Ok so I know my way around a phone or too so I think this should be obvious but please if you can help me out here. I recently purchased the HTC Surround which I am beyond happy about, fantastic phone. However this seems to be an OS question more than phone.
I haven't found a simple way to have the Silent mode on without going to settings and disabling the Vibrate function. With Vibrate turned on if you hold down the volume key until 0 it switches to vibrate and there is no way of getting to full Silent mode. Can anyone help me with this if I am just missing something obvious here.
Thank you in advance
i don't think there is a silent mode as of yet. also, when you hit volume, you don't have to bring it all the way to 0, you can merely tap the icon on the right and it will flick between ring and viberate. though the problem with doing this i've found is that when you go into a game, the game still utilises the sound which i found a bit strange.
jewill00 said:
Ok so I know my way around a phone or too so I think this should be obvious but please if you can help me out here. I recently purchased the HTC Surround which I am beyond happy about, fantastic phone. However this seems to be an OS question more than phone.
I haven't found a simple way to have the Silent mode on without going to settings and disabling the Vibrate function. With Vibrate turned on if you hold down the volume key until 0 it switches to vibrate and there is no way of getting to full Silent mode. Can anyone help me with this if I am just missing something obvious here.
Thank you in advance
Click to expand...
Click to collapse
It's a bit annoying, but you'll have to go into ringtones and sounds in the settings and turn vibrate OFF. Then, when you go down to 0 it will be silent. You'll have to change vibrate back to ON when you want it back.
is there a way to set text messages and emails to vibrate? i haven't seen this in the emulator.
nat1 said:
is there a way to set text messages and emails to vibrate? i haven't seen this in the emulator.
Click to expand...
Click to collapse
if you set the phone's profile to viberate, it quiets all the OS' built in notifications and typing and that. it does not however quiet apps/games sounds. only way to do that is drop the volume itself.
what i mean is on the normal volume profile can i sent a ring tone for calls, and vibrate for texts and emails?
not at present. it's still very simple on/off stuff for most, hopefully MS really goes through each section of the OS and brings it to the level of what is expected in high end phones.
Not an answer to the ops question, but if you press the down volume button, you can then click the "ring" icon and it will cycle between ring and vibrate (I would have expected silent there too)
Gordon.
Has anyone else noticed volume settings are even worse then they were for ICS? Not only are ringer + notification volumes still linked, Google even linked the system volume to them now as well. And more annoying: how on earth does one disable vibrate for notifications? The only setting to control vibrate I seem to have is "vibrate when ringing" in the sound menu. Unchecking this one does nothing for notifications.
I use Audiomanager Pro for my sound profiles, and the vibrate options you can set for each profile have no effect. The only way to disable vibrate seems to be to enable silent mode. But I don't want that, when I'm at home my GNEX lies on my desk in the room and I simply do not want it to vibrate for ringer & notifications.
Or am I somehow overlooking something really obvious here?
It is a pain in the a$$ but I found a pretty cool solution. Might not be what you were looking for but "easy profiles" in the market will let you unlink all those. It has a 2 week full trial. You can even reinstall the trial again if you want. Plus it allows all kinds of triggers and rules etc. Almost like tasker ... except for notifications.
G-Nexus Sent
So, if you're looking to control the vibrations for each app, any application that supports notifications should have a setting inside it with semi-fine-grain controls for notifications. These controls will generally allow you to specify whether you want a sound or vibration notification, and when to initiate them. For example, in Gmail->settings->[your email]->vibrate & ringtone there is a setting called "vibrate" in which you can specify if you would always like a vibration, only while in silent mode, or never. Hopefully this answers your question.
pinke123 said:
So, if you're looking to control the vibrations for each app, any application that supports notifications should have a setting inside it with semi-fine-grain controls for notifications. These controls will generally allow you to specify whether you want a sound or vibration notification, and when to initiate them. For example, in Gmail->settings->[your email]->vibrate & ringtone there is a setting called "vibrate" in which you can specify if you would always like a vibration, only while in silent mode, or never. Hopefully this answers your question.
Click to expand...
Click to collapse
Thanks for the reply but it doesn't I'm afraid. I know you can control notification settings per app, but doing so for 10+ apps every time I want to temporarily disable notification vibrate sort of defeats the purpose. What I want is a Gingerbread like setting for vibrate for notifications: one setting to disable/enable vibrate for notifications that overrides individual app settings.
I'm beginning to think Google simply does not want to allow such settings any more, but I'm surprised not more users are annoyed by this. Linking volumes was a bad call, but removing control regarding vibrate settings is an even worse one imho.
Petrovski80 said:
Thanks for the reply but it doesn't I'm afraid. I know you can control notification settings per app, but doing so for 10+ apps every time I want to temporarily disable notification vibrate sort of defeats the purpose. What I want is a Gingerbread like setting for vibrate for notifications: one setting to disable/enable vibrate for notifications that overrides individual app settings.
