hello.
so, if I recently flashed a custom kernel (franco) by installing from .zip through cwm, and I wanted to restore the stock jb kernel,
do i just restore the boot.img on cwm or do i have to restore system.img (or any other image) as well?
thanks!
Only boot.img
Sent from my Galaxy Nexus using xda premium
zephiK said:
Only boot.img
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
thanks! i was just confused because there were other files in franco's .zip besides the boot.img and was wondering what those were for? do they change anything else?
or reflash your JB rom
maatae said:
thanks! i was just confused because there were other files in franco's .zip besides the boot.img and was wondering what those were for? do they change anything else?
Click to expand...
Click to collapse
they are apart of the modifications that franco did (such as the sdcard binary)
but +1 to what acloh said... best thing to do is just reflash the base ROM. if gapps are needed then flash gapps right after you flash the ROM as well.
zephiK said:
they are apart of the modifications that franco did (such as the sdcard binary)
but +1 to what acloh said... best thing to do is just reflash the base ROM. if gapps are needed then flash gapps right after you flash the ROM as well.
Click to expand...
Click to collapse
I see. Thanks! Stupid question...how do you reflash stock rom? I tried installing the original ota zip i used updating takju to jb but got a status 7 error. As of now I've just done a full restore of a cwm backup I did right before flashing Franco. Help?
maatae said:
I see. Thanks! Stupid question...how do you reflash stock rom? I tried installing the original ota zip i used updating takju to jb but got a status 7 error. As of now I've just done a full restore of a cwm backup I did right before flashing Franco. Help?
Click to expand...
Click to collapse
You should always look inside the kernel zip and see what files it's going to modify. Then back up those files before flashing it.
If you've restored your nandroid (pre-franco), then you should be good to go for the OTA (assuming you didn't change anything else...)
efrant said:
You should always look inside the kernel zip and see what files it's going to modify. Then back up those files before flashing it.
If you've restored your nandroid (pre-franco), then you should be good to go for the OTA (assuming you didn't change anything else...)
Click to expand...
Click to collapse
so even if I'm already on the version I want (4.1.1) after the restoration, I should still reinstall the takju4.0.4 ->4.1.1 OTA.zip?
Also, are there any recommended caches I should clear after changing kernels?
Thank you.
maatae said:
so even if I'm already on the version I want (4.1.1) after the restoration, I should still reinstall the takju4.0.4 ->4.1.1 OTA.zip?
Also, are there any recommended caches I should clear after changing kernels?
Thank you.
Click to expand...
Click to collapse
?? Not sure I understand. If you restored 4.1.1, then you obviously do not need any update.
No, you don't have to wipe any caches.
efrant said:
?? Not sure I understand. If you restored 4.1.1, then you obviously do not need any update.
No, you don't have to wipe any caches.
Click to expand...
Click to collapse
Ok, thank you. I guess my main question was whether or not I have to wipe caches in between kernel switches. Again, Thanks!
Related
I've never used an AOSP ROM before, but now I am currently on AOKP. When I want to update to a newer version, do I still need to flash gapps after flashing the update? I assume I have to reflash the kernel as well if I use one different than the one included with the ROM?
You need to flash GApps straight away after if you are wiping your device. You also need to reflash the kernel of choice after. Good luck.
jd1001 said:
You need to flash GApps straight away after if you are wiping your device. You also need to reflash the kernel of choice after. Good luck.
Click to expand...
Click to collapse
Only wiping I would do would be cache and dalvik since I am merely upgrading the ROM version, eg nightly 19 to nightly 20. Would that still involve flashing gapps?
edgeicator said:
Only wiping I would do would be cache and dalvik since I am merely upgrading the ROM version, eg nightly 19 to nightly 20. Would that still involve flashing gapps?
Click to expand...
Click to collapse
Yes
10char.
You shouldn't have to reflash GAPPS if you are just updating..
2 separate answers. Anyone else want to chime in?
You have to ref lash the kernel because flashing a rom flashes the from kernel. I've never had to flash gapps on any device if going from an old build of a rom to a new one unless specifically stated.
