Develop Bugs

help needed ( entering bootloader )

hello all ,
i have a desire hd , with a custom rom installed few days ago ( CM 7.2 ) , and it was all right ...
i decided to give the ics a try , and i chose IceColdSandwich-8.8.AOKP-signed ,
i entered the bootloader , then the recovery as usual , did full wipe , and then chose the rom zip .... then rebooted .... the phone did reboot , but stuck on a black screen ( backlighted ) ....
i pulled the battery out , then tried to enter the recovery but i failed , and the phone stuck on the htc white screen ...
as a try , i used the AAHK to install the included recovery , it succeeded , but i failed again to enter the recovery , and stuck on the same white screen .... then i installed the stock froyo rom via AAHK , during the install process , a white small triangle appeared beside the progress bar , and when it finished installing it rebooted and had the attached black screen with 4 triangles on the corners , when connecting phone to the usb port , it gives a white screen ( attached below )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url][/IMG]
now when connecting phone to pc , nothing happens , not even a connecting notice , and in the AAHK it says that phone is not connected or usb debugging is disabled ( which is true if we supposed that the stock froyo rom was installed properly but not modified yet )
[/url][/IMG]
any help will be appreciated , i am now confused :crying:

so for now i cant access the recovery ( idonno why ) and usb debugging is not enabled .... please help

Try booting your phone to the bootloader and running an RUU.
Use AAHK again after the RUU completes.

if4ct0r said:
Try booting your phone to the bootloader and running an RUU.
Use AAHK again after the RUU completes.
Click to expand...
Click to collapse
thx for your reply friend , but will you be more detailed , considering the fact that i cant access recovery menu , i have only the tow screens displayed in the images attached , the black screen and the white one ..... so , how can i enter the bootloader to run the RUU ?

Pull out the battery. Insert it again.
Boot the phone by pressing and holding the Vol down and Power button, it should boot into the bootloader screen and should say "Fastboot" above a menu of options.
Connect the phone to pc now, it should say Fastboot USB now.
Download an RUU appropriate to your region and carrier. Run the setup from your PC with the phone still connected.
---------- Post added at 12:03 AM ---------- Previous post was at 12:01 AM ----------
Get an RUU from here : http://www.filefactory.com/f/efa28fefafc4af9c/

if4ct0r said:
Pull out the battery. Insert it again.
Boot the phone by pressing and holding the Vol down and Power button, it should boot into the bootloader screen and should say "Fastboot" above a menu of options.
Connect the phone to pc now, it should say Fastboot USB now.
Download an RUU appropriate to your region and carrier. Run the setup from your PC with the phone still connected.
---------- Post added at 12:03 AM ---------- Previous post was at 12:01 AM ----------
Get an RUU from here : http://www.filefactory.com/f/efa28fefafc4af9c/
Click to expand...
Click to collapse
well , the main problem here is being unable to access bootloader menu , i am afraid that something wnet wrong with the volume button ... so as i said , i am stuck in these tow screens attached in the 1st post

T7utmos said:
well , the main problem here is being unable to access bootloader menu , i am afraid that something wnet wrong with the volume button ... so as i said , i am stuck in these tow screens attached in the 1st post
Click to expand...
Click to collapse
Okay. You have adb and fastboot.exe? Try connecting your phone to the PC and after getting it to that white screen, run the command "fastboot devices" from cmd. If your device does get displayed in the list. You can still run an RUU.
However, even if your device does not get displayed on the fastboot devices list, I'd still suggest to connect the phone and run an RUU to see if it recognizes the device.
It's a bad situation to be in with a spoilt volume rocker.. :-\

if4ct0r said:
Okay. You have adb and fastboot.exe? Try connecting your phone to the PC and after getting it to that white screen, run the command "fastboot devices" from cmd. If your device does get displayed in the list. You can still run an RUU.
However, even if your device does not get displayed on the fastboot devices list, I'd still suggest to connect the phone and run an RUU to see if it recognizes the device.
It's a bad situation to be in with a spoilt volume rocker.. :-\
Click to expand...
Click to collapse
thx again dear friend for your answers ,
where can i get the proper fastboot.exe for my dhd ? any link will be appreciated ....
thx in advance

T7utmos said:
thx again dear friend for your answers ,
where can i get the proper fastboot.exe for my dhd ? any link will be appreciated ....
thx in advance
Click to expand...
Click to collapse
Here. I've attached the files needed to run Fastboot. Extract the files to a folder and execute the file name "StartHere.bat" to open a command prompt. You can then use Fastboot commands as mentioned before.
And again, you can find RUUs here.. use a WWE(World Wide Edition) one if you're not sure.
Hope this solves your problem

T7utmos said:
hello all ,
i have a desire hd , with a custom rom installed few days ago ( CM 7.2 ) , and it was all right ...
i decided to give the ics a try , and i chose IceColdSandwich-8.8.AOKP-signed ,
i entered the bootloader , then the recovery as usual , did full wipe , and then chose the rom zip .... then rebooted .... the phone did reboot , but stuck on a black screen ( backlighted ) ....
i pulled the battery out , then tried to enter the recovery but i failed , and the phone stuck on the htc white screen ...
as a try , i used the AAHK to install the included recovery , it succeeded , but i failed again to enter the recovery , and stuck on the same white screen .... then i installed the stock froyo rom via AAHK , during the install process , a white small triangle appeared beside the progress bar , and when it finished installing it rebooted and had the attached black screen with 4 triangles on the corners , when connecting phone to the usb port , it gives a white screen ( attached below )
[/url][/IMG]
now when connecting phone to pc , nothing happens , not even a connecting notice , and in the AAHK it says that phone is not connected or usb debugging is disabled ( which is true if we supposed that the stock froyo rom was installed properly but not modified yet )
[/url][/IMG]
any help will be appreciated , i am now confused :crying:
Click to expand...
Click to collapse
Do you have a PD98IMG file in your sdcard? because that is what the images are showing. AAHK does not flash froyo RUU's so if you flash a Froyo RUU then you did it on your own.
What version of the Hack Kit are you running?

