Develop Bugs

[Q] Possible bricked wonder?

Hello,
Recently I've flashed Arco's CM9 version. It all went well for a couple of weeks until today. When I booted my phone, suddenly all apps started crashing and then it rebooted. But, the problem is, it is now stuck on a flashing Samsung logo.
Before I've started this thread, I've read many many similar threads about this, and started a 'rescue operation' by my own by using the tutorials for flashing back a stock rom with ODIN and other possibilities.
Unfortunately, after I've tried twice using ODIN, my phone is still stuck in the Samsung logo loop. I also can't enter Recovery mode, but am able to enter Download mode, as you've probably noticed.
As this is my first Android phone, I've always carefully read the tutorials and disclaimers about possible failures. I'm aware that the maker of the rom is not responsible for this.
Since I tried to flash back to stock android 2.3.6 from CM9 kernel, I've read that this could give some problems. My question is:
- Would flashing CM9 back worth a shot, or totally useless?
I hope you can help me, and if there isn't a solution, I hope the shop can cover this as I've got warranty for one year and 9 months.

Care to share how you had flashed it at first...
And you can still boot to recovery rite ?
Sent from my GT-I8150 using xda premium

countdown93 said:
Hello,
Recently I've flashed Arco's CM9 version. It all went well for a couple of weeks until today. When I booted my phone, suddenly all apps started crashing and then it rebooted. But, the problem is, it is now stuck on a flashing Samsung logo.
Before I've started this thread, I've read many many similar threads about this, and started a 'rescue operation' by my own by using the tutorials for flashing back a stock rom with ODIN and other possibilities.
Unfortunately, after I've tried twice using ODIN, my phone is still stuck in the Samsung logo loop. I also can't enter Recovery mode, but am able to enter Download mode, as you've probably noticed.
As this is my first Android phone, I've always carefully read the tutorials and disclaimers about possible failures. I'm aware that the maker of the rom is not responsible for this.
Since I tried to flash back to stock android 2.3.6 from CM9 kernel, I've read that this could give some problems. My question is:
- Would flashing CM9 back worth a shot, or totally useless?
I hope you can help me, and if there isn't a solution, I hope the shop can cover this as I've got warranty for one year and 9 months.
Click to expand...
Click to collapse
it happened to my friends phone also, he can go to DL mode but not recovery mode, he flashed a stock rom via odin, but that didnt help, he was still stuck at samsung logo, and about flashing CM9 again, i guess u cant bcoz u cant go to recovery mode, if youve flashed a stock rom again and that didnt work for you too, i guess u need to send to samsung for repair, i remember my friend said it was a hardware problem, good luck

vanir29 said:
it happened to my friends phone also, he can go to DL mode but not recovery mode, he flashed a stock rom via odin, but that didnt help, he was still stuck at samsung logo, and about flashing CM9 again, i guess u cant bcoz u cant go to recovery mode, if youve flashed a stock rom again and that didnt work for you too, i guess u need to send to samsung for repair, i remember my friend said it was a hardware problem, good luck
Click to expand...
Click to collapse
I've read elsewhere that it was a hardware problem that appeared on 1:10 Wonders... I'm really disappointed since this was my first smartphone...
A small question though: Since I've (tried to) flash it back to stock rom, if I bring it back to the shop where I bought it, would they notice that there was another rom, which could give them a reason that I've void the warranty? I really don't want to pay another amount of cash for this (faulty) phone.
Also in reply to andynroid: I've flashed CM9 the first time with CWM, as adviced by Arco68.

Can you still go to recovery ?
Sent from my GT-I8150 using xda premium

countdown93 said:
I've read elsewhere that it was a hardware problem that appeared on 1:10 Wonders... I'm really disappointed since this was my first smartphone...
A small question though: Since I've (tried to) flash it back to stock rom, if I bring it back to the shop where I bought it, would they notice that there was another rom, which could give them a reason that I've void the warranty? I really don't want to pay another amount of cash for this (faulty) phone.
Also in reply to andynroid: I've flashed CM9 the first time with CWM, as adviced by Arco68.
Click to expand...
Click to collapse
well in my friend's case, samsung accept it and repair it, if the stock rom is flash successfully, i think they wont notice that you've flash i custom rom, good luck though

