Develop Bugs

[Q] Firmare upgrade encountered an issue - Am i done for?

Yes, i'm a total noob, sorry everyone. I tried to root my T Mobile Galaxy S2 using the Kies/Odin method, and now i'm getting nothing but a screen that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I would happily follow those directions, but now Kies won't recognize my device?!?!? I also can not get back into download mode. I have no idea what to do. Is there anyone out there that can help?

Can you still turn your phone on and use it?
Sent from my SGH-T989 using XDA App

He can not use the phone
Sent from my ADR6400L using Tapatalk

Hey I was wondering if u can help my friend out it seems like u were trying to be nice but here's his story he was trying to root his phone I don't know what method but it dud require Odin and some file called Hercules witch I think is cwm but I don't know were he went wrong but now when he tries to boot up it takes him to a black screen that says in red writing Odin mode..product name sgh t898, custom binary: no , current binary Samsung official and below all that there is a phone and yellow warning symbol with it saying firmware upgrade encounter an issue. Please select recovery in kies and try again
Sent from my ADR6400L using Tapatalk
my ADR6400L using Tapatalk

This is what he gets is anyone willing to help
Sent from my ADR6400L using Tapatalk

All you need to do is flash it using Odin. Grab the stock rom from the general forum of the galaxy s2 and flash it using Odin.
Sent from my SGH-T989 using Tapatalk

Did/does Odin recognize the phone? If it does then go ahead and flash the stock Odin firmware package and that should take care of the problem. Same thing happenend to me and all you need to do is set everything up just like normal, go into DL mode and give Odin a few seconds to find a com port and hit start...just pretend the warning is not there.

I have the same thing ...
I was doing a stock upgrade through Kies, and my computer decided to be dumb and install a windows update and restart the computer... I now see the same thing, i had the stock rom, but it was rooted, and when I try to go back in Odin, it never recognizes the phone... Kies won't recognize the phone, neither will Odin... Am I just returning this phone or what?
EDIT: Nevermind, I only bought it 2 days ago, so I just exchanged the phone

Yes, you can flash from that screen -- I managed to brick my Vibrant that way a number of times, and as long as you get that screen (or the Android digging screen) it's recoverable. KIES should be able to recover it as should Odin -- if it DOESN'T work turn OFF the computer (all the way off) and restart it then try again.
Samsung's USB drivers have a habit of getting confused and causing flash failures both in KIES and Odin.
Be aware that if you're trying to use KIES and the "latest" firmware is a non-wipe firmware (as the updates from T-Mobile are) it will happily load onto the phone something that will bootloop into the stock recovery and refuse to start! If you get hosed like this you probably need to Odin back to the ORIGINAL firmware so you get a "full" flash, then use KIES (or ODIN) again to perform the update.

UntamedDeviance said:
I have the same thing ...
I was doing a stock upgrade through Kies, and my computer decided to be dumb and install a windows update and restart the computer... I now see the same thing, i had the stock rom, but it was rooted, and when I try to go back in Odin, it never recognizes the phone... Kies won't recognize the phone, neither will Odin... Am I just returning this phone or what?
EDIT: Nevermind, I only bought it 2 days ago, so I just exchanged the phone
Click to expand...
Click to collapse
Were you able to exchange your device? And if you did, what did the T-Mobile reps ask you? and what did you tell them? I ran into the very same problem. I tried everything but I'm still stuck on that screen. I don't want T-Mobile to think I purposely did something to make the phone that way.

Hope I'm not too late to help: I had same problem and used odin to fix.
Here's what I did:
Download stock kernel in tar form from the Android devel forum. Start odin, click check box in PDA, click PDA button then select the kernel you just downloaded.
Insert usb into your phone (I left my cord connected to my computer). Start phone in download mode (up+down keys). Once it's started ib DL mode, unplug the usb cord, then after just a few moments plug it in again. If necessary, let it set a few moments until Odin recognizes the device (yellow stripe in id:com to the upper left), now click start in odin.
That fixed my problem. After that I read and reread everything I could get my hands on, but I think I tried flashing a i1900 kernel.....big duh to me, but maybe I'm not that dumb after all!! But, soon after I was able to root, and have flashed several custom ROMs since my little bump in the road.

