Develop Bugs

Which wireless N-router connects artemis? Belkin N1 doesnt !

@all,
just havin sold my iphone i am missing synching my mails with my pda over wireless, since my belkin n1 wireless router simply doesnt allow my artemis to connect
so, mind you telling me how you connect successfully?!
- which hardware / wlan access do you use?
greetz

Any wireless router will help you connect with artemis. I have used Dlink, netgear and also linksys routers to connect.
TO connect sucessfully, you need to activate wireless on the router. Then enable wireless in your arte using the comm manager. Once the wireless is activitated, try searching for networks.
Regards,
Kailash

thanx,
but i really aint a novice!
I have tried the belkin n1 now for time and time again...it searches, finds the network, asks for the pin...and returns wireless as unavailable again...
this repeats regardless of security settings or anything else i tried
i remember there having been a lengthy discussion on this...just cant find it..
so back to my question:
which hardware does work?
ideally quote your settings as well, please
greetz

have you checked that both the router and artemis are using the same authentication type? WPA/WEP etc
it might be worth checking that your router isnt set to N-Only for connection speed too....cant remember what speeds the artemis supports but B or G are most likely and maybe your router would reject the connection if it's the wrong type...IIRC the 'N' spec is still in-progress so not widely supported yet

Try a D Link DIR-655
thormdac said:
thanx,
but i really aint a novice!
I have tried the belkin n1 now for time and time again...it searches, finds the network, asks for the pin...and returns wireless as unavailable again...
this repeats regardless of security settings or anything else i tried
i remember there having been a lengthy discussion on this...just cant find it..
so back to my question:
which hardware does work?
ideally quote your settings as well, please
greetz
Click to expand...
Click to collapse
You are not alone!!! I bought a Belkin N1 Vision in December to replace an ageing 3Com router and no matter what I tried I couldn't get my artemis to work. Even without any security. Finally sent the Belkin back and got a D-Link DIR-655. It works like a dream. Connected with no problems at all.

Darn, that confirms what i thought for quite some time - anybody intrested in owning an N1Belkin!
Just doublechecked with an old netgear--and it connects right away...
thanx for ur help!
now could we widen the length of compatible routers, pls.?!
greetz

I use a sitecom 300N router and my artemis connects with it without any problem.
Phill

Netgear
Hi, I use a Netgear WNR834B. No problems using WiFi with Artemis.
Setup; WiFi up to 270 MbPs, region Europe, channel 6 broadcasting and the strongest encryption for security.
With all of the ROMs i have used, there were no WiFi issues.
Regards

This may be stating the obvious, and I apologize if it sounds stupid, but has anyone checked for the "wireless mode" on the router ?
Just ensure the router is on "mixed mode", i.e. it supports b/g/n connections...
Hope this helps...

hmm I also have problems with SMC (SMCWBR14S-N2), mixed mode, but not connect with Artemis.. my notebook connect without any problems.

had the same problem with n1. tried and tried last night with luck, removed all settings on artemis dissapointed. gave it another go this evening after booting system up and connected okay after putting in password.
just double check all the router wireless settings and any security settings you have. save any changes and restart the router.
hope this helps

mjm383 said:
had the same problem with n1. tried and tried last night with luck, removed all settings on artemis dissapointed. gave it another go this evening after booting system up and connected okay after putting in password.
just double check all the router wireless settings and any security settings you have. save any changes and restart the router.
hope this helps
Click to expand...
Click to collapse
Well done getting it to work. I thought I tried everything! Perhaps it was the restart that did it. Too late for me to confirm. My Belkin went back to be replaced with the DLink 655. Good router but does slow down with time and needs a reboot every now and then.

[Q] WiFi problems after Froyo update

After installing the Froyo update yesterday I seem to be having troubles with my WiFi connection. The connection is being dropped after a half an hour or so and I'm unable to reconnect at that time. The Desire just keeps connecting and disconnecting to my network.
I need to reset my router in order to re-establish the connection but it gets dropped again after a half an hour.
I did not experience these problems on the previous version, I did however experience something like it when I connected my PS3 to the router via WiFi in the past. After I done that I wasn't able to connect on my laptop. But I switched to a cable for the PS3 after that anyway.
Is it possible that something on the Desire triggers an overload in the router that causes it to malfunction? I'm unable to connect with my laptop when the connection is dropped on the Desire as well.
It's a Belkin f5d7632-4, which is actually a modem-router, but after disabling the DHCP server it functions fine as a wireless router.
Thank you in advance for any ideas.
If I can't find a solution I think I have to get a new wireless router, I can't go without WiFi on my Desire at home!
If that's the case, advice for a new wireless router is welcome as well. Please post the brand and type and if it's functioning fine with the new Froyo for you.