Am I being dense.... but what is 1:10 Wonder???
I saw this also mentioned by Rio S. (I think)....but did not think anything about it.... but, is it HW version??
Where can I see it on device.
Andy....
Guy says in OP...
can't get Recovery!!!
:banghead:
Sent from my GT-I8150 using Tapatalk

irishpancake said:
Am I being dense.... but what us 1:10 Wonder???
I saw this also mentioned by Rio S. (I think)....but did not think anything about it.... but, is it HW version??
Where can I see it on device.
Andy....
Guy says in OP...
can't get Recovery!!!
:banghead:
Sent from my GT-I8150 using Tapatalk
Click to expand...
Click to collapse
Hi...
I wrote in this thread
http://forum.xda-developers.com/showpost.php?p=25616419&postcount=17

The only solution seems to be to flash an Asian rom with multi package.
Sent from my GT-I8150 using Tapatalk

when you try to enter recovery mode, what is the image you first see? is there an image that look like an android? i cant remember the exactly image but if you see that image, i think you must reflash the CWM via odin. Because every time i reflash the stock rom, my recovery mode will gone. So try to reflash CWM via odin. Nothing wrong if you give it a try

irishpancake said:
Am I being dense.... but what is 1:10 Wonder???
Click to expand...
Click to collapse
i think it is one(1) out of ten(10) or 1 is to 10 sgw has a hardware problem, i guess thats what he meant, but isnt it kinda high

Experienced this as well. Just sent it for warranty and they swapped out the motherboard.

alidsd said:
The only solution seems to be to flash an Asian rom with multi package.
Sent from my GT-I8150 using Tapatalk
Click to expand...
Click to collapse
I've heard and read about that, I thought that Rio did that, but it wasn't succesful.
tomatoman23 said:
when you try to enter recovery mode, what is the image you first see? is there an image that look like an android? i cant remember the exactly image but if you see that image, i think you must reflash the CWM via odin. Because every time i reflash the stock rom, my recovery mode will gone. So try to reflash CWM via odin. Nothing wrong if you give it a try
Click to expand...
Click to collapse
I wished I could enter Recovery mode, but the problem is: I can't
. But I also didn't know that if I flash back to stock rom, the recovery would be gone too. Maybe I should reflash CWM via odin. Nice advice.
vanir29 said:
i think it is one(1) out of ten(10) or 1 is to 10 sgw has a hardware problem, i guess thats what he meant, but isnt it kinda high
Click to expand...
Click to collapse
Jup. One out of ten => 10%. Such an error rate may not appear for such a great brand. That is ridiculously high. Even 1% is too high in my opinion.
Deathmax said:
Experienced this as well. Just sent it for warranty and they swapped out the motherboard.
Click to expand...
Click to collapse
Yeah, but what I've heard from others in the Netherlands: they will say that your device has been damaged by water, which isn't protected by warranty. And the bill is equal to a new device, or even more expensive. I hope they're in 'good mood', otherwise I maybe have to search for another device.

Hey Bro... this happen to me a while ago.... but covered by warranty , just simply told them at the SSC that you do an update via Kies and sxxt happen , coz in my place there are cases that the phone hang after update via Kies not only this model , it happen to others model too.
I suggest that you flash it back to stock before you send it back to SSC , without CWM .
cheers

vanir29 said:
i think it is one(1) out of ten(10) or 1 is to 10 sgw has a hardware problem, i guess thats what he meant, but isnt it kinda high
Click to expand...
Click to collapse
My friend!!!
I think you have solved the mystery of 1:10......
but can Rio S. confirm??
I don't have bricked phone....
but I try to understand what is causing these, so to be of some help....
and 1:10 was a puzzle to me, so thank you...
Sent from my GT-I8150 using Tapatalk

Touch screen DEAD!

After trying to flash CM7 or 9 twice and failing.... my touch screen is now completely unresponsive.......
the first time I tried to flash CM7 and failed after flashing the Kernel..... then I used flashtool to install a stock ftf rom..... the screen started to work sometimes and just stoped working most of the time, so I tried to install CM7 again, but failed again also after flashing the Kernel.....
now I've tried R800at, R800i, and R800a, and the screen is totally unresponsive.
any Ideas? cuz I voided the warranty and you guys are my last hope!!!