Sent from my Galaxy Nexus using xda premium
edgeicator said:
2 separate answers. Anyone else want to chime in?
Click to expand...
Click to collapse
Just think about it. It depends on how you flash and if you flash an update.zip if that zip wipes existing data or just adds to it.
For a sure answer you would need to say what method is used and how the update edify script in the zip looks like.
Now for someone how knows the rom you're talking about in detail and what files are provided there might be a clearer answer, but not every poster does know such details^^
The answer is no, if you just update a rom without wipe, you dont need to flash gapps. This type of rom update keeps all your data in tact anyway so of course no need to flash extra.
This is a full flashable build of 4.0.4 AOSP I compiled myself.
There are absolutely no tweaks of any kind, this is full stock.
Download
You can download it here: https://faramir.eriador.org/r/full-maguro-ota-en.4.0.4.zip
Installation
It can be installed with CWM.
Wipe
You should not need to wipe (except maybe cache). That said if you have weird issues, like accounts not syncing, try wiping.
I installed it over CM9 without wiping, but your mileage may vary.
If you come from pre 4.0.3 ROMs, please wipe.
Google Apps
gapps are not installed, so you will have to flash them too. You can use my mirror at https://faramir.eriador.org/r/gapps-ics-20120317-signed.zip
Please prefer the version of google apps you were already using, otherwise you will more than probably need a wipe.
Root
Note that this is stock, hence there is no superuser, you will have to install superuser and su by hand like on a stock rom.
Here is a mirror for it: https://faramir.eriador.org/r/su_ICS_GN.zip
Kernels
It should be compatible with all 4.0.3 custom kernels although I only tested FuguMod (http://forum.xda-developers.com/showthread.php?t=1438417)
RECOVERY WARNING
This is full stock, which means if you keep the original kernel, it will reflash stock recovery at first boot.
nikademus said:
Hello,
I just compiled 4.0.4 AOSP
You can download it here: https://faramir.eriador.org/r/full-maguro-ota-en.4.0.4.zip
It can be installed with CWM.
You should not need to wipe (except cache).
gapps are not installed, so you will have to flash them too.
Note that this is stock, hence there is no superuser.
It should be compatible with all 4.0.3 custom kernels although I only tested FuguMod.
Click to expand...
Click to collapse
So is it completely stock i.e stock kernel etc? basicly just an ota but not an ota if you get me?
p.s first haha
leelaa said:
So is it completely stock i.e stock kernel etc? basicly just an ota but not an ota if you get me?
Click to expand...
Click to collapse
Yes, it's fully stock, the google way
Real OTA image from google is not available yet, so this is what looks like it the most.
It's mainly for those who want to have real 4.0.4 now without waiting and without losing CWM or making a wipe.
Thanks thats what i want, good job
nikademus said:
Yes, it's fully stock, the google way
Real OTA image from google is not available yet, so this is what looks like it the most.
It's mainly for those who want to have real 4.0.4 now without waiting and without losing CWM or making a wipe.
Click to expand...
Click to collapse
how about losing CWM after making a full wipe
how can i go back to restoring a nandroid backup mate?
thx for help
i only have 3e recovery with the belly-up android...
I just flashed this and lost CWM and have no Gapps.. my Signal bars stay grey and don't turn cyan (blue) even though I know.I'm in an area I get perfect service.
Sorry can't see any changes. Same sh#@% defrent day.
klone96 said:
I just flashed this and lost CWM and have no Gapps.. my Signal bars stay grey and don't turn cyan (blue) even though I know.I'm in an area I get perfect service.
Click to expand...
Click to collapse
As I posted in the OP, you need to flash gapps. It's forbidden to distribute them (at least included in a ROM).
klone96 said:
I just flashed this and lost CWM and have no Gapps.. my Signal bars stay grey and don't turn cyan (blue) even though I know.I'm in an area I get perfect service.
Click to expand...
Click to collapse
How did you flash the ROM?
