pc doesn't recognize after installing Android 4.1 - Kindle Fire Q&A, Help & Troubleshooting

Buddies, pls help with the problems that I can't transfer the files to the Kindle Fire. My PC doesn't recognize my gadget after I installed the jelly bean. Pls help!!

does it still not recognizing after enabling usb mass storage?

Try to turn off Adb over USB in developer settings. Might help

Go to the notifications area at the top, by swiping down (like notifications centre on iOS), and tap the USB notification. Then tap turn on USB storage or whatever the button says.

Related

[Q] CM7: "Connect to pc" menu missing

Hi,
Apparently I can not post on the appropriate thread, so I'll have to create a new thread here.
I'm using the latest CM v7.0.3 rom and the "connect to pc" menu is missing. No "mount as harddisk", no "charge only". I can not access my SD card from the pc at all. Am I missing something? Reboot and/or connecting and disconnecting my device multiple times to different PCs didn't help either.
Thanks for any help,
- McManiaC
Umm, when you connect your phone via usb to the pc, the usb icon and usb connected msg should popup, slide down the status bar, tap the usb connected notification and then pick turn on usb storage , the phone is already charging when connected to usb so you don't get that charge only option
Well yes, that's what it should be like - but exactly that notification is missing. It's been there in previous versions of CM/HTC Sense, but I don't get that pop-up in the latest CM703...
usb / connect to pc menu missing
i have the same problem on my legend with CM710 stable...
i remember this option was there (and a menu popped up when you plugged it in) but now it is not there anymore and nothing happens when i plug it in (windows: usb dev not recognized, ubuntu doesnt even recognize any usb device)... although the phone continues to charge...
i suspect that i might have done a factory reset or something after which this problem started... (or i may have disassembled the phone to replace the touchscreen/lcd... but has been carefully reassembled and everything else works fine..)
even tried to recover to old backups, flashing the rom again but nothing happens, still no connect to pc menu in settings nor does pluggin it in works...
gonna try to flash a stock froyo rom and see what happens..
if i am missing anything then please let me know...

Can't change usb mode.

Hi,
I seem to be stuck on a silly problem. I don't seem to be able connect to my pc via usb.
It charges and I've got kies installed but I can't find where on the phone to change usb connection mode.
I'm running gingerice.
Any help
tmcthree said:
Hi,
I seem to be stuck on a silly problem. I don't seem to be able connect to my pc via usb.
It charges and I've got kies installed but I can't find where on the phone to change usb connection mode.
I'm running gingerice.
Any help
Click to expand...
Click to collapse
For USB Storage mode:
1. Disconnect
2. Settings->Wireless and network->USB utilities
3. Click button: Connect storage to PC
4. Plug in USB Cable
I hope it helps.
tmcthree said:
Hi,
I seem to be stuck on a silly problem. I don't seem to be able connect to my pc via usb.
It charges and I've got kies installed but I can't find where on the phone to change usb connection mode.
I'm running gingerice.
Any help
Click to expand...
Click to collapse
Do you mean adb connection or usb mass storage one?
I don't know whether you've checked this yet, but try this:
if you mean the adb, on the home screen, press: menu>setting>applications>development>check on usb debugging
if it is usb storage, refer to what mayerkemp said
or if you can see usb logo on notification bar, slide it down and tap connect storage to pc
Thanks guys,
Problem is that when I click on connect storage it either says "connect the cable to use mass storage" or if the cable is connected it says "USB is connected. Remove the cable."
Any thoughts?
Hi guy's, so I've reinstalled a backed up rom and it's fine now.
Just always check development mode on application setting, then u can change to usb storage with tap usb connected from expanded status bar, that's what I do on DXLM3
Sorry for my bad english

