Hey Guys,
I have installed Vicious's JB GSM port of Jelly Bean on my verizion Galaxy Nexus. Everything works fine except when I am debugging my apps. I can't debug my compiled apps on the phone.
I also selected the device on AVD Manager and still its doesn't work. All developer options are enable on the phone (Unknown sources, USB debugging)
Would appreciate any feedback
[p.s - i am using the stock jelly bean kernel]
I noticed the same problem today too.
Had the same issue..
I had the same issue and trying reloading V3, loading a bunch of different kernels with no luck. I ended up doing the following to get a working Jellybean release as ADB / eclipse still working correctly for development.
t=1738018From this page:
TeamLiquid JellyBean V1- SU zip necessary - Stock Kernel
SuperSU for Jelly Build
vannilia kernal "Stock Flashable JellyBean kernel boot.img format: HIGHLY RECOMMENDED!!!"
Wifi Fix "If you want to stay on the stock kernel there is a WiFi fix here thanks to Mwalt2"
metalideath said:
I had the same issue and trying reloading V3, loading a bunch of different kernels with no luck. I ended up doing the following to get a working Jellybean release as ADB / eclipse still working correctly for development.
t=1738018From this page:
TeamLiquid JellyBean V1- SU zip necessary - Stock Kernel
SuperSU for Jelly Build
vannilia kernal "Stock Flashable JellyBean kernel boot.img format: HIGHLY RECOMMENDED!!!"
Wifi Fix "If you want to stay on the stock kernel there is a WiFi fix here thanks to Mwalt2"
Click to expand...
Click to collapse
What did you end up doing exactly? Flashing the stock kernel?
I'm getting the same errors showing the apk being installed but nothing working and wierd output in logcat.
Related
Hey all,
I decided to flash Jelly Belly 10.0 (4.2) and everything works fine until I flash the GAPPS- I've tried three different jb GAPPS from three different sources, and whenever I flash them, the next boot and from there on out is "setup wizard has stopped" and "com.android.GAPPs has stopped...", mostly giving me a Setup Wizard has stopped popup though, and it's keeping me from using the phone at all- not even pull down settings are responding.
Any ideas, maybe I'm not supposed to flash jb GAPPS?
Thanks!
AFAIK most of the 4.2 roms out include gapps in them, so there's no need to flash it over. Also, no official gapps package is out for 4.2 yet (most seem to contain pre-release versions of the 4.2 apps). That could be your problem.
I know what you're saying, but I'm also flashing the GAPPS linked in the ROM's original thread.... I also looked at the Pure AOSP 4.2 ROM for the VZW Nexus, they're linking to some 4.2 GAPPS package...I'll give it a go.
Thanks for replying!
Edit: Yeah that did it... For anyone else using Jelly Belly or any other AOSP 4.2 ROM, get GAPPS from here: http://old.bitsurge.net/android/gapps-4.2-JOP40C-121117.zip
So i recently updated my galaxy s3 to jelly bean. I installed many roms but the the problem is the same. When i use eclipse from my pc to debug a app i am working on, it fails saying that the apk failed to install because invalid. It searched online and i discovered that the problem is with the kernel and i should try to change it, i was suggested it the syiah kernel. The problem is that i never worked with kernels. How can i know if the kernel is compatible with my rom (i am using freegs3) ? Where do i find them? Has anyone solved this problem without chaning kernels?
http://forum.xda-developers.com/showthread.php?t=1508222 this is the post where i found the answer, is at the bottom
Hello and thank you for taking your time in reading, I will start by letting you know my samsung captivate glide is already rooted, android version 4.0.4 and stock kernel 3.1.10-I927ICLJ3-CL970642, now I found this wonderful thread in the development forums:
http://forum.xda-developers.com/showthread.php?t=1892538
mostly im interested in having more available RAM, but it does have a lot of good perks, after reading thru all 32 pages I could not find instruction on how to flash a kernel so here are my questions.
1) how do i flash a new kernel on my phone ?
2) Do i need to flash a rom as well or can i keep the stock ICS with the new kernel ?
Download and install clockworkmod .. the rest will make sense after that
yohan4ws said:
Download and install clockworkmod .. the rest will make sense after that
Click to expand...
