Skinomi TechSkin Screen Protector thoughts? - Galaxy S III Accessories

what are your thoughts on the Skinomi TechSkin™ Samsung Galaxy S III Screen Protector?
I am interested mainly in:
1. Is it perfectly CLEAR? I don't want any orange peel effect or other artifacts.
2. Do the fingers slide decently on the screen with the protector on?
3. Does it fit the screen nicely?
Thanks!

1. Is it perfectly CLEAR? I don't want any orange peel effect or other artifacts. No, but it's pretty good. I installed 2 of them last week and there are spots that have more haze than elsewhere. There is some orange peel effect but it's not noticeable, nor are the aforementioned spots, when looking straight on.
2. Do the fingers slide decently on the screen with the protector on? Finger resistance is minimal and they slide nicely.
3. Does it fit the screen nicely? Mine fit pretty good. The cutouts line up well and there's about a 1 mm gap at the edges. I believe some folks have posted that the edges started to lift due to the curved screen at the edges but I'm not see that, yet.
One thing I would do next time is wear latex gloves to eliminate fingerprints. I followed the installation directions and sprayed my hands but still wound up with a few minor prints. The good news is that you need a flashlight to see them and know where to look. They are not visible when using the phone.

1. Yes
2. Yes
3. Yes
Took a day for hazyness under the protector to dry and get outta there, since then it's been crystal clear.

The only real downside so far is you can't use it with TPU cases. The skin covers 99% of the glass so TPU cases cause it to peel at the edges.
I'm not sure if I should look for a new case or a new screen protector. I wanted the protection from the lip on the front of TPU cases. Now I'd have to get a hybrid case to keep the Skinomi or get a protector like SGP ultra nano to use my case.
Sent from my SGH-T999 using Tapatalk 2

AvatarOfFrost said:
what are your thoughts on the Skinomi TechSkin™ Samsung Galaxy S III Screen Protector?
I am interested mainly in:
1. Is it perfectly CLEAR? I don't want any orange peel effect or other artifacts.
2. Do the fingers slide decently on the screen with the protector on?
3. Does it fit the screen nicely?
Thanks!
Click to expand...
Click to collapse
I got in on the $3 deal so I'll give my opinion w/ no buyers remorse.
1. It's not perfectly clear. Almost no wet protectors short of maybe Zagg HD (that has its own problems) will be clear. I had a few indents after the install, even though I installed it with uttermost care.
ALL wet protectors I've seen produce a rainbow effect on a white screen. This is where the display glitters as you change your view angle.
2. Fingers slide about 90% as nicely as standard.
3. The fit is pretty good. It doesn't go completely to the edge, maybe a mm or two from it. Basically about 95-98% screen coverage.
I took the Skinomi off and threw it away because it kept peeling up with my Diztronic case. One or the other had to go, and I like the Diztronic better. It adds a lip around the camera and screen, so if I put my phone upside down, I don't have to worry about screen scratches (this is where 80% of scratches on my last Gorilla Glass phone came from, putting the phone screen-side down).
My friend has a BestSkinsEver wet protector, it goes 100% to the edges, so my Diztronic didn't peel his up (at least not initally).