I have the same issue. I went from standard, unbranded 2.1 to OTA 2.2 like a good citizen, but now it won't connect to my belkin wirless N router, but it DOES connect to my SKY netgear router.
What's the deal?

Yes, I've spotted some more Belkin N1 users on (the dutch website) Tweakers.net with the same problem.
I retain a good connection for about half an hour. They seem to be having the same problem right from the start.

I have a similar problem with a BT HomHub 2.0 but it drops the WiFi randomly however I do not reset the router just turn the WiFi Off and On on the phone and the Desire reconnects. My Desire will also change which SSID its connected too, i.e. from my own SSID to BT Fon or BT Openzone (I have them both turned on in my Home Hub) again to get back to my own SSID I have to stop and restart the WiFi on the phone, simply asking it to move back to my own SSID doesnt work.

Just had a call with HTC Netherlands and they advised me to try it on a different network/router and/or do a factory reset to a clean 2.2.
Has anyone tried the factory reset? I doubt that will do any good. A different router would seem to work according to Jammy1 (and I didn't expect otherwise).
Apparently something killed the compatibility between Belkin routers and Android 2.2 ?!

do you guys have the Bluetooth turned on?I realised when both the Bluetooth and Wi-Fi are on at the same time,the signals tend to clash thereby resulting to connection loss. Though,I experienced this on another android device (a tablet:Archos 5 AIT) especially when a major update occurs.Still waiting for my new Desire.

Random drops also on Linksys WRT54GL with Tomato firmware...

nasimdejai said:
do you guys have the Bluetooth turned on?I realised when both the Bluetooth and Wi-Fi are on at the same time,the signals tend to clash thereby resulting to connection loss. Though,I experienced this on another android device (a tablet:Archos 5 AIT) especially when a major update occurs.Still waiting for my new Desire.
Click to expand...
Click to collapse
No Bluetooth here. Never even used it.

Try turning off the bluetooth.

Bought myself a cheap Sitecom WiFi router and it works like a charm now. But I hope HTC wil fix this and other little bugs present in this version.

I had similar problems after upgrading to Froyo (custom rom) - the Wifi seemed to get connection then as soon as I tried to use it within the browser it dropped and tries to regain IP. After a bit of fiddling with settings I have found that
i) using channel 12 (12 and 13 are only available if router is set to America location) to avoid conflict with heavy wireless coverage in my area seems to help
ii) using WPA2 encryption seems to give a much stabler connection over WPA, although now and again it forgets the passkey data, even re-entering it fails, only solve was to turn wifi off then on for it to reconnect

still having this problem...
does anybody have some news on this ?
I can connect to my home router a linksys wrt600n with WPA2-PSK key but i cant connect to a belkin N1 with WPA2-PSK enabled.
I tried every setting on the belkin router, just cant get it to connet.
My device just keeps connecting and disconnecting, it gets an ip but cant connect...
What i haven't tried is setting a maual ip and see if it connects then.

If i set it to manual ip, it works.
Does anybody have some news on this ?

What channel is your router on? Read somewhere about it not liking anything over 11...

I've been having the same issue on my Desire and on HD2Android.
If a 2.1 ROM is loaded into either of my devices TKIP and AES work perfectly.
With 2.2 it only connects through my Marconi router and doesn't obtain an IP from my Belkin N1.
I don't think this is a device issue but rather a ROM/OS issue. After speaking with some Linux guys they seem to have the opinion that the driver on 2.2 doesn't resolve it's IP address with some routers. Especially higher end ones with added features like QoS ie Belkin/Linksys.

