Car mount and flip cover - Galaxy Note GT-N7000 Accessories

I'm looking for car mount for my new note, i had Nokia universal car mount what i used with my desire, but that is too small for my new phone.
I really like note flip cover and Samsung original car mount doesn't work..
I looked for amazon and found this:
http://www.amazon.co.uk/Twist-Phone...CH32/ref=sr_1_3?ie=UTF8&qid=1340797760&sr=8-3
Is that good, will that work with note flip cover and will the suction hold? It's pretty cheap, so don't know if it's any good
If you have any car mount that you have used with flip cover, please share
EDIT:
Racle90 said:
Got suggestion of http://www.amazon.co.uk/gp/product/B003ULP9A2 in IRC and price was pretty good, so I bought that, I'll let you know how that worked out
Click to expand...
Click to collapse
Racle90 said:
Got my car mount today and it's fits really well it's place. It's very sturdy. Pad stick really well to phone also. Got advice from IRC before i bought that, so just use wet rag to swipe that in some times and it should work like new. Also you can wash that under water if you like.
Click to expand...
Click to collapse
Also another suggestions
markhind said:
I use the Mountek Car Mount, cd slot mounted.
The flip cover is folded around the back which isn't ideal but it works fine. The power cable going through the bottom base helps with securing the whole unit into the mount.
Click to expand...
Click to collapse
Chromwell said:
I use the original FlipCover and CARMount from Samsung without any serious trouble. If you want to make it fit perfectly you just have to cut out a small amount of the Leather...
Click to expand...
Click to collapse

I use the Mountek Car Mount, cd slot mounted.
The flip cover is folded around the back which isn't ideal but it works fine. The power cable going through the bottom base helps with securing the whole unit into the mount.
After trying a few mounts this works the best for me.
Sent from my GT-N7000

yeah i read about CD mount also, but that isn't going to work with me, my radio is behinf the front panel, so it's pretty deep in there compared to normal setup (2din radio, ~1.7din slot... it was fun when i noticed that...).

Got suggestion of http://www.amazon.co.uk/gp/product/B003ULP9A2 in IRC and price was pretty good, so I bought that, I'll let you know how that worked out

I use the original FlipCover and CARMount from Samsung without any serious trouble. If you want to make it fit perfectly you just have to cut out a small amount of the Leather...

Got my car mount today and it's fits really well it's place. It's very sturdy. Pad stick really well to phone also. Got advice from IRC before i bought that, so just use wet rag to swipe that in some times and it should work like new. Also you can wash that under water if you like.

