[SOLVED] "SAFE MODE" overlay bottom left, HELP ! - Desire Q&A, Help & Troubleshooting

Hi guys,
I've been on xda for a long time and done all things on my trusty old desire, but recently, during a rainy day, i tried to listen to a call, and maybe some water got in..... I went turned off, went home, dried the phone for a couple of hours,
Now when i turned it on, there is a message overlay on bottom left of screen, :SAFE MODE:
SAFE mode disables your DATA partition and no other obvious side effects (but its a big problem itself)
I've googled i around and some say its hardware fault, some say they fixed it with some keypress combos.... i tried em all, no luck yet..... keys do work in rom, except the Vol down, trackpad, and power key(it reboots instead locking).
I tried several gb, ics roms, downgraded hboot, then upgraded, many wipes, many reboots...no luck as of now..... Any helpful suggessions are welcome. I love my desire very much and plan to use it (if repaired) for a year atleast....
If there is a workaround, tell me ill try it for sure. My phone out of warranty so i am also willing to open it up myself and in that respect, any guide or tutorial is also welcome. Please guys just anything, even for the sake of it. (i know i sound desperate, coz i really am. Being a student, u cant replace smartphones very easily)
Regards
A broken Desire owner:crying::crying::crying:

It seems your Vol down and trackpad are stuck, so they keep being pressed. Might be a contact problem, but might also be on the mainboard.

ok guys
Lets see,
I opened up my desire using a disassembly video, (pretty hard job finding right screw drivers).....
Now vol down, vol up working..... power key is acting normal (not rebooting the phone on key press),
Search, menu, home, back, all are working perfect......
Optical J-pad NOT working, not pressing, not moving,
And phone still in safe mode....
Now any tips !!!!
Regards
Yasir

Usually you'd go to safe mode when pressing the menu button while booting, but it may be the same with the trackpad (can't test that atm). You say menu button works fine? Try pressing Vol- and Power and see if it reboots, then your trackpad is still stuck (and you can probably fix it like you fixed the volume buttons).

thanks for reply
hi,
OK guys i have some update....
Desire can be put in safe mode by using MENU + POWER key combo, thats the normal process. BUT, if there is water stuck in ANY of the keys, may it be vol up/down, menu, home, optical joypad etc, the DESIRE will detect a Fault in hardware, and go in SAFE MODE ALWAYS, no matter whether u press a combo or not....
IN MY CASE, the optical joypad had the shortcircuit...... i opened my phone myself using a disassembly video, and cud clearly see the burn out wire in optical joypad. So i removed the optical joypad button cable from its connector.
For the rest of the keys, i JUST performed cleaning with cotton cloth, and packed the phone up.
Voila !!!! The phone booted up JUST FINE......
so for all you guys out there, if you encounter this, you know what to do.....
I'll attach the picture of removed OJ later.
Regards
Yasir

Related

HELP!!! My MDA3's Power Button is COMPLETELY INOPERATIVE!!!!

Hi,
My MDA3's power button (on/off) stopped working!! Pressing the button does NOTHING!!! I had locked all keys except the power button, since the power button stopped working, the ONLY way i could turn device on was resetting it!!!!
I have tried upgrading ROM etc, but the power button still wont work!
Can anyone please help me with this?
How did you enter bootloader to flash the rom, is the power button not needed on the mda3 to enter bootloader.?
....
interestingly enough i was able to reset the device by just using the reset pinhole, even the hard reset they say by using recorder+power+reset i was able to do with out the power.
It sounds like you have a hardware problem rather than software, I'd send it back & get it swapped before the warranty runs out if I were you.
We've had four units fail with dodgy buttons, you might even find that it's one the other buttons that is stuck in the pressed position thereby preventing use of the power button (try the sound recorder/camera buttons).
..
I was able to fix this problem by opening the phone, cleaning it with compressed air and putting it back together. I suspect this fixed the stuck button somehow.
I had simmilar problem. There must have been garbage in the button, as I noticed that it did not have the same 'click' feel to it when it stopped working. Luckily my phone was still under warranty, and I swapped it out (ugh)

Can't power off... volume goes down by itself...

