Official post is here http://forum.xda-developers.com/showthread.php?t=1778165
Please use this for future discussion.
-THIS THREAD NO LONGER UPDATED-
Reserved for OP
What doesn't work?
Sent from my SAMSUNG-SGH-I747 using xda premium
From what I know just camcorder . I'm not sure about the new features of touchwiz though they may be gone lol
Sent from my SAMSUNG-SGH-I747 using xda premium
tyshemi said:
From what I know just camcorder . I'm not sure about the new features of touchwiz though they may be gone lol
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I would also say you are probably right; will know when I get it all loaded up.. slow download at the moment.
Downloading now for Rogers S3, will post results.
---------- Post added at 08:53 AM ---------- Previous post was at 08:43 AM ----------
When flashing I get an error
ChaosMinionX said:
You read it right! I am loading it up right now on my device.
http://download.cyanogenmod.com/?device=&type=nightly
Above is the repository link; AT&T Users will want to use the "d2att" builds... current at the time of this post is cm-9-20120711-NIGHTLY-d2att.zip
Just download, and flash via CWM.
EDIT: Almost forgot; CM9 does not come packaged with the latest Google Apps so you will need to download them separately from here http://goo.im/gapps/gapps-ics-20120429-signed.zip
The repository for these can be found at http://goo.im/gapps you can try any of the ones with "ICS" in the file name.
Click to expand...
Click to collapse
Downloading and gonna flash in a Bit - Bell Canada
xhead said:
Downloading now for Rogers S3, will post results.
---------- Post added at 08:53 AM ---------- Previous post was at 08:43 AM ----------
When flashing I get an error
Click to expand...
Click to collapse
cirusnb said:
Downloading and gonna flash in a Bit - Bell Canada
Click to expand...
Click to collapse
Heres the fix... taken from user nory82688 in this post http://forum.xda-developers.com/showpost.php?p=28596664&postcount=11
"If anyone has issues flashing the rom , try this:
1. Extracted zip.
2. Went to ~\cm-9-20120711-NIGHTLY-d2att\META-INF\com\google\android
3. Opened updater-script with Notepad++*
4. Deleted the first line in the script & saved
5. zipped the files I previously extracted (this included the script you changed).
6. put zip in sdcard
7. reboot in recovery
8. factory wipe
9. flash"
*note: you could use regular Notepad as well for this or any text editor for that matter.
ChaosMinionX said:
Heres the fix... taken from user nory82688 in this post http://forum.xda-developers.com/showpost.php?p=28596664&postcount=11
"If anyone has issues flashing the rom , try this:
1. Extracted zip.
2. Went to ~\cm-9-20120711-NIGHTLY-d2att\META-INF\com\google\android
3. Opened updater-script with Notepad++*
4. Deleted the first line in the script & saved
5. zipped the files I previously extracted (this included the script you changed).
6. put zip in sdcard
7. reboot in recovery
8. factory wipe
9. flash"
*note: you could use regular Notepad as well for this or any text editor for that matter.
Click to expand...
Click to collapse
Will try now,
Really looking forward to flashing this ROM
Who is the main Dev/Team we can thank for this fantastic morning start?
Sent from my SAMSUNG-SGH-I747 using xda premium
naturefreak85 said:
Who is the main Dev/Team we can thank for this fantastic morning start?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I dont think that information is available yet or I would have had it in the OP... let me know if you find it and I will add it
I still get installation aborted
ChaosMinionX said:
You read it right! I am loading it up right now on my device.
http://download.cyanogenmod.com/?device=&type=nightly
Above is the repository link; AT&T Users will want to use the "d2att" builds... current at the time of this post is cm-9-20120711-NIGHTLY-d2att.zip
Just download, and flash via CWM.
EDIT: Almost forgot; CM9 does not come packaged with the latest Google Apps so you will need to download them separately from here http://goo.im/gapps/gapps-ics-20120429-signed.zip
The repository for these can be found at http://goo.im/gapps you can try any of the ones with "ICS" in the file name.
EDIT2: Problems installing? Getting Errors in CWM? Go here! http://forum.xda-developers.com/showpost.php?p=28597816&postcount=7
Click to expand...
Click to collapse
How did you find out it was for our device? I mean D2att doesn't make me think SGSIII
Sent from my SAMSUNG-SGH-I747 using xda premium
ChaosMinionX said:
Heres the fix... taken from user nory82688 in this post http://forum.xda-developers.com/showpost.php?p=28596664&postcount=11
"If anyone has issues flashing the rom , try this:
1. Extracted zip.
2. Went to ~\cm-9-20120711-NIGHTLY-d2att\META-INF\com\google\android
3. Opened updater-script with Notepad++*
4. Deleted the first line in the script & saved
5. zipped the files I previously extracted (this included the script you changed).
6. put zip in sdcard
7. reboot in recovery
8. factory wipe
9. flash"
*note: you could use regular Notepad as well for this or any text editor for that matter.
Click to expand...
Click to collapse
What is the exact text that needs to be removed? "assert(getprop("ro.product.device") == "d2att" || getprop" or "assert(getprop("ro.product.device") == "d2att" || getprop("ro.build.product") == "d2att");" I assume the latter.
naturefreak85 said:
How did you find out it was for our device? I mean D2att doesn't make me think SGSIII
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
It sprung up all over the forums this morning
@LarryLars I am going to remove the whole first line and see if it installs; I haven't gotten that far yet!
This is awesome. Too bad I won't be able to flash this until I later today.
Herp derp SGS3 Tapatalk 2
LarryLars said:
What is the exact text that needs to be removed? "assert(getprop("ro.product.device") == "d2att" || getprop" or "assert(getprop("ro.product.device") == "d2att" || getprop("ro.build.product") == "d2att");" I assume the latter.
Click to expand...
Click to collapse
That's what I deleted, and I still got installation aborted.
ChaosMinionX said:
It sprung up all over the forums this morning
Click to expand...
Click to collapse
Awesome. I am curious if they also remapped the buttons to the way ICS should be. No more menu button just a multitasking button. Let us know with screenshots.
Sent from my SAMSUNG-SGH-I747 using xda premium
Possible Source: http://www.androidpolice.com/2012/0...print-and-t-mobile-but-not-verizon-of-course/
Related
I am the owner of the Slim ICS for Nexus S ( http://forum.xda-developers.com/show....php?t=1390118). I have compiled a light ROM for Xoom WiFi ( WIngRay).
