Develop Bugs

[Solved] Odin stuck at "mibib download"

Edit: Using another computer fixed it, mod please close the thread
Hello, i was going to flash another baseband today so i did the usual, started odin, gio into download mode and flashed. It got stuck in "amss download" for 20 minutes, then i gave up. Of course the phone wouldn't boot (i only get warning triangle) only downloadmode works. Now, i tried to flash a rom (giopro 1.6) in odin to get it booting. But it gets stuck in "mibib download" (also for 20 minutes, gave up and tried again, still stuck at "mibib download. Here's what it says:
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
Also, running windows 7
As i would do anything to resurrect my device, what can i do? (will try odin on a different computer later today) (god i hate odin)
Thanks!
Click to expand...
Click to collapse

Thread closed as requested by OP.

[HELP ME!!!] Gio stop installing stock rom

Hi! I´m from Portugal so sorry if I have any mistake with my English.
I have a Galaxy Gio with lighy orange v6 2.3.6 ROM and I am pleased but wanted to see if I could get the original rom samsung again. I pulled the samfirmware.com the latest rom available with version 2.3.6. I followed a tutorial to install this rom by Odin.
I did as the tutorial but the green bar in odin downloader not grows, reaches 5 minutes, and remains small. In the part where it shows the processes that are taking place the last line says mbib download:
DownloadStart ...
<0> Create File ...
<1> StartThread Detected: 1
<2> StartThread Detected: 0
<3> StartThread Detected: 0
<4> Detected StartThread: 0
<5> StartThread Detected: 0
<6> StartThread Detected: 0
<7> StartThread Detected: 0
<8> StartThread Detected: 0
<1> setup connection ...
<1> odin mode .. plcatform check verification.
<1> VerifyPlatform: V0, P0, R0
<1> START!
<1> set download environment.
<1> big partition size!
<1> big partition size!
<1> big partition size!
<1> big partition size!
<1> big partition size!
<1> mibib download ..
Is it because I have CWM recovery?
PLEASE HELP!!
When I saw that the green bar in odin walked downloader not closed the program, took the took out the battery tel. At the turn appeared a strange image: A mobile phone and a computer and a warning sign in the middle (must mean lost connection) and does not pass daí.Ligo the cable again and the same. I can not even access the recovery cwm.
Pf say anything, I am very concerned pk can not go to the warranty (I have a rom root and "pirate")
greetings

nothing much
turn down your phone and flash again,it won't brick
Sent from my LT26i using Tapatalk 2

Frustrated with China bought I8150 Switch to Asian ROM?

Hi I would really appreciate your help.
I bought my wife a Chinese i8150 and she hates not getting timely updates or having access to all the Google Goodies...
Can I safely change to the Singapore Rom? ( I found this on SamFirmware.com )
I8150DXLM3_I8150OLBLD1_MM1
I realize some carriers in China only have 2G, while others have international 3G...
Realize need to follow directions for ODIN update.
Anything special I need to look out for? Anything I need to match on my phone to a particular firmware?
Thanks so much!
Derek

Should be no problem as long as you follow the Instruction here, but as a precaution, make a nandroid backup and backup the phone data (Contacts, etc, using Kies) Good luck.
Sent from my Modded Stock DXLA2 (Didn't have the mood to update)

reidzeibel said:
Should be no problem as long as you follow the Instruction here, but as a precaution, make a nandroid backup and backup the phone data (Contacts, etc, using Kies) Good luck.
Sent from my Modded Stock DXLA2 (Didn't have the mood to update)
Click to expand...
Click to collapse
Thanks for the help!

sorry...just wanna know will it get sim lock or not? i heard that some phone will hv carrier lock.
Sent from my GT-I8150 using xda app-developers app

reidzeibel said:
Should be no problem as long as you follow the Instruction here, but as a precaution, make a nandroid backup and backup the phone data (Contacts, etc, using Kies) Good luck.
Sent from my Modded Stock DXLA2 (Didn't have the mood to update)
Click to expand...
Click to collapse
Thanks,
I finally got around to this project (Some emergencies at work!)
I have chosen the I8150ZSLM4 Rom
But, Going into ODIN, I get stuck forever... Here is what I get:
Phone is in download mode (DOWNLOADING... Do not turn off target!!!)
(Odin 4.43)
Download Start...
<0> Create File...
<1> StartThread Detected : 0
<2> StartThread Detected : 1
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<2> setup connection...
<2> odin mode.. check plcatform verification.
<2> VerifyPlatform:V0, P0,R0
<2> START!!!
<2> set download environment.
<2> big partition size!!
<2> big partition size!!
<2> big partition size!!
<2> big partition size!!
<2> big partition size!!
<2> amss.mbn download..
I've tried both Protect OPS as well as deselecting Protect OPS
Any Ideas?
I'm downloading the European Rom now, to try that instead...
THANKS!