Click to collapse
Oh I forgot to mention I already have clockwork mod
not sure if you can keep the stock rom with the kernel (bone stock.) I don't see why not ... I used Dman's UCLJ3 pre-rooted rom and flashed litekernel onto it so you should be able to.
in CWM, install zip from sdcard, browse to your download folder on your phone and install it.
MAKE SURE you do a full backup first so you can revert if something doesn't pan out.
yohan4ws said:
not sure if you can keep the stock rom with the kernel (bone stock.) I don't see why not ... I used Dman's UCLJ3 pre-rooted rom and flashed litekernel onto it so you should be able to.
in CWM, install zip from sdcard, browse to your download folder on your phone and install it.
MAKE SURE you do a full backup first so you can revert if something doesn't pan out.
Click to expand...
Click to collapse
ty yohan, i see that flashing a kernel is pretty much the same as flashing a rom, I like the stock rom, how stable is Dman's ?
There's crashing issues with his AOKP lockscreen version but it could be because I installed thegreatergoods litekernel. So if you're going to download the pre-rooted debloaded deodex. etc etc.. go with the one that doesn't have the lockscreen. the 14 toggles mod will work and can be configured by quickpanel settings in apps.
One thing that shouldn't be overlooked is ICE Pop, it has a themed dialer (big plus) ... Thegreatergoods literom will be good as well, but personally I dont like the cyan and yellow colors in the messaging app.
I flashed the kernel with success but after testing it for a week I decided to go back to stock, tho speeds were amazingly fast the device was alot more unstable and I couldent handle all the crashes and reebots
How well does the phone work with CMRom ? ive been reading in this thread of some happy and some unhappy user
http://forum.xda-developers.com/showthread.php?t=2109774&highlight=best+rom
I recomend to you icePop ROM 1.3
HexbladeInc2 said:
How well does the phone work with CMRom ? ive been reading in this thread of some happy and some unhappy user
http://forum.xda-developers.com/showthread.php?t=2109774&highlight=best+rom
Click to expand...
Click to collapse
Hi! I probe CM10rom but it do not have still audio in recording video, and for me is important.
Now, I have IcePop ROM 1.3 and I like it. Stable and with theatering, video record with audio and my car bluetooth link OK.
Rgrds
koximo
Hi all. since I'm pretty new I'm not yet able to post in the development forum. My question is fairly straightforward.
I have rooted, installed custom roms/kernels on my SE Arc S for a while now, but every time by following either a youtube tutorial or a nice instruction sequence.
Curently I am running Slim-Bean 4.0 (by XtremeSilencer), I used the installation procedure from the original thread here: http://forum.xda-developers.com/showthread.php?t=1959054
I installed the Fusion Kernel provided in the description and everything got set up smooth. What I want to do now is upgrade to @besttt Slim-Bean based ROM, which fixes some bugs. his post is here: http://forum.xda-developers.com/showpost.php?p=45710450&postcount=2992
The Instructions are a bit confusing, since apparently I need to be running CM10.1 and I only know that CM10.1 means (Cyanogen mod 10.1) and that Slim Bean runs some sort of version? of it, but I couldn't find anywhere on my phone a clue about which version Im currently running with Slim Bean. As I said all I did was installing the base version 4.0 of Slim Bean by XtremeSilencer like the instructions on the main page taught me.
What procedures would I need to do to upgrade from the "Stock" Slim Bean 4.0 with the Fusion Kernel 4.5 (About Phone says its: 2.6.32.60-FusioN [email protected]) #PREEPT Fri Feb 22 23:49:51) to the Besttt custom SlimBean kernel?
1. Flash which Kernel via fastboot?
2. Wipe data/catche/etc
3. Install which ROM (zip)? - If I'm correct, Anzu mean Rom for Arc S ??
thanks a lot,
~Skaveelicious
Mate, as you said you are already on @besttt slim. But now you want to Upgrade. As in the guide stated. For that you must have latest slim rom by besttt, you can find that from his signature @besttt)
Install the kernel he said in that update.
Install slim bean 8.1 non stop gaming edition, its latest version of slim rom.
Then install the home and wifi fix.
Then gapps.
Then boot to main screen, then install wifi modules for that kernel.
You will get latest update for the slim rom.
Remember, official is better than update, as besttt said. There are some bugs.
sent from Gotham City
1. Kernel seems to be inside the zip like it says in the thread: "use kernel,, only incide my rom zip"
2. Yes data, cache, dalvik, system I think, if it says "full" wipe
3. Anzu = Arc S, and don't forget the gapps.
DeathStroke said:
Mate, as you said you are already on @besttt slim. But now you want to Upgrade. As in the guide stated. For that you must have latest slim rom by besttt, you can find that from his signature @besttt)
Install the kernel he said in that update.