Mrplennium said:
Were you able to exchange your device? And if you did, what did the T-Mobile reps ask you? and what did you tell them? I ran into the very same problem. I tried everything but I'm still stuck on that screen. I don't want T-Mobile to think I purposely did something to make the phone that way.
Click to expand...
Click to collapse
Yeah, I just walked in, brought my receipt and box, and told them I needed a new phone because mine bricked while doing a stock update...they were happy to do it... every one there knew I had previously rooted it as well...
Sent from my SGH-T989 using xda premium

i used this method to root my phone, you need to use odin and flash a new rom

Mrplennium said:
Were you able to exchange your device? And if you did, what did the T-Mobile reps ask you? and what did you tell them? I ran into the very same problem. I tried everything but I'm still stuck on that screen. I don't want T-Mobile to think I purposely did something to make the phone that way.
Click to expand...
Click to collapse
Took mine to a store, they didn't have any white kits in stock so they told me to call and tell them that it doesn't turn on, got a replacement ordered without having to troubleshoot over the phone.

Had that happen the first day I got the device trying to root up. Accdently pulled usb while updating. All i did was Hold VOL UP + DOWN And Plug usb in and download mode came right back up and started the process all over again.
It was a success as.
M&S

Worked!
Thank you!

Overseas and very stressed!!
i had a problem updating -- same error message "firmware upgrade encountered an issue" -- kies can NOT connect to my device. ODIN will not install ICS.. ODIN will not install GINGERBREAD either...
i have the SGH-T989 (t-mobile GS2)
nothing will update. i can't back out to revert to the gingerbread OS i was running previously...
can anyone help me out?
email direct or respond here... thanks for anyone's help

have the same problem
tried to downgrade from ics to 2.3.6 and odin gived me a fail message,after that nothing works i i connect it to the charger it says firmware upgrade encountered an issue.please select recovery mode in kies and try again.
but kies doesn`t recognize me and odin neither.
i can go to download mode with my jig but like i said odin does not give me the yellow symbol.....
is it bricked???

atilla88 said:
have the same problem
tried to downgrade from ics to 2.3.6 and odin gived me a fail message,after that nothing works i i connect it to the charger it says firmware upgrade encountered an issue.please select recovery mode in kies and try again.
but kies doesn`t recognize me and odin neither.
i can go to download mode with my jig but like i said odin does not give me the yellow symbol.....
is it bricked???
Click to expand...
Click to collapse
we don't have ICS... so I'm not sure if you're in the correct section. is your phone's variant the t-mobile t989 hercules s2?
don't do anything with kies, go to download/odin mode and flash a fresh download of whatever you messed up on... or I would just flash a complete stock ROM.. the ones ending with ".tar.md5".. that should save your phone.

Teo032 said:
we don't have ICS... so I'm not sure if you're in the correct section. is your phone's variant the t-mobile t989 hercules s2?
don't do anything with kies, go to download/odin mode and flash a fresh download of whatever you messed up on... or I would just flash a complete stock ROM.. the ones ending with ".tar.md5".. that should save your phone.
Click to expand...
Click to collapse
i used a ics rom from xda and my phone is a european s2 without branding,i just saw this thread here and posted my problem.
like i said odin didn`t recognizes me so i can`t flash anything...

[Q] Problems with ODIN recognition

So it seems that ODIN can only recognize my phone if the phone is powered on and running but will not recognize it in download mode. I am using the same cables I have used in the past as well as the same computer running Windows 7. Running stock ICS FH13 Unrooted and trying to root but cannot because once I enter download mode, ODIN stops seeing the device. Have tried re installing drivers many times and all USB ports on the computer with different USB cables. Hoping that somebody has a suggestion for getting the phone to be recognized in download mode for me.

ZeusIII said:
So it seems that ODIN can only recognize my phone if the phone is powered on and running but will not recognize it in download mode. I am using the same cables I have used in the past as well as the same computer running Windows 7. Running stock ICS FH13 Unrooted and trying to root but cannot because once I enter download mode, ODIN stops seeing the device. Have tried re installing drivers many times and all USB ports on the computer with different USB cables. Hoping that somebody has a suggestion for getting the phone to be recognized in download mode for me.
Click to expand...
Click to collapse
Is usb debugging checked
Sent from my SPH-D710 using xda premium

Yes debugging is checked.

