Hey guys,
I might be wrong here but this is my last hope.
Rooted my One X yesterday, tried to install a .zip so that annoying menu bar would go away.
Didn't word out well, got in a 'bootloop', decided to install the stock RUU, but im getting this ERROR 120 30% massage.. i already tried different stuff but nothing seems to work.
Then things got worse, decided to let it charge for a while, but now i can't even get in recovery mode, it redirects it to fastboot.
Thnx in advance
You will need to relock the bootloader to flash the stock ROM
From fastboot do "fastboot oem lock" then try again. Try flashing from Fastboot and if that doesn't work try bootloader.
Alternatively, flash custom recovery and try flashing over original versions of the whatever files you replaced with your modification.
Electronic Punk said:
You will need to relock the bootloader to flash the stock ROM
From fastboot do "fastboot oem lock" then try again. Try flashing from Fastboot and if that doesn't work try bootloader.
Alternatively, flash custom recovery and try flashing over original versions of the whatever files you replaced with your modification.
Click to expand...
Click to collapse
Already relocked the bootloader, installing RUU rom in bootloader, got same ERROR 120 massage.
Though i had a custom recovery, apparently i dont (im a noob), but i cant even get in the recovery mode.
Already reinstalled stock recovery...
TheNetherTukkers said:
Already relocked the bootloader, installing RUU rom in bootloader, got same ERROR 120 massage.
Though i had a custom recovery, apparently i dont (im a noob), but i cant even get in the recovery mode.
Already reinstalled stock recovery...
Click to expand...
Click to collapse
Corrupt RUU?, try downloading it again...
Are you sure you downloaded the correct RUU for the region of your device?
Tony Tan said:
Are you sure you downloaded the correct RUU for the region of your device?
Click to expand...
Click to collapse
If you are certain your ruu is for your region and not corrupted then from http://forums.androidcentral.com/ge...o-get-error-120-battery-less-than-30-a-2.html
Try this
Running Windows 7:
Make sure battery is over 30% (but that's why we're here, isn't it? It IS over 30%) Turn phone off Take battery out for a minute, then replace the battery DO NOT turn phone back on Plug into USB Hold VOL DOWN button and press the power button for 5 Seconds but don't let go of VOL button Make sure the choice FASTBOOT is highlighted and press the power button to select it You should see FASTBOOTUSB up top Stay on this screen while you go to your computer Exit HTC Sync if it's running, wait a minute, then open HTC Sync again, see if it connects (Mine didn't connect to sync, but I left the window open in the bkgrd) Open the updater and go through the steps. Update should begin without error message.
Hope this works for you guys. I tired countless ways to do it before breaking down and calling in. This way worked the first time for me.
Sent from my HTC One X using xda premium
If you relocked you also need to flash boot.img in fastboot from the stock rom you want to use.
Extract the ruu.exe and take the boot.img out, flash it using the adb tools and fastboot.
TheNetherTukkers said:
Already relocked the bootloader, installing RUU rom in bootloader, got same ERROR 120 massage.
Though i had a custom recovery, apparently i dont (im a noob), but i cant even get in the recovery mode.
Already reinstalled stock recovery...
Click to expand...
Click to collapse
Laurentius26 said:
If you relocked you also need to flash boot.img in fastboot from the stock rom you want to use.
Extract the ruu.exe and take the boot.img out, flash it using the adb tools and fastboot.
Click to expand...
Click to collapse
Where can i find my radio version? And cant find any boot.img in my RUU file.
It's called 'boot_signed.img'
The radio I don't know.
TheNetherTukkers said:
Where can i find my radio version? And cant find any boot.img in my RUU file.
Click to expand...
Click to collapse
Laurentius26 said:
It's called 'boot_signed.img'
The radio I don't know.
Click to expand...
Click to collapse
Can't find it, but i cannot go into recovery mode, wich makes me think there is something seriously wrong..
TheNetherTukkers said:
Already relocked the bootloader, installing RUU rom in bootloader, got same ERROR 120 massage.
Though i had a custom recovery, apparently i dont (im a noob), but i cant even get in the recovery mode.