EddyOS said:
What channel is your router on? Read somewhere about it not liking anything over 11...
Click to expand...
Click to collapse
Doesn't make a difference.
I tried everything
Jedit said:
I've been having the same issue on my Desire and on HD2Android.
If a 2.1 ROM is loaded into either of my devices TKIP and AES work perfectly.
With 2.2 it only connects through my Marconi router and doesn't obtain an IP from my Belkin N1.
I don't think this is a device issue but rather a ROM/OS issue. After speaking with some Linux guys they seem to have the opinion that the driver on 2.2 doesn't resolve it's IP address with some routers. Especially higher end ones with added features like QoS ie Belkin/Linksys.
Click to expand...
Click to collapse
Yes that was my initial thought !
But my linksys is newer then my belkin and it has no problems connecting my phone.
The 2 wireless routers are configured the same.
On android 2.1 i had no problems.

is it possible to try and install the 2.1 wifi drivers on 2.2 ?

i had the same problem 2 months ago when i first got my Desire. worked at just about every damn wifi router but the one in my house.
did some reading, no one had an answer. just seemed that it worked on some and not on others. so, i went out to the store and i picked up a Linksys after testing the linksys at the shop. my phone connected and had internet no problem. i thought, perfect, i'll take it.
brought it home, same problem. wifi connects and no internet. no setting would fix it. i brought it back to the store. and sure enough, we plugged that very router into their connection and my phone connected and worked. they obviously would not return the router because it works (and i live in a 3rd world country, forget about it).
so, **** if i could figure it out. i wound up using an older adsl/wifi router i had and no problems. but, i have a new linksys that is just sitting in a box...

its not your router, but the phone.
you can always sell the router on internet or the phone

DaFrenk said:
Just had a call with HTC Netherlands and they advised me to try it on a different network/router and/or do a factory reset to a clean 2.2.
Has anyone tried the factory reset? I doubt that will do any good. A different router would seem to work according to Jammy1 (and I didn't expect otherwise).
Apparently something killed the compatibility between Belkin routers and Android 2.2 ?!
Click to expand...
Click to collapse
I had contact with HTC Scandinavia and they also recommended a factory reset. But these guys haven't got a clue - they didn't even know this was a big problem after the froyo update. Weird when you think about it, I mean wifi is kind of a big thing for a smart phone.
But no, factory reset did NOT change a thing. And replying to other messages: this thing has nothing to do with what router you use. It seems totally random almost.

Bt Home Hub 2 Problems

Hey
I've got some severe wifi problems with the BT infinity Home Hub 2.0:
1. Sometimes I cannot connect to the hub and the phone cannot get passed "obtaining ip address"
2. On rare occasions I can connect to the hub but no data is transferred and to make matters worse it takes down the wifi network for others (Other devices remain connected but no data is transferred) To get things working again I have to reset the hub!
If I try connecting to BT Fon or BT Openzone on my network the same problems occur. (Other BT broadband users will understand what I'm talking about there)
What I've tried to fix the issues:
I've tried setting a manual ip address with no luck
I've tried a full reset of the hub
Changed the wifi channel of the hub
Turned on best performance in wifi settings on the One X
I've tried a variety of roms and am currently on Viper
I experience these issues when connecting to other BT Home Hubs and other random hotspots. But at the same time I have no issues issues connecting to other wifi hotspots such as hotel ones and public hotspots.
At the moment at home I've got an old voyager 2100 bridged to the hub and I can connect through that with no problems, but as you can understand I don't really want two routers running at the same time when it shouldn't be necessary.
If anybody has any suggestions it would be greatly appreciated!
Thanks :cyclops:

Working perfect on my HH2. I say perfect, but as well as the HH2 will work, you'll get what I mean.

blackalice said:
Working perfect on my HH2. I say perfect, but as well as the HH2 will work, you'll get what I mean.
Click to expand...
Click to collapse
Looks like my phone is in need of repairing..

chattyuk said:
Looks like my phone is in need of repairing..
Click to expand...
Click to collapse
Just noticed you have the infinity version, which I assume is totally different.
Sorry about that!
(however, I'm stuck on sub 8mb (2mb, ish) in the country, I'd put up with dodgy wifi for your connection )

blackalice said:
Just noticed you have the infinity version, which I assume is totally different.
Sorry about that!
(however, I'm stuck on sub 8mb (2mb, ish) in the country, I'd put up with dodgy wifi for your connection )
Click to expand...
Click to collapse
It's pretty much identical but I've had the same issues on other normal home hub 2s