I also flashed it together with Gapps, su and FuguMod R200.
I didn't loose recovery and also I can connect without any issues on Wifi and mobile data.
zurchpet said:
How did you flash the ROM?
I also flashed it together with Gapps, su and FuguMod R200.
I didn't loose recovery and also I can connect without any issues on Wifi and mobile data.
Click to expand...
Click to collapse
he probably wiped full like me and also forgot to download SU (from the other thread), gapps and optional kernel
zurchpet said:
How did you flash the ROM?
I also flashed it together with Gapps, su and FuguMod R200.
I didn't loose recovery and also I can connect without any issues on Wifi and mobile data.
Click to expand...
Click to collapse
I flashed in cwm and flashed the gapps but I guess it didn't take bcuz I don't see them I'm no where near a laptop so I'm guessing I'm screwed untill I root/flash recovery??
I have put links to gapps and su in the OP
Soo.. is it best to just wait for another stock rom with a kernel that has a recovery... or just flash this?
This rom will not overwrite existing recovery partition.
Sent from my Full AOSP on Maguro using Tapatalk
YoungAceAtlanta said:
Soo.. is it best to just wait for another stock rom with a kernel that has a recovery... or just flash this?
Click to expand...
Click to collapse
You can flash FuguMod before booting, it will not wipe your recovery.
The problem is within the init.rc:
Code:
service flash_recovery /system/etc/install-recovery.sh
class main
oneshot
This is stock behavior.
Hey guys can I flash this over the AOKP Mod I have installed? If so, how?
I do not find meaningful replace the stock ... what's the point? Then, after a day or puts the CM9 o another aopk ..... mistake?
sago62 said:
I do not find meaningful replace the stock ... what's the point? Then, after a day or puts the CM9 o another aopk ..... mistake?
Click to expand...
Click to collapse
I will probably stay on that ROM and not flash any AOKP or so. It has all I need.
Joshaldo said:
Hey guys can I flash this over the AOKP Mod I have installed? If so, how?
Click to expand...
Click to collapse
I have flashed it over CM9 nightly without any wipe needed.
sago62 said:
I do not find meaningful replace the stock ... what's the point? Then, after a day or puts the CM9 o another aopk ..... mistake?
Click to expand...
Click to collapse
please talk english to us! thanks!
I have never flashed any kernels, just custom roms. From what I have read it goes down the same way, just flash the zip from SD in recovery and wipe cache. Correct?
Also, if I want to go back to stock kernel can I flash back to a JOP40C ( this one http://forum.xda-developers.com/showthread.php?t=1992483 ) even though my build is JOP40D ?
Robert00001 said:
I have never flashed any kernels, just custom roms. From what I have read it goes down the same way, just flash the zip from SD in recovery and wipe cache. Correct?
Also, if I want to go back to stock kernel can I flash back to a JOP40C ( this one http://forum.xda-developers.com/showthread.php?t=1992483 ) even though my build is JOP40D ?
Click to expand...
Click to collapse
just flash it in your recovery(if its a flashable zip). dont wipe a single thing, dalvik and cache have nothing to do with kernels. worst case scenario, it doesnt boot. then just reflash your rom in your recovery to fix it.
simms22 said:
just flash it in your recovery(if its a flashable zip). dont wipe a single thing, dalvik and cache have nothing to do with kernels. worst case scenario, it doesnt boot. then just reflash your rom in your recovery to fix it.
Click to expand...
Click to collapse
Ok thanks. Yes its a flashable zip, im going for the franco kernel.
Robert00001 said:
Ok thanks. Yes its a flashable zip, im going for the franco kernel.
Click to expand...
Click to collapse
franco is a good kernel. but most his kernels are in a img form, need fastboot for that. if its a zip, then flash it in your recovery, dont wipe a thing.
simms22 said:
franco is a good kernel. but most his kernels are in a img form, need fastboot for that. if its a zip, then flash it in your recovery, dont wipe a thing.
Click to expand...
Click to collapse
Yes I am sure this is a flashable zip. I found the img files and the zip files on the franco thread.