Related

Spigen SGP Screen Protector and Skinomi DryTech HTC One X Skin Protector

So i just received my Spigen SGP Anti-fingerprint ultra fine screen protector and Skinomi DryTech HTC One X Skin protector today.
For those thinking of getting both or either one of these, here are my first impression...
I'm returning the Skinomi DryTech, doesn't fit right. The cutout for the rear 5-pin and speaker holes doesn't fit properly. It covers one of the gold pins and part of the speaker holes. The camera cutout a bit too big. Maybe i'm just too fussy, but i'm so used to BestSkinsEver type of fit, very minimal gaps and very close precise fit. Guess i'll have to wait for BSE to come out with HOX skins. I've given up on Invisibleshield ever since they added Zagg to their name, quality just wasn't the same.
Next, Spigen SGP Anti-Fingerprint Ultra fine Screen Protector Steinheil enhanced optical hard coated film. It doesn't cover the whole screen just the middle flat part. Although i'm not really happy with the fit, i'm keeping them until i find a better alternative.
I'll try post some pics, but the only camera i have now is the HOX camera..
update (12th May 2012):
Received the replacement full body skin from Skinomi, fits better but still not aligned 100% so they sending me another replacement.
Decide to try the Skinomi's DryTech Screen protector that came with the full body kit.. it fits to the edges of the curved surface, slightly rubbery feel, but not as bad as other skins i've tried. few micro bubbles right after installation, seems like the bubbles slowly disappearing. Will try it out a few weeks and update my views.
I don't think we'll ever find a traditional type of screen protector to cover the screen 100% because of the curvature of the edges. Best coverage would be from a flexible wet application screen protector ala BSE or IS. Downside would be the sticky orange peel texture.
I also received my SGP Ultra Fine Screen Protector today. I'm not opening it or keeping it. It has a matte appearance which isn't for me. I'll have to sell it on eBay or something. How much should I ask for?
scotty2012 said:
I also received my SGP Ultra Fine Screen Protector today. I'm not opening it or keeping it. It has a matte appearance which isn't for me. I'll have to sell it on eBay or something. How much should I ask for?
Click to expand...
Click to collapse
I think u can return them for a full refund if u haven't opened it.
I'm thinking of getting Seidio Ultimate Screen Guard - Fingerprint Reducing and HD.
http://www.seidioonline.com/htc-one-x-fingerprint-reducing-and-hd-screen-guard-p/spm3htnxl-2.htm
According to the product description:
- Covers the front face of your device, including the screen and the proximity sensor with cut-outs for the home button, speaker and camera
I've listed it on eBay here
cyben76 said:
I'm returning the Skinomi DryTech, doesn't fit right. The cutout for the rear 5-pin and speaker holes doesn't fit properly. It covers one of the gold pins and part of the speaker holes. The camera cutout a bit too big. Maybe i'm just too fussy, but i'm so used to BestSkinsEver type of fit, very minimal gaps and very close precise fit. Guess i'll have to wait for BSE to come out with HOX skins. I've given up on Invisibleshield ever since they added Zagg to their name, quality just wasn't the same.
Click to expand...
Click to collapse
I think Skinomi has acknowleged that some of their screen protectors don't fit the back see here:
http://forum.xda-developers.com/showpost.php?p=25267093&postcount=97
Apparantly after emailing them, Azzatar has been sent a replacement that should fit better. I'd try that.
digitalallstar said:
I don't think we'll ever find a traditional type of screen protector to cover the screen 100% because of the curvature of the edges. Best coverage would be from a flexible wet application screen protector ala BSE or IS. Downside would be the sticky orange peel texture.
Click to expand...
Click to collapse
^^this
only a wet applicating one is gonna cover close to 100% of the screen
Just to add the SGP doesn't even cover 100% of the flat part. Top to bottom acceptable, though there is a slight gap of about 1mm. Side coverage it only covers the part of the screen where the LCD is, with about 8mm gap, 4mm on each side before the glass starts to curve.