NOTE: I don't own a Xoom. So i need some brave souls to be testers. Please consider this a work in progress
Completely built from sources, pure AOSP slimmed down.
Highlights:
5 Languages ( en ( us, uk), fr, it, de, es)
Stock ICS Launcher.
Basic Google Stuff Included ( Gmail, Talk,market,Calendar and Contacts)
rooted
Stock Kernel ( for now)
Slim base should result in increased free Ram
Removed Apps: ( Available via addon package)
DeskClock
Email
Exchange
Galaxy4
OpenWnn
PicoTTS
PinyinIME
QuickSearchBox
VideoEditor
Videos
The above coupled with the following mods/optimization has resulted in this light weight base ROM.
Trimmed down
languages,
fonts,
media,
tts,
xbin,
srec.
Disclaimer: The usual stuff, Flash at your own risk. I am not responsible if you brick your device, burn your device etc. This ROM might be most suitable for experienced users but everybody is welcome to use it.
If you want to test this, get the base (http://db.tt/XMwQWYtt), removed apps (http://db.tt/x4BaTHLj) and face unlock (http://db.tt/NzoWVTsY). Please make sure you do a nandroid backup before flashing and report your findings after flashing Cheers.
Pls test all the features and report. Need to have CWM recovery or another one that can flash zip files. If everything works, this should be among the fastest ROM around. It is for the nexus S.
Installation:
A simple wipe cache, dalvik and install should do it. If not do a wipe data, system and then flash.
I'm not very familiar with Slim roms. May I ask what you've removed from an AOSP to make it "slim"? I bet others would like if you listed it in the OP. Thanks!
mutiny said:
I'm not very familiar with Slim roms. May I ask what you've removed from an AOSP to make it "slim"? I bet others would like if you listed it in the OP. Thanks!
Click to expand...
Click to collapse
I will wheni get back home. Trimmed down the languages, fonts, media, simpler rooting, tts, xbin, srec. Should be lighter and faster if everything works. Care to test? If there is enough interestI can look into additional mods.
Sent from my Crespo using xda premium
Nobody curious to test it?
Sent from my Crespo using xda premium
krarvind said:
Nobody curious to test it?
Sent from my Crespo using xda premium
Click to expand...
Click to collapse
I will. Is there a list of what is removed?
ajk1311 said:
I will. Is there a list of what is removed?
Click to expand...
Click to collapse
First Post updated with removed apps list and other optimization which has helped slim the base Rom down significantly.
Edit: I just realized that i have accidently added phone.apk into the rom, shouldn't hurt anything but don't expect magic
krarvind said:
I will wheni get back home. Trimmed down the languages, fonts, media, simpler rooting, tts, xbin, srec. Should be lighter and faster if everything works. Care to test? If there is enough interestI can look into additional mods.
Sent from my Crespo using xda premium
Click to expand...
Click to collapse
Thank you! I'll test it for you when I get the chance and report back.
I noticed there is no Gapps package. Are they already included?
I only ask because every other ICS Xoom rom has a Gapps package
ajk1311 said:
I noticed there is no Gapps package. Are they already included?
I only ask because every other ICS Xoom rom has a Gapps package
Click to expand...
Click to collapse
Yes and no. I have included, Gmail, talk, contact sync and calendar sync in the base ROM. No maps is provided, i can add that and google earth to the removed apps or provide them as a separate zip. it's also available in the market.
krarvind said:
Yes and no. I have included, Gmail, talk, contact sync and calendar sync in the base ROM. No maps is provided, i can add that and google earth to the removed apps or provide them as a separate zip. it's also available in the market.
Click to expand...
Click to collapse
Yeah anything extra I can grab from the market so that's not a big deal for me. I was just making sure I had all the right files that's all. I will be traveling a bit today so I might not provide feedback till tomorrow but I am flashing it right now!
ajk1311 said:
Yeah anything extra I can grab from the market so that's not a big deal for me. I was just making sure I had all the right files that's all. I will be traveling a bit today so I might not provide feedback till tomorrow but I am flashing it right now!
Click to expand...
Click to collapse
Let me know if it boots and other basic stuff. Cheers
Got:
assert failed: getprop("ro.product.device") == "wingray" || getprop("ro.build.product") == "wingray"
E:Error in /sdcard/Slim_ICS_Xoom_Alpha_1.zip
(Status 7)
Installation aborted.
I checked the build.prop on my current rom and the ro.product.device is indeed wingray
ajk1311 said:
Got:
assert failed: getprop("ro.product.device") == "wingray" || getprop("ro.build.product") == "wingray"
E:Error in /sdcard/Slim_ICS_Xoom_Alpha_1.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
yours is a wifi version of the Xoom right? if yes, you can remove that assert, code name for the wifi version is wingray, but may be not all devices are called that way. do you have a model numbe, if so i can add it to the updater script. In the mean time, whoever is flashing, as long as its the Wifi version, it should work fine, if you remove the asserts.
krarvind said:
yours is a wifi version of the Xoom right? if yes, you can remove that assert, code name for the wifi version is wingray, but may be not all devices are called that way. do you have a model numbe, if so i can add it to the updater script. In the mean time, whoever is flashing, as long as its the Wifi version, it should work fine, if you remove the asserts.
Click to expand...
Click to collapse
Yes it is a wifi version and my build.prop does say wingray.. I'll try removing the assert
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
Okay, dumb problem on my end. Never made a flashable zip before. Once I edit the updater script how do I re-zip the rom?
ajk1311 said:
Yes it is a wifi version and my build.prop does say wingray.. I'll try removing the assert
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
Okay, dumb problem on my end. Never made a flashable zip before. Once I edit the updater script how do I re-zip the rom?
Click to expand...
Click to collapse
windows machine? do you have winrar or winzip, if so select all the contents of the extracted folder, not the folder, so you should see META-INF, system and boot.img, select them and compress.
krarvind said:
windows machine? do you have winrar or winzip, if so select all the contents of the extracted folder, not the folder, so you should see META-INF, system and boot.img, select them and compress.
Click to expand...
Click to collapse
Macbook Pro actually, but I am using a PC Compatible zip application. I was zipping the folder though, not the contents so that was probably my issue. I will try again in a few minutes.
ajk1311 said:
Macbook Pro actually, but I am using a PC Compatible zip application. I was zipping the folder though, not the contents so that was probably my issue. I will try again in a few minutes.
