Related
i am planning on getting rid of my W8 & buying a Arc S....but i am a bit stumped by a couple of things. i like modding my phones....my W8 was pretty modded out...i didnt unlock the bootloader & ran stock kernel but i could still flash custom roms. can i still do that with the arc s? i mean do i have to unlock bootloader in order to install any custom roms?? & are the steps to rooting an arc the same as rooting an arc s?? any help would be appreciated....
arc S can be rooted with zergrush method very easy...
on locked booltoader so far can instal only 2 custom rom based on stock firmware...
also theme, mods can be instaled with CWM on locked BL..
Which two roms are you talking about? Can I flash even with cwm recovery 5.0.2.7 nAa r2? (the one with thd auto_installer in themes and apps category) thanks for you attention!
Sent from my Arc S LT18i using Xda Premium App
Xperia MOD is first one, i cant remember which is second one sry :/
electrash said:
arc S can be rooted with zergrush method very easy...
on locked booltoader so far can instal only 2 custom rom based on stock firmware...
also theme, mods can be instaled with CWM on locked BL..
Click to expand...
Click to collapse
i hate to b a bother...but cud u giv the link to the root page & to install CWM....i was wondering....can xrecovery be installed instead of CWM?? if possible, could u giv me a link of that as well?? thanks in advance.....much appreciated for your info.....the thing is the mods & tutorials for the W8 was very easy to find in xda but for some reason that is very hard for arc s.....i dunno mayb its my fault coz i dont knw wht um luking for
linx1287 said:
i hate to b a bother...but cud u giv the link to the root page & to install CWM....i was wondering....can xrecovery be installed instead of CWM?? if possible, could u giv me a link of that as well?? thanks in advance.....much appreciated for your info.....the thing is the mods & tutorials for the W8 was very easy to find in xda but for some reason that is very hard for arc s.....i dunno mayb its my fault coz i dont knw wht um luking for
Click to expand...
Click to collapse
here is the link for the root page: http://forum.xda-developers.com/showthread.php?t=1320350
but remember it doesn't support the latest build: 4.0.2.A.0.62
As for installing custom roms ...etc
check this link it will help you: http://forum.xda-developers.com/showthread.php?t=1304634
Enjoy
For CWM recovery
http://forum.xda-developers.com/showthread.php?t=1410746
Se twaker is best one, i used it and work great...
Connect your phone normal to PC, selec option from dropdown menu, click instal and VOILA...you got CWM...
also CWM is beater than xrecovery..why would you use that?
uh....i tried to flash the xperia mod & now my phone is stuck on se logo.....any tips please?? um freaking out....did i brick it or what?? how do i fix it?
i cant even accesss CWM
flash it with flashtool some official firmware...
how cant you enter CWM?
linx1287 said:
uh....i tried to flash the xperia mod & now my phone is stuck on se logo.....any tips please?? um freaking out....did i brick it or what?? how do i fix it?
i cant even accesss CWM
Click to expand...
Click to collapse
Just fix it by running Sony Ericsson Service Update tools.. It will get you back to stock firmware..
DeepUnknown said:
here is the link for the root page: http://forum.xda-developers.com/showthread.php?t=1320350
but remember it doesn't support the latest build: 4.0.2.A.0.62
As for installing custom roms ...etc
check this link it will help you: http://forum.xda-developers.com/showthread.php?t=1304634
Enjoy
Click to expand...
Click to collapse
electrash said:
flash it with flashtool some official firmware...
how cant you enter CWM?
Click to expand...
Click to collapse
phone boots to SE logo & just stuck there....i pressed the back arrow repeatedly....but it doesnt go to CWM. i downloaded this firmware since it says its stock http://forum.xda-developers.com/showthread.php?t=1435541 which version of flashtools do you recommend?? can u giv me a link?? thanks man
laziepig said:
Just fix it by running Sony Ericsson Service Update tools.. It will get you back to stock firmware..
Click to expand...