please help
if4ct0r said:
Here. I've attached the files needed to run Fastboot. Extract the files to a folder and execute the file name "StartHere.bat" to open a command prompt. You can then use Fastboot commands as mentioned before.
And again, you can find RUUs here.. use a WWE(World Wide Edition) one if you're not sure.
Hope this solves your problem
Click to expand...
Click to collapse
sorry can you help me I've the same problem. how can I flash the ruu again.

essa3eg said:
sorry can you help me I've the same problem. how can I flash the ruu again.
Click to expand...
Click to collapse
What problem are you expiriencing? how did you end up like that?

glevitan said:
Do you have a PD98IMG file in your sdcard? because that is what the images are showing. AAHK does not flash froyo RUU's so if you flash a Froyo RUU then you did it on your own.
What version of the Hack Kit are you running?
Click to expand...
Click to collapse
i installed the PD98IMG separately and put it in the PD98IMG folder in AAHK tool ..... and installed it maunally on purpose by choosing one of the options in AAHK after failing to enter bootloader
the AAHK version was the last one aahk-12062012

if4ct0r said:
Pull out the battery. Insert it again.
Boot the phone by pressing and holding the Vol down and Power button, it should boot into the bootloader screen and should say "Fastboot" above a menu of options.
Connect the phone to pc now, it should say Fastboot USB now.
Download an RUU appropriate to your region and carrier. Run the setup from your PC with the phone still connected.
---------- Post added at 12:03 AM ---------- Previous post was at 12:01 AM ----------
Get an RUU from here : http://www.filefactory.com/f/efa28fefafc4af9c/
Click to expand...
Click to collapse
thx a lot pal , i will try it today

T7utmos said:
i installed the PD98IMG separately and put it in the PD98IMG folder in AAHK tool ..... and installed it maunally on purpose by choosing one of the options in AAHK after failing to enter bootloader
the AAHK version was the last one aahk-12062012
Click to expand...
Click to collapse
Where did you get the PD98IMG from? the last Hack Kit is 11092012 and not that one. If you flashed a froyo RUU then you need to fix the bootloader first....

Bingoooooooo
if4ct0r said:
Pull out the battery. Insert it again.
Boot the phone by pressing and holding the Vol down and Power button, it should boot into the bootloader screen and should say "Fastboot" above a menu of options.
Connect the phone to pc now, it should say Fastboot USB now.
Download an RUU appropriate to your region and carrier. Run the setup from your PC with the phone still connected.
---------- Post added at 12:03 AM ---------- Previous post was at 12:01 AM ----------
Get an RUU from here : http://www.filefactory.com/f/efa28fefafc4af9c/
Click to expand...
Click to collapse
IT WORKED OUT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :highfive:
thx maaaaaaaaaaaan ... you made my day

[Stuck] in CWM Recovery while rooting

Hi everyone, yes i have a DHD, and i tried to root it with AAHK tool. I know that many have success, but i failed.
Now i got stuck in CWM Recovery and can't get out. Although i tried all the options in the list, but it always returns the CWM screen.
I also tried to install a Rom cook, it said that Success, but then i return again in the CWM screen.
Here it's some pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here it's Hboot menu
This is when i try to run AAHK tool once more.
P/S: i've read the instruction of AAHK tool before action, my phone was pure, S-On, and run Android ver 2.3.5.
P/S 2: i think in the process, my usb cable wasn't properly connected (not my fault, DHD is a old device), cos i heard the sound of something plug in and out my pc many many times

You got obtained S-OFF so you're not stuck.

Muikkuman said:
You got obtained S-OFF so you're not stuck.
Click to expand...
Click to collapse
What does that mean?

Muikkuman said:
You got obtained S-OFF so you're not stuck.
Click to expand...
Click to collapse
What do you mean? I'm stucking there.
I can't get to home screen although i tried many way. Reboot it, flash it, wipe its data, ... It always return in this CWM screen, and i call it Stuck.
Please help

july3rd said:
What do you mean? I'm stucking there.
I can't get to home screen although i tried many way. Reboot it, flash it, wipe its data, ... It always return in this CWM screen, and i call it Stuck.
Please help
Click to expand...
Click to collapse
Is your volume rocker flaw? That seems to be a hardware issue and not software. Maybe it got stuck and that is why it boots to recovery..

glevitan said:
Is your volume rocker flaw? That seems to be a hardware issue and not software. Maybe it got stuck and that is why it boots to recovery..
Click to expand...
Click to collapse
Unfortunately my volume rocker works very well

july3rd said:
Unfortunately my volume rocker works very well
Click to expand...
Click to collapse
That is not unfortunate...have you tried flashing a ruu from fastboot to see what.happens?
Sent from my GT-N7000 using xda app-developers app

glevitan said:
That is not unfortunate...have you tried flashing a ruu from fastboot to see what.happens?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I don't rly know much of rooting a phone, but when i use AAHK tool, it asked me if i want to load some "RUU" file and install it, i said Yes.
If that is not what u're talking, please give some construction.

july3rd said:
I don't rly know much of rooting a phone, but when i use AAHK tool, it asked me if i want to load some "RUU" file and install it, i said Yes.
If that is not what u're talking, please give some construction.
Click to expand...
Click to collapse
Are you able to boot in hboot? You don't need recovery to flash a RUU..paste the information displayed in your hboot here...

Ok, first download the zip I've attached to this post. Extract the contents, run 'Start here.bat'. Now, on your phone, go back to the hboot screen, connect your phone to your computer, and press 'power'. Verify that the phone shows 'FASTBOOT USB' in red. Now go to the cmd window that opened with 'Start here.bat', and type (or copy-paste) from here -
Code:
fastboot flash recovery openrecovery-twrp-2.4.1.0-ace.img
When it finishes and displays a 'success' message, exit cmd, disconnect your phone, use 'volume down' to highlight 'recovery' and press power to select it. Your phone will boot into this new recovery which is called TWRP. TWRP and 4ext are the best recoveries for this device. CWM is outdated, especially the version you're using. Now using this recovery, wipe your device properly by running wiping 'system' and 'factory reset/data' in the wipe menu, and then flash whatever ROM you want. It should work fine.
Note: If it fails, then you've done something and you don't have an S-OFF bootloader anymore. As long as your bootloader has the same top line as in the picture you posted, you're good. If you have run an RUU either on your own or using AAHK, and you have an S-ON bootloader now, connect your phone back in hboot mode, enable 'FASTBOOT USB' and run AAHK again. You'll end up with an S-OFF bootloader, and you can follow the above step.
Also, the sound of your phone disconnecting and connecting repeatedly to your computer was not a problem with the USB cable. It happens everytime AAHK reboots the phone, because the phone disconnects while turning off and connects back when turning on. AAHK failed the second time you ran it because it you already got a fully unlocked S-OFF bootloader in the first try. It only works if the bootloader is locked.