Guys, need help... can't figure out if it is a soft or a hard problem...
Have had SX66 for 3 years. Almost never a problem (except for occasional thing when people could not hear me, I could hear them, but after soft reset that thing usually corrected itself).
However, just recently got a real problem.
- Can't power it off. Power buttom only works on powering on, but not on powering off.
- At the same time, the volume window pops up (with two volume sliders, "on", "vibrate", and "off), and the left slider automatically slides down on its own, preventing me from accessing anything else. When I try to do something else, go to Programs, or else, this freaking Volume window keeps popping up, and left slider keeps going down and stays down there.
When I try to increase volume, it keeps going down right after I raise it. And the volume window is almost constantly popped up.
From time to time, it disappears, allowing me to do something for several seconds or even minutes, but then pops up again.
Yesterday, I even managed to do something for several minutes without it, and even managed to turn SX66 off, although I had to press the button for a second longer than usual to turn it off. Today, no luck, can't power it off. If I press it for a bit longer, it just goes in "dimmed" screen mode, but stays powered on.
Any advice?
Thanks.
I guess, I'll have to try to clean the power button and volume slider on the side. Looking for good disassembly instructions. Found one, but more would be appreciated...
http://pdasmart.zftp.com/instructions/sx66_09.pdf
pecq said:
I guess, I'll have to try to clean the power button and volume slider on the side. Looking for good disassembly instructions. Found one, but more would be appreciated...
http://pdasmart.zftp.com/instructions/sx66_09.pdf
Click to expand...
Click to collapse
Check the wiki, there are disassembly instructions in there.
Did you solved your problem ? I have hte same only my volume go up ...
i need help
hi everyone...i need help ...coz my qtek 9090 windows 2003 is stucked when i was upgrading it ..now it shows only written serial v2.06 or usb v2.06...and screen back light is off,i tried many things...bt i failed now pls somone help me....soon ..
maybe the problem is not in button but in varistors because they can do this...
pecq said:
- Can't power it off. Power buttom only works on powering on, but not on powering off.
Click to expand...
Click to collapse
I have the same problem. I was starting to think that there is no way to turn of BA . Any help?
I have the same problem, only that mine is a HTC touch dual (niki).
the volume screen keeps popping up, and does a "volume down" command... sometimes it goes away, sometimes it comes back...
:S
Ive got a similar problem ive upgraded my BA to wm 6.1 (Xplod) the problem that i am having is that i cant seem to power it off..only way that im able to do that is by removing the battery..when i keep the power button pressed only the backlight turns off but no the phone..How to i power it off?
and secondly ive a problem with the keyboard..while writing some times i press a key and it keeps typing that for example i write s it keeps writing ssssss or giving spaces untill i press something else...is this a software issue or a hardware issue..cant seem to figure it out
I know this thread has been a while but if anyone has the same problem, you'd probably be interested about what i did.
well i had the same problem of the volume going down by itself and the volume icon pops which basically lets you do nothing.
tried all the approaches thinking it was a software issue. but i finally went nuts and took my torx screwdriver, opened the blue angel and tore off the part in the motherboard where the outer volume lever is attached to.
It worked.
So if you could with the fact you wont a direct volume adjustment at the side, you could probably try it

Volume up, Menu and Home key not working!