FRKD said:
After trying to flash CM7 or 9 twice and failing.... my touch screen is now completely unresponsive.......
the first time I tried to flash CM7 and failed after flashing the Kernel..... then I used flashtool to install a stock ftf rom..... the screen started to work sometimes and just stoped working most of the time, so I tried to install CM7 again, but failed again also after flashing the Kernel.....
now I've tried R800at, R800i, and R800a, and the screen is totally unresponsive.
any Ideas? cuz I voided the warranty and you guys are my last hope!!!
Click to expand...
Click to collapse
Seems more likely to be a hardware problem. Get someone to repair it or repair it yourself.
Sent from my R800i using Tapatalk 2

AudioCreaper said:
Seems more likely to be a hardware problem. Get someone to repair it or repair it yourself.
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
ok... I'll try to change the screen.... thanks for the reply!

Same thing happened to me, took it back to bestbuy where I bought it, they simplygave me another one.
Sent from my R800x using xda premium

cj360 said:
Same thing happened to me, took it back to bestbuy where I bought it, they simplygave me another one.
Sent from my R800x using xda premium
Click to expand...
Click to collapse
oh they did :O
At&t told me that they can't do anything about it because I didn't have an warranty.... :/

If bootloader is locked. You always have 2 years of warranty with sony even if at&t refuses to repair it for free

sashake said:
If bootloader is locked. You always have 2 years of warranty with sony even if at&t refuses to repair it for free
Click to expand...
Click to collapse
I unlocked it..... that's why I don't have any warranty, and Sony are refusing to repair it :/

FRKD said:
After trying to flash CM7 or 9 twice and failing.... my touch screen is now completely unresponsive.......
the first time I tried to flash CM7 and failed after flashing the Kernel..... then I used flashtool to install a stock ftf rom..... the screen started to work sometimes and just stoped working most of the time, so I tried to install CM7 again, but failed again also after flashing the Kernel.....
now I've tried R800at, R800i, and R800a, and the screen is totally unresponsive.
any Ideas? cuz I voided the warranty and you guys are my last hope!!!
Click to expand...
Click to collapse
i have same problem with you
my both bottom corner touchscreen is unresponsive ..
now its very hard to type message or sms ..
anyone know how much to repair it without warraty ?
sorry for my bad english, thanks ..

digitizer not working properly
hi guys, i m newbie. pls help me. my r800i's main flexi cable was changed n everything is allright. one day later a quarter of touch screen cant swype, i changed flexi cable again, then half of screen cant swype.. i changed flexi cable then 3/4 screen cant swype. should i change the digitizer or is there any possibility problem or i buyed bad quality of flex. pls advise me.

[Q] No Boot! No LED Signal

So, i tried changing my roms from Paranoid Android to myonev 9.5
And i knew i had to flash boot.img but then i thought I'd do it after flashing the rom (sorry im a noob) which happened to be a graaaaaave mistake
Now my phone doesnt switch on to bootloader nor does it show the charging LED!'
I have a primoU device. Ive googled aroud and found out that it could be a hard brick and the only way is to give it to a service centre..
But the problem there is i live in INDIA and we dont have much service centres here, the closest one is around 400kms from my home :/
So i wanna really make sure that is it worth travelling all those miles..
PLUS, My warranty expired 2 months back :crying:
I wish somebody helps me here, i will do ANYTHINGGG

fznnsr said:
So, i tried changing my roms from Paranoid Android to myonev 9.5
And i knew i had to flash boot.img but then i thought I'd do it after flashing the rom (sorry im a noob) which happened to be a graaaaaave mistake
Now my phone doesnt switch on to bootloader nor does it show the charging LED!'
I have a primoU device. Ive googled aroud and found out that it could be a hard brick and the only way is to give it to a service centre..
But the problem there is i live in INDIA and we dont have much service centres here, the closest one is around 400kms from my home :/
So i wanna really make sure that is it worth travelling all those miles..
PLUS, My warranty expired 2 months back :crying:
I wish somebody helps me here, i will do ANYTHINGGG
Click to expand...
Click to collapse
Try reverting to stock with a stock backup you'll find that on xda ... of your phones not booting into bootloader manually try using the all in one kit..it should have such an option although i didn't try this... If u can boot in bootloader then there's 99.9% chance that ur phone will come back to live

hold your power button until the screen goes off
then hold down your volume down button until u boot into bootloader
if it doesnt boot, try and try again
if u can boot into bootloader, the rest is easy

Pranav Sharma (PS) said:
Try reverting to stock with a stock backup you'll find that on xda ... of your phones not booting into bootloader manually try using the all in one kit..it should have such an option although i didn't try this... If u can boot in bootloader then there's 99.9% chance that ur phone will come back to live
Click to expand...
Click to collapse
Thanks for ur quick reply
No matter how hard i try it doesnt boot in bootloader.
I tried the all in one kit, it doesnt detect my phone..
My pc detects it as QHSUSB_DLOAD

fznnsr said:
Thanks for ur quick reply
No matter how hard i try it doesnt boot in bootloader.
I tried the all in one kit, it doesnt detect my phone..
My pc detects it as QHSUSB_DLOAD
Click to expand...
Click to collapse
hmmm then im sorry to say but i think u have bricked your phone :crying:
no choice but to send to hTC

is it this easy to brick?
one small error?
arent there any drivers for this qhsusb thing? so that it can detect my phone and then i can adb it to bootloader?

