Develop Bugs

Aluminium case for Universal

Has anyone tried the aluminium case for universal? Will appreciate user opinion as I intend to go for one.

d_ranade said:
Has anyone tried the aluminium case for universal? Will appreciate user opinion as I intend to go for one.
Click to expand...
Click to collapse
I'd also be interested in the answer to this, please!

I have an aluminum case for my vodafone v1640, I find that its ok although a bit of a pain when you're using the phone. Also you can't open it flat when you are charging it. But I can put up with that as I like the protection it gives what is an expensive bit of kit.

Triptych said:
I have an aluminum case for my vodafone v1640, I find that its ok although a bit of a pain when you're using the phone. Also you can't open it flat when you are charging it. But I can put up with that as I like the protection it gives what is an expensive bit of kit.
Click to expand...
Click to collapse
Thanks. That counts it out for me.

I got a new aluminium case of flea bay for 99p + p&p of course.
I got it to protect my MDA Pro as I carry it in a work bag, its versatile as it opens flat (unless you have ear phones or usb plugged in), the case grips the keyboard part of the PPC but not the screen so you can twist the screen either way without hassle and. All the buttons round the edge of the ppc are accessable even when the case is closed, there are holes cut out for the camera & flash, but you can not see the whole of the display with the screen flipped and the lid of the case closed.

Aluminium case too heavy for the belt clip
I have used an aluminium case for a while because it seemed very practical, I have worn it with its belt clip. The problem was that the case was too heavy for the plastic belt clip and one day it suddenly broke at the weakest point. There was no mechanical impact, one part of the plastic simply peeled off from the other one and the case felt down.

Thank you all. I have made up my mind. Basically I am looking for protection. I am presently using an unbranded leather case with non removable belt clip. As I keep my exec in the pocket the clip is bit of an inconvenience as the exec can not be kept flat on a surface without removing the case!

I don't know what it's like for you guys around the world, but certainly in UK the accessories are awful, especially the case... couldn't believe after buying such an expensive unit, that's the best they could come up with!

SpyderTracks said:
I don't know what it's like for you guys around the world, but certainly in UK the accessories are awful, especially the case... couldn't believe after buying such an expensive unit, that's the best they could come up with!
Click to expand...
Click to collapse
It is the same here and the ads are quite misleading. Very often the material supplied is not what is shown in pictures. Unfortunately, the choice here is also very limited.

[Q] Any Case that covers the camera?

Ok, I searched and didn't find any other requests for this... but does anyone know of any cases that provide for a sliding type cover for the camera? I ask because I currently have one of those rubberized type covers and it's fine, except that without fail, the hole where the camera is always ends up getting dust and crap in it so that in order to take a decent pic, I have to bend the case back and clean it off.
Sure, not a big deal or effort, but would rather just have something covering it so that, like the usb connector, could just be slid open when needed.

not 100% on it, but with my Defender series for my Iphone 3gs (had that before captivate) there was a cover over the camera. I'd guess that they'll do the same for this. Only crappy part is that the damn case isn't out yet so we can't know for sure. I'm hoping they'll release it soon.
also check out the seidio cases, one of them (rugged or active x) may have a cover over the camera...

Thanks... doesn't look like the defender case for the Captivate has a cover either. Oh well, not the end of the world... just a nice to have that I was hoping to find.

Samsung Galaxy S2 Mesh Vent Case - thoughts?

Since a fair few of you will now have one of these, I was just looking to get some thoughts and opinions on one please?
Also I know it can stand vertical with this case on, but can it stand landscape?
Thanks

U can do everything without any trouble, it's a great case.
Sent from my GT-I9100 using XDA Premium

TecQuality said:
U can do everything without any trouble, it's a great case.
Sent from my GT-I9100 using XDA Premium
Click to expand...
Click to collapse
I've seen that it can stand vertical on it's own when the case is on, I was wondering if it could stand landscape too?
Thanks
Sent from my GT-I9100 using Tapatalk

Yeah, it's a great little case. I bought the black one, and i'm looking at getting a blue one next. Really cheap for official ones from Trusted Sellers on ebay (roughly £7 without original packaging, £10 with)

the only downside is it lets dust through the little holes, so you get a neat little dust pattern on the back side of your phone - a regular removal and wipe on your trousers helps.

