I am looking for a full flash for may xoom 2 Mz616. And now, wait is over!
Check this link and download your suitable xml, flash with RSD lite !
http://sbf.droid-developers.org/xoom2/list.php
Good news to all who are in stuck with original Honeycomb !
Thanks
What region are these for? And how are they flashed?
Just wondering because my MZ607 appears to be running software version 0.268.4.... and this SBF file appears to have 0.272.15 firmware.....
Is it possible to flash the mz616 file to a Vodafone branded mz616?
Casey Rain said:
What region are these for? And how are they flashed?
Just wondering because my MZ607 appears to be running software version 0.268.4.... and this SBF file appears to have 0.272.15 firmware.....
Click to expand...
Click to collapse
These are for Latin America region, you can see the 'latam' at the end of the file name.
Just put your Xoom 2 in bootloader, connect to RSD lite and flash !
hi
sorry for the noobe question but
What's inside? What this file does and how can i enter the bootloader?
thnks
cmeyal said:
hi
sorry for the noobe question but
What's inside? What this file does and how can i enter the bootloader?
thnks
Click to expand...
Click to collapse
This is the full image of system of xoom 2. You can flash it to put your xoom 2 back to factory condidtions.
To enter bootloader, turn off your xoom, push both power, volume up and down button, then release power button.
Use volume down to choose fastboot, use volume up to enter, then flash it.
thnks
I thought it ISC
Thanks anyway I'll keep it just in case.
[Bricked] invalid cg hab (cg: mbr, status: 0x0056)
my xoom 2 mz616 bricked after apply this rom....when using RSD Lite, it only start a few seconds and it stopped, and now my xoom 2 is bricked and on stucked at Fastboot screen, which said:
Device is LOCKED, Status Code:0
invalid cg hab (cg: mbr, status: 0x0056)
And i already tried to flash recovery.img and boot.img, but the problem still existed.
Pls help...
Below is the screenshot when i flash my xoom2 via RSD Lite 5.6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I flashed the MZ607 version on my tablet, worked just fine with RSD Lite v5.6.
It's the 3.2.2 - most updated than the verion that was installed before.
One funny thing that I noticed, it was that the Model number changed from "Xoom 2 ME" to "MZ607". But no luck installing the ICS leak yet.
lordrobin3k said:
my xoom 2 mz616 bricked after apply this rom....when using RSD Lite, it only start a few seconds and it stopped, and now my xoom 2 is bricked and on stucked at Fastboot screen, which said:
Device is LOCKED, Status Code:0
invalid cg hab (cg: mbr, status: 0x0056)
And i already tried to flash recovery.img and boot.img, but the problem still existed.
Pls help...
Below is the screenshot when i flash my xoom2 via RSD Lite 5.6
Click to expand...
Click to collapse
It is for xoom 2 Latin America, the boot loader version is locked and varied depend on the region of sale.
What is your boo loader? and the country you bought this xoom 2?
kennedytruong said:
It is for xoom 2 Latin America, the boot loader version is locked and varied depend on the region of sale.
What is your boo loader? and the country you bought this xoom 2?
Click to expand...
Click to collapse
Mine was Asia, i thought it was okay to upgrade rom from any region. do u know how i can fix this?
lordrobin3k said:
Mine was Asia, i thought it was okay to upgrade rom from any region. do u know how i can fix this?
Click to expand...
Click to collapse
I am sorry to hear that. As far as I know, you can bring to motorola for help. Or try using adb push to install fasboot, system ... manually. Hope you can fix it
http://www.android-hilfe.de/motorol...t-ap-fastboot-flash-mode-s-flash-failure.html try this (use Google translate)
kennedytruong said:
I am sorry to hear that. As far as I know, you can bring to motorola for help. Or try using adb push to install fasboot, system ... manually. Hope you can fix it
http://www.android-hilfe.de/motorol...t-ap-fastboot-flash-mode-s-flash-failure.html try this (use Google translate)
Click to expand...