Sorry mate then I'm afraid it's bricked but still you should keep trying put the phone in charging even if its not showing led signal.. Then try again to boot into bootloader...maybe it helps..coz it should not brick so easily:fingers-crossed:

Pranav Sharma (PS) said:
Sorry mate then I'm afraid it's bricked but still you should keep trying put the phone in charging even if its not showing led signal.. Then try again to boot into bootloader...maybe it helps..coz it should not brick so easily:fingers-crossed:
Click to expand...
Click to collapse
Isi it possible that i allow it to drain the battery and then it boots by itself?

The phone is off, it will take years to drain the battery

fznnsr said:
Isi it possible that i allow it to drain the battery and then it boots by itself?
Click to expand...
Click to collapse
Actually it is a very good idea i myself did it once .. but the difference was that screen was struck on white bright HTC screen taking a lot of battery so it got discharged in 10 hrs but just now it will take a lot of time .. so i don't think you have that much patience...

That happened to me too, but that's not a brick, that's just stuck. This dude's phone is badly bricked, only way would be to find a driver for QHSUBS_DLOAD but I don't think it will be easy to find as all htc devices have this problem, someone would have already found it by now

[Q] HELP! My Xperia Play Died!

Help! I think My Xperia Play died on me! Here's what happened. It may be a long post but PLEASE bear with me. I really need your help guys! My phone was just lying around on my desk and I decided to use it and was surprised because it won't unlock. So i thought that my home button was just malfunctioning and tried to slide it's game pad as it unlocks the phone by itself but still no respond. So I thought it turned off by itself and when I tried to turn it on, it won't turn on at all because there's no short vibration. Usually when we turn on our device, there's a short vibration right? So I removed the battery, placed it back again and turned on my phone and at last there's the short vibration. But after a while I noticed that the boot splash hadn't appeared yet. I waited for a couple of minutes but still nothing happens. When I turned it on again there's the short vibration and that's it. So I searched for solutions here on XDA and on the web and I tried almost all of it. I flashed it back to it's stock firmware using Flashtool and still the same. I tried using PC Companion and Sony Ericsson Update Service but still to no avail. I also relocked it's bootloader and reflashed everything again but nothing works. So I gave up because I thought it might be a hardware issue but I didn't drop my phone or anything so i don't know what went wrong.
Then the following day I decided to check on my phone again and to my surprise it's back to normal and I was really glad about it. So I didn't flash any custom ROM and Kernels because I'm afraid that it might screw everything again. I just rooted it and completely debloated it and installed init.d support for stock kernel. I flashed CrossBreeder and RTMixManager and modified it's systemui for quick panel and battery % mod. I also flashed custom boot animation and that's it. I was happy about my phone because it seems all is well.
But yesterday when I was about to use my phone, the same thing happened again! I tried to redo everything I did all over again but still nothing! I can still use it in flashmode and fastboot though. I also tried entering CWM Recovery. After I turned on my phone I spam pressed volume down and blue LED showed up with the vibration if you enter recovery mode but there's no display. Can anyone tell me what's the problem? It might be the flex cable or the digitizer but I don't know. Has anyone encountered the same situation as mine? Please help me! I don't know what's wrong with my phone!
P.S. I can't send it to Sony Centre as my warranty is already expired. My only option is buying a new Xperia Play. Because I browsed for replacement parts on the web and they don't ship it directly to my country and it costs too much if I have it ship to me indirectly.

You have a hardware failure, I see that right now is very common, you will need to replace the automatic light sensor, to get it working, or if you don't want replace it, you will have to switch onto JB, because it has ALS disabled by default.

