Ballistic Shell Gel users? - Galaxy S III Accessories

Hiya! I'm thinking about getting the Ballistic Shell Gel case, but basically no one has it (everyone flocks to the MAXX case, but I'm not taking the phone to Mt. Everest).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Things I'm concerned about:
1) Can you hit the home button/capacitive-buttons/letters-near-he-edge-of-the-screen easily? It looks close and they didn't make a cutout for the home button like in other cases.
2) Does it attract lint? A black Seidio Active looked gray on a YouTube vid because of all the lint.
Or any recommendations for a case that is not slippery, easy to hit buttons (point #1 and "satisfying" click for volume/power), and doesn't attract lint, while also giving a good amount of protection?

I have a knock off and it's great paid $14

Hmm looks like the same case as this one for $9.00 http://www.amazon.com/CrazyOnDigita...k-Black/dp/tech-data/B00805SDO2/ref=de_a_smtd there's a purple version of this on Amazon as well. I bought a different version for my phone though, http://www.amazon.com/CrazyOnDigita...1&sr=8-3&keywords=crazy+on+digital+armor+case the volume and power buttons are very easy to press but at the same time recessed enough where they won't be accidentally pressed. The hard plastic "cage" is a bit slippery, I've been thinking of taking so sandpaper to it to roughen it up a bit, the rubber part does attract a bit of debris but nothing major. Hope that helps.

I have the SG MAXX but it is essentially the same casebother than the screen protector and holster. The buttons are a bit close to the side but after a little you will get used to it. All other buttons are extremely easy to hit and the corners just look rugged as hell. Its a great case. Dont think you'll be disappointed.

Awesome! Thanks, guys. I was about to purchase one of the CrazyOn cases (the first one you linked) and then I read the stock USB charger didn't fit and that kind of turned me off generic cases. And I couldn't find their website for those cases, either, making it a little more weird.
But, good to know even the knock-off are durable.
@gaary
Oh, OK, thanks. I didn't know they were that similar. Very happy to hear about the buttons, I was getting worried. Sounds like my kind of case if it looks"rugged as hell." Do you know anything about lint sticking on the case?

ikjadoon said:
Awesome! Thanks, guys. I was about to purchase one of the CrazyOn cases (the first one you linked) and then I read the stock USB charger didn't fit and that kind of turned me off generic cases. And I couldn't find their website for those cases, either, making it a little more weird.
But, good to know even the knock-off are durable.
@gaary
Oh, OK, thanks. I didn't know they were that similar. Very happy to hear about the buttons, I was getting worried. Sounds like my kind of case if it looks"rugged as hell." Do you know anything about lint sticking on the case?
Click to expand...
Click to collapse
The cut out for the usb is large, absolutely no issues plugging in the usb.
EDIT: Sorry, the USB cut out on my armor case is large, don't know about the Explorer case.

ikjadoon said:
Awesome! Thanks, guys. I was about to purchase one of the CrazyOn cases (the first one you linked) and then I read the stock USB charger didn't fit and that kind of turned me off generic cases. And I couldn't find their website for those cases, either, making it a little more weird.
But, good to know even the knock-off are durable.
@gaary
Oh, OK, thanks. I didn't know they were that similar. Very happy to hear about the buttons, I was getting worried. Sounds like my kind of case if it looks"rugged as hell." Do you know anything about lint sticking on the case?
Click to expand...
Click to collapse
You're always going to have lint problems with silicone, but I would say the lint stickage on this case is minimal, compared with some other cases I've had in the past that were lint supermagnets. One thing that I don't like is the screen protector, but since you're getting the SG, I think you'll be fine. Just compare the case with the Otterbox Commuter and you'll see that the Ballistic looks like it will take a fall better no matter where it lands, especially on the "Ballistic Corners."

When i first installed the case it bubbled up the edge of of my zagg hd screen protector. It does attract a little dust but is an easy clean. I dropped my S3 4 feet onto solid concrete (Sporting Kansas City match) and it landed on the corner bumper. Not a scratch. I am thoroughly satisfied with mine.
Sent from my SGH-T999 using xda app-developers app

I have a sg case and a sg maxx.... They are basically the same minus sp and holster as someone else stated. However the sg silicone is a little more flimsy than the silicon on the maxx.... It also fits in the holster that comes with the maxx but has a little play.... But I rocked it that way today and it seems to hold it well enough. The polycarbonate shell is exactly the same on both models.... It's only the silicone that differs some.
Sent str8 from my half eaten Banilla Ice Cream Samich

jasondhsd said:
Hmm looks like the same case as this one for $9.00 http://www.amazon.com/CrazyOnDigita...k-Black/dp/tech-data/B00805SDO2/ref=de_a_smtd there's a purple version of this on Amazon as well. I bought a different version for my phone though, http://www.amazon.com/CrazyOnDigita...1&sr=8-3&keywords=crazy+on+digital+armor+case the volume and power buttons are very easy to press but at the same time recessed enough where they won't be accidentally pressed. The hard plastic "cage" is a bit slippery, I've been thinking of taking so sandpaper to it to roughen it up a bit, the rubber part does attract a bit of debris but nothing major. Hope that helps.
Click to expand...
Click to collapse
I have this and it's great not perfect but I don't mind I too cut the usb port