Already reinstalled stock recovery...
Click to expand...
Click to collapse
Perhaps ur battery is less than 30%.
Sent from my HTC One X
TheNetherTukkers said:
Can't find it, but i cannot go into recovery mode, wich makes me think there is something seriously wrong..
Click to expand...
Click to collapse
To extract contents from an RUU, do this.
Run the desired RUU
Go to search and type in '%temp%' (without the quotes)
A folder named 'temp' will appear, open that, and search in it for 'rom.zip'
Open the zip, and extract what u jeed from there.
And hit thanks!
Sent from my HTC One X
@TheNetherTukkers, extract the boot_signed.img as theDroidfanatic beautiful explains.
Attached I have the adbtools, extract and put the folder on your desktop's c:\ together with boot_signed.img
So you have c:\adbtools\
adb.exe
AdbWinApi.dll
fastboot.exe
boot_signed.img
Now put your device in fastboot mode and connect to your pc.
In start\search on your pc type 'cmd' without the quotes and hit enter.
In the command window that pops up browse to c:\adbtools and type the following:
fastboot flash boot boot_signed.img [hit enter]
fastboot erase cache [hit enter]
After this you go into fastboot again and flash the ruu.
got this,
c:\Android>fastboot flash boot boot_signed.img
sending 'boot' (4288 KB)...
OKAY [ 0.563s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 0.766s
Got everything adb java etc already installed..
waz675 said:
Try this
turn phone off Take battery out for a minute, then replace the battery
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
are you sure?
Are you sure your phone is relocked?
Which ruu are you trying to flash?
TheNetherTukkers said:
got this,
c:\Android>fastboot flash boot boot_signed.img
sending 'boot' (4288 KB)...
OKAY [ 0.563s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 0.766s
Got everything adb java etc already installed..
Click to expand...
Click to collapse
Laurentius26 said:
Are you sure your phone is relocked?
Click to expand...
Click to collapse
Pretty sure, it says ***** RELOCKED ****** in bootloader..
RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.11_Radio_1.1204.105.14_release_260491_signed, is the RUU im trying to flash.
Hmmm, that's strange.
You have a branded HTC One X?
And which rom are you trying to flash?
Try >> THIS link, it's the 1.29.401.11 version, credits to Football for the RUU.
TheNetherTukkers said:
Pretty sure, it says ***** RELOCKED ****** in bootloader..
Click to expand...
Click to collapse
Laurentius26 said:
Hmmm, that's strange.
You have a branded HTC One X?
And which rom are you trying to flash?
Try >> THIS link, it's the 1.29.401.11 version, credits to Football for the RUU.
Click to expand...
Click to collapse
I dont think its branded.. i mean i got it from Vodafone (holland) but i dont see a special RUU for that anywhere so i figured i had the genereal european version.
You must be sure about that because there do exist Vodafone updates.
Have a look HERE at the bottum, Vodafone roms for several countries. No Dutch dho.
Did you buy the phone straight from Vodafone or did you use a retailer?
Maybe you could check with them?
TheNetherTukkers said:
I dont think its branded.. i mean i got it from Vodafone (holland) but i dont see a special RUU for that anywhere so i figured i had the genereal european version.
Click to expand...
Click to collapse
Related
Hello,
I have now completely made my PrimoU useless.
For weeks I try to get the CM10 from Lloir working but it never got over the booting screen. So I tried several things, but never came further. Flashing back to my first rom always worked. I tried to unlock bootloader again (thought, maybe it isn't) but it was unlocked. Therefore I tried to lock it to maybe start from scratch.
That was a big mistake, because since then, I am stuck on bootloader. On the top in pink is written "Relocked" "Security warning". No recovery, no starting to the software. I gave it up.
Can anyone help me? I only have a Mac. Is there ANY possibility to just set the whole phone back to Factory form? So no bootloader unlocking, no custom rom, no recovery? I am really thinking about changing it back to this and maybe sell it afterwards. I used HTC Desire for two years with several custom roms and everything. Always could work with it. This device is unfortunately not the same.
But at first I hope anyone can help me to get this back booting with Mac?
