Related
Hey everyone. I know there are already a few threads with boot loop animations, and am having difficulties finding the same situation as what I'm going through. Here is what the phone used to have before it randomly started looping:
Rooted - with Stock rom, using ClockwordMod Recovery 5.5.0.2
Used Go Launcher Theme ( if that even matters )
No additional roms installed or anything, the phone is 3 months old.
Ok here is where I'm stuck. I understand I should reflash somethings like recovery image or something, but I'm stuck with one big problem. My computer and phone don't recognize using the USB mount.
The message I get is called "Unable to open lunfile ( no such file or directory)
Here's what screens I can get to:
1. Hold vol up/down while holding power ( the little android with its belly open, and the options Start - Restart Bootloader - Recovery mode - Power Off )
2. Hold vol down - ODIN mode, with the START option only
I can access WMD recovery and factory reset, Try to install my old backup, nothing works at all in that area, no matter what I do.
Can someone advise me a step by step way of getting my computer to recognize my phone, so that I am able to do fastboot, or reflash, or anything to get my phone working again. I can't access my internal memory at all.
It's even possible that I've read too much, and my frustration is getting in the way, if so I apologize! Some guidance would be greatly appreciated!
Thanks in advance of course! I need my phone for business!
Cheers,
Install the drivers on a computer then use fastboot oem unlock. Or just factory reset it from within recovery.
Sent from my Galaxy Nexus using Tapatalk 2 Beta-4
Try my siggy.
I'm not sure about the exact error:
But the link there will get you the correct drivers.
Also, as stated...try to factory reset.
You'll lose your apps/data that way though =/
Hopefully you can get the driver installed and get your computer to recognize.
If so, follow this to back up your apps:
http://forum.xda-developers.com/showthread.php?t=1420351
Have exactly the same setup as you (rooted/stock/CWM) and had the animation bootloop - animation would just loop until a battery pull.
Only thing that solved it was a factory reset from recovery. Been working fine for the 4 weeks since. No need for any reflashing etc. Titanium recoveries have all worked fine as well. Didn't try my Nandroid backup as I thought that may still have the 'fault' built in.
I had a boot loop for every from I tried to flash...wat fixed it was before flashing u need to wipe system data and wipe the cache in the recovery...ie a clean install...then every rom I tried worked...so I think ur missing that crucial step coz it worked for me
Sent from my Galaxy Nexus using Tapatalk
Hey guys, as stated above I've done numerous factory resets, it still seems to boot. I will for sure try to get the drivers installed so my phone is recongised by the computer, but would need step-by-step assistance when doing fastboot, or whatever the next step is.
Looking for more help though! Keep em coming!
?
Any other ideas?
Thanks!
Ok guys, so here's where I'm at now. I've used Jubakuba's sticky link, located here:
http://forum.xda-developers.com/showthread.php?t=1529058
Everything is able to be recognized up to the point where it says "Put the su.zip on your phone."
Since I cannot access my phone contents, since I keep getting this "Unable to open lunfile ( no such file or directory), it does not allow me to add anything to my phone.
I re-installed CWD as stated in the list of things to do, and all that went well. But I have the same issue, I tried factory resetting all that. erase cache, and still stuck with the same issue.
What's my next step now peeps? Looking for a quick answer as I have time to do it tonight!
Edit***
Just tried this trick: but it says it does not recognize the device?? what is going on! Please help someone! Thanks!
Panic Section! (Something is Wrong)
Q: My phone won't boot!
A: The easiest option is to get into recovery and restore a nandroid using the above guide (pull battery to put phone in an off-state if needed).
However, more advanced options are available if you don't have a nandroid available (You're naughty).
Do you have another rom .zip available on your SD card? If so, simply use the above guide for installing a rom to get you booting again.
If not, you can download one on your PC. Boot into fastboot (the green Android with open chest menu).
Move the .zip to the C:\android-sdk-windows\platform-tools folder.
Open ADB.
Change the NAMEOFZIP.zip below to the correct file name...and perform the action.
Surely your computer recognizes your phone. Otherwise how were you able to unlock the bootloader and flash the recovery?
And I've never seen that error message before. It doesn't even make any sense to me. Where are you seeing it? On your phone or on your computer? And in what context? What are you trying to do when it shows up?
If your phone isn't booting I'm not sure that you can copy any files to it yet. (Maybe you can use adb in clockworkmod? I'm not sure) What I do know you can do is flash the stock ROM and start over.
Download the image from Google here:
http://code.google.com/android/nexus/images.html
Here's a instructions for the GSM version:
http://forum.xda-developers.com/showthread.php?t=1366806
For the Verizon version, I can't find the thread at the moment but you just replace the filenames and also there's 2 radios to flash so:
fastboot flash radio *filename*
fastboot reboot-bootloader
fastboot flash radio-cmda *filename*
"Unable to open lunfile ( no such file or directory) appears on the phone, in CWD mode, when trying to attempt "mount Usb" to be able to access my internal storage .
I am attempting your thoughts right now.
I will post with results
Ok I tried to do this step. This is the outcome I received on the computer after even typing the first step:
'fastboot-windows' is not recognized as aninternal or external command, operable program or batch file.
A thing to stress, I'm not sure how to do step 1: 1) Take a Nandroid Backup if you have CWM installed.
EDIT***
GREAT NEWS!
used this setup!
http://android.modaco.com/topic/348161-01-feb-r4-superboot-rooting-the-gsm-lte-galaxy-nexus/
and it worked!
Thank you everyone! Going to play with my phone and make sure it all works!
Macinshak said:
Ok here is where I'm stuck. I understand I should reflash somethings like recovery image or something, but I'm stuck with one big problem. My computer and phone don't recognize using the USB mount.
The message I get is called "Unable to open lunfile ( no such file or directory)
Click to expand...
Click to collapse
the problem is when that happen?? when ur phone is booted and u plug the usb cable to ur pc? or when u are under recovery and want mount the usb mass storage? the second one doesn't work
Hey XDA Members
I know there has already been similar posts to mine on XDA as I've worn out the search button on google trying to find a solution to my problem, with no avail. So I thought I would leave a description of my own situation and see if a more tech-savvy individual could kindly help me out...