Click to collapse
Yes, i tried that, but no luck... bcos my Xoom 2 MZ616 is an Asia tablet version
My Xoom Media Edition 2 wifi 32gb MZ607 bought here in Brazil this rom to be here to serve you posted to my model, does anyone know if going out to 4.0 update for my model here in Brazil?
Any european version?
Thanks
Brasil version 3.2 ?
j.o.j.o. said:
Brasil version 3.2 ?
Click to expand...
Click to collapse
I have MZ616 ...but how can I know witch version I have ?
...i think european
Thanks all
Denis
bootloader unlock tools
signals from Motorola
a little step forward for all locked devices, maybe is there hope for the XOOM 2 too?
So does this flash work on the xoom 2 eu/uk edition?
Related
Hi there. He appeared at the end of the official and so awaited KIt Kat for our LG G is available for download at: http://lg-phone-firmware.com/firmware-Lg+Optimus+G-Tutti-20.html.
Rom is brand VODAFONE ITALY / NETHERLANDS / SPAIN.-E97520A.
The software can be loaded UpTestEX_BY_BRIDE_2014. - an alternative to the methods:laugh:
This rom rooting this metod. Download this file:https://www.dropbox.com/s/w5ziw487ljejq6d/roottool.zip and follow instruktions.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
niuniek24w said:
Hi there. He appeared at the end of the official and so awaited KIt Kat for our LG G is available for download at: http://lg-phone-firmware.com/firmware-Lg+Optimus+G-Tutti-20.html.
Rom is brand VODAFONE ITALY / NETHERLANDS / SPAIN.-E97520A.
The software can be loaded VIA kdz_updater - an alternative to the methods:laugh:
Click to expand...
Click to collapse
is it locked to a specific network ?
Brontok said:
is it locked to a specific network ?
Click to expand...
Click to collapse
No. This rom works on any E975.
do we need to use offline method to install this?
edit: doesnt seem so, file is under 1GB
JaymzBond said:
do we need to use offline method to install this?
edit: doesnt seem so, file is under 1GB
Click to expand...
Click to collapse
Yes. My mistake, you have to upload the soft UpTestEX_BY_BRIDE_2014.
niuniek24w said:
Hi there. He appeared at the end of the official and so awaited KIt Kat for our LG G is available for download at: http://lg-phone-firmware.com/firmware-Lg+Optimus+G-Tutti-20.html.
Rom is brand VODAFONE ITALY / NETHERLANDS / SPAIN.-E97520A.
The software can be loaded UpTestEX_BY_BRIDE_2014. - an alternative to the methods:laugh:
Click to expand...
Click to collapse
Finally. From now several firmware should appear in the coming weeks (from other countries and carriers).
niuniek24w said:
Yes. My mistake, you have to upload the soft UpTestEX_BY_BRIDE_2014.
Click to expand...
Click to collapse
where is bride version?
what is the correct way to flash the kdz?
grifovunque said:
where is bride version?
what is the correct way to flash the kdz?
Click to expand...
Click to collapse
I flash with UpTestEX_BY_BRIDE_2014. I not have root:crying:
niuniek24w said:
I flash with UpTestEX_BY_BRIDE_2014. I not have root:crying:
Click to expand...
Click to collapse
please can you explain all your procedure?
i have try with bride version but i receive a kdz extraction error
thank you
please explain all your step
grifovunque said:
please can you explain all your procedure?
i have try with bride version but i receive a kdz extraction error
thank you
please explain all your step
Click to expand...
Click to collapse
Look this:http://forum.android.com.pl/f764/wgrywanie-oprogramowania-flash-firmware-dla-telefona-w-lg-alternatywna-i-prostsza-metoda-by-bride-352830/. Using google translator. I polish:laugh:
What is mean? VDS? VDI? VDN ??
Works with 977?
Sent from my LG-E977 using XDA Premium 4 mobile app
Good, successfully flashed. From stock 4.1.2 10j. I used this method, on windows7: http://forum.xda-developers.com/showthread.php?t=2625044P.S I hate that VDF logo screen on boot
You have G3 boot animation in theme section, try it.
