Related
Hiya, I got a BT800 for Christmas from my lovely wife and am having a hell of a time getting it to activate voice dialling!
Having paired it and chosen to use it as the hands free device, I can use it for phone calls that I start from the phone, but the Exec doesn't do anything when I 'tap' the answer button (one beep) or squeeze it(beep, pause, beep).
I've even just restored the original rom (hard-reset, basic install) and it still doesn't do anything...
Did anyone else have this problem? Is there a stage I'm missing out?
Hope someone can help, I've a nasty feeling it's too late to return it to Amazon...
Might be a daft question, but have you added your voice tags (or re-added after hard reset)?
Thanks for the reply, I was never intending to use voice speed dial (preferring voice command by miles) and so didn't record any tags. Even without any, you should still get the app launching and a message that there aren't any tags recorded. My problem was that I wasn't even getting that.
I can't claim to have solved the problem, but at least I no longer have it! I reinstalled the original O2 ext_rom and did a nice clean "Basic" install then put my customised ext_rom back and reset again. Having paired the headset I was able to launch voice speed dial from it, so went ahead and installed voice command, made the registry change to launch VC from the headset and am laughing.
I wish I knew what had caused the problem so I could avoid doing it again! I suspect that it was an attempt to restore my bluetooth registry settings on a rebuild that was the cause... Certainly I didn't try to set it up automatically the second time round and it *did* work, but there are too many variables to be sure.
HTH someone!
The Universal has no NATIVE support for Voice Dial using Voice Command. You have to do the following so it will work via VOICE COMMAND as it has to bypass the Installed Vocie software:
Install Voice Command to the default location.
Fire up a registry editor
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
This should now launch Voice Command
Maybe you made a mistake like missing a letter?
If you have done the above and it still doesnt work, then i'm just as lost as you are
sorry, browser problem, message was posted twice
I'm using the BT800 with my Qtek 9000 (Original ROM) and don't have any problems with voice dialing. After pressing the button on the Jabra within a second or 2 the voice dialing application is started, I hear a start sound, speak the name and it automatically starts dialing.
I have installed the latest BT800 firmware (becaus of the international dialing bug) and had not tested this functionality with the original firmware. Which firmware are you using?
MvanIperen said:
I'm using the BT800 with my Qtek 9000 (Original ROM) and don't have any problems with voice dialing. After pressing the button on the Jabra within a second or 2 the voice dialing application is started, I hear a start sound, speak the name and it automatically starts dialing.
I have installed the latest BT800 firmware (becaus of the international dialing bug) and had not tested this functionality with the original firmware. Which firmware are you using?
Click to expand...
Click to collapse
Which button do you have to press to activate the voice dial? The left or the right button under the LCD? Is it Tap or Hold, the button i mean?
@jorgee: 1st post - thanks, that's what I meant earlier when I said I'd done the reg fix and it all worked
2nd post - to activate voice dialling on a UK O2 Exec, you press the 2nd button from the left on the front of the device - next to the camera button.
@ MvanIperen, I'm using the latest BT800 firmware too, when I did a couple of rebuilds, the problem went away and it now behaves as you describe.
@ all, thanks for the replies! It was just me after all! Mental note: Mess with the registry at your peril!
[quote="this_mike
2nd post - to activate voice dialling on a UK O2 Exec, you press the 2nd button from the left on the front of the device - next to the camera button.
[/quote]
I meant is there anyway to activate voice dial from the headset? Can i only activate it by pressing the voice command button? I mean lets say my phone's in my drawer and i have the BT800, do i have to pull out the phone to be able to use the voice dial?
Jorgee said:
I meant is there anyway to activate voice dial from the headset? Can i only activate it by pressing the voice command button? I mean lets say my phone's in my drawer and i have the BT800, do i have to pull out the phone to be able to use the voice dial?
Click to expand...
Click to collapse
Maybe I misunderstand what you're asking.
You posted the registry change to make this work higher up the page.
Pressing the answer button on the headset does fire up Voice Command but only if the display is open or in portrait mode. If it's closed in your pocket protecting the screen then it won't work
I've never installed voice command, i was talking about the built in voice dial application. If the QTEK is in my pocket, and i want to call someone, which button on the headset/BT800 do i press to activate voice dial? And is it push or push and hold? Do i ghet any kind of audible warning telling me i can start speaking the voice tag?
I hope this time i am a bit clearer, sorry for the previous confusing post.