Related

Car mount

So it's time to find a car mount for the SGS2.
For the HD2 I used an air vent mount (this). I don't like the windscreen suction mounts (just my preference, even though they tend to be more flexible in terms of positioning the device), and the positioning of the air vent mount is almost perfect in my car. The only thing that is a little annoying is that the fixed one obviously don't allow any turning at all, which can be annoying when it's sunny as I'd prefer to have the screen point more directly at me.
Therefore I'm looking for an air vent mount that has some sort of swivel included - basically something similar to this for, or perhaps something more generic like this or this.
Has anyone used any of these (or the windscreen suction mount equivalents) from either Ultimate Addons or Arkon? How well made and durable are they? How well do they hold their position?
Are there other ones I've missed that I should consider?
Thanks in advance for any input!
I'm looking for the same thing, preferably specific to the S2 (much better to slip it into a custom holder, rather than placing it in a generic one then tighten the grips etc).
Something like this (no link allowed.. see gripmount on mobilefun) on the air vent would be great.
I also like vent holders! I just buy a cheap generic one and modify it to fit my needs.
Obviously this involves taking apart my vent and drilling holes in the phone holder, put you get just the thing you need! Plus its also wayyyy more stable as you use cable ties to get it solidly in place.
The mounts that usually come with the vent holder are flimsy and usually end up falling off!
The gripmount on mobilefun looks great, but I can't see how it manages to fit the SGS2 both with and without a case! I'm using a silicone skin with mine and would rather have something that will work without me having to take it on and off. Is the mount slightly bendy so the phone just clips in? Anyone got any experience of these?
I've decided to just hold fire until the official Samsung mount comes out - it looks pretty good on their website and I can order the desktop dock at the same time.
Breffo multi-fuctional Car-dock/Cradle
I saw this product last year and thought this might be interesting?! My apologies for not yet have those for review, didn't need it yet. But when i have a car this i would definitely buy.
The brand is Breffo and the product is Spiderpodium, there website is www.breffo.com
Interesting idea . . . on fleabay for £13 (item 200603319280)
Might pick one up and see how it works as a vent holder . . .
Edit: The reviews are great, so ordered a black one off ebay. There are white ones for just £8 on Amazon if you're not fussed about colour! Will return and let y'all know how well it works . . .
Spiderpodium looks superb, definitely getting one of those. One of the ebay sellers is only around the corner from me, so I've contacted to ask if I can collect. Will report back once I've got hold of one.
I've made my own:
robbiekhan that looks awesome, good work. How much would you charge to make more had to ask lol
It's simple case (hah!!) of sticking and cutting a few bits together really so i couldn't charge to do such a thing as you'd be much better off doing it lol, plus it's fun, something you've made and it can be a conversation piece
My HTC Desire mount DIY article can be found on LifeHacker, method is exactly the same, just omit anything Desire for Galaxy S II
http://lifehacker.com/5593245/build-a-custom-phone-car-mount-for-under-10
Looks so cool! What case did you use - the one from ebay you mentioned in the other tread?
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Yup same case!
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Click to expand...
Click to collapse
That looks very good actually! Going to buy! If anything it means I don't need to take my phone out of the case
I'm going to pick up a Griffin Windowseat I think, as I need something compatible with other phones too.
I have got one one the magic mounts (aka Dash Genie), but due to the textured back the SGS2 doesn't stick
If you wanted universal vent mount, have a look at this by Herbert Richter. If you however want a device specific, and if you want a small project, than I see that Brodit holder for Samsung Galaxy S II seems to be listed, you can covert this into a vent mount or windscreen suction mount using this adaptor plate.
Nice - thanks. For now I decided to take a punt on the £8 white Spiderpodium for its uniqueness - when it arrives I'll see how well made and durable it is, and if that doesn't work out I think a custom/self-made solution might well be the way to go.
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
Click to expand...
Click to collapse
Looks good and cheap enough!
Mine arrived this morning, check out a quick review and a couple of pics here
Summary: great! Will probably get another one, in fact
robbiekhan said:
I've made my own:
Click to expand...
Click to collapse
Looks very good!
Let's see if I can make one myself
Yufina said:
Just bought this: http://www.dealextreme.com/p/car-windshield-mini-holder-swivel-mount-for-cell-phone-5-0-7-5cm-41529
It's just under 4€ :O So you can't go wrong whit it.
http://youtu.be/ZR5oWIzW_Ns
EDIT: Also this might be interesting too: Mini Car Cigarette Powered 1000mA USB Adapter/Charger
Click to expand...
Click to collapse
I wonder if this will work if you attatch it to the windshield...
On the left of the SGS2 there are the volume buttons. And the miniholder, is really, ehhhh, mini... So I think the phone will hit the window, or if you place it in the holder in a way the phone does not hit the window the volume buttons will be pressed all the time...