I'm beginning to think Google simply does not want to allow such settings any more, but I'm surprised not more users are annoyed by this. Linking volumes was a bad call, but removing control regarding vibrate settings is an even worse one imho.
Click to expand...
Click to collapse
I just updated my Nexus S to Jelly Bean and was very sad to discover this problem. Previously, I could use Audio Manager Pro to control whether notifications vibrated or not (both with volume on and off). Now, Audio Manager Pro's vibration settings seem to do nothing. I have to go into the individual app's notification settings to choose whether it vibrates or not. As you said, with multiple apps, this is unacceptable.
I emailed the Audio Manager dev to point this flaw out. I'm not sure if it is an unfixable Jelly Bean deficiency or if the Audio Manager app just needs to be updated. But I surely hope it is the latter and not the former.
I have to hand it to RIM... one thing they had right was notifications profiles built into the OS that were vastly superior to anything I've seen on Android or iOS. And the notification LED. It still blows my mind that more Android devices don't have a bright, visible notification LED.
chrikenn said:
I just updated my Nexus S to Jelly Bean and was very sad to discover this problem. Previously, I could use Audio Manager Pro to control whether notifications vibrated or not (both with volume on and off). Now, Audio Manager Pro's vibration settings seem to do nothing. I have to go into the individual app's notification settings to choose whether it vibrates or not. As you said, with multiple apps, this is unacceptable.
I emailed the Audio Manager dev to point this flaw out. I'm not sure if it is an unfixable Jelly Bean deficiency or if the Audio Manager app just needs to be updated. But I surely hope it is the latter and not the former.
I have to hand it to RIM... one thing they had right was notifications profiles built into the OS that were vastly superior to anything I've seen on Android or iOS. And the notification LED. It still blows my mind that more Android devices don't have a bright, visible notification LED.
Click to expand...
Click to collapse
Yes I totally agree regarding the profiles you can set on BlackBerry devices. I also emailed the dev of audiomanager, hopefully the jelly bean API still allows more control over vibrate than the Android settings menu suggests.
Sent from my Galaxy Nexus using Tapatalk 2
AUGH I just clued into this tonight after weeks on JB. I can't find any way to globally disable all vibrations at night. What the hell was Google thinking? Now I might have to put the damn thing on airplane mode just to get some freaking sleep.
Yeah it looks like we need need to live with this or flash a ROM that has modified sound/vibration settings to a normally usable level (read: the Gingerbread implementation).
Sent from my Galaxy Nexus using Tapatalk 2
For now, my compromise is to set Tasker to disable account sync when the phone is both face down and plugged in. Since Gmail is the most common source of vibration, it should do the trick. In the morning when I flipped it over and woke it, my e-mails came in about 5 seconds.
cmstlist said:
For now, my compromise is to set Tasker to disable account sync when the phone is both face down and plugged in. Since Gmail is the most common source of vibration, it should do the trick. In the morning when I flipped it over and woke it, my e-mails came in about 5 seconds.
Click to expand...
Click to collapse
Wtf was Google thinking? First linking ringer and notification volumes. Now making it near impossible to control vibration globally with a profiles app.
Google is really moving backwards in this area and I can think of no reasonable explanation as to why.
Sent from my Nexus S using xda app-developers app
chrikenn said:
Wtf was Google thinking? First linking ringer and notification volumes. Now making it near impossible to control vibration globally with a profiles app.
Google is really moving backwards in this area and I can think of no reasonable explanation as to why.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
Exactly. It's a mystery what problem the Google devs think they needed to fix. Gingerbread handled volumes and vibration just fine. Don't fix what isn't broken.
Sent from my Galaxy Nexus using Tapatalk 2
chrikenn said:
Wtf was Google thinking? First linking ringer and notification volumes. Now making it near impossible to control vibration globally with a profiles app.
Google is really moving backwards in this area and I can think of no reasonable explanation as to why.
Click to expand...
Click to collapse
They were asked about this at Google I/O, supposedly it was too confusing for some users. They basically avoided a response when it was brought up how it is now impossible to set, for example, navigation and music to both have comfortable volumes at the same time. It's like they know it sucks but they still won't fix it, it kind of pissed me off when I was watching it.
pfmiller said:
They were asked about this at Google I/O, supposedly it was too confusing for some users. They basically avoided a response when it was brought up how it is now impossible to set, for example, navigation and music to both have comfortable volumes at the same time. It's like they know it sucks but they still won't fix it, it kind of pissed me off when I was watching it.
Click to expand...