What about going back to stock? I just want to know if something goes wrong. Does flashing my rom get me the stock kernel back?
Robert00001 said:
Yes I am sure this is a flashable zip. I found the img files and the zip files on the franco thread.
What about going back to stock? I just want to know if something goes wrong. Does flashing my rom get me the stock kernel back?
Click to expand...
Click to collapse
It gets you whatever kernel was originally in the ROM.
063_XOBX said:
It gets you whatever kernel was originally in the ROM.
Click to expand...
Click to collapse
Okay thanks for the replies.
Robert00001 said:
Ok thanks. Yes its a flashable zip, im going for the franco kernel.
Click to expand...
Click to collapse
Even the .IMG files are easy enough to handle, OK so perhaps it might cost you a little money but within the Franco app (I don't know about others as not tried them) but you can simply just choose to restore a .IMG kernel file be it stock (which I have a copy of if you wanted it?) So you can swap and change as you wanted and the plus side of flashing this way is that you avoid the long reboot time dues to catch building again due to ram disk changes. I really think this is the best way of flashing kernels and certainly the easiest way if you wanted to carry on back to the OTA update route from Google.
For instance, I'm running stock takju rom 4.2.1 rom with Franco kernel and I have the stock boot loader and baseband and recovery and to install an OTA I just need to delete just one file and restore back to stock kernel that OTA update will install without troubles
Sent from my Galaxy Nexus
[Q] what‘s rom-aokp kernel for?and how to flash AOKP into my cell?online waiting
4.1.1 stock rom rooted
can anyone tell me who to get AOPK into my i747m
You need to use the search feature buddy.
If you can root your phone you can find a ROM.
And if you have no idea what a kernel or a ROM and which goes with what, I'd suggest staying away from flashing for now and look up tutorials and videos.
Sent from my SAMSUNG-SGH-I747 using Forum Runner
jayRokk said:
You need to use the search feature buddy.
If you can root your phone you can find a ROM.
And if you have no idea what a kernel or a ROM and which goes with what, I'd suggest staying away from flashing for now and look up tutorials and videos.
Sent from my SAMSUNG-SGH-I747 using Forum Runner
Click to expand...
Click to collapse
i used the TOOLKIT stuff to get my phone rooted..
is the kernel a essential thing for AOKP? i have already downloaded the ROM. any possibility to get AOKP by using "zip from card" directly?
thanks for your reply by the way.
raylzq.cn said:
i used the TOOLKIT stuff to get my phone rooted..
is the kernel a essential thing for AOKP? i have already downloaded the ROM. any possibility to get AOKP by using "zip from card" directly?
thanks for your reply by the way.
Click to expand...
Click to collapse
Every rom comes with a kernel built in.
You need a custom recovery for your phone (Clockwork Mod or TWRP)
In recovery factory reset, wipe cache, wipe dalvik, format system, flash rom, flash gapps (Google apps needed) wipe cache and dalvik again and reboot.
If any of this seems overwhelming read read read. Watch a YouTube video on installing a recovery for your phone. Or a video on flashing a rom.
Phones are bricked by not understating what they are doing and downloading the wrong files.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Check out the link in my signature. Cheers
KorGuy123 said:
Every rom comes with a kernel built in.
You need a custom recovery for your phone (Clockwork Mod or TWRP)
In recovery factory reset, wipe cache, wipe dalvik, format system, flash rom, flash gapps (Google apps needed) wipe cache and dalvik again and reboot.
If any of this seems overwhelming read read read. Watch a YouTube video on installing a recovery for your phone. Or a video on flashing a rom.
Phones are bricked by not understating what they are doing and downloading the wrong files.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
my kernel version is 3.0.31-538866.andriod version is 4.1.1 phone already rooted with TWRP and all kinds of backups
the rom package([ROM] AOKP(Jellybean 4.2.2 )Task650) and gapps are already be downloaded to my pc
so what is my next step?
do i need to upgrade my kernel or flash some kind of kernel in before?
thanks for your reply
xBeerdroiDx said:
Check out the link in my signature. Cheers
Click to expand...
