Develop Bugs

Heelp!!!(sgy stock at samsung logo (brick)

hi GUYZ,,
Please anyone,, my SGY hang up at samsung logo,,
here is the problem cenario---suppose to be iwas installing BEAT confiG through CFW,,then accidentally i press the FORMAT SYSTEM on my UNit,,then when i reboot my phone its HANG UP,,
Ill tried the CFW and ODIN recovery but still no good,,, help please,,

try reflashing stock rom through odin,

try flashing via odin..
there some tutorials on the android development section..
Sent from my GT-S5360 using XDA

kimerika said:
hi GUYZ,,
Please anyone,, my SGY hang up at samsung logo,,
here is the problem cenario---suppose to be iwas installing BEAT confiG through CFW,,then accidentally i press the FORMAT SYSTEM on my UNit,,then when i reboot my phone its HANG UP,,
Ill tried the CFW and ODIN recovery but still no good,,, help please,,
Click to expand...
Click to collapse
download the official firmware and then try to flash ... !!
hopefully it will solve ur problem ...

yes i did flash via odin,, i laso try to upgraded 2.3.5 to 2.3.6 but still no good

kimerika said:
yes i did flash via odin,, i laso try to upgraded 2.3.5 to 2.3.6 but still no good
Click to expand...
Click to collapse
still stuck at samsung logo .. ??

which firmware did you flashed using odin
you need to flash odin supported firmware
Those from sam mobile & others are not odin supported
Sent from my GT-S5360 using Tapatalk 2

Millan.SIS said:
which firmware did you flashed using odin
you need to flash odin supported firmware
Those from sam mobile & others are not odin supported
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
who said sam mobile firmwares are not supported .. ? lolxx...

avilove4u said:
who said sam mobile firmwares are not supported .. ? lolxx...
Click to expand...
Click to collapse
Just first try yourself then post...
Sent from my GT-S5360 using Tapatalk 2

Go here for odin supported firmware
http://forum.xda-developers.com/showthread.php?p=21846620
Download the latest firmware for your country
Tutorial :
http://forum.xda-developers.com/showthread.php?p=21846668
Sent from my GT-S5360 using Tapatalk 2

Millan.SIS said:
Go here for odin supported firmware
http://forum.xda-developers.com/showthread.php?p=21846620
Download the latest firmware for your country
Tutorial :
http://forum.xda-developers.com/showthread.php?p=21846668
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
but most firmwares are supported...

do a data wipe?/factory reset in stock recovery
reboot
Sent from my Samsung Galaxy Y

avilove4u said:
but most firmwares are supported...
Click to expand...
Click to collapse
No buddy previously they were...
but now they are coming in fused bundles.... Our odin doesn't support that
Sent from my GT-S5360 using Tapatalk 2

Millan.SIS said:
No buddy previously they were...
but now they are coming in fused bundles.... Our odin doesn't support that
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
ok .... !!!

after reflashing. wipe data and wipe cache partition

if you succeed flashing via odin dont forget the hard reset so your mobile will be fresh again

FuranshisuKurogawa said:
if you succeed flashing via odin dont forget the hard reset so your mobile will be fresh again
Click to expand...
Click to collapse
You just repeated what i said. In the other way of saying it. Hahaha. Lol xD
Sent from my GT-S5360

As now you've got back your firmware, be sure to take a backup by CWM before flashing any custom rom or theme. This way, if you stuck up again, you'll be able to restore your firmware along with the data.
Sent from my GT-S5360

i've used doky's guide and smiled all the way haha
Sent from my GT-S5360 using XDA

odin
U shud be gud with odin... The above steps do work... I was stuck up wid same problem when i flashed chibitsdigital ... Lucky my galaxy y was under warranty...... They repaired it..