Hello everybody! My htc desire's physical buttons(actually just the volume up, home and menu keys) don't work...I press them but nothing happens. Well, they work sometimes, but when they don't I reboot my phone, randomly press some buttons, and they start working again. I just don't know what the fault is. Im on MildWild CM 4.3. I think the same problem was with other firmwares too. Can you please solve my problem?
If your device is under warrantly just send it to htc. It's a hardware problem, not something that you can solve with a script.
Ah, so you're telling me there's nothing that can be done to repair it? Cuz, my device isn't in warranty(I just replaced the casing)...
thedarkcoder said:
Ah, so you're telling me there's nothing that can be done to repair it? Cuz, my device isn't in warranty(I just replaced the casing)...
Click to expand...
Click to collapse
I don't know.. I don't want to be pessimistic, maybe you can search for similar problem in internet and a possibile solution, not just for Desire but in general for devices that have hardkeys. Maybe like use a spray for electric contacts while device is turn off and wait that it's completly dry before turn it on. Good luck.
I can't remember it, but I think that this problem appeared only after I got my casing changed. Could the technician have done something wrong? Can I send it to the man that changed the casing?
It's probably just some dust that gathered underneath the buttons. I had the same problem with the volume down button. I used a needle to clean the dust around it, and then it worked perfectly.
I dont think it could be due to the dust, cuz there are three buttons which simultaneously stop and start working... It's a bit strange tho..
I have issues now with my power button. It's unreliable... that is, the button sometimes works. Sometimes when I press it, it opens the shutdown menu..
Started all of a sudden. Not sure how that happened... and it's out of warrenty for 4 months now..
That is why I use Button Savior
Same!
I am getting the same problem. I have replaced the keypad flex with a new one and still getting the same issue. It would start working randomly like if I open the browser and open many tabs, then it would work. Funny thing is that they would not even work when I go in recovery.
My desire is 2yrs old now but I still love it.
shricker said:
I am getting the same problem. I have replaced the keypad flex with a new one and still getting the same issue. It would start working randomly like if I open the browser and open many tabs, then it would work. Funny thing is that they would not even work when I go in recovery.
My desire is 2yrs old now but I still love it.
Click to expand...
Click to collapse
Same problem here.
Mostly happens with Home and menĂ¹. Less often with volume buttons.
For now I'm using the "button saviour app" workaround, but if is something hardware I will know it very soon... (made a copy of my rom on a friend's HTC Desire)
thedarkcoder said:
I can't remember it, but I think that this problem appeared only after I got my casing changed. Could the technician have done something wrong? Can I send it to the man that changed the casing?
Click to expand...
Click to collapse
thedarkcoder said:
I dont think it could be due to the dust, cuz there are three buttons which simultaneously stop and start working... It's a bit strange tho..
Click to expand...
Click to collapse
All three buttons simultaneously! Buttons usually fail gradually one by one and drive you mad finally. I would put my money on the keypads being misaligned during whatever you got done with casing. Take it back to him.
If its some kind of misalignment no amount of sprays will help.
BTW I use zmooth for button conservation
use soft key instead
Sent from my HTC Desire using xda premium
I had the same issues : menu button working randomly, had to press very strong on up/down volume buttons.
I've dismounted my phone (using this : http://www.formymobile.co.uk/desiredisassembly.php ), and I saw that there were a lot of dust, hairs.. I tried to clean up/down volume buttons the best way I could, and they both work so much better now! Not totally perfect though.
By the way, I noticed that there was a lot of compressed dust in micro-USB connector and was able to remove it fully (thing I couldn't do without dismounting phone).
I didn't want to go farther to access menu/home buttons because I didn't have time and Menu button works quite OK.
I have the same issue here with the volume buttons they tend to get unresponsive and unreliable.
Even though all the parts were renewed since six months ago, the volume buttons are probably bad designed?
Holland1994D said:
I have the same issue here with the volume buttons they tend to get unresponsive and unreliable.
Even though all the parts were renewed since six months ago, the volume buttons are probably bad designed?
Click to expand...
Click to collapse
You could replace bad working buttons' functions with others'. My volume down isn't working, so I made my search button act like a vol down.
Buy the new one
Sent from my GT-N7000 using xda premium