Some more information. Turns out the phone (originally my friend's) needed to be taken in for service and when he did this he read somewhere about the USB jig to remove the custom binary counter. When he did this he flashed a gingerbread bootloader to use the jig. Only thing is, he didn't ask me for help (I've usually helped him out with this stuff in the past) and I think he flashed an international version of the bootloader. Reason being when I boot the phone it says Samsung Galaxy SII GT-I9100 where it should not have that last part. I remember reading somewhere about this and how it happened to somebody but they had CWM recovery and flashed a special zip. I do not have this option because of the stock recovery and unrooted ROM. Just wondering if there is anything that can be done to reverse this. I can run the phone and use it still but would rather root it and continue the way I have always done with my past phones.

ZeusIII said:
Some more information. Turns out the phone (originally my friend's) needed to be taken in for service and when he did this he read somewhere about the USB jig to remove the custom binary counter. When he did this he flashed a gingerbread bootloader to use the jig. Only thing is, he didn't ask me for help (I've usually helped him out with this stuff in the past) and I think he flashed an international version of the bootloader. Reason being when I boot the phone it says Samsung Galaxy SII GT-I9100 where it should not have that last part. I remember reading somewhere about this and how it happened to somebody but they had CWM recovery and flashed a special zip. I do not have this option because of the stock recovery and unrooted ROM. Just wondering if there is anything that can be done to reverse this. I can run the phone and use it still but would rather root it and continue the way I have always done with my past phones.
Click to expand...
Click to collapse
Does it have the yellow triangle when you see that? My phone shows that when I have the triangle.

No yellow triangle.

Mine has said gti9100 before. Don't remember what I flashed. Think it was a leak through mobile odin. So you may or may not be screwed...
sent from my BAD A$$ Epic touch

Hoping not but this is stock FH13. Did not flash anything and my computer/ODIN does not recognize my phone being plugged in when in download mode... Hoping someone can chime in here about something they would try or something I might have missed. I think I got all the basic troubleshooting stuff out of the way but if anybody can point something out, great!

Do u put your phone in download mode then hit volume up then connect to usb?
Sent from my SPH-D710 using xda premium

Yes, I go from full power off with USB unplugged and press and hold the power and vol down keys until I get the warning screen. I then hit vol up to continue and then plug in my phone to the computer.
With further research seems as though I am hosed. In download mode it lists my device as "product name: GT-i9100" where it should say "product name: SPH-D710" Still hoping someone can save me so I'm not stuck on stock but seems as though this device had a international phone's bootloader flashed onto it.

Yes, I go from full power off with USB unplugged and press and hold the power and vol down keys until I get the warning screen. I then hit vol up to continue and then plug in my phone to the computer.<br />
<br />
With further research seems as though I am hosed. In download mode it lists my device as "product name: GT-i9100" where it should say "product name: SPH-D710" Still hoping someone can save me so I'm not stuck on stock but seems as though this device had a international phone's bootloader flashed onto it.
Click to expand...
Click to collapse
Thats the problem i couldnt help u there but u can try installing the drivers u need
Sent from my SPH-D710 using xda premium

You could get Mobile Odin and flash using that. There's a lite option that will let you flash Agat's kernel and then you can go from there.

Galaxy t989 alive but with the screen off

good afternoon, is that I have a Galaxy SII for T-Mobile and the phone is dead, no lights or anything, I connect it to the computer and I get that I have to install the drivers, I find and install it and now odin recognizes it but SetupConnection stands on, not to get it back, not go into recovery or anything, the Kies does not recognize, first of all, I have the fully closed kies, I have a laptop and I tried it on both ports I have with two wires different usb.

k.oz said:
good afternoon, is that I have a Galaxy SII for T-Mobile and the phone is dead, no lights or anything, I connect it to the computer and I get that I have to install the drivers, I find and install it and now odin recognizes it but SetupConnection stands on, not to get it back, not go into recovery or anything, the Kies does not recognize, first of all, I have the fully closed kies, I have a laptop and I tried it on both ports I have with two wires different usb.
Click to expand...
Click to collapse
Did you flash anything? What was the last thing you did before it went dead? You might have soft bricked your phone. Can you get into download mod?

