My phone will not let me flash anything if I use mobile odin with EL26. Just aborts every rom I try to flash.Theyre all roms that I have flashed before so its not the downloads.But if I flash CM7 and use the EL26 thats baked into that rom I can flash anything like normal. Ive downloaded EL26 like 4 different times and it still abprts everything i try to flash except for Calks format all. could it be mobile odin?? I have had it on my phone for a few months but i downloaded it through Blackmart Alpha. could it be that version ??? Any help would be appreciated.
As we all recommend, get your apps from the play store. Also, the small fee to support the devs for your app is worth it as opposed to possible headache you get when you get a bootlegged or base version. I recommend trying the EL29 tar with direct boot to clockwork, and mobile Odin From the play store. Try that tar and see if that helps
Sent from my SPH-D710 using xda app-developers app
mremale said:
As we all recommend, get your apps from the play store. Also, the small fee to support the devs for your app is worth it as opposed to possible headache you get when you get a bootlegged or base version. I recommend trying the EL29 tar with direct boot to clockwork, and mobile Odin From the play store. Try that tar and see if that helps
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I did reset to EL29. then I flashed CM7 and flashed supernova rom, then flashed cm7 again with agats recovery on the supernova rom and the same thing happened. i dont understand why this is happening. just says aborted. it does the same thing whether I flash EL26 thru Odin, mobile odin or on CM7. Ive had and used all these roms many times before so i know the rom downloads arent bad.
Greek81 said:
I did reset to EL29. then I flashed CM7 and flashed supernova rom, then flashed cm7 again with agats recovery on the supernova rom and the same thing happened. i dont understand why this is happening. just says aborted. it does the same thing whether I flash EL26 thru Odin, mobile odin or on CM7. Ive had and used all these roms many times before so i know the rom downloads arent bad.
Click to expand...
Click to collapse
I formatted my SD card and USB storage and Odined EL29 reset. I flashed CM7 successfully through CWM rogue and then tried flashing 5 different roms with CM7's EL26 kernel and its still aborting everything I try to flash. The only thing it will flash is Calks format all. Can someone please help??
Are you verifying the md5 of the stuff you download. How about using a pc instead of mobile odin?
Are you using Chris' CWM recovery? I just found out in another thread that it is an issue. Flash agats kernel it has another recovery repacked with it.
Sent from my SPH-D710 using xda app-developers app
g_ding84 said:
Are you using Chris' CWM recovery? I just found out in another thread that it is an issue. Flash agats kernel it has another recovery repacked with it.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Yes like I said up top I've tried windows Odin, mobile Odin and CM7 which has the EL26 kernel baked in and still the same thing. I was always told on here to only use el26 for flashing ICS roms. If agats is safe I will try it. All the roms I'm trying to flash I have already flashed before and they were fine. I tried flashing GB Blazer with EL26 and it gets aborted just like the rest. But after I run one click and reset my phone with el29 cwm rogue I can flash the GB blazer rom no problem. It seems that as soon ad I install el26 everything goes wrong . And yes I've redownloaded it several times.
Greek81 said:
Yes like I said up top I've tried windows Odin, mobile Odin and CM7 which has the EL26 kernel baked in and still the same thing. I was always told on here to only use el26 for flashing ICS roms. If agats is safe I will try it. All the roms I'm trying to flash I have already flashed before and they were fine. I tried flashing GB Blazer with EL26 and it gets aborted just like the rest. But after I run one click and reset my phone with el29 cwm rogue I can flash the GB blazer rom no problem. It seems that as soon ad I install el26 everything goes wrong . And yes I've redownloaded it several times.
Click to expand...
Click to collapse
Yes Agats is safe. I flashed a few ICS roms. heck, i flash between the two roms in my sig. lol
g_ding84 said:
Yes Agats is safe. I flashed a few ICS roms. heck, i flash between the two roms in my sig. lol
Click to expand...
Click to collapse
Ok I rerooted my phone with FF18 reset and installed agats recovery successfully. I flashed supergalaxy successfully. I wanted to flash another rom so I flashed Agats recovery 0.2.1 (the same one that I installed with autoroot, that worked fine when I flashed supergalaxy rom) that i downloaded from the repository. it aborted everything I tried to flash. what is going on with my phone???
I dont get it I just flashed super galaxy right after I rotted my phone and installed agats rec, but now I cant flash anything again.I rerooted with FF18 and reinstalled agats recovery like I did earlier and its aborting everything I try to flash. Can someone please help, this is very frustrating. It doesnt make sense, I havent ever had any problems flashing anything, and now I cant flash any of the roms that I have flashed a dozen times with the same recovery I have used a dozen times to flash those same roms. and now agats recovery is doing the same thing.