Hard to prove my point when i can't take a pic...
cyben76 said:
Just to add the SGP doesn't even cover 100% of the flat part. Top to bottom acceptable, though there is a slight gap of about 1mm. Side coverage it only covers the part of the screen where the LCD is, with about 8mm gap, 4mm on each side before the glass starts to curve.
Hard to prove my point when i can't take a pic...
Click to expand...
Click to collapse
I think it's less noticeable if the protector dimensions are perfectly aligned with the LCD, the edge disappears when the phone is on, but very obvious when the phone is off. My wife has a Optimus 2X, which has a even wider curved bezel, and the screen protector is sized exactly to the display also.
I agree with the others that hard screen protectors won't fit to the edge of glass, unless they come pre-molded to the screen curvature, and this might not be possible with this type of material.
Anyone tried these guys:
http://www.ebay.co.uk/sch/i.html?_n...ll+body&_osacat=0&_trksid=p3286.c0.m270.l1313
Those who wish to see the problem i have with Skinomi Drytech Skin can check this thread:
http://forum.xda-developers.com/showthread.php?t=1622123
Apparently same prob with Zagg InvisibleShield, i don't have a camera other then that on my HOX so i use other people pics... hhehe
Spigen faq page for the screen protectors
Why is the HTC One X Steinheil Series cut smaller than the display size?
Due to the curved screen of the HTC One X, dry application films cannot adhere to curved edges. Over time, the edges will bubble and attract dust and lint which will ultimately make the screen protector unusable. Cutting the screen protector to fit the maximum display area that is not curved ensures that the screen protector will protect your device's display longer without bubbling.
expertzero1 said:
Spigen faq page for the screen protectors
Why is the HTC One X Steinheil Series cut smaller than the display size?
Due to the curved screen of the HTC One X, dry application films cannot adhere to curved edges. Over time, the edges will bubble and attract dust and lint which will ultimately make the screen protector unusable. Cutting the screen protector to fit the maximum display area that is not curved ensures that the screen protector will protect your device's display longer without bubbling.
Click to expand...
Click to collapse
yup, but never expected it to cover such a small surface area. Thought it would at least cover till the edge just before the curve surface starts.
Sent from my HTC One X using XDA
cyben76 said:
yup, but never expected it to cover such a small surface area. Thought it would at least cover till the edge just before the curve surface starts.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
+1
This is exactly what I have found with screen protectors that I have bought from eBay. They are far too narrow and am quite sure that making them wider would not adversely effect it.
It seems that there is a 'single manufacturing standard size' template, which then the majority of companies have adopted to base their One X screen protectors on.
I had SGP screen protector, it only covered the visible part of the screen. I ordered Skinomi DryTech at the same time, but the full body skin did not fit well. I used the SGP got about 2 weeks, then just today decided to installs the Skinomi DryTech screen protector, it fits the screen right to the edges. It feels slightly rubbery, but not as bad some of the previous ones I had, the orange peel is not that obvious. Just fresh instal there are a few micro bubbles, I'll wait few days and see how it .
As for the Skinomi full body skin, I'm still waiting for a 2nd replacement, the first replacement did not fit that good as well.
Sent from my HTC One X using XDA
Guys did any anybody try the original htc screen protector?
http://www.handtec.co.uk/product.php/6535/htc-one-x-screen-protector---2-piece--sp-p730-
Remember reading up on the original screen protector, it does not cover the whole screen and people were saying it was similar quality to the cheapo £3 ones from ebay.

