Develop Bugs

[Q] Status 7 Error Cyanogenmod 7 Nightly Build 14

Dear Forum Members,
I have a problem with my Desire HD.
My phone is rooted and has the 3.0.0.5 ClockworkMod Recovery installed.
I wanted to install Cyanogenmod 7 Nightly Build 14 for HTC Desire HD.
Iv'e downloaded the .zip file and put it on my SD-Card.
I went to ROM Manger and tried both ways (Install ROM from SD-Card ore Reboot in recovery mode and install it there).
Both ways I ended up getting this strange message:
Installing update…
assert failed: getprop("ro.product.device") == "bravo" || getprop("ro.build.product") == "bravo" || getprop("ro.product.board") == "bravo"
E:Error in /sdcard/cm_bravo_full-14.zip
(Status 7)
Installation aborted.
Is any one seen this error before? and if so can you please help me.
Kind Regards,
Whiteness.

Whiteness said:
Dear Forum Members,
I have a problem with my Desire HD.
My phone is rooted and has the 3.0.0.5 ClockworkMod Recovery installed.
I wanted to install Cyanogenmod 7 Nightly Build 14 for HTC Desire HD.
Iv'e downloaded the .zip file and put it on my SD-Card.
I went to ROM Manger and tried both ways (Install ROM from SD-Card ore Reboot in recovery mode and install it there).
Both ways I ended up getting this strange message:
Installing update…
assert failed: getprop("ro.product.device") == "bravo" || getprop("ro.build.product") == "bravo" || getprop("ro.product.board") == "bravo"
E:Error in /sdcard/cm_bravo_full-14.zip
(Status 7)
Installation aborted.
Is any one seen this error before? and if so can you please help me.
Kind Regards,
Whiteness.
Click to expand...
Click to collapse
The error messages suggest your trying to install the ROM for Bravo or the original Desire, I think you may have the wrong ROM?

Good be now downloading the ace version
Let you know!

"Status 7" error in CWM while installing ROM

Hey everyone,
I'm currently trying to install the latest CM10 FXP131 ROM on my Arc S Lt18i. I flashed my phone to the first ICS Stock ROM by Sony and rooted it to install CWM Recovery.
Now, the next step was to flash the ROM. So I downloaded the Anzu version of the ROM, copied it to my SD and changed into Recovery mode. I picked "install zip from sdcard" and chose the ZIP I've just downloaded.
But instead of installing the ROM I got a error every time. It says
E:Error in /sdcard/cm-10-20120731-UNOFFICIAL-anzu.zip
(Status 7)
Installing aborted
Can someone help me to finally install the ROM?
Thank you so much,
Max

You also need to install the kernel.

Something like this a few lines above?
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18I" || getprop("ro.product.board") == "LT18i"

T-119a said:
Something like this a few lines above?
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18I" || getprop("ro.product.board") == "LT18i"
Click to expand...
Click to collapse
Nope, this is the full protocol:
Finding update package...
Opening update package...
Installing update...
set_perm: some changes failed
E:Error in /sdcard/cm-10-20120731-UNOFFICIAL-anzu.zip
(Status 7)
Installation aborted.
Just for information. The first thing I've done after installing CWN was straight installing the .zip . I did not flashed the kernel or wipe. Maybe that has something to say?
EDIT: Oh, and after every try to install the ROM my phones hangs up at the "SONY" logo and won't boot. I always have to flash the original sony .ftf to make it run again :/
Thank you,
Max

Open the cm-10-20120731-UNOFFICIAL-anzu.zip with a zip viewer, extract the boot.img and flash it via fastboot. Then perform a Full Wipe and try to flash the ROM again.

T-119a said:
Open the cm-10-20120731-UNOFFICIAL-anzu.zip with a zip viewer, extract the boot.img and flash it via fastboot. Then perform a Full Wipe and try to flash the ROM again.
Click to expand...
Click to collapse
I will try that, but I need a unlocked bootloader for that all, right? Or isn't that necassary at all?

maexjen said:
I did not flashed the kernel or wipe. Maybe that has something to say?
Click to expand...
Click to collapse
Yep.

maexjen said:
I will try that, but I need a unlocked bootloader for that all, right? Or isn't that necassary at all?
Click to expand...
Click to collapse
If you want to flash cyanogen you have to unlock your bootloader. An unlocked bootloader is recommend for flashing custom Roms and kernels.