So yesterday I decided it would be a good idea to unlock my bootloader & root my device simply because I wanted to remove all the bloatware which HTC 'generously' crammed into the One X. Unlocking the bootloader was simple enough following the instructions provided. However, rooting my handset was not so effortless. The root was ineffective & I got stuck with yet another unwanted app called SuperSU! (An error message regarding missing binary codes appeared every time I tried to open the application) I tried uninstalling via both settings & google play before finally factory resetting my phone. None of these methods worked
At this point it suddenly dawned on me someone so unenlightened in the art of software development or anything android related shouldn't being toying with stuff he can't afford to break! But I figured it was too late to turn back now and continued in my moment of intellectual darkness...
In my bewildered state I accidentally 'wiped system' using CWM and now I have no iOS. My HTC will only boot until the 'quietly brilliant' slogan appear's & no further. When I connect my phone to my computer via USB I can not access the removable storage device, a removable disk appears but when clicked I am prompted to 'insert removable disk'. I am lead to believe from reading related threads that if I had access to my phones storage then installing a new iOS would be relatively straight forward. Also trying to mount in CWM just retrieves an error message reading 'CWM unable to open ums lunfile (no such directory exists)'. Where do I go from here?
Any help would be much appreciated :fingers-crossed:
Flash a newer recovery, try the latest Philz touch recovery then you should be able to mount sdcard and flash a rom
Hope it helps
if tthe above suggestion doesnt work, try this
http://www.hackmyandroid.com/comprehensive-guide-on-unbricking-the-htc-one-x/4216
I recommend you flash the latest TWRP recovery since it gives you access to the phones sdcard, if your staying stock/near stock OS you can check http://android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html download the Download stock odexed 4.18.401.3, and just flash it in recovery or you can download w.e custom OS you like and flash it the same
Hope it helps
Thank you both for your replies :good:
m.jordan, I tried to flash TWRP onto my device (3 different versions in fact) but once entering recovery mode I was prompted to 'swipe screen to unlock' which wasn't possible because I can only use the volume controls and the power button. After that I downloaded the latest version of CWM which enables me to both use the control buttons & touch screen. I downloaded the 'stock odexed 4.18.401.3' although I have no way of flashing on my device...
I tried the method in the link you kindly provided and followed each instruction carefully. After re-unlocking my bootloader (does it matter whether the device is locked or unlocked when mounting USB storage in recovery mode?) & flashing CWM I downloaded the odexed 4.18.401.3 extracted boot.img & flashed that too. On the website you shared it then prompted me to 'mount usb storage' & my device should now be showing as 'clockworkmod' so I would be able to place the odexed 4.18.401.3.zip into the folder and then flash my handset. Unfortunately I still have no removable disks showing on my PC
My HTC One X does not have removable storage (I suppose you already knew that) & I havn't been able to get my PC to read a removable disk since the day I wiped the system.
If only I could get my computer to show an 'adb device' I'm sure this would be so much easier! I don't suppose you would know anything about that? when I use cmd prompt 'adb device' most of the time it just returns:
adb out of date. killing...
daemon started sucessfully
list of attached devices
Nothing ever shows under attached devices
Nogotaclue, my next step it to try Philz recovery & see where that takes me, i'll let you know how that goes (Although I fear it will just have the same outcome as the rest & not be able to read an sdcard)
Thanks again
well it seems if you could follow the steps on that link, then your pc is recognizing the device so there is hope. If TWRP isnt working then cool. On either the CWM or Philz there is an option called adb sideload rom, if you can't access your SD card you can always sideload and install the rom using either One_X_All-In-One_Kit or WinDroid Universal HTC Toolkit v1.1, made them available here https://www.dropbox.com/sh/fv9fun4x2c4dk2l/AABhNHvlpPUvDXUWYK5PJNhpa?dl=0
Once in recovery I believe its under the install option, you have the option to install rom from sdcard and sideload rom, just select sideload. once thats done, open either the all in one or windroid with your device connected to your pc (i recommend the all in one), select the option to sideload, and cross your fingers that it works
ProdiJay said:
Thank you both for your replies :good:
m.jordan, I tried to flash TWRP onto my device (3 different versions in fact) but once entering recovery mode I was prompted to 'swipe screen to unlock' which wasn't possible because I can only use the volume controls and the power button. After that I downloaded the latest version of CWM which enables me to both use the control buttons & touch screen. I downloaded the 'stock odexed 4.18.401.3' although I have no way of flashing on my device...
I tried the method in the link you kindly provided and followed each instruction carefully. After re-unlocking my bootloader (does it matter whether the device is locked or unlocked when mounting USB storage in recovery mode?) & flashing CWM I downloaded the odexed 4.18.401.3 extracted boot.img & flashed that too. On the website you shared it then prompted me to 'mount usb storage' & my device should now be showing as 'clockworkmod' so I would be able to place the odexed 4.18.401.3.zip into the folder and then flash my handset. Unfortunately I still have no removable disks showing on my PC
My HTC One X does not have removable storage (I suppose you already knew that) & I havn't been able to get my PC to read a removable disk since the day I wiped the system.
If only I could get my computer to show an 'adb device' I'm sure this would be so much easier! I don't suppose you would know anything about that? when I use cmd prompt 'adb device' most of the time it just returns:
adb out of date. killing...
daemon started sucessfully
list of attached devices
Nothing ever shows under attached devices
Nogotaclue, my next step it to try Philz recovery & see where that takes me, i'll let you know how that goes (Although I fear it will just have the same outcome as the rest & not be able to read an sdcard)
Thanks again
Click to expand...