Jorgee said:
I've never installed voice command, i was talking about the built in voice dial application. If the QTEK is in my pocket, and i want to call someone, which button on the headset/BT800 do i press to activate voice dial? And is it push or push and hold? Do i ghet any kind of audible warning telling me i can start speaking the voice tag?
I hope this time i am a bit clearer, sorry for the previous confusing post.
Click to expand...
Click to collapse
On the BT800:
- To activate voice dialling (whether using MS Voice Command or the 'standard' voice dialling app) using a BT800 headset, press briefly the button nearest the headset microphone.
- To redial from the headset the last number dialled, press and HOLD the button nearest the headset microphone.
This works for me whatever situation the Exec is in: open, closed, portrait, landscape. I'm using the default voice-dialling software, not the MS one. Hope this helps.
Thanks SiliconS,
That was the answer i was looking for, sorry i had to bother you guys instead of reading the manual as my manual is in Spanish and i am only a beginner-intermediate level reader.
Again THANKS!!!! Very appreciated
Are any of you folks running WM2003SE? See, I was able to make that registry change and do a soft reset and have Voice Command working through the BT headset on my old machine, but it was running WM2003 (not the second edition version). From what I have read, SE doesn't seem to like that registry change, as when you make it, all that will happen is the connection opens when you tap the button on the HS, but the ability to use VC is not there.
I know there must be some way to do this. Any opinions or suggestions would be fab!
Thanks much!
I have a dutch ROM. I cannot find how to record voice dialing commands, moreover, the manual does not mention anyting about it.
What's up??
Voice dialling
There is no voice dialling option on the UK spec version either, I've tried MS Voice Command v1.6 and that doesnt work at all either, anyone got any ideas?
It works. Voice Command gets to the one hardware button assigned that's configurable. Just hold the Call button until u hear a beep.
I disabled Voice Command though due to the ringtone volume bug. Every 2 seconds the ringtone gets low for an announcement that you don't hear. Still waiting for a proper fix without all the work of replacing files.
I was looking for the original voice dialing function. But it really isn't there on the TP2. Voice Command is much better though. But damn that bug.
Another problem is that I use it on my bikehelmet when driving. But on the TP2 you need to hold the call button 3 secs (using Voice Command). That turns my bluetooth communication system off. xD
On my previous phone Xperia X1 I could assign a button without needing to hold it for 3 seconds. That worked for my bikesystem.
Google voice2go
Cyberon Voice speed dial is the best for the job but didnt try it yet. Dunno compatible with broadcom/widcomm stack if using btooth hfree. anybody tried it ?
I try Cyberon Voice speed dial, it seem to work well on mic of phone . but it don't work by BT activate, I think BT stack not support. Any one can solve this?
tornado said:
I try Cyberon Voice speed dial, it seem to work well on mic of phone . but it don't work by BT activate, I think BT stack not support. Any one can solve this?
Click to expand...
Click to collapse
Can you post a download link for this software? Thanks
Pimmr said:
Can you post a download link for this software? Thanks
Click to expand...
Click to collapse
see link in http://forum.xda-developers.com/showthread.php?t=523114
MS Voice Command works gr8 at least when i talk to my phone english
you have to buy the voice command software...
terryd1980 said:
There is no voice dialling option on the UK spec version either, I've tried MS Voice Command v1.6 and that doesnt work at all either, anyone got any ideas?
Click to expand...
Click to collapse
you have to buy the voice command software from Microsoft, its about $39.00. None of the foreign phones came with bluetooth voice command software...
Yes MS voice command works like a charm on TP2
Not through Bluetooth it doesnt, thats the main point of voice dialing, I cant fiddle with my phone whilst driving as thats illegal, voice dialing through bluetooth was a breeze with Voice Command v1.6 on the old Kaiser, I need to find out how to get that functionality again.
The Telus version of the Touch Pro2 comes with Voice Command 1.6.21052 in ROM
terryd1980 said:
Not through Bluetooth it doesnt, thats the main point of voice dialing, I cant fiddle with my phone whilst driving as thats illegal, voice dialing through bluetooth was a breeze with Voice Command v1.6 on the old Kaiser, I need to find out how to get that functionality again.
Click to expand...