Thank you for your clarification! It's working now! =)

T-119a said:
Something like this a few lines above?
assert failed: getprop("ro.product.device") == "LT18i" || getprop("ro.build.product") == "LT18I" || getprop("ro.product.board") == "LT18i"
Click to expand...
Click to collapse
Hello... I'm flashing new ROM and facing Status 7 error with what you said at the front... Here's the error message:
assert failed: getprop ("ro.product.device") == "c8812" | | gerprop ("ro.build.product") == "c8812" | | getprop ("ro.product.device") == C8812 "| | getprop (" ro.build.product ") ==" C8812 "
E: Error in / sdcard/C8812_20120822005.zip
(Status 7)
Installation aborted.
Can I know the cause of this and how to overcome that? Please & Thanks!

I'm getting this exact same problem on my Arc S except with cm10 Fxp138. My bootloader is unlocked, im rooted, i flashed the kernel first and STILL i get Status 7 error installation aborted. If someone could help, that'd be great

I am also getting the same error but on Sony LWW with Pacman JB ROM.

I also got this status 7 error with the code "Status 7 - symlink: some symlinks failed".
After deleting the first line (before the ; sign) I could get the rom to install.
I would like to know, why / how this can happen... Maybe flashing a false kernel or other things?

I think maybe binary and script don't match each other; or maybe there's error in text of script
(sorry for my bad english)

try to flash the kernel lupus

Firstly, give us recovery log. Secondly, I had such an issue with CM7.1 quite long time ago. I've fixed it by changing phone's ID from LT18i to LT15i via fastboot. There's a proper command for it.
1. Go to CWM
2. Plug phone
3. "adb pull tmp/recovery"

WHAT ?
Try a full wipe ( data , cache )

CM10 on my ARC
I have the same, install new baseband upper then 70 or official ics 4.0.4 then use flashtools to install kernel and flash rom
You have unlocked bootloader ??

i have "Status 7 - symlink: some symlinks failed" when i try install Jelly-v4.zip. anyone help me, i have downloaded that rom 3 times but it can't help

meinmain said:
Hello... I'm flashing new ROM and facing Status 7 error with what you said at the front... Here's the error message:
assert failed: getprop ("ro.product.device") == "c8812" | | gerprop ("ro.build.product") == "c8812" | | getprop ("ro.product.device") == C8812 "| | getprop (" ro.build.product ") ==" C8812 "
E: Error in / sdcard/C8812_20120822005.zip
(Status 7)
Installation aborted.
Can I know the cause of this and how to overcome that? Please & Thanks!
Click to expand...
Click to collapse
I had a lot of frustration with this. Had many attempts. The only thing that seemed to work for me was to flash the doomlord kernel. Then it worked perfectly.

[Q] HTC Desire aborts when installing ROMS

I'm running Clockworkmod Recovery v5.0.2.0, everything is wiped. I'm trying to install a ROM but I get this error message:
assert failed: getprop("ro.product.device") == "bravo" ||
getprop("ro.build.product") == "bravo"
E:Error in /sdcard/Elk759_0.26.zip
(status 7)
Installation aborted.
I used 4 different ROMs and I get the same message. What should I do?

Siousat said:
I'm running Clockworkmod Recovery v5.0.2.0, everything is wiped. I'm trying to install a ROM but I get this error message:
assert failed: getprop("ro.product.device") == "bravo" ||
getprop("ro.build.product") == "bravo"
E:Error in /sdcard/Elk759_0.26.zip
(status 7)
Installation aborted.
I used 4 different ROMs and I get the same message. What should I do?
Click to expand...
Click to collapse
Change your recovery ASAP to a newer CWM version or much better : 4ext touch recovery and see if it works.
________________________________
Please press thanks if I helped you in any way.
Sent from my HTC Desire using the xda app.

Check the hboot requirement of the roms and the md5 of the zips. If all is okay then it's time to upgrade the recovery. Flash 4ext as it is the best of'em all.