Thanks to you all in advance
Moved to Q&A. Please ask all questions there.
Try this ./fastboot-mac flash unlock Unlock_code.bin
You have unlocked it again
You should have it in your email...
Then download the latest boot.img and zip file from cm10 and transfer the Rom zip to your sdcard....
Check development section for cwm recovery 6...download and rename it to recovery.img
Flash it by
./fastboot-mac flash recovery recovery.img
Flash boot.img by renaming it and
./fastboot flash boot boot.img
Go to recovery and flash the cm10 zip file....
Sent from my HTC One V
shubhamchamaria said:
Try this ./fastboot-mac flash unlock Unlock_code.bin
You have unlocked it again
Click to expand...
Click to collapse
Thank you for your help! But the problem begins here. I get the message
Erkan-Ertans-MacBook:fastboot Erkan$ ./fastboot flash unlocktoken Unlock_code.bin
error: cannot load 'Unlock_code.bin'
tekillo said:
Thank you for your help! But the problem begins here. I get the message
Erkan-Ertans-MacBook:fastboot Erkan$ ./fastboot flash unlocktoken Unlock_code.bin
error: cannot load 'Unlock_code.bin'
Click to expand...
Click to collapse
Do you have the Unlock_code.bin?
soham_sss said:
Do you have the Unlock_code.bin?
Click to expand...
Click to collapse
Yes I do. I went through the whole procedure..
tekillo said:
Yes I do. I went through the whole procedure..
Click to expand...
Click to collapse
U need to put in the path of the unlock code....try this ...type the command and instead of Unlock_code.bin just drag that file onto the terminal screen....them it should work
Sent from my HTC One V
shubhamchamaria said:
U need to put in the path of the unlock code....try this ...type the command and instead of Unlock_code.bin just drag that file onto the terminal screen....them it should work
Sent from my HTC One V
Click to expand...
Click to collapse
Thank you all, I used this way:
I installed Virtualbox to use a xp system to unlock bootloader again.
After that I still wasn''t able to install CM10. Whatever I do, it always sticks at the bootscreen.
I then tried the new Modaco Vanilla Rom, and it worked without ANY problems. Now I use this for start... It seems as Jelly Bean is not possible for me...
relocked security warning
I have instaled now MAximus 4.0
i tried to instal JB Maximus 4.1
i have cidnum: HTC__032
after "relocked" i have "security warning"
i watch "Video tutorial: (thanks Flow-Wolf)"
i see that he have HBOOT 0.43
i have 1.12 is there a problem?
i tried fastboot clear cache, charging over 30% but i can't install PJ46IMG, i tried adb reboot oem-78 and i get error no device found, i have the latest Fastboot Kit V4.1, CWM 5840...
nothing i'm stucked
But i can unlock and now i came back to Maximus 4.0
What cand i do. Help!!
you got the wrong forum dude
Sent from my One V using xda premium
Your problem with CM10
The problem was probably you didn't flash the kernel because if you did then you would have to flash a stock kernel to return to your original rom. Just some advice for future reference
I have searching for a solution here for last 2 days but couldn't find one
Problem :
My one x is displaying black screen with silver "htc" logo. It does not boot in bootloader or recovery. Although fastboot commands are still running on this blackscreen.
What I did
I successfully unlocked my one x and installed paranoiandroid but when I started using it my phone began to hang and the touch was disable.
Then I read the post for getting bavk to stock using RUU. I followed these step.
- checked my phone version using "fastboot getvar version-main"
- downloaded "RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed"
- unlocked the bootloader "fastboot oem lock"
- Ran the RUU exe file.
Now the RUU is giving an error the RUU is not correct but it is the same version which I get from "fastboot getvar version-main" and now my phone is only displaying the black screen with sliver "htc" logo.
I shall be grateful if someone can provide a solution to my problem. Thank you.
try 'fastboot reboot-bootloader' or 'fastboot oem reboot-bootloader' (forgot which one).
Then try find a correct RUU to flash or just flash a custom ROM.
tomascus said:
try 'fastboot reboot-bootloader' or 'fastboot oem reboot-bootloader' (forgot which one).