Click to collapse
after reading your post sent a question to HTC...cut a long story short they tested MVC on a TP2 and through the BT headset succesfully activated a command... when i first contacted they sent the following cab and suggested i install ... so this may help
CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB
did not buy because of this post but according to HTC the profile does work on TP2 so back on final list after my 1st choice the B7610 is pushed back to Oct launch
Due to speaking to HTC support who said they had voice over BT headset working on TP2 brought one and low and behold it does not work ... not happy
Nice to know.
I googled CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB got redirected to the HTC site.
http://www.htc.com/au/SupportDownload.aspx?p_id=71&cat=3&dl_id=277
Guess what. Not available for my TP2.
ChriX84 said:
Nice to know.
I googled CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB got redirected to the HTC site.
http://www.htc.com/au/SupportDownload.aspx?p_id=71&cat=3&dl_id=277
Guess what. Not available for my TP2.
Click to expand...
Click to collapse
So that's it, there is no voice dialing via bluetooth?
I've got the same issue with this phone, I could not activate voice dialer to listen me by pressing button on handsfree.
Is there anyone who can fix it????
hecksk said:
So that's it, there is no voice dialing via bluetooth?
I've got the same issue with this phone, I could not activate voice dialer to listen me by pressing button on handsfree.
Is there anyone who can fix it????
Click to expand...
Click to collapse
I emailed in detail about this problem. Mentioning that Voice Command only works on the phone itself by holding the call button for 3 secs. When using the bt handsfree set the handsfree set turns off when holding the button for 3 secs on it. While it works perfectly on my old Xperia X1 (wich is made by HTC too). With 3 different bt sets. No holding buttons for 3 sec. But only by shortly pressing the button.
Hopefully they answer with good news.
guys, I have an idea: what if we use AEB button plus to map voice command to one of the vol key-long press or double press for example, and then we see if the BT headset is capable of invoking it using its own volume keys? dunno if it's clear enough...
you might try it, so no long press on power button of the headset or so...
the other problem: even if my strange idea would work, I dunno if then the TP2 / voice command would listen to my commands through the BT headset.. but it might be worth a try
this absence of voice dialing and all this problems are driving me mad
cheers!
Can someone confirm if MS Voice (UK) works on the TP2?
When I installed this on my Diamond, it f***ed up the phone and required a hard reset .... twice! Once I thought it was my fault, but I did it again to make sure, and no it was the phone!
It worked great on my previous phone, but I've just got this one the way I like it, and would not like to have to reset everything
I have the TMoUS TP2 that came with MSVC preinstalled and it works perfectly with my Motorola S9 headset via BT.
Maybe try to get the version in the TMo ROM?
S
Hi Guys,
Does anyone have a solution for the problem that the call button on bluetooth headsets won't work anymore with the TP2?
I use it in combination with Voice Command which worked flawlessly with the Touch Diamond, it's also been set to the same (and only) hardware key as the diamond but it won't work on the headset!?
It works fine when you press and hold the call button on the phone though...?
thanks!
jan
redsunpost said:
Hi Guys,
[...]
It works fine when you press and hold the call button though...?
[...]
Click to expand...
Click to collapse
When you say it works fine, do you mean through the BT headset, or just through the speakerphone?
P.S. I had an opportunity to talk with someone at Microsoft, and the response I received was "it's a known problem" and "wait for the next update or next version".
Alas...
i've edited it..
Strange problem cause the diamond had the same windows mobile version?
redsunpost said:
i've edited it..
Strange problem cause the diamond had the same windows mobile version?
Click to expand...
Click to collapse
It's nothing to do with the WinMo version, it's a different BT Stack.
I have been playing with it today and will post an update in the tweaks thread once I have it patched.
Cheers,
Beasty
Its not the BT Connection with a headset in general. That function works fine. I've tested it with my bt headset. Pressing the button I can accept the call and/or redial.
The problem lies within Voice Command itself. Once installed it gets assigned to the one and only hardware button configurable (hold call button for 3 seconds). The problem with that is when I do that with my BT headsets (normal and motorcycle one). They get powered off by pressing them for 3 seconds (same button). xD
I disabled Voice Command though due to the ringtone volume bug. Every 2 seconds the ringtone gets low for an announcement that you don't hear. Still waiting for a proper fix without all the work of replacing files.
I was looking for the original voice dialing function. But it really isn't there on the TP2. Voice Command is much better though. But damn that bug.
ChriX84 said:
Its not the BT Connection with a headset in general. That function works fine. I've tested it with my bt headset. Pressing the button I can accept the call and/or redial.