Siousat said:
I'm running Clockworkmod Recovery v5.0.2.0, everything is wiped. I'm trying to install a ROM but I get this error message:
assert failed: getprop("ro.product.device") == "bravo" ||
getprop("ro.build.product") == "bravo"
E:Error in /sdcard/Elk759_0.26.zip
(status 7)
Installation aborted.
I used 4 different ROMs and I get the same message. What should I do?
Click to expand...
Click to collapse
Hm, also make sure you are using htc desire compatible rom.
________________________________
Please press thanks if I helped you in any way.
Sent from my HTC Desire using the xda app.

Siousat said:
getprop("ro.product.device") "bravo"
Elk759_0.26.zip
Click to expand...
Click to collapse
I think reading before answering a question is a good place to start
Sent from my HTC Desire

[Q] STATUS 7. Instaltion aborted!! ?

Carnt install roms no more...
--installing: /sdcard/pa_marvel-2.54-beta ect .zip....... finding update package...
opning update package....
installing update....
assert failed: getprop("ro.product.device") == marvel" l l getprop("ro.build.product") == marvel
E : Error in /sdcard/pa_marvel-2.54-beta...ect .zip
(status 7 )
installation aborted.
this works for every rom my phone was working fine withh roms, then i wiped maby the wrong thing in recovery? then that happend

lostghostrise said:
Carnt install roms no more...
--installing: /sdcard/pa_marvel-2.54-beta ect .zip....... finding update package...
opning update package....
installing update....
assert failed: getprop("ro.product.device") == marvel" l l getprop("ro.build.product") == marvel
E : Error in /sdcard/pa_marvel-2.54-beta...ect .zip
(status 7 )
installation aborted.
this works for every rom my phone was working fine withh roms, then i wiped maby the wrong thing in recovery? then that happend
Click to expand...
Click to collapse
you downloaded rom zip correctly?might in downloading file was corrupted.download rom again and they try.

lostghostrise said:
Carnt install roms no more...
--installing: /sdcard/pa_marvel-2.54-beta ect .zip....... finding update package...
opning update package....
installing update....
assert failed: getprop("ro.product.device") == marvel" l l getprop("ro.build.product") == marvel
E : Error in /sdcard/pa_marvel-2.54-beta...ect .zip
(status 7 )
installation aborted.
this works for every rom my phone was working fine withh roms, then i wiped maby the wrong thing in recovery? then that happend
Click to expand...
Click to collapse
Is your phone marvelc??

varun26296 said:
Is your phone marvelc??
Click to expand...
Click to collapse
Its a marvel . I think iv tried redownloading, i wiped my sd card, an did it agin, nothing still.. i mite of wiped somthign wrong in the sd -card format thingy, will any of those format options make it screw up?

Installation*
Get it together, OP.

wwcjr91 said:
Installation*
Get it together, OP.
Click to expand...
Click to collapse
Sorry yes Installation. I Just tried a differnt rom still no luck, same message poping up.I had to run flash rom without recovery, just to get back to normal stock so i can still use my phone.
SOLVED. downloaded rom manger installed cwm through manger. i had the 2012 on there already wasnt working for somreason

[Q] Status 7 error installing pacv20 :s

HI guys, i have a really big problem, i was playing on my device when suddenly screen turn off bur my device still turn on :s so i decide to reflesh the rom, the cwm screen appears but it from rom no.. i dont understand so i try to reinstall pac v20 but i dont have files on my sdcard and the usb mount from recovery doesnt work so i install ics17.zip advanceds tock ics but i cant install pac v20 rom i get :
assert Failed: getprop("ro.product.device") =="LT26i" || getprop("ro.build.product") == "LT26i" || getprop("ro.product.device") == "nozomi" || getprop("ro.build.product") == "nozomi"
E: Error in /sdcard/nozomi_PAC_JB_4.2.2-v20.0.0.zip
(Status 7)
Installtion aborted
so what can i do plz , its my work device so ..:s i'm in s****
THX YOU

Is yours an SL?
Sent from my 4.2.2 Xperia S via Tapatalk

Ben36 said:
Is yours an SL?
Sent from my 4.2.2 Xperia S via Tapatalk
Click to expand...
Click to collapse
No it is a Xperia S
But i solve the problem i just delete all before the first "mount" in the updater-script file in zip rom (/META-INF/com/google/android with notepadd++ i save , then copy zip to my sdcard and it works fine i just reflash pac v20
thx you