sashank said:
Ok, first download the zip I've attached to this post. Extract the contents, run 'Start here.bat'. Now, on your phone, go back to the hboot screen, connect your phone to your computer, and press 'power'. Verify that the phone shows 'FASTBOOT USB' in red. Now go to the cmd window that opened with 'Start here.bat', and type (or copy-paste) from here -
Code:
fastboot flash recovery openrecovery-twrp-2.4.1.0-ace.img
When it finishes and displays a 'success' message
Click to expand...
Click to collapse
Thank you for your attention, Here it's the result
Btw, each time i load into Hboot, the screen flash into this
and then he goes to the normal Hboot.
Idk if it helps anything, i just give all i got to you.

july3rd said:
Thank you for your attention, Here it's the result
Btw, each time i load into Hboot, the screen flash into this
and then he goes to the normal Hboot.
Idk if it helps anything, i just give all i got to you.
Click to expand...
Click to collapse
you can not use flash commands in fasboot as you don't have ENG S-OFF (do not flash the tradicional but the modified one in the Hack Kit)
Or flash the zip file in fastboot this way:
Boot in fastboot usb (check that in the phone is display that)
Put this zip file somewhere you can find it: https://docs.google.com/file/d/0B2d8xxQzn5owMkpCQlBibkU2amM/edit?usp=sharing.
Open a cmd as admin in the PC
Go to where the recovery zip folder is located (in cmd)
And then type:
Code:
fastboot oem rebootRUU
fastboot flash zip cwm-5.0.2.7-ace.zip (when you get the OKAY in the cmd session you are done)
fastboot reboot-bootloader
When finished, you should have CWM recovery installed

glevitan said:
you can not use flash commands in fasboot as you don't have ENG S-OFF (do not flash the tradicional but the modified one in the Hack Kit)
Click to expand...
Click to collapse
Thank you, all steps has worked, but it seems that nothing has changed. The phone reboot and still stuck at the famous CWM screen.
Btw, i now can't use AAHK tool anymore, it always say that Phone not plugged in, or Driver not installed, or USB debugging not enabled.

glevitan said:
you can not use flash commands in fasboot as you don't have ENG S-OFF (do not flash the tradicional but the modified one in the Hack Kit)
Click to expand...
Click to collapse
Ah, my bad. I completely forgot about that. I've always had ENG S-OFF I'll remember your method. :good:

sashank said:
Ah, my bad. I completely forgot about that. I've always had ENG S-OFF I'll remember your method. :good:
Click to expand...
Click to collapse
Then maybe you have another solution ?
I'm still waiting for you guys :hopefully:

Yeah. If you still have S-OFF, connect your phone in fast boot and run AAHK. Choose the option to flash ENG hboot and flash the 0.85.2425 version. Once it's done, you'll see 'ACE PVT ENG S-OFF' at the top. Now you can do again what I said in the previous post.
Sent from my Desire HD using xda premium

sashank said:
Yeah. If you still have S-OFF, connect your phone in fast boot and run AAHK. Choose the option to flash ENG hboot and flash the 0.85.2425 version. Once it's done, you'll see 'ACE PVT ENG S-OFF' at the top. Now you can do again what I said in the previous post.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
I can't, as i said, the AAHK tool don't recognize my device anymore. I did install the driver. I'll take a screen shot for you later

july3rd said:
I can't, as i said, the AAHK tool don't recognize my device anymore. I did install the driver. I'll take a screen shot for you later
Click to expand...
Click to collapse
Because you are trying to open he Hack Kit normally, but your phone does not boot so adb can't be used. Boot in fastboot usb and then open a cmd as admin and navigate to where the hack kit is located, then type:
Code:
hack-ace.cmd fastboot
That should bring the menu to flash ENG S-OFF...

glevitan said:
Because you are trying to open he Hack Kit normally, but your phone does not boot so adb can't be used. Boot in fastboot usb and then open a cmd as admin and navigate to where the hack kit is located, then type:
Code:
hack-ace.cmd fastboot
That should bring the menu to flash ENG S-OFF...
Click to expand...
Click to collapse
Still can't
I think my phone is missing something...

july3rd said:
Still can't
I think my phone is missing something...
Click to expand...
Click to collapse
ok, do you mind if I have a look to it over teamviewer?

[Q] HTC rebooting by itself.What should i do?

I have a HTC desire HD hboot-2.00.0029, radio 26.14.04.28_M .I installed on it RUU_Ace_Sense30_S_Orange_UK_3.13.61.5_Radio_12.65.60.29_26.14.04.28_M_release_235697_signed .I turn it off and leave it off like 3 weeks. After that when i wanted to turn it on , it starts on a white background with HTC letters and then turn off and start again doing the same thing.
Can somebody help me?Thanks

that's mean boot lop..right..
is the phone still can go to the bootloader...?
if yes...you can try go to bootloader and try select factory reset from there..
anyway..what the detail state of your phone bootloader..?, i mean..is it already unlocked..?, s-off?, or what...?
are you sure... that's the RUU you flashed is the correct that are suitable for your phone..?
hope this help..