I had the same problem whereby every time my One X connected to my Home Hub, it would cause the network to become unresponsive for all connected devices! I eventually found that changing my hub settings from 802.11 b/g/n to just 802.11 b/g did the trick.
Go here: 192.168.1.254
then: Settings --> Advanced Settings --> Wireless --> Wireless interface type.

apwb said:
I had the same problem whereby every time my One X connected to my Home Hub, it would cause the network to become unresponsive for all connected devices! I eventually found that changing my hub settings from 802.11 b/g/n to just 802.11 b/g did the trick.
Go here: 192.168.1.254
then: Settings --> Advanced Settings --> Wireless --> Wireless interface type.
Click to expand...
Click to collapse
Thanks! I'll give this a go when I get home, I wonder what the underlining issue is here that's causing all of these problems

i don't think its the phone, id blame the router, mine does similar sometimes, works after a reboot of the router though

Hi,
I encountered this issue just recently. I have a Galaxy S3 and a HomeHub2 with Infinity. I tried setting a manual IP address, rebooting router and phone, changing wifi channel etc, but none of that worked. I later noticed that the dhcp table on the router was full of expired leases for the same device. I clicked the "refresh" button on the HH2's dhcp page and it refreshed showing a list of different mac address - weird - but this time showng them with an "andriod" prefix. I manually deleted a few of the expired entries - one at a time (pita) and that seemed to fix it, i.e. I was able to reconnect and get an IP address assigned on my S3 again. I've since selected the option to "always use this ip address" on the dhcp table entry details page (just click one of the items in the list to view). I guess there must be a bug/conflict/glitch between andriod and the hh2's dhcp service which perhaps prevents expired ip address assignments from being dropped and reused. I have a few other devices that are wireless and use dhcp (ps3, iphones, ipad, ipod touch, wii, samsung smart tv, wifi printer, microwave, fridge... ok i'm kidding about those last two , and none of those have multiple expired sessions.
Hope this helps someone get round the problem.
Jeremy
PS: Great noob vid.

Funny this is here. I had this exact issue its frikking irritating. I went through the hassle of unlocking the hub to work on talk talk...I had my nexus then and it flew..I know the nexus is like that though lol. So got the x was a nightmare on WiFi.coverage wise also in the kitchen..it went below a bar. So changed to b and g only. Works okay but still is slow ans doesn't do well. Annoying seeing the hub is capable of n
Sent from my HTC One X using xda app-developers app

chattyuk said:
Hey
I've got some severe wifi problems with the BT infinity Home Hub 2.0:
1. Sometimes I cannot connect to the hub and the phone cannot get passed "obtaining ip address"
2. On rare occasions I can connect to the hub but no data is transferred and to make matters worse it takes down the wifi network for others (Other devices remain connected but no data is transferred) To get things working again I have to reset the hub!
If I try connecting to BT Fon or BT Openzone on my network the same problems occur. (Other BT broadband users will understand what I'm talking about there)
What I've tried to fix the issues:
I've tried setting a manual ip address with no luck
I've tried a full reset of the hub
Changed the wifi channel of the hub
Turned on best performance in wifi settings on the One X
I've tried a variety of roms and am currently on Viper
I experience these issues when connecting to other BT Home Hubs and other random hotspots. But at the same time I have no issues issues connecting to other wifi hotspots such as hotel ones and public hotspots.
At the moment at home I've got an old voyager 2100 bridged to the hub and I can connect through that with no problems, but as you can understand I don't really want two routers running at the same time when it shouldn't be necessary.
If anybody has any suggestions it would be greatly appreciated!
Thanks :cyclops:
Click to expand...
Click to collapse
Turn off 802.11n - That is the problem with the Home Hub 2.0. It's buggy as f00k.
Sent from my HTC One X using xda premium

Yeah after I wrote this plugged my old Thomson in..all sweet again now just need a new n router again
Sent from my HTC One X using xda app-developers app

I'm having the exact same problem but with the homehub 3, I was convinced it was a faulty router and have been pestering bt for a new one. I realized it was the phone whenever the same problem happened at the father in laws house (he has a hh3 also). I have been using cyanogenmod for a a few months and this prob only occoured when I started using mike1986's Rom... Maybe someone should tell him

I'm having issues with my One X and my HH3 , it's only started since i went to jellybean. It was fine before now when my HOX is conneced to the router all wireless devices (Ipad and laptops-win7/ubuntu) will drop out and back in of connection. Sometimes the router will drop it's broadband connection then come straight back up.
It's driving me mad.

