First, if this is the wrong forum for this Q, please forgive me. I've just synced and compiled my first ROM, the cm10 rom that the n7 team has been working on. I'd like to contribute to the working build in my spare time, but have so far not found resources that help with what to do after having built an Android development environment. I'd like to learn how to log errors, address them in any fashion, and maybe to start merging other's fixes. Any help's appreciated. Thanks.
Related
I'm looking for a 2.2 Froyo rom, WITH HTC Sence UI.
pref, 720p recording, newest radio ect..
tried searching through the forum but can't seem to find one i like, most roms have been trimmed down..
couldn't understand the rom kitchen othervise i would compile my own..
any link for this kind of rom or if someone could compile it for me, would be highly aprishiated.
excuse my bad grammar.
Your kidding right?
I'd have a look again if I were you.
Please use search before posting! When you signed up to these forums you agreed to the forum rules, and the number 1 rule is:
1. Search before posting.
Use one of our search functions before posting, whether you have a question or something new to share, it's very likely someone already asked that question or shared that news.
Click to expand...
Click to collapse
Everything you need to know is here, but always search before asking.
Chef Central > Android http://forum.xda-developers.com/forumdisplay.php?f=613
Learn Android ROM development. For serious students only. This forum is monitored and moderated by seasoned developers.
http://forum.xda-developers.com/showthread.php?t=667298
cyanogen said:
Here's my advice for those looking to make their own Android ROMs.. Stop. Write an app or two first, learn how the system works from a developer standpoint. Learn some Java. Read the developer documentation. Learn how to use Git. Then learn how to build AOSP from source. Read the porting guides, and learn how the build system works (the links below have almost everything you could possibly want to know). Now try to put your new found skills to work on enhancing the platform by writing code or making theme overlays. And share! And put that **** on your resume. There is a *ton* of information out there but any kind of "step-by-step rom cooking guide" is going to be a complete fail- it's too broad of a subject.
Android Developer Guides: http://d.android.com
Working with AOSP source: http://source.android.com
Platform Developer Guide: http://pdk.android.com
Android Gitweb: http://android.git.kernel.org
Git Ready (Git tips and tricks): http://www.gitready.com/
Building CyanogenMod: http://wiki.cyanogenmod.com/index.php/Building_from_source
How Dexopt works and what are those odex files: http://android.git.kernel.org/?p=pl...bcd225e47b2cc7abb2a366112d3aeb45936;hb=master
The PDK site is absolutely vital if you are going to work on custom ROMs. Read every single page. Twice. Some of the info isn't up to date, but you'll get a really good idea about what goes into actually configuring Android to work on a real device.
Click to expand...
Click to collapse
Klutsh said:
Your kidding right?
I'd have a look again if I were you.
Click to expand...
Click to collapse
It's quite hilarious now when I read it again. How %&ยค/"# some people can be
Hi all Desirian Guru,
I am not sure this is the right place to bring this stupid question, but if you, the operator, found it is wrong, please move to where it should be. I would like to create or develop, if I can, my own custom ROM for fun and share. Could anyone here kindly point me what steps I should take, what the prerequisites I should have.
Appreciate you guys so much if those tools are supported on my Ubuntu.
and on windows too!
Same sort of thread made before: http://forum.xda-developers.com/showthread.php?t=817699
Might help
Start here, if you are intending to build from the AOSP source:
http://source.android.com/porting/index.html
http://source.android.com/source/git-repo.html
Get the source code from here:
http://android.git.kernel.org/
There is an unofficial "vendor" from devoferreria for the htc bravo board here:
https://github.com/defer/android_device_htc_bravo
The cyanogenmod wiki has a load of excellent info on it, including compiling your kernel:
http://wiki.cyanogenmod.com/index.php?title=Building_Kernel_from_source
If you are looking to mod a SenseUI rom there are guides around here that explain how to change the framework. That is a different art ... use a wider forum search and you should find them.
TheGost1233, stOkes,
thanks for your advise.
You guys rock.
Hey guys!
I just got my serranoltexx and am fairly happy. However, I really would like to try and get AOKP running. Could any devs point me in the direction of where to start, you know, just bootstrap me with some reading? I have a background in Linux and UNIX, have developed some networking stack API projects on windows and have written a ****load of bash, perl etc. scripts in the past. I've also worked on the Matroska container format. Compiling etc. pose no challanges for me. However, I have never fumbled around with Android and I have no idea what drivers and other components might be needed. And how to start finding out what's missing...
I do know how to bootstrap my source repository and sync it... and in theory also how to compile AOKP - for supported devices, that is. What I don't know is: how do I start resolving unmet dependencies, and, you know, generally port a rom to a new device?
Please don't post if you haven't even compiled your own ROM yet. More likely than not, you'd be wasting your time.
I've posted on xda-dev as well, not sure which is the more suitable forum, possibly this one... Link to the other thread:
http://forum.xda-developers.com/showthread.php?t=2501539
And please don't post me to this guide right here as it is only of limited help. As I said, I know how to do it in general... You know, this guide:
http://aokp.co/learn/so-you-want-to-build-aokp-jb-ubuntu-1204
I tried to build it, but many things are missing once i flashed the *.zip.
Maybe i messed up with sources and patches.
Tell us if you have success! :good:
Continuing the discussion from Firefox OS is the way to go!
Hi guys!
I am new to xda-devs, but have been visiting it for useful information in the past.
I own a FP1 (First Edition) and am seeking to port FFOS to the FP1.