The problem lies within Voice Command itself. Once installed it gets assigned to the one and only hardware button configurable (hold call button for 3 seconds). The problem with that is when I do that with my BT headsets (normal and motorcycle one). They get powered off by pressing them for 3 seconds (same button). xD
I disabled Voice Command though due to the ringtone volume bug. Every 2 seconds the ringtone gets low for an announcement that you don't hear. Still waiting for a proper fix without all the work of replacing files.
I was looking for the original voice dialing function. But it really isn't there on the TP2. Voice Command is much better though. But damn that bug.
Click to expand...
Click to collapse
Sorry to disappoint you chrix, but the same hardware button (also hold) is used with the Touch Diamond.
Like I said they both look the same but with the TP2 it doesn't work, i'll be looking out for your patch beasty!
Another suffering TP2 user!
Hi guys,
I am also suffering with this issue as well. I did try and see if an old registry hack worked (changing HKLM\Software\OEM\VoiceCommand path=\Program Files\Voice Command\VoiceCmd.exe) but it didn't unfortunately. As previously pointed out in this forum, I think that this issue is more down to the fact that HTC seemed to have replaced the Bluetooth stack with their own proprietary version which isn't bad by all accounts, but does seem to lack this functionality. I might try and contact them to see if there's an update to resolve this but if someone does manage to create a patch for it, I'm sure there's a number of us who would be interested!
Cheers,
Barry
I installed voice command as well.
I'd already used the send button to put my lock on so it gave me another button (see attached).
Any body Know where the button is.
Hi,
I have the Rogers version Galaxy S Glide (Android 235), non-rooted as not allowed in order to use it for work email.
Using Motorola S10-HD stereo bluetooth headset.
When paired and connected, pressing the BT Call button does nothing.
Holding the BT Call button performs a redial of the last number.
I've read for other devices with Android 2.2 or higher that the Google Voice Dialer should start when holding the Call button but it doesnt. It will only start if I hold the search button on the phone itself.
Any confirmation from others or suggestions to make it work?
Thanks.
Maruzko said:
Hi,
I have the Rogers version Galaxy S Glide (Android 235), non-rooted as not allowed in order to use it for work email.
Using Motorola S10-HD stereo bluetooth headset.
When paired and connected, pressing the BT Call button does nothing.
Holding the BT Call button performs a redial of the last number.
I've read for other devices with Android 2.2 or higher that the Google Voice Dialer should start when holding the Call button but it doesnt. It will only start if I hold the search button on the phone itself.
Any confirmation from others or suggestions to make it work?
Thanks.
Click to expand...
Click to collapse
I am using a Nokia BT headset but working fine, can you check on Settings > Wireless and network > bluetooth settings > [Moto S10-HD] > tap and hold, and see if it's connected with "Phone" and "Media"
gabby131 said:
I am using a Nokia BT headset but working fine, can you check on Settings > Wireless and network > bluetooth settings > [Moto S10-HD] > tap and hold, and see if it's connected with "Phone" and "Media"
Click to expand...
Click to collapse
Yes, both "Phone" and "Media" are listed in the BT settings and both are ticked.
Have tried repairing with no change.
Maruzko said:
Yes, both "Phone" and "Media" are listed in the BT settings and both are ticked.
Have tried repairing with no change.
Click to expand...
Click to collapse
okay good, now check if you have Voice Search and/or Google Voice app....if you have it, try updating it from Play Store......
gabby131 said:
okay good, now check if you have Voice Search and/or Google Voice app....if you have it, try updating it from Play Store......
Click to expand...
Click to collapse
Yes, already updated it from the Play store.
Voice Search v2.1.4
Sent from my SAMSUNG-SGH-I927R using XDA
Do you have access to another Bluetooth headset you could try with the phone? Maybe there's something wrong with your current headset.
Maruzko said:
Yes, already updated it from the Play store.
Voice Search v2.1.4
Sent from my SAMSUNG-SGH-I927R using XDA
Click to expand...
Click to collapse
clpo13 already mentioned....try to delete other bluetooth headset connections you have....
clpo13 said:
Do you have access to another Bluetooth headset you could try with the phone? Maybe there's something wrong with your current headset.
Click to expand...
Click to collapse
I just tried a Nokia BH-104 but it also doesn't start Voice Search/Dial.
It also acts slightly differently to the S10-HD.
