hi! i tried to install the new custom rom based on jb but when install any kind of gapp.zip and reboot just have a goggle logo and the reboot to recovery..
I flash rom since g1 so i know what i do when install zip package. wipe cache/devil cache if need fix permission but with all custom rom i have the same trouble!
when install the rom all is fine so i can boot in the system ecc but no with gapp! any idea
Solved by reinstall a clockwork recovery.. i had 6.0.0.3 and now with the last release (6.0.0.5) all workin fine!
Related
I had install the Miui 1.4.8 (gingerbread). Now my phone won't boot up. There is only the screen with miui...
Can some one help me?
Boot to recovery and flash a new rom.
Just do a FULL wipe in recovery, should do the job
thx. now it works... i had install the rom with the rom manager
CWM is no more there after installing a new rom and new rom won't load. Then i have to flash the stock rom again > root it > install CWM. Again when i install any rom it would install normally but nothing gives a blank screen after reboot and the stock rom is not even there.
The situation is occurring with the following;
Phone: Sony Xperia ARC S (LT18i)
Bootloader: unlocked
Android version 2.3.4 (Build 4.0.2.A.42) -
I have made multiple attempts on installing new roms but nothing works. Every time i reboot after installation im left with a blank screen. Can anyone advise what the problem could be ?
Thanks
Did u flash the kernel for the ROM u flashed ? The ROM will not boot without its kernel.
Sent from my Xperia Arc S using Tapatalk 2
mtpocketz said:
CWM is no more there after installing a new rom and new rom won't load. Then i have to flash the stock rom again > root it > install CWM. Again when i install any rom it would install normally but nothing gives a blank screen after reboot and the stock rom is not even there.
The situation is occurring with the following;
Phone: Sony Xperia ARC S (LT18i)
Bootloader: unlocked
Android version 2.3.4 (Build 4.0.2.A.42) -
I have made multiple attempts on installing new roms but nothing works. Every time i reboot after installation im left with a blank screen. Can anyone advise what the problem could be ?
Thanks
Click to expand...
Click to collapse
you must be installing CWM into the system through one touch command prompt program.. as such as soon as the ROM changes and you wipe out data and cache, CWM disappears..try flashing a custom recovery kernel which are available even for stock roms.
Also follow these steps for a custom ROM (eg CM9):
download the ROM, extracted it into a folder, copy the boot.img where you can remember, then copy the original cm9 ZIP - not the extracted folder- into the root of SD..use fastboot mode of flashtools to flash the kernel boot.img which you had copied..its a recovery kernel so CWM should open..wipe out SD data..then cache..and then go into advanced option and clear dalvik..and then proceed to install zip from sd..then gapps.zip if u want..it should install fine..and then reboot.
Press Thanks if you think i was of help to you..:good:
Thanks
iwarind said:
you must be installing CWM into the system through one touch command prompt program.. as such as soon as the ROM changes and you wipe out data and cache, CWM disappears..try flashing a custom recovery kernel which are available even for stock roms.
Also follow these steps for a custom ROM (eg CM9):
download the ROM, extracted it into a folder, copy the boot.img where you can remember, then copy the original cm9 ZIP - not the extracted folder- into the root of SD..use fastboot mode of flashtools to flash the kernel boot.img which you had copied..its a recovery kernel so CWM should open..wipe out SD data..then cache..and then go into advanced option and clear dalvik..and then proceed to install zip from sd..then gapps.zip if u want..it should install fine..and then reboot.
Press Thanks if you think i was of help to you..:good:
Click to expand...
Click to collapse
Got it - Yes i was installing CWM within stock rom via market. though i tried to install it through adb/windows but still i guess the problem was all about not installing a custom recovery kernel.
Thanks a lot !
Installation aborted error status 7 xperia mini
I succesfully rooted my xperia mini and installed cyanogenmod 9 rc2 (smultron). The device was running fine with no problems then i did a huge mistake i entered in the cwm recovery and i formatted cache data syatem and all that listed there.then i reboot device it stuck on free xperia project logo.then i tried to install rom via cwm i started to give error installation aborted status 7 error. Please help no backup of official rom.
aditya naik said:
I succesfully rooted my xperia mini and installed cyanogenmod 9 rc2 (smultron). The device was running fine with no problems then i did a huge mistake i entered in the cwm recovery and i formatted cache data syatem and all that listed there.then i reboot device it stuck on free xperia project logo.then i tried to install rom via cwm i started to give error installation aborted status 7 error. Please help no backup of official rom.
Click to expand...
Click to collapse
Download stock ROM and install it via Flashtool.
My signature, there is link to download stock ROMs. Search for proper one and install it.
HI ,
After much trouble with unbricking(Soft), managed to boot in to custom rom (Thanks to MafiaGR ), but each custom rom keep rebooting in like 10-15 secs.
I followed every step and managed to install custom rom , tried avatar , thinking bridge, cm10.1 nightly, but once boot the phone hangs and reboot and gives kernel crash message .
I tried CM10.1 with Kite r30 kernel , no crash report but still phone reboots.
Some body help...
Device : Intl E975
Running twrp 2.5.0.0
Unlocked, Rooted
mhmm..
format system, data, cache
install zip (without gapps pack)
waiting...
is it booting now?
when it doesnt boot, flash original FW and try it a second time (root, unlock, flash rom...)
2nd Sky said:
mhmm..
format system, data, cache
install zip (without gapps pack)
waiting...
is it booting now?
when it doesnt boot, flash original FW and try it a second time (root, unlock, flash rom...)
Click to expand...
Click to collapse
The rom boots, but reboots in like 10-15 secs. whats is original FW ??
I just flashed agat recovery 0.2.2 and i tried to install cm 11 on my phone but i got a error 7 and i dont know what i am doing wrong.
You will need to install cm10 BEFORE installing cm11 because you need cwm recovery to flash cm11 and cwm recovery is in cm10.
This one should work: http://forum.xda-developers.com/showthread.php?t=2238252
Don't bother flashing gapps or other zips, just flash the rom then boot into cwm recovery do a full wipe and flash cm11.
Boot Loop
Hi , So my problem as i mentioned in the title , im facing the boot loop i just get logo and nothing else
I flashed custom ROM CM 12.1 , to be clear i was running that rom very well and then reflashed the stock rom for it ..
what happened is : i downloaded the official cm 12.1 from the cm site and gapps ,, boot into recovery ..
- Wiped cache
-wiped system
-wiped data
-system reset
-install zip
-reboot
and got stuck in the cm logo ,, i fixed that problem before but i can't remember how now , i need help from you guys because of course you know better than i do
What recovery are you using? You'll want to make sure you're on the latest version.