Did you install kies? I heard kies can interfere with Odin.
Sent from my GT-I8150 using xda app-developers app

Downloaded another ops file and it is now working...
Fingers Crossed...
Success!

Bricked GT-I9001

Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
And there it ends...please can someone help me ? Download mode is no problem ...can't go into recovery mode and odin won't flash...plzz help :crying:
I've tried a lot of ROMs (cyanogen 9, stock, flash recovery to CWM 5,6) and it still freezes at this point - amss.mbn download ...It is hard or soft brick ???

forgetwiki said:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
And there it ends...please can someone help me ? Download mode is no problem ...can't go into recovery mode and odin won't flash...plzz help :crying:
I've tried a lot of ROMs (cyanogen 9, stock, flash recovery to CWM 5,6) and it still freezes at this point - amss.mbn download ...It is hard or soft brick ???
Click to expand...
Click to collapse
Okay you can first try odin and reflash the correct firmware.
See here. http://broodplank.net/old/flashsamsungi9001.php
Or if everything else fails check this thread. http://forum.xda-developers.com/showthread.php?t=1330491
Good luck.

first step with flashin with odin failed as always, maybe because phone is not rooted :-/ and second method with using only linux co-op programs, it's difficult for me..maybe I just ask in special service ..but I'll pay..a lot I think

forgetwiki said:
first step with flashin with odin failed as always, maybe because phone is not rooted :-/ and second method with using only linux co-op programs, it's difficult for me..maybe I just ask in special service ..but I'll pay..a lot I think
Click to expand...
Click to collapse
Most likely you are using a damaged firmware. I have fixed many samsungs and have encountered this issue. I have the odin file which worked for me and if that doesnt work it could be a hardware issue. If you reflow the board it could possibly flash correctly afterwords. [email protected]

I've tried at least 5 different stock roms, cyanogenmode 9, try to flash cwm 5,6...nothing works...I think I bricked because of not rooting phone before

HELP! My Galaxy W I8150 Stucked at Odin Mode Only

Goot day XDA developers, I'm am newbie in this site. Sorry for my english.
My Galaxy W I8150 Stucked at Odin Mode Only, I cant access the Stock recovery or even use my phone, when I powered it up normally it states that some upgrade failed on my phone and i need to use kies for emergency recovery.
I tried to use kies but whenever I try to connect it on usb, it just connecting only. It doesn't detect my phone.
Odin detects my phone, but whenever I try to flash STOCK ROM it hangs on this status:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I tried to flash CWM via odin but it hangs for several hours on this status:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> recovery.img download..
Tried to install drivers, change port, change computer, change USB cable.
same results, any other way? i dont have the warranty card so I can't take it to Samsung Service Center.
Thanks in advance.
Best regards,
LourdesMayLao

LourdesMayLao said:
Goot day XDA developers, I'm am newbie in this site. Sorry for my english.
My Galaxy W I8150 Stucked at Odin Mode Only, I cant access the Stock recovery or even use my phone, when I powered it up normally it states that some upgrade failed on my phone and i need to use kies for emergency recovery.
I tried to use kies but whenever I try to connect it on usb, it just connecting only. It doesn't detect my phone.
Odin detects my phone, but whenever I try to flash STOCK ROM it hangs on this status:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> amss.mbn download..
I tried to flash CWM via odin but it hangs for several hours on this status:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> recovery.img download..
Tried to install drivers, change port, change computer, change USB cable.
same results, any other way? i dont have the warranty card so I can't take it to Samsung Service Center.
Thanks in advance.
Best regards,
LourdesMayLao
Click to expand...
Click to collapse
Which ODIN version are you using?
Which CWM version are you using? Link to the download page?
Which driver version are you using? Link to the download page (if available)?
Where did you get the ROM from? Link to the download page?
Did you check the md5sum hash in order to make sure the file you downloaded has been fully downloaded?