Help!!!! Sprint s2 stuck at Samsung logo

Help please I tried to flash calkulins 3.0 rom on my fiances phone and now it's stuck at the Samsung logo and I can't restore my stock nandroid... this is what I did I ran calkulins format all .zip then I flashed rom, then the bare rom converter .zip then I flashed the newest modem then rebooted and now phone is stuck in Samsung boot logo.... can anyone help our have suggestions to why this is happening
Sent from my XT912 using Tapatalk 2

It would be helpful to know what rom/kernal/recovery you were running before. Have you tried using download mode?
Sent from my SPH-D710 using xda app-developers app

I was on stock rooted el.29 with the rogue recovery and stock kernel
Sent from my XT912 using Tapatalk 2

Bmali said:
I was on stock rooted el.29 with the rogue recovery and stock kernel
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
Your problem was having the stock kernal to do the flash. Best thing to do know is to flash a el26 CWM kernal using Odin and then reflashing the whole rom set up again.
Sent from my SPH-D710 using xda app-developers app

what was wrong with flashing a rom on el.29? That's the version this rom is made for
Sent from my XT912 using Tapatalk 2

Bmali said:
what was wrong with flashing a rom on el.29? That's the version this rom is made for
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
Apparently it gets you stuck at the s2 logo.
Sent from the terminus system using quantum entanglement

Bmali said:
what was wrong with flashing a rom on el.29? That's the version this rom is made for
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
After looking at your sig what kind of phone was it?
Sent from the terminus system using quantum entanglement

Sprint galaxy s2... so what you guys are saying is that I need el.26 to flash this rom? What roms are made for el.29
Sent from my XT912 using Tapatalk 2

I'd have thought you would be perfectly fine flashing from el29. So you can't get into Odin mode or CM recovery?

I thought some roms were compatible with rouge recovery only and some were only compatible with cwm recovery.?.?
Sent from the terminus system using quantum entanglement

gilbydakid said:
I thought some roms were compatible with rouge recovery only and some were only compatible with cwm recovery.?.?
So there are two different recoveries? Is clockwork the most used recovery? I odin backed to el.29 rooted does someone have a link for clockwork? Is rogue recovery not as good as clockwork
Sent from the terminus system using quantum entanglement
Click to expand...
Click to collapse
So there are two different recoveries?
Sent from my XT912 using Tapatalk 2

Bmali said:
Sprint galaxy s2... so what you guys are saying is that I need el.26 to flash this rom? What roms are made for el.29
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
I don't think it is possible to have the stock kernel and have rouge recovery. That would mean that you must of had a custom kernal which had included rouge recovery. If you mean you had stock kernel to being with you then you flashed the new rom using androids stock recovery which almost always fails when installing a new rom. The kernel I mentioned , EL26 CWM can be found here, flash it using odin and then reflash your whole rom setup. When you double click the file, it will self extract and a file should appear. That is the file you flash using odin in the PDA slot.

The file I flashed in odin was a rooted el.29 file then I used a tool that installed the el.29 rogue recovery... so I'm confused why a .29 rom won't install over a .29 base?
Sent from my XT912 using Tapatalk 2

Just put the phone back into download mode Odin el.29 rom that you can find in development section then from there just redo it.
Sent from my SPH-D710 using Tapatalk 2

I have already odin back to rooted el.29 but what I'm wondering is why would it change anything? It's already soft bricked once so how would it change this time? Should I be on .26 or .29 to flash a rom?
Sent from my XT912 using Tapatalk 2

I'm feeling dumb about all these questions... I'm new to rooting Samsung products I've had no problems with my droid x and droid razr so that's why it's getting discouraging trying to get this phone setup properly
Sent from my XT912 using Tapatalk 2

Bmali said:
So there are two different recoveries?
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
there is a rouge aka team rouge recovery and there is a regular old clock work recovery.