Whats up with all those screen protector???

Is it just me or is it hard to find a screen protector that covers the entire front for the GS3??? I've been to Bell, Rogers and videotron and all 3 had a screen protector that were too small, it seemed to be cut out for the GSIII but left the bezel unprotected and made it more than annoying to swipe on your screen, I purchased 3 in-store and 1 on ebay and all of them, different brand but they were all the same, the covered just the screen and left the bezel nude. I finally had no choice, i was so tired of buying screen protector and havong to return them that i bout the 30$ Zagg Invisible Shield HD at bestbuy. This was the only one that was large enough to cover the front of the phone.
It's not just you; it's due to the fact that the screen for the SGIII is curved (similarly to that of the Galaxy Nexus). The only protector I'm aware of that compliments this feature is the upcoming Steinheil Curved Crystal: http://www.spigen.com/cell-phone/sa...creen-protector-steinheil-curved-crystal.html
well, it might be curved but that doesnt prevent people to make their screen protector 2mm wide on each side. I mean again, the screen might be curved but its barely visible, it not practically invisible. The Galaxy Nexus has a visible curve, but not the GS3
He provided a link above to what you want.
And the issue with the curve and a regular screen protector is that it will not properly stick to the curved edges - which was the issue with the nexus as well and thats why most of its screen protectors are cut short too.
The previous version of the ultra crystal did not stick to the edges of the screen due to the curve so they redesigned it to be the one he posted above.
It does not matter if the curve is visible or not, there is a curve.
lol this thread should be locked immediately... Try searching sometimes. It has been posted numerous times that the only covers that fir the whole screen at the moment are the wet install ones like Zagg.... Regular static cling one do not work because the are made from ridged material and are one FLAT piece which will not stick to the curved down sides..
SGP Flex HD covers the entire screen, but it's a wet install. It's close to impossible for a dry install cover to do full screen due to the curves.
Sent from my SGH-T999 using Tapatalk 2
Wet install protectors will cover the whole screen, dry install protectors won't. Simple as that
ATT's dry static cling screen protector made by "Moshi" does. I have had it from day one and I like it. I mean its not cheap but it gets the job done! I might install a ZAGG protector one day but not yet. I like the one I currently have.
yeah i hear you..i just installed a nano clear love it but not full on the corners..this will solve it..pre ordered
http://www.spigen.com/cell-phone/sa...creen-protector-steinheil-curved-crystal.html
Most screen protectors that are short of covering the whole screen these day are made that way on purpose, so that if you put on a case that grasps the bezel and or over a portion of the screen's edge, it won't lift up the protector..