Greek81 said:
I dont get it I just flashed super galaxy right after I rotted my phone and installed agats rec, but now I cant flash anything again.I rerooted with FF18 and reinstalled agats recovery like I did earlier and its aborting everything I try to flash. Can someone please help, this is very frustrating. It doesnt make sense, I havent ever had any problems flashing anything, and now I cant flash any of the roms that I have flashed a dozen times with the same recovery I have used a dozen times to flash those same roms. and now agats recovery is doing the same thing.
Click to expand...
Click to collapse
There must be a problem with that super galaxy rom. I would stay away from it if it causing you problems. what other roms are you trying to flash? are you doing full wipes between? also could it be and issue because its a De-Odexed rom? (any one)
this started way before the super galaxy from. If you read back you will see that I've flashed all these roms before. I used to flash a different rom every few days, not new ones just different ones. All of them that i had run before with no problems. All the same downloads. Then one day I Mobile odined el26 and it aborted what ever I was flashing, and kept aborting everything except for calks format. So I wiped my SD card and USB storage and used sfhubs el29 reset and installed cwm rogue . I flashed cm7 with no problem but then I couldn't flash anything else . Its seems that as soon as I get on el26 I can't flash anything. Yesterday I used sfhubs ff18 one click root and installed agats cwm 0.2.1 and flashed a rom successfully. Then i tried flashing something else and same thing, aborted. it doesn't make any sense. This started out of no where with rooms I've flashed many times and the el26 kernel I had been using for over 2 months. I even redownloaded el26 and a different rom , flashed it after I ran el29 auto root one click ( what ever its called) and it happens again with all new downloads and a freshly wiped and formatted phone. And yes I always wipe. Data reset, cache, dalvick, format system and calks format. Something is definitely wrong.
Sent from my SPH-D710 using xda app-developers app
I thought we arent supposed to flash an ICS rom with EL29
Sent from my SPH-D710 using xda app-developers app
can any of the devs out there lend there support ? Or anyone that is familiar with my problem. I'd really appreciate it, cause I've tried everything and still can't get anything to flash. Fresh downloads, wiped and formatted my phone, Sfhubs resets, I've tried everything. My email is [email protected].
Sent from my SPH-D710 using xda app-developers app
Related
Hey all,
A few months back I updated (through odin) to EF02 rooted and haven't been tampering or updating since. This past week I've had some extra time so I've been going through my normal routine of backing up through clockworkmod and titanium etc. However, when I reboot into cwm recovery I get an error saying it has aborted and only four options (I think they are reboot, wipe, update, and dalvik cache) come up.
To add to my problems, when I open the ROM Manager app, I only have the option to update to cwm for the I9000 (obviously I have an epic).
Any solutions? I would prefer not to odin because I cannot back anything up yet and I have things that I need to save.
Thanks!
Have you tried reflashing CWM 3.1.0.1 or Odining it in?
Sent from my SPH-D700 using XDA App
kennyglass123 said:
Have you tried reflashing CWM 3.1.0.1 or Odining it in?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
This. Odin CWM recovery and don't use rom manager, at all our phone isn't supported yet.
Sent from my SPH-D700
Got it to work. Thanks guys!
I have my rooted E4GT and the Blazer ICS Rom is installed on it at the moment. I kinda want to try and switch to AOKP's latest build and try it out, but I'm not sure how to go about doing that since they clearly stated not to flash from ICS to ICS.
Could anyone point me in the right direction as to what I should do in order to make the switch to AOKP?
Links to both ROM's respective threads:
AOKP Build 40
Phantom's Blazer Rom
Thanks for your time.
You can just Odin the el26 cwm (sorry don't have the link to it on my phone) and flash AOKP from there.
Sent from my SPH-D710 using xda app-developers app
This is my method, it is 99.9% safe. You can also re-use it to go from other ROMs to any other ics ROM.
Download these drivers
Download this: OC ODIN File for EL26 and this: E4GT Root Utility
Using Titanium Backup, make a backup of all your stuff, or use your preferred back-upper, just not nandroid. I recommend buying the Pro version, because it will save you so many times, and the dev is great. It's a little expensive though for an app.
OC Odin back to EL26. The good thing about this is, the process is straight forward, and doesn't add to your flash counter, and does not yellow triangle either.
Open up e4gtauto-sfx.exe, option C, then I. This gives you CWM, And just in case, I do not recommend using other than standard CWM to flash ICS roms. but that's me.