Then try find a correct RUU to flash or just flash a custom ROM.
Click to expand...
Click to collapse
Thank you for the reply.
I have tried it. The command executes but the phone again boots in blackscreen with silver "htc" logo. It is not going in bootloader.
If you re-run the command fastboot getvar version-main, will it give you the same no. 2.17.707.3 ?
ckpv5 said:
If you re-run the command fastboot getvar version-main, will it give you the same no. 2.17.707.3 ?
Click to expand...
Click to collapse
Yes it is giving the same version and I have downloaded the exact RUU version still RUU fails to complete its setup stating "not correct RUU, download the correct file"
I was searching for a solution and found that RUU setup also works if the RUU version is an updated version with same region e.g x.xx.707.x.
I have downloaded RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed. Should I try this?
sherwaniusman said:
I was searching for a solution and found that RUU setup also works if the RUU version is an updated version with same region e.g x.xx.707.x.
I have downloaded RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed. Should I try this?
Click to expand...
Click to collapse
Good luck! :laugh:
tomascus said:
Good luck! :laugh:
Click to expand...
Click to collapse
No luck same error occurred.
Mind if i asking? Do u just run the RUU or u flash boot_signed.img etc etc first?
Sent from my HTC One X using xda premium
serwan said:
Mind if i asking? Do u just run the RUU or u flash boot_signed.img etc etc first?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I unlocked the bootloader and ran RUU.exe file from my computer. The setup begins and error occurs while flashing the rom image
I think you should reinstall the HBoot manually...
What CID do you have?
Is your Bootloader "relocked" ??
andyoso said:
I think you should reinstall the HBoot manually...
What CID do you have?
Click to expand...
Click to collapse
How to reinstall the Hboot?
sherwaniusman said:
I unlocked the bootloader and ran RUU.exe file from my computer. The setup begins and error occurs while flashing the rom image
Click to expand...
Click to collapse
U need to RELOCKED your bootloader.
Please google how to extract boot_signed.img , recovery_signed.img and rom.zip from RUU. After u've extract those, flash boot_signed and recovery_signed first. Then boot to recovery, flash your rom.zip and only after that u run the RUU. Give it a try.
Sent from my HTC One X using xda premium
sherwaniusman said:
How to reinstall the Hboot?
Click to expand...
Click to collapse
You should download it before...if you give me your CID pass you the correct link to download the correct "firmware.zip" that contains the HBoot.
After the downloading you should type this command twice:
fastboot flash zip firmware.zip
Click to expand...
Click to collapse
andyoso said:
You should download it before...if you give me your CID pass you the correct link to download the correct "firmware.zip" that contains the HBoot.
After the downloading you should type this command:
Click to expand...
Click to collapse
Thank you. My cidread returns HTC_044. Also I have logged into bootloader screen again. I just ran the Unlock_bin file I received during rooting my device and now my phone isn't displaying the black screen and finally entered bootloader.
The problem I figured out was my bootloader was relocked and my RUU setup failed, so I had a custom rom installed with locked bootloader. That's why the phone was bricked I wan't entering bootloader.
Now I can access my recovery as well.
serwan said:
U need to RELOCKED your bootloader.
Please google how to extract boot_signed.img , recovery_signed.img and rom.zip from RUU. After u've extract those, flash boot_signed and recovery_signed first. Then boot to recovery, flash your rom.zip and only after that u run the RUU. Give it a try.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
You don't need to extract anything from the ruu, if you have the right ruu just lock the bootloader and leave the phone there ... Start the ruu from pc with admin rights.....
Im speakung from my experiance. I have face this problem before. RUU program cant install the rom. So i have to flash everything extracted from RUU first. Only after that the RUU can install the rom. But maybe im just got lucky though.
Sent from my HTC One X using xda premium
Hi All,
This is my very first post, I received 2 updates for my device yesterday, 1 being the updated Hboot and the other the JB rom (about time HTC)
I have a rooted One X CID 001 and previously tried flashing a custom rom and failed (got caught in a horrible bootloop) and managed to flash back to stock.