Click to collapse
Man flash Philz 5.15.9 mount your sd card and you are ready to go only in this version sd card mount work no TWRP no CWM exactly Philz 5.15.9
Hey all,
So, my smart self was attempting to flash Marshmallow 6.0 from 4.3 (rooted)...I did the same thing that was here on this THREAD and now my tab can only go into TWRP, but there's no OS installed because I wiped (and didn't make a darn backup....), but there are a few differences from the thread I referred to:
- I can get into my Bootloader
- I can get into TWRP
- I have the current TWRP 2.8.7
- I've tried the Nexus Toolkit from HERE, my device serial is recognized, but it states that I'm offline
- Because I'm offline, I can't push any files to my device through the tool
- When I'm in TWRP, my computer will recognize my tablet and I can actually get into folders and what not, but I can't copy/paste any files to flash within TWRP and I get an error
- Anytime I power down or reboot within TWRP, it tells me that I have No OS installed
- I can't use ADB (as far as I know) because my device shows that it's offline
Is there any hope that I can recover even back to 4.3?
Any guidance would really be appreciated. I have to step away because I'm frustrated and am angry at myself that I didn't make a nandroid.
Thanks in advance.
kevs888 said:
Hey all,
So, my smart self was attempting to flash Marshmallow 6.0 from 4.3 (rooted)...I did the same thing that was here on this THREAD and now my tab can only go into TWRP, but there's no OS installed because I wiped (and didn't make a darn backup....), but there are a few differences from the thread I referred to:
- I can get into my Bootloader
- I can get into TWRP
- I have the current TWRP 2.8.7
- I've tried the Nexus Toolkit from HERE, my device serial is recognized, but it states that I'm offline
- Because I'm offline, I can't push any files to my device through the tool
- When I'm in TWRP, my computer will recognize my tablet and I can actually get into folders and what not, but I can't copy/paste any files to flash within TWRP and I get an error
- Anytime I power down or reboot within TWRP, it tells me that I have No OS installed
- I can't use ADB (as far as I know) because my device shows that it's offline
Is there any hope that I can recover even back to 4.3?
Any guidance would really be appreciated. I have to step away because I'm frustrated and am angry at myself that I didn't make a nandroid.
Thanks in advance.
Click to expand...
Click to collapse
Are you using stock rom? Because if you are, I wouldn't even try. What with the widespread knowledge that stock might brick, some people insist on it. Otherwise, if you can get to the bootloader:
(1) Make sure it's unlocked (if you're not familiar, connect tab to PC, make sure fastboot works, then enter "fastboot oem unlocked" without the quotes then follow instructions on your tab);
(2) Flash bootloader 4.05 if you haven't already;
(3) Get a USB OTG thumb drive (you might need an OTG adapter for this); and download a Marshmallow-based custom rom in the Android Development section;
(4) Get into TWRP and mount USB OTG. You should see all the files on your thumb drive;
(5) Copy all data you care about to your PC;
(6) Wipe everything except USB OTG twice. Then go to Format and do it twice too. If yours is 32GB, it will take a while (30 Mins average depending on how much data);
(7) Flash rom, then Gapps.
You should be able to boot after that. Good luck.
(4)
graphdarnell said:
Are you using stock rom? Because if you are, I wouldn't even try. What with the widespread knowledge that stock might brick, some people insist on it. Otherwise, if you can get to the bootloader:
(1) Make sure it's unlocked (if you're not familiar, connect tab to PC, make sure fastboot works, then enter "fastboot oem unlocked" without the quotes then follow instructions on your tab);
(2) Flash bootloader 4.05 if you haven't already;
(3) Get a USB OTG thumb drive (you might need an OTG adapter for this); and download a Marshmallow-based custom rom in the Android Development section;
(4) Get into TWRP and mount USB OTG. You should see all the files on your thumb drive;
(5) Copy all data you care about to your PC;
(6) Wipe everything except USB OTG twice. Then go to Format and do it twice too. If yours is 32GB, it will take a while (30 Mins average depending on how much data);
(7) Flash rom, then Gapps.
You should be able to boot after that. Good luck.
(4)
Click to expand...
Click to collapse
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
kevs888 said:
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
Click to expand...
Click to collapse
It shouldn't make a difference what rom you flash now so long as you wipe and format everything inside TWRP. But you must make sure you have bootloader 4.05. 4.02 will not allow you to flash LL or MM successfully, and the system does not upgrade on its own no matter what rom you're flashing now.
Since you said you couldn't get TWRP to copy anything, I suggested that you use a thumb drive. Basically, if you turn the tab totally off, hold power + volume down for a few seconds, it should take you to the fastboot page (pic). Look to see what bootloader version you have there.
From here, you can basically flash anything. I recommended that you wipe and format first with TWRP because it happened to me a few times when for some reason, wiping alone still left some residual data that interfered with flashing newer roms.
Stay away from anything stock for the moment. God knows it has bricked more than a few devices. Download SkipsoftToolKit and flash from the fastboot page if you want an automated process. It has worked wonderfully in my experience. Ask if you have more questions. Have fun.
kevs888 said:
Thanks for this! A few questions...
- Before I wiped my OS, I was running the Smooth ROM. Does this make a difference? - Regarding fastboot, how do I get into it? I can't use adb because it lists my tablet as Offline when I type in "adb devices"...
- My lock icon is unlocked at the Google screen, but it stops there since I currently have no OS
- Would I be able to skip to your Step 4 just use the USB OTG and mount the original 4.3 OS through TWRP?
- Should I just flash the OEM 4.3? Or should I load the Smooth ROM or whatever other ROM instead of the OEM 4.3?
Thanks for your continued help!
Click to expand...
Click to collapse
Fastboot page
graphdarnell said:
It shouldn't make a difference what rom you flash now so long as you wipe and format everything inside TWRP. But you must make sure you have bootloader 4.05. 4.02 will not allow you to flash LL or MM successfully, and the system does not upgrade on its own no matter what rom you're flashing now.
Since you said you couldn't get TWRP to copy anything, I suggested that you use a thumb drive. Basically, if you turn the tab totally off, hold power + volume down for a few seconds, it should take you to the fastboot page (pic). Look to see what bootloader version you have there.
From here, you can basically flash anything. I recommended that you wipe and format first with TWRP because it happened to me a few times when for some reason, wiping alone still left some residual data that interfered with flashing newer roms.