Problem with power and volume down buttons

Hi everybody,
I have sometimes a strange problem :
- the volume down button doesn't work anymore.
- I can't use the power button to turn on / off my phone, but it works as I can press it 3 times to open camera. On the contrary, I can't use it to ask for reboot, but it works for soft reset! Aaaaaarrgh! Brain pain!
When I try to soft reset, my phone enters in safety mode, as if I pressed the volume down button during restart.
In bootloader, I can't use power and volume down button. Quite annoying.
Sometimes, volume is turning down without pressing any button.
But what is weird is that my phone shifts from normal state (all buttons working) to defect state and back to normal state again without doing anything. It's unpredictable. It can work well for decades, then stops working fine for hours or days then back to normal.
Sometimes, when it works well, when I'm using it, it goes wrong without doing anything. I'm reading my favorite site and volume is suddenly going down. Without warning, without even touching a button.
I have to say one more thing. I picked up that phone from a coworker, and the volume button is a bit bent near volume up (picture needed?) but it worked fine for months before starting to mess.
I hope you'll be able to help me.
Sorry for my English, it's not my native tongue.
Seems to me like a hardware problem.
What I'd do honestly is to hit it repeatedly on a hard surface, but please, do not do that
If you can I suggest taking it apart and making sure all the ribbons are firmly set in place and undamaged. It can be an one way ticket for damaging the phone for good though, so wait for other suggestions too.
Thanks for your answer.
What is making me angry is that it also does this when left alone on the table : I let it there working perfectly and when I pick it up again, it fails.
And when it fails, once again I let it alone and suddenly the volume goes down, without even touching it. Raging.
its a hardware problem, u have to change the volumes and power flex, had the same problem with the powern button, i turn the phone off, and a few secons later it power on by himself till i change the flex
Did you take the phone apart recently? I had my battery replaced and that's when my Volume up started phantom pressing. I hit the phone repeatedly on a flat service and made sure to kind of slap it so it would impact kinda evenly as to not dent the case, it worked for about a week at a time, then I just took the phone apart and tried to align everything and made sure all the insulation tape was flat and and not bunched up and now it's fine. We'll except my USB port has got some giggle to it. Order a new USB of amazon for like $9, I'm trying to hold out for a LG V30

Broken power button workaround to turn on.

So I have a OnePlus 3 since it was released and my power button started not working properly about a year ago.
And today I found out that the power button was not working at all anymore no matter how hard I pressed.
At first it was clicking twice instead of once (shortcut to open the camera), or I had to press it very hard to make it work.
I found some workarounds (double tap to wake, double tap to lock, etc).
So when the device is powered on, it's fine I can do everything I need.
The problem is when I need to poweroff the device (changing sim card) or when it runs out of battery.
On some other threads people say to hold the volume down button and to plug the phone to a computer.
But it doesn't work for me, when I do that the device goes to the bootlogo (before the romlogo) and is stuck there.
Any help or idea appreciated.
Also I am not willing to change the power button because it seems hard to take apart the device according to this tutorial : https://fr.ifixit.com/Tutoriel/OnePlus+3+Power+and+Volume+Button+Assembly+Replacement/76019
I am on Lineage16 if that can help.
I feel you. I have broken power button since august... Found workarouns like you. But for me, power button starts to work after one or two weeks so i think it is software issue. But about replacing power button you are really wrong. OnePlus 3 is one of the easiest phones to repair. The thing is, you dont need heat gun to warm adheasive... You just take out screws and pop out the screen. This is kinda one of the reason why i took my phone so i can change battery with no problems or do any other repair by myself. But in the past 3 year i did not need to take apart my phone ?*. You can look up jerryrigeverything he tears down oneplus3 and shows everything step by step. Its indeed really easy, compared to other phones.
Plz answer this then I have replaced power and volume ribbon cable twice with new ones and my power button still not working volume is fine though and I want to unlock bootloader but without power button I can not select the option to do so?

Categories

Resources