Click to collapse
thanks dude.i will.
The rom comes packaged with a kernel. Follow the flash procedures on my link to install the rom and gapps. This will wipe the phone so be prepared. You said you already made a nandroid in recovery, right?
xBeerdroiDx said:
The rom comes packaged with a kernel. Follow the flash procedures on my link to install the rom and gapps. This will wipe the phone so be prepared. You said you already made a nandroid in recovery, right?
Click to expand...
Click to collapse
yeah
the recovery is TWRP and i back everything even the cache up
is that a right move?
raylzq.cn said:
yeah
the recovery is TWRP and i back everything even the cache up
is that a right move?
Click to expand...
Click to collapse
As long as you made a backup in twrp, you should be all set to go ahead and wipe and flash
Be sure to have the rom and gapps zips placed on your phone before starting.
xBeerdroiDx said:
As long as you made a backup in twrp, you should be all set to go ahead and wipe and flash
Be sure to have the rom and gapps zips placed on your phone before starting.
Click to expand...
Click to collapse
does it mean that i can go back to the stock rom anytime with my apps in it as long as i have a backup ?even i do the wipes?
raylzq.cn said:
does it mean that i can go back to the stock rom anytime with my apps in it as long as i have a backup ?even i do the wipes?
Click to expand...
Click to collapse
When you wipe, you're essentially creating a clean slate for your new operating system to run on. Making a backup will allow you to restore your device in the event you run into any issues in the future. The backup will restore whatever rom you were running when you created the backup. For example, the backup you already made, when restored, will place touchwiz (stock) back on your phone. Once you flash a rom, if you were to make a backup again, it would backup your system with that particular rom. Then you would have 2 backups: 1 that has stock and 1 that has aokp or whatever it was you were running at the time of backup.
You can also copy and paste these backups onto your computer to have in case anything ever happens to your phone.
I would read up on all these processes and procedures a little more before you begin.
xBeerdroiDx said:
When you wipe, you're essentially creating a clean slate for your new operating system to run on. Making a backup will allow you to restore your device in the event you run into any issues in the future. The backup will restore whatever rom you were running when you created the backup. For example, the backup you already made, when restored, will place touchwiz (stock) back on your phone. Once you flash a rom, if you were to make a backup again, it would backup your system with that particular rom. Then you would have 2 backups: 1 that has stock and 1 that has aokp or whatever it was you were running at the time of backup.
You can also copy and paste these backups onto your computer to have in case anything ever happens to your phone.
I would read up on all these processes and procedures a little more before you begin.
Click to expand...
Click to collapse
i think i can finally make a move now.thank you for your patience.wish me good luck:victory::victory:
Currently running on AOKP OTA ver. 3.2
I would like to have someone who can guide me slowly step by step carefuly to whatever better option there is.
I been having lots of troubleshooting with phone not responding how it should and I have to keep rebooting to often.
I appreciate your help.
Thank you
Since you're running a custom rom, you could update your recovery to the latest CWM or TWRP and flash a different or updated rom.
Could you help me to do that?
Just guide me step by step.
Ok I already did a backup.
What custom recovery are you running? The first thing would be to get the latest img for your custom recovery and install it.
How did you root and install a custom recovery on your phone?
I am running AOKP OTA Ver. 3.2
That time I did it following a step by step guide with someone who was guiding me.
Hmm what else would you like to know?
That's the OS. What program did you use to backup your rom?
audit13 said:
That's the OS. What program did you use to backup your rom?
Click to expand...
Click to collapse
Oh…sure sure.
One I use is Team Win Recovery Project v2.4.1.0
You should update to the latest TWRP from here: http://teamw.in/project/twrp2/104
You can flash it using Odin. Make a full backup using the new TWRP. Find a rom you want to try, save it to the phone, and flash it using the ypdated TWRP. Don't forget to wipe the phone before changing ROMs.
audit13 said:
You should update to the latest TWRP from here: http://teamw.in/project/twrp2/104
You can flash it using Odin. Make a full backup using the new TWRP. Find a rom you want to try, save it to the phone, and flash it using the ypdated TWRP. Don't forget to wipe the phone before changing ROMs.