Not, odin recognize it but just stop in setupConnection, I install hqusb drivers for qualcomm and nothing, I used other odin and nothing again, I have brixfix software but I do not anything because I will use this tool like as my last option, I do not know how this tool works......
Sent from my GT-I9100 using xda app-developers app

Can you get into download mode? hold volume up and down then plus in the USB cord? So screen doesnt turn? And it just happened outta nowhere?

Not sure if you still need help, but go into your task manager and disable Kies.

Towle said:
Not sure if you still need help, but go into your task manager and disable Kies.
Click to expand...
Click to collapse
I already did, but whatever is just, without connecting

help plzzzz

k.oz said:
Not, odin recognize it but just stop in setupConnection, I install hqusb drivers for qualcomm and nothing, I used other odin and nothing again, I have brixfix software but I do not anything because I will use this tool like as my last option, I do not know how this tool works......
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
What u said about the "hqusb Qualcomm drivers" i believe your hard bricked correct me if in wrong
Sent from my SAMSUNG-SGH-T989 using xda premium

SAMSUNG epic 4g stuck on boot screen after trying to restore Stock Rom

I was running CM10 but I got a message whenever I got into the Camera App that said "Unfortunately, Gallery has stopped working", after a research in here I found that I wouldn't get that msg again if I installed this "gapps-jb-picasa-20121011-signed" thing.
I did, but when I got into my Camera App, I didn't have the other options like "Image Effects" and all that stuff.
So, what I did was to Restore my phone from my BackUp folder that I've created before installing CM10, but for my surprise I got a msg saying "VolumeError" or something like that and other things that I can't really remember... and as a good Mexican that I am, I ignored it and hit the Reboot System Now..
What happened next almost made me cry...
I was expecting to get in my stock rom without any problems and yadda yadda but... OH SURPRISE!
I got stuck on the boot screen, where it says "Samsung" and the website of it and I didn't freak out... I waited like 5-6 mins and took the battery out. When I turned again, I tried to get in Recovery Mode but the screen just kept turning off and on and saying the exact same thing, the "Samsung" logo and it's website.
I hope you can help me and please answer me. I don't know if I'm 1000000% screwed but I will only wait for the worst. Sorry for my bad english and don't hate me for being mexican
I don't know if I can get into my phone from my PC but whenever I plug my phone in, it just loads it as if it was in Charging Mode
PLEASE HELP ME!
I BEG YOU!

Flash again CM10 with wipe data, cache, dalvik
If still stuck
Odin to stock ROM, you can search on google to odin the epic
Sent from my JellyBeer v.4.14 epicmtd (b3)

Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator

Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21

AndyYan said:
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
Click to expand...
Click to collapse
Thanks to Everyone!
I solved this like 2 hrs after all this happened.
I got it by Odin. I couldn't go into Recovery Mode, but I got in Download Mode and do it by Odin.
Sorry, I'm a n00b to all this.
Greetings from México and thanks for all your support.

Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?

To the OP:
I would follow the instructions in this video from the part where qbking77 talks about putting the phone in download mode, as you presumably did when you first rooted your phone. Download all the files linked/referenced on the site, especially the Samsung mobile drivers, Odinv3 1.87, CWMRecovery, and the deOxed versions of the stock ROM. In sum:
1) get into recovery mode by holding onto the volume down, camera buttons, and then without letting either of those go, press and hold the power button.
if you get into recovery mode, skip to step 4
2) while your phone is completely off, hold onto the "1" button on the slide out keyboard first, then without letting the 1 button go, press and hold the power button until you're in download mode.
3) flash the version of Clockworkmod
4) once in recovery mode, wipe your phone, clear the cache, and dalvik cache, and then flash the deOxed version of the stock ROM
niteNarmor said:
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
Click to expand...
Click to collapse
Do you have the mobile drivers installed on the computer you're trying to connect your phone to?

Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".

niteNarmor said:
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
Click to expand...
Click to collapse
Uninstall and reinstall drivers.
Sent from my SPH-D700 using Tapatalk 2

Have already done that. But just for laughs, I did do it again with no change.

can you get your D700 into download mode as described above?

Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.

niteNarmor said:
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
Click to expand...
Click to collapse
Try to install another version of Odin or getting Odin from a different server.
My phone is fully recovered and now I'm only SuperUser 'cause I don't want any CM by now.
Greetings from Mexico!