Click to collapse
i hate to sound stupid but how do u do that?? do u mean by pc companion's update phone option?? i tried that but everytym i connect the phone it wants me to do sumthng with the phone...slide sumthng down to confirm....but the problem is....my phone is stuck on the se logo....so i cant do anything....so i cant even update it....or mayb i m doing sumthng wrong.....please please guyz help me out here.....um freaking out.....i just bought the arc s not a couple of hours ago
could u guyz please give me the links for some stock firmwares & flashtool?? thanks
when i connect my phone to flashtools....it says detected device with usb debugging off.....& the next line saysfor 2011 devices turn mtp off or something...what do i do?
Wooohoooo my arc s is alive again!!! Thank you guys for all your infos....i wud hv died if it werent for you guyz....i decided i m not gonna do these custom roms for arc just yet.....not until it becomes as safe to flash as w8 was!!
Hi guys
i wanna make a simple question and i hope i can get the reply i want
basically i was planning to ask if there is an easy way to root my phone and i had found it on this section so i cover up my 1st question
the second think i want to ask is that since i am planning to root my phone and start playing around with roms and apps i would like to ask before i go ahead and root the phone how can i backup the original firmware of the phone so if in case i screw it up at list i will be able to go back to the original state by flashing the original image of the phone. the reason i am asking that is because i had destroy my new Atrix 2 and till now i haven't manage to get the Asia Pacific version so i was forced to install an ATT version and sale the phone half price instead keeping it and just looking at it, so this time i want to follow the safe side
the details of the phone is as follow and i just bought it today morning
Model: LT18i
Version:2.3.4
kernel: 2.6.32.9
Build: 4.0.2.A.0.62
i will deeply appreciate any response and advise from you guys
George
Greeco said:
Hi guys
i wanna make a simple question and i hope i can get the reply i want
basically i was planning to ask if there is an easy way to root my phone and i had found it on this section so i cover up my 1st question
the second think i want to ask is that since i am planning to root my phone and start playing around with roms and apps i would like to ask before i go ahead and root the phone how can i backup the original firmware of the phone so if in case i screw it up at list i will be able to go back to the original state by flashing the original image of the phone. the reason i am asking that is because i had destroy my new Atrix 2 and till now i haven't manage to get the Asia Pacific version so i was forced to install an ATT version and sale the phone half price instead keeping it and just looking at it, so this time i want to follow the safe side
the details of the phone is as follow and i just bought it today morning
Model: LT18i
Version:2.3.4
kernel: 2.6.32.9
Build: 4.0.2.A.0.62
i will deeply appreciate any response and advise from you guys
George
Click to expand...
Click to collapse
Don't think there's rooting kit for your build yet..
if you happen to root it, download SE Extreme Tweak Installer.. this will install CWM Recovery where you can backup and restore your firmware before bootup.
Then you can start messing around.
laziepig said:
Don't think there's rooting kit for your build yet..
if you happen to root it, download SE Extreme Tweak Installer.. this will install CWM Recovery where you can backup and restore your firmware before bootup.
Then you can start messing around.
Click to expand...
Click to collapse
Can you tell me from where i can download that because i had found this which is mentioning that is working for my version http://forum.xda-developers.com/showthread.php?t=1320350
please also explain if i can use the back up to reflash my phone in its original state at any time i wish and how through the phone or by any third party application like Odin i.e. and where can i locate the back up file inside the phone or SD memory
i am owner of S2 and i am doing pretty well but with Arc s i am just noob
yea...i did the same too....rooted it installed CWM & backed up my rom & tried to flash a custom rom that didnt require bootloader unlocking or custom kernel.....i managed to do sumthng do the phone...it got stuck at the se logo...it wudnt even go to CWM....later the guys here advised me to use flashtool to reflash a stock firmware...& i did & with my fingers crossed...did so & got my arc s back alive.....after this episode...i lost the nerve to flash custom roms in my arc s......& i have been flashing custom roms in my w8 & this never happened.....this shows that the arc s development area is still not ironclad yet
btw...i do have a question.....i am a bit confused by the system info from antutu benchmark....the original stated RAM for the arc s is 512MB. but in antutu benchmark shows total RAM as 335MB.....i dont get it.....can anyone else confirm this??
Sorry, I know this is the arc forum, but as there is no mk16 forum, I saw that usually people post pro development's in arc's forums.
I bought an used mk16 with the 4.0.1.a.0.283 firm, and the bootloader unlockable as explained in this link the SE website.