So far no luck finding a good screen protector. Suggestions?

I'm not sure about the rest of you, but for now it seems like we can't get a good screen protector for the S3. All the flexible film based protectors dent too easy. This includes protectors like the SGP Curved Crystal. This review below clearly shows what I mean about easily denting. It also has issues with tight fitting cases.
Then if we go for a screen protector that doesn't dent so easy, they end up not covering enough of the screen. The SPG Ultra Clear nano and Ultra Crystal (2nd version) both don't dent like the Curved Crystal, but they don't cover enough of the screen. Especially the sides. So swiping near the edges you can easily feel the ridge. Ruins the smooth experience of the S3. Would be nice if Spiegen does a revision of the Curved Crystal like they did with the Ultra Crystal and made it so it didn't dent so easily. I definitely don't want to go with tempered glass as its just too thick. I am currently using a Realook Flex Film, and it covers the whole screen nicely, but has orange peal and dents easy just like the other flexible films out there. Realook now has a "3D forming crystal clear" protector. It covers the whole screen and uses their PET material for the main part of the screen, which should prevent the denting effect. I'll give this one a try, if it's not that great, I may just use no protector and go with a flip case. Anyone else have any suggestions.
Here's a pic of what I mean with not covering the whole screen for the Spigen SGP screen protectors.
This is what I just bought.. not sure when it's going to arrive but it should fit your criteria better?
http://www.ebay.com/itm/261072327014?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Ignore that link. I just recieved it and it doesn't cover the whole screen completely.
Search for the threads. There has been plenty of this
Sent from my SGH-T999
Xcor3 said:
Search for the threads. There has been plenty of this
Sent from my SGH-T999
Click to expand...
Click to collapse
To be honest, I've searched far and wide through the threads and Spigen seems to be the protector of choice. But once I look at reviews of those protectors elsewhere (like the YouTube video I posted) I end up seeing that they're not that great. I'm beginning to think that we have to go with either the flip cover protector or go with a hard film protector that doesn't cover the whole screen in order to get that glass like experience. All the soft film based protectors just dent to easy or have some orange peel effect. It just ruins the beautiful display of the S3.
Tempott said:
I'm not sure about the rest of you, but for now it seems like we can't get a good screen protector for the S3. All the flexible film based protectors dent too easy. This includes protectors like the SGP Curved Crystal. This review below clearly shows what I mean about easily denting. It also has issues with tight fitting cases.
Then if we go for a screen protector that doesn't dent so easy, they end up not covering enough of the screen. The SPG Ultra Clear nano and Ultra Crystal (2nd version) both don't dent like the Curved Crystal, but they don't cover enough of the screen. Especially the sides. So swiping near the edges you can easily feel the ridge. Ruins the smooth experience of the S3. Would be nice if Spiegen does a revision of the Curved Crystal like they did with the Ultra Crystal and made it so it didn't dent so easily. I definitely don't want to go with tempered glass as its just too thick. I am currently using a Realook Flex Film, and it covers the whole screen nicely, but has orange peal and dents easy just like the other flexible films out there. Realook now has a "3D forming crystal clear" protector. It covers the whole screen and uses their PET material for the main part of the screen, which should prevent the denting effect. I'll give this one a try, if it's not that great, I may just use no protector and go with a flip case. Anyone else have any suggestions.
Here's a pic of what I mean with not covering the whole screen for the Spigen SGP screen protectors.
Click to expand...
Click to collapse
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
I use the screen protector that came with my otterbox case and it has served me well so far. It doesn't cover the whole screen but then again, if it did it would come off when I used a case.
werked said:
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
Click to expand...
Click to collapse
I use the genuine Samsung Super Slim case which I feel gives the scratch protection I need for the back and sides of the phone, while adding practically no bulk to the phone. So an edge to edge screen protector would have no issues for me. If only Spigen would use the same material they use for the Ultra Nano or Ultra Crystal in their Curved Crystal protector it would be perfect. It's really too bad the Curved Crystal dents/creases so easily as shows in the above video.
I like what zagg did for the iPhone. They make a case friendly screen protector. I like having that option. If you plan to use a case then it's a perfect choice. If going to use no case or a snap on case then a regular screen protector suits just fine. It would be nice for companies to show android some love in this respect of options.
werked said:
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
Click to expand...
Click to collapse
you can pick up the SGP Flex HD. They cover the entire screen, and is hard to see that it is actually there. It feels smooth as well. Also it doesn't leave much finger prints on there
It seems you haven't looked hard enough, I have a thread on a skinplayer 3D mask film, 99.5% full coverage and has a self healing surface, flexible PET screen protector.
I use the zagg invisishield. Best one I've used yet. I also use it on my tablet. It's more expensive, but worth it. Of course I got mine from best buy the second day the phone was out. So there were only two to choose from ,and I didn't want to wait for one to be shipped to me.
It's designed to fill itself in for minor dents and scratches (I possibly butchered that explanation, but I think you understand). Also, it can be removed and reapplied.
The best part though, is that it's so clear it doesn't detract from the screen. In the past when I would use a screen protector it would always look like a filter was on my screen. Hated it. They've come a long ways in that aspect.
Sent from my SPH-L710 using xda app-developers app
I noticed nobody mentioned Wrapsol. Their ultra line is pretty tough. It comes with a back protector too.
adamdavidson said:
I noticed nobody mentioned Wrapsol. Their ultra line is pretty tough. It comes with a back protector too.
Click to expand...
Click to collapse
not 100% coverage, but excellent quality.
I hate when people ask about screen protectors because that means they obviously don't know about the best one out there. It is called clear-coat. Google it. Ive had it on all my phones. It is perfect. It doesn't come off unless you peel it off and leaves no residue behind. Most malls have a station that sells it and puts it on for you. If you watch videos of it you will see a guy scratching his iphone against rock and then peeling it off and no marks on the screen. Best way to go by far. It is also covered by a lifetime guarantee.
Skinomi - - - - very nice!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Seidio
Sent from my HTC EVO 4G ELTE using Tapatalk 2
Can't believe no one said real look screen protectors.
Sent from my JellyBean Galaxys3
Vikuiti!
I'm currently using Vikuiti screen protectors, and they're working out pretty well. It attracts fingerprints a bit, but nothing a quick wipe doesn't get rid of~
I'm not really so sure why everyone is so worried about the very edges of the screen that the Ultra Nano doesn't cover. It's a great protector that you can barely even tell is there, and it covers all of the important and useful parts of the screen just fine. I've been using it for 2 months and it still looks great, plus I've had no issues at all with scratches on the edges that aren't covered. Using it with a Diztronic TPU case. Put a case on your phone and the combination seems perfect to me.
I've been using vikuiti ( a less mentioned brand for screen protectors I think) and it's been working perfectly fine with the genuine galaxy s3 clear TPU case. No scratches on the phone or screen protector, I never really understood how people had to cycle through so many screen protectors. Best of luck to you finding your preferred sp!