I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
EDIT: I have now downloaded and tried 4 different Odin programs with no avail. Again, that makes 6 Odin programs, 6 different USB ports, 3 different cables with the same exact results. The computer recognizes device but Odin will not.

niteNarmor said:
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
Click to expand...
Click to collapse
Had a simular issue when I had two odins on the same computer, for a lark and as I had nothing better to do, tried installing drivers and one version of odin to a vertual machine running vista and checked to see if my computer's vertual machine would reconize and it did, I took it as a sine that at one point I had done something to my computer's main os sometime between rooting my epic 4g and frying it (recovering from a backup from a different parition layout I think, bad times with bootloops and seeing way to much of the samsung logo.) So as I'm not brave enough to run odin on vm I instead removed all of odin from my main os and all of the samsung drivers, then reinstalled rebooted and repluged my epic in, got reconition and reflashed with plesure.
The other issue might be that your computer is reconizing the device and try/failing/hanging and not allowing odin in. Had an issue when my computer was failing to pop up a 'what do I do with this' window and hanging round in the system. A reboot with the internet unpluged strangely solved that for some reason, might be the reboot might be the combo, but I find better connection reconition with my computer when I've fewer things connected.
Don't mind the spelling to much I clean up with my other device.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app

One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2

jeffreyjicha said:
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Phone does not boot past the "Samsung - www.samsung.com" logo. Plus, as with all of my devices, USB debugging is always checked.
Thanks for the suggestion though. Always helps to double check things.
I believe I am going to take it to Sprint tomorrow.
If I can't get into it, they should not be able to get into to it either. If they can't get into it, HELLO WARRANTY....

Perhaps before doing the whole getting found out thing with the return center, perhaps they do know what they're doing, try rolling this link past your eyes?
http://forum.xda-developers.com/showthread.php?t=773032
I know I've been in your boot problem situation and recovered, it just took persistence and eyenumbing amounts of reading.
Note On the multiple Odin, USB, and driver installation: if you've access to another computer it could be worth wile to run once though on a previously virgin computer, meaning your phone and computers' USB's have never touched. Just do the installation, rebooting, and plugging in exasperatingly meticulous order.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"

Yep tried the "virgin computer" computer as well. The computer sees the device but Odin does not. Com light will not illuminate.

Sounds grim.
So to rap up all the cables, plugs, computer, and software with odin is out of the debug process.
So I did some digging into the past and if your computer is reconizing and odin is not then ADB (android debug bridge) and the sdk are the other option
http://forums.androidcentral.com/epic-4g-rooting-roms-hacks/33427-how-access-your-adb-shell.html
Ran across this and it might just be what you need. Its not quick but it has worked for me in the past.
The other thing that may work is ejecting the sd card and battery before doing anything. Though its likely something you've already tried.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"

[Q] [Help!] Bricked Phone with driver problem

Hello everyone...
I was updating the phone recently, and went to reboot it (cyanogen mod ROM btw) and now I have no idea what it did but it is now stuck on the Samsung logo, and their is no recovery I can use on it. Only DL mode works.
I tried to use Odin to relfash but the problem is on both my Windows 7 and Windows 8 computers, they install the drivers, but they still fail to recognize the phone when I plug it in!
I have tried different USB ports, a full driver uninstall, multiple USB cords and the computer refuses to recognize the phone saying "USB Device not recognized"
Again, the drivers install fine, and I did a reboot after each install and uninstall. No luck.

I didnt even install drivers on my W8 netbook and I was able to flash back TWRP using Odin and Download mode yesterday when my attempt at flashing TWRP 2.6.0.4 originally failed.
Fire up download mode, then open up Odin (you should see a COM port open), load up what you need to install, then flash.
What are you trying to flash using ODIN? A bootloader or a ROM?