Click to expand...
Click to collapse
don't forget to reboot recovery, or else it won't work
krarvind said:
don't forget to reboot recovery, or else it won't work
Click to expand...
Click to collapse
Alright it booted!
A few things I noticed right away:
nice and snappy, very light and fast rom!
However, camera does not work. Whether it's through the camera app or facelock, it says it cannot connect to the camer.
Also, a little aesthetic detail, the signals bars are still present in the botton status bar. Just kind of annoying for a wifi only tablet lol.
Can't wait to see future updates!
EDIT: to be clear, I did flash the faceunlock zip
ajk1311 said:
Alright it booted!
A few things I noticed right away:
nice and snappy, very light and fast rom!
However, camera does not work. Whether it's through the camera app or facelock, it says it cannot connect to the camer.
Also, a little aesthetic detail, the signals bars are still present in the botton status bar. Just kind of annoying for a wifi only tablet lol.
Can't wait to see future updates!
EDIT: to be clear, I did flash the faceunlock zip
Click to expand...
Click to collapse
Thanks for the feedback. Whats with the camera and the devices i don't own , camera doesn't work on Galaxy Nexus and this. I will do some digging. ANy chancec you can produce logcat, ( adb logcat). The signal is prob due to certain copy paste i did from my nexus s zip file, i am sure that can be fixed. What about Wifi? BT? Gmail syncs etc?
krarvind said:
Thanks for the feedback. Whats with the camera and the devices i don't own , camera doesn't work on Galaxy Nexus and this. I will do some digging. ANy chancec you can produce logcat, ( adb logcat). The signal is prob due to certain copy paste i did from my nexus s zip file, i am sure that can be fixed. What about Wifi? BT? Gmail syncs etc?
Click to expand...
Click to collapse
Wifi and gmail worked perfectly. Don't have anything to test bluetooth with. I can give you a logcat tomorrow because I am away from home now.
Sent from my HTC Vision using xda premium
Well guys..:fingers-crossed::fingers-crossed:
We are in a busy world with so many ROMS like PAC MAN, Paranoid, Cyanogen Mod, Avatar, ThinkingBrigde..bla bla blaaaaa...:victory::victory:
XDA has lot of devs who mod the stock roms too, but till now we don't have any custom roms based on STOCK ROM..
I think they may need rom dump...Obviously...Its must...So this is for you guys and thats why I've created this thread in development section..:good::good:
So I can now move ahead..Here it goes--->>>>
Flashable zip (You can use this to get back to STOCK ROM without KDZ)
STOCK CLEAN ROM_4.1.2 v10E (BLOATWARES there)
Rooted and busybox Installed
Completely DE-ODEXED (Themers can now make themes)
RECOMMENDED TO TAKE BACKUP BEFORE FLASHING THIS...!!
Click to expand...
Click to collapse
If any one wants to mirror the links, juz update it to me so that I'll include the link here...:good:...Thanks
Download two zips and flash...:good::good:
CLICK TO DOWNLOAD
KEYBOARD FIX
No need to wipe data and cache if you are flashing this on ur stock odexed rom....
ENJOY......:laugh::laugh:.....Grab me a beer--->>Juz click THANKS...
Modders are Invited...:good::good:
Thank you bro..
Is this work with Korean LG?
Sent from my LG-E975 using xda premium
joseph168 said:
Is this work with Korean LG?
Sent from my LG-E975 using xda premium
Click to expand...
Click to collapse
Nt sure.... Bettr take nandroid backup nd try..!!
Sent from my LG-E975 using xda premium
hasan4791 said:
Nt sure.... Bettr take nandroid backup nd try..!!
Sent from my LG-E975 using xda premium
Click to expand...
Click to collapse
I think if you already include those Korean modem, it should work. I would try soon after finished download
Sent from my LG-E975 using xda premium
joseph168 said:
I think if you already include those Korean modem, it should work. I would try soon after finished download
Sent from my LG-E975 using xda premium
Click to expand...
Click to collapse
No korean modem is nt included in this, since the zip is made frm the system dump of E975...I think now yu gt the way to wrk it out..... And if yu follow ny procedure to make it wrk in ur mobile juz list out the steps here... It ll be usefull for others too...
Sent from my LG-E975 using xda premium
hasan4791 said:
No korean modem is nt included in this, since the zip is made frm the system dump of E975...I think now yu gt the way to wrk it out..... And if yu follow ny procedure to make it wrk in ur mobile juz list out the steps here... It ll be usefull for others too...
Sent from my LG-E975 using xda premium
Click to expand...
Click to collapse
I am about to download the files. I will merge them together and reupload them on my private ftp tp make it easier for people to download. Can you tell me which modem/baseband? did you take the intl german kdz for this or is there even a difference? I am thinking about to extract sum modem files and therefore make this universal....what do you think?
haasgo said:
I am about to download the files. I will merge them together and reupload them on my private ftp tp make it easier for people to download. Can you tell me which modem/baseband? did you take the intl german kdz for this or is there even a difference? I am thinking about to extract sum modem files and therefore make this universal....what do you think?
Click to expand...
Click to collapse
yeah it would very great idea if you could include all variant LG
joseph168 said:
yeah it would very great idea if you could include all variant LG
Click to expand...
Click to collapse
what I have done:
1. wiped cache
2. wiped system
3. wiped data
4. wiped dalvic cache
5. chose geehrc_unsigned_081613_003733.zip to install
-> installation aborted, status 0. I am sorry mate but file is corrupted. and me has no backup.... will setup everything again and wait...
---------- Post added at 02:51 PM ---------- Previous post was at 02:46 PM ----------
signature verification failed....but what is the matter ? is it cause the file is unsigned? nothing helps.
haasgo said:
what I have done:
1. wiped cache
2. wiped system
3. wiped data
4. wiped dalvic cache
5. chose geehrc_unsigned_081613_003733.zip to install
-> installation aborted, status 0. I am sorry mate but file is corrupted. and me has no backup.... will setup everything again and wait...
---------- Post added at 02:51 PM ---------- Previous post was at 02:46 PM ----------
signature verification failed....but what is the matter ? is it cause the file is unsigned? nothing helps.
Click to expand...
Click to collapse
Bro i asked yu to take backup b4 doing nything...!!... Let me chk tonyt nd reupload it...!!