Sent from my Sony Tablet S using Tapatalk
rimsilva said:
You have G3 boot animation in theme section, try it.
Sent from my Sony Tablet S using Tapatalk
Click to expand...
Click to collapse
No root no change.
niuniek24w,
What country kdz you flashed? I flashed VDN/VODAFONE NETHERLANDS, and don't have LTE option
zydrunas142 said:
niuniek24w,
What country kdz you flashed? I flashed VDN/VODAFONE NETHERLANDS, and don't have LTE option
Click to expand...
Click to collapse
I flash ITALY my operator is Orange Poland.
So whats new in kitkat?
this work on Brazilian E977?
No knock on/off and no knock code? Its pretty lame.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS FOR THE ONES WHO DON'T WANT TO COPY PASTE OR FASTBOOT FLASH EVERY IMAGE!!
YOU SHOULD HAVE AN UNLOCKED BOOTLOADER!!!!
Hi, I created this Program so that you can unbrick your moto g 2nd gen, or restore it to the stock firmware! Just run the script and it will do every thing for you!
DISCLAIMER
Code:
IM NOT RESPONSIBLE TO ANYTHING THAT HAPPENS TO YOUR PHONE.
I CANNOT ATTEND THE FUNERALS OF YOUR PHONES.
Anyways, xt1068 users can neglect the disclaimer as it has been tested on it.
And xt106x users can also try it, if you have all the firmware files with you. (read on, you'll get it)
INSTRUCTIONS
1.DOWNLOAD THE exe file(LP OR KK)
2.COPY IT INTO THE FOLDER WHERE YOU HAVE EXTRACTED YOUR FIRMWARE
3.RUN THE EXE FILE
4.OPEN README.TXT AND READ IT. THERE'S A LIST OF FILES YOU REQUIRE IN IT.
5.BOOT YOUR PHONE INTO BOOTLOADER MODE, PLUG IT IN AND CONTINUE.
6.SELECT IF YOU WANT TO LOCK BOOTLOADER OR NOT.
7.EXE WILL DO THE TALKING
8.SELECT IF YOU WANT TO FLASH A CUSTOM RECOVERY (CWM/PHILZ)
8.ENJOY!!
NOTE: IF YOU HAVE SELECTED TO LOCK BL AND YOU GET STUCK IN A BOOTLOOP, RUN RunThisIfYourPhoneDoesntBootAfterBLlock.bat as administrator
DOWNLOADS
FIRMARES (I DO NOT own them)
[just try to find your firmware and i recommend downloading it using Advanced Download Manager(android). Keep no. of Download parts to 9 and auto resume on under download section of slidebar.]
Tool under download tab.
CREDITS
To me for the LOGO
HIT THANKS IF I COULD HELP!! ITS FREE OF COST, YOU KNOW
XDA:DevDB Information
[TOOL][KK & LP]Titan Firmware And Recovery Flasher, Tool/Utility for the Moto G 2014
Contributors
Vidhanth
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-05-02
Created 2015-05-06
Last Updated 2015-05-06
CHANGES
Reserved
Thanks for your work. This tool work for downgrade lollipop to Kk?
gmpdri said:
Thanks for your work. This tool work for downgrade lollipop to Kk?
Click to expand...
Click to collapse
Will work from anywhere. You can flash this on any rom. The only thing is you should be able to boot into bootloader mode.:thumbup:
Vidhanth said:
Will work from anywhere. You can flash this on any rom. The only thing is you should be able to boot into bootloader mode.:thumbup:
Click to expand...
Click to collapse
Hi i have locked bootloader, can i use this for downgrade from Lollipop at kitkat or i will fist unlock bootloader? Thanks
realshaoran said:
Hi i have locked bootloader, can i use this for downgrade from Lollipop at kitkat or i will fist unlock bootloader? Thanks
Click to expand...
Click to collapse
I'm not sure is you should have an unlocked bootloader for this. Anyways, I guess it should work. You can try.
