I am new to posting in forums but I'm eager to learn. I have limited experience with ubuntu and linux in general. I am a college student but I have good knowledge of computers and know some language including HTML, Visual basic, SQL, C, etc...
I have a Archos 5 Android 7502 160GB version and I am looking for information on how I would be able to get help developing a ROM update for the Archos. I HAVE DONE MY RESEARCH. I've been looking this up since I got the device in December.
I know many drivers need to be adapted to the ROM for the archos to be able to run it. I wanted to know what Application I should use and if I can only do it using ADB bridge. (I know little about how the bridge works)
I have the Developer Edition Firmware from openAOS installed on the Archos. This installs a bootloader that can be edited with menu.lst on the device default folder. I also have 3 ROMs I can boot to: 1. Android 1.6 (Default OS) 2. Froyo 2.2 (In Development) 3. Angstrom Linux (comes with developer driver)
It is my understanding that the source code is available for the Archos Gen 7 Tablets on the Archos website. (Can't link due to being a new user)
Also gingerbread has its source code released. (Can't find link, yet...)
I was wondering what steps would be involved in adapting the drivers for the ROM for the Archos Gen 7 Tablet?
Also how much time would be needed to finish the project?
jimboobrien said:
I am new to posting in forums but I'm eager to learn. I have limited experience with ubuntu and linux in general. I am a college student but I have good knowledge of computers and know some language including HTML, Visual basic, SQL, C, etc...
I have a Archos 5 Android 7502 160GB version and I am looking for information on how I would be able to get help developing a ROM update for the Archos. I HAVE DONE MY RESEARCH. I've been looking this up since I got the device in December.
I know many drivers need to be adapted to the ROM for the archos to be able to run it. I wanted to know what Application I should use and if I can only do it using ADB bridge. (I know little about how the bridge works)
I have the Developer Edition Firmware from openAOS installed on the Archos. This installs a bootloader that can be edited with menu.lst on the device default folder. I also have 3 ROMs I can boot to: 1. Android 1.6 (Default OS) 2. Froyo 2.2 (In Development) 3. Angstrom Linux (comes with developer driver)
It is my understanding that the source code is available for the Archos Gen 7 Tablets on the Archos website. (Can't link due to being a new user)
Also gingerbread has its source code released. (Can't find link, yet...)
I was wondering what steps would be involved in adapting the drivers for the ROM for the Archos Gen 7 Tablet?
Also how much time would be needed to finish the project?
Click to expand...
Click to collapse
Well I'm only going to tell u this it will be a hastle... and considering the archos 5 being one of the oldest tablets out there and the developers out there still not having froyo completley developed yet... I would guess that the project would be a VERY long project to work on. But I do incurage you to make a rom for the archos 5... Oh one question is it the archos 5 you have or the archos 5 internet tablet...
Smooth debian linux with and without GUI.
I am not linked in any way to this App or its developer. But I have been searching for an out of the box linux that works on the SGS3. Out of the several I tried this was the only functioning one,
called Linux Deploy (playstore link here).
Its installs a variety of debian distros by loop method and then chrooting in VNC (or SSH). ( i use bVNC)
- may sound complicated but the app does it all . just select what you want to try and how big you want the image file and where you want to place it (internal or external SD). default settings are fine for most except if Gnome and KDE will need increase image to 1.5Gb otherwise fails)
It also gives a variety of GUI, I tried XFCE and KDE
It runs on top of Android so you can still call and receive messages etc.
The only thing I would suggest is that you unmount the loop before killing app or rebooting android. I think it will remain running in memory even if the app is killed.
Linux Deploy 1.2.7
The new Linux Deploy version, programs for automation of installation process and start of GNU/Linux of distribution kits on devices with the Android platform is available. Application creates an image of a disk on a flash card, mounts it and sets there the selected distribution kit of GNU/Linux. Also distribution kit installation directly on the card section is supported.
Applications from new Linux-system are launched in a chroot-surrounding parallely with standard operation of the Android platform. Installation of a distribution kit is carried out on a network from official mirrors on the Internet. For operation to application privileges of the superuser (ROOT) are required. Access to Linux-system is carried out through SSH, VNC or X Window System. The code of the utility is available under the license GPLv3, ready assemblies are placed in the directory Google Play.
Characteristics:
Supported OS: Debian, Ubuntu;
Assembly under architecture of armel and armhf;
Installation type: loop-file, SD card;
Supported file system: ext2, ext4;
Management interface: SSH, VNC, X;
Possibility of use of surroundings of a desktop: XTerm, LXDE, Xfce, GNOME, Unity, KDE;
Supported language: Russian, English.
Main changes in Linux Deploy 1.2.7:
X Window System support (GUI start via the X-server);
Automatic configuration of DNS;
Support of a surrounding of a desktop of Unity;
The error of start of session of GNOME in Ubuntu is corrected.
Is on GitHub, 4PDA, PlayMarket! (can't post links)
play . google . com/store/apps/details?id=ru.meefik.linuxdeploy
github . com/meefik/linuxdeploy
4pda . ru/forum/index.php?showtopic=378043
is this something like ubuntu for linux where the vnc connection(although local) becomes the bottleneck?
exge said:
is this something like ubuntu for linux where the vnc connection(although local) becomes the bottleneck?