Stay away from anything stock for the moment. God knows it has bricked more than a few devices. Download SkipsoftToolKit and flash from the fastboot page if you want an automated process. It has worked wonderfully in my experience. Ask if you have more questions. Have fun.
Click to expand...
Click to collapse
This is really helpful...I think I'm almost there.
I'm on a super old Bootloader (see attachment) so I'll need to update. I downloaded the update from this XDA Thread
More questions:
- Would I be able to push the 4.05 bootloader update and custom whatever Marshmallow ROM via the toolkit instead of from a USB OTG?
- If I was rooted on 4.3, am I still rooted so that I would be able to flash the custom ROM? I don't want to risk doing further damage, lol.
- I'm not home at the moment, so I can't test this out -- I'm thinking I couldn't put anything into my tablet last night because it was running TWRP and I didn't have it on the Fastboot screen. Would being in the Fastboot screen possibly allow me to copy/paste the zip files into my tablet?
- If there's nothing I need to copy from the tablet, would I still need the USB OTG? Or could I just use the Toolkit to push everything into my tablet and flash via TWRP?
Based on your answers to the above would this be the correct order:
1. Push 4.05 bootloader update and custom ROM via toolkit to my tablet
2. Flash 4.05 bootloader update within TWRP
3. *Per your earlier advice* Wipe everything except USB OTG twice. Is this cache, dalvik, system, and data? Or literally there's an option for "wipe everything" (I don't remember what I saw)?
4. Then go to Format and do it twice, too. I have a 32GB, so I'm expecting it to take awhile for the format
5. Flash ROM, then Gapps. I don't have any apps I need to put back so much as I need an OS to load, so I can add later.
Thanks again for everything!
EDIT:
Okay, so I came home and was able to use the Toolkit to recognize the device in fastboot mode. However, I wasn't able to push anything into the phone because the Toolkit said that I needed to be booted into Android.
The last thing I saw when I was in TWRP poking around was that I saw that I could install .zip files from USB OTG. Are either of these alright for me to connect my flash drive to and be recognized inside TWRP?
Example 1
Example 2
kevs888 said:
This is really helpful...I think I'm almost there.
I'm on a super old Bootloader (see attachment) so I'll need to update. I downloaded the update from this XDA Thread
More questions:
- Would I be able to push the 4.05 bootloader update and custom whatever Marshmallow ROM via the toolkit instead of from a USB OTG?
- If I was rooted on 4.3, am I still rooted so that I would be able to flash the custom ROM? I don't want to risk doing further damage, lol.
- I'm not home at the moment, so I can't test this out -- I'm thinking I couldn't put anything into my tablet last night because it was running TWRP and I didn't have it on the Fastboot screen. Would being in the Fastboot screen possibly allow me to copy/paste the zip files into my tablet?
- If there's nothing I need to copy from the tablet, would I still need the USB OTG? Or could I just use the Toolkit to push everything into my tablet and flash via TWRP?
Based on your answers to the above would this be the correct order:
1. Push 4.05 bootloader update and custom ROM via toolkit to my tablet
2. Flash 4.05 bootloader update within TWRP
3. *Per your earlier advice* Wipe everything except USB OTG twice. Is this cache, dalvik, system, and data? Or literally there's an option for "wipe everything" (I don't remember what I saw)?
4. Then go to Format and do it twice, too. I have a 32GB, so I'm expecting it to take awhile for the format
5. Flash ROM, then Gapps. I don't have any apps I need to put back so much as I need an OS to load, so I can add later.
Thanks again for everything!
EDIT:
Okay, so I came home and was able to use the Toolkit to recognize the device in fastboot mode. However, I wasn't able to push anything into the phone because the Toolkit said that I needed to be booted into Android.
The last thing I saw when I was in TWRP poking around was that I saw that I could install .zip files from USB OTG. Are either of these alright for me to connect my flash drive to and be recognized inside TWRP?
Example 1
Example 2
Click to expand...
Click to collapse
If you're comfortable using the ToolKit, you don't need an OTG cable. Connect your tab to PC, fire up ToolKit, complete all the prelim BS, then flash the bootloader from TK. Do not use TWRP for this. To do this, open the ToolKit folder in drive C:, locate the folder therein for zips, place the zip files (4.05 bootloader; TWRP; or custom roms) in there, and start to install. I am talking off the top of my head. But give me a few minutes to check the Kit again, and I'll give specific instructions. Bear with me, as I'm on Linux at the moment and therefore cannot start ToolKit (which is in Windows).
Things to do in order:
1. Download bootloader 4.05 (flashable zip HERE); and custom rom of your choice (zip format)
2. Locate the Unified Android ToolKit on drive C: on your PC and open it;
3. Locate the folder “put zip file to sideload here” → “Nexus 7 2013” then paste
bootloader zip and Rom zip in there;
4. Fire up Toolkit with tab connected; complete all the prelim questions;
5. Follow all the steps to install TWR 2870 (pic 8, choice 6);
6. Go to TWRP, wipe and format.
7. Go back to TWRP main page → “Advanced” → “ADB sideload”;
8 Go to ToolKit (pic 8) enter choice 16 (Look at the pics that follow for the correct choices) to
sideload Bootloader;
9. Flash Bootloader.
10. Go back to TWRP main page → Reboot → Bootloader. Once there check bootloader version 4.05;
11. Get into TWRP to sideload Rom; flash it.
graphdarnell said:
Things to do in order:
1. Download bootloader 4.05 (flashable zip HERE); and custom rom of your choice (zip format)
2. Locate the Unified Android ToolKit on drive C: on your PC and open it;
3. Locate the folder “put zip file to sideload here” → “Nexus 7 2013” then paste
bootloader zip and Rom zip in there;
4. Fire up Toolkit with tab connected; complete all the prelim questions;
5. Follow all the steps to install TWR 2870 (pic 8, choice 6);
6. Go to TWRP, wipe and format.
7. Go back to TWRP main page → “Advanced” → “ADB sideload”;
8 Go to ToolKit (pic 8) enter choice 16 (Look at the pics that follow for the correct choices) to
sideload Bootloader;
9. Flash Bootloader.
10. Go back to TWRP main page → Reboot → Bootloader. Once there check bootloader version 4.05;
11. Get into TWRP to sideload Rom; flash it.
Click to expand...