Bmali said:
I'm feeling dumb about all these questions... I'm new to rooting Samsung products I've had no problems with my droid x and droid razr so that's why it's getting discouraging trying to get this phone setup properly
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
OK So sounds like (not too sure though) that you used sfhub's Autoroot package to root and add EL29+CWM+Rogue is that right?
Solution to get you back to a working EL29 stock (but rooted) running phone.
Power off the phone.
Go here http://forum.xda-developers.com/showthread.php?t=1433101 download the Download the EL29 full restore One-Click self-extractor and extract the file somewhere.
[Also make sure you downloaded and installed the Samsung drivers from this post, have a GOOD USB cable and that the phone is charged at least 50%]
Then start the file you downloaded: SPH-D710.EL29_CL852097_ROOTED-OneClick.exe
The power on your phone while holding the Volume Down button till you get the confirmation screen and press volume up to accept and enter Download mode.
Connect your phone to the PC and it should show up on some COM port (doesn't matter which one) in the Odin tool.
Press start adn wait till all is done. You will then have a working stock rooted phone.
Then take some time and read through all the stickies and tutorials in this section. Read especially the 'how not to brick' ones!
This phone is very different from the HTCs and Motorolas in how the system(s) is partitioned and how the recovery works.
Then take some more time and read a little more or you will surely turn the phone into an expensive fishing lure.
If you want to flash the FF18 (actual leak build) sfhub has a one click for that too! Safest way to go. And you can use his Autoroot package to add Agat's safe ICS kernel.
Welcome to the E4GT just be careful and you'll have more fun.
By the way Qbking77's videos are SUPER if you are new to this phone!

Yes I'm on stock rooted el.29 now
Sent from my XT912 using Tapatalk 2

[Q] CWM 6.0.1.4 soft bricked phone!! Help!! please

Here goes...
I updated to 6.0.1.4 and tried flashing CM October 10th nightly. I used darkside superwipe and darkside cache wipe then flashed the rom and rebooted. The phone got stuck in a boot loop so i let it set for about 15 minutes. After, I pulled the battery and booted into recovery. I attempted to flash again but the damn thing would simply freeze right at the start of the flash. Also, whenever I tried going "back" nothing would happen, just a blank screen with the CWM background. I'm at a complete loss at what to do. Any help would be amazing

Do not use dark side wipes on the new cwm6. they are outdated and not needed .
Sent from my SGH-T989 using Xparent SkyBlue Tapatalk 2

jlg19753 said:
Do not use dark side wipes on the new cwm6. they are outdated and not needed .
Sent from my SGH-T989 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
I know :/ too late though... What can I do to fix this???

Can u get it in download mode?
Sent from my SGH-T989 using Xparent SkyBlue Tapatalk 2

jlg19753 said:
Can u get it in download mode?
Sent from my SGH-T989 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Yeah but I can't flash anything at all, it stalls

http://forum.xda-developers.com/showthread.php?t=1513359
[HOWTO]Restore to Stock/Recover from a Bad Flash .
Sent from my SGH-T989 using Xparent SkyBlue Tapatalk 2

Goofy317 said:
Yeah but I can't flash anything at all, it stalls
Click to expand...
Click to collapse
It happened to me before. This is what I did to restore the recovery.
1. Download cwm 5.0.2.7
2. Go to download mode. Connect usb to computer then plug into phone while holding volume buttons.
3. Use Odin 1.8.5 and flash the cwm file.
4. When you get your recovery back, restore rom from backup.
5. Upgrade to twrp for more stable flashing experience.
Sent from my SGH-T989 using xda app-developers app

meh same thing happened
refer to fe1ixs's post but if u need to recover files like i did...when u reboot back to recovery 5.0.2.7, darkside cache wipe and then u should be able to boot to your homescreen, install goomanager, menu>install openrecoveryscript........
i pretty sure the reason for this bootloop is because ur not suppose to use darkside anything in 6.0.1.4.....cause they already fixed the wipe...but i recommend twrp for maximum stability

TWRP Recovery help???

Can someone offer a how to flash instructions I'm using aosp jellybean and after I flash the zip it won't boot but will let me back in the previous recovery thanks
Sent from my SPH-D710 using Tapatalk 2

Twrp recovery help?????

Do you flash the twrp file right after you flash the cm10.1 rom or do you let it boot first then flash it after first boot
Sent from my SPH-D710 using Tapatalk 2

dank.daniel25 said:
Do you flash the twrp file right after you flash the cm10.1 rom or do you let it boot first then flash it after first boot
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
You should always let a ROM "settle" before flashing any custom recovery, mods, tweaks, etc. So yes, let it boot fully before flashing your custom kernel.
Sent from my SPH-D710BST using xda premium