JJeamy said:
that's mean boot lop..right..
is the phone still can go to the bootloader...?
if yes...you can try go to bootloader and try select factory reset from there..
anyway..what the detail state of your phone bootloader..?, i mean..is it already unlocked..?, s-off?, or what...?
are you sure... that's the RUU you flashed is the correct that are suitable for your phone..?
hope this help..
Click to expand...
Click to collapse
yes, i tried to do a factory reset..nothing..still rebooting..
nope..it's locked on orange..s-on..but the thing is that i operated on it after i installed that ruu.
i dont know what to do ..

plaYer25 said:
yes, i tried to do a factory reset..nothing..still rebooting..
nope..it's locked on orange..s-on..but the thing is that i operated on it after i installed that ruu.
i dont know what to do ..
Click to expand...
Click to collapse
so you mean that your phone still in stock right..?
while you installing that RUU before..is that already finish..?
did you already tried flashing that RUU again...?, maybe you can try it to flashing it that RUU again but now is tried flashing it from your bootloader..
to do that you must go to bootloader and select FASTBOOT..then connecting it your phone to pc until indicator is FASTBOOT-USB..then try open cmd from your adb / sdk folder..then typing "fastboot oem rebootRUU"..then after that..you can try running again RUU.exe from your computer..and wait until finish..then just tell me if that success booting or not..
hope this help..

JJeamy said:
so you mean that your phone still in stock right..?
while you installing that RUU before..is that already finish..?
did you already tried flashing that RUU again...?, maybe you can try it to flashing it that RUU again but now is tried flashing it from your bootloader..
to do that you must go to bootloader and select FASTBOOT..then connecting it your phone to pc until indicator is FASTBOOT-USB..then try open cmd from your adb / sdk folder..then typing "fastboot oem rebootRUU"..then after that..you can try running again RUU.exe from your computer..and wait until finish..then just tell me if that success booting or not..
hope this help..
Click to expand...
Click to collapse
after i did this command : "fastboot oem rebootRUU" it appers like a menu(see the picture) What should i do?run again that RUU?write a command before i run it?cheers

are you sure you do that command while your phone connected to pc and it's in bootloader FASTBOOT-USB mode..?
and you sure htc driver at your pc correctly detected your phone..?
if so..just try another fastboot command "fastboot getvar all" and just show me the output of this command..

JJeamy said:
are you sure you do that command while your phone connected to pc and it's in bootloader FASTBOOT-USB mode..?
and you sure htc driver at your pc correctly detected your phone..?
if so..just try another fastboot command "fastboot getvar all" and just show me the output of this command..
Click to expand...
Click to collapse
What should i do?you have all details about my phone!!thank you for helping me!!

plaYer25 said:
What should i do?you have all details about my phone!!thank you for helping me!!
Click to expand...
Click to collapse
firstly remove your phone serial number and imei from the attachment picture...avoid someone can cloning your phone...
you can try download this RUU from here..
after that without connecting your phone to pc..firstly you must find the rom.zip file from that RUU.exe..to do that..
just running that RUU.exe until two steps next..then hold there..do not continued and do not closed that..just let it open..then open your explorer..
C:\Users\[your user name]\AppData\Local\Temp\[here you will find a lot folder like this "{5CAD3393-EEC0-44CE-9F93-BCAA365B77FB}"] ..search the latest folder by date..and inside that folder you will find subfolder like that again..open it..here you will see the rom.zip file..just copied the rom.zip file to another location...then after that you can cancel and close it RUU.exe
rename it the rom.zip file to "PD98IMG.zip" then copied to the root directory of your sd card (do not place it in any folder)..you can using card reader to copied that file..
after that...just put it in back your sd card to your phone..then boot up your phone to bootloader..then let the bootloader check it the PD98IMG.zip file..and wait until they ask to updating it..just confirm it with volume up..then wait until finish and ask you to confirm reboot with pressing power button..after that if your phone is already success a booting normal again..you must remove it the PD98IMG.zip file from your sd card..
just let me know if this work or not...
hope this help..

2928249 5959
i cant find any flder with that name

JJeamy said:
firstly remove your phone serial number and imei from the attachment picture...avoid someone can cloning your phone...
you can try download this RUU from here..
after that without connecting your phone to pc..firstly you must find the rom.zip file from that RUU.exe..to do that..
just running that RUU.exe until two steps next..then hold there..do not continued and do not closed that..just let it open..then open your explorer..
C:\Users\[your user name]\AppData\Local\Temp\[here you will find a lot folder like this "{5CAD3393-EEC0-44CE-9F93-BCAA365B77FB}"] ..search the latest folder by date..and inside that folder you will find subfolder like that again..open it..here you will see the rom.zip file..just copied the rom.zip file to another location...then after that you can cancel and close it RUU.exe
rename it the rom.zip file to "PD98IMG.zip" then copied to the root directory of your sd card (do not place it in any folder)..you can using card reader to copied that file..
after that...just put it in back your sd card to your phone..then boot up your phone to bootloader..then let the bootloader check it the PD98IMG.zip file..and wait until they ask to updating it..just confirm it with volume up..then wait until finish and ask you to confirm reboot with pressing power button..after that if your phone is already success a booting normal again..you must remove it the PD98IMG.zip file from your sd card..
just let me know if this work or not...
hope this help..
Click to expand...
Click to collapse
I cant find the root directory in my sdcard...neither the PD98 imagine

JJeamy said:
firstly remove your phone serial number and imei from the attachment picture...avoid someone can cloning your phone...
you can try download this RUU from here..
after that without connecting your phone to pc..firstly you must find the rom.zip file from that RUU.exe..to do that..
just running that RUU.exe until two steps next..then hold there..do not continued and do not closed that..just let it open..then open your explorer..
C:\Users\[your user name]\AppData\Local\Temp\[here you will find a lot folder like this "{5CAD3393-EEC0-44CE-9F93-BCAA365B77FB}"] ..search the latest folder by date..and inside that folder you will find subfolder like that again..open it..here you will see the rom.zip file..just copied the rom.zip file to another location...then after that you can cancel and close it RUU.exe
rename it the rom.zip file to "PD98IMG.zip" then copied to the root directory of your sd card (do not place it in any folder)..you can using card reader to copied that file..
after that...just put it in back your sd card to your phone..then boot up your phone to bootloader..then let the bootloader check it the PD98IMG.zip file..and wait until they ask to updating it..just confirm it with volume up..then wait until finish and ask you to confirm reboot with pressing power button..after that if your phone is already success a booting normal again..you must remove it the PD98IMG.zip file from your sd card..
just let me know if this work or not...
hope this help..
Click to expand...
Click to collapse
i did that..same thing..(..just restarting...