Click to collapse
Wow, this is awesome. Thank you so much.
I had already flashed TWRP 2870 before I wiped the OS, but I figured I'd try again using the Toolkit, but I got an error. I stopped here just in case.
Earlier, I tried flashing the zip for the bootloader the same way you just instructed, but my serial number turned into question marks?
Please see attachments. My pics are on the right side of the comparisons and I blacked out some of my serial number just in case for the TWRP pic.
Thanks again for the continued support!
kevs888 said:
Wow, this is awesome. Thank you so much.
I had already flashed TWRP 2870 before I wiped the OS, but I figured I'd try again using the Toolkit, but I got an error. I stopped here just in case.
Earlier, I tried flashing the zip for the bootloader the same way you just instructed, but my serial number turned into question marks?
Please see attachments. My pics are on the right side of the comparisons and I blacked out some of my serial number just in case for the TWRP pic.
Thanks again for the continued support!
Click to expand...
Click to collapse
Ok. One step at a time. Since you don't have an OS installed, ToolKit cannot complete the process of sideloading because it normally would have to use ADB from within the OS (which is absent) to restart the tab into recovery mode (TWRP). But if you're already in sideload mode within TWRP, it would detect it and transfer the file over to your tab. Let's go back.
(1) Fire up ToolKit (TK), go to sideload step, type the file name and stop. Get to fastboot page on your tab. Go back to TK and hit enter. TK should detect fastboot mode, download TWRP 2.7.1.1, take the tab into TWRP, tell you to go to sideload mode. Thereafter, it should detect this mode and transfer the file over. Then TWRP would flash the bootloader 4.05 automatically. If successful, sideload the rom the same way to flash it. Then upgrade TWRP back to 2870 with TK.
(2) Failing the above (because TWRP somehow doesn't function correctly), put the tab in fastboot mode, go to TK and follow the steps to flash TWRP anew. TK should detect fastboot and begin to flash the recovery. That done, go back and restart (1) above.
(3) If that still doesn't work, we have to resort to fastboot.exe and do it by command lines. But that's far ahead. Try the above first. We'll cross that bridge if we get to it.
I can send you an automated package that would upgrade the bootloader to 4.04 that I downloaded a year ago from Scott's Roms (thanks to him). It's good enough for Lollipop 5.1. The file is about 4MB and I'm not sure how we can do this through XDA. But if we ever get there, I'm certain we'll find a way. And smile, it's only a lousy tab.
graphdarnell said:
Ok. One step at a time. Since you don't have an OS installed, ToolKit cannot complete the process of sideloading because it normally would have to use ADB from within the OS (which is absent) to restart the tab into recovery mode (TWRP). But if you're already in sideload mode within TWRP, it would detect it and transfer the file over to your tab. Let's go back.
(1) Fire up ToolKit (TK), go to sideload step, type the file name and stop. Get to fastboot page on your tab. Go back to TK and hit enter. TK should detect fastboot mode, download TWRP 2.7.1.1, take the tab into TWRP, tell you to go to sideload mode. Thereafter, it should detect this mode and transfer the file over. Then TWRP would flash the bootloader 4.05 automatically. If successful, sideload the rom the same way to flash it. Then upgrade TWRP back to 2870 with TK.
(2) Failing the above (because TWRP somehow doesn't function correctly), put the tab in fastboot mode, go to TK and follow the steps to flash TWRP anew. TK should detect fastboot and begin to flash the recovery. That done, go back and restart (1) above.
(3) If that still doesn't work, we have to resort to fastboot.exe and do it by command lines. But that's far ahead. Try the above first. We'll cross that bridge if we get to it.
I can send you an automated package that would upgrade the bootloader to 4.04 that I downloaded a year ago from Scott's Roms (thanks to him). It's good enough for Lollipop 5.1. The file is about 4MB and I'm not sure how we can do this through XDA. But if we ever get there, I'm certain we'll find a way. And smile, it's only a lousy tab.
Click to expand...
Click to collapse
Let me just say, I'm so thankful for your help in all of this. Seriously. Thank you.
I kept on tinkering with the ToolKit and Fastboot kept on stopping everytime I switched to TWRP. I got to the point where TWRP showed 2.7.1 but the ADB Sideload kept getting stuck at the "Starting Sideload" prompt.
I went out and bought a $3 OTB USG cable and figured I'd give it a go since this sounded easier (theoretically). At first, I couldn't understand why the OTG wasn't recognized within TWRP. Then, I realized I needed to mount it within TWRP.
Once it mounted, I wiped and flashed the 4.05 bootloader zip. Success.
I went back into the Fastboot screen to verify 4.05. Success.
Went back into TWRP 2.8.7 and flashed a 6.0 ROM from these boards. Success.
Flashed Gapps. Success.
Rebooted. I'm now running a custom Marshmallow ROM and it runs so smoothly now.
Seriously. Thank you.
kevs888 said:
Let me just say, I'm so thankful for your help in all of this. Seriously. Thank you.
I kept on tinkering with the ToolKit and Fastboot kept on stopping everytime I switched to TWRP. I got to the point where TWRP showed 2.7.1 but the ADB Sideload kept getting stuck at the "Starting Sideload" prompt.
I went out and bought a $3 OTB USG cable and figured I'd give it a go since this sounded easier (theoretically). At first, I couldn't understand why the OTG wasn't recognized within TWRP. Then, I realized I needed to mount it within TWRP.
Once it mounted, I wiped and flashed the 4.05 bootloader zip. Success.
I went back into the Fastboot screen to verify 4.05. Success.
Went back into TWRP 2.8.7 and flashed a 6.0 ROM from these boards. Success.
Flashed Gapps. Success.
Rebooted. I'm now running a custom Marshmallow ROM and it runs so smoothly now.
Seriously. Thank you.
Click to expand...
Click to collapse
I'm glad you got it working again. Sorry you had to make a trip to the store. You should've waited for KT to switch the tab to TWRP 2711 for you. But it was not a waste of time anyway.