"BootLooping GhostBrick"
Holy crap! you too? I'm experiencing the same thing too bro. its my girlfriend's phone tho. she's borrowing my Nexus 4 while I work on fixing her SGS2...I seem to have contracted a serious case of the BootLooping GhostBrick, just like you did, right after updating. I went through the same steps troubleshooting as you did, and ...its a guess, but I'm starting to figure the solution will probably include: 1. using ADB to push sum files to the phone, or otherwise somehow reflashing stock firmware from the PC.
2. Re-Root the dam thing and flash a kernel with a recovery (like CWM or TWRP) using rom manager...and 3. Considering installing a ROM of my choice Like PACMAN, or Cyanogenmod.....hmm...Yum
anyway, the search for the vaccine to this dreadful affliction begins. Please post if you find something, I will too.
---------- Post added at 10:21 AM ---------- Previous post was at 10:13 AM ----------
nagoshi said:
I didnt even install drivers on my W8 netbook and I was able to flash back TWRP using Odin and Download mode yesterday when my attempt at flashing TWRP 2.6.0.4 originally failed.
Fire up download mode, then open up Odin (you should see a COM port open), load up what you need to install, then flash.
What are you trying to flash using ODIN? A bootloader or a ROM?
Click to expand...
Click to collapse
...true, I second that. I'm doing this as we speak.

No Go Mi Amigo... PC still No read
vdorvilus said:
Holy crap! you too? I'm experiencing the same thing too bro. its my girlfriend's phone tho. she's borrowing my Nexus 4 while I work on fixing her SGS2...I seem to have contracted a serious case of the BootLooping GhostBrick, just like you did, right after updating. I went through the same steps troubleshooting as you did, and ...its a guess, but I'm starting to figure the solution will probably include: 1. using ADB to push sum files to the phone, or otherwise somehow reflashing stock firmware from the PC.
2. Re-Root the dam thing and flash a kernel with a recovery (like CWM or TWRP) using rom manager...and 3. Considering installing a ROM of my choice Like PACMAN, or Cyanogenmod.....hmm...Yum
anyway, the search for the vaccine to this dreadful affliction begins. Please post if you find something, I will too.
---------- Post added at 10:21 AM ---------- Previous post was at 10:13 AM ----------
...true, I second that. I'm doing this as we speak.
Click to expand...
Click to collapse
.....well, so much for that attempt.... still cant get either the PC or Odin to Read....I just flashed CWM recovery using ODIN minutes ago with no problems, but now its borked too

vdorvilus said:
.....well, so much for that attempt.... still cant get either the PC or Odin to Read....I just flashed CWM recovery using ODIN minutes ago with no problems, but now its borked too
Click to expand...
Click to collapse
Reinstall Odin and the drivers for t989, then go get twrp 2.6.0.4 from techerrata.com/browse/twrp2/hercules then open Odin and put the phone in DL mode, now when odin connects make sure u open the recovery in PDA format and touch nothing else in Odin, flash twrp and ur good, this version is capable of dealing with 4.3 too with no issues at all
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Same issue
soupysoup said:
Reinstall Odin and the drivers for t989, then go get twrp 2.6.0.4 from then open Odin and put the phone in DL mode, now when odin connects make sure u open the recovery in PDA format and touch nothing else in Odin, flash twrp and ur good, this version is capable of dealing with 4.3 too with no issues at all
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Re-installing Odin and drivers still didn't get Odin to recognize the device in download mode. Windows 7 isn't assigning it any COM port, and nothing can be flashed unless Odin sees the com port the device is on. I used Goo Manager to flash TWRP 2.6.0.3 over my previous 2.6.0.0 version and now I'm stuck on samsung logo, can't reboot to recovery and PC won't recognize device in download mode. Anyone know a solution?

VermontKindBud said:
Re-installing Odin and drivers still didn't get Odin to recognize the device in download mode. Windows 7 isn't assigning it any COM port, and nothing can be flashed unless Odin sees the com port the device is on. I used Goo Manager to flash TWRP 2.6.0.3 over my previous 2.6.0.0 version and now I'm stuck on samsung logo, can't reboot to recovery and PC won't recognize device in download mode. Anyone know a solution?
Click to expand...
Click to collapse
Welcome to ur first soft brick, and as I said in ur other post u need to disable or removes Samsung kies before trying to use Odin as long as any part of kies is running even in background Odin won't see the device, also make sure u use factory/data approved USB wires, also try diff ports, sometimes Odin won't see com3 but will see com5, be patient and follow this and ull be fine, also twrp2.6.0.3 has been known to cause sftbricks, DL 2.6.0.4 from techerrata.com/browse/twrp2/hercules its the newest and 4.3 compatible
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Yup
soupysoup said:
Welcome to ur first soft brick, and as I said in ur other post u need to disable or removes Samsung kies before trying to use Odin as long as any part of kies is running even in background Odin won't see the device, also make sure u use factory/data approved USB wires, also try diff ports, sometimes Odin won't see com3 but will see com5, be patient and follow this and ull be fine, also twrp2.6.0.3 has been known to cause sftbricks, DL 2.6.0.4 from its the newest and 4.3 compatible
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?