I've had one on it for about 2 weeks and I like it, only drawback is I had to shave down by USB connector plastic to get it to fit while the case is still on. I ordered another from dealextreme because it was really cheap. I notice the case just touches the mic area but doesnt cover it up. I like it because it's not very bulky and the plastic 'mesh' back fits over a soft case and makes it rigid and easy to hold.

Good luck for u

Got a generic cheap mesh case from eBay, its pretty awesome but as mentioned above, gets a bit dirty after some long time, and mine is cheap enough to start breaking on corners, had a few falls tho, and that's the purpose of a case, so the phone doesn't break instead

I had this case, it was okay at the start but in the end the plastic on the top corner started breaking away. Also the one and only time I dropped my phone with this case on I got a nasty scratch just above the screen where there was no protection. I had to ditch it. I'm using a plain black tpu case now, much more protection. The advantage of the mesh case is that its so slim.
Edit : Oh yea and its a dust magnet.

Got the original mesh case, I dropped it twice since I got it. First time no damage at all, protected the phone nicely. Second time the phone popped out of the case as it hit the floor (shoulder hight, had a nice spin to it also) but both the case and the phone didn't suffer any damage. So I guess it serves it's purpose and looks nice as well.

Aesthetically nice.
Crap if you want proper protection.

I bought it merely to protect the camera and back when I put the phone down to prevent scratching. For overall phone protection it's definitely going to be lacking as the top and bottom edges of the phone aren't covered. The case clips on easily but stays on fairly tightly. The rubbery material gives better grip when holding the phone. Dust does get in over a week or so over the back of the phone, though isn't noticeable with the case on, and can easily be wiped off. I think the case looks pretty nice, all key areas are fully accessible and for the price of about £8 was worth it.

is not compatible for i9100P
I've just buy the genuine Samsung mesh vent case for my Samsung Galaxy S2 win NFC (i9100P) but it is NOT compatible. My colleague on the i9100, not NFC, perfect fit.
Some ideas?

Light, strong and keeps the thinness we all love about our S2s!
Dropped mine a couple of times on to wooden floors and no damage yet
Protects the camera lens too when lying on a flat surface
The dust comments are true but only noticeable when u take the cover off so no big deal and it fits so snugly it kinda looks part of the phone!
To answer original question tho, no only stands in portrait

I got an official Samsung one given with mine. Good at protecting from scuffs when it's on a table or desk but wouldn't like to trust it with protecting my phone from a fall.
That's why it's sat unused in a cupboard at work! If anyone wants it just message me and I'll stick in the post.

Andrewawright said:
I got an official Samsung one given with mine. Good at protecting from scuffs when it's on a table or desk but wouldn't like to trust it with protecting my phone from a fall.
That's why it's sat unused in a cupboard at work! If anyone wants it just message me and I'll stick in the post.
Click to expand...
Click to collapse
I'll take the case if it's on offer, let me know your thoughts on shipping to Australia Figure you sent all your convicts here, so a case shouldn't be a problem

Incipio Dual Pro Case Available NOW for Z3C

Two sources at Incipio confirmed that they will have a Dual Pro case
AVAILABLE NOW for order:
http://www.incipio.com/cases/smartp...phone-cases/sony-xperia-z3-compact-cases.html
Looks like they covered all Ports except USB.
Might have been better to leave only Mag Port open.
But protection especially if lip above glass is up 1/32" above screen- can you tell ?
Similar to the one they now have for Z1C.
http://www.incipio.com/cases/smartp...ases/dualpro-case-sony-xperia-z1-compact.html
This is the best protection I have seen so far .....
Any experiences with Dual Pro for Z1 , Iphone 5, etc ?