plaYer25 said:
i cant find any flder with that name
Click to expand...
Click to collapse
what windows version you are using..?
plaYer25 said:
I cant find the root directory in my sdcard...neither the PD98 imagine
Click to expand...
Click to collapse
the root directory is mean just place it that file inside your sd card..don't place it that file in any folder "sdcard\[here the root directory]"
plaYer25 said:
i did that..same thing..(..just restarting...
Click to expand...
Click to collapse
can you more cleared and detailed what you mean is..?
did you mean you are already to do all the step i say to flashing it the PD98IMG.zip file through bootloader from the RUU.exe the link that i give it to you above...but the result is still boot loping..?
can you show me detailed of your bootloder correctly..i mean example like this..
***UNLOCKED***
ACE PVT SHIP S-ON RL
HBOOT - X.XX.XXXX
blah blah
blah blah..
because you say before in your first post is that you already had hboot 2.00.0029 version.. but in your attachment picture above is your hboot still 2.00.0027..which are exactly your hboot version is...?
did you already tried unlocking your bootloder via htcdev.com..?, and what exactly your reason to installing that RUU in your first post above..?

JJeamy said:
what windows version you are using..?
the root directory is mean just place it that file inside your sd card..don't place it that file in any folder "sdcard\[here the root directory]"
can you more cleared and detailed what you mean is..?
did you mean you are already to do all the step i say to flashing it the PD98IMG.zip file through bootloader from the RUU.exe the link that i give it to you above...but the result is still boot loping..?
can you show me detailed of your bootloder correctly..i mean example like this..
***UNLOCKED***
ACE PVT SHIP S-ON RL
HBOOT - X.XX.XXXX
blah blah
blah blah..
because you say before in your first post is that you already had hboot 2.00.0029 version.. but in your attachment picture above is your hboot still 2.00.0027..which are exactly your hboot version is...?
did you already tried unlocking your bootloder via htcdev.com..?, and what exactly your reason to installing that RUU in your first post above..?
Click to expand...
Click to collapse
i have finnished all the steps you told me..nothing still booting loop..after i installed that version i tried to update to another RUU(exactly the RUU you told me to download).
now i have RUU ARA:
hboot-2.00.0027
radio: 26.14.04.28_M
i am using win7.after i follow all your steps the phone is still in booting loop..

plaYer25 said:
i have finnished all the steps you told me..nothing still booting loop..after i installed that version i tried to update to another RUU(exactly the RUU you told me to download).
now i have RUU ARA:
hboot-2.00.0027
radio: 26.14.04.28_M
i am using win7.after i follow all your steps the phone is still in booting loop..
Click to expand...
Click to collapse
that's so weird things...
what if you try too installing that RUU.exe like normal way...i mean just connecting your phone with pc (select FASTBOOT mode from your bootloder) then running that RUU.exe until finish..
if that still fail too...then another way is you can try it to unlocking your bootloader via htcdev.com first..then after that you can continued installing custom recovery like 4ext, twrp or cwm..and then installing custom rom..
to unlock your bootloader via htcdev.com...firstly you must update your hboot version to 2.00.0029...that hboot update file is already in there site..just follow instruction from site it self..

JJeamy said:
that's so weird things...
what if you try too installing that RUU.exe like normal way...i mean just connecting your phone with pc (select FASTBOOT mode from your bootloder) then running that RUU.exe until finish..
if that still fail too...then another way is you can try it to unlocking your bootloader via htcdev.com first..then after that you can continued installing custom recovery like 4ext, twrp or cwm..and then installing custom rom..
to unlock your bootloader via htcdev.com...firstly you must update your hboot version to 2.00.0029...that hboot update file is already in there site..just follow instruction from site it self..
Click to expand...
Click to collapse
i have already tried that...i tried for 3-4 times..same results :booting loop.
i will tomorrow that thing with htc..after i unlock it how can i install a recovery?what rom do you advice me to install?and how?thank you..

plaYer25 said:
i have already tried that...i tried for 3-4 times..same results :booting loop.
i will tomorrow that thing with htc..after i unlock it how can i install a recovery?what rom do you advice me to install?and how?thank you..
Click to expand...
Click to collapse
This so weird...because that you told me with these both RUU that you had already installed is all process had success completed until finish....but what i know is...that's impossible the phone while still in stock condition can received two different stock RUU with different cid num too...accept if your already had a goldcard and flashing it just through bootloader..
Anyway...just unlocking that bootloader first then after success unlocking...i will continued told you what step by step you must to do next...
Now i'm gone a sleep..
Sent from my HTCSensation using Tapatalk

JJeamy said:
This so weird...because that you told me with these both RUU that you had already installed is all process had success completed until finish....but what i know is...that's impossible the phone while still in stock condition can received two different stock RUU with different cid num too...accept if your already had a goldcard and flashing it just through bootloader..
Anyway...just unlocking that bootloader first then after success unlocking...i will continued told you what step by step you must to do next...
Now i'm gone a sleep..
Sent from my HTCSensation using Tapatalk
Click to expand...
Click to collapse
i receive this error when i try to unlock bootloader
... INFO[ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s

What the command you type...?
Sent from my HTCSensation using Tapatalk

JJeamy said:
What the command you type...?
Sent from my HTCSensation using Tapatalk
Click to expand...
Click to collapse
fastboot oem get_identifier_token

plaYer25 said:
fastboot oem get_identifier_token
Click to expand...
Click to collapse
Did you already update your hboot to version 2.00.0029 first before running that command..?
if not yet...just download this hboot from here.. then flashing this via bootloader..
to flashing this hboot through bootloader is just the same way as my guide in my #8 post..
Sent from my HTCSensation using Tapatalk

[Q] Can't root my HTC Wildfire

For days now I have been trying to root this HTC Wildfire (NOT Wildfire S) that my dad gave to me (so I take it that this phone is very old), because I need to install Android 2.3 on it to be able to download Skype (the phone is stuck on Android 2.2). However after trying many guides, on this website AND others, I am simply unable to do it, so that is why I am writing this forum post.
This is the HBOOT screen:
(As a new user I can not post any images or links for some reason so I just typed this
*** LOCKED (OOW) ***
BUZZ PVT SHIP S-ON
HBOOT-1.02.0000
MICROP-0622
TOUCH PANEL-ATMEL224_20aa
RADIO-3.35.20.10
Dec 13 2011, 12:08:54
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
I have tried so many different things, especially posts on this website, and have so far been unsuccessful, but that may be mainly because I am new to this type of thing.
Any help is appreciated, it seems to me that there is almost no solution, half the links to files I need for this process has turned out to be so old that it is no longer even there.