XXZJ said:
I have a sg case
Click to expand...
Click to collapse
This post is probably the most informative one in this thread. No need to reply further, I think all is answered with this thought invoking response.

gaarry said:
This post is probably the most informative one in this thread. No need to reply further, I think all is answered with this thought invoking response.
Click to expand...
Click to collapse
Haha you're right.... Eye opening.
Sent str8 from my half eaten Banilla Ice Cream Samich

i have normal SG case, and am loving it. fits very well, and seems very protective. not too bad as far as lint goes. the capacitive buttons are no problem to access and the physical buttons that are covered by the silicon are very responsive.
only one minor nitpick-- i was using a wet-apply screen protector and after a few days the case started pulling the corners up. i hope to solve this with an sgp ultra nano which should arrive shortly
all in all it's a great case. it provides excellent protection and is extremely high quality. the one caveat (and this is common to such cases) is that you'll want a dry application screen protector, if you choose to use one.

gaarry said:
This post is probably the most informative one in this thread. No need to reply further, I think all is answered with this thought invoking response.
Click to expand...
Click to collapse
Well, he was the deciding factor.
Just placed an order for the Shell Gel. These forums rock; with 10 million people with this phone, we are going to have a ripe little community.
Thanks for the lint info. I got blue because hopefully lint won't show up as readily, I like blue, it goes better with white, and I can pretend to be a UK fan, haha.

I played with the SG at Sam's Club and thought the quality of it was terrible. It didn't have clean edges on the silicon and for some reason, the hard shell stopped before the power button.

zagtastic said:
i have normal SG case, and am loving it. fits very well, and seems very protective. not too bad as far as lint goes. the capacitive buttons are no problem to access and the physical buttons that are covered by the silicon are very responsive.
only one minor nitpick-- i was using a wet-apply screen protector and after a few days the case started pulling the corners up. i hope to solve this with an sgp ultra nano which should arrive shortly
all in all it's a great case. it provides excellent protection and is extremely high quality. the one caveat (and this is common to such cases) is that you'll want a dry application screen protector, if you choose to use one.
Click to expand...
Click to collapse
You shouldn't have a problem with the sgp ultra nano, I'm using this setup and no pulling up at corners for me.
artman540 said:
I played with the SG at Sam's Club and thought the quality of it was terrible. It didn't have clean edges on the silicon and for some reason, the hard shell stopped before the power button.
Click to expand...
Click to collapse
The hard shell doesn't cover power button so that the case is easily removed.
Sent str8 from my half eaten Banilla Ice Cream Samich

was about to order a trident kraken then i saw this:laugh:

Related

T-Mobile gel skin (Black) w/ Realook screen protector (updated pictures 8/6)