When your phone reboots, it should have CWM, and be rooted, just load up the AOKP files, do a data wipe, and flash.
Thank you both for the replies
Would I be able to use calkulins format all to do the wipes? Or does that only work for certain ROMS? It seemed pretty fool proof when I used it, so I was wondering if I could just use that again and it would work just the same? I don't want to forget something and brick my phone as a result
And I'll look into titanium backup, thanks for the suggestion.
Sent from my SPH-D710 using xda app-developers app
organizedConfoosion said:
Thank you both for the replies
Would I be able to use calkulins format all to do the wipes? Or does that only work for certain ROMS? It seemed pretty fool proof when I used it, so I was wondering if I could just use that again and it would work just the same? I don't want to forget something and brick my phone as a result
And I'll look into titanium backup, thanks for the suggestion.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
For ICS ROMs, I recommend to not use it, just do 1 system data wipe and you'll be fine.
F3L1XZS said:
For ICS ROMs, I recommend to not use it, just do 1 system data wipe and you'll be fine.
Click to expand...
Click to collapse
Alright, but all I should need to do is install the EL26 + CWM and I can flash AOKP? I don't need to go back to a stock gingerbread ROM or anything, or will the OC EL26 CWM do that for me?
And you said you don't recommend calkulin's format all for ICS roms, but that's what I was told to use for the Phantom Blazer ICS rom when I was flashing it?
Also, one more question; what is "flash count" and is it a bad thing? I'll do some googling on it myself, but I'd like to hear your explanation because I don't always understand people's ways of describing things and usually take weird explanations to understand so yours would still be much appreciated just in case, thanks. ^_^
organizedConfoosion said:
Alright, but all I should need to do is install the EL26 + CWM and I can flash AOKP? I don't need to go back to a stock gingerbread ROM or anything?
Click to expand...
Click to collapse
You just need to be on a safe recovery.... if you wipe data in an unconfirmed recovery you can cause a brick. Either use the el26 that all use or the el29-reboot kernel. Both will work no matter what you install regardless of you install (granted you flash a working rom). I prefer the el29 because you install via mobile Odin and it boots straight to safe CWM recovery.
Sent from my SPH-D710 using xda app-developers app
dante32278 said:
You just need to be on a safe recovery.... if you wipe data in an unconfirmed recovery you can cause a brick. Either use the el26 that all use or the el29-reboot kernel. Both will work no matter what you install regardless of you install (granted you flash a working rom). I prefer the el29 because you install via mobile Odin and it boots straight to safe CWM recovery.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Hmm, alright, sounds good.
Also, which data's do I need to wipe? Dalvik cache and there's one other I believe?
ok I've rooted and installed clockwork recovery as per the instructions in the how to. Still each time I go to flash a rom I get nothing but the galaxy sII logo and it hangs there indefinitely. Did I miss a step in these instructions ? I'm on EL29 baseband if that helps.
http://www.youtube.com/watch?v=v7pWjmKCsoc
those are the instructions I used. and I don't think I've missed a step. I've reverted back to stock and re rooted my phone and installed clockwork. How do I get roms to actually flash?
Depends, what are you trying to flash?
Sent from my SPH-D710 using xda app-developers app
I see the link in your video is just for rooting, but you can get into CWM? did you try the auto root EL29+CWM? Also, if you are following to Devs instructions on how to flash the ROM you should be good to go. have you tried wiping everything first or just installing it over the previous ROM? i suggest downloading Calkulin's Format All zip. flash it before you flash a ROM.
Link: http://forum.xda-developers.com/showthread.php?t=1527041 its at the bottom of the 1st post.
Link: http://forum.xda-developers.com/showthread.php?t=1342728
is this what you used for CWM?
yeah those are the things I used actually to get clockwork. It'll let me use clockwork, wipe everything install whatever but when I go to reboot to start it up it hangs at the galaxy s2 screen. I let it go for 2 hours last night. Any rom honestly would be fine at this point. I'm pretty familure with twrp,cwm,and 4ext from the evo 3d but nothing works with this phone.
Would the steps for flashing a rom say blazer for example be
Wipe data, dalvik, and chache.
flash zip from sd reboot? like normal or am I missing a step with another kernel or something?
it would be the same. but I use the Calkulin's Format All zip to do it for me. I know you do get a longer boot then normal because its building delvik cache but not two hours. have you tried downloading the ROM to your computer and then transfering it over to your phone? I had an issue a few days ago because of a bad download(good thing I had my nandriod). What CWM do you have? 5.0.2.7?
yeah thats the only way I do it actually. D/l from the laptop and copy it to sd. then use calkulins to wipe everything and it still just sits.