NurusS said:
I have tried so many different things, especially posts on this website, and have so far been unsuccessful, but that may be mainly because I am new to this type of thing.
Any help is appreciated, it seems to me that there is almost no solution, half the links to files I need for this process has turned out to be so old that it is no longer even there.
Click to expand...
Click to collapse
Hi there, welcome to the forum
Have you tried using my guide to root hboot 1.02.0000? What have you tried already? (Links please ) also what are you getting stuck on/at?
lastly what version of windows are you on?
Sent from my Desire S using Tapatalk

heavy_metal_man said:
Hi there, welcome to the forum
Have you tried using my guide to root hboot 1.02.0000? What have you tried already? (Links please ) also what are you getting stuck on/at?
lastly what version of windows are you on?
Sent from my Desire S using Tapatalk
Click to expand...
Click to collapse
Yes, I have. I spent a lot of time trying to use your method but it simply didn't work
http://forum.xda-developers.com/showthread.php?t=2262345 I take it you mean this post?
I have problems at step 3. When I use the htcdev instructions, when I'm on the RUU it says ERROR[191]: ROM IS NOT SUPPORTED
And after that there is nothing that I can do to continue with your instructions. I am on Windows 8.

NurusS said:
Yes, I have. I spent a lot of time trying to use your method but it simply didn't work
http://forum.xda-developers.com/showthread.php?t=2262345 I take it you mean this post?
I have problems at step 3. When I use the htcdev instructions, when I'm on the RUU it says ERROR[191]: ROM IS NOT SUPPORTED
And after that there is nothing that I can do to continue with your instructions. I am on Windows 8.
Click to expand...
Click to collapse
Okay, windows 8 can have some issues with android development but we "should" ( ) be able to get around them.
to your main issue you do not need to flash the ruu, as you already have the upgraded hboot, so skip that part and move onto getting your unlock token via fastboot.( should it say that you need to download the ruu just to move the web page along then do so, but you dont need that file.) View here for a how to on getting fastboot set up with windows 8 and view here for commonly ran into issues with windows 8. Should you get stuck or need more advice just ask pal

heavy_metal_man said:
Okay, windows 8 can have some issues with android development but we "should" ( ) be able to get around them.
to your main issue you do not need to flash the ruu, as you already have the upgraded hboot, so skip that part and move onto getting your unlock token via fastboot.( should it say that you need to download the ruu just to move the web page along then do so, but you dont need that file.) View here for a how to on getting fastboot set up with windows 8 and view here for commonly ran into issues with windows 8. Should you get stuck or need more advice just ask pal
Click to expand...
Click to collapse
Are you sure? it says S-ON, LOCKED and I'm not sure what you mean by the adb folder (where we put the BUZZ-recovery file), but it seems to work where I put it and is stuck forever at < waiting for device >
What is the problem here?

NurusS said:
Are you sure? it says S-ON, LOCKED and I'm not sure what you mean by the adb folder (where we put the BUZZ-recovery file), but it seems to work where I put it and is stuck forever at < waiting for device >
What is the problem here?
Click to expand...
Click to collapse
Yeah im positive pal. the old hboot never used to say locked. if its sits at waiting for device it means that the device is not connected okay. can you run the command
Code:
adb devices
for me and see if it detects the phone.
Do you have usb debugging enabled?
Did you download the zip file from the forum page?

heavy_metal_man said:
Yeah im positive pal. the old hboot never used to say locked. if its sits at waiting for device it means that the device is not connected okay. can you run the command
Code:
adb devices
for me and see if it detects the phone.
Do you have usb debugging enabled?
Did you download the zip file from the forum page?
Click to expand...
Click to collapse
I ran the command an got this back:
C:\Users\Nurus>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
SH14RPY08821 device
I have USB debugging enabled on my phone.
What zip files are you referring to?

NurusS said:
I ran the command an got this back:
C:\Users\Nurus>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
SH14RPY08821 device
I have USB debugging enabled on my phone.
What zip files are you referring to?
Click to expand...
Click to collapse
Sorry for my delay pal, you seem to have download the correct zip file from the op. Try these commands
Adb reboot bootloader
(The device should reboot into fastboot, highlighted in red at the top, Followed by.)
fastboot oem get_identifier_token
Then highlight the code using right click/mark/ then select it all and right click it again. Post that into the htcdev website.
Sent from my nexus 7 using Tapatalk

heavy_metal_man said:
Sorry for my delay pal, you seem to have download the correct zip file from the op. Try these commands
Adb reboot bootloader
(The device should reboot into fastboot, highlighted in red at the top, Followed by.)
fastboot oem get_identifier_token
Then highlight the code using right click/mark/ then select it all and right click it again. Post that into the htcdev website.
Sent from my nexus 7 using Tapatalk
Click to expand...
Click to collapse
I did what you said, I got <waiting for device> again.

NurusS said:
I did what you said, I got again.
Click to expand...
Click to collapse
When the command prompt states waiting for the device,and you have booted into hboot using the command fastboot reboot boot loader, does the phone say fastboot in red at the top, with options like fastboot reboot and other options in red? Or is it the standard black/blue writing? If its not all red then with the fastboot option highlighted press power once. I will upload pictures of what o mean as soon as I get to my laptop.

heavy_metal_man said:
When the command prompt states waiting for the device,and you have booted into hboot using the command fastboot reboot boot loader, does the phone say fastboot in red at the top, with options like fastboot reboot and other options in red? Or is it the standard black/blue writing? If its not all red then with the fastboot option highlighted press power once. I will upload pictures of what o mean as soon as I get to my laptop.
Click to expand...
Click to collapse
Fastboot is highlighted in red.

