Develop Bugs

[Q] About MIUI and SetCPU

Hello, I just wanted to know what a good setcpu profile you guys would recommend for MIUI 1.21.11 and stock kernel that comes with the ROM?
Sent from my PC36100 using XDA App

No one huh.
Sent from my PC36100 using XDA App

I've never used profiles on any MIUI build. I'm on 1.1.28, I OC it to 1152, governor on smartass and leave it.

_MetalHead_ said:
I've never used profiles on any MIUI build. I'm on 1.1.28, I OC it to 1152, governor on smartass and leave it.
Click to expand...
Click to collapse
Sounds good, I'll definitely give it a shot. Thanks for the response.
Sent from my PC36100 using XDA App

Godmode Kernal

Who is using the Godmode kernal with a rom? If so, what is the max overclock for you???
Sent from my PC36100 using XDA Premium App

Using the godmode kernel I was able to overclock my 0003 hardware EVO to the highest setting allowed. I don't use this kernel anymore so I can't be exact on the numbers.

I tried it for the past 3 days... Set CPU showed it was set to max of 1119 but the actual speed was stopping itself at 998mhz
The kernel itself was decent tho.. already seemed quicker than tiamat or savagedzen, and battery life was much better so I will likely go back.

github said:
Using the godmode kernel I was able to overclock my 0003 hardware EVO to the highest setting allowed. I don't use this kernel anymore so I can't be exact on the numbers.
Click to expand...
Click to collapse
Haha. Why does everyone say kernal?
Gimme a couple a days to come up with a new sig that is cool.

Because its letting me overclock at the max but when using tiamat I overclocked alot more... Anybody know of a better kernal?
Sent from my PC36100 using XDA Premium App

eazzy28 said:
Because its letting me overclock at the max but when using tiamat I overclocked alot more... Anybody know of a better kernal?
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Then use tiamat or savage zen
Sent from my PC36100 using XDA Premium App

Tiamat was unstanble after 1152... I want at least 1190, lol
Sent from my PC36100 using XDA Premium App

Which Governor to Use?

I flashed a different kernel and now Ondemand is gone, which governor is closest to that in battery life and performance?
Sent from my PC36100 using xda premium

What kernel you using
Sent from my PC36100 using XDA App

AtmosFEAR4701 said:
I flashed a different kernel and now Ondemand is gone, which governor is closest to that in battery life and performance?
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
http://www.setcpu.com/#7
Check out that link, on the setcpu site they break it down for you. Also check out a few of the guides on here, they have it even further in depth talking about which governors are best for what.

Interactive would be the closest to ondemand if its available or interactiveX

Setcpu setup

Here is my "Setcpu" setting what is yours. Looking for tips and help still new with ovecloacking.
Using rogue "hitman" kernel
Sent from my SPH-D710 using xda premium

i would like to see your battery stats
Sent from my SPH-D710 using XDA

set cpu, does not currently work for ICS right ?

Will post tomorrow just finish recharging it
Sent from my SPH-D710 using xda premium

daniel4653 said:
set cpu, does not currently work for ICS right ?
Click to expand...
Click to collapse
I know it creates problems with CM9. Not sure if it also applies to other ICS builds or leaks.

Stay away from set cpu on ICS it freezes phones well at least mine

This is 4hours later little use while at work
Sent from my SPH-D710 using xda premium

master acehole said:
Stay away from set cpu on ICS it freezes phones well at least mine
Click to expand...
Click to collapse
It freezes my phone as well on ICS.

djakx1 said:
It freezes my phone as well on ICS.
Click to expand...
Click to collapse
Ya I was using setcpu on stock-rooted EL29. I also found out ICS has a feature that works like setcpu, so ya don't use it on ICS cause it will bugout and crash.
Helpful tip --
If you are looking for another app that save up little more battery life you could check out "JuiceDefender"

Mulliganmonstar said:
Here is my "Setcpu" setting what is yours. Looking for tips and help still new with ovecloacking.
Using rogue "hitman" kernel
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
What is the best govenor to set if you're trying to save the most battery life?
I'm confused between the conservative and ondemand. What are their differences?
Sent from my SPH-D710 using xda premium

alwaysbelieve1 said:
What is the best govenor to set if you're trying to save the most battery life?
I'm confused between the conservative and ondemand. What are their differences?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Use conservative. It scales up the CPU slower, so you'll end up saving more battery in the long run. I've only noticed very minimal lag between the two.

Anyone else have good advice for it?
Sent from my SPH-D710 using Tapatalk

Derp
Sent from my SPH-D710 using Tapatalk 2

[Q] 4g not showing on status bar

all the roms ive flashed never show 4g, is there any particular reason? all and any help is appreciated. thnx in advance

idb117 said:
all the roms ive flashed never show 4g, is there any particular reason? all and any help is appreciated. thnx in advance
Click to expand...
Click to collapse
Anything but a tmo base rom will show a h instead because tmo doesn't have real 4g lte and that's what the 4g stands for....the h is tmo 4g...
Sent from my SGH-T989 using xda premium

It always shows "3g "when idle. As soon as you need it, the 4g radio kicks on. Power conservation I think. I was freaked out at first also, but it works great. And battery life on cm10 with hotcakes kernel is fantastic.
Sent from my cm_tenderloin using xda app-developers app

ctrlaltdeln said:
It always shows "3g "when idle. As soon as you need it, the 4g radio kicks on. Power conservation I think. I was freaked out at first also, but it works great. And battery life on cm10 with hotcakes kernel is fantastic.
Sent from my cm_tenderloin using xda app-developers app
Click to expand...
Click to collapse
+1 and performance...I have the gpu oc and oc 1.72 and this thing flies
Sent from my SGH-T989 using xda premium

djtheraven said:
+1 and performance...I have the gpu oc and oc 1.72 and this thing flies
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
i get decent performance at 1.8, is underclocking gonna slow things up?

idb117 said:
i get decent performance at 1.8, is underclocking gonna slow things up?
Click to expand...
Click to collapse
A little...less power means less performance
Sent from my SGH-T989 using xda premium

Dude...that is a good antutu score. Best I got @1.7 was and GPU script was 8600. What tweaks and kernel are you running? What governors?
I'm also running v6 script and I never got close to that score.
Nicely done.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

What app do I install to test my score?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

ctrlaltdeln said:
Dude...that is a good antutu score. Best I got @1.7 was and GPU script was 8600. What tweaks and kernel are you running? What governors?
I'm also running v6 script and I never got close to that score.
Nicely done.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I'm using hotcakes kernel cfq 1024 gpu oc and interactive
Sent from my SGH-T989 using xda premium

This is at stock 1.5
Sent from my SAMSUNG-SGH-T989 using xda app-developers app