Click to collapse
Would it be possible for a custom ROM, say AOKP or CM10, to revert the vibration and volume behaviours back to being more like they were in GB?
pfmiller said:
They were asked about this at Google I/O, supposedly it was too confusing for some users. They basically avoided a response when it was brought up how it is now impossible to set, for example, navigation and music to both have comfortable volumes at the same time. It's like they know it sucks but they still won't fix it, it kind of pissed me off when I was watching it.
Click to expand...
Click to collapse
Oh I somehow missed that. Bad argumentation imho. If you can understand how 3 volume sliders (ICS/JB) work, you don't suddenly get confused if there are 5 sliders (GB). All this does is annoy people who want to control individual volumes. Restricting them by linking is *not* a usability improvement because it's less confusing.
"Three sliders? Ok, I got it". "Five sliders? ZOMG I'm confused!"
Google should have made it at least possible to unlink in 'advanced settings' or something. Heck I'd be happy to edit a bulky.config file if that would unlink.
cmstlist said:
Would it be possible for a custom ROM, say AOKP or CM10, to revert the vibration and volume behaviours back to being more like they were in GB?
Click to expand...
Click to collapse
AOKP and CM have the volumes unlinked, according to the specs and users on XDA. I'm guessing it's also possible to get the 'old' vibration behavior back as well. However I'm very happy with vanilla android, and flashing a custom rom just to get this one issue fixed always seemed overkill to me. But as soon as CM10 gets in a more stable state, I just might flash it.
turn off vibrate alerts in Jellybean - I fixed it
dunno how I missed something so simple but I service provider was able to help me fix the problem of the vibrate settings being on for all alerts and ringtones. for the ringtone, its in advanced settings and you can uncheck vibrate there. for the other apps, you have to go into the settings via the app not via the phone settings>apps and do it for each app, so for example, I use go chat for text messages, so I had to go into the app itself and then go to its settings and then turn off vibrate, same for email and facebook. and it worked, its fixed.
Yeah but that's still useless for those of us who just want to toggle all vibration at once, especially with an automated program like Tasker.
Sent from my HUAWEI MediaPad using Tapatalk 2
cmstlist said:
Yeah but that's still useless for those of us who just want to toggle all vibration at once, especially with an automated program like Tasker.
Sent from my HUAWEI MediaPad using Tapatalk 2
Click to expand...
Click to collapse
Have you tried Sound Manager from the market? It allows you to set vibrate for all notifications via the advanced menu.
I have to be honest that I only tried this in cm10 and in stock ics. I expect it to work in stock jb too.
Mr_Q said:
Have you tried Sound Manager from the market? It allows you to set vibrate for all notifications via the advanced menu.
I have to be honest that I only tried this in cm10 and in stock ics. I expect it to work in stock jb too.
Click to expand...
Click to collapse
No it does not work in stock JB. CM10 must have put back what Google got rid of. There is no more global vibrate toggle in stock JB.
I'm a little late on this one...
- slide down the "notification bar" from the top
- 3rd icon from the left ("speaker")
- this button has three states (ringtone / no ringtone + vibration / no ringtone + no vibration)
// EDIT
another option:
- keep the power button pressed
- select one of the above mentioned sound options at the bottom
regards,
schemo
schemogroby said:
I'm a little late on this one...
- slide down the "notification bar" from the top
- 3rd icon from the left ("speaker")
- this button has three states (ringtone / no ringtone + vibration / no ringtone + no vibration)
// EDIT
another option:
- keep the power button pressed
- select one of the above mentioned sound options at the bottom
regards,
schemo
Click to expand...
Click to collapse
Sorry what you're describing has nothing to do with the feature Google removed. This is about the ability to globally disable vibration, independently from sound. None of the options you listed include "sound on, vibrate off".
Sent from my Galaxy Nexus using Tapatalk 2
Has anyone experience your Galaxy Nexus automatically changing from Vibrate mode to Silent mode after 1 vibrate and stays in silent mode?
I'm running Jelly Bean 4.1.1 and this is really annoying because if I don't notice the 1 vibration, I'll miss every subsequent notification until I check my phone. Even if I turn the phone on and change it back to vibrate, it will do the same thing again, 1 vibrate from a notification and it will switch to silent mode again.
I have Profile Schedule+ as my profile management app.
If there's any other info I can provide that could help, please let me know! I've tried searching google and XDA but couldn't find any solutions :crying:
Thanks XDA!!
cl0we said:
Has anyone experience your Galaxy Nexus automatically changing from Vibrate mode to Silent mode after 1 vibrate and stays in silent mode?
I'm running Jelly Bean 4.1.1 and this is really annoying because if I don't notice the 1 vibration, I'll miss every subsequent notification until I check my phone. Even if I turn the phone on and change it back to vibrate, it will do the same thing again, 1 vibrate from a notification and it will switch to silent mode again.
I have Profile Schedule+ as my profile management app.
If there's any other info I can provide that could help, please let me know! I've tried searching google and XDA but couldn't find any solutions :crying:
Thanks XDA!!