[Q] USB stopped working 4.3

Hi all, how are you?
I have a Galaxy Nexus unrooted stock with Android 4.3 (JWR66V).
After the update to 4.3, my device has stopped working in MTP/PTP mode.
I mean, When I connect my phone to my Notebook USB port, thus nothing happens on my notebook or my phone.
When my phone is connected to my notebook the notification dialog to select between MTP/PTP modes doesn`t show up anymore in the phone (it only says that is charging).
I have tried to re-install the drivers on my notebook, and It didn't fix this issue.
I have also tried to the a factory reset on my phone, and It did't fix the issue either.
Besides, I tried also to connect the phone with a different USB cable and it didn't fix the issue either.
Please, May someone help me?
Thanks in advance
Please, May someone help me?
I have no idea of what is going on and why USB stopped working after 4.3 update?
How do I troubleshoot this issue?any clues?
I figure out that on Android 4.3 I have ti go to Settings->Storage->Usb Computer Connection and manually select the connection mode...
(I am not sure Why the notification pop up doesn't show anymore on the phone when I connect it to the PC using the USB cable)
RogerSilva said:
I figure out that on Android 4.3 I have ti go to Settings->Storage->Usb Computer Connection and manually select the connection mode...
(I am not sure Why the notification pop up doesn't show anymore on the phone when I connect it to the PC using the USB cable)
Click to expand...
Click to collapse
You are totally right... dont know the stu... option doesnt appears clear. On my S3 I did the same, but the option wasnt visible... you must click over USB (even it appearing as dimmed) then a USB CONNECTION (or something like) appears you must click over and then a screen with MPT option will be available... For godsake WHY such thing isnt available on settings or on shortcut menu by default is beyond my understanding.

Where is USB Mode MTP/PTP settings?

I used Helium to change to USB PTP mode and now mine tablet isnt recognized when connected to PC. Want to change it back to MTP mode, but I cant find anywhere in the settings to choose betweens USB modes and I just dont know how Helium broiught me there.
So where is this USB mode settings hiding in the settings?
edit:
Managed to change it back to MTP mode, be secret code *#0808# and there are few choice to choose from. I chosed just MTP, but there is also MTP + ADB and does it matter which to choose? Since the tablet is still not recognized when connected to PC as it used to do before?
Also, USB Mode is suppose in storage settings, but there is no ways to access it by just go into storage settings and only through Helium app. How do you enable this hidden settings in Storage?
Normal there should be "3 dots menu" to get there, but there isnt in mine tablet and do Samsung hve removed it or its a bug?
edit2:
Fixed it, by uninstall Helium and few other apps. After reboot and tablet is recognized when connect to pc and got USB mode choice by pulling notification down.
dt33 said:
I used Helium to change to USB PTP mode and now mine tablet isnt recognized when connected to PC. Want to change it back to MTP mode, but I cant find anywhere in the settings to choose betweens USB modes and I just dont know how Helium broiught me there.
So where is this USB mode settings hiding in the settings?
edit:
Managed to change it back to MTP mode, be secret code *#0808# and there are few choice to choose from. I chosed just MTP, but there is also MTP + ADB and does it matter which to choose? Since the tablet is still not recognized when connected to PC as it used to do before?
Also, USB Mode is suppose in storage settings, but there is no ways to access it by just go into storage settings and only through Helium app. How do you enable this hidden settings in Storage?
Normal there should be "3 dots menu" to get there, but there isnt in mine tablet and do Samsung hve removed it or its a bug?
edit2:
Fixed it, by uninstall Helium and few other apps. After reboot and tablet is recognized when connect to pc and got USB mode choice by pulling notification down.
Click to expand...
Click to collapse
How did u dial *#0808# on a tablet?... I am having a issue connecting my tab to a computer. I have no idea where mtp mode is on this thing

[Q] No MTP or PTP options available

Hello, I am new to this form. I flashed with AICP - 3.5 - KK 4.4.2_r2 rom today. and noticed that I do not have MTP or PTP options available. I got to Settings>Storage and couldnt find the 3 dots menu which will have the USB Computer connection settings menu. Please help.
Turn off usb debugging , connect phone to pc.. You will get a notification to turn usb mass storage on.. Click on that notification and turn on usb mass storage...

Categories

Resources