UPDATE: hey guys updated my post with better pictures (with the realook screen protector on) I've dropped my phone once from my pocket (about 3 ft) to the pavement and it didnt have one single bump or scratch on it! everything still looked new and even the gel case!
Hey guys I just purchased the black T-Mobile gel skin for $10 (discount from friend) which originally sells for $16.99 and I am loving it! I've had so many smartphones in the past and would always use a hard shell case because I hated the gel skin so much! My friend used a gel skin on her mytouch and after a couple of weeks it became so loose it would slip right out. The material was very thin and it stretched out not fitting the phone anymore. This particular gel skin is really thick and durable! It feels great holding it and has a good grip.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is how much space there is when you slide in the phone to the top. this for sure shows that it is a good firm fit and will never fall out or get loose at all.
There are no cut outs for the power button and volume rocker because the skin has its own buttons for those and they actually feel better than the phones! its easier shutting off your screen and adjusting the volume.
as for the realook screen protector it is reallllly nice. wasnt too hard to put on and plus if you do mess up you can wash it and reapply again. screen still looks the same with it on and my gf didnt even notice it haha she thought i was lying! anyways i love this combo that i have right now and wont have to buy any accessories for a really long time.
Back to the Future FTW!
I think that's because (maybe) Samsung makes these? They look awfully similar in design to the other cases they have the Samsung Store.
I'm getting this one tomorrow as I wait for my mesh case.
heygrl said:
I think that's because (maybe) Samsung makes these? They look awfully similar in design to the other cases they have the Samsung Store.
I'm getting this one tomorrow as I wait for my mesh case.
Click to expand...
Click to collapse
It's a T-Mobile branded case, but I'm not sure if Samsung designed the cases for them? i could be wrong.
the gel cases from the Samsung website has a bigger cut out for the speaker than T-Mobile's version.
yep, i have it. we have very few options for cases right now, so i went with this. I like it for a gel case, but when a few more come out i may switch to a harder case. we will see, but for now its good
aeson said:
It's a T-Mobile branded case, but I'm not sure if Samsung designed the cases for them? i could be wrong.
http://img808.imageshack.us/img808/8540/snapshot2010072914.jpg
the gel cases from the Samsung website has a bigger cut out for the speaker than T-Mobile's version.
Click to expand...
Click to collapse
That's actually the Samsung case for the Captivate. Here's the one for the Vibrant.
Maverick777 said:
That's actually the Samsung case for the Captivate. Here's the one for the Vibrant.
Click to expand...
Click to collapse
Oh sorry didn't notice i chose the captivate haha thanks for the correction Maverick.
I'll see how well this goes for now and will probably get a hard shell case too only if this stretches out more in the future, but I'm happy with what i got.
I had the case when it came out and I think the quality of the case and protection is awesome BUT the Gel material picks up dust very easily. There are other Gel type cases that do not do this so if it's not a problem for you then this is an excellent case for you.
This is what I am stuck with for now. Six Tmo stores have been out of stock on the black gel case since the 19th, yesterday they all got 3 teal ones in stock so I bit the bullet and bought it because I need it. When the black ones come in I will exchange for it. Overall I love the feel of it and for some reason it makes the screen look bigger. Also ever time I look now it reminds me an iphone 3gs. I just hope they will make a make case or something that will hold it on my belt.
HoOnZ said:
I had the case when it came out and I think the quality of the case and protection is awesome BUT the Gel material picks up dust very easily. There are other Gel type cases that do not do this so if it's not a problem for you then this is an excellent case for you.
Click to expand...
Click to collapse
I am looking for a gel, silicone or plastic(not hard plastic) case that does not collect dust and will slip in a holster. Anyone know of a good one?
I also have the black gel case. LOVE it!!! dont see any reason to change it.
I want the teal one!
So does anybody know why these aren't available on the t-mobile website? Is it simply a supply problem? I find it crazy that this phone has been out for a couple of weeks now and still not a single case available via the internet from a domestic supplier. No T-mobile store in my town, so am I just up a creek?
I love the black gel case that I bought on day 1. The only semi-negative is the dust collection issue and (for us girls) makeup rubs off on it too. Other then that, it is great, appears to protect the phone from drops (sorry to say has happened to me already) and it gives it a nice grip on my dash when I need to set it up there for navigation use.
Does the gel cling to your clothing when you put it in or take it out of your pocket?
Yes it does. It attracts lots of dust. Its an awsome case but I might wait to get mine from ebay I ordered and return this one.
That looks like a silicone case... Not gel. Can someone confirm?
Sent from my SGH-T959 using XDA App
Do they make gel cases that don't stick to clothing? I like the bare phone for its ability to easily slide in and out of the pocket, and I dislike hard cases because they're too bulky.
only if they had one that didnt collect dust...
blanked said:
Does the gel cling to your clothing when you put it in or take it out of your pocket?
Click to expand...
Click to collapse
Yes, and it's actually quite annoying.
That said, it's probably the best soft case I've ever used (though, it doesn't protect the screen for ****). The only thing I think I would've preferred is a an N1-style pouch.
When pulling it out of pocket, it almost always turns it inside-out. It grabs onto lint and dust like a rubber glove. One benefit, however, is that it doesn't slide around when resting on a surface.
I would trade this thing in for a super durable hard case in a second. If they ever release a hard case with a screen protector as well, I'd be all over it.
Household tips from mom (beta)
If it's too sticky, try putting some sort of oil on it and rubbing it off. Probably not olive oil, it's a little acidic, but corn or canola oil might do OK with a lot of wiping. (Don't use your clothes, you'll leave a grease stain, and regular paper towels won't help the lint problem, for sure.)
If it doesn't work, it's mostly silicone it'll wash off with some soapy water (yeah, take the phone out of the case before you do anything).
I haven't found one of these cases yet, but oil took the stick right out of my dashboard sticky pad. Theoretically it should work.