Hi.
Apologies if this is a very naive question, I am not particularly familiar with mods, roms and so forth.
I have rooted another phone in the past, but that is all.
The situation:
- Samsung Galaxy Nexus
- Not rooted/unlocked. Stock android automatically updated to the latest Android version supported
- Android developer option NOT set in settings
- Stuck in a boot loop: boots to android and then after a few seconds reboots, so no time to do anything
- Not sure how it happened, I had it for years, it was in my pocket and suddenly started doing that.
- Android fastboot and recovery loads up no problem
- I have tried anything I could find online to fix it: deleted cache, rebooted in safe mode, removed battery for 10 hours
- Nothing seems to fix it, it keeps rebooting
- I want to try a factory reset, but my family photos are in the phone
- Google synch seems to have stopped functioning for this device a year ago, all my 2016-17 photos and videos are locked in the phone.
Admitting there is nothing to do about the loop problem:
Is there any way I can copy photos and videos via usb while in recovery mode?
After I will reset the phone via recovery menu, hoping it will fix it. IF that does not fix it, I will flash another rom in. But I really do not want to wipe my data before backing them up.
I am assuming the answer is no, you cannot access the internal memory in fastboot/recovery unless your phone is rooted.
But I would like an expert opinion before I resolve to wipe one year of photos and videos which I will regret losing.
@mcaldo DON'T DO FACTORY RESET, EVERYTHING WILL BE LOST
which recovery are you using..?
if it's TWRP, then it's easy..
- boot into TWRP recovery
- go to "Mount" tab
- find "enable/disable MTP" button at lower options.. (enable it )
then connect your phone to that PC, where you always connected in past, ( to eliminate driver installation stage, all drivers will be preinstalled )
Regards
____Mdd said:
@mcaldo DON'T DO FACTORY RESET, EVERYTHING WILL BE LOST
which recovery are you using..?
if it's TWRP, then it's easy..
- boot into TWRP recovery
- go to "Mount" tab
- find "enable/disable MTP" button at lower options.. (enable it )
then connect your phone to that PC, where you always connected in past, ( to eliminate driver installation stage, all drivers will be preinstalled )
Regards
Click to expand...
Click to collapse
Thanks for your reply!
By recovery, I meant 'android system recovery'
It gives me the following options:
reboot system now
apply update from ADB
apply update from USB drive
wipe data/factory reset
wipe cache partition
Is any of the above useful?
Unfortunately, I do not have any alternative recovery software available
Edit: Googling I found this: "Apply update from ADB: The Android Debug Bridge allows you to plug your device into your PC and issue commands from there. "
If I can issue commands through ADB, perhaps there is a command to copy data from my phone to my computer?
mcaldo said:
Thanks for your reply!
By recovery, I meant 'android system recovery'
It gives me the following options:
reboot system now
apply update from ADB
apply update from USB drive
wipe data/factory reset
wipe cache partition
Is any of the above useful?
Unfortunately, I do not have any alternative recovery software available
Edit: Googling I found this: "Apply update from ADB: The Android Debug Bridge allows you to plug your device into your PC and issue commands from there. "
If I can issue commands through ADB, perhaps there is a command to copy data from my phone to my computer?
Click to expand...
Click to collapse
Yes, you can copy through adb commands..
Get and extract Minimal ADB and Fastboot from here: https://forum.xda-developers.com/showthread.php?t=2317790
From PC, run CMD to extracted folder directory.
Connect phone to PC, go to update from ADB(in recovery),
Type "adb device" , it will show serial number and connected..
Then "adb pull /sdcard " (if you know particular directory of data then write it like /sdcard/photos,, otherwise writing /sdcard will copy all folders from your phone. )
it will start copying to same adb folder ..
____Mdd said:
Yes, you can copy through adb commands..
Get and extract Minimal ADB and Fastboot from here: https://forum.xda-developers.com/showthread.php?t=2317790
From PC, run CMD to extracted folder directory.
Connect phone to PC, go to update from ADB(in recovery),
Type "adb device" , it will show serial number and connected..
Then "adb pull /sdcard " (if you know particular directory of data then write it like /sdcard/photos,, otherwise writing /sdcard will copy all folders from your phone. )
it will start copying to same adb folder ..
Click to expand...
Click to collapse
Thanks for the advice.
I followed the instructions closely, and nearly got there.
adb devices returns
#serialnumber sideload
so all good
but adb pull /sdcard returns
adb: error connect failed: closed
I tried several other commands with no success
kill-server and start-server work fine but do not solve the problem
adb usb returns
error closed
So, I am starting thinking that the problem is in the bootloader being locked.
However, if I unlock it, it will be wipe all my data, I understand?
Googling about it, I found this:
The behavior is status-by-design. Your stock recovery is not designed to grant shell access. Your only choice here is to somehow manage to flash a custom recovery. – Firelord Dec 30 '15 at 14:19
3
To achieve something similar to what @FireLord suggested: TWRP can be booted on many devices without being installed. For that, find a matching image, then boot to the bootloader and run fastboot boot twrp.img. Btw: you can check with fastboot devices resp. adb devices whether a device is visible to the corresponding tool. – Izzy♦ Jul 8 '16 at 19:40
So I understand one could boot TWRP without installing it, but I am not sure if that means I could do that with the bootloader locked?
I found WugFresh nexus root toolkit which seems to do that, among many other things, but again it warns that the phone must be unlocked (using the android build "Android *.* Any", I did not know what else to choose, not sure if that makes any difference as for locked/unlocked requirements)
EDIT: my fastboot screen reads "FASTBOOT STATUS - Failbootloader locked" as the last line, when trying to run TWRP without installing.
Yes, unlocking bootloader will wipe everything..
What actually you did ? Why it went into bootloop ???
I have also read that about boot into TWRP without installing.. and it worked for many one without unlocking bootloader... Don't know why not on GNex.
____Mdd said:
Yes, unlocking bootloader will wipe everything..
What actually you did ? Why it went into bootloop ???
I have also read that about boot into TWRP without installing.. and it worked for many one without unlocking bootloader... Don't know why not on GNex.