Call button press - nothing
Call button long press - nothing
Call button double press - last number redial
Sent from my SAMSUNG-SGH-I927R using XDA
Maruzko said:
I just tried a Nokia BH-104 but it also doesn't start Voice Search/Dial.
It also acts slightly differently to the S10-HD.
Call button press - nothing
Call button long press - nothing
Call button double press - last number redial
Sent from my SAMSUNG-SGH-I927R using XDA
Click to expand...
Click to collapse
Oh now this is becoming a real challenge. I also have Nokia BH-104 and I will, in all my best, try and replicate your issue and see.
EDIT: Positive! The call button on both my Nokia Headsets does not trigger Voice Search.....I can only redial my recent called contact via double press.
gabby131 said:
Oh now this is becoming a real challenge. I also have Nokia BH-104 and I will, in all my best, try and replicate your issue and see.
EDIT: Positive! The call button on both my Nokia Headsets does not trigger Voice Search.....I can only redial my recent called contact via double press.
Click to expand...
Click to collapse
I gather we are stuck?
Is there an app that allows remapping the BT call key to start another app, even though this function should work standard to start Voice Search?
Sent from my SAMSUNG-SGH-I927R using XDA
Maruzko said:
I gather we are stuck?
Is there an app that allows remapping the BT call key to start another app, even though this function should work standard to start Voice Search?
Sent from my SAMSUNG-SGH-I927R using XDA
Click to expand...
Click to collapse
I believe voice dial/search does that, don't know what google did....
On google phones (Nexus One/S), I believe, the voice dial app pops out once call key on BT headset is pressed.....but I wanna search further....
gabby131 said:
I believe voice dial/search does that, don't know what google did....
On google phones (Nexus One/S), I believe, the voice dial app pops out once call key on BT headset is pressed.....but I wanna search further....
Click to expand...
Click to collapse
I have a Motorola T505 in the car and it works well just that it does not work if the phone is at the lock screen. Needs to be unlocked for the call button to work. I assume you already made sure the phone was not at the lock screen. Just wondering is their anyway to make it work with the lock screen still active?
gabby131 said:
I believe voice dial/search does that, don't know what google did....
On google phones (Nexus One/S), I believe, the voice dial app pops out once call key on BT headset is pressed.....but I wanna search further....
Click to expand...
Click to collapse
Did a bit more testing.
I installed Vlingo, then something changed.
Instead of nothing happening when pressing the BT call button (Motorola S10-HD), now I get a choice:
Vlingo
Vlingo In-Car
but still no Voice Search option
I then found this App in the Play Google Store called Bluetooth Launch.
It allows you to assign any function to launch when the BT headset call button is pressed.
Now I get:
Bluetooth Launch
Vlingo
Vlingo In-Car
I set Bluetooth Launch to start Voice Search and it works!.
Vlingo is not a bad option either since it can be set to start listening on launching.
However, I realized all this only happens when the phone is in wake mode.
If its asleep, nothing happens, so you still have to touch and wake up the phone then press the BT button.
So still not totally hands free.
Asleep or locked the phone does not respond which is quite annoying when driving. My old phone (Windows Mobile 6.1) alloud voice dialing even though it was locked. I loved being paired with my Bluetooth as I still could do everything via Bluetooth. Sucks that Android which is so powerful does not work well with BT.
dudejb said:
Asleep or locked the phone does not respond which is quite annoying when driving. My old phone (Windows Mobile 6.1) alloud voice dialing even though it was locked. I loved being paired with my Bluetooth as I still could do everything via Bluetooth. Sucks that Android which is so powerful does not work well with BT.
Click to expand...
Click to collapse
Did some more searching and it appears that the move from Froyo to Gingerbread changed the way BT call wake up works.
When the phone is secured with a pin or pattern to unlock, the BT call button wont wake it up..
I did have a pattern lock enabled, which I've since turned off.
Now pressing the BT call button while the phone is in standby wakes it up and runs Vlingo straight into listening mode waiting for a command.
So seems to work OK, just that I cant have a secured lock enabled.
Maruzko said:
Did some more searching and it appears that the move from Froyo to Gingerbread changed the way BT call wake up works.
When the phone is secured with a pin or pattern to unlock, the BT call button wont wake it up..
I did had a pattern lock enabled, which I've since turned off.
Now pressing the BT call button while the phone is in standby wakes it up and runs Vlingo straight into listening mode waiting for a command.
So seems to work OK, just that I cant have a secured lock enabled.
Click to expand...