Atrix TPU Case Received, pics inside

Hey everyone, I received my TPU case from EBay (item 290530353216) today, here are some comments and pics. The fit is only OK - the cutout for the USB/HDMI ports is a little off, and there is a little bit of an edge around the power button that impedes fingerprint swipability a little. I will say too that I didn't expect it to have the goofy pattern - what is it with TPU cases and argyle patterns?? Also, as you've noticed it is somewhat translucent.
I give it a 3/5. $7 shipped in the US. I'll keep it until another inexpensive case rolls around that is higher quality.
And just in case anyone wonders, on my screen are the Pandora Widget, Android Agenda Widget, and some apps. I am running ADW Launcher (free). Also, I know I left my back panel sticker on there, and that was on purpose.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah seriously with the frikin argyle ****! Its like they made a billion sheets of the argyle TPU and they just like heat mold them to phones (not like thats how they're made). This will be my third phone encased in argyle TPU. Other two were the dark one like yours, this time I got sick of trying to hide the argyle and people asking about the stupid pattern. I got clear so, "yes its frikin argyle! got a problem!?"
Waiting for the Realook screen protectors to be cut. no idea why it takes them so long to cut the right size. Realooks are by far the best screens...
Everything is temporary at this point...I'll buy nicer stuff once my 30 days are up.
I was fortunate enough to have a solid black non-patterned TPU case for my EVO that someone on this forum actually commissioned and was selling out of their garage essentially.
Check out tpu-cases.com. I bought an all black one there, shipped same day. Quality is nice, it's glossy, feels good in the hand for an 8$ case.
the 1.99 one I got from ebay is decent
Nice, never seen that site before. I'll order one up and hopefully it'll get here by the time I'm home from travel. Wish someone would make one like I had for my Evo though - it was matte on the back and shiny on the front.
daveop said:
Check out tpu-cases.com. I bought an all black one there, shipped same day. Quality is nice, it's glossy, feels good in the hand for an 8$ case.
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Well I tried the Speck (or whatever it's called) case from AT&T and hated it...looked and felt like a toy.
Then I tried the Otterbox Impact (the smallest case they make). It's made of a type of rubber that sucks up all dust and won't let it go. It's pure black rubber but after putting it in my pocket and driving up to Starbucks to meet some friends...it looked gray. My pockets don't have any lint or anything in them...and yet the case now looks completely gray. I just put it on yesterday. It's also a bit big for my tastes...and the phone can easily come out of the bottom.
I'm going to try the cheapest cases on eBay. They always worked great for my Nexus 1 and most other phones I've used. The cheap thin rubber is fantastic for me. The phone's so freaking sexy...I just don't want to add a bunch of mass to it.
hotleadsingerguy said:
Well I tried the Speck (or whatever it's called) case from AT&T and hated it...looked and felt like a toy.
Then I tried the Otterbox Impact (the smallest case they make). It's made of a type of rubber that sucks up all dust and won't let it go. It's pure black rubber but after putting it in my pocket and driving up to Starbucks to meet some friends...it looked gray. My pockets don't have any lint or anything in them...and yet the case now looks completely gray. I just put it on yesterday. It's also a bit big for my tastes...and the phone can easily come out of the bottom.
I'm going to try the cheapest cases on eBay. They always worked great for my Nexus 1 and most other phones I've used. The cheap thin rubber is fantastic for me. The phone's so freaking sexy...I just don't want to add a bunch of mass to it.
Click to expand...
Click to collapse
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Fixter said:
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Click to expand...
Click to collapse
i like the feather as well. not much in terms of impact protection, but most of my scratches come from the phone vibrating on the desk over time and scuffing the battery door, so its a nice line of defense against that. also, its a little less slippery than the standard battery door which i like
domin8 said:
i like the feather as well. not much in terms of impact protection, but most of my scratches come from the phone vibrating on the desk over time and scuffing the battery door, so its a nice line of defense against that. also, its a little less slippery than the standard battery door which i like
Click to expand...
Click to collapse
Yeah its great for worrying less about the normal wear and tear.
I particular like the argyle tpu cases which give decent protection and feel. i have it for the ipad, galaxy tab, atrix, inspire, and xoom.
www.degasis.net offers these as well
I ordered my case from http://www.degasis.net/models/atrix.html (as the poster above recommended. $6.98 shipped
This is the best fitting TPU case I've had across all my devices. The best part is that it actually makes the on/off button easier to push and the finger scanner easier to operate (its cut at the perfect angle to compliment it). Its slightly different cut but a better fit than the pictures posted above.
I'll post pictures when I come across another camera some time today or tomorrow.
TPU is far superior to any other case material in my book. perfect balance of grip/non-stick, thinness, protection, and fit.
eatkabab said:
I ordered my case from http://www.degasis.net/models/atrix.html (as the poster above recommended. $6.98 shipped
TPU is far superior to any other case material in my book. perfect balance of grip/non-stick, thinness, protection, and fit.
Click to expand...
Click to collapse
looks exactly like the case i got from ebay for $1.99 lol
Incipio protection?
Fixter said:
You can try the Incipio Feather. I purchased it yesterday and I like a lot.
Click to expand...
Click to collapse
I really like the look and feel of the Incipio low profile cases. Do you feel like it would do any good if you dropped the phone?
grayfoxx said:
I really like the look and feel of the Incipio low profile cases. Do you feel like it would do any good if you dropped the phone?
Click to expand...
Click to collapse
That's the problem I have with the feather - it doesn't protect either end of the device, only the sides and back.
Judging by the picture, it looks like you have that "textured" screen protector. What is the screen protector you are using? Those are my favorite kinds and I have been trying to find one for a while! thanks in advance
Kbc, who are you asking? I'm using an AT&T screen protector. It's matte and perfectly smooth.
kbc88 said:
Judging by the picture, it looks like you have that "textured" screen protector. What is the screen protector you are using? Those are my favorite kinds and I have been trying to find one for a while! thanks in advance
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
phobos512 said:
Nice, never seen that site before. I'll order one up and hopefully it'll get here by the time I'm home from travel. Wish someone would make one like I had for my Evo though - it was matte on the back and shiny on the front.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Sounds similar to the one i had on my desire but I cant find it anywhere now
eatkabab said:
This is the best fitting TPU case I've had across all my devices. The best part is that it actually makes the on/off button easier to push and the finger scanner easier to operate (its cut at the perfect angle to compliment it). Its slightly different cut but a better fit than the pictures posted above.
Click to expand...
Click to collapse
OK, you've sold me on this case Good description of how it is, what colour did you get?

Case v. No Case?