I just googled "flash ROM boot loop" it came up with something. What is your default launcher? Some people have had problems if they use for say go launcher or another launcher and not have one set as default. On calkulins ROM.
Sent from my SPH-D710 using xda app-developers app
I am still on the stock rom. only thing I can do is root it with odin and and add clockwork mod with e4gtauto prog. I still have no idea whats going on.
So your on stock TW launcher?
Try flashing a different kernel. Like rogue, that is another recovery based off of CWM. That's what I use, well I use both and haven't had a problem. Another thing is get an MD5 checksum program for your laptop and check the file sum for integrity. Sorry it took me awhile to respond, finally have a day off.
Sent from my SPH-D710 using xda app-developers app
I actually tried flashing one wth mobile odin that I found on the cyanogenmod page. It booted to the android text logo and that was it. so thats a step in the right direction. Should I just flash it through clockwork after I flash the rom like normal?
That's your problem. If your flashing a GB ROM you need a GB kernel. If your flashing an ICS ROM you need preferably EL26 kernel then use CWM to flash the ROM and kernel. flash the rogue kernel in the kernel repository then try flashing a GB ROM. After that then you should be good to go.
Sent from my SPH-D710 using xda app-developers app
I appreciate the help so much dude. so When I get home I should flash the kernel through odin then boot into recovery n flash the rom n I should be good? or do I just boot into recovery n flash the rom then the kernel? sorry about so many q's.
No problem. That's what the forum is for. let me know how it works out for ya.
Sent from my SPH-D710 using xda app-developers app
And yes flash it through Odin and boot into recovery and flash your ROM. you can also flash the ROM in CWM and then flash the kernel right after you flash the ROM. It seems to be easier in CWM then Odin.
Sent from my SPH-D710 using xda app-developers app
I must be an idiot or my phone doesn't wanna do it. Tried flashing the kernel and aokp a few times now and got nothing. I must be using the wrong stuff for the Job.
Get yourself back to stock with cwm. Pick a ROM and follow the directions in the op for that specific ROM. If anything seems unclear watch one of qbking77's videos on how to install that ROM. Qb has NEVER steered me wrong.
Blu Kuban
Its what all the cool kids are using.
Noob trolled the troll that tried to troll the Noob.
~~~coal686~~~
Ravaged Pheonix said:
Get yourself back to stock with cwm. Pick a ROM and follow the directions in the op for that specific ROM. If anything seems unclear watch one of qbking77's videos on how to install that ROM. Qb has NEVER steered me wrong.
Blu Kuban
Its what all the cool kids are using.
Noob trolled the troll that tried to troll the Noob.
~~~coal686~~~
Click to expand...
Click to collapse
That's what I've been telling him. Do you have anything else that maybe I'm forgetting? Maybe EL26 direct boot?
Sent from my SPH-D710 using xda app-developers app
thats kinda what I've been doing. I got cyanogen to boot with the rogue et recovery fb27 and cm9 but market won't actually work. so I went back to stock. I actually used qbking's videos to start with and followed them and it still just hangs. This is the process I'm using.
flash kernel/recovery through odin.
calkulins wipe all
flash rom
flash gapps if needed for said rom
reboot.
I've also tried without the 1st step.
I've tried flashing the el26 kernel that everyone seems to say is safe through odin and that boots me into the recovery and I try to wipe then flash and it still does nothing. am I just flashing the wrong intitial kernel to begin with? I can't figure out why Im having this problem now since I've had multiple rooted phones in the past with no issues.
But now I'm back on stock gingerbread again completely just rooted and then the did the e4gtauto to get a recovery.
I'm new to Samsung Android phones, and new to the E4GT, so I need a little help.
I always flash the zip for the EL26 CWM5 recovery like instructed, soooo, here is my issue.
I'm running AOSP and thought I would try CM10 JB, soooo, I flashed into EL26, performed a full nandroid to my Ext SD. I flashed JB and gave it a shot. For issues known to all, I wanted to switch back
So, I went into recovery, flashed the EL26 recovery and rebooted recovery, I then restore the nandroid backup I just made, rebooted, went to the Samsung screen (with the yellow !). After some time, about 20-30 seconds, it goes to a black screen indefinately until I pull the battery.
Any ideas? I have yet to get a nandroid to work on this device. Had no issues at all on my 3D. I'm sure I'm doing something wrong.
TIA,
Tee Jay
You need to flash the AOSP kernel. Well first can you boot into recovery or download mode
Sent from my SPH-D710 using XDA
g_ding84 said:
You need to flash the AOSP kernel. Well first can you boot into recovery or download mode
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Yeah I can get into recovery fine, so I flashed an AOSP kernel and then my wifi didn't work.