NurusS said:
Fastboot is highlighted in red.
Click to expand...
Click to collapse
Sorry for my very delayed response pal, life got in the way.
ok so your hboot looks like this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yeah like this except yours will say locked and not unlocked at this stage.
So from here open your command prompt from within the adb folder
Then enter this command, copy and pastif prefered.
Code:
fastboot oem get_identifier_token
this should return a large code in the command prompt.
You will then need to Rght click, mark, and then highlight all the code like the htcdev website states.
post that info into the website and they will email you your unlock token.bin
post back on how you get on.

heavy_metal_man said:
Sorry for my very delayed response pal, life got in the way.
ok so your hboot looks like this?
yeah like this except yours will say locked and not unlocked at this stage.
So from here open your command prompt from within the adb folder
Then enter this command, copy and pastif prefered.
Code:
fastboot oem get_identifier_token
this should return a large code in the command prompt.
You will then need to Rght click, mark, and then highlight all the code like the htcdev website states.
post that info into the website and they will email you your unlock token.bin
post back on how you get on.
Click to expand...
Click to collapse
Once again, I just get <waiting for device>

NurusS said:
Once again, I just get <waiting for device>
Click to expand...
Click to collapse
Okay, then your issue is with your fastboot driver. Do you have another computer you can use?

Just install android SDK and jdk and then try to install your drivers as heavy metal man said. I hope this could work..or try to use this
http://forum.xda-developers.com/showthread.php?t=2317790
Sent from my Moto G using XDA Free mobile app

Unrooting International One M8

Hi.
I've got an HTC One M8 and would like to get everything back to stock, but have been experiencing a bunch of issues.
The phone was stolen a couple weeks ago and I got it back yesterday. The person installed Android 6.0.1, ClockworkMod 6.0.4.8, Turbo, Viper and I've found a com.cyanogenmod.eleven folder on the SD card (not sure what it is though). I've tried doing everything by following "How to Unroot the HTC One M8 Complete Guide" by the Unlockr on Youtube (can't post a link since I'm new) , but I've been running into problems.
I can't connect the phone to a PC. I've checked Device Manager - it recognizes the phone as an Android Phone and it seems to think that it's a CD ROM.
My version-main is blank, and my cidnum is 02___102.
I've managed to get to Recovery but I get "md5 missmatch" every time i try to run it. There isn't a nandroid.md5 file in any of the backup folders.
Could someone please help me get my phone back to an out of the box state? I'm not a pro, but I'll be able to follow instructions.
Thanks.

Easiest way would be a RUU. Just find one that matches your Cid and you're good to go
Skickat från min HTC One M9 via Tapatalk

Roobwz said:
Easiest way would be a RUU. Just find one that matches your Cid and you're good to go
Skickat från min HTC One M9 via Tapatalk
Click to expand...
Click to collapse
Thanks dude, but could you elaborate a bit?
I found a collection of M7 RUUs but can't seem to find them for M8. What does the process look like, as in what should I do after I find the correct RUU?

milun said:
Thanks dude, but could you elaborate a bit?
I found a collection of M7 RUUs but can't seem to find them for M8. What does the process look like, as in what should I do after I find the correct RUU?
Click to expand...
Click to collapse
I don't have the time right now, but I'm sure that there's many guides in the general forums about how you can return 100%to stock
Skickat från min HTC One M9 via Tapatalk

Roobwz said:
I don't have the time right now, but I'm sure that there's many guides in the general forums about how you can return 100%to stock
Skickat från min HTC One M9 via Tapatalk
Click to expand...
Click to collapse
Like I said, it's not the guide I'm worried about, it's the issues I've been running into. Writing 10 sentences doesn't really require that much time if you know what you're writing about.
Thanks man, you've really helped me out.

milun said:
Could someone please help me get my phone back to an out of the box state? I'm not a pro, but I'll be able to follow instructions.
Thanks.
Click to expand...
Click to collapse
Can you get to the bootloader ?
If possible, post here fastboot getvar all result without serial & imei no.
Need to confirm your current firmware version base on these getvar details because your version-main is blank before we can advise whether to use RUU or non-rooted stock nandroid backup to restore

ckpv5 said:
Can you get to the bootloader ?
If possible, post here fastboot getvar all result without serial & imei no.
Need to confirm your current firmware version base on these getvar details because your version-main is blank before we can advise whether to use RUU or non-rooted stock nandroid backup to restore
Click to expand...
Click to collapse
Here's the getvar image I got when I tried to unroot the phone a couple days ago. If it's missing anything important I'll do it again. And yes, I can get into bootloader and recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

milun said:
Here's the getvar image I got when I tried to unroot the phone a couple days ago. If it's missing anything important I'll do it again. And yes, I can get into bootloader and recovery.
View attachment 3766822
Click to expand...
Click to collapse
Yes, please do it again as the important info i.e. hboot & baseband are missing

ckpv5 said:
Yes, please do it again as the important info i.e. hboot & baseband are missing
Click to expand...
Click to collapse
Here it is.

milun said:
Here it is.
View attachment 3766842
Click to expand...
Click to collapse
Great.. your firmware is 4.20.206.1
I'll give you link to RUU in half an hour when I'm home.
Meantime you may want a different method, restore non-rooted nandroid backup and its stock recovery then do OTA. You can read my thread linked in my signature.

ckpv5 said:
Great.. your firmware is 4.20.206.1
I'll give you link to RUU in half an hour when I'm home.
Meantime you may want a different method, restore non-rooted nandroid backup and its stock recovery then do OTA. You can read my thread linked in my signature.
Click to expand...
Click to collapse
Thank you!
I read your post earlier, but since I'm a noob I couldn't figure it out. So I'll wait for the RUU if that's ok with you.

milun said:
Thank you!
I read your post earlier, but since I'm a noob I couldn't figure it out. So I'll wait for the RUU if that's ok with you.
Click to expand...
Click to collapse
Here is the 4.20.206.1 RUU.exe : https://www.androidfilehost.com/?fid=95916177934555499
and you need PC with USB2.0 (don't use USB3.0 or any USB hub) and the latest HTC USB drivers -
http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
As your device is S-On, you need to relock the bootloader.
Put your device on bootloader/fastboot mode and connect to PC.
Open a command prompt from your fastboot/adb folder, run these commands to relock bootloader
fastboot oem lock
fastboot reboot-bootloader
right click the RUU.exe and select run as administrator, follow the instructions accept, next, next, update & blalblabla until it finish.
Lates you can check for OTA and update the device to the latest Marshmallow. I believe there will be two OTAs.
Note : this procedure will wipes everything on your device and give you out of the box state phone.