Sent from my LG-E975 using xda premium
haasgo said:
what I have done:
1. wiped cache
2. wiped system
3. wiped data
4. wiped dalvic cache
5. chose geehrc_unsigned_081613_003733.zip to install
-> installation aborted, status 0. I am sorry mate but file is corrupted. and me has no backup.... will setup everything again and wait...
---------- Post added at 02:51 PM ---------- Previous post was at 02:46 PM ----------
signature verification failed....but what is the matter ? is it cause the file is unsigned? nothing helps.
Click to expand...
Click to collapse
Juz toggle the signature verification and try....
Sent from my LG-E975 using xda premium
hasan4791 said:
Juz toggle the signature verification and try....
Sent from my LG-E975 using xda premium
Click to expand...
Click to collapse
I have, but still the same. siganture verfication failes, status 0.
haasgo said:
I have, but still the same. siganture verfication failes, status 0.
Click to expand...
Click to collapse
Sry fr the trouble... .... Tonyt surely upload a new one...!!... Thanks buddy... But always take backup b4 doin nythin...
Sent from my LG-E975 using xda premium
hasan4791 said:
Sry fr the trouble... .... Tonyt surely upload a new one...!!... Thanks buddy... But always take backup b4 doin nythin...
Sent from my LG-E975 using xda premium
Click to expand...
Click to collapse
No worries mate! Trial and error I always have a nandroid backup around but wasnt really up to date (from mid may) I will setup a ftp acc for ya to upload the file. Will make things easier :thumbup:
[email protected] Optimus G
haasgo said:
No worries mate! Trial and error I always have a nandroid backup around but wasnt really up to date (from mid may) I will setup a ftp acc for ya to upload the file. Will make things easier :thumbup:
[email protected] Optimus G
Click to expand...
Click to collapse
I think problem is with update-binary ....
hasan4791 said:
I think problem is with update-binary ....
Click to expand...
Click to collapse
If this is a copy paste thing only send me the binar and I will update the zip and upload on my own. Will test before doing so.
[email protected] Optimus G
Try this
haasgo said:
If this is a copy paste thing only send me the binar and I will update the zip and upload on my own. Will test before doing so.
[email protected] Optimus G
Click to expand...
Click to collapse
Sry guys....XDA kitchen doesn't have edify file for our device which caused so many errors.....Hey bro replace the metainf folder with the following ones(rename the file which replacing) and let me knw which works....it works 100%...hope so....:fingers-crossed::fingers-crossed:
Make 3 flashable zips seperately using these files and place it in sdcard...so that if anyone doesnt wrk, we can easily flash other one.....!!
EDIT: GOT WORKING....ZIP WIILL BE AVAILABLE TONITE....Thanks for ur help man...:good:
where is the download link just now?
joseph168 said:
where is the download link just now?
Click to expand...
Click to collapse
Status 0 error...Zip available by today...:good:
Bugs found and fix applied...Problem was with update script...Be carefull when you use kitchen to cook ROM for this phone...!!...:good::good:
Uploading zip in google drive as a single file....
:fingers-crossed::fingers-crossed:
Updateermission screwing the wifi and BT...!!
Update: Everything fine...Planning to release debloated version and system dump separately...:good::good::good:
UPDATE 12/2/2013: The tutorial will remain for users who would like to change their own settings within the ROM or just like doing things themselves. However, I have included a Google Drive link to a modded ROM to skip most of the process, meaning you can just move this file to the root of your storage and flash and go from there. The link will be under Resources and I will try to update every Friday, no guarantees as I go to school and finals are coming up.
Hey guys, today I have a tutorial for anyone attempting to install MIUI v5 for the LG Optimus G LS970. I myself was totally hooked on this ROM seeing as it is totally different from Android yet still holds true to a lot of what Android is. Some setbacks are that this runs on Android JellyBean 4.2, a little dated for certain people and also not all options work, and you can scour around to figure out what those are as I personally have not testing everything. I do know that NFC is having problems and some people are having issues with phone services but there are workarounds that I will list in the resources below. Now for the tutorial.
*Note: This is what I did to get this to work based on the information found in the LS970 thread for MIUI v5 (linked below) and my constant attempts to see whats wrong, Im in no way a professional nor a developer just a user who wants to get things done. This may not work for everyone. If your phone messes up, I hold no responsibility as you did this out of your own choice and you have been warned. Credits go to siulmagic for the LS970 port and the work he was able to do with it, hopefully he can continue development. Credits also go to 2nd Sky for providing the basis for the tutorial. Links to their profile will be listed in the resources as well.
--Tutorial--
You will be flashing the F180/E975 ROM version of MIUI v5, and it is said you must install the recovery for the E975 in order to flash a ROM from this device, however this was not needed.
The following files will need to be downloaded:
7-Zip: http://www.7-zip.org/
LS970 MIUI ROM: http://www.androidfilehost.com/?fid=23060877489996359
F180/E975 MIUI ROM: http://rom.miui.com/download/view/359381#top (click the red button to download)
Custom Recovery: http://www.mediafire.com/download/ta3ecb4r4cq0b99/TWRP-2.6.3.0-LS970(sprint).zip (This is the latest TWRP version, but I used version 2.4.4.0, yet I do not think this matters)
Step 1: Install 7-Zip onto your PC. Once you have all files downloaded move all of them to the ROOT of your phone EXCEPT the F180/E975 ROM. This will not work if the files are not on the root as I have come to notice.
Step 2: Open up the F180/E975 ROM with 7-zip (it is a zip file). Navigate to the updater-script file and open it with Notepad (the location of the updater-script is META-INF-->com-->google-->android). To open with Notepad just double click the updater-script file and you will be ask to choose a program, choose Notepad of course. DO THIS ALL FROM THE ZIP FILE, DO NOT EXTRACT ANYTHING.
Step 3: With updater-script open, you will delete the following line:
assert(getprop("ro.product.device") == "e975" ||
getprop("ro.build.product") == "e975");
That includes the semi-colon. Save the file within Notepad and close. Once you close 7-Zip will prompt you that the file was modified and if you would like to save, hit YES. This will now modify updater-script within the zip file. Let that finish and now the zip can be moved to the root of your phone along with the other files. OPEN UP UPDATER-SCRIPT WITHIN THE ZIP TO MAKE SURE THE CHANGE WAS MADE, I GOT AN ERROR WHEN I TRIED FLASHING AND IT WAS BECAUSE 7-ZIP DID NOT SAVE THE MODIFED UPDATER-SCRIPT. CLOSE THE ZIP FILE AND RE-OPEN IT AND CHECK ONE MORE TIME BEFORE TRANSFERRING TO THE ROOT OF YOUR OPTIMUS.
