I have been a longtime XDA member in the X10 community, but have never before posted.
I purchased an Ion through AT&T the 24th of June, the day it launched, and after scouring the web, and XDA, I found the Hong Kong based ftf file from the link below and successfully flashed it to my phone.
Hong Kong based ftf, build 6.0.F.0.72, baseband 9x00B-SCAQCSZQ-34702060-04
http://forum.xda-developers.com/showthread.php?t=1711466
Maybe this was premature, as I am not sure how to make an ftf file, and therefore did not have my original AT&T ftf to revert to if this failed. (I would appreciate someone creating and sharing the original AT&T ftf for those who may need / want it.)
The firmware flashed successfully, and it is without all of the AT&T ware that can not be removed, and it also has a much nicer Xperia boot animation than the AT&T one, but I have noticed 2 issues with this firmware:
1. I did not back up or write down the APN or mobile network settings, and after flashing, the automatic internet settings feature in Settings, Xperia, Internet settings fails to find the AT&T network information. I did find some posts that have some AT&T APN settings (is that all that I need?) but I only occasionally get the 4G icon in the status bar when I was always there before flashing. Does this firmware possibly not utilize all of the available radio bands available on the LT28a phone as it is intended for the LT28i? Is there a hardware difference, or do I just need the correct APN settings? Can someone share these settings from the original AT&T firmware
2. Over the course of the last few days on this firmware, I have noticed that several friends have sent text messages that will show notifications on the lock screen, but as soon as I unlock the phone, I can't find the text messages anywhere. This does not happen for all people that try to send me texts, only some of them. I have tested with other people standing next to me, texting, we see it on the lock screen, then when I unlock the phone, no new messages to be found.
Can anyone provide the APN settings from AT&T for this phone, the original ftf files, and maybe provide some insight about the missing text messages?
Thanks!
It could be possible that version doesn't even support LTE? Since its international?
Sent from my LT28at using xda app-developers app
Here's mine:
NAME: ATT
APN: wap.cingular
PROXY: <NOT SET>
PORT: <NOT SET>
USER NAME: wap.cingulargprs.com
PW: <NOT SET>
SERVER: <NOT SET>
MMSC: http://mmsc.cingular.com
MMS PROXY: wireless.cingular.com
MMS PORT: 80
MCC: 310
MNC: 410
AUTH TYPE: <NOT SET>
PROTOCOL: IPv4
Of coarse this is for 3g but not sure will work for LTE. Worth a try though. eb
Sent from my X10a using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the default apn for at&t on the ion. Be interested to see if lte still works for you.
Sent from my LT28at using Tapatalk 2
Spec feel free to copy paste my post and change settings as needed, save ya some thumb typing maybe.
Also I have StraightTalk if needed. eb
Sent from my X10i using xda premium
Even Better, shoudve done the same if hadn't been on laptop.lOl
earbrain said:
Even Better, shoudve done the same if hadn't been on laptop.lOl
Click to expand...
Click to collapse
I knew I should have made the stock FTF before I configured everything and got it all setup. Maybe in the next day I will do it unless someone else does.
Hey mines still on the way, Ill do that first thing. If anybody needs anything else that an untouched stock unit can provide, leme know. eb
Sent from my X10i using xda premium
earbrain said:
Hey mines still on the way, Ill do that first thing. If anybody needs anything else that an untouched stock unit can provide, leme know. eb
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Cool that will work. Is there a wiki for the ion yet? we should get it setup with the list of stock FTF files.
Thanks for the screenshots Spectre51, I had the same settings though that I found on another post, the only difference was that "APN type" has "default, admin,fota,mms,supl,hipri,internet". I don't know that my results are really any different, but I will try with the settings you provided for a few days.
Thanks!
Earbrain, if you could make an ftf of the AT&T stock, I think it would be great. I think we should begin building a repository of firmware, basebands, etc, and keep it organized right from the beginning.
We already have the HK firmware so graciously donated by liuxueyuan1990, that I linked to in my first post. As soon as we have original AT&T, firmware to flash back to, maybe some other flash junkies will want to try it out as well.