100% full coverage screen protecto

is there such thing aside from the spigen curved one? i heard the spigen ones are garbage. i've used skinomi (they were all right, not as durable), they covered 95% of the screen. the zagg invisible shields were garbage, wasted 25$ and thought it covers the whole screen but it left a huge gap.
Try Tippin Screen protector.
tippin is where its at for full curved protectors.. just remember any case that wraps around the edge tightly is probably not compatible
Does this tippin cover as good if not better than SGP Curved Crystal? The reason I ask is the images on Amazon show that it does not cover the portion immediately above the ear speaker. I love the curved crystal except for the dents that won't disappear. Does the tippin have this problem? Thanks!
the tippin pretty much covers all. ear speaker, sensors+camera, and home button are cut out. if you press on it hard enough with your nail, itll leave a dent. will it go away eventually? dont know, probably not. i think the tippin scratches kind of easily. i noticed a small rainbow line. not sure if its a scratched screen protector or cracked glass. another thing about these screen protectors...you have a small margin for error for placement. i was ocd at first and wanted it on 100% perfect alignment. i tried the tape the side method. thought i had it on perfect, but nope. a small sliver didnt stick because it was on slightly to the left. took the whole thing off and could not put it on as good as before. i spent almost an hr, gave up and ended up with even worse alignment. so my advice is get it aligned the way you want it on the 1st try. since these were a ***** to apply, id like a screen protector thats between full and gapped coverage. but the clarity is good and i think it gets slightly less fingerprints than the naked screen.
aznblade said:
is there such thing aside from the spigen curved one? i heard the spigen ones are garbage. i've used skinomi (they were all right, not as durable), they covered 95% of the screen. the zagg invisible shields were garbage, wasted 25$ and thought it covers the whole screen but it left a huge gap.
Click to expand...
Click to collapse
The Spigen is good. I would say they are far superior to the Skinomi ones.
I went this route. This is now in my top spot for screen protectors.
http://chrismchoi.blogspot.com/2013/03/seidio-vitreo.html
This is what I use. It covers the entire screen and is smooth. It also seems to repel fingerprints and is somewhat scratch resistent. Most people looking at my phone can't even tell there is a screen protector on it.
http://www.amazon.com/REALOOK-Prote...=1362606630&sr=8-1&keywords=galaxy+s3+realook
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
j76ms said:
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
Click to expand...
Click to collapse
I don't notice any dents, but I use swype as my keyboard of choice. Do you push hard when texting? I let my 4 and 6 year old use my phone often, and I still don't notice much wear. There are a couple of tiny scrathes on my screen protector, and they are only noticeable in direct light at certain angles. I have had the protector on for about 3 months. My old protector (Zagg HD) showed fingernail dents and nicks about a week after I put it on.
j76ms said:
Thanks for the recommendations guys. I really like the Sigen Curved Crystal but am annoyed with the dents. When new, it is barely noticeable at all. I really wish this were available in more durable finish. The Seidio glass screen protector looks really nice but will not work with my case (Element Eclipse)
I am assuming the Realook is almost the exact same as the SGP curved crystal. The cutouts look the same and the hardness rating is the same. Do you notice dents that don't go away? If I were to use my fingernail to type, the screen protector would become pitted all over.
Click to expand...
Click to collapse
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Jottle said:
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Click to expand...
Click to collapse
Thanks Jottle. I was thinking it is probably the same material as the curved crystal. I have found 3 cases that the full coverage works with: UAG, Eclipse Element and SGP Modello. I love the look of the full coverage with these cases but with the dents, I have to replace the protector about once every 2 months.
Jottle said:
the realook 3d forming is essentially the same thin material as the SGP curved crystal. It does dent very easily, but I do find that the dents flatten out and get much better after a day or two. It's not self-healing by any means, but the depth of the dents actually decreases and becomes almost invisible to the eye if the original dent isn't very deep. But I would echo everyone's advice on this thread: these full screen protectors most certainly will not work with almost every tpu case. Any tight fitting case will push up the corners of the protector no matter what you do. I learned the hard way and had to throw out 3 of them. So the cheap ebay s-curve/s-line tpu cases, diztronic, and mercury cases will not work with these protectors unless you get very lucky with your placement. Though I have all these cases and none of them worked with the realook 3d forming screen protector
Click to expand...
Click to collapse
I am currently using the Seidio Surface case with my Realook screen protector. It works without any problems. I have also used the Rock Quicksand case and the Incipio Sylicriic without any issues.
Moozh1 said:
I am currently using the Seidio Surface case with my Realook screen protector. It works without any problems. I have also used the Rock Quicksand case and the Incipio Sylicriic without any issues.
Click to expand...
Click to collapse
Just wanted to add that I've now tried the Tippin full coverage screen protectors as well. They are incompatible with my case as well. There are some tpu cases that will work with full coverage protectors. But the extremely tight ones that barely cover the corners will not.