Click to expand...
Click to collapse
What actually you did ? Why it went into bootloop ???
Click to expand...
Click to collapse
A very good question, to which I have no answer, unfortunately.
The phone was used by my wife for 2 years and then by me for other 2. I recently changed the battery.
Never rooted or unlocked. No unusual apps installed. I am a very basic user, as you might have guessed, and being my only phone at the moment, I really would not risk experimenting with it.
It went very slow over the last 4 months, so I was planning to reset it.
I put in my coat pocket for a few hours, when I took it out it had a train ticked stuck to the screen and was quite warm and on the lock screen. It froze, so I took the battery out and restarted it. From then on it is stuck in a loop, not sure why really.
I have also read that about boot into TWRP without installing.. and it worked for many one without unlocking bootloader... Don't know why not on GNex
Click to expand...
Click to collapse
That's good to know. I'll research more than.
It seems there might be a problem with the fastboot drivers on my computer, even selecting them from device manager did not work. Win7 refuses to install. The ADB drivers in theory work fine though.
If you have done nothing modification to system, then wiping data should work, but i have doubt if it also wipes personal data too, on TWRP it wipes data excepting /data/media/ which contains all personal data.. but don't know about wiping on stock recovery...
I hope you will find solution as soon as possible..
Regards.
PS. I can install stock recovery and try wiping /data.. and check what things get wiped.. but i need little time for that experiment...
____Mdd said:
If you have done nothing modification to system, then wiping data should work, but i have doubt if it also wipes personal data too, on TWRP it wipes data excepting /data/media/ which contains all personal data.. but don't know about wiping on stock recovery...
I hope you will find solution as soon as possible..
Regards.
PS. I can install stock recovery and try wiping /data.. and check what things get wiped.. but i need little time for that experiment...
Click to expand...
Click to collapse
Thanks so much.
Looking at google's documentation on the nexus:
You can remove data from your Pixel phone or Nexus device by resetting it to factory settings. Resetting to factory settings is also known as formatting the device or doing a "hard reset".
If you're factory resetting your device to fix an issue, make sure that you've tried all other troubleshooting options first. Find out how to troubleshoot your issue.
Important: Performing a factory reset will erase all data from the device.
Click to expand...
Click to collapse
It would seem that indeed all data will be removed.
This point, I will research a bit more into drivers, in case that is what it's preventing adb pull from working.
I really need a working phone, so if that fails I will hard reset, then unlock, root, flash in an alternative bootloader and perhaps a rom, and put ubuntu touch in dual boot. That will hopefully prevent me from loosing data in the future.
Sorry, this is out of topic to my question, but, , could you suggest any stable, solid rom for the nexus?
I read good things of CM12, and I ran into one which seemed to do to quite well with split windows, but I do not remember the name right now.
EDIT: I remember the name of the rom now, it's https://omnirom.org/about/
A last question if you can..
I tried to solve my boot loop problem by sideloading an update from google (maguro yakju yakju-jwr66y-factory-4cadea65.zip)
It loaded it fine but then failed because the installation it says it is not signed.
Basically, being a stock bootloader recovery from Samsung, it will only sideload OTAs from samsung, not the stock ones from google..
I cannot find the samsung ones anywhere, not for the nexus anyway, just the newer devices..
By any chance do you know where I could download proper Samsung OTA zip updates for the nexus?
Well, I talked with an android developer who confirmed that, unless you have a friend working in criminal forensic technology or similar, there is no way to get around a lock on this phone to pull data out.
So, sadly, I have wiped my phone by unlocking it, flashed TWRP and then omnirom with gapps.
My photos are gone, including a bunch of stuff my kid had made and asked me to photograph for safeeping. Very safe indeed
He kept asking me why they make the lock like that, instead of allowing some kind of password, perhaps he has a point.
So, it is quite unlikely that somebody who knows as little as I did will ever read this *before* finding themselves in the same situation.
But if you do, back up your data, unlock and flash TWRP, clockworks or some alternative, and thank yourself if and when disaster strikes..
@mcaldo wiping data/factory reset in STOCK RECOvERY will wipe everything... There is very few chances to get backup...
And yeah i found something interesting..
You can flash system.img.. only system files will be corrected not anything else..
Get appropriate zip from here : https://developers.google.com/android/images
Now take system.img to ADB/Fastboot folder ( i assume you know how it works )
Just go "Fastboot flash system system.img"
It will rewrite system partition..
Another one:
See downloads on this thread..
One says NON-WIPE, if you want me to try that zip, i will again require time for that. See here : https://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470
---------- Post added at 11:12 AM ---------- Previous post was at 11:09 AM ----------
I don't saw your reply, it was on next page.. its sad... Sorry i am late..
Hi there,
I think I (soft? hard?) bricked my whyred today after trying to install Pixel Experience (Android 10). At this time, I'm left with a flashed PE Plus that is stuck at the Google logo animation (e.g. unable to access USB debug settings); stock MIUI recovery; and fastboot, which is not recognized by ADB as I haven't had a successful boot since I flashed PE, so I can't turn USB debug on. I think I've exhausted my options, but maybe someone has a smart solution.
For those who think they can help, let me describe in detail what I did:
0) I became a dev, turned USB debug on, installed Minimal ADB and Fastboot, latest Xiaomi drivers, moved flashable zips into internal storage etc.
1) I unlocked my bootloader through Mi Unlock.
2) I successfully flashed TWRP-3.3.1.0-whyred via ADB/Fastboot and rebooted. After getting back into MIUI, I booted into recovery, which was back to stock (MIUI seems to have overwritten my recovery). At that point (probably a big mistake) I gave up on flashing TWRP and went ahead to boot right into it via ADB instead, without flashing.
3) After a successful boot into TWRP 3.3.1.0, it asked me for a decryption password. Nothing worked, so I kept googling and found out that my version of android needs TWRP 3.3.1.1, which was not on the official TWRP website yet, to decrypt automatically. I booted into TWRP 3.3.1.1 via ADB (but didn't flash), made a backup of my stock ROM, did a wipe (art/dalvik cache, cache, data, system, vendor), flashed Pixel Experience and rebooted.