Is it not connecting?
Sent from my SPH-D710 using XDA
g_ding84 said:
Is it not connecting?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Nope, won't even turn on. But if I do a full clean flash of the exact ROM, it works fine.
I'm by far no expert but I'd say the kernel is being replaced by the gb recovery kernel when you flash back for your safe recovery.I personally keep a couple various recoveries so I can nandroid backup on the kernel native to the Rom and then the backup will contain the proper kernel.I think I got that right.so....nandroid b4 recovery has been my habit.
Had this issue before, minus the yellow triangle....anytime you're on an aosp rom and do a nand via el26, the nand stores the last kernel used (which is GB el26). After you restore, wipe cache and dalvik and then flash an aosp kernel, probly one from chris41g. Reboot and should he good to go.
Sent from my SPH-D710 using xda app-developers app
dante32278 said:
Had this issue before, minus the yellow triangle....anytime you're on an aosp rom and do a nand via el26, the nand stores the last kernel used (which is GB el26). After you restore, wipe cache and dalvik and then flash an aosp kernel, probly one from chris41g. Reboot and should he good to go.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Right, I tried that with my AOKP backup, I was able to boot. But then my WiFi wasn't working because of something to do with the Kernel I'm assuming
I rooted my sister's E4GT last year and she's still running Calkulin's E4GT ROM v2.6 and her current kernel is 2.6.35.7-SPH-D710.EL13-CL806482
She's still on Gingerbread, and I want her to enjoy the ICS experience or JB if there's any stable JB ROMs.
My phone is an EVO so I am not comfortable/familiar with the Samsung pitfalls. I don't want to brick my sister's phone.
On my phone I'd download the zip, and in recovery factory reset, wipe data, cache, dalvik, system, and then flash the ROM, but I've read that could lead to a brick on the E4GT.
What's the safest way for me to flash some ICS/JB ROMs for her to try out?
Sent from my EVO
Easily answered by reading a couple posts. Use search.
Odin safe el26 with cwm, calkulin format all x2, flash rom.
Sent from my SPH-D710 using XDA
Bannjio said:
Easily answered by reading a couple posts. Use search.
Odin safe el26 with cwm, calkulin format all x2, flash rom.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Just look at ICS roms and first few post to see how they perform. Flash away.
The safest recovery to use is el 26 cwm
http://chris41g.devphone.org/EpicTouch/Stock Repack/EL26/StockCWM-EL26.tar.md5 For Odin or Mobile Odin if you have that.
You can just flash just about anything once you are in that recovery. The only major difference for you to know is that once you flash the rom, the kernel that is packed into the rom will also change the recovery. Also I do not really think there is a need to use a wipe all zip just unnecessary and usually causes error's when installing certain roms.
Most of the newer rom's do come with a safe recovery, but if you are unsure and have not read much and verified that the included recovery in the rom is safe I would recommend using el26cwm.
You can also use this recovery, this one will boot straight to recovery
http://shabbypenguin.com/k0/ecm/E4GT-EL29-directbootCWM-v3.tar.md5
im0rtalz said:
The safest recovery to use is el 26 cwm
http://chris41g.devphone.org/EpicTouch/Stock Repack/EL26/StockCWM-EL26.tar.md5 For Odin or Mobile Odin if you have that.
You can just flash just about anything once you are in that recovery. The only major difference for you to know is that once you flash the rom, the kernel that is packed into the rom will also change the recovery. Also I do not really think there is a need to use a wipe all zip just unnecessary and usually causes error's when installing certain roms.
Most of the newer rom's do come with a safe recovery, but if you are unsure and have not read much and verified that the included recovery in the rom is safe I would recommend using el26cwm.
You can also use this recovery, this one will boot straight to recovery
http://shabbypenguin.com/k0/ecm/E4GT-EL29-directbootCWM-v3.tar.md5
Click to expand...
Click to collapse
Thank you, Was trying to find the recovery to direct that way first but couldn't find the link ( plus at work so little destracted)
im0rtalz said:
Also I do not really think there is a need to use a wipe all zip just unnecessary and usually causes error's when installing certain roms.
Click to expand...
Click to collapse
Most of the roms I have flashed say to use format all. I always use it and haven't come acrossed any errors. Doesn't mean it is absolutely necessary or will not cause errors though.
Sent from my SPH-D710 using XDA
Thanks everyone for responding. I'm good to go!
Sent from my EVO using xda app-developers app