Screen Protector Discussion Thread

Hi everyone. I searched the forums for screen protectors, and what I found was a whole lot of threads on various screen protectors out there, but nothing centralizing these discussions. So I thought I'd create this thread.
1. What type of screen protector do you use?
2. How has it held up?
3. Have you gone without a screen protector?
4. If so, do you have any scratches?
5. What's the most you have paid for one?
6. What's the cheapest you have paid for one?
7. Any Rants? Any Raves?
8. Any you would recommend?
9. Any you would want to try?
10. Any tips to putting certain ones on?
Let's help each other out by sharing our knowledge on screen protectors for the HTC One.
Top screen protectors according to you guys.
1. Mime Feather Glass Screen Protector - $27.95 http://mimeusa.com/product/htc-one-feather-glass-tempered-glass-screen-protector/
2. Zagg Clear HD Screen - $19.99 http://www.zagg.com/invisibleshield/htc-one-cases-screen-protectors-covers-skins-shields
3. Verizon 3 Pack Anti-scratch Protectors - $12.99 http://www.verizonwireless.com/acce...-protectors-3-pack-w-screen-wipe-for-htc-one/
Installation videos
1. Android Authority demonstrating how to install wet and dry screen protectors such as the Zagg and ScreenWear http://youtu.be/sf0a-c7WH8U
2. Danny Winget demonstrating how to install a glass screen protector such as the Spigen Glass http://youtu.be/F4_wtcmWVv4
Reviews via Amazon
1. Zagg HD http://www.amazon.com/ZAGG-HDHTCM7S...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
2. Zagg Original http://www.amazon.com/ZAGG-HTCM7S-i...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
3. Mime Ghost Glass http://www.amazon.com/MIME-Tempered...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
4. AmFilm http://www.amazon.com/Protector-Inv...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
5. Tech Armor http://www.amazon.com/Tech-Armor-De...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
6. Skinomi http://www.amazon.com/Skinomi-TechS...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Drop Test
1. Zagg Shield drop test http://youtu.be/NxcUMZ4bTCM
2. Tempered Glass drop test http://youtu.be/33T1Qun7jsQ
Zagg HTC One High Def Screen Protector - Amazon
I think Zagg makes the best screen protectors, I have used them on both the HTC Droid Incredible and the HTC One. The Zagg screen protectors are not the cheapest option for screen protectors especially if you go for the ultra clear model but I think the cost is worth it, especially since zagg offers warranty replacements, you only pay for shipping. With the warranty replacements, registering your product on the Zagg website is quick and easy, there are no serial numbers you need to have or anything, you only need to tell them what device you got it for and which model screen protector you got.
Another benefit of the zagg shields is the lifetime of the screen protector, in my experience the screen protectors lasted almost 2 years for my Droid Incredible before I replaced it, the screen protector started to come off around the edges of my phone. While the screen protectors do age, I would much prefer the aged screen protector opposed to any damage to my screen. In my entire life of my Droid Incredible, bought in April 2010 and still used as an e-reader by my girlfriend today, there is not one scratch on the screen thanks to the Zagg shield.
While I have not personally tried the Verizon 3 pack of screen protectors, I have had friends use them and they were disappointed with the quality of them, the biggest issue was having the screen protector stay on.
Zagg screen protectors have done such a great job in my opinion I have not wanted or even thought of trying another brand.
As for tips to putting the Zagg brand on, make sure you wash your hands before you do anything, clean the screen so their is no oil, fingerprints, dust or anything else on the phone, make sure the spray gets on both the screen protector and the screen but do not soak either, just enough spray to cover the phone and protector. I found it best when applying the screen protector to start at the top of the screen in one of the corners and work your way to the opposite top corner then work your way down, make sure to use the applying tool they put in the packaging, be sure to use a good amount of force when use the tool but be careful not to apply too much pressure and crack the screen.
If you do not want to try putting the screen protector on yourself, you can go to the Cell Phone employees at Best Buy and have them put the screen protector on. You do not need to purchase the protector from Best Buy, but they charge you a fee to do it. The major benefit of this is that if they screw up and ruin your protector they will replace it.
I tried the Verizon 3-pack when initially purchasing the one. While they are decent, I knew I wanted something a little more rugged.
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent. I tested car keys, nails, and knives on the screen protector after applying it to the phone and absolutely no marks showed up. It fits perfectly to the parameters of the screen and is hardly noticable after application. I would highly recommend this product. I ordered it from the Mime USA website for about $28, they even threw in a code for free shipping!
Sent from my HTC6500LVW using xda app-developers app