VermontKindBud said:
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?
Click to expand...
Click to collapse
Yes u need to make sure kies isn't running or installed on ur PC, if it is Odin won't see it
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Unrecognized by PC
VermontKindBud said:
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?
Click to expand...
Click to collapse
It's not a matter of trying different com ports, I can't get the PC or Odin to recognize the phone in download mode despite uninstalling kies, installing the latest drivers twice, 3 different OEM cables, multiple usb ports, nothing. when I plug it in, Windows doesn't make any sound like with other usb devices, nor does it try and search for drivers. Are there any other options short of JTAG repair?

VermontKindBud said:
It's not a matter of trying different com ports, I can't get the PC or Odin to recognize the phone in download mode despite uninstalling kies, installing the latest drivers twice, 3 different OEM cables, multiple usb ports, nothing. when I plug it in, Windows doesn't make any sound like with other usb devices, nor does it try and search for drivers. Are there any other options short of JTAG repair?
Click to expand...
Click to collapse
I was going to reply earlier, but I got side tracked and this guy is literally having the exact same problem as me. I tried multiple OEM cables, and ports and Windows recognized it but it still won't let me USE it. Odin (after re-install) still shows no connections or ports.
Also, yeah this phone isn't mine either, my Dads. He is using my old S3 for now and is quite mad with me hahaha.
So yeah, I have to re-cap...
-Updated through Goomanager.... (the culprit I am guessing)
-Rebooted
-Got stuck on the Galaxy S 2 screen
-Plugged in with 4 USB cables to three different USB ports
-Uninstalled and reinstalled Odin numerous times, each with a reboot between.
-Odin fails to recognize it
-Windows KNOWS IT IS THERE, and makes a sound when plugged in, however it says "USB Device not recognized"
Any more ideas?
Thanks for the help to guys it is very much appreciated. I will donate to the person that can help me out of this

Here is a screen shot of Windows with the phone in DL mode

LGIQEXPO said:
Here is a screen shot of Windows with the phone in DL mode
Click to expand...
Click to collapse
Do u have Samsung kies installed on the PC? If u do your going to need to remove all traces of it in order for Odin to see the phone, also search Samsung t989 USB drivers and install the specific driver for Hercules, if u can get the phone into DL mode its fixavke so don't stress to much, I use Odin v1.85, download twrp2.6.0.4 from this site techerrata.com/browse/twrp2/herculesif Odin still fails to recognize the device try diff PC, factory/data approved USB wire, an make sure kies is nowhere and it should work, pm me if u need more help I'll do what I can, but like I said as long as DL mode is accessible its only a soft brick...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

soupysoup said:
Do u have Samsung kies installed on the PC? If u do your going to need to remove all traces of it in order for Odin to see the phone, also search Samsung t989 USB drivers and install the specific driver for Hercules, if u can get the phone into DL mode its fixavke so don't stress to much, I use Odin v1.85, download twrp2.6.0.4 from this site techerrata.com/browse/twrp2/herculesif Odin still fails to recognize the device try diff PC, factory/data approved USB wire, an make sure kies is nowhere and it should work, pm me if u need more help I'll do what I can, but like I said as long as DL mode is accessible its only a soft brick...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Kies is no where in sight. I will try yet another PC as well as searching for Hercules specific drivers (any link?) When I get home. Thank you in the mean time

LGIQEXPO said:
Kies is no where in sight. I will try yet another PC as well as searching for Hercules specific drivers (any link?) When I get home. Thank you in the mean time
Click to expand...
Click to collapse
Just Google Samsung t989 Hercules USB drivers, download and install, it should work, like I said as long as DL mode is accessible it should be an easy fix...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Omg....

I am experiencing the same problem. Did anyone find the solution?

Probably a faulty USB port. My computer shows that message all the time, only one of them works correctly. If not, you just need to install the correct USB Drivers, because even if you don't have them it should recognize your phone as a Samsung phone but will say that the drivers did not install correctly.