Now this is where I think I have the problem; I have CWM installed, and every time I try to flash the OTA it fails and reboots the phone, yes I have installed the HBoot update before trying to flash in case you are wondering.
I downloaded the RUU today and spun up a windows VM (I am on Mac) which would allow me to adb/fastboot but failed to start anything saying there is no USB device connected. So I tried something else;
I then copied the .zip from the RUU doing the %temp% trick in windows, and copied it to the SD and then ran CWM and tried to install - failed again.
I then tried something else; fastboot flash the zip - fastboot flash zip rom.zip which failed (in Windows) and on my mac I get this error;
sending 'zip' (653640 KB)... ERROR: usb_write failed with status e00002be
FAILED (data transfer failure (No such file or directory))
Im running out of ideas! Please help!
:crying:
The official update won't install with clockwork recovery
Sent from my HTC One X using xda premium
JB
danton11 said:
The official update won't install with clockwork recovery
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Thanks for your response, confirmed my suspicion, so as I cant seem to get my windows VM to install the RUU, what would be the best way to remove clockwork?
relock your bootloader in fastboot with this command:
fastboot oem lock
Now run the ruu!
But more importand. You should read everything related to flashing modding of the HTC One X and also the Forum Rules.
nitrous² said:
relock your bootloader in fastboot with this command:
fastboot oem lock
Now run the ruu!
But more importand. You should read everything related to flashing modding of the HTC One X and also the Forum Rules.
Click to expand...
Click to collapse
Thanks but I already tried that.
ExiLeDSoRcEreR said:
Thanks but I already tried that.
Click to expand...
Click to collapse
i had the same problem,if you made a nand back up of your stock rom and thats what you are running now-you need to flash the stock recovery there is a link somewhere by clyde.
thats what was stopping me,flashed the stock recovery with the onex all in one tool,re locked boot,flashed the two apk's to force the ota.downloaded and it installed.
you can also do this by adb or download the jb ruu for your device,i was also on 001 cid
markb63 said:
i had the same problem,if you made a nand back up of your stock rom and thats what you are running now-you need to flash the stock recovery there is a link somewhere by clyde.
thats what was stopping me,flashed the stock recovery with the onex all in one tool,re locked boot,flashed the two apk's to force the ota.downloaded and it installed.
you can also do this by adb or download the jb ruu for your device,i was also on 001 cid
Click to expand...
Click to collapse
Ta mate! will give that a try when I get out the office and let you know.
Okay, so i was just scrolling through my apps, then my phone randomly restarts, and wont go past the HTC Beats screen, and when it does, the screen is just black.
So i restart into bootloader, and it says "Locked" at the top, so it appears its relocked itself?
WHAT DO I DO? WAS rooted and running Revolution HD-9.8 ROM.
Thanks
Edit: Tried unlocking the bootloader again, no result, got error message "FAILED (status read failed (Too many links))
finished. total time: 6.219s"
Edit: Battery is 3970mv, and i cannot get into recovery (i flash RUU HELP PLEASE.)
my friend Mr Hofs said to me your bootloader may unlock and only show locked !
i try to install CWM recovery !
C:\adb-Fastboot>fastboot flash recovery CWM.img
sending 'recovery' (5742 KB)...
OKAY [ 0.754s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 0.960s
i run CMD in ADMINISTRATOR
hey when i flash RUU phone reboot and go to bootloader and i try to reboot (not anything happend only after 3sec show HTC logo and go to bootloader (recovery and factory rest like this)
The most important thing you didn't tell is that the RUU flashed successfully, and that the phone didn't boot up. And that your bootloader goes from unlocked to LOCKED instead of relocked as it should......
The failed status error is normal, its confirmed everywhere on xda
Mr Hofs said:
The most important thing you didn't tell is that the RUU flashed successfully, and that the phone didn't boot up. And that your bootloader goes from unlocked to LOCKED instead of relocked as it should......
The failed status error is normal, its confirmed everywhere on xda
Click to expand...
Click to collapse
my phone after (rom crash and ..) unlocked ==> locked
i don't see relocked status in my life !!