How the internation firmware with all AT&T setting work? or do you have to flash back to original firmware?
Will do upon receipt. Should be tomor, mon at latest. eb
Sent from my X10a using xda premium
randy_c said:
How the internation firmware with all AT&T setting work? or do you have to flash back to original firmware?
Click to expand...
Click to collapse
I don't even have the original firmware to flash back to yet. The international firmware is great., my biggest issue is that some text messages, from some people ( not all, not sure if it had to do with phone Contacts vs my gmail contacts) will show on the lock screen, but when the phone is unlocked, I can't find the text messages anywhere.
I also don't get the 4G icon in the status bar up top to often, it usually says 3G or H, but I think it really is 4G speed, it is much faster than what I have seen of 3G.
I prefer this firmware to the AT&T variant, it is more like a pure Sony firmware like you would see on an unlocked phone. Missing text messages are kind of a big deal, and I may want to switch back, wish we had root so I could just back up and restore easier.:-(
I'll post the att fw soon as pos. You should be able to restore via pc connect, just fyi. eb
Sent from my X10i using xda premium
Hey guys, got my ion in-hand. Wanted to backup firmware b4 doing anything for all our sake. Will flashtool work without screwing anything up?
Also, can't help but notice the missing curved screen. Anybody know what up? All pics even ones on the box show it curved but mine certainly ain't. Is that the case w you alls or did I just get fckd??? eb
Sent from my X10i using xda premium
I've only made the ftf after getting the two largest blob_f files from the sues folder. Don't even know how you would do it using just the software on the phone.
What do you mean by curved screen?
Sent from my LT28at using Tapatalk 2
Yeah, like the Nexus. Look at all the pics in the ads, am I imagining things???
Sent from my X10i using xda premium
Must've just been the glare. My bad. eb
Sent from my X10i using xda premium
Loaded the international firmware on my LT28at and it works fine so far. Loaded the apn that I posted earlier and the wifi hotspot worked fine. Not in an LTE area though so I couldn't test that. I'm setting it all up now and will try using it for the next few days and see if I notice any issues.
I have a Xperia S bought this one because 4G (still waiting for deliver). Please test 4G if it's working. If it does I think should create a guide for flashing inter nation ROM, setting etc...
Related
removed per request.
siulmagic said:
Android-Maisters presents the first Incredible S port for the MT4G, thanks to rafyvitto.
Heres a hybrid my brother RAFYVITTO made NOT ME(u are all confusing ur self about this the ports on MT4G section from android-maisters are hes NOT MINE!) from the latest incredible S leak ruu and droid inc 2 rousie, enjoy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL]
Features:
Wifi Calling please test it!
Rooted
OC INSTALL SETCPU TO OVERCLOCK
Trackpad Wake
Note: You need to add your apn settings manually here they are:
Credits:
Evild for the kernel
marku script
Code:
NAME: T-Mobile US
APN: epc.tmobile.com
PROXY: <Not Set>
PORT: <Not Set>
USERNAME: <Not Set>
PASSWORD: <Not Set>
SERVER: <Not Set>
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS PROXY: <Not Set>
MMS PORT: <Not Set>
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
AUTH TYPE: None
APN TYPE: default,supl,mms
Working:
Everything exept 720p recording)
DOWNLOAD LINK
v1.0(uploading)
Click to expand...
Click to collapse
Thanks can't wait for it to finish uploading
Sweet ....can't wait till it's finish uploading now i can play my games. Getting the mirror up ASAP
Mirror: http://www.megaupload.com/?d=F790LHZO
"What's a Mirror?"
Yeshhhhhhhhh downloading!!!
does any type of video recording work on this?
daprince047 said:
does any type of video recording work on this?
Click to expand...
Click to collapse
yeah bro video recording work except 720p
Going to try this out.
Sent from my HTC Glacier using Tapatalk
epsix said:
yeah bro video recording work except 720p
Click to expand...
Click to collapse
Thanks I'm going to definitely try it out now
Does this have the screen-off animation?