Step 4: Now flash install TWRP. If you do not have a custom recovery to begin with you can download Goo Manager from the Play Store and install through there and update if required. I did a dirty flash of MIUI, meaning I flashed without factory reset or anything. There is no need for GAPPS as they are already built into the ROM. Go into your custom recovery and you will want to flash the LS970 ROM. If all goes well it will install without problems and you can reboot into system and setup MIUI. If you get errors during install or afterwards, try wiping the system within TWRP and try again. All you want to do is just get to the homescreen for MIUI.
Step 5: Once you have been sent into the MIUI homescreen for the first time, you will boot into recovery again and proceed to flash the F180/E975 ROM. There should be no issues and the flash should go smoothly. There is no factory reset or clearing of cache because MIUI takes this as an update to the previous ROM, so when you boot back into MIUI you will go directly to the homescreen. Now, reboot back into recovery for the final time and wipe data then factory reset and reboot into system for a nice clean MIUI v5 setup. Enjoy your new ROM!
--FAQs--
Ask them in the thread, questions will be added to this post as well as their answers and whoever answered it.
1. Can this ROM be updated?
Yes the ROM can be updated, however OTA does not work currently until someone finds a fix. A workaround is downloading the updated ROM manually from the website (or on the phone) and following the instructions listed above and then flashing the modified updated ROM. Unfortunately this takes more time but if you want an updated MIUI v5 this is the only way to get it as of now and as of my knowledge.
--Resources--
Modded ROM (Current Version: 3.11.29 v5): https://drive.google.com/folderview?id=0B9akUN35QuHKZHJGOTlJeDVaOUU&usp=sharing
Siulmagic's Profile: http://forum.xda-developers.com/member.php?u=517347
2nd Sky's Profile: http://forum.xda-developers.com/member.php?u=5310926
LS970 MIUI ROM Thread: http://forum.xda-developers.com/showthread.php?t=2330690
F180/E975 MIUI ROM Thread: http://forum.xda-developers.com/showthread.php?t=2489976
MIUI Official English Site: http://en.miui.com/
MIUI Official English Forums: http://en.miui.com/forum.php
Did you just signup just to make this tutorial? Lol.
Thanks for the write up.
Nah lol I tried replying to the LS970 MIUI thread but couldnt because I needed 10 posts, I really wanted the ROM and it wouldnt work for me. Once I figured it out I felt other people had problems so I just wanted to help, might as well. Thanks though
renold458 said:
Hey guys, today I have a tutorial for anyone attempting to install MIUI v5 for the LG Optimus G LS970. I myself was totally hooked on this ROM seeing as it is totally different from Android yet still holds true to a lot of what Android is. Some setbacks are that this runs on Android JellyBean 4.2, a little dated for certain people and also not all options work, and you can scour around to figure out what those are as I personally have not testing everything. I do know that NFC is having problems and some people are having issues with phone services but there are workarounds that I will list in the resources below. Now for the tutorial.
*Note: This is what I did to get this to work based on the information found in the LS970 thread for MIUI v5 (linked below) and my constant attempts to see whats wrong, Im in no way a professional nor a developer just a user who wants to get things done. This may not work for everyone. If your phone messes up, I hold no responsibility as you did this out of your own choice and you have been warned. Credits go to siulmagic for the LS970 port and the work he was able to do with it, hopefully he can continue development. Credits also go to 2nd Sky for providing the basis for the tutorial. Links to their profile will be listed in the resources as well.
--Tutorial--
You will be flashing the F180/E975 ROM version of MIUI v5, and it is said you must install the recovery for the E975 in order to flash a ROM from this device, however this was not needed.
The following files will need to be downloaded:
7-Zip: http://www.7-zip.org/
LS970 MIUI ROM: http://www.androidfilehost.com/?fid=23060877489996359
F180/E975 MIUI ROM: http://rom.miui.com/download/view/359381#top (click the red button to download)
Custom Recovery: http://www.mediafire.com/download/ta3ecb4r4cq0b99/TWRP-2.6.3.0-LS970(sprint).zip (This is the latest TWRP version, but I used version 2.4.4.0, yet I do not think this matters)
Step 1: Install 7-Zip onto your PC. Once you have all files downloaded move all of them to the ROOT of your phone EXCEPT the F180/E975 ROM. This will not work if the files are not on the root as I have come to notice.
Step 2: Open up the F180/E975 ROM with 7-zip (it is a zip file). Navigate to the updater-script file and open it with Notepad (the location of the updater-script is META-INF-->com-->google-->android). To open with Notepad just double click the updater-script file and you will be ask to choose a program, choose Notepad of course. DO THIS ALL FROM THE ZIP FILE, DO NOT EXTRACT ANYTHING.
Step 3: With updater-script open, you will delete the following line:
assert(getprop("ro.product.device") == "e975" ||
getprop("ro.build.product") == "e975");
That includes the semi-colon. Save the file within Notepad and close. Once you close 7-Zip will prompt you that the file was modified and if you would like to save, hit YES. This will now modify updater-script within the zip file. Let that finish and now the zip can be moved to the root of your phone along with the other files. OPEN UP UPDATER-SCRIPT WITHIN THE ZIP TO MAKE SURE THE CHANGE WAS MADE, I GOT AN ERROR WHEN I TRIED FLASHING AND IT WAS BECAUSE 7-ZIP DID NOT SAVE THE MODIFED UPDATER-SCRIPT. CLOSE THE ZIP FILE AND RE-OPEN IT AND CHECK ONE MORE TIME BEFORE TRANSFERRING TO THE ROOT OF YOUR OPTIMUS.
Step 4: Now flash install TWRP. If you do not have a custom recovery to begin with you can download Goo Manager from the Play Store and install through there and update if required. I did a dirty flash of MIUI, meaning I flashed without factory reset or anything. There is no need for GAPPS as they are already built into the ROM. Go into your custom recovery and you will want to flash the LS970 ROM. If all goes well it will install without problems and you can reboot into system and setup MIUI. If you get errors during install or afterwards, try wiping the system within TWRP and try again. All you want to do is just get to the homescreen for MIUI.