God I hate using a case with this phone. Its so thin, yet hearty. And looks so damn good naked.
Has anyone found a case that barely impedes on the thickness of the device yet still provides adequate protection? I use the OEM gel skin and it's great protection but I'll be damned if it doesn't thicken my phone up like a sunuvabitch. Makes it feel like my old t-mo Wing!!!!
TJBunch1228 said:
God I hate using a case with this phone. Its so thin, yet hearty. And looks so damn good naked.
Has anyone found a case that barely impedes on the thickness of the device yet still provides adequate protection? I use the OEM gel skin and it's great protection but I'll be damned if it doesn't thicken my phone up like a sunuvabitch. Makes it feel like my old t-mo Wing!!!!
Click to expand...
Click to collapse
let me start by saying...i HATE cell phone cases...ive had all kinds of phones from nextels to moto pebbles to the mytouch 4g and never once NEVER have i bought a case for one
so knowing that...i bought one of the tpu fusion cases...let me tell you something...i couldnt be happier with this case...very thin...very light...lots of good grip and feel to the case and it fits the phone like a glove
now i dont have a whole helluva lot experience with cases especially for this phone...but this tpu fusion case has to be hands down the best just based on what ive read and seen about the other cases for this phone
so i recommend you spend the 5$ it costs for the tpu fusion case and just order one
LINK: http://tinyurl.com/4hwj6jj
BTW im not any type of sales person or anything for the cases or the people who sell em....just love this case a lot
That's what I keep hearing. Thanks for the insight, and the link. I can't believe the TPU cases are so damn cheap...
TJBunch1228 said:
That's what I keep hearing. Thanks for the insight, and the link. I can't believe the TPU cases are so damn cheap...
Click to expand...
Click to collapse
not a problem...hope the link helps
as for cheap...yes they are very cheap and i couldnt believe it either...but quality doesnt seem to be lacking even at that price
I LOVE the way the MT4G looks and feels without a case. However, I've dropped my phone 3 times in the past month. Each time was indoors on carpet or hardwood, but still it was enough to keep me using my Epik cases.
I just wish the cases were just a little thinner. I'd risk less impact protection for a slimmer profile.
I bought the sleeve that came with the Nexus One off of eBay for $5. A little snug at first but after a few days fits perfect.
I like it because you get the naked feel of the phone but it's protection in your pocket. It also cleans the fingerprints off for you I've been using it for 3 months and my phone looks brand new.
Plus it's stylish with the little Android logo on it.
Have you tried a skin? I know it's not the same as a hard case, offers less impact protection, but it adequately protects the phone from cosmetic scratches and blemishes, and I do believe it helps with your typical cell-phone drop (i.e. I think it helps protect the phone when dropped a few feet, but anything hgher than 5 or 6 feet and it won't make much of a difference). But with any case, if a phone takes a long fall it's gone, and I don't plan on tossing it off the side of a roof. I've been using Best Skins Ever for about a month and am REALLY pleased. Like you, I'm not fond of big bulky cases - I like the natural look of the phone, and these skins allow me to protect it while not impeding on the size or look of the phone AT ALL. BSE is all I've tried but there are many different kinds - a lot of people complain of orange peel/grip issues, but I am totally happy with the BSE, and I'm picky about texture.
On a note, i don't understand why people put a super thick case on a thin phone, like a otterbox defender case on a iPhone 4.... totally defeats the purpose of a thin phone and looks dorky...
sent from my rooted mytouch 4g
Slip case for MT4G
I do exactly what Joey above does-use an OEM Nexus One case. Protects the phone and you get the nice feel of its shape and texture when you unzi-- I mean, take it out.