[Q] One X serious wifi problem

cHi all.
I got my new htc one x week ago. The problem is everytime i connect out home wifi, it works for some tíme and then, after 40minutes approx, wifi goes down and cannot be reconnected not even by computer or other phones. I ides to connect via dads samsung ave and it worked without problems. Is there a way my htc one x could be doping something with router? We also had people here from the providers company and they.changed everything, changed the type of.router, antena etc, yet still after.connecting wifi it only works some tíme. Then blackout. And have to reset whole wifi router...
Thank you for your answers.
Best regards,
Martin

martinko89 said:
cHi all.
I got my new htc one x week ago. The problem is everytime i connect out home wifi, it works for some tíme and then, after 40 minutes approx, wifi goes down and cannot be reconnected not even by computer or other phones. I ides to connect via dads samsung ave and it worked without problems. Is there a way my htc one x could be doping something with router? We also had people here from the providers company and they.changed everything, changed the type of.router, antena etc, yet still after.connecting wifi it only works some tíme. Then blackout. And have to reset whole wifi router...
Thank you for your answers.
Best regards,
Martin
Click to expand...
Click to collapse
Got the same problem with my HOX. I'm using a d-link router DIR-615. For me the only solution was to switch from a/b/g/n to only g (the 2.4Ghz band). When connected to Wifi via N band, I must reset the router frequently. So try to switch your router to G band only (2.4). Many forum talk about this issue but it seems this is more related to Android OS itself. Some user tried other combination like DHCP or Static IP, different security level (wep, wpa, wpa2). Hope this helped! If you find a better solution please tell me, i wish i could use my router in the 5Ghz band.
http://www.geeknewscentral.com/2012/01/03/android-causing-wifi-router-lockups/

Have a look at wifi analyzer app check your not sharing your channel with neighbours try changing channels worked for me
Sent from my HTC One CMX

whynot66 said:
Have a look at wifi analyzer app check your not sharing your channel with neighbours try changing channels worked for me
Sent from my HTC One CMX
Click to expand...
Click to collapse
This is a good idea:good:. find the channel with less trafic with wifi analyser https://play.google.com/store/apps/details?id=com.farproc.wifi.analyzer&feature=nav_result#?t=W251bGwsMSwyLDNd and set your router to that channel.

I had the same problem on a netcomm router. I had to replace my router anyway, so I ended up getting a netgear router and the problem has completely stopped.
It works on both 2.4G & 5G bands without hassle since changing. It also works on my work router which is a linksys.
I think there must be some issues between the HOX and certain brands of routers.

tsqpu said:
I think there must be some issues between the HOX and certain brands of routers.
Click to expand...
Click to collapse
The HOX isnt the only android device to experience this exact same issue (xperia x10,HTC Evo, HOX,Samsung Galaxy Ace GT-S5830, Xoom, Toshiba scribe, droid x) Maybe its related to some android builds or device's radios? Some pple are reporting this on many brands of router(Linksys,d-link, Sagemcom, cisco) but not all model of those brands and some of them reported that different settings resolved this issue (a/b/g/n to only g or b+g, AES to TKIP, wpa/wep or no security...). Its very strange and I hope someday they will find the cause of this HUGE problem. But for now Google and manufaturers are speaking like if this issue doesn't exist.
But i'm sure there is a way to solve this before replacing the router...
http://www.xoomforums.com/forum/motorola-xoom-general-discussion/11891-xoom-causing-linksys-router-crash.html
http://forum.xda-developers.com/showthread.php?t=1053080
http://www.geeknewscentral.com/2012/01/03/android-causing-wifi-router-lockups/
http://www.droidforums.net/forum/droid-x-tech-support/70285-droid-x-wifi-connection-crashing-home-wifi-network-help.html