Step 5: Once you have been sent into the MIUI homescreen for the first time, you will boot into recovery again and proceed to flash the F180/E975 ROM. There should be no issues and the flash should go smoothly. There is no factory reset or clearing of cache because MIUI takes this as an update to the previous ROM, so when you boot back into MIUI you will go directly to the homescreen. Now, reboot back into recovery for the final time and wipe data then factory reset and reboot into system for a nice clean MIUI v5 setup. Enjoy your new ROM! You can now get OTA updates as well.
--FAQs--
Ask them in the thread, questions will be added to this post as well as their answers and whoever answered it.
--Resources--
Siulmagic's Profile: http://forum.xda-developers.com/member.php?u=517347
2nd Sky's Profile: http://forum.xda-developers.com/member.php?u=5310926
LS970 MIUI ROM Thread: http://forum.xda-developers.com/showthread.php?t=2330690
F180/E975 MIUI ROM Thread: http://forum.xda-developers.com/showthread.php?t=2489976
MIUI Official English Site: http://en.miui.com/
MIUI Official English Forums: http://en.miui.com/forum.php
Click to expand...
Click to collapse
Nice write-up, dude! This is sure to help everyone who wants to run MIUI, including myself. Quick questions, how's it running? Like with data, MMS, SMS splitting, all that good stuff. I know we have some problems with our native build, so does the newer updates fix stuff? And speaking of updates, do they work flash and work properly? Thanks once again!!
Sent from my LG-LS970 using Tapatalk
iamterence said:
Nice write-up, dude! This is sure to help everyone who wants to run MIUI, including myself. Quick questions, how's it running? Like with data, MMS, SMS splitting, all that good stuff. I know we have some problems with our native build, so does the newer updates fix stuff? And speaking of updates, do they work flash and work properly? Thanks once again!!
Sent from my LG-LS970 using Tapatalk
Click to expand...
Click to collapse
My phone is not activated under any carrier so I cannot test things like that. However I can say the camera works generally good, its a stock Android camera and has features youd expect. Focus works fine unlike on the LS970 MIUI build where focus for some reason wouldnt work. Newer updates do fix things and you can few changelogs on the MIUI forums. Unfortunately OTA does NOT work but you do download the update, it just fails to flash and Im currently trying to figure out a workaround. I will post my findings to the OP if I get it to work.
So theoretically, if I go into the updaterscript, and change the APN's, the ROM should work just fine?
-Whiplashh
Whiplashh said:
So theoretically, if I go into the updaterscript, and change the APN's, the ROM should work just fine?
-Whiplashh
Click to expand...
Click to collapse
Might be safer for us to dirty flash over our working build.
Sent from my LG-LS970 using Tapatalk
I changed the apns and set permissions but signal and data didn't work.
Sent from my LG-LS970 using xda app-developers app
nwsteeze said:
I changed the apns and set permissions but signal and data didn't work.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
+1
Sent from my LG-LS970 using Tapatalk
If you dirty flashed the e975 version then it would fail while installing correct? If the updater lines weren't removed I don't see how it wouldn't fail.
Sent from my LG-LS970 using xda app-developers app
I havent tried dirty installing over the LS970 ROM without removing those lines but it does not seem likely to work at all, the ROM is basically being told the phone is an E975 and to update/install E975 firmware. Removing those two lines skips this entirely and the ROM simply flashes. However in the phone information MIUI will display that your phone is an E975 rather than an LS970. As for the APNs attempt that within the ROM, I was told they work but that certain APNs may not for reasons unknown.
Can someone post up the modified file? I only have a cellphone so I can't try this.
My new USB cable comes in tomorrow so I will be able to test my update workaround seeing as my current USB cable does not like transferring files for some reason. If all goes well I will post a modified ROM file for those who cannot do it themselves and people will need to return here for the modified ROM file to flash to update the firmware, or you can download the original firmware from the MIUI website when an update is available and follow the tutorial.
Tried again no dice
Sent from my Optimus G using Tapatalk
---------- Post added at 03:30 PM ---------- Previous post was at 02:46 PM ----------
goast said:
Tried again no dice
Sent from my Optimus G using Tapatalk
Click to expand...
Click to collapse
First ROM works second leaves with no data
Sent from my Optimus G using Tapatalk
I feel like there's more to it than just apns like ril blobs and editing the build prop to get service.
Sent from my LG-LS970 using xda app-developers app
I know in the nexus forums someone has created a zip to flash to install Roms from a different carrier... Seems like what we need too lol
Sent from my Optimus G using Tapatalk
I'm gonna go on my computer soon and play with it to see if I can get it working.
Sent from my LG-LS970 using xda app-developers app
Edit: This guide is what I'm going to be following. http://forum.xda-developers.com/showthread.php?p=43546876
Alright guys here is the zip that worked for me after I tweaked the network in the build prop and deleted the updater script lines. Install the ls970 miui as normal (wipe system,data,cache,dalvik) and after you reboot and get to the homescreen go back into recovery and dirty flash this zip (don't wipe anything). I can confirm that 3g works and gps locks for me. Hope this helps some people who want to give miui a try. Let me know if the download link isn't working. http://www.4shared.com/zip/vZYCphn2/miui_f180_rogue_31122_1f540bef.html?
nwsteeze said:
Alright guys here is the zip that worked for me after I tweaked the network in the build prop and deleted the updater script lines. Install the ls970 miui as normal (wipe system,data,cache,dalvik) and after you reboot and get to the homescreen go back into recovery and dirty flash this zip (don't wipe anything). I can confirm that 3g works and gps locks for me. Hope this helps some people who want to give miui a try. Let me know if the download link isn't working. http://www.4shared.com/zip/vZYCphn2/miui_f180_rogue_31122_1f540bef.html?
---------- Post added at 10:44 AM ---------- Previous post was at 10:37 AM ----------
Sorry for triple posting, but I just wanted to say that I used the apn fix from the Carbon thread I believe and after fixing permissions and rebooting 4g even works this is awesome!
Click to expand...
Click to collapse
Going to try with your zip. Also going to open your zip and look at that updater script lol
Sent from my Optimus G using Tapatalk
---------- Post added at 08:19 PM ---------- Previous post was at 07:46 PM ----------
OK following your directions to the letter I got nothing.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-E975 using Tapatalk
---------- Post added at 08:23 PM ---------- Previous post was at 08:19 PM ----------
goast said:
Going to try with your zip. Also going to open your zip and look at that updater script lol
Sent from my Optimus G using Tapatalk
---------- Post added at 08:19 PM ---------- Previous post was at 07:46 PM ----------
OK following your directions to the letter I got nothing.....