I installed Android SDK, JDK, PC companion, etc. I was unable to install the fastboot drivers until I found someones in SE website and now it seems to be OK (blue light if I connect the phone (turned off) to the computer while holding menu key)
After that, I configured my phone to enable USB debugging. Then I installed flashtool, and I tried to root the phone with it. It worked! (I didn't expect it to work, because I saw a few post with scripts, etc. to root the phone...)
So...
- Now I am with that firmware, rooted. Wich rootable firmware do you recommend me to flash to my phone? I always loved cyanogenmod, but I don't know if there is problems with the freexperia releases (like bad quality in camera picture, low volume, etc.)
- What is the baseband? I have one ending in 49.
- What are the requirements to install clockworkmod recovery? I love this recovery to do my nand backups, etc. Do i need to unlock bootloader to this? Is there any chance to lock again the bootloader? You know, for warranty things.
- Do you have ny list of what apks are secure to erase from /system/app? For example, I don need the moxier pro, let's golf, etc.
I suppose that those questions have been answered before, but without the mk16 forum, searching that info is quite impossible...
Thanks in advance.
Search keywords: mk16 mk16i bootloader flashtool wotan
khodos said:
Sorry, I know this is the arc forum, but as there is no mk16 forum, I saw that usually people post pro development's in arc's forums.
I bought an used mk16 with the 4.0.1.a.0.283 firm, and the bootloader unlockable as explained in this link the SE website.
I installed Android SDK, JDK, PC companion, etc. I was unable to install the fastboot drivers until I found someones in SE website and now it seems to be OK (blue light if I connect the phone (turned off) to the computer while holding menu key)
After that, I configured my phone to enable USB debugging. Then I installed flashtool, and I tried to root the phone with it. It worked! (I didn't expect it to work, because I saw a few post with scripts, etc. to root the phone...)
So...
- Now I am with that firmware, rooted. Wich rootable firmware do you recommend me to flash to my phone? I always loved cyanogenmod, but I don't know if there is problems with the freexperia releases (like bad quality in camera picture, low volume, etc.)
- What is the baseband? I have one ending in 49.
- What are the requirements to install clockworkmod recovery? I love this recovery to do my nand backups, etc. Do i need to unlock bootloader to this? Is there any chance to lock again the bootloader? You know, for warranty things.
- Do you have ny list of what apks are secure to erase from /system/app? For example, I don need the moxier pro, let's golf, etc.
I suppose that those questions have been answered before, but without the mk16 forum, searching that info is quite impossible...
Thanks in advance.
Click to expand...
Click to collapse
Xperia Pro has a very few roms for now.The famous CM7 & CM9 are available for Xperia Pro.I guess,MIUI is also available(not sure).But,You must unlock your bootloader in order to install these roms.Rooted phone is not enough to install these roms.Atleast not yet. And rest assured,there is not drawback regarding camera and volume.Different users have different taste,many like it and many dont.But the fact is they are closely equal.
Basebands are well explained by a XDA member in the following post,please do take a look at it
http://forum.xda-developers.com/showthread.php?t=1462360
For CWM, you only need a rooted phone.And the easiest way to install CWM on locked-bootloader Xperia 2011 device is by using this beautiful app from the following link.Go check it out
http://forum.xda-developers.com/showthread.php?t=1437840
For relocking bootloader,i haven't come across any thread which claims to relock Xperia Pro's bootloader.But yes,relocking Xperia Arc's bootloader is poosible.You can give it a try but I'm not sure if it would work on Xperia Pro or not.Here is the link:
http://forum.xda-developers.com/showthread.php?t=1134335&highlight=relock
Here again,we have a the list of system apks with their descriptions for Xperia Arc's firmware.I assume that the Xperia Pro Has Almost the same System Apks with it so the list for Xperia Arc would also imply for Xperia Pro as well.Here is the link:
http://forum.xda-developers.com/showthread.php?t=1089470
PS: Welcome To XDA
Thank you very much for all that information and the wellcome.
I can execute commands like "fastboot.exe -i 0x0fce getvar version" or "fastboot.exe devices" while in fastboot mode, so I assume that's OK.
But in the SE website they are very insistent about voiding warranty depending of blablabla. My phone is an unlocked (SIM free) from fabric one. I understand it will void the warranty if the phone would be form Vodafone (for example), but not mine... Do you know anything about this?