Click to expand...
Click to collapse
not, it is ubuntu on your device
Sound
Is it possible to get the sound working this way?
linux deploy
hi can i use it on a note2
Very nicely done.
This app works really great!
At the moment I am using "Ubuntu precise" with KDE. Ist works quite well. What do you use ?
I just installed Fedora 18 with Gnome on my Nexus 10 using this app.
I am having trouble to mount the USB flash drive to it ( using an OTG usb adapter)
I don;t know enough about linux to mount the USB drive
when I plug in the drive in android the path is
/storage/sdcard0/usbStorage
This application is awesome. Everything works perfectly. Well, not everything, but I guess that is chroot's fault. Anyway, can I somehow make digitizer work? I am successfully controlling my phone through x2x, although it would be merrier if I could use my phone's digitizer for input. I'd be grateful for any kind of help.
P.S. superdave42, try custom mounting that path in Linux Deploy's settings.
linux deploy to samsung galaxy tab 2 P5100
I have the Samsung Galaxy Tab 2 P5100BUDLL1
Kernel 3.0.31-1121627
version Build jz054k.p5100BUDMD1
i have installed Linux Deploy by following the steps I was able to install Kali
I proceeded to install kali-full
but 'I still have problems with postgresql 9.1
and the wifi
wireshark with no problem only with airmon-ng does not recognize the wifi
and tells me to install 'iw-3.10.tar.bz2
I downloaded the 'iw-3.10.tar.bz2
I tried to install it in every way possible but nothing some advice
thanks to all
sorry I'm wrong the page post
It's okay. You are posting in the right thread as there's no official thread for this application in the Applications section, or at least I am not aware of it. Anyway, as far as my knowledge reaches, the reason why you can't mess with WiFi in a chrooted Linux installation is mainly because it is running in a chroot jail (feel free to correct me if I am wrong). In order to make Kali Linux (or any other Linux distribution installed through this application) able to manage WiFi state, I think you need to do some mounts that I'm not aware of at the moment, unfortunately.
EDIT: Try typing this command line (credit to Robertozzz for this post, check out the rest of it too) either from adb shell with superuser permissions or by connection to the SSH client run by Linux Deploy:
Code:
mount -o bind /dev /data/local/mnt/dev
Tapatalk seriously needs some text formatting, otherwise I need to type BBCode myself... and an option to preview.
hello nice to see someone using this beautiful app as well! there should be an official thread for this..
I manage to use both vnc uaing bvnc as well and framebuffer method.. vnc got that slight lag especially when scrolling image dense content on chromium, but framebuffer is buttery smooth!
I'm thinking of upgrading this GTN 8000 (I got the same processor as you mate exynos 4 quad 1,4ghz 2gb ram) to something with snapdragon 600 or even better 800.
anyone here with snapdragon 600 got experience with Linux Deploy? how much boost might I get from those beast? :cyclops:
thanks
Android 4.3 Supported
Just an FYI for anyone using this app. It does work in Android 4.3 with Debian. Not sure if it XVNC or Framebuffer work (download of Gnome failed), but I was able to get a chroot and shell to Debian. Looks like the developer himself hosts the downloads for the supported distros (the "MIRROR" variable in prefs), and I'm not totally thrilled about that... Nothing personal, I just like to be careful.
But on that note, the code is Open Source, and available at:
https://github.com/meefik/linuxdeploy
You don't actually need the github download. All of the real work is done with a shell script(s). After installing the app, you can find the workhorse script linuxdeploy in "/data/local/linux/bin" and this handles almost everything. Some pretty nifty code in there, a couple of cool recursion tricks I might use later.
If you're handy with the command line, you can forego the UI after initial setup/distro download.
Code:
<android> % su -
<android> # export MNT_TARGET=/data/local/linux/mnt
<android> # cd /data/local/linux
...To see the settings file
<android> # cat etc/deply.conf
.... To start the distro you already downloaded (Debian)
<android> # bin/linuxdeploy start
... To get into the now-running distro (this can be done from multiple windows in Android Terminal!)
<android> # bin/linuxdeploy shell
.... If the prompt ain't enough, test it out (hostname isn't standard on Android)
debian # hostname
localhost
...
Now, I totally hate that it downloads everything piecemeal after selecting a distro, but it may be that I just have the settings wrong. Not all distros worked for me. I got failures on finding "apt-get" when installing Ubuntu -- probably easy to fix, but I didn't look into it because I was new to chroot. I notice that there are updates in the github from just 3 days ago, so it's actively supported.
I liked his competitor Complete Linux Installer better in Android 4.2, because it's super newb friendly and explains every single step very clearly, and it worked the first time I used it. Unfortunately it failed on my Nexus 7 (2013) / Android 4.3, so I moved to Linux Deploy. Not regretting the change because I've learned a lot, but I hope to see both options on Android 4.3 soon.