Sent from my HTC Glacier using Tapatalk
Nevermind, just found out it was 2.2.1
Sent from my HTC Glacier using Tapatalk
its not gingerbread...so i doubt it
this rom is great but my phone has a problem on volume up down menu...there may be a shock on volume...the result is that I can not use volume down anymore...that also effect my phone when I try to install rom from HTC, my phone will access into a safe mode...any idea how to get out of it...
one thing, if I install stock rom and rom from cm7, it won't get into safe mode
any idea for help
wibul_10 said:
this rom is great but my phone has a problem on volume up down menu...there may be a shock on volume...the result is that I can not use volume down anymore...that also effect my phone when I try to install rom from HTC, my phone will access into a safe mode...any idea how to get out of it...
one thing, if I install stock rom and rom from cm7, it won't get into safe mode
any idea for help
Click to expand...
Click to collapse
I have no idea what you're talking about my volume up and down works just fine. You do know this rom is froyo 2.2.1 with Sense 2.1...using recovery 2.5.2.1 or 3.0.0.6?
Best Rom I've used so far sad that swipe isn't included
Sent from my HTC Glacier using XDA App
Flashing now. Will report later. Thanks!!!
Hi guys...on this rom there's no sound when dialing or recieving calls must turn on speaker can anyone confirm this? i just twitter @rafyvitto telling the problems is..it's a quick fix guys don't worry. I think rafyvitto forgot something i suggest you twitter him too @rafyvitto
epsix said:
Hi guys...on this rom there's no sound when dialing or recieving calls must turn on speaker can anyone confirm this? i just twitter @rafyvitto telling the problems is..it's a quick fix guys don't worry. I think rafyvitto forgot something i suggest you twitter him too @rafyvitto
Click to expand...
Click to collapse
Works fine for me only thing I don't like is mms size limit to 300k
Sent from my HTC Glacier using XDA App
Noooo its been disabled because to much traffic lol guess ill wait till after work
Sent from my HTC Glacier using XDA App
urmothersluvr said:
Noooo its been disabled because to much traffic lol guess ill wait till after work
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Did you try the mirror in post 3? i just used it and it's still working.
epsix said:
Hi guys...on this rom there's no sound when dialing or recieving calls must turn on speaker can anyone confirm this? i just twitter @rafyvitto telling the problems is..it's a quick fix guys don't worry. I think rafyvitto forgot something i suggest you twitter him too @rafyvitto
Click to expand...
Click to collapse
I have the same issue. Is this going to be fixed soon? I would like to keep this as my Daily rom.
Im going to have to flsah another rom in the meantime.Thanks.
I'm running ARHD 5.1.0 on my international unlocked HTC One X.
I'm having a problem with my phone on AT&T. It is switching between H and 3G pretty often, and only H actually functions for data. This is pretty painful, especially when trying to stream Pandora.
I'm looking for help on how to analyse what is happening.
1. How can I see what band it is trying to use on 3G?
2. Is there a way to force it to always use H or EDGE, never 3G?
3. Is there a way to tune the 3G radio for AT&T USA?
4. Is it possible that now that the kernel source is released, the frequency issues can be fixed with kernel drivers?
According to Omega.net, here are the frequencies in my area:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks!
Quick additional questions:
Is AT&T screwing with my signal? Would it make sense to modify the /system/build.prop to masquerade as a different phone?
Would modifying the /system/build.prop allow me to disable all but UTMS-II and UTMS-V?
ro.ril.imc.band=900,1800,1900,850
ro.ril.imc.uband="UMTS_BAND_I","UMTS_BAND_II","UMTS_BAND_V","UMTS_BAND_VIII"
I'm going to try disabling fast dormancy and see how that goes ala this thread:
http://forum.xda-developers.com/showthread.php?t=1111581
So far this change has had no effect. I still can't run speedtest.net for example, because it drops from H to 3G, then renegatiates to H again.
All I did was change the build.prop and reboot. Any idea if I have to do something more?
What APN are you using? the default one?
Mine changes to 3G, but only when not using data.......I've had this with every phone besides the Galaxy Nexus which stayed on H most of the time.
But I haven't tried streaming music, as I dont haha...I have it all on my phone.