I do not have any developing experience, I have just done C and Java and I am comfortable with Linux's CLI.
I am following this guide: Porting Firefox OS
Currently I am stuck at the following: Create a manifest for the new device
[edit]
Which changes do I have to make to the hamachi manifest mentioned there?
I figured out, that most of the stuff is hamachi-specific and thus not required. My current manifest is attached. Could you please take a look and tell me, if this is enough?
These files are at hand:
madde on Fairphone Forum said:
Well there already is a recovery file for the fp1 + fp1u by chrmhoffmann up and running. The MTK6589 source code is kind of released and there has been a lot of work on the android code by the omnirom project, which might come in handy.
Should be definitely manageable to build and try out Firefox OS on the FP1. UnfortunatelyI'll just don't have the time to really dig into that. Maybe someone with a bit more experience can give it a shot. I'd love to see and try out the result...
Click to expand...
Click to collapse
I am inviting @madde-, @_keesj and @chrmhoffmann, I hope you, or others, can help me out.
Thanks in advance, Stefan
PS.: As I am new to xda-devs, I do not know, if my thread is in the right position and/or tagged correctly. Please give some advice on how to improve my original post.
Edit: My current manifest is attached.
I'm very interested by a portage of Firefox OS to the Fairphone
Don't have enought time to test for now, but I stay connected
Newluck77 said:
Continuing the discussion from Firefox OS is the way to go!
Hi guys!
I am new to xda-devs, but have been visiting it for useful information in the past.
I own a FP1 (First Edition) and am seeking to port FFOS to the FP1.
I do not have any developing experience, I have just done C and Java and I am comfortable with Linux's CLI.
I am following this guide: Porting Firefox OS
Currently I am stuck at the following: Create a manifest for the new device
[edit]
Which changes do I have to make to the hamachi manifest mentioned there?
I figured out, that most of the stuff is hamachi-specific and thus not required. My current manifest is attached. Could you please take a look and tell me, if this is enough?
These files are at hand:
I am inviting @madde-, @_keesj and @chrmhoffmann, I hope you, or others, can help me out.
Thanks in advance, Stefan
PS.: As I am new to xda-devs, I do not know, if my thread is in the right position and/or tagged correctly. Please give some advice on how to improve my original post.
Edit: My current manifest is attached.
Click to expand...
Click to collapse
Did you try your file out? I's think it's probably best to cut down on just the relevant settings.
madde- said:
Did you try your file out? I's think it's probably best to cut down on just the relevant settings.
Click to expand...
Click to collapse
Yes, the config.sh got stuck at like 93%.
Also I have no idea, what exactly I have to include into the manifest file. I think I need a toolchain, but I am not sure where to get one, and how to apply it. (I somehow know what it is though, I think... )
Ok, running the config.sh comes at the very end, so I probably should continue with the configuration tree[1]...
Does everything in here [2](@chrmhoffmann's repo android_device_fp_FP1) go to the configuration tree?
[1]: https://developer.mozilla.org/en-US/Firefox_OS/Developing_Firefox_OS/Porting#Create_a_configuration_tree_for_the_new_device
[2]: https://github.com/chrmhoffmann/android_device_fp_FP1
PS.: Sorry, not allowed to post links...
Newluck77 said:
Yes, the config.sh got stuck at like 93%.
Also I have no idea, what exactly I have to include into the manifest file. I think I need a toolchain, but I am not sure where to get one, and how to apply it. (I somehow know what it is though, I think... )
Ok, running the config.sh comes at the very end, so I probably should continue with the configuration tree[1]...
Does everything in here [2](@chrmhoffmann's repo android_device_fp_FP1) go to the configuration tree?
[1]: https://developer.mozilla.org/en-US...reate_a_configuration_tree_for_the_new_device
[2]: https://github.com/chrmhoffmann/android_device_fp_FP1
PS.: Sorry, not allowed to post links...
Click to expand...
Click to collapse
any progress on that? Might be able to help you a little bit in the next few weeks.
Cheers!
madde- said:
any progress on that? Might be able to help you a little bit in the next few weeks.
Cheers!
Click to expand...
Click to collapse
No haven't been able to work on this.
I still have no idea, where and how to build this configuration tree. Do you have advice on this?
Thank you, Stefan
Fyi, a build is now available. As a new user on XDA, I can not post link here (what a ****ty rule), but check bug 1139642 on bugzilla and search Fairphone on the Mozilla Developer Network (MDN) to have more info.
Wrong phone (FP1(U) vs FP2)
The build, you are referring to, is for FP2, not for FP1.
A Firefox OS for FP1 could possibly be built using the source by @chrmhoffmann: http://forum.xda-developers.com/fairphone/orig-development/rom-fairphone-fp1-kitkat-4-4-2-t3243623
Help Needed!
Recently read some tutorials on XDA about setting up a build environment. I've got all that set up, repos synced, correct java version, required packages, device trees, kernel, etc, but I always run into errors while building. The most frustrating thing is that it's always different errors. Everytime I resolve one, a different one occurs. I've been googling for days but it's pretty difficult finding any answers for such specific errors. To clarify, I'm trying to build SlimLP and LiquidSmoothLP for the N7105. My build system is Ubuntu 15.04 x64 bit (Not a VM). At least three times I've started over from scratch (redownloading source, device trees, etc) and it's so time consuming, but I don't wanna give up. So if someone could help me I'd greatly appreciate it.
Editing Post to Show Some Errors I Get
Reserved
Reserved 2