robertkoa said:
Two sources at Incipio confirmed that they will have a Dual Pro case
available soon for Z3 Compact.
Similar to the one they now have for Z1C.
http://www.incipio.com/cases/smartp...ases/dualpro-case-sony-xperia-z1-compact.html
Possible by end of October, but no guaranteed date.
This is the best protection I have seen so far .....
Any experiences with Dual Pro for Z1 , Iphone 5, etc ?
Click to expand...
Click to collapse
Thanks for posting this - looks like a sweet case I would personally be glad if they left the magnetic charge port open, as well as the power, volume and camera keys. AFAIC the waterproof flaps can be completely covered :good:
Perhaps if we all put forward our ideas here, @robertkoa could point his contact(s) at Incipio towards this thread for some free input on the design... :good:

That's pretty sweet. Although I'm trying to find a hard shell case that also has access to the magnetic ports. I wonder if that's just not structurally possible?

Ya I would imagine you would be comprising the impact dispersion by cutting out pieces of material. Of course its possible to cut as much material as you want, but functionally it won't be the same.

zoome9 said:
That's pretty sweet. Although I'm trying to find a hard shell case that also has access to the magnetic ports. I wonder if that's just not structurally possible?
Click to expand...
Click to collapse
This company seems to be working on a Z3C hard case that will work with the DK48 magnetic charger
case-mate [dot] com/Sony-Xperia-Z3-Compact-Cases/Case-Mate-Sony-Xperia-Z3-Compact-Tough-Cases.asp
Sorry, can't post URLs because I created a new account (replace [dot] with .)

The Case Mate tough case goes to the other extreme to the Incipio design and leaves way too much open IMO. Almost the entire left side of the phone is unprotected, which doesn't fill me with confidence. If the Incipio version is anything like the Z1 model then it will go to the other extreme and leave just the USB/SD door uncovered.
I guess that's the big conundrum for case manufacturers designing for this phone -- leave everything uncovered and compromise protection, or have better protection but no dock compatibility. Very few seem to be taking the middle ground and just leaving the mag port open, which I suppose is understandable since I doubt many people will bother getting a mag charging cable or dock.

pipspeak said:
I guess that's the big conundrum for case manufacturers designing for this phone -- leave everything uncovered and compromise protection, or have better protection but no dock compatibility. Very few seem to be taking the middle ground and just leaving the mag port open, which I suppose is understandable since I doubt many people will bother getting a mag charging cable or dock.
Click to expand...
Click to collapse
Actually I think many people (like me) go for the magnetig charging cable/dock for two main reasons: one, this way you don't risk to destroy the usb flap's water sealling in time and 2, you protect the device by reducing the risk to knock it on the floor if you trip on the charger I never charged it with a USB cable and it hits 100% way faster than my old HTC One M7. I got this smoke tpu case with a nice textured back to improve the grip www.jekod.com/en/cp_view.php?id=87 but I do look forward to the Incipio release. Actually, I would love to get a case with only the magnetic charging port open for better protection if I eventually use it in water.

Incipio Dual Case for Z3 C
I honestly don't have a high on the food chain Source at
Incipio to have any Input on the Design etc.
But they will have a Dual Pro out for Z3 C probably next week.
Confirmed through two people there about 3 weeks apart .
All we can do is see what they have done with Z1 Compact and
guess.
They said Dual Pro so high level of protection though not Mil Spec
like the Alpha Pelican Case ( Pelican is bulky though ) .