Try using the Phone APN.
Create a new apn and type in phone for "Name" and phone for "APN" leave the rest blank and save, then click it to enable
pewpewbangbang said:
What APN are you using? the default one?
Mine changes to 3G, but only when not using data.......I've had this with every phone besides the Galaxy Nexus which stayed on H most of the time.
But I haven't tried streaming music, as I dont haha...I have it all on my phone.
Try using the Phone APN.
Create a new apn and type in phone for "Name" and phone for "APN" leave the rest blank and save, then click it to enable
Click to expand...
Click to collapse
You are the MAN! The APN was set to wap.cingular. Using phone as the APN I'm finally getting some Speedtest.net results! I'm going to do more tests, but this looks good so far.
TheAndroidSwap said:
You are the MAN! The APN was set to wap.cingular. Using phone as the APN I'm finally getting some Speedtest.net results! I'm going to do more tests, but this looks good so far.
Click to expand...
Click to collapse
I just tried all of that. When I delete apn and set up new one with just "phone" typed in I get no signal at all?
iximages said:
I just tried all of that. When I delete apn and set up new one with just "phone" typed in I get no signal at all?
Click to expand...
Click to collapse
I made a new APN, in the name field I typed "phone" and in the APN field I typed "phone". Then saved, and selected it as the APN I wanted to use.
I did just that but it doesnt give me the option to select it after its saved....
I just received my one x from Singapore today and am not having any data issues. I picked the at&t network when I put the sim in and it just worked.
--Matt
mkosem said:
I just received my one x from Singapore today and am not having any data issues. I picked the at&t network when I put the sim in and it just worked.
--Matt
Click to expand...
Click to collapse
I have data no problem, but I am unable to use speed test to test my signal. I was told this was a apn issue
iximages said:
I have data no problem, but I am unable to use speed test to test my signal. I was told this was a apn issue
Click to expand...
Click to collapse
I spoke too soon. Speed tests were sort of working for me initially, but is working properly now after just blanking out the proxy and port lines on the default apn that it set up.
--Matt
mkosem said:
I spoke too soon. Speed tests were sort of working for me initially, but is working properly now after just blanking out the proxy and port lines on the default apn that it set up.
--Matt
Click to expand...
Click to collapse
I will try this out soon. Thanks mate
Sent from my HTC One X using xda premium
Removing the proxy and port seemed to get the same results as the phone APN.
Thanks for this, it solved my issue for my HOX too.
Hello!
I need some help with my internet connection. The problem is that whenever the 3G-symbol is displayed in the statusbar, the connection doesn't work at all but when I have "H" it works perfect. Wifi also works perfectly.
I live in Sweden and use Halebop as my courier and I've talked to them and they sent me a new sim-card but that didn't work.
And I have this problem wherever I am so it shouldn't be a disturbance in just my area.
Thank you for helping!
Sent from my Galaxy Nexus using xda app-developers app
Hmm well the the way UMTS/HSPA+ work, the phone sits at "3G" (UMTS) when the connection is idle, ready to receive power for a connection. When an active data session is started, it switches (quickly) to HSPA+ and makes the transfer, then goes back to UMTS once its no longer receiving or sending data. The phone shouldn't ever sit at "3G" and try to transfer data unless you're connected to towers w/o HSPA+.
It does this because UMTS is a much lower power draw than HSPA+. It'd negatively affect battery life for the phone to stay on HSPA+ at all times.
What you may be experiencing (based on what you say) is your carrier + phone just being a little slow switching from UMTS to HSPA+ when you start a data session. If there's a long enough delay that webpage loads are timing out or apps aren't loading, that's not right. At that point I'd lead to you to check your APNs and other network settings.
Thank you for your response!
Well, I'm not an expert at network issues which is why I asked the question. And therefore I don't know if anything is wrong in the settings.
I have taken some screenshots, maybe you could tell if somethings wrong.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Galaxy Nexus using xda app-developers app
Post a picture of the settings in Telia SE APN.
/Edit:
Here is the settings that should be in your Telia SE WAP apn.