Windshade said:
Help! I think My Xperia Play died on me! Here's what happened. It may be a long post but PLEASE bear with me. I really need your help guys! My phone was just lying around on my desk and I decided to use it and was surprised because it won't unlock. So i thought that my home button was just malfunctioning and tried to slide it's game pad as it unlocks the phone by itself but still no respond. So I thought it turned off by itself and when I tried to turn it on, it won't turn on at all because there's no short vibration. Usually when we turn on our device, there's a short vibration right? So I removed the battery, placed it back again and turned on my phone and at last there's the short vibration. But after a while I noticed that the boot splash hadn't appeared yet. I waited for a couple of minutes but still nothing happens. When I turned it on again there's the short vibration and that's it. So I searched for solutions here on XDA and on the web and I tried almost all of it. I flashed it back to it's stock firmware using Flashtool and still the same. I tried using PC Companion and Sony Ericsson Update Service but still to no avail. I also relocked it's bootloader and reflashed everything again but nothing works. So I gave up because I thought it might be a hardware issue but I didn't drop my phone or anything so i don't know what went wrong.
Then the following day I decided to check on my phone again and to my surprise it's back to normal and I was really glad about it. So I didn't flash any custom ROM and Kernels because I'm afraid that it might screw everything again. I just rooted it and completely debloated it and installed init.d support for stock kernel. I flashed CrossBreeder and RTMixManager and modified it's systemui for quick panel and battery % mod. I also flashed custom boot animation and that's it. I was happy about my phone because it seems all is well.
But yesterday when I was about to use my phone, the same thing happened again! I tried to redo everything I did all over again but still nothing! I can still use it in flashmode and fastboot though. I also tried entering CWM Recovery. After I turned on my phone I spam pressed volume down and blue LED showed up with the vibration if you enter recovery mode but there's no display. Can anyone tell me what's the problem? It might be the flex cable or the digitizer but I don't know. Has anyone encountered the same situation as mine? Please help me! I don't know what's wrong with my phone!
P.S. I can't send it to Sony Centre as my warranty is already expired. My only option is buying a new Xperia Play. Because I browsed for replacement parts on the web and they don't ship it directly to my country and it costs too much if I have it ship to me indirectly.
Click to expand...
Click to collapse
You could try using this app, https://play.google.com/store/apps/details?id=com.hatcyl.android.Disable_Auto_Brightness&hl=en , but i don't think thats the issue personally.

gangstermartorell said:
You have a hardware failure, I see that right now is very common, you will need to replace the automatic light sensor, to get it working, or if you don't want replace it, you will have to switch onto JB, because it has ALS disabled by default.
Click to expand...
Click to collapse
Okay I will try that later. Thanks!
fma965 said:
You could try using this app, https://play.google.com/store/apps/details?id=com.hatcyl.android.Disable_Auto_Brightness&hl=en , but i don't think thats the issue personally.
Click to expand...
Click to collapse
But I can't use it because there's no display on my phone.

Windshade said:
Okay I will try that later. Thanks!
But I can't use it because there's no display on my phone.
Click to expand...
Click to collapse
Flash a stock FTF again and see what happens.
try
fastboot erase system
and
fastboot erase userdata

fma965 said:
Flash a stock FTF again and see what happens.
try
fastboot erase system
and
fastboot erase userdata
Click to expand...
Click to collapse
I already tried it but it says permission denied because the device must be rooted. >.<
Sent from my GT-I9505 using xda app-developers app

Windshade said:
I already tried it but it says permission denied because the device must be rooted. >.<
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
actually no, it needs a unlocked bootloader to use those commands.

fma965 said:
actually no, it needs a unlocked bootloader to use those commands.
Click to expand...
Click to collapse
Yeah, tried it for the 2nd time.. I was able to erase system but I can't erase data because it says partition not found or permission denied.

Windshade said:
because it says partition not found or permission denied.
Click to expand...
Click to collapse
Which 1 is it?

fma965 said:
Which 1 is it?
Click to expand...
Click to collapse
That was the error message. It says "failed: partition not found or permission denied."

Windshade said:
That was the error message. It says "failed: partition not found or permission denied."
Click to expand...
Click to collapse
hmm i dunno then, wait for some one else to assist