I don't have never unlock the bootloader, my moto g is All stock...
realshaoran said:
Hi i have locked bootloader, can i use this for downgrade from Lollipop at kitkat or i will fist unlock bootloader? Thanks
Click to expand...
Click to collapse
you will need a unlocked boot loader
reefuge said:
you will need a unlocked boot loader
Click to expand...
Click to collapse
Oh... Well, thanks you.
you sure you tried this ?
i just downloaded RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml this has 5 system.img_sparsechunk files and this script only flashes 4 ! would it not cause bootloop
Mirror to the firmware RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml : https://drive.google.com/file/d/0B4wmYm0bnkUAczZOckpBQkhuSms/view?usp=sharing
This is for XT1068 working ,flashed over soaktest. (used manual script)
I think it's obvious that the OP was refering to flashing stock Kit Kat firmware. After all the thread was started a couple of days ago, and the lollipop firmware was uploaded 6-7 hours ago.
notanoob said:
you sure you tried this ?
i just downloaded RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml this has 5 system.img_sparsechunk files and this script only flashes 4 ! would it not cause bootloop
Mirror to the firmware RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml : https://drive.google.com/file/d/0B4wmYm0bnkUAczZOckpBQkhuSms/view?usp=sharing
This is for XT1068 working ,flashed over soaktest. (used manual script)
Click to expand...
Click to collapse
Ok, I'll add a script for flashing lollipop firmware also. And will also update the OP.:thumbup:
And thanks for informing.
What is this 5.0.2 image?
It's user made or is the official image from motorola? @Vidhanth
Hey man, i'd loved this post.
Thank you for your efforts taking this possible, i just wanna ask you if you could upload this file "RETBR_XT1068_5.0.2_LXB22.46-28_cid12_CFC.xml.zip" into a best cloud storage service like dropbox or megaupload.. . it just because i tried download it 3 times =\ and it fail, stuck on 60% at 30kbps
Also could you provide the Md5 of this file please?
raz0r1991 said:
Hey man, i'd loved this post.
Thank you for your efforts taking this possible, i just wanna ask you if you could upload this file "RETBR_XT1068_5.0.2_LXB22.46-28_cid12_CFC.xml.zip" into a best cloud storage service like dropbox or megaupload.. . it just because i tried download it 3 times =\ and it fail, stuck on 60% at 30kbps
Also could you provide the Md5 of this file please?
Click to expand...
Click to collapse
Ok, so is the file on file factory? If yes, I have the secret to download that file from file factory.
Download Advanced Download Manager from the Play Store.
Under download settings, change all preferences like in the screenshot.
Then start the download and keep it downloading overnight.( only because that's the time we have the most patience)
Wake up, and you'll have the file downloaded!
Just for make sure, i need to unlock my bootloader and install TWRP recovery?
I've found TWRP 2.8.4.0 for titan, should it work?
raz0r1991 said:
Just for make sure, i need to unlock my bootloader and install TWRP recovery?
I've found TWRP 2.8.4.0 for titan, should it work?
Click to expand...
Click to collapse
Maybe unlocking bootloader is necessary but twrp is not necessary. And that's for sure:thumbup:
Updating op with serious info. Pls do read.
Update: Done. Updated op
I read the OP again, but could not see any change, what did you have fixed?
raz0r1991 said:
I read the OP again, but could not see any change, what did you have fixed?
Click to expand...
Click to collapse
Only mentioned that the bootloader has to be unlocked
Hi. I'm sharing some firmwares and I'll try to add new ones when / if I get a hold of them before they appear on lolinet .
A good place to look first is: https://mirrors.lolinet.com/firmware/moto/kane/
Please feel free to share your own links to firmwares if you find any.