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
Scratch that I do have... Signal but the bars are all gray...
Sent from my LG-E975 using Tapatalk
goast said:
Going to try with your zip. Also going to open your zip and look at that updater script lol
Sent from my Optimus G using Tapatalk
---------- Post added at 08:19 PM ---------- Previous post was at 07:46 PM ----------
OK following your directions to the letter I got nothing.....
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
Weird. I noticed that after installing the new apns and rebooting I got the phone force close and lost service, however with just dirty flashing my zip over the ls970 miui I got 3g at least to work and show service.
Here are the new version, based on KK 4.4.2 - KOT49H.
For Nexus 4 - KOT49H stock roms!
This can be flashed via custom recovery.
A big thanks goes to Erhany for his source files. I have adapted this, for our N4.
If you like it...
Now with grey text (bfbfbf) format and 15dpi high, percent a little bit smaller.
For odex ROMs click here:
cargo_Centerclock+%_without_Batt_Icon_odex_N4_KOT49H.zip (see pic 1)
cargo_CenterClock+Batt_%_links__odex_N4_KOT49H.zip (see pic 2)
cargo_Centerclock+Batt_%_rechts_odex_N4_KOT49H.zip (see pic 3)
cargo_only_Batt_%_links_odex_N4_KOT49H.zip (see pic 4)
cargo_only_Batt_%_rechts_odex_N4_KOT49H.zip (see pic 5)
cargo_only_Batt_%_without_batt_icon_odex_N4_KOT49H.zip (see pic 6)
cargo_only_CenterClock_withStockbatt_odex_N4_KOT49H.zip (see pic 7)
Back_to_Stock_CenterClock+Batt_mod_odex_N4_KOT49H.zip
For deodexed ROMs click here:
cargo_Centerclock+%_without_Batt_Icon_deodexed_N4_KOT49H.zip (see pic 1)
cargo_CenterClock+Batt_%_links_deodexed_N4_KOT49H.zip (see pic 2)
cargo_Centerclock+Batt_%_rechts_deodexed_N4_KOT49H.zip (see pic 3)
cargo_only_Batt_%_links_deodexed_N4_KOT49H.zip (see pic 4)
cargo_only_Batt_%_rechts_deodexed_N4_KOT49H.zip (see pic 5)
cargo_only_Batt_%_without_batt_icon_deodexed_N4_KOT49H.zip (see pic 6)
cargo_only_CenterClock_withStockbatt_deodexed_N4_KOT49H.zip (see pic 7)
Back_to_Stock_CenterClock+Batt_mod_deodexed_N4_KOT49H.zip
===================================================
Installing:
- reboot into CustomRecovery
- flash the correct zip you need (watch for odex and deodexed files)
- reboot
- enjoy
If you like it...
Waiting the Odex.
Same here
Sent from my Nexus 4 using xda premium
What I really want to know is.....Is there a different in the functionality of the systemui.apk from the KRT16O and KRT16S? I use the mod of the KRT16O Version, does it mean I do not have some features of the Android KRT16S-Version? As far as I know there are only some system configurations in the SystemUI.apk.
Waiting for the odex-version too
Great job man!
Sent from my Nexus 4 using XDA Premium 4 mobile app
can't wait for the odex release. thanks in advance!
Sent from my Nexus 4 using XDA Premium 4 mobile app
Excellent job:good:
Waiting for the odex !
chipsjesjeng said:
Excellent job:good:
Waiting for the odex !
Click to expand...
Click to collapse
+ 1 :good:
Is it possible to make the battery text is white over the semi transparent statusbar and grey on the black statusbar??
its little bit weird to see only grey text when the others is grey
iskandar1023 said:
Is it possible to make the battery text is white over the semi transparent statusbar and grey on the black statusbar??
its little bit weird to see only grey text when the others is grey
Click to expand...
Click to collapse
For this we must change smali code. I know not exactly what i must change.
cargobr151 said:
For this we must change smali code. I know not exactly what i must change.
Click to expand...
Click to collapse
Can you write a detailed guide how have you achieved this mod for kitkat? It would help lot of people who want to take this mod forward for different roms when they start to appear. :good:
The original guide I have seen but I think there are few changes from that.
Many thanks @cargobr151. I will be trying this out in a few days.
Off topic question.
Looking through the stock (factory image) rom I notice that classes.dex already exist, as well as the .odex files. Is there any difference between the two?
I have also flashed the percentage to the left of battery. The odex file is still present, and the mod is working great.
Sent from my Nexus 4 using xda app-developers app
Is it possible to include data speed in notification bar?
Sent from my Nexus 4 using XDA Premium 4 mobile app
My rom is stock, I should be using odex right?
spicediablo said:
My rom is stock, I should be using odex right?
Click to expand...
Click to collapse
Tried this and it will force close SystemUI. Got it to work by deleting the odex, but I don't recommend doing this unless you know what you are doing.
If you do try it make a rom backup of the system, and data. That way if you bootloop you can restore system back.
Oh and one more thing make sure you have a backup
Sent from my Nexus 4 using xda app-developers app
---------- Post added at 12:49 AM ---------- Previous post was at 12:43 AM ----------
I forgot to say I'm using dalvik runtime also.
Sent from my Nexus 4 using xda app-developers app
cynnar said:
...Looking through the stock (factory image) rom I notice that classes.dex already exist, as well as the .odex files. Is there any difference between the two?...
Click to expand...
Click to collapse
Yes there is a difference.
Odex files (.odex) are the normal odex files, which can be deodexed.
The classes.dex files within the apk filke are for using ART. (i think)..
Odex files are online.
cargobr151 said:
Odex files are online.
Click to expand...
Click to collapse
Tried now, it works. Thank you so much! :laugh:
---------- Post added at 01:18 PM ---------- Previous post was at 12:59 PM ----------
Mmm there's something wrong, now it always shows 100% of charge.
---------- Post added at 01:41 PM ---------- Previous post was at 01:26 PM ----------
Update: after shutting down the phone, the mod seems working good.
---------- Post added at 01:58 PM ---------- Previous post was at 01:41 PM ----------
Now it stucks another time...
Now it's working another time (after a reboot and a wipe of cache and dalvik), lol
ezio84 said:
Now it's working another time (after a reboot and a wipe of cache and dalvik), lol
Click to expand...