Click to expand...
Click to collapse
Ok So I delete the older TWRP get the new one.
Then back and wipe which of all the options?
And of course if I was using AOKP which I really liked, what will your recommend me?
Installing the latest version of TWRP will overwrite the version on your phone.
Install the newest version of TWRP, create a backup of your rom using the new version of TWRP, find a rom you like, copy the ROM to your phone, boot into TWRP, wipe cache, dalvik, data, flash the ROM, reboot.
audit13 said:
Installing the latest version of TWRP will overwrite the version on your phone.
Install the newest version of TWRP, create a backup of your rom using the new version of TWRP, find a rom you like, copy the ROM to your phone, boot into TWRP, wipe cache, dalvik, data, flash the ROM, reboot.
Click to expand...
Click to collapse
Ok perfect!
Thank you very much sir.
I will let you know when I'm done.
audit13 said:
Installing the latest version of TWRP will overwrite the version on your phone.
Install the newest version of TWRP, create a backup of your rom using the new version of TWRP, find a rom you like, copy the ROM to your phone, boot into TWRP, wipe cache, dalvik, data, flash the ROM, reboot.
Click to expand...
Click to collapse
Ok next is to find a nice rom, Any suggestions? (S3rx or SlimBean) keep in mind my device is an i747
Also do I use my computer to download the rom or should I use my phone directly?
I decided to go with Hyperdrive RLS16
Currently downloading it.
Will be flashing soon.
Harkadenn said:
Ok perfect!
Thank you very much sir.
I will let you know when I'm done.
Click to expand...
Click to collapse
Make sure to backup your apps with Titanium Backup.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
juanhbk1 said:
Make sure to backup your apps with Titanium Backup.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you for the warning.
Will do for the future.
Harkadenn said:
Ok next is to find a nice rom, Any suggestions? (S3rx or SlimBean) keep in mind my device is an i747
Also do I use my computer to download the rom or should I use my phone directly?
I decided to go with Hyperdrive RLS16
Currently downloading it.
Will be flashing soon.
Click to expand...
Click to collapse
You can download it directly to your computer and use Windows Explorer to copy it to a microSD card or directly to your phone. It's probably quicker to download a few to your computer and transfer them all at once so you can try different ones.
Have fun flashing ROMs.
audit13 said:
You can download it directly to your computer and use Windows Explorer to copy it to a microSD card or directly to your phone. It's probably quicker to download a few to your computer and transfer them all at once so you can try different ones.
Have fun flashing ROMs.
Click to expand...
Click to collapse
Ok as I extract the rom to my external sd card of my phone it's asking me many permissions such as:
"Do you want to copy Cesium.ogg to your device?
Your device might not be able play or view this file."
I said yes to skip all of the next warnings because every time i hit yes comes another warning.
Also strangely the rom took forever to download and the extraction is also taking way to long.
I didn't had to go through so much stuff by that time I downloaded AOKP rom. :/
Still extracting as I update this post... Something is not right...
I will have to cancel this.
It's stuck.
Do not extract the files. Just flash the zip.
audit13 said:
Do not extract the files. Just flash the zip.
Click to expand...
Click to collapse
Ah, to late I'm currently trying to find the right download link for Slim Bean rom.
Mind if you help me here?
My device is an I747.
UPDATE:
I believe is this one?
http://www.slimroms.net/index.php/d...o/6801-slim-d2att-4-3-build-2-2-official-1738
UPDATE!!
Yup it's done.
Thank you very much for your patience.
Quick question.
How do I restore all my phone data such as my contacts numbers and messages from the back up I did with the other rom?
Do I just restore the last backup and it should recognize the new rom?
UPDATE!
So it went back to where it was of course.
How should I back it all up and restore in the new rom?
Looks right. I have an i747m, not the i747.