Install slim bean 8.1 non stop gaming edition, its latest version of slim rom.
Then install the home and wifi fix.
Then gapps.
Then boot to main screen, then install wifi modules for that kernel.
You will get latest update for the slim rom.
Remember, official is better than update, as besttt said. There are some bugs.
sent from Gotham City
Click to expand...
Click to collapse
Sorry for the confusion. I'm running Slim Bean 4.0 by XtremeSilence and I want to upgrade to the Slim Bean based ROM by besttt.
idragonx said:
1. Kernel seems to be inside the zip like it says in the thread: "use kernel,, only incide my rom zip"
2. Yes data, cache, dalvik, system I think, if it says "full" wipe
3. Anzu = Arc S, and don't forget the gapps.
Click to expand...
Click to collapse
Inside the .zip there is an .img file. So basically what I need to do is extract the .img from the zip and:
1. flash the Kernel DarkAnzu Kernel via flashtool.
2. Wipe system/cache/dalvik cache
3. install de .zip via CWM
4. Install GAPPS via CWM
Well, the Kernel is the img inside the zip, no idea if it's the DarAnzu Kernel, but just flash the img inside the zip via fastboot in flashtool and then do the other steps.
I flashed it and it went perfectly. Now understand how this kernel+rom update works. Cheers and thank you all
Hey guys. So, I've been reading and reading and flashing and everything.
Got an S4. It was running 4.3 and I was having Wifi issues.
I had read it was a software issue and welp, I've always liked Cyanogen Mod so I installed that.
It installed the nightly build which was WAY too buggy (I use my camera a lot and it kept failing) edit: but the WiFi worked perfectly!
I got back to 4.2.2 now but now the WiFi is Totally not working now and i'm getting that message about
Kernel is not Seandroid enforcing
set warranty bit : kernel
and it takes forever to reboot.
Since I was on 4.3 do i need to flash that stock rom to get my stock kernel back?
Or can I install deoxed version??
I still need to put custom recovery too!
I know this is a lot of questions and i'm not much of a n00b.
Any help would be greatly appreciated.
Thanks in advance.
re: wifi not working
djphooka said:
Hey guys. So, I've been reading and reading and flashing and everything.
Got an S4. It was running 4.3 and I was having Wifi issues.
I had read it was a software issue and welp, I've always liked Cyanogen Mod so I installed that.
It installed the nightly build which was WAY too buggy (I use my camera a lot and it kept failing) edit: but the WiFi worked perfectly!
I got back to 4.2.2 now but now the WiFi is Totally not working now and i'm getting that message about
Kernel is not Seandroid enforcing
set warranty bit : kernel
and it takes forever to reboot.
Since I was on 4.3 do i need to flash that stock rom to get my stock kernel back?
Or can I install deoxed version??
I still need to put custom recovery too!
I know this is a lot of questions and i'm not much of a n00b.
Any help would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
If you are using any Cyanogen/AOSP/AOKP/GE/KiKat roms then please ignore the following.
If you are using a M919 Tmobile Samsung S4 Jellybean Touchwiz 4.2.2 based rom then here is
the way to fix your wifi issue.
Here is the download link for Ktoonsez's custom kernel:
http://ktoonsez.jonathanjsimon.com/sgs4/TW/KT-SGS4-JB4.2-TW-TMO-12.12.2013.zip
Download it and flash it using cwm/twrp recovery and the wifi will work for you again.
Good luck!
I'm running the stock rom but it seems like somehow it didn't overwrite the Cyanogen kernel.
re: kernel
djphooka said:
I'm running the stock rom but it seems like somehow it didn't overwrite the Cyanogen kernel.
Click to expand...
Click to collapse
That means that this kernel is for you..... "IF you are really running the stock rom".
If your rom was REALLY stock, I mean if you "ODIN" flashed the stock rom using the
official Samsung M919 4.2.2 Jellybean Touchwiz firmware from http://SamMobile.com
or other sources then whatever kernel you had the stock rom would have over-written it.
If you are sure that it's not over written that means that you have NOT ODIN flashed the
official 4.2.2 M919 MDL firmware.
Good luck!