KANE - XT1970 Firmwares
---------------------------------------------------------------------------------------------------------------------
Android 10:
KANE_QSAS30.62-24-11_subsidy-DEFAULT_regulatory-XT1970-3-KSA-TH_CFC.xml.zip
KANE_QSAS30.62-24-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_QSAS30.62-24-11_subsidy-DEFAULT_regulatory-XT1970-1-AUSTRALIA_CFC.xml.zip
KANE_AMX_QSAS30.62-28-7_subsidy-DEFAULT_regulatory-XT1970-2-CHINA_CFC.xml.zip
KANE_RETEU_QSAS30.62-33-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_QSAS30.62_33_2_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml.zip
KANE_RETEU_QSAS30.62-33-1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_QSA30.62-33_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-XT1970-1-CARICAM_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-XT1970-1-AUSTRALIA_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-XT1970-2-ARGENTINA_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-XT1970-3-KSA-TH_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-XT1970-3-INDIA_CFC.xml.zip
KANE_QSAS30.62-24-6_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_QSAS30.62-24-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_QSAS30.62-24-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
XT1970-3-DS-KANE_RETEU_QSA30.62-24_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
---------------------------------------------------------------------------------------------------------------------
PIE:
XT1970-3-DS_KANE_RETEU_PSA29.97-37_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_PSA29.137-16_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
XT1970-1_KANE_PSA29.137-16_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_PSA29.137-17_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_PSA29.160-30_subsidy-DEFAULT_regulatory-XT1970-3-INDIA_CFC.xml.zip
KANE_RETEU_PSAS29.137-17-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_PSA29.160-50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_PSAS29.160-50-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_PSA29.160-55-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_PSA29.160-55-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
---------------------------------------------------------------------------------------------------------------------
HOW DO I UPDATE WITH FASTBOOT WITHOUT LOOSING ROOT, HAVING TO FACTORY RESET?
I've made a .bat file for flashing and some other stuff. Basic stuff that I use the most.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unzip .bat to same dir as your fastboot.exe and double click it or drag it to your cmd window and press enter.
tys0n said:
Hi. I'm sharing some firmwares and I'll try to add new ones when / if I get a hold of them.
Please feel free to share your own links to firmwares if you find any.
KANE - XT1970 Firmwares
-------------------------------
XT1970-3-DS_KANE_RETEU_PSA29.97-37_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_PSA29.137-16_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
XT1970-1_KANE_PSA29.137-16_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
can you please upload indian firmware??
https://www.firmwaredown.com.br/index.php?a=downloads&b=file&id=8771
XT1970-3-DS_KANE_PSA29.137-16_subsidy-DEFAULT_regulatory-XT1970-3-INDIA_CFC.xml
Blur_Version.29.11.17.kane.retail.en.US (INDIA)
i.snehal.kiran said:
can you please upload indian firmware??
https://www.firmwaredown.com.br/index.php?a=downloads&b=file&id=8771
XT1970-3-DS_KANE_PSA29.137-16_subsidy-DEFAULT_regulatory-XT1970-3-INDIA_CFC.xml
Blur_Version.29.11.17.kane.retail.en.US (INDIA)
Click to expand...
Click to collapse
Found it on lolinet now.
https://mirrors.lolinet.com/firmware/moto/kane/official/RETIN/
XT1970-3
hello great guys, did you see firmware for PSA29.137-17?
ᕙ(⇀‸↼)ᕗ said:
hello great guys, did you see firmware for PSA29.137-17?
Click to expand...
Click to collapse
Hi. Yes I had it uploaded yesterday but forgot to post a link.
Here it is. KANE_PSA29.137-17_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
It's still June patch but I read that it should fix some gps issue.
Added: KANE_PSA29.160-30_subsidy-DEFAULT_regulatory-XT1970-3-INDIA_CFC.xml.zip
Here are all Motorola One Vision XT-1970-3 factory roms posted: https://boycracked.com/2019/07/27/official-motorola-one-vision-xt1970-3-kane-stock-rom/ per country.
August security patch, reteu added. KANE_RETEU_PSAS29.137-17-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
I bought an unlocked version of one vision in argentina. Anyone know if i can flash a firmware from another country and the correct steps to do it ?
AndresOrue said:
I bought an uncarrier version of one vision in argentina. Anyone know if i can flash a firmware from another country and the correct steps to do it ?