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed
now it's running (RUU)
wait........
"Fingers crossed and burning a candle"
and when it ends up successful you plug out the cable before you reboot !
ERORR [159]:IMAGE ERROR
The rom update utility canot update your android phone.
please get the correct rom update utility and try again
now try ICS ruu
And are you sure the fastboot command
Fastboot getvar version-main
Gave the the 2.17.707 number and not the 2.14.707 number ?
View attachment 1672111
Mr Hofs said:
And are you sure the fastboot command
Fastboot getvar version-main
Gave the the 2.17.707 number and not the 2.14.707 number ?
Click to expand...
Click to collapse
sorry ! screen shot in zip file
Seen the picture .. its freakin bizar ! Ruu matches and the bootloader is locked, ruu runs succesfull but the phone does not boot up..... Unlocking the bootloader is succesfull but the bootloader remains locked !
:banghead: i cant seem to understand this !
Is your recovery CWM or stock? If you were running ARHD I suppose you had a custom recovery aswell?
As far as i know RUU won't work until you flash stock recovery.
Hope this helps
basd43 said:
Is your recovery CWM or stock? If you were running ARHD I suppose you had a custom recovery aswell?
As far as i know RUU won't work until you flash stock recovery.
Hope this helps
Click to expand...
Click to collapse
Yes that's an option, but i tested a ruu once with custom recovery,kernel and rom and it worked flawlessly ! The main problem at this moment is that he flashes the .bin code and that the bootloader remain locked ! The commands are correct, but it refuses to unlock ......
Mr Hofs said:
Yes that's an option, but i tested a ruu once with custom recovery,kernel and rom and it worked flawlessly ! The main problem at this moment is that he flashes the .bin code and that the bootloader remain locked ! The commands are correct, but it refuses to unlock ......
Click to expand...
Click to collapse
Did he try to flash a custom rom despite the fact the boorloader says locked? Maybe it just says locked but is actually unlocked? Happend to me once and after rebooting into bootloader after flashing it said unlocked... dont ask why, just happened...
Yes i believe he tried that too, got faile attempt remote not allowed error.....he rebooted the bootloader a couple of times and it said unlocked indeed, maybe that's the solution....keep rebooting the bootloader untill it says unlocked and then start flashing directly
Its giving me a headache ..... Been thinking about this for 2 days already
basd43 said:
Is your recovery CWM or stock? If you were running ARHD I suppose you had a custom recovery aswell?
As far as i know RUU won't work until you flash stock recovery.
Hope this helps
Click to expand...
Click to collapse
You don't need to flash anything to use an ruu. The only thing that you need is a locked bootloader.
As the other user said. It may be reporting status wrongly. If you're going to try the ruu again. I suggest running fastboot OEM lock first just to make sure
Sent from my HTC One X using xda app-developers app
bagofcrap24 said:
You don't need to flash anything to use an ruu. The only thing that you need is a locked bootloader.
As the other user said. It may be reporting status wrongly. If you're going to try the ruu again. I suggest running fastboot OEM lock first just to make sure
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Yes .... But can you tell me why the ruu ended up as successful ? I just dont seem to get that ?
Another thing ! If you bootloader says LOCKED you should also have full warranty !! If nothing else helps its best to go to the htc service center
So I tried to pass a new rom to my hox yesterday (I was allready on custom) and obviously something went wrong (not sure exactly), but the result is that I got a phone that opens and immediately pops the message: "Unfortunatelly, the process com.android.phone has stopped.".
The strange part is that when it opens and I try to connect it to my pc the sd card is locked so I can't do much.
I tried factory reset/wiping cache etc but nothing worked.
So my last option was to return to stock rom. I downloaded the RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed, which I need and I'm trying to extract the rom.zip the way it's shown here but although I downloaded from 2-3 different places the rom.zip is always corrupted so I can't take the files I need.
Does anyone knows how to fix that?? I can't post the information of my phone at the moment cause I'm at work, but I'll do it when I get home if it helps.
Did you flash the boot.img from ROM.zip via fastboot???