Click to expand...
Click to collapse
Google changed the vibrate for notifications feature in JB. All profile apps that have options like "disable vibrate for notifications" won't work (I tossed AudioManager out the window). I'd try if vibration behaves well without a profile app.
Is there a way to to disable mute mode on the S3?
I've tried stock and CM10 and have not found such a feature yet. I am often finding my phone muted when I press down volume several times to ensure vibrate mode is on (at least that was my intention and habit).
Thanks.
techphets said:
Is there a way to to disable mute mode on the S3?
I've tried stock and CM10 and have not found such a feature yet. I am often finding my phone muted when I press down volume several times to ensure vibrate mode is on (at least that was my intention and habit).
Thanks.
Click to expand...
Click to collapse
anyone has any ideas on this?
I would love this feature as I hate the phone going into mute mode accidenty where it doesn't vibrate
One way to work around it, is to install an app like Volume Control+ and set a preset/profile and schedule it to set itself every so often.
Hi,
So I've had the phone for a couple days now, and I love it. But today I received the nougat update and I have one little (major) issue:
When in any of the none-silent notification modes, it's set to ringer only. I used to have it on vibrate only, mostly in priority mode with vibrate, so it wouldn't ring. How do I get this back? Putting the volume all the way down doesn't change it to vibrate anymore, and nor does tapping on the actual bell icon.
Thanks
I have the same problem. After update I accidentally turned volume up and now I can't turn it back to vibrate. My level of sound stops at 14% and I can't make it vibrate-only. Any ideas?
Sent from Oneplus 3
Put the alert slider to the top position
RedGoblinz said:
Put the alert slider to the top position
Click to expand...
Click to collapse
This doesn't solve the issue. You still can't have the phone vibrate to only priority notifications.
With the slider on the top position (with vibration enabled in the settings) the phone will vibrate for every notification. And if you want to switch to a "drop dead" mode with no notifications at all you would always need to go in the settings to change the vibration option of the silent profile.
Major step back by oneplus.
I want that exact same thing too. So:
Silent - silence all except alarm (with option to vibrate)
Do not disturb - all the current options + option to vibrate for the ones enabled and no sound
Ring - standard mode. Sound for all + option to vibrate.
It's strange that they've missed such a common feature.
The functionality is moved to slider now. Turn the slider all the way up to silent mode and press the grear icon to select the vibration option.
Easy. Love it much more now.
Sent from my ONEPLUS A3003 using Tapatalk
Such a glaring omission by OnePlus.
I have solved the problem by installing Ringer Modes. This app allows you to put a tile in your quick settings that will change ring modes, including Vibrate mode!
https://play.google.com/store/apps/details?id=com.cgollner.quicktiles
Dekz said:
Such a glaring omission by OnePlus.
I have solved the problem by installing Ringer Modes. This app allows you to put a tile in your quick settings that will change ring modes, including Vibrate mode!
https://play.google.com/store/apps/details?id=com.cgollner.quicktiles
Click to expand...
Click to collapse
That's not an omission. That's how it's meant to be in Nougat update. Now people will actually use the Alert Slider more often.
Personally, I love this implementation much more than before.
Sent from my ONEPLUS A3003 using Tapatalk
abobobilly said:
The functionality is moved to slider now. Turn the slider all the way up to silent mode and press the grear icon to select the vibration option.
Easy. Love it much more now.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
This seems to be terrible functionality to me. With my old Nexus phone all I needed to do was 1) Hold the Volume Down button and it would go into vibrate only mode. All it took was one button click. Now you are saying I need to: 1) Move the Alert Slider 2) Click the gear 3) Enable vibration 4) Exit out of settings page to continue what I was doing.
Four steps whereas before it only took one. That is a enormous step back in functionality in my mind.
fstbck6706 said:
This seems to be terrible functionality to me. With my old Nexus phone all I needed to do was 1) Hold the Volume Down button and it would go into vibrate only mode. All it took was one button click. Now you are saying I need to: 1) Move the Alert Slider 2) Click the gear 3) Enable vibration 4) Exit out of settings page to continue what I was doing.
Four steps whereas before it only took one. That is a enormous step back in functionality in my mind.
Click to expand...
Click to collapse
You only have to do it once, brother Once the slider is set to vibrate on silent mode, you only have to touch the slider. It's quicker than 'holding' the volume button.
Cheers.
Sent from my ONEPLUS A3003 using Tapatalk
Actually, you're right. I just tried that and it works. Now that I think about it I'm not sure why I originally assumed I'd need to select vibrate every single time.
Not bad at all just a little different than I'm used to.
I don't understand the functionality, can you explain again?
When i have vibration enabled in silent mode, how do i quickly enable and disable vibration? (before all I had to do was move the slider)
I think LOS roms still have the feature that you need