Windshade said:
Help! I think My Xperia Play died on me! Here's what happened. It may be a long post but PLEASE bear with me. I really need your help guys! My phone was just lying around on my desk and I decided to use it and was surprised because it won't unlock. So i thought that my home button was just malfunctioning and tried to slide it's game pad as it unlocks the phone by itself but still no respond. So I thought it turned off by itself and when I tried to turn it on, it won't turn on at all because there's no short vibration. Usually when we turn on our device, there's a short vibration right? So I removed the battery, placed it back again and turned on my phone and at last there's the short vibration. But after a while I noticed that the boot splash hadn't appeared yet. I waited for a couple of minutes but still nothing happens. When I turned it on again there's the short vibration and that's it. So I searched for solutions here on XDA and on the web and I tried almost all of it. I flashed it back to it's stock firmware using Flashtool and still the same. I tried using PC Companion and Sony Ericsson Update Service but still to no avail. I also relocked it's bootloader and reflashed everything again but nothing works. So I gave up because I thought it might be a hardware issue but I didn't drop my phone or anything so i don't know what went wrong.
Then the following day I decided to check on my phone again and to my surprise it's back to normal and I was really glad about it. So I didn't flash any custom ROM and Kernels because I'm afraid that it might screw everything again. I just rooted it and completely debloated it and installed init.d support for stock kernel. I flashed CrossBreeder and RTMixManager and modified it's systemui for quick panel and battery % mod. I also flashed custom boot animation and that's it. I was happy about my phone because it seems all is well.
But yesterday when I was about to use my phone, the same thing happened again! I tried to redo everything I did all over again but still nothing! I can still use it in flashmode and fastboot though. I also tried entering CWM Recovery. After I turned on my phone I spam pressed volume down and blue LED showed up with the vibration if you enter recovery mode but there's no display. Can anyone tell me what's the problem? It might be the flex cable or the digitizer but I don't know. Has anyone encountered the same situation as mine? Please help me! I don't know what's wrong with my phone!
P.S. I can't send it to Sony Centre as my warranty is already expired. My only option is buying a new Xperia Play. Because I browsed for replacement parts on the web and they don't ship it directly to my country and it costs too much if I have it ship to me indirectly.
Click to expand...
Click to collapse
This happened to me and i had the phone checked and it was the flex cable that needed replacement

Did you find any solution or are blocked in recovery or flash mode?

Xperia Play booting up but stuck on SE logo

Hello!
I have a really weird problem with my xperia play. Tomorrow after the phone turned off because of empty battery, it stucks after the boot animation. However I'm able to lock/unlock it, it still shows the animation. I can even unlock the phone! But the display is always showing the SE logo
It seems like nobody else had this problem before. Before it turned off I played Asphalt 6 and i also set up the supercharged v6 script in the same session. I tested Chainfire3d that day but I also removed it correctly again and I removed some bloatware that day. It's an R800i, stock firmware and stock bootloader, but it's rooted. Does anybody know how I could fix it without reflashing the ROM? Of course I would do so if necessary.
EDIT: When I turn it off correctly it is almost instantly shut down.
EDIT2: Ok, forget it. Sorry that I spammed the board, I now simply unlocked and flashed it.
Thanks in advance
xxxxl25

xxxxl25 said:
Hello!
I have a really weird problem with my xperia play. Tomorrow after the phone turned off because of empty battery, it stucks after the boot animation. However I'm able to lock/unlock it, it still shows the animation. I can even unlock the phone! But the display is always showing the SE logo
It seems like nobody else had this problem before. Before it turned off I played Asphalt 6 and i also set up the supercharged v6 script in the same session. I tested Chainfire3d that day but I also removed it correctly again and I removed some bloatware that day. It's an R800i, stock firmware and stock bootloader, but it's rooted. Does anybody know how I could fix it without reflashing the ROM? Of course I would do so if necessary.
EDIT: When I turn it off correctly it is almost instantly shut down.
EDIT2: Ok, forget it. Sorry that I spammed the board, I now simply unlocked and flashed it.
Thanks in advance
xxxxl25
Click to expand...
Click to collapse
I have been reading around this forum for awhile now, and i have experienced my play being stuck on the boot logo, what always seems to work is when i use flashtool and flash the firmware to its original state. that might work, it doesnt hurt to try

xXAzzkika808Xx said:
I have been reading around this forum for awhile now, and i have experienced my play being stuck on the boot logo, what always seems to work is when i use flashtool and flash the firmware to its original state. that might work, it doesnt hurt to try
Click to expand...
Click to collapse
This works with locked bootloader? Oops. But TrueAnchestor ICS is a really great experience. **** warranty.

xxxxl25 said:
This works with locked bootloader? Oops. But TrueAnchestor ICS is a really great experience. **** warranty.
Click to expand...
Click to collapse
it's works on locked/unlocked bootloader

erwinstyd said:
it's works on locked/unlocked bootloader
Click to expand...
Click to collapse
Too late Now it's unlocked.