Impact Dispersion is an excellent Term to describe
what often happens with Tempered Glass Screen
Protectors.
I have talked to at least 10 people at AT&T , TMobile , Expansys etc. etc. and i t's surprising
that they have seen or experienced cracked glass Protectors and Shattered Glass Protectors with no screen damage underneath.
So Tempered Glass front AND back for Z3C AND a
Case is best, IMO.
And with no case Glass Protectors front and back , though I don't know who makes a Dual Kit , maybe try precutting Camera and Flash holes
for back using a " Front " ?

catalindan said:
Actually I think many people (like me) go for the magnetig charging cable/dock for two main reasons: one, this way you don't risk to destroy the usb flap's water sealling in time and 2, you protect the device by reducing the risk to knock it on the floor if you trip on the charger I never charged it with a USB cable and it hits 100% way faster than my old HTC One M7. I got this smoke tpu case with a nice textured back to improve the grip www.jekod.com/en/cp_view.php?id=87 but I do look forward to the Incipio release. Actually, I would love to get a case with only the magnetic charging port open for better protection if I eventually use it in water.
Click to expand...
Click to collapse
I'll also be using magnetic charging, but like everyone at XDA I'm probably a bit more techy than the average buyer :laugh: I love the description for the Jerod case... " not only protect your mobile phone, but also improve your taste in your friends". Have you found your taste in friends has improved since owning it?! :laugh:
FYI, the Cruzerlite case only has the magnetic port cut out on that side of the phone but it also has that silly "bugdroid" design on the back, which probably won't improve one's taste in friends!

LoL Didn't notice the description. I searched the product's page just to show you guys, after getting it localy for about 3euros. Good to know that about the cruzelite case because the pictures I have seen only show the bugdroid back. And yes it is silly

Case without cutouts for flaps

Hi!
I'm looking for a case without cutouts for the flaps, only for the magnetic charger.
Does anyone know where to find these?
Thanks!

The cruzalite bugdroid cases do not have the port cuttouts i think.

Heartkingz said:
Hi!
I'm looking for a case without cutouts for the flaps, only for the magnetic charger.
Does anyone know where to find these?
Thanks!
Click to expand...
Click to collapse
Like someone else mentioned the Cruzerlite case which is available on their website or on Amazon.
The RhinoShield bumper will also have the flaps covered if they get enough Pre-orders to produce it. http://www.evolutivelabs.com/pages/crashguard-sony-z3-compact
http://www.evolutivelabs.com/blogs/news/15830813-rhino-shield-crash-guard-z3-compact-renders

I, too, am looking for a similar case. I'd like something like the Incipio Dual Pro that leaves open only the headphone jack and the magnetic charging port. It just seems to me that leaving open the area surrounding the USB port and microSD card slot just wouldn't be good for overall protection. Bumpers also don't protect the rear of the phone, just the edges. I guess that basically leaves me with the Cruzerlite...

Exactly, I think we need to wait a little bit longer for more cases like this, unless someone has a good suggestion ofcourse.

I'm also looking for this, since my wifes microsd and USB port flap will come open up by itself many times in a day.

I would give great money for the Puro covering all flaps. Best so far. But unable to make contact with them.

I would like to buy a cruzerlite, but I hate the design on the back. Would love to find a similar one that's just plain.

Biggest issue of the cruzerlite is it's off the best screen protectors. Personally I also don't like the finish of the sides. Feels cheap.

Yeah the cruizerlite looks like a good case, but it is a little bit translucent right? Don't like that..
The magnetic charger is such an easy method to charge your phone without pulling the flap.
It is a little bit of a hassle in the beginning but you'll get used to it!
I also pre ordered the Rhinoshield. I hope they get enough pre orders because that's gonne be one badass case for our Z3C:good:

The black CruzerLite Bugdroid case is opaque.
Like others, I wish it didn't have the goofy design on it, but otherwise it seems nice. I'd rather have it cover the buttons, though, because the tiny isthmus of TPU between the power and volume buttons looks horrible (like it isn't fused into one piece right there). Otherwise, it's a decent case.

Do you guys know of any new cases that came out without flap cutouts? I'd buy the Bugdroid case but the design is bugging me too much...
It's a pity the RhinoShield didn't get produced in the end...