Click to collapse
Ya I have seen that it works as you mentioned but I like having the lock pattern and was hoping there was a way to get Bluetooth call button to work even though the phone is locked. Kind of sucks if there is no way around this. The whole point to the Bluetooth is that the phone can stay in my pocket locked so as not to press any buttons by accident and I can make calls from my Bluetooth device.
I'm on the road a lot and use a bluetooth headset all the time. On my HTC Amaze I was able to voice dial from my bluetooth headset but on the GN2 I can't get past the lock screen and when I do (get past the lockscreen) I have to use S voice. All I'm trying to do is use the voicedialing without ever picking up my phone. Unfortunately I've searched everywhere and can't find or figure it out. Is anyone else having this issue/know of a fix?
Simply pair your headset to your phone. Then with the phone on and you unlocked it, activate your BT headset while watching the screen. You'll need to accept a waver to activate it. Once it is actvated, you can use your BT headset. Youll hear a chime ti promt you to speak.
Sent from my SGH-T889 using xda premium
I gave that a try but unfortunately I still have to unlock the phone in order to use voice dialing. I use face recognition/pin & I'm using a Jawbone Icon.
The thing that annoys me is that I can do a redial(double press the call button) and it works without me having to touch the phone.
Sent from my SGH-T889 using Tapatalk 2
Having the same problem with BlueAnt Q1 and Q2. They both worked as such on my HTC G2:
(after all paired up and connected)
Push button on BT
Say "phone command"
BT responds "activating your phone's in-built voice commands on the connected phone"
G2 says "speak now"
I say "call Fred"
Phone dials Fred
On my SGN2:
(after all paired up and connected)
Push button on BT
Say "phone command"
BT responds "activating your phone's in-built voice commands on the connected phone"
Nothing happens
If I unlock the phone, S Voice is activated
I have some other BT devices, I'll see if they fare any better, maybe it is an issue with BlueAnt?
Queue515 said:
Having the same problem with BlueAnt Q1 and Q2. They both worked as such on my HTC G2:
(after all paired up and connected)
Push button on BT
Say "phone command"
BT responds "activating your phone's in-built voice commands on the connected phone"
G2 says "speak now"
I say "call Fred"
Phone dials Fred
On my SGN2:
(after all paired up and connected)
Push button on BT
Say "phone command"
BT responds "activating your phone's in-built voice commands on the connected phone"
Nothing happens
If I unlock the phone, S Voice is activated
I have some other BT devices, I'll see if they fare any better, maybe it is an issue with BlueAnt?
Click to expand...
Click to collapse
This is the same problem I have with the GN2, I've switched to a pattern lock and now I unlock my phone before using the Bluetooth. It defeats the purpose of being hands free. Once I get a car dock I'll go back to face unlock but this isn't very good. Luckily it's an easy work around and is probably one of the biggest problems I have with the phone. lol
Go to S Voice settings > check wake up in lock screen > set wake up command. ( i didn't do this part as i don't have pattern lock)
Open dialer > go to call settings > Accessory settings > Outgoing call conditions > Select Even when device locked.
Don't know if this helps but I can make calls no prob with my jawbone Icon. To activate S Voice you only need to press and hold the end call button on your headset and it should start up by itself. Once in a while you will not hear the special sound S Voice makes when it's activated (Don't know about headsets that don't support A2DP), that means it is not working properly. All you have to do is press the end call button on your bluetooth again and you will hear the end call sound. Then press and hold the end call button again to reactivate the s Voice, it should work again!
Thanks for your response.
I didn't have the Svoice set as you described, but the call setting was already set. Still not working. Can you try with screen lock set to "Secured with PIN"? That is the security setting required by my employer. I have tried it with and without "With swipe lock" checked. My BT is A2DP.
Queue515 said:
Thanks for your response.
I didn't have the Svoice set as you described, but the call setting was already set. Still not working. Can you try with screen lock set to "Secured with PIN"? That is the security setting required by my employer. I have tried it with and without "With swipe lock" checked. My BT is A2DP.
Click to expand...
Click to collapse
With the Pin enabled I cannot open S voice either.. That's kind of expected though because that's a security breach if I am able to bypass the lock screen just by opening SVoice. For company phones I guess security comes before convenience.
Thank you for confirming. Unfortunately, the workaround (putting the phone in car mode and leaving it open) is much less secure than letting me make a call from a paired device. Oh well.
sent from my phabulous phablet using xda premium