Code:
För Android:
Mobilsurf
1. Inställningar
2. Trådlöst & nätverk
3. Mobila nätverk
4. Åtkomstpunktsnamn
5. Meny knappen, nytt APN
Fyll i följande:
Namn: Halebop
APN: halebop.telia.se
Skippa: användarnamn, lösenord, MMSC, MMS-proxy och MMS-port.
MCC: 240
MNC: 01
Skippa: autensieringtyp
APN-typ: default
6. Klicka på menyn & spara
MMS
1. Inställningar
2. Trådlöst & nätverk
3. Mobila nätverk
4. Välj de APN som heter något med "SMS".
Fyll i följande:
Namn: Halebop MMS
APN: mms.telia.se
Skippa: Proxy, port
Användarnamn: mms
MMSC: http://mmss/
MMS-proxy: 193.209.134.132
MMS-port: 8080 MCC: 240
MNC: 01 Skippa: autentsieringstyp
APN-typ: mms
6. Klicka på menyn & spara
Thank you!
I will test this!
This is how it looks now:
Sent from my Galaxy Nexus using xda app-developers app
And this is it now after I made the changes you mentioned.
But There were no apn called something "SMS" So I created a new apn called Halebop MMS, are There any problems with that?
I have one question though, what is APN and what did these changes do to fix the problem? Just interested.
Thank you very much! I think this worked!
Sent from my Galaxy Nexus using xda app-developers app
APN tells your phone where to connect to get internet access (You can see it as on your local network your PC will connect to default gateway when trying to access the internet).
Read Here if you want to read up on this
Thank you very much
Do you know any good site where a noob like me could learn some more about Android, flashing, ROMs, kernels, yeah well pretty much anything related to that subject?
Sent from my Galaxy Nexus using xda app-developers app
Sime3134 said:
Do you know any good site where a noob like me could learn some more about Android, flashing, ROMs, kernels, yeah well pretty much anything related to that subject?
Click to expand...
Click to collapse
You're on just such a site.
Well yeah
Sent from my Galaxy Nexus using xda app-developers app
Haven't been able to get an answer on the thread. I'm running MIUI V5 and it runs great except that the MMS doesn't work. My 3g data works fine , I just can't send or receive MMS. Is there anything I can do about this? I'm running on PagePlus (CDMA) with no sim.
Sent from my Nexus 7
Check your APN settings
Sent from my ADR6350 using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not sure where to go from here. This is under the MMS heading in Mobile Networks settings. The APN is TEST.
Sent from my Incredible 2 using Tapatalk
ive flashed this rom before on my dinc2 and i had the same problem. the way to fix it is go to the google play store and download apn setting shortcut. to use the shortcut ull need to instal another launcher. holo or adw will work fine its just temp. then add the shortcut to the screen then open it. set up ur apn settings the name is VERIZON. apn is internet. the mmsc is www.mms.vtext.com/servlets/mms once you get that set up go into ur regular apn set and set the same thing to that one but leave everything else as is, then save. then reboot your phone. after that your mms should work. its a long process but its the only thing i got to work. hope it works for you.
I well definitely try this! Thanks
Sent from my Nexus 7
jam0688 said:
ive flashed this rom before on my dinc2 and i had the same problem. the way to fix it is go to the google play store and download apn setting shortcut. to use the shortcut ull need to instal another launcher. holo or adw will work fine its just temp. then add the shortcut to the screen then open it. set up ur apn settings the name is VERIZON. apn is internet. the mmsc is www.mms.vtext.com/servlets/mms once you get that set up go into ur regular apn set and set the same thing to that one but leave everything else as is, then save. then reboot your phone. after that your mms should work. its a long process but its the only thing i got to work. hope it works for you.
Click to expand...
Click to collapse
It still just hangs when downloading or sending.
Sent from my Nexus 7
Hmm try creatong a new apn in ur regular apn settings along with the other and see if that works. If not maybe try reflashing.
The only way I was able to get it to work, was to disable MMS.apk through titanium, And set up the APN through GOSMS, but then I could only send, not receive. I wouldn't receive a text at all that had a picture.