-Pie
I'm having difficulties installing it on a Galaxy S4 I9500. Here's what I get as an output: /data/local/linux/bin/linuxdeploy: line 1411: dd: Permission denied I tried changing the size of the image, but that didn't help either. For what it's worth, I'm running a stock ROM as well as CWM. Also, I read somewhere that Busybox is required, so that's already installed. Could it be because I'm trying to install it on my external SD card, and not my internal memory?
Kali Linux working with "Linux Deploy" app on S4 i9505
I've found this interesting post about Kali Linux working with "Linux Deploy" app on S4 i9505
http://forum.xda-developers.com/showthread.php?t=2400638
Another suggestion I would like to make you is to consider some alternative remote session that would speed up the interface like for example:
- xrdp (much faster than vnc)
- teamviewer or Splashtop for easier access even from another computer/phone in another network. Splashtop video performance and real-time interface is really impressive
With Splashtop you can just have your own Linux PC and connect to it anytime. You could avoid to to install ARM Linux on your mobile...
[
QUOTE=delstam;44843172]I'm having difficulties installing it on a Galaxy S4 I9500. Here's what I get as an output: /data/local/linux/bin/linuxdeploy: line 1411: dd: Permission denied I tried changing the size of the image, but that didn't help either. For what it's worth, I'm running a stock ROM as well as CWM. Also, I read somewhere that Busybox is required, so that's already installed. Could it be because I'm trying to install it on my external SD card, and not my internal memory?[/QUOTE]
First of all, awesome app! Takes a lot of the steps out of getting a desktop OS working on our portable computers....
I am asking this here because I dont know where else I can ask it. So if there is a support/discussion forum specifically for the app somewhere my apologies for posting here.
Is there any way to do an install from ISO image? Kali is giving me a "failed getting release" error at the moment no matter how I put the path in (cross checked it on the site, but welcome to suggestions if anyone elses is working).
Thanks in advance.
heavylildude said:
hello nice to see someone using this beautiful app as well! there should be an official thread for this..
I manage to use both vnc uaing bvnc as well and framebuffer method.. vnc got that slight lag especially when scrolling image dense content on chromium, but framebuffer is buttery smooth!
I'm thinking of upgrading this GTN 8000 (I got the same processor as you mate exynos 4 quad 1,4ghz 2gb ram) to something with snapdragon 600 or even better 800.
anyone here with snapdragon 600 got experience with Linux Deploy? how much boost might I get from those beast? :cyclops:
thanks
Click to expand...
Click to collapse
I cant figure out how to get ssh and or vnc client connected to the linux deploy app... can you help me please?
Move Linux Deploy to MicrSD
Hi guys,
i would like to move the linux deploy application to microSD card, i have a GT-i9505, With root privilege, and foldermount installed, but i don't find the installation path of this application.
Someone can help me please ?
Bye
Cristian
SonneKonig said:
I cant figure out how to get ssh and or vnc client connected to the linux deploy app... can you help me please?
Click to expand...
Click to collapse
Hello have you tried using changeme as password?
Good day -
I am looking for the best open-source method to root my new Android 7.0
AGM A8 (qualcomm 425 snapdragon chipset, 4x AARCH64 cores) when it arrives.
I am a programmer (not a mobile device expert) with latest Android Studio + NDK
installed with Android 24 & 25 platforms for aarch64, on a Linux x86_64 Workstation.
I do not run Windows, though perhaps WINE might be a possibility; I can run Java, of course .
I will not root my device until I can assemble the source code
/ scripts and build an unlocking tool that I can read and understand - I do not want to
put my entire device security in the hands of a closed-source application that I cannot
read or build - especially one that risks bricking the device.
Please, does anyone know of an open-source rooting tool that will work for my device that I can build
and run with Android Studio ( IntellIJ Idea + SDKs + NDK + LLDB ) - on Linux ?
I also have Qt5 Designer & latest Java tools & gcc-6.3 & glibc-2.25 & binutils-2.28 & many frameworks installed .
Any suggestions gratefully received .
I have found : https://github.com/android-rooting-tools/*.git
but it looks like these take some time to learn how to use & are potentially dangerous
and not likely to work for Android 7.0 .
Ideally, I'd like a tool I can read (in C, C++ , Java, or Python or PERL or shell scripts) , build on Android Studio, run under emulator for testing,
and then push to device and run on device . Is there any such out there ? If not, it may be a long road, but I will follow till I get there / find one / write one.
Thanks & Regards,
Jason
Hi,
According to various Articles I found online The Gemini PDA is abe to Trippleboot this OSs but I am not able to select them in the Online partitioning tool provided by planetcom. As you can see in the online partitioning tool one can only select Sailfish OS and android (+ android / recovery) or Android + Linux (+ Android / recovery / Linux)
Why is there no Option for Sailfish + Android + Linux, when I am able to boot 2 Linuxes + Android.
There is even a Vid that proves that this is / was possible, the Video Title on youtube is Gemini PDA overview - UMPC/Phone that tri-boots! Android/Linux/Sailfish. I cant post the direct Link because of new Users spam policy, if someone would post it I'd be grateful.
Am I doing something wrong and if yes, what? I have a X27
Any help highly appreciated!