ckpv5 said:
Here is the 4.20.206.1 RUU.exe : https://www.androidfilehost.com/?fid=95916177934555499
and you need PC with USB2.0 (don't use USB3.0 or any USB hub) and the latest HTC USB drivers -
http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
As your device is S-On, you need to relock the bootloader.
Put your device on bootloader/fastboot mode and connect to PC.
Open a command prompt from your fastboot/adb folder, run these commands to relock bootloader
fastboot oem lock
fastboot reboot-bootloader
right click the RUU.exe and select run as administrator, follow the instructions accept, next, next, update & blalblabla until it finish.
Lates you can check for OTA and update the device to the latest Marshmallow. I believe there will be two OTAs.
Note : this procedure will wipes everything on your device and give you out of the box state phone.
Click to expand...
Click to collapse
Ok, so here's a bunch of questions. Bear with me, please
1. The RUU link takes me to a blank page, I guess it's down or something.
2. When I run the adb installer and choose to install the drivers it asks me if I want to install Samsung drivers. Is that how it's supposed to be?
3. Is it necessary to uninstall HTC Sync Manager? If so, how do I leave the drivers?
4. Do I need to put the RUU in a specific folder or can I run it from wherever I downloaded it?

milun said:
Ok, so here's a bunch of questions. Bear with me, please
1. The RUU link takes me to a blank page, I guess it's down or something.
2. When I run the adb installer and choose to install the drivers it asks me if I want to install Samsung drivers. Is that how it's supposed to be?
3. Is it necessary to uninstall HTC Sync Manager? If so, how do I leave the drivers?
4. Do I need to put the RUU in a specific folder or can I run it from wherever I downloaded it?
Click to expand...
Click to collapse
1. Link is ok for me ...
View attachment 3766907
2. Choose Y to install it system-wide but N for the drivers. You can open command prompt anywhere that you like even from desktop, the adb/fastboot work.
3. Yes, uninstall HTC Sync Manager, the installer will install Htc Sync Manager, USB Drivers and some microsoft needed runtime (separately). When you uninstall HTC Sync Manager, it will uninstall HTC Sync Manager only.
4. Anywhere that you like ... put on desktop for easy access.

ckpv5 said:
1. Link is ok for me ...
View attachment 3766907
2. Choose Y to install it system-wide but N for the drivers. You can open command prompt anywhere that you like even from desktop, the adb/fastboot work.
3. Yes, uninstall HTC Sync Manager, the installer will install Htc Sync Manager, USB Drivers and some microsoft needed runtime (separately). When you install HTC Sync Manager, it will uninstall HTC Sync Manager only.
4. Anywhere that you like ... put on desktop for easy access.
Click to expand...
Click to collapse
Awesome.
I'll try to get the link to open and I'll let you know how everything went when it's done.
Thanks dude.

ckpv5 said:
Here is the 4.20.206.1 RUU.exe : https://www.androidfilehost.com/?fid=95916177934555499
and you need PC with USB2.0 (don't use USB3.0 or any USB hub) and the latest HTC USB drivers -
http://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
As your device is S-On, you need to relock the bootloader.
Put your device on bootloader/fastboot mode and connect to PC.
Open a command prompt from your fastboot/adb folder, run these commands to relock bootloader
fastboot oem lock
fastboot reboot-bootloader
right click the RUU.exe and select run as administrator, follow the instructions accept, next, next, update & blalblabla until it finish.
Lates you can check for OTA and update the device to the latest Marshmallow. I believe there will be two OTAs.
Note : this procedure will wipes everything on your device and give you out of the box state phone.
Click to expand...
Click to collapse
So, I finally got the link to work and got everything set up, but I noticed that there's an O2 in the name of the RUU. I believe O2 is a carrier and my phone had no carrier when I bought it, I just wanted to check if that could be an issue before I do anything.

milun said:
So, I finally got the link to work and got everything set up, but I noticed that there's an O2 in the name of the RUU. I believe O2 is a carrier and my phone had no carrier when I bought it, I just wanted to check if that could be an issue before I do anything.
Click to expand...
Click to collapse
You wrote on your post #1 "My version-main is blank, and my cidnum is 02___102" and your getvar all show cidnum O2__102 ... that means your device is an O2 variant.
I believe it is SIM unlocked, so you can use any SIM on it. Being an O2 device, you can only run O2 RUU and installing RUU won't relock the SIM unlock.

ckpv5 said:
You wrote on your post #1 "My version-main is blank, and my cidnum is 02___102" and your getvar all show cidnum O2__102 ... that means your device is an O2 variant.
I believe it is SIM unlocked, so you can use any SIM on it. Being an O2 device, you can only run O2 RUU and installing RUU won't relock the SIM unlock.
Click to expand...
Click to collapse
Aaaah, ****... The more you know, I guess
Thanks

ckpv5 said:
You wrote on your post #1 "My version-main is blank, and my cidnum is 02___102" and your getvar all show cidnum O2__102 ... that means your device is an O2 variant.
I believe it is SIM unlocked, so you can use any SIM on it. Being an O2 device, you can only run O2 RUU and installing RUU won't relock the SIM unlock.
Click to expand...
Click to collapse
I followed the steps you provided and the phone is back to its original state. Words can't express how grateful I am.
I'll make sure to donate when I get some extra cash, and if there's anything else I can do for you do tell. Thank you for bearing with a noob like me!
Milan

milun said:
I followed the steps you provided and the phone is back to its original state. Words can't express how grateful I am.
I'll make sure to donate when I get some extra cash, and if there's anything else I can do for you do tell. Thank you for bearing with a noob like me!
Milan
Click to expand...
Click to collapse
Great to know that you solved your problem :good:
No worry about donation, it is not needed .. to see a happy note from someone when he solved his problem, that's my satisfaction