Do you recommend me any official rom? maybe the .42 one?
Now I have clear everything about the baseband, thanks.
That CWM apps you linked say to me (downloades form market) that MK16i is not supported by the app
I will take a look at that APK list, but first I want to be able do a NAND backup before starting to remove apks
Thanks again.
khodos said:
Thank you very much for all that information and the wellcome.
I can execute commands like "fastboot.exe -i 0x0fce getvar version" or "fastboot.exe devices" while in fastboot mode, so I assume that's OK.
But in the SE website they are very insistent about voiding warranty depending of blablabla. My phone is an unlocked (SIM free) from fabric one. I understand it will void the warranty if the phone would be form Vodafone (for example), but not mine... Do you know anything about this?
Do you recommend me any official rom? maybe the .42 one?
Now I have clear everything about the baseband, thanks.
That CWM apps you linked say to me (downloades form market) that MK16i is not supported by the app
I will take a look at that APK list, but first I want to be able do a NAND backup before starting to remove apks
Thanks again.
Click to expand...
Click to collapse
See, Unlocked phone means the phone is SIM free,i.e you can use any carrier SIM in your phone.But, Unlocked-Bootloader is a different thing.When you unlock bootloader,then you are free to flash any ROM which is compatible with your phone.Unlocking Bootloader voids warranty and that is what the SE website is trying to say.
I would recommend you to update your phone to the official .42 fimware version because it has many new features when compared to .283 ROM.Use SE update service or PC Companion for updating your phone.
And about cwm..try this...
http://forum.xda-developers.com/showthread.php?t=1302037&highlight=cwm
Thx again
I know the diff between sim locked and bootloader looked. It's just that I don't understand why they let you unlock the bootloader, but don't keep the warranty...
I have unlocked the bootloader right now. Didn't know that it wipes all your configuration, apps, etc! At least, it's still rooted.
I have installed that CWM, and booted to it, but now I don't know what combination do I have to press to boot again into CWM XD Maybe is an image to boot just one time?
And about the ROM you recommend, PC Companion offers me the .62, not the .42. SE Update Service tells me that I have modified software (because of the rooting, I suppose) so it can't update my phone. Any idea?
Thanks again
khodos said:
Thx again
I know the diff between sim locked and bootloader looked. It's just that I don't understand why they let you unlock the bootloader, but don't keep the warranty...
I have unlocked the bootloader right now. Didn't know that it wipes all your configuration, apps, etc! At least, it's still rooted.
And about the ROM you recommend, PC Companion offers me the .62, not the .42. SE Update Service tells me that I have modified software (because of the rooting, I suppose) so it can't update my phone. Any idea?
Thanks again
Click to expand...
Click to collapse
Now that you have unlocked-bootloader, then you must not use SE update service,niether PC Companion Update nor SE OTA updates !! If you do,then it will brick your phone.
The other option you have is to flash a firmware.For more details follow this link http://www.wotanserver.com/en/sony-ericsson/se/xperia-pro-mk16/unlock-tool/debranding-flash
Thx!
I edited my previous post with this:
I have installed that CWM, and booted to it, but now I don't know what combination do I have to press to boot again into CWM XD Taking a look at the commands executed in the bat, maybe is an image to boot just one time?
Thanks about the wotan link. Really easy to flash. Now I'm in .42. Do you know where can I find the firmware changelogs?
I'll take a second look to flashtool, because I'm going to need it to flash the CM 7.2 and the baseband...
Thanks again.
khodos said:
Thx!
I edited my previous post with this:
I have installed that CWM, and booted to it, but now I don't know what combination do I have to press to boot again into CWM XD Taking a look at the commands executed in the bat, maybe is an image to boot just one time?
Thanks about the wotan link. Really easy to flash. Now I'm in .42. Do you know where can I find the firmware changelogs?
I'll take a second look to flashtool, because I'm going to need it to flash the CM 7.2 and the baseband...
Thanks again.
Click to expand...
Click to collapse
Search in this forum and you can find the changelog
Have fun.
Sent from my LT18i using XDA
QUESTION
AFTER OPENING THE BOOTLOADER
I CAN FLASH THE ROM AN OFFICIAL FTF?