But I turn the N1 case inside out because I hate the feel of the regular fabric.
FWIW my phone got a lot creakier after I put on a TPU case. I developed a creak by the camera button after using it naked for a few weeks. I than got a TPU case from ebay, and now if I remove the case, the whole top creaks when naked.
Maybe it would have happened anyways, but I thought i'd throw it out there.
Freek91 said:
so i recommend you spend the 5$ it costs for the tpu fusion case and just order one
LINK: http://tinyurl.com/4hwj6jj
BTW im not any type of sales person or anything for the cases or the people who sell em....just love this case a lot
Click to expand...
Click to collapse
Thanks for the link! Ordered a couple for myself and the wife. I like the look of it with the different textures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
since i just scratched my chrome bezel after owning it for a couple months im going to get the case. ugh why did i wait
I'm aganist cases, just because it hides the beauty of a device and the thiness. But I just got a solid black glossy TPU case and it looks awesome, I got it off ebay and don't think the seller has anymore of them. But my phone is white and I hate it, I kick myself for getting the white one, actually had no choice, when I traded my G2 off cragislist.
But with this case, I don't see any white, except around the charger port, and **** looks sick. And I'm the type of person that can't stand any scratches on their phone, I need it to look perfect and brand new. Never say you won't drop the phone and get a nasty scratch on it.
I would prefer not having a case, but my biggest concern is getting dust under the LCD. My e-71 was a very solid phone, and it eventually started getting dust under the screen. I hope to have the mt4g for a while and I'm trying to avoid any dust issues.
- Frank
My TPU case just saved my life again! Fell 4 feet onto the tiles and just bounced onto its back, zero harm done.
Sent from my HTC Glacier running CM7 RC
ChodTheWacko said:
I would prefer not having a case, but my biggest concern is getting dust under the LCD. My e-71 was a very solid phone, and it eventually started getting dust under the screen. I hope to have the mt4g for a while and I'm trying to avoid any dust issues.
- Frank
Click to expand...
Click to collapse
Curious how a case would prevent dust from getting under the LCD? Where does the dust enter?
Wow, they got here fast via regular mail! Look and feel is great. The black is solid black, not transparent at all, which is good for me. The purple I got for my wife is indeed just as seen on the website.
Buttons have a good, positive feel, not hard to press at all. Texture on the sides is nice and provides good grip. Best of all, makes the phone feel like the lean mean machine it is, unlike the T-Mobile skins they replaced.
Here are some pics of it on my phone:
tmagritte said:
Curious how a case would prevent dust from getting under the LCD? Where does the dust enter?
Click to expand...
Click to collapse
To be honest, I'm not sure. The only thing that makes sense to me is that the dust somehow gets pushed into the phone's cracks from pressure/friction of just pulling in in/out of pockets. Adhesives/seals never stay perfect, and it's just a matter of time. This has always been an issue with Phones/PDAs.
A case is basically another layer of protection. Also, since the phone is thicker pocket lint is now rubbing against the case, not directly rubbed into the phone's edges/cracks.
That's the theory anyway. My phone just fell off my bed and hit a table.
It was comforting to hear a rubbery impact versus a metal/wood whack.
- Frank
case on of course, dont want to see any scratch on my phone...
i recently got a clear TPU Fusion case for my white MT4G, it looks awesome and well protected
strcheng said:
case on of course, dont want to see any scratch on my phone...
i recently got a clear TPU Fusion case for my white MT4G, it looks awesome and well protected
Click to expand...
Click to collapse
Could you post a picture please, I really wanna get the clear one to show off my white mytouch but I'm not sure how it would look.
Sent from my HTC Glacier using XDA Premium App