I usually don't use screen protectors and whenever I put on a case, I take it off an hour later. I've had the phone for like 9 months now and the screen is fine. There are tiny little scratches but you can't notice them unless you try really hard to, they don't affect the clarity of the screen in any way. I just don't like using screen protectors because they attract finger prints and smudges so easily even when I try a more expensinve screen protector. Honestly the screen will be fine for a long time. Yes there will be extremely tiny scratches but you won't care because they're almost non-existant. But one thing to keep in mind though, is that sand is crazy harsh on the screens, so I'm extra careful when I go to the beach with my phone. That's when I suggest putting on a case and a screen protector. Because even if a tiny bit of sand getes in your pocket, it might cause a little damage. Right now my phone is brand new since I got it replaced because of a camera issue, and I just can't get myself to stick with putting on a case or screen protector, I had a screen protector on it but I took it off 2 weeks later because I miss the naked screen.
Spitfire91726 said:
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent.
Click to expand...
Click to collapse
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
i'm using an invisible shield screen protector. Went on pretty easy, there were no bubbles, and it's pretty thick. I've only had it on for a week, so I can't say much about durability, but it's pretty good as far as a screen protector goes. I'm still very partial to those matte finish screen protectors, so i'll probably be picking up one of those in the future.
BygSii said:
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
Click to expand...
Click to collapse
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
tyler.durden said:
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
Click to expand...
Click to collapse
+1 what he said, minus the experience with Spigen. The MIME Feather is the first glass screen protector I've tried, and I don't think I'll ever use anything else. It's superb and well worth the premium price. With that on the screen and a Ballistic Shell Gel case on the rest of the phone, I don't worry about it too much.
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
astmacca said:
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
Click to expand...
Click to collapse
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
xzyragon said:
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
Click to expand...
Click to collapse
Its definitely putting another layer of glass on the screen. You have to be careful and get it in the right position 1st time as they dont move around once stuck down. Removing them without breaking is, i suspect, very difficult. The "tape hinge" method of application works pretty well.
I have found the touch sensitivity on mine to be great. Certainly there is no difference to the "usability" of the phone, and the smoothness an feel is as good as the original screen.
I did read one review where the buttons on screen wouldn't work with a glass screen protector, but that has certainly NOT been my experience. From what i have read the thickness of these has come down from around 0.6mm in early incarnations to something like 0.15mm and being flexible in some brands.
I got a 0.4mm one. No scratches as yet. Its supposed to be very hard (9H??). I had no issues with fitting my case on after installing the screen protector.. Its a cheap silicone and hardback model that provides good corner protection. Hopefully the screen protector will help if it falls on its face sometime.
What about Just Like Glass?
Has anyone tried it?
Didnt know protectors like the Mime feather existed. Will have to try it out.
Xeternall said:
Didnt know protectors like the Mime feather existed. Will have to try it out.
Click to expand...
Click to collapse
Just bought my first one a month ago (MIME Ghost), best screen protector I have ever used. It's definitely scratch resistant and feels like the original screen. Not sure how it will hold up to drops, but that's not something I am willing to test.
Had a friend buy some Write Guard screen protectors for his HTC One. I installed one on his HTC One. Screen protector was all ready getting all kinds of scratches in it. No Bueno.
I used the XtremeGuard screen protector for a very long time on my HTC One, but recently I decided I wanted a matte finish screen protector, so I switched to Tech Armor Anti-Glare. Feels much nicer to me and gets a lot less fingerprints and smudges.
I was using the protector that came with the UG case. After reading this thread, I picked up a MIME. Very impressed. It goes on dry, was easy to remove and reposition and left absolutly no bubles (these drive me CRAZY). It has somewhat finger print resistant and I did not heave to deal with wetting the protector, then waiting 24 hours to see if all the bubles went away. Best screen protector I have purchased and believe me, I have tried at least 20 different types over the years.
I have had no issues with the touch sensitivity. You can't even notice it's on unless you look really closely at the top edge.
Using the screen protector that came with my otterbox comuter and it is quite terrible.
The screen protector has been on since April and it is already deteriorating. The spots where I'd swype, type show heavy signs of use. With a faint finger swipe over the screen you can actually feel the difference.
Other than that, the actual performance isn't the worst. Glare and all in the sun is bad, indoors though I don't have any issues.
Will look into MIME.
Cheers,

Categories

Resources