PANCHOMATASANO said:
AFTER OPENING THE BOOTLOADER
I CAN FLASH THE ROM AN OFFICIAL FTF?
Click to expand...
Click to collapse
Yea sure..
---------- Post added at 01:06 PM ---------- Previous post was at 12:58 PM ----------
khodos said:
Thx!
I edited my previous post with this:
I have installed that CWM, and booted to it, but now I don't know what combination do I have to press to boot again into CWM XD Taking a look at the commands executed in the bat, maybe is an image to boot just one time?
Thanks about the wotan link. Really easy to flash. Now I'm in .42. Do you know where can I find the firmware changelogs?
I'll take a second look to flashtool, because I'm going to need it to flash the CM 7.2 and the baseband...
Thanks again.
Click to expand...
Click to collapse
Well if u wan a permantent CWM based recovery and u r using any stock or stock based ROM use this kernel.. flash it using fastboot..
http://www.mediafire.com/?m4f43973m3vxybs
PANCHOMATASANO said:
AFTER OPENING THE BOOTLOADER
I CAN FLASH THE ROM AN OFFICIAL FTF?
Click to expand...
Click to collapse
If you just need to flash an official firmware, then there is no need to unlock the bootloader. I was advised not to unlock it when not necessary (for example to flash the phone with some custom ROM like CM). Because with locked bootloader you should not be able to brick the phone and you could be always able to save the situation using Sony PC Companion.
So if you need to flash an official firmware, you can do it without any unlocking via Wotanserver. The firmware flashing is free, just register there. The flashing is very easy - there is a graphic wizard which tells you what to do.
EDIT: Ooops, flashing FW using Wotanserver is no longer free - costs 2 EUR now. Few weeks ago I flashed my phone there for free...
hi there i am using xperia play r800i...first i flashed gin2jellybean rom and it was fine....after 3weeks i tried to flash my stock rom but my phone is not responding anymore after this.....it shows only the logo and that's it...my pc don't recognize my phone cuz only is rebooting automatically,my led light doesn't show neither green ,red or blue colour....i am new in android world and i'm afraid that my phone is dead (( please helppp!!!!if u know how to fix this problem.....PS:sorry for my bad english
Is your bootloader unlocked? Need more info.
Sent from my R800i using Tapatalk 2
chery2k said:
Is your bootloader unlocked? Need more info.
Sent from my R800i using Tapatalk 2
Click to expand...
Click to collapse
no man i didn't unlock the bootloader,i can't do it with flashtool
Sony now has the ability to give out unlock codes for the Play, if my memory serves. You may want to try it. It will break any warranty you have, so be aware of that.
Sent from my SCH-I535 using Tapatalk 2
If you didnt unlock your bootloader before installing a custom rom. Idk how else to help you. You might have to send off your xperia play to Sony.
brainard52 said:
Sony now has the ability to give out unlock codes for the Play, if my memory serves. You may want to try it. It will break any warranty you have, so be aware of that.
Sent from my SCH-I535 using Tapatalk 2[/Qid
i took the code but now i can't do anything cuz my xperia doesn't even go to recovery .....anyway thnx!!!
Click to expand...
Click to collapse
Simple fix
klaudiohavari said:
brainard52 said:
Sony now has the ability to give out unlock codes for the Play, if my memory serves. You may want to try it. It will break any warranty you have, so be aware of that.
Sent from my SCH-I535 using Tapatalk 2[/Qid
i took the code but now i can't do anything cuz my xperia doesn't even go to recovery .....anyway thnx!!!
Click to expand...
Click to collapse
No phone is bricked!!!! hardware does not boot with out software. there was a way they put it in so im going to help you fix it!!!
i have bricked my phone several times and im a pro at fixing them too! lol
question one does your phone turn on?
If it does what does it do?
do you have ANdroxide Flash tool?
Click to expand...
Click to collapse
Yes use his flashtool. But the real question can you use it if your bootloader is locked.
works on both
If a boot loader is locked it means its intact hense the word locked. So the phone boots so all you have to do is..
Download your stock ftf file for you phone.
Hold the back button when you connect your phone and flash your firmware back. Light should turn green.