4) Bootloop, I was stuck on the Google loading animation for over 20 minutes, nothing happened.
5) I panicked.
6) I tried to flash TWRP 3.3.1.1 via ABD but my PC didn't recognize my phone - probably because, for lack of successful boots, I have not managed to turn on USB debug.
7) I tried to connect to Mi Assistant through stock recovery. It didn't recognize my phone, probably for the above reason.
8) I did a data wipe through stock recovery and rebooted, hoping for whatever issue kept PE from booting normally to get resolved.
9) I'm stuck on the same Google loading animation for over 40 minutes now, no progress.
Does any of you guys see a way out, or is this story over? To recap, I have: 1) PE Plus in bootloop, no access to dev settings, 2) stock MIUI recovery with options to reboot, wipe data or connect to Mi Assistant, 3) stock fastboot, 4) a backup of my previous system on internal storage, 5) ADB on my computer that doesn't recognize my phone - no USB debugging. I don't know where to turn. I don't care much about data, I have everything in the cloud, but I'd like to save the phone if possible.
Thanks a lot.
Edit: Problem resolved - even though the connected device didn't show up in ADB on PC (adb devices came back empty), the phone was still responsive to fastboot reboot and fastboot flash recovery via PC, so I could flash TWRP 3.3.1.1 & clean flash PE. For anyone struggling with PE bootloops: make sure to 1) use TWRP 3.3.1.1 to flash, 2) do a dalvik/cache wipe after flashing the ROM and 3) not to install the TWRP app before the first successful boot - it was neglecting either 2) or 3) that caused my bootloop. The ROM itself is amazing!
mkohan said:
Hi there,
I think I (soft? hard?) bricked my whyred today after trying to install Pixel Experience (Android 10). At this time, I'm left with a flashed PE Plus that is stuck at the Google logo animation (e.g. unable to access USB debug settings); stock MIUI recovery; and fastboot, which is not recognized by ADB as I haven't had a successful boot since I flashed PE, so I can't turn USB debug on. I think I've exhausted my options, but maybe someone has a smart solution.
For those who think they can help, let me describe in detail what I did:
0) I became a dev, turned USB debug on, installed Minimal ADB and Fastboot, latest Xiaomi drivers, moved flashable zips into internal storage etc.
1) I unlocked my bootloader through Mi Unlock.
2) I successfully flashed TWRP-3.3.1.0-whyred via ADB/Fastboot and rebooted. After getting back into MIUI, I booted into recovery, which was back to stock (MIUI seems to have overwritten my recovery). At that point (probably a big mistake) I gave up on flashing TWRP and went ahead to boot right into it via ADB instead, without flashing.
3) After a successful boot into TWRP 3.3.1.0, it asked me for a decryption password. Nothing worked, so I kept googling and found out that my version of android needs TWRP 3.3.1.1, which was not on the official TWRP website yet, to decrypt automatically. I booted into TWRP 3.3.1.1 via ADB (but didn't flash), made a backup of my stock ROM, did a wipe (art/dalvik cache, cache, data, system, vendor), flashed Pixel Experience and rebooted.
4) Bootloop, I was stuck on the Google loading animation for over 20 minutes, nothing happened.
5) I panicked.
6) I tried to flash TWRP 3.3.1.1 via ABD but my PC didn't recognize my phone - probably because, for lack of successful boots, I have not managed to turn on USB debug.
7) I tried to connect to Mi Assistant through stock recovery. It didn't recognize my phone, probably for the above reason.
8) I did a data wipe through stock recovery and rebooted, hoping for whatever issue kept PE from booting normally to get resolved.
9) I'm stuck on the same Google loading animation for over 40 minutes now, no progress.
Does any of you guys see a way out, or is this story over? To recap, I have: 1) PE Plus in bootloop, no access to dev settings, 2) stock MIUI recovery with options to reboot, wipe data or connect to Mi Assistant, 3) stock fastboot, 4) a backup of my previous system on internal storage, 5) ADB on my computer that doesn't recognize my phone - no USB debugging. I don't know where to turn. I don't care much about data, I have everything in the cloud, but I'd like to save the phone if possible.
Thanks a lot.
Click to expand...
Click to collapse
I'm new to this phone as well (but not to Android). Try the following:
Download TWRP from here -> https://androidfilehost.com/?fid=6006931924117884758
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip from here -> https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Power off phone. Hold down volume down and power button to boot into fastboot
Give the command fastboot flash recovery twrp-3.3.1-1-whyred.img to flash the recovery you downloaded earlier.
Boot into recovery
Flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip that you downloaded earlier
The above steps will at least ensure that you retain TWRP and it doesn't get overwritten by stock MIUI recovery
After that, check whether or not your phone/ROM has anti-rollback enabled and take appropriate steps accordingly.
Ok so i flashed PE 10 plus today and was met with the same problem.
Heres how i solved it
Goto fastboot option by pressing volume down and power button
Connect to pc (If it doesnt recognize, reinstall Adb drivers and phone drivers)
If it asks for decryption password just press cancel
Wipe data/internal/vendor (wont be able to wipe dalvik as it wont mount)
Flash PE 10 Plus and nothing else.
It should boot just fine.
However i run into bootloop if i flash latest magisk so i cant root my phone :/
Hope this helps
mkohan said:
Edit: Problem resolved - even though the connected device didn't show up in ADB on PC (adb devices came back empty), the phone was still responsive to fastboot reboot and fastboot flash recovery via PC, so I could flash TWRP 3.3.1.1 & clean flash PE. For anyone struggling with PE bootloops: make sure to 1) use TWRP 3.3.1.1 to flash, 2) do a dalvik/cache wipe after flashing the ROM and 3) not to install the TWRP app before the first successful boot - it was neglecting either 2) or 3) that caused my bootloop. The ROM itself is amazing!
Click to expand...
Click to collapse
hey read your post
actually adb and fastboot are two different things.
and recovery is flashed using fastboot commands not adb.
sometimes if a rom is not booting it may have issues with encryption.