Sent from my Nexus 7
Well that wont work. R u trying to usebit cuz u like miui style or bec its jellybean?
I got it to work perfectly on miui using gosms and a different APN I found somewhere.
Sent from my Nexus 7
Osiris19 said:
I got it to work perfectly on miui using gosms and a different APN I found somewhere.
Sent from my Nexus 7
Click to expand...
Click to collapse
Thats kool i never tried go sms with it but i guess all that matters is its working for you. Its a great rom tho if u can get past the little bit of chinese thats still on it.
jam0688 said:
Thats kool i never tried go sms with it but i guess all that matters is its working for you. Its a great rom tho if u can get past the little bit of chinese thats still on it.
Click to expand...
Click to collapse
Hey if u start having problems with go sms i figured out exactly what i did to get mms working in the regular text messages. When innapn settings shortcut go down to mms at the bottomwhere it says test and set the apn settings in it the same as the regular apn settings and then go down to proxy server in both of them and leave it blank then make sure u save both then do a reboot and ur mms should workjust fine. I went ahead and switched back to it and got it set up the way i like it. I realized i was missing miui style and ios7 style but dont wanna pay all that money for an iphone lol plus nothing beats the custimizations of android. Hope this helps this time. Worked for me buddy.
There is a pretty big bug with the new G3 that breaks international data roaming. This means your free international data will not work unless you follow the instructions below.
Before you leave the country with your G3, you must add a new APN that you need to use while abroad. If you try to roam with the built-in APN, you will get NO data.
Create a new APN and use the following values:
Code:
Name: Roaming APN (or whatever you want)
APN: epc.tmobile.com (no dash)
MMSC: http://mms.msg.eng.tmobile.com/mms/wapenc
APN Type: default,supl,mms
APN Protocol: IPV4
You can leave everything else empty or with the default values.
When you reach your destination (or before you leave), activate the new APN by making sure the bullet point is selected. To avoid issues, you should also change your Network Mode to "GSM/WCDMA Auto".
When you return, make sure you switch your Network Mode back to "GSM/WCDMA/LTE Auto" and activate the built-in "T-Mobile LTE" APN.
If you don't have data while in the US, make sure the epc.tmobile.com APN is not selected while GSM/WCDMA/LTE Auto is enabled. This combination will leave you WITHOUT data in the US. Using fast.tmobile.com as the APN and configured as IPV4 only will also leave you without data.
You should merge this on the post right above this one with same complaint
BACARDILIMON said:
You should merge this on the post right above this one with same complaint
Click to expand...
Click to collapse
I think it's better to keep this separate and make it a sticky. It's clearer for anyone looking for help on why their international data isn't working.
I hope the mods will agree.
Nice tip, thanks for posting it.
I leave for Canada in a couple of weeks, so this will come in handy. Glad I saw this post. :good:
Ty ty ty posting this. Been in Canada for two days without data and this fixed it!
Sent from my LG-D851 using XDA Free mobile app
Not working for me on CAN Rogers in Ontario - I did exactly as instructed, but no luck.
at the same time, data working 100% on wife's G2
levchikb said:
Not working for me on CAN Rogers in Ontario - I did exactly as instructed, but no luck.
at the same time, data working 100% on wife's G2
Click to expand...
Click to collapse
Hmm. Others have been able to get data working with Rogers and the mod. Did you activate the new APN?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@havanahjoe - yes i did activate it. It did not work. I'm planning to return this to tmobile. I plan to travel more and it's real pain in the @$$.
how
mrzood said:
Ty ty ty posting this. Been in Canada for two days without data and this fixed it!
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
How exactly did you get this to work? I'm in Canada and I can't get any data. I followed the above instructions but no luck.
---------- Post added at 05:55 PM ---------- Previous post was at 05:39 PM ----------
levchikb said:
@havanahjoe - yes i did activate it. It did not work. I'm planning to return this to tmobile. I plan to travel more and it's real pain in the @$$.
Click to expand...
Click to collapse
Actually, it worked for me. Make sure you use ipv4 and not ipv4/ipv6. Copy and paste the MMSC to make sure you put it in right.
THANKS OP!