Click to collapse
What about the third time? Does it get stuck again? I wanna try it, the odex zip to just show % but if it's gonna be getting stuck then no. also, I'm using ART, should be OK right?
Sent from my Nexus 4
WarpDrive 4.4.2 T-Mobile - Bringing the Galaxy to you!
FEATURES:
- Odexed (Suposedly faster)
- Volume keys enabled for lockscreen
- Any widget on lockscreen
- Allow any font to be used
- Infinite widgets on lockscreen
- Completely DEBLOATED! If you need something just ask I'll get it working!
- Init.d support and tweaks
- WarpDrive app and tweaks MUST ENABLE IN XPOSED
- Xposed Support
- WiFi, USB, and Bluetooth Tethering all work
- KNOX Free
- Allow any app to use the External Micro SD card
- CarrierIQ removed
- Pre-rooted
- Busybox
- Many more
INSTALLATION INSTRUCTIONS:
1. Download
2. Press thanks even donate if youre generous enough
3. Backup using TitaniumBackup, and/or make a nandroid
4. Reboot to recovery
5. WIPE YOUR DATA
6. Did you remember to wipe your data?
7. Have you factory reset yet?
8. Install my ROM
9. Reboot
10. Profit
THANKS TO:
- @ktoonsez for his awesome kernel
- @rovo89 for his awesome Xposed framework
- Jovy for his tethering info
- Everyone here on XDA for the sharing of all their tweaks!
WHATS NOT WORKING:
- So far everything is working as it should. I love it! Let me know if you have any issues.
TO DO?
- More mods
- More optimization (framework stuff)
- Anything you guys request.
DOWNLOAD ATTACHED APK AND INSTALL IF YOU WANT THE CUSTOMIZATIONS!!!!
PLEASE CLICK THANKS! Even donations are HIGHLY appreciated. Us developers require a lot of time to work on these. I thank all you guys for the continued love
DOWNLOAD:WarpDrive T-Mobile 4.4.2 v1.0.1.zip AndroidFileHost
MD5: 036834286b361ad26682b3881fdd2f62
WarpDrive T-Mobile 4.4.2 v1.0.1.zip Mega
BLOAT AROMA INSTALLER
WarpDrive bloat installer
CHANGELOG:
3.17.14 v1.0.1
- Fixed a bunch of issues
- Added option to allow the volume keys to work on the lockscreen.
3.15.14 v1.0
- Initial Release
Nice to see kk stock rom
Is it recommended to Odin new modem to take full advantage ?
Sent from my GT-I9505G using Tapatalk 4
Netuser said:
Nice to see kk stock rom
Is it recommended to Odin new modem to take full advantage ?
Sent from my GT-I9505G using Tapatalk 4
Click to expand...
Click to collapse
I got these answers:
http://forum.xda-developers.com/showthread.php?t=2682541
imanextreme said:
Ha tricky tricky. Do you have screenshots you can post while we wait?
Click to expand...
Click to collapse
Its just TouchWiz stock. So there isnt anything special really.
xperia_88 said:
Thanks for your work, I'll try it.
Instruction and link to NB4 is welcome ....I found this modem and hope it is ok with your rom:
http://forum.xda-developers.com/showthread.php?t=2678774
Click to expand...
Click to collapse
Any MK2 or higher modem is needed.
xperia_88 said:
I got these answers:
http://forum.xda-developers.com/showthread.php?t=2682541
Click to expand...
Click to collapse
Thanks
Any chance we can get a rom with all the GS5 changes included? It would be cool to have a rom where my phone would look like the S5 There would really be no reason to upgrade then.
Yes I love that new toggle and notification drop down of S5. I hope it comes to s4 (not just theme)
Sent from my GT-I9505G using Tapatalk 4
BoboBrazil said:
Any chance we can get a rom with all the GS5 changes included? It would be cool to have a rom where my phone would look like the S5 There would really be no reason to upgrade then.
Click to expand...
Click to collapse
Netuser said:
Yes I love that new toggle and notification drop down of S5. I hope it comes to s4 (not just theme)
Sent from my GT-I9505G using Tapatalk 4
Click to expand...
Click to collapse
If i can get a system dump then quite possibly.
Download added to second post
[email protected] said:
Downlpading now.
Sent from my GT-I9505 using Tapatalk
---------- Post added at 07:51 PM ---------- Previous post was at 07:50 PM ----------
Small file!!
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Its debloated But some things certain users may rely on may not be there. in that case, i will create "update" zips for those certain things.to work. I wanted to keep it as basic as possible.
why does this keep failing to install on twrp 2.7.0.0
emd2009 said:
why does this keep failing to install on twrp 2.7.0.0
Click to expand...
Click to collapse
No data file included. No update script. forget something?
rubbamade said:
No data file included. No updater.zip. forget something?
Click to expand...
Click to collapse
where do i find those files? i am using the link from op
788/943MB and my computer decided to drop its connection to androidfilehost. Torrents don't do that
Seriously though @elesbb, thanks for bringing Warp Drive to 4.4!
elesbb....can you just post the data file...we can push it to the rom.zip
it would be way faster than a complete re-upload.
---------- Post added at 03:00 AM ---------- Previous post was at 02:54 AM ----------
maybe that's not it...did anyone else get this to flash?
rubbamade said:
elesbb....can you just post the data file...we can push it to the rom.zip
it would be way faster than a complete re-upload.
---------- Post added at 03:00 AM ---------- Previous post was at 02:54 AM ----------
maybe that's not it...did anyone else get this to flash?
Click to expand...
Click to collapse
What are you talking about when you say "data file?" I'm just curious...
Keep getting flash error fail. I flash twrp 2.5.1,2.6.3.1 and phillz recovery all getting the same error.
Sent from my C6916 using Tapatalk 2
lordcheeto03 said:
What are you talking about when you say "data file?" I'm just curious...
Click to expand...
Click to collapse
when I tried to flash it. it said cannot locate "/data" update script.
its probably a simple line of code somewhere in the updater script causing the fail.
epsix said:
Keep getting flash error fail. I flash twrp 2.5.1,2.6.3.1 and phillz recovery all getting the same error.
Sent from my C6916 using Tapatalk 2
Click to expand...
Click to collapse
I haven't tried flashing yet; the dl failed and I'm only just halfway again :\
What's the error you're getting?