If it don't hold the power button while you connect it Sonay used this method to put it in the first time.i
Rmontoya83 said:
If a boot loader is locked it means its intact hense the word locked. So the phone boots so all you have to do is..
Download your stock ftf file for you phone.
Hold the back button when you connect your phone and flash your firmware back. Light should turn green.
If it don't hold the power button while you connect it Sonay used this method to put it in the first time.i
Click to expand...
Click to collapse
i solved the problem opening fastboot and i pressed search button for 5minutes and the light blue blinked ...i flashed the stock rom with flashtool now it's like new ,,,,,,thank ya all for ur answers ,u are the best
Bricked phone
Rmontoya83 said:
klaudiohavari said:
No phone is bricked!!!! hardware does not boot with out software. there was a way they put it in so im going to help you fix it!!!
i have bricked my phone several times and im a pro at fixing them too! lol
question one does your phone turn on?
If it does what does it do?
do you have ANdroxide Flash tool?
Click to expand...
Click to collapse
Hi
I was hoping you could help me. I rooted my play and was following a youtube video as descibed. I couldn't attach the link because I am a new member. It was the new ics 4.0.4 from the android doctor - 100% bug free gaming rom. I had difficulty in flash tools when i needed to go into fastboot mode to install the Lupus kernel. So I installed the cwm mode from the internet and tried to install the ics from its recovery mode. Now I just get the sony logo, then the screen goes black. It is still on. I have reinstalled flashtools and have seen some stock roms on this site to download. The problem I have is when I select the rom to flash, whilst it recognises that my phone is in flash mode, I get a error flash cancelled. I have tried 3 different stock roms. I am in the process of downloading Emma - a flashtool from Sony. Hopefully my phone is not screwed. It was on 2.3.4. One week old unlocked rx800i. Any help would be appreciated.
Thanks..
Tommy
Click to expand...
Click to collapse
You guys remember about 2011 June, a problem came up with unlocked bootloader and OTA update. the first fix that came out broke the radio rom or something so your phone won't accept any sim but will boot and be like a psp or media player. well. that happened to me. and 2 years down the line, i'm still with my play hoping someone could come up with a solution for that.
boots up fine. plays games and audio video no probs but still can't accept any sim in it.
Specs are as follows
model R800i
android version 2.3.4
baseband number 8x55A-AAABQMAZM-203028D-56
Kernel Version 2.6.32.9-perf
[email protected] #1
Build Number 4.0.2.A.0.42
Hey guys!, I need some help over here, i have read many post like mine, but i cant find a solution, i have rooted my phone succesfuly now i want to update the kernel and install a custom rom, but im stuck in the fastboot command window it says "waiting for device", here are some pics, to explain it better, drivers seems to be fine, i tryed diferent usb port, im runinig W7... please help.
PsychopathMx said:
Hey guys!, I need some help over here, i have read many post like mine, but i cant find a solution, i have rooted my phone succesfuly now i want to update the kernel and install a custom rom, but im stuck in the fastboot command window it says "waiting for device", here are some pics, to explain it better, drivers seems to be fine, i tryed diferent usb port, im runinig W7... please help.
Click to expand...
Click to collapse
Do you have R800a model? Did you unlocked your bootloader with testpoint?
Also, try back usb port on your motherboard, not front ones
Thanks for your reply, Yes it is a R800a, i used DooMLoRD_v4_ROOT-zergRush-busybox-su, to unlock the phone,
i have tried back usb ports too, and well my pc does detect the device even if it is in recovery, but fastboot doesnt.
Bakisha said:
Do you have R800a model? Did you unlocked your bootloader with testpoint?
Also, try back usb port on your motherboard, not front ones
Click to expand...
Click to collapse
PsychopathMx said:
Thanks for your reply, Yes it is a R800a, i used DooMLoRD_v4_ROOT-zergRush-busybox-su, to unlock the phone,
i have tried back usb ports too, and well my pc does detect the device even if it is in recovery, but fastboot doesnt.
Click to expand...