alray said:
Got the same problem with my HOX. I'm using a d-link router DIR-615. For me the only solution was to switch from a/b/g/n to only g (the 2.4Ghz band). When connected to Wifi via N band, I must reset the router frequently. So try to switch your router to G band only (2.4). Many forum talk about this issue but it seems this is more related to Android OS itself. Some user tried other combination like DHCP or Static IP, different security level (wep, wpa, wpa2). Hope this helped! If you find a better solution please tell me, i wish i could use my router in the 5Ghz band.
http://www.geeknewscentral.com/2012/01/03/android-causing-wifi-router-lockups/
Click to expand...
Click to collapse
when i had weird router problems, basically my hox and only the hox caused the router to stop working completely for every device until rebooted, it even took out the other router that it was connected to.
my fix was changing the band thing as above. just try each setting and test each one

wifi issues

Since I've purchased the note 10 +, I've had some wifi connection issues. The phone never stays connected, or will drop wifi frequently. Normally once a day. Now though, it is much more common, and it is for longer periods of time. I'll be casting something to my tv, and then the video will drop due to the phone trying to "reconnect" to the wifi. Has anyone else seen similar issues?

No issues here with WiFi. Do you have any other devices that exhibit this issue? What have you tried so far in terms of troubleshooting?

I've tried resetting the router, and doing a factory reset on the device. Also, I've tried it on another wifi network and it does it there as well. No other devices that I have on my wifi exhibit the same behaviour. I was hoping with a software update it would get better but it is getting worse.

Do you have a case on your phone?
Any settings made in advanced wifi settings?
Tried app like wifi analizer? Both to check the received wifi strength and also possible wifi congestion...
Are the problems only while casting to TV or also when streaming of Internet?
Did you try change in wifi settings in router, like extended lease time or assigning fixed ip-adresses to both TV and phone, change of wifi channel, switch between 2.4GHz and 5GHz?

OnnoJ said:
Do you have a case on your phone?
Any settings made in advanced wifi settings?
Tried app like wifi analizer? Both to check the received wifi strength and also possible wifi congestion...
Are the problems only while casting to TV or also when streaming of Internet?
Did you try change in wifi settings in router, like extended lease time or assigning fixed ip-adresses to both TV and phone, change of wifi channel, switch between 2.4GHz and 5GHz?
Click to expand...
Click to collapse
The wifi network is fine. Both in signal and congestion. The phone is set to be on the 5 ghz. And I've never had any issues with it on any other device. I lose signal frequently. I only used the casting example to help people understand what's happening.

Now there is a problem with many routers. Even expensive models may not solve the problem with an Internet connection. I also had problems connecting to wi-fi. The phone was disconnected from the router once every few days. I called the guys who connected the Internet to me, but they said that everything was fine on their part. They sent me a master, he looked, but could not do anything except how to change my router. A few days later, I realized that the problem was not solved and started Googling the problem on the Internet. I came across a forum where they advised me to enter this ip 192.168.1.1 and after a couple of manipulations, I was able to fix my problem.

larazimmer said:
Now there is a problem with many routers. Even expensive models may not solve the problem with an Internet connection. I also had problems connecting to wi-fi. The phone was disconnected from the router once every few days. I called the guys who connected the Internet to me, but they said that everything was fine on their part. They sent me a master, he looked, but could not do anything except how to change my router. A few days later, I realized that the problem was not solved and started Googling the problem on the Internet. I came across a forum where they advised me to enter this ip 192.168.1.1 and after a couple of manipulations, I was able to fix my problem.
Click to expand...
Click to collapse
Are you just talking about the programming page of Netgear's routers? Netgear also has apps for that...

larazimmer said:
Now there is a problem with many routers. Even expensive models may not solve the problem with an Internet connection. I also had problems connecting to wi-fi. The phone was disconnected from the router once every few days. I called the guys who connected the Internet to me, but they said that everything was fine on their part. They sent me a master, he looked, but could not do anything except how to change my router. A few days later, I realized that the problem was not solved and started Googling the problem on the Internet. I came across a forum where they advised me to enter this ip 192.168.1.1 and after a couple of manipulations, I was able to fix my problem.
Click to expand...
Click to collapse
How did entering your router's default IP address fix your issue? What changes did you make to your router's configuration?
Just saying that you entered that IP address and making a couple of manipulations doesn't help the OP.