The last time i saw that error i had to send my phone to HTC and get it replaced...
vin4yak said:
Did you flash the boot.img from ROM.zip via fastboot???
Click to expand...
Click to collapse
As I said the rom.zip is corrupted and I can't extract anything.
matt95 said:
The last time i saw that error i had to send my phone to HTC and get it replaced...
Click to expand...
Click to collapse
I was hoping for a different solutions cause with custom rom I won't get a replacement...
george343 said:
As I said the rom.zip is corrupted and I can't extract anything.
I was hoping for a different solutions cause with custom rom I won't get a replacement...
Click to expand...
Click to collapse
I meant the boot.img from custom rom.zip... Did you flash the correct one before flashing the custom rom?
About the ruu, the rom.zip file is encrypted... So you can't extract the rom.zip in many RUUs. If you want to run a ruu, you need to lock your Bootloader and then run the ruu from your pc with admin privileges!
-Sent from my IceCold One X!
vin4yak said:
I meant the boot.img from custom rom.zip... Did you flash the correct one before flashing the custom rom?
About the ruu, the rom.zip file is encrypted... So you can't extract the rom.zip in many RUUs. If you want to run a ruu, you need to lock your Bootloader and then run the ruu from your pc with admin privileges!
-Sent from my IceCold One X!
Click to expand...
Click to collapse
Well I didn't flash anything before installing the new rom...I just reseted/wiped everything...that was my mistake I guess??
I can install the ruu from pc with just locking bootloader without flashing anything else?
george343 said:
Well I didn't flash anything before installing the new rom...I just reseted/wiped everything...that was my mistake I guess??
I can install the ruu from pc with just locking bootloader without flashing anything else?
Click to expand...
Click to collapse
Are you sure your flashing the correct ruu for your device? The ruu should match the version main number of your device... Post the result of :
fastboot getvar version-main
Yes, you just need to lock the Bootloader with fastboot oem lock And then run the ruu from pc with admin privileges...
-Sent from my IceCold One X!
vin4yak said:
Are you sure your flashing the correct ruu for your device? The ruu should match the version main number of your device... Post the result of :
fastboot getvar version-main
Yes, you just need to lock the Bootloader with fastboot oem lock And then run the ruu from pc with admin privileges...
-Sent from my IceCold One X!
Click to expand...
Click to collapse
version-main: 3.14.401.31
and the ruu is: ruu_endeavor_u_jb_45_s_htc_europe_3.14.401.31_r_radio_5.1204.162.29_release_302015_signed
just to clarify something..I didn't try to flash the ruu. Mustn't I first flash the boot.img?
george343 said:
version-main: 3.14.401.31
and the ruu is: ruu_endeavor_u_jb_45_s_htc_europe_3.14.401.31_r_radio_5.1204.162.29_release_302015_signed
just to clarify something..I didn't try to flash the ruu. Mustn't I first flash the boot.img?
Click to expand...
Click to collapse
Yes that is the correct ruu for your device... http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/
No need to flash boot.img or anything, it's taken care by the ruu! Just lock the Bootloader and run the ruu with admin privileges!
-Sent from my IceCold One X!
vin4yak said:
Yes that is the correct ruu for your device...
No need to flash boot.img or anything, it's taken care by the ruu! Just lock the Bootloader and run the ruu with admin privileges!
-Sent from my IceCold One X!
Click to expand...
Click to collapse
Ok thanks for all that. Just one last question (just to certify I won't screw anything up)
I run fastboot oem lock and I got the message:
Lock succesfully
FAILED <status read failed<too many links>>
But the phone says relocked...
So now I run RUU with my phone at fastboot-usb?
george343 said:
Ok thanks for all that. Just one last question (just to certify I won't screw anything up)
I run fastboot oem lock and I got the message:
Lock succesfully
FAILED
But the phone says relocked...
So now I run RUU with my phone at fastboot-usb?
Click to expand...
Click to collapse
As long as your bootloader says locked.. Your fine. Yes, Run the ruu with phone in bootloader
-Sent from my IceCold One X!
Thanks a lot...It's working fine now!!
Great!
-Sent from my IceCold One X!