port.... I have 2 laptops. One is running windows 10 and the other is running windows 7 and they both give me the same error message. I'm pulling my F*****in hair out!!!!!!!!!
Someone please help!!
Akashp2011 said:
Someone please help!!
Click to expand...
Click to collapse
You didn't give much in the way of background but I'll do what I can. I'm on Jasmine ROM, which is pretty much stock Marshmallow.
When I plug in my fast charger, nothing I can see says it's fast charging. There's a box in settings>battery to check for fast charging.
As far as the connection to your computer goes: when I plug in and I pull down on the notification bar, there's a tab that for me says "USB Charging." If I touch on that tab, it'll give a list of options, one of which is "File Transfer." Click on that radio button. If you like, you can go into settings>developer options and touch "USB Configuration." Click on the "MTP" radio button and file transfer will be the default mode when you plug in.
If this seems obvious, I'm sorry. I don't know what level of experience you have with your phone or your phone's configuration. It's not a common problem which is why it took some time to get to answer your question.
douger1957 said:
You didn't give much in the way of background but I'll do what I can. I'm on Jasmine ROM, which is pretty much stock Marshmallow.
When I plug in my fast charger, nothing I can see says it's fast charging. There's a box in settings>battery to check for fast charging.
As far as the connection to your computer goes: when I plug in and I pull down on the notification bar, there's a tab that for me says "USB Charging." If I touch on that tab, it'll give a list of options, one of which is "File Transfer." Click on that radio button. If you like, you can go into settings>developer options and touch "USB Configuration." Click on the "MTP" radio button and file transfer will be the default mode when you plug in.
If this seems obvious, I'm sorry. I don't know what level of experience you have with your phone or your phone's configuration. It's not a common problem which is why it took some time to get to answer your question.
Click to expand...
Click to collapse
I've tried everything I can think of including the tips you provided. I'm on PaulPizz's rom and I didnt have these problems before. Every time I connected my charger, it gave me a notification that it was fast charging, now it doesnt. Now when I connect my device to my pc, my Note 4 doesnt give me any options. Not even MTP or PTP. It's as if i dont even have it connected to my computer.
Akashp2011 said:
I've tried everything I can think of including the tips you provided. I'm on PaulPizz's rom and I didnt have these problems before. Every time I connected my charger, it gave me a notification that it was fast charging, now it doesnt. Now when I connect my device to my pc, my Note 4 doesnt give me any options. Not even MTP or PTP. It's as if i dont even have it connected to my computer.
Click to expand...
Click to collapse
You may have gotten a bad flash. I don't have experience with PaulPizz's ROM but since I believe it's based on the OEM Marshmallow... you are on that version of the ROM, correct?... I'd suggest you try flashing again. And if not PaulPizz, it's all working good for me on Jasmine.
And if you are using the Marshmallow version of PaulPizz, did you unlock the Marshmallow bootloader? You need to be careful. It's quite confusing because Marshmallow ROMs don't necessarily have to use Marshmallow bootloaders. But if the ROM uses a Marshmallow base, your bootloader must be Marshmallow as well.
douger1957 said:
You may have gotten a bad flash. I don't have experience with PaulPizz's ROM but since I believe it's based on the OEM Marshmallow... you are on that version of the ROM, correct?... I'd suggest you try flashing again. And if not PaulPizz, it's all working good for me on Jasmine.
And if you are using the Marshmallow version of PaulPizz, did you unlock the Marshmallow bootloader? You need to be careful. It's quite confusing because Marshmallow ROMs don't necessarily have to use Marshmallow bootloaders. But if the ROM uses a Marshmallow base, your bootloader must be Marshmallow as well.
Click to expand...
Click to collapse
I'm on his latest version of 5.1.1. It did this before I flashed his newest rom. I flashed it thinking it would fix the issue but it didnt. I put his rom on my SD card after i connected it to my computer by itself with an adapter. I did everything right. Wiped data and cache before flashing. The rom works perfectly. I'm really hoping it's not a hardware issue, but unfortunately that's a possibility. I can't upgrade to MM because I have to use Odin and I can't even use it.
Akashp2011 said:
I'm on his latest version of 5.1.1. It did this before I flashed his newest rom. I flashed it thinking it would fix the issue but it didnt. I put his rom on my SD card after i connected it to my computer by itself with an adapter. I did everything right. Wiped data and cache before flashing. The rom works perfectly. I'm really hoping it's not a hardware issue, but unfortunately that's a possibility. I can't upgrade to MM because I have to use Odin and I can't even use it.
Click to expand...
Click to collapse
Give hsbadr's Jasmine ROM a shot. I wouldn't worry about going the 4.3 route. Just flash the 4.0 and see if the problem goes away. If it doesn't, I'll have to agree that it's a hardware issue. If it does go away, then you can install 4.3 and the fixes.
Backup your current ROM first. Check off all of the boxes. Wipe the Dalvik/cache/system/data, (you didn't mention that you wiped the system) then flash the ROM. If you have anything like pictures or music on your internal storage, move them somewhere safe first. Let us know how it works out for you, and good luck.
douger1957 said:
Give hsbadr's Jasmine ROM a shot. I wouldn't worry about going the 4.3 route. Just flash the 4.0 and see if the problem goes away. If it doesn't, I'll have to agree that it's a hardware issue. If it does go away, then you can install 4.3 and the fixes.
Backup your current ROM first. Check off all of the boxes. Wipe the Dalvik/cache/system/data, (you didn't mention that you wiped the system) then flash the ROM. If you have anything like pictures or music on your internal storage, move them somewhere safe first. Let us know how it works out for you, and good luck.
Click to expand...
Click to collapse
Thanks man. I'll give that a shot. And yes I did wipe dalvik, cache, data, and system. Ill flash Jasmine Rom tonight and give you an update.
Akashp2011 said:
Thanks man. I'll give that a shot. And yes I did wipe dalvik, cache, data, and system. Ill flash Jasmine Rom tonight and give you an update.
Click to expand...
Click to collapse
Did you ever have any luck with anything? I have the same issue on my note 4, my usb port is basically useless other than slow charging. I have even replaced the port twice in efforts to fix it, tried different roms, etc. At this point I believe it is hardware, something with the motherboard.
Let me know if you have had any success with anyhting
Fast charge wont work
I too have the same problem. It quit fast charging. I ordered genuine Samsung battery and charge cable. It dont work. Its not the battery or charging device. I finally got it hooked to my pc or recognize it. Fast charge wont work. Its not the batt, charger, or port. Its either VZN software or a hardware issue. I am trying to downgrade it to 6,0 to see if it 6.1 upgrade. Kies wont let me downgrade. I really think it is a bug in Verizon 6.1 upgrade. Any help will be appreciated
My phone will fast charge on my two vehicle chargers (at 1.5 amps and 2.1 amps), but refuses to change any faster than 500 mA on two separate fast charger bricks. The same bricks work fine for fast charging other phones, so it's my phone, not the charging hardware. I'm using the same cable for all instances, which leads me to believe that something is wrong with how the phone interprets the "smart charging" signal on the bricks, or that the phone is sending the wrong charging signal.
Does anyone have the issue with bricks but not with chargers without "smart charging" capabilities?
I've had this problem on stock 5.1.1, Jasmine rom 6.0.1, and now CM13. I full wiped everything when reinstalling, so either it's hardware, or an issue propigated through many roms. I've tried a few different kernels too, just to see if that was the problem.
Akashp2011, did you flash both the rom and the kernel for Paul Pizz? I never tried that combination.
I'm changing the battery tomorrow to check that possibility.