Ballistic Cases for Atrix!

Came across these by accident. I LOVE THEM! I was looking at the cases available for the Infuse, and found this odd brand by the name of Ballistic making a case for it. I became jealous and Googled them. Google took me to their website which I discovered, OUR PHONE is supported!
Here's the link (they are $35 & $50 for the one on the right): http://www.goballisticcase.com/products/motorola-atrix-ballistic-sg-series-case
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are great if you have a UHaul to carry your phone around in after you have encased it in this thing!
The second one from the right...
It looks like it would suck to wake the phone up or use the fingerprint sensor.
And taking this on a plane TSA would think it's a bomb
Mgamerz said:
And taking this on a plane TSA would think it's a bomb
Click to expand...
Click to collapse
Wait!............You haven't seen the commercial???.............It's a phone that acts like a laptop............or, it's a laptop that acts like a phone............no way this could be a bomb!
Bomb bomb bomb............bomb bomb ba bomb..............."Doing Atrix the Focker way"!
CaelanT said:
Wait!............You haven't seen the commercial???.............It's a phone that acts like a laptop............or, it's a laptop that acts like a phone............no way this could be a bomb!
Bomb bomb bomb............bomb bomb ba bomb..............."Doing Atrix the Focker way"!
Click to expand...
Click to collapse
Haha!
Sent from a Honeyglowin' Atrix
kimmikolter said:
Came across these by accident. I LOVE THEM! I was looking at the cases available for the Infuse, and found this odd brand by the name of Ballistic making a case for it. I became jealous and Googled them. Google took me to their website which I discovered, OUR PHONE is supported!
Here's the link (they are $35 & $50 for the one on the right): http://www.goballisticcase.com/products/motorola-atrix-ballistic-sg-series-case
Click to expand...
Click to collapse
Just emailed them to let me know when they are available. I have the otterbox defender and while I usually recommend them, the one for the atrix has issues. I'm on my second outer silicone part, and this one doesn't fit right either. The bottom corners bulge away from the inner plastic part, which makes them come off pretty easy.
barry99705 said:
Just emailed them to let me know when they are available. I have the otterbox defender and while I usually recommend them, the one for the atrix has issues. I'm on my second outer silicone part, and this one doesn't fit right either. The bottom corners bulge away from the inner plastic part, which makes them come off pretty easy.
Click to expand...
Click to collapse
x2
The cases happen to be made right here in Fort Lauderdale on the other side of town. I may go get one on Monday. I have the Commuter case which I like, especially since the ports and earphone jack have covers to keep out dust and dirt and the case is easy to get on and off. I dunno if the ballistic has covers and there are no pictures of the front i can find but the design and colors look nice and I am sure the protection is good. Anyone get one yet?
Damn that thing looks thicker then my otterbox defender case. I like the color schemes though. Does it come with a holster? I have to use the holster with my defender case, just to hard putting it in my pocket.
sifon187 said:
Damn that thing looks thicker then my otterbox defender case. I like the color schemes though. Does it come with a holster? I have to use the holster with my defender case, just to hard putting it in my pocket.
Click to expand...
Click to collapse
Yea, the big one comes with one, at least it's in the pictures....
panflute said:
The cases happen to be made right here in Fort Lauderdale on the other side of town. I may go get one on Monday. I have the Commuter case which I like, especially since the ports and earphone jack have covers to keep out dust and dirt and the case is easy to get on and off. I dunno if the ballistic has covers and there are no pictures of the front i can find but the design and colors look nice and I am sure the protection is good. Anyone get one yet?
Click to expand...
Click to collapse
Let us know if you get one. I definitely want one! Black on black is my choice, but the red/black looks pretty cool too.
Awesome!
Got my Ballistic SG
Well I recieved my Ballistic SG in the mail today, got it off ebay for $22 bucks! I haven't bought a lot of cases for my Atrix yet, I tried a Otterbox Impact on launch day and was disappointed with that. This case however feels extremely tough, My brother has the Otterbox Commuter, which i thought was awesome untill this one showed up. It feels very solid, The ports on the side are left exposed, as well as the speaker grill. The space for the fingerprint sensor does feel a slight bit cramped when swiping downwards, I may have to re-enter my prints to get it to read more accurately, but for now it doesn't seem to affect it too much. I've only had it for about 30 minutes but so far i'm impressed. The case doesn't slide around on the phone (though that may be in part to my invisible shield). The rubber/silicone layer does attract dust, but overall I'm happy with my purchase. I attached a few pictures if anyone's interested.
Reaverofdawn said:
Well I recieved my Ballistic SG in the mail today, got it off ebay for $22 bucks! I haven't bought a lot of cases for my Atrix yet, I tried a Otterbox Impact on launch day and was disappointed with that. This case however feels extremely tough, My brother has the Otterbox Commuter, which i thought was awesome untill this one showed up. It feels very solid, The ports on the side are left exposed, as well as the speaker grill. The space for the fingerprint sensor does feel a slight bit cramped when swiping downwards, I may have to re-enter my prints to get it to read more accurately, but for now it doesn't seem to affect it too much. I've only had it for about 30 minutes but so far i'm impressed. The case doesn't slide around on the phone (though that may be in part to my invisible shield). The rubber/silicone layer does attract dust, but overall I'm happy with my purchase. I attached a few pictures if anyone's interested.
Click to expand...
Click to collapse
Not a bad looking case ya got there... is it rubber or plastic or both?
Edit: so the grey is rubber, red is plastic?
Sent from my Motorola Atrix 4G on the network with the most backhaul, whatever that is. This post might have errors as I hate touchscreen keyboards.
Yeah, the black part is rubber, the red is plastic, with a weird layer of black, that feels like slightly rubberized plastic. After using it for a few hours now I'm still satisfied with it. Definitely feels more solid than my brothers commuter case. Now to wait for the HC to be released and try that sucker out.
Dude, that's freaking sweet looking. Can't wait for the HC cases to be released.
Reaverofdawn said:
Yeah, the black part is rubber, the red is plastic, with a weird layer of black, that feels like slightly rubberized plastic. After using it for a few hours now I'm still satisfied with it. Definitely feels more solid than my brothers commuter case. Now to wait for the HC to be released and try that sucker out.
Click to expand...
Click to collapse
Can you please drop your phone from the second or third floor while it's in the case and if nothing happens can you drop it without a case? I just want to check how though is the case before investing in it.
fincan said:
Can you please drop your phone from the second or third floor while it's in the case and if nothing happens can you drop it without a case? I just want to check how though is the case before investing in it.
Click to expand...
Click to collapse
epic !
I like it! May replace my Commuter, even though I couldnt be happier with the OB.
covered ports
I did not buy this case (yet). It looks really similar to the Commuter case as the designs are the same///a soft rubber held on with a hard plastic. However, the ports are not covered on this one. On the commuter both ports are covered in addition to the earphone jack. Someone here reported dust on the inside of the screen and it may have entered thru the earphone jack? On my wish list is a case with a built in stand.