Click to expand...
Click to collapse
To answer my own question, I installed a firmware from India (RETIN_9.0_PSA29.160-30) and everything works perfect.
Added KANE_RETEU_PSA29.160-50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
tys0n said:
Added KANE_RETEU_PSA29.160-50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
https://drive.google.com/file/d/1fz1nwjozjhFv_lO7PQa7L2y-KfDO-pAs/view?usp=sharing
how to flash it
whynot4444 said:
how to flash it
Click to expand...
Click to collapse
Not sure if you refeer to firmware flashing but if that's what you wanna know, I've added a .bat-file to first post for some basic fastboot functions/flashing.
hello i have version XT1970-5 what firmware i can use ??, im flash kane retail it error at vbmetaa
whynot4444 said:
hello i have version XT1970-5 what firmware i can use ??, im flash kane retail it error at vbmetaa
Click to expand...
Click to collapse
China? Look here https://mirrors.lolinet.com/firmware/moto/kane_retcn/official/RETCN/
ilia3367 said:
China? Look here https://mirrors.lolinet.com/firmware/moto/kane_retcn/official/RETCN/
Click to expand...
Click to collapse
flash ok, but only 1 version, can be convert to another firmware ??
AndresOrue said:
To answer my own question, I installed a firmware from India (RETIN_9.0_PSA29.160-30) and everything works perfect.
Click to expand...
Click to collapse
Could you describe the step-by-step procedure of the work you did to install the new firmware on your device? ... did you need to re-lock your bootloader too? .. who are in the beginning of "playing" with our smartphones we will be grateful !!!!...thank you!!!!...
can you flash firmware for XT1970-5 RETCN to XT1970-RETEU ??
Added KANE_PSAS29.160-50-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Hi
Long story short, I purchased this phone privately from a random person on internet. Used it for about 2 weeks than 2 days ago phone got locked remotely by a rental company ( Using MDM/Knox). I called the rental company and found out the seller illegally sold a rental phone to me. Anyways i went on removing that lock by rooting the phone and followed instructions on this XDA forum to instal TWRP beta. First step of flashing VBMETA went well and than i flashed TWRP using odin and after a blue screen pops up showing Security Error: this phone has been flashed with unauthorised software ................ Odin not allowing me to flash official stock firmware on it . All error screenshots are attached. I can still get into download mode but not in recovery.
PLEASE help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your phone is stolen. Return it.
Sent from my SM-N950F using Tapatalk
vash_h said:
Your phone is stolen. Return it.
Sent from my SM-N950F using Tapatalk
Click to expand...
Click to collapse
Its not stolen. Not imei locked. The seller and company contract dismissed and than he sold the phone to me. Anyways thank you for your help
Install the latest software update if the software you are using is a lower version that the phone will not accept
mady123 said:
Hi
Long story short, I purchased this phone privately from a random person on internet. Used it for about 2 weeks than 2 days ago phone got locked remotely by a rental company ( Using MDM/Knox). I called the rental company and found out the seller illegally sold a rental phone to me. Anyways i went on removing that lock by rooting the phone and followed instructions on this XDA forum to instal TWRP beta. First step of flashing VBMETA went well and than i flashed TWRP using odin and after a blue screen pops up showing Security Error: this phone has been flashed with unauthorised software ................ Odin not allowing me to flash official stock firmware on it . All error screenshots are attached. I can still get into download mode but not in recovery.
PLEASE help.
Click to expand...
Click to collapse
it says Prenormal , install stock firmware for Australia and boot it , then follow this tuto https://www.youtube.com/watch?v=oM6juPO_vQg
now connect phone to pc with cable , n boot it to download mode by holding volume up n down , flash a blank vbmeta in odin then twrp , you are good to go and wont see that message again
edit : link added https://www.sammobile.com/samsung/firmware/SM-A705YN/
thanks guys. Problem solved.
mady123 said:
thanks guys. Problem solved.
Click to expand...