Click to collapse
ZergRush method is just for rooting, not for "unlocking phone". Rooting is just a way to grant you root user right on your phone (and you can do it on locked bootloader, wich you obviously did). To be able to install custom kernel, you must first unlock bootloader
I don't have R800a model, so i can't help you much, but you can help yourself by reading sticky threads in "general" and "Q&A" sections to inform yourself about your phone, because R800a model is little specific (it doesn't have fastboot access, kernels can be flashed only in flash mode, and only when bootloader is unlocked via testpoint method)
Hey thanks, i didnt knew that, and well it seems that my phone is now unlocked i used wotanserver (pics below 7.99 UE not bad), i still dont have access to fastboot as you mention, now i download flashtool, and well, i am stuck what i have to do now? i have the kernel, the room, i dont know if im missing something.
Bakisha said:
ZergRush method is just for rooting, not for "unlocking phone". Rooting is just a way to grant you root user right on your phone (and you can do it on locked bootloader, wich you obviously did). To be able to install custom kernel, you must first unlock bootloader
I don't have R800a model, so i can't help you much, but you can help yourself by reading sticky threads in "general" and "Q&A" sections to inform yourself about your phone, because R800a model is little specific (it doesn't have fastboot access, kernels can be flashed only in flash mode, and only when bootloader is unlocked via testpoint method)
Click to expand...
Click to collapse
PsychopathMx said:
Hey thanks, i didnt knew that, and well it seems that my phone is now unlocked i used wotanserver (pics below 7.99 UE not bad), i still dont have access to fastboot as you mention, now i download flashtool, and well, i am stuck what i have to do now? i have the kernel, the room, i dont know if im missing something.
Click to expand...
Click to collapse
You don't have fastboot, but you can stll flash kernel with flashtool in flasmode connected (back button pressed while plugging i phone)
There is thread for kernels in ftf format at http://forum.xda-developers.com/showthread.php?t=2350707 that korrectmethod made for guys like you.
Thank you so much Bakisha, i finally install both kernel and rom (Doomlord V14 and AtoMic GB 7.0), it is working like a charm! my only issue is that now, when i pull the game pad, it doenst display the games to select the one i want to play, i mean the dashboard, do i need an app? anyways it looks and feel great, i was about to giving up but it worked at the end, overclock works great at 1.2 Ghz.
and well thx again!.
Bakisha said:
You don't have fastboot, but you can stll flash kernel with flashtool in flasmode connected (back button pressed while plugging i phone)
There is thread for kernels in ftf format at http://forum.xda-developers.com/showthread.php?t=2350707 that korrectmethod made for guys like you.
Click to expand...
Click to collapse
PsychopathMx said:
Thank you so much Bakisha, i finally install both kernel and rom (Doomlord V14 and AtoMic GB 7.0), it is working like a charm! my only issue is that now, when i pull the game pad, it doenst display the games to select the one i want to play, i mean the dashboard, do i need an app? anyways it looks and feel great, i was about to giving up but it worked at the end, overclock works great at 1.2 Ghz.
and well thx again!.
Click to expand...
Click to collapse
just download xperia play launcher from market
YW
Hi guys i am new to all this rooting stuff but from what i hear it seems the way to go, does anyone have a decent guide i could check with links to stuff i need for rooting this phone? Its on the recent android build 14.4.A.0.157 kitkat 4.4.4, I have seen a few forums about rooting but they mainly seem to be for the old android build .108.
Any help appreciated. Thanks!
This sticky at the top of the general section should help
http://forum.xda-developers.com/showthread.php?p=49928704
raverbhoy said:
Hi guys i am new to all this rooting stuff but from what i hear it seems the way to go, does anyone have a decent guide i could check with links to stuff i need for rooting this phone? Its on the recent android build 14.4.A.0.157 kitkat 4.4.4, I have seen a few forums about rooting but they mainly seem to be for the old android build .108.
Any help appreciated. Thanks!
Click to expand...
Click to collapse
HERE is the easiest way to root latest firmware.
Hey there, I could use some help with this whole root thing as well...
My Z1C is still on .108, but now all the tutorials seem to be for .157 and include flashing with a .108 stock rom???
So do I have to update my Xperia first, then flash it with an older version, root it and flash it with .157???
Some tutorials seem to be removed since they "don't work with the latest firmware anymore"...
Also how do I backup my phone before I root it?
Thanks.
I hope this helps...
Havoc1337 said:
Hey there, I could use some help with this whole root thing as well...