Case Mate Tough Review

Hey Guys,
I managed to pick up a case mate tough in black today.
First impressions, with the case on it makes the phone a much nicer size to hold and the rubber backing on it gives it a very sturdy grip.
Most screen protectors out there which are dry tends to leave a gap around the edges of the phone, with the case mate tough on this fills the gap up while giving it the lay on the table design.
The case also gives easier access to the power and volume buttons, however i am finding it too easy to accidently press as it feels quite sensitive.
There are 2 nicely cut outs for the noise cancelling and microphone, the rest of the cutouts i must say are perfect.
The home button however is slightly difficult to get to, you have to press it more direct from the top rather than from the bottom up, other than that its pretty must perfect and it protects from drops!
I've attached some photos below, feel free to ask any questions though and i will try my best to answer them.
Hope this helps you guys when purchasing a case!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice review! I didn't buy that one, but I was consindering brush aluminum case from case mate.
And, I guess u need this, as well.
Haha thanks! I actually forgot to wipe the screen down! First review so I'll learn to do it next time.
I looked at the case mate aluminium as well; however it doesn't cover the top or bottom completely so that's something to keep in mind.
Sent from my GT-I9300 using xda premium
blue-bear said:
Haha thanks! I actually forgot to wipe the screen down! First review so I'll learn to do it next time.
I looked at the case mate aluminium as well; however it doesn't cover the top or bottom completely so that's something to keep in mind.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
No worries! i was just joking around. I wanted to review some cases, but my device is still coming.. :/
Haha I know mate! Reviews are helpful so I thought I'd give back to the xda community
Sent from my GT-I9300 using Tapatalk 2
Not trying to thread jack, But I figured I'd add my little review to give another view point!
Here is a review of the case-mate tough case. If you owned the tough case for your galaxy S II, you'll love this one. They have made the rubber inside case much thicker around the edges of the phone for added protection. The buttons are extremely easy to press and you can even hear them click in as if there was no rubber covering them at all.
After having the tough-case on for about a year the thin layers of the around the headphone jack and USB port started tearing up. Those areas are much thicker this time around. I can throw this thing around like it's a rock and it has no issues. Great protection and well worth the money. If you plan on buying it from case-mate directly make sure you use the CMPeople20 discount code to get 20% off your order. I cost me $33.50 with expedited shipping. Would have been $27 with the free shipping they are offering right now.
Please PM me if you have any specific questions about the case.
Cheers!
how does the case make the home button hard to press? it doesnt look like its covering touching it
imsuperjp said:
how does the case make the home button hard to press? it doesnt look like its covering touching it
Click to expand...
Click to collapse
I can see it being tough, the home button is pretty close to the bottom of the screen
Sent from my SAMSUNG-SGH-I747 using XDA
The home button is quite close to the edge of the case making it slightly difficult to press unless you are direct with the button
Sent from smy GT-I9300 using Tapatalk 2
Looks tough. Mind dropping it a couple of times to see how well it protects your phone?
Speaking of dropping it, i dropped it accidentally today and it survived!
Don't mean to be negative but I got the case today and it feels great except I'll be returning it. Why? Because the top front and bottom front of the case don't have hard plastic holding down the rubber lips, so they get caught and stretch in the pocket when retrieving. This over time may cause the rubber to tear or stretch too much cause it's very elastic and thin.
Whereas the Otterbox Commuter has the plastic sides cover top, bottom and both sides so that no rubber is loose, but held down tight. A much better product from my experience in the past and looking forward to having it when it arrives in the next week or so. This review will cover what I was talking about. http://www.youtube.com/watch?v=21Dxcyfm3Vg
UPDATE: See my review on both cases here. http://forum.xda-developers.com/showthread.php?p=27997216#post27997216
i also ordered a otterbox commuter as well, should be getting it soon
I ordered the ToughCase for my S3 after having it on my vibrant for the past 2yrs. I've dropped that thing on concrete multiple times and various other surfaces and never had an issue. It wasn't until the past month that the outer plastic starting cracking in the corners which was to be expected at this point.
Also, in my experience the rubber doesn't permanently stretch or rip and I've pulled the phone out of my pocket by the rubber piece many times.
I had the tough case for my GS2. It was ok. Good protection but the silicone was mighty flimsy and pulled when I removed the phone from my pocket.
I also felt that the plastic outside needed to be a little tacky. It was hard plastic and had good texture for grip but was a bit too hard and therefore just a little too smooth on the hand. Now where it was smooth (almost slick) in the hand I felt it was also too rough coming out of the pocket as the texture gripped to my clothing a little to well.
I feel my experience with the GS2 case will keep me from buying it for my GS3. They may have changed those problems though.
I loved the body glove case (the Mirage i believe) I had for my GS1. It had alternating stripes of smooth/tacky and textured lines. It slid in and out of the pocket perfectly and had great grip in the hand. Perfect combination IMO.
When you say your buttons are extremely easy to press is that going to be a problem. I had the seidio active case. Are the buttons as easy to press as that case because I don't like buttons that are too easy to press. Also will it slide easily in and out of your pocket??
Nice review! Have u ever used the incipio silicrylic? seems very much comparable to the Case-Mate Tough and I dont know which one to choose.. Heres a link http://www.amazon.com/Incipio-SA-302-Silicrylic-Silicone-Samsung/dp/B0085VAP38/ref=sr_1_2?s=wireless&ie=UTF8&qid=1353870767&sr=1-2&keywords=incipio+s3
i was about to order this case but the back hard plastic had me kinda iffy.. ive had cases that the rubberized coating starts to wear out and fall off. Does the back part have the rubberized coating or is it full rubber
1slow4G said:
i was about to order this case but the back hard plastic had me kinda iffy.. ive had cases that the rubberized coating starts to wear out and fall off. Does the back part have the rubberized coating or is it full rubber
Click to expand...
Click to collapse
I second this question, does the polycarbonate back have a rubberized or is it just slick?
Another way to ask, if I lay it on a slanted surface back side down, will it slide right off or have a little grip?
rocket321 said:
I second this question, does the polycarbonate back have a rubberized or is it just slick?
Another way to ask, if I lay it on a slanted surface back side down, will it slide right off or have a little grip?
Click to expand...
Click to collapse
Little bit of grip I think.
Sent from my SPH-L710 using Tapatalk 2

Categories

Resources