Click to collapse
Hi Mady,
I have your same problem, how did you solve this issue? can you perhaps share the step breakdown? I would greatly appreciate it, since I'm facing the same issue. I also bought a phone from the internet and the guy had taken it leased from somewhere else.
BK said:
it says Prenormal , install stock firmware for Australia and boot it , then follow this tuto https://www.youtube.com/watch?v=oM6juPO_vQg
now connect phone to pc with cable , n boot it to download mode by holding volume up n down , flash a blank vbmeta in odin then twrp , you are good to go and wont see that message again
edit : link added https://www.sammobile.com/samsung/firmware/SM-A705YN/
Click to expand...
Click to collapse
Hi,
I was researching through XDA, and this solution is the one that best seems to suit my problem. I can't install any firmware because I get the message : MDM Mode: Can't download (PIT)". in your recommendation you are saying to install Australia firmware. How can I get past MDM issue? with Odin? my bootloader is locked, and I cant access the main menu to enable developer mode and toggle the OEM unlock feature. is there a way this can be done through ADB or some alternative? thanks in advance for your help!
Dear freinds,
Recently I installed a FACTORY COMBINATION ROM to fix some problems in my Note 10+, the phone keep restarting before I see the Samsung Logo, if I enter the recovery, the phone will start to erase data automaticly but end with error, please check the photo:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I install a stock ROM the phone will work normaly, with factory COMBINATION binary I can't play with boot or recovery to install TWRP for example, the phone will restart to the download mode.
Any idea to help me please?
Best Regards
tarik2 said:
Dear freinds,
Recently I installed a FACTORY COMBINATION ROM to fix some problems in my Note 10+, the phone keep restarting before I see the Samsung Logo, if I enter the recovery, the phone will start to erase data automaticly but end with error, please check the photo:
If I install a stock ROM the phone will work normaly, with factory COMBINATION binary I can't play with boot or recovery to install TWRP for example, the phone will restart to the download mode.
Any idea to help me please?
Best Regards
Click to expand...
Click to collapse
im curious on how u think u installed combo? did u buy a factory token? use the bypass method? it doesnt look like a combo boot.. the splash screen is different on combo
elliwigy said:
im curious on how u think u installed combo? did u buy a factory token? use the bypass method? it doesnt look like a combo boot.. the splash screen is different on combo
Click to expand...
Click to collapse
Hello dear,
I bought a cheap solution based on killing the phone, then flash 4 factory files (bl1, bl2 ...etc) using Multidownloader Tool, then installed the complete factory ROM, but as you can see, till now I am not able to make it work.
About the Etoken, where I can buy it? I heared about it but could't find any thing on G.
Best Regards
I am not sure but I think I have the wrong Factory binary, I download it as for N975F with U2 security, I think its seams for N976 with U2, the code TB1 I think for N976, I will wait for other N975F U2 ROM.
tarik2 said:
I am not sure but I think I have the wrong Factory binary, I download it as for N975F with U2 security, I think its seams for N976 with U2, the code TB1 I think for N976, I will wait for other N975F U2 ROM.
Click to expand...
Click to collapse
yea.. i kno wat u used.. exynos usb recovery mode/method.. basically brick phone then use multidownloader to flash the repair files which then goes to dl mode where u can flash combo without token.
i think i got same files but i dont own a n975f.. i got them to research mainly.
and yes, if u r flashing wrong combo u will have problems lol
I've figured out how to do it.
Not free though
elliwigy said:
yea.. i kno wat u used.. exynos usb recovery mode/method.. basically brick phone then use multidownloader to flash the repair files which then goes to dl mode where u can flash combo without token.
i think i got same files but i dont own a n975f.. i got them to research mainly.
and yes, if u r flashing wrong combo u will have problems lol
Click to expand...
Click to collapse
I have installed combo after exynos recovery process
On N975f
Now where can buy etoken and how we can write in factory binary?
jun786 said:
I have installed combo after exynos recovery process
On N975f
Now where can buy etoken and how we can write in factory binary?
Click to expand...
Click to collapse
huh?