My Z1C is still on .108, but now all the tutorials seem to be for .157 and include flashing with a .108 stock rom???
So do I have to update my Xperia first, then flash it with an older version, root it and flash it with .157???
Some tutorials seem to be removed since they "don't work with the latest firmware anymore"...
Also how do I backup my phone before I root it?
Thanks.
Click to expand...
Click to collapse
Well let me help you both with this, since I have spent around three days wasting my time figuring out how to root the Z1C which appeared later on that I have downloaded the wrong files because the thread it self was providing the kernels for Z1 and not the Z1C. So this is what I did:
It is ok to update your phone to .157 so go on with it, when done make sure your phone isn't connected and is switched off.
1- Download Flash tool from http://www.flashtool.net/downloads.php. After it downloads install it and JUST IN CASE you haven't installed the Z1C drivers go to Your C: drive and click the Flashtool folder then go to Flash tool drivers and you will find the Flashtool drivers installer. Click and install USB drivers and Fastboot drivers, scroll down and select Z1 compact drivers too.
2- Download the two required Z1C kernels and the RootTool as well from http://d-h.st/M9a make sure you Click the DOWNLOAD NOW button not the upper DOWNLOAD button because it is just a useless malware!
then place the two .ftf files in c:/flashtool/firmwares folder. Make sure you place the two '.ftf' files that are in the .zip in the firmware folders you can download them from the attachment too below.
3- Open the flash tool, Click on the flash button (top left) and choose the Flashtool method where you will find the two kernel files you placed in Firmwares folder.
4- Click once on the .108 Kernel and click flash, AFTER THAT press the volume down button on your phone while it is switched off and connect it to USB and wait for the Flash to start and end, it will take several seconds.
5- once it is done disconnect your phone and restart it by simply switching it on.
6- Unzip and place the rootkitXperia_20140719 folder better on your C: Drive. Connect your phone and run the tool by double clicking Install. bat (it might show only install as a name) and keep watching your phone screen to approve. Wait for it to be done and then restart your phone, then switch it off.
7- Follow the same method above to install the .157 Kernel again to your phone and you're done!
PM me if you needed anymore help. Sorry if my guidance is complicated a little bit, just let me know.
All the best!
Thanks for the help. I did however just root my .108 now because I really, really didn't want to unlock my bootloader and flash the kernel.
Havoc1337 said:
Thanks for the help. I did however just root my .108 now because I really, really didn't want to unlock my bootloader and flash the kernel.
Click to expand...
Click to collapse
You don't need to unlock your bootloader to flash kernels or root.157
spudata said:
You don't need to unlock your bootloader to flash kernels or root.157
Click to expand...
Click to collapse
Really? Damn, must have misunderstood some of the guides. Thanks for the hint.
It's just a load of information at once, and this is my first Smartphone, so I didn't want to go overboard.
Is the .157 update even relevant in any way? And now that my phone is rooted, can't I just flash .157?
I think if you flash .157 you will lose root and will have to reroot by the method I mentioned.
I have D5503 with .157 Will I loose data using this method? If yes, is there a method to root the phone and save all data (including game saves, settings and everythink)?
Azuritko said:
I have D5503 with .157 Will I loose data using this method? If yes, is there a method to root the phone and save all data (including game saves, settings and everythink)?
Click to expand...
Click to collapse
No, not if you flash 108 kernel, root then flash 157 kernel back with flashtool.
When I run rootkit, it says "Waiting for device". Mobile is connected with PC companion. I have tried to install drivers, tried to change phone connect mode.... Do not know what is a problem. I do not have SD card in my device.
OK passed the "Waiting for device". Now stuck on "daemon started successfully"
So problem solved. The only problem was that the phone has hidden developer options where is USB debbuging. There is a little trick to open developer options so I have enabled USB debugging and than root works.
successfully rooted xperia z1 d5503 4.4.4
@emiratesson thanks i followed the instructions that you gave. At first im having a problem in flashing the 108 because my pc companion is ON im getting errors. I noticed that even though i flash 108 i still have firmware 157 because my current FW is 157 no changes and i tried to root it using rootkitXperia_20140719 still in 157 and a SuperSU app was created in my phone i guess that is the root app.
Current Build: xperia z1 d5503 4.4.4 firmware 157.