OEM car mount review

Hey guys,
So im still wondering which one is the best car mount for me...my car has limited spots where to put it but I got this as a gift so cant complain hehe
I made a review as I always do with my products
Hope this helps you choose the right one for you
http://youtu.be/x8XNr7A91j0
Does the mount scratch up the bezel of the phone?
did u make this review? i don't see the phone being removed from the dock. that's my only issue with the dock. it's not that easy to take the phone off.
vw671 said:
Does the mount scratch up the bezel of the phone?
Click to expand...
Click to collapse
No,
the way the phone goes in you dont have any hard contact with the bezzel and also its ruberized on the corners. The back part of hard plastic but there is no movement of the phone so scratches will be minimal..Be sure of course to check for hard particles before putting your phone
dn3g3l said:
did u make this review? i don't see the phone being removed from the dock. that's my only issue with the dock. it's not that easy to take the phone off.
Click to expand...
Click to collapse
Yes , this is my review ..In the first part of the review when I put it in the table you can see me putting it in and out IIRC.
Indeed taking it out is not the easiest task as it is plugged into the charging port, however the benefit of it is the fact that you are minimizing cables and wires . When you pull out the part of the charger the removal is easy and the suction cup is strong enough to keep it in place
I rather it be locked in securely tho..However, as I explain on the video, there are better options out there with more mobility and same performance
i'm pretty sure removing the phone from the cradle got cut off. i saw you put the phone into the cradle 2 or 3 times but not removing it. just wanted to know if you have to push back on the tab really hard to kinda pop the phone out from the top part. everytime i try removing it, it seems like i'm not doing it correctly and will break it.
rault18 said:
Yes , this is my review ..In the first part of the review when I put it in the table you can see me putting it in and out IIRC.
Indeed taking it out is not the easiest task as it is plugged into the charging port, however the benefit of it is the fact that you are minimizing cables and wires . When you pull out the part of the charger the removal is easy and the suction cup is strong enough to keep it in place
I rather it be locked in securely tho..However, as I explain on the video, there are better options out there with more mobility and same performance
Click to expand...
Click to collapse
What are the better options out there for car mounts for this phone?
thanks
Did he say 49.99 or 14.99?
49.99 plus tax
Thanks for the review I went ahead and ordered one from Amazon $34 shipped.
dn3g3l said:
i'm pretty sure removing the phone from the cradle got cut off. i saw you put the phone into the cradle 2 or 3 times but not removing it. just wanted to know if you have to push back on the tab really hard to kinda pop the phone out from the top part. everytime i try removing it, it seems like i'm not doing it correctly and will break it.
Click to expand...
Click to collapse
oh im sorry well to be honest pushing was not that hard..yes there is resistance but not necesarely hard just be sure you are moving the bottom away first so the charging port doesnt go on an angle..the click you hear is more of the plastic getting in place than the charger getting in. It was slightly harder than removing a regular car charger. Just be careful when pushing the tab back and try to do it straight . The removing process should be exactly the opposite of the inserting one
$50 for a mount is too much. Although I love the phone and Google Navigation a lot, but it does get quiet hot while on GPS and charging at the same time. I will stick with my Garmin GPS.
Nice!
Great review! Thanks!! Saved me $50. This mount would have been a huge dissapointment for me and I was super close to getting it today. It's not like Samsung to skimp out on looks and functionality!?!
CincoDeDrinko said:
Great review! Thanks!! Saved me $50. This mount would have been a huge dissapointment for me and I was super close to getting it today. It's not like Samsung to skimp out on looks and functionality!?!
Click to expand...
Click to collapse
glad I was able to help! there are better ones out there..I will be trying to review some as well ..just waiting to purchase some hehe
I just dont understand why did samsung used so much plastic in the wrong parts!
It serves me perfectly.
The OEM Car Mount serves me really well.
I modified it with a vent mount because I did not want to install it to the glass.
After I put it to the vent, it works really well. It stays firmly even if I operate while I am driving. I do not have any problem to put or take out the phone from the mount even thou my phone has Ghost Armour Black Carbon.
Of course I have to use a force a bit to the tap, but no trouble to me.
After I got the mount, I have not used Garmin 1450LMT at all, so finally I sold it. The Car mount is the most useful accessory that I've purchased for the phone. I paid around $33 for the OEM mount & $2.50 for the vent mount from Amazon.com.
PS. Please excuse the dust in the vent. I was surprised when I saw the pictures. I think I need to detail the car very soon.
very well done sir! I like your custom mount option! The product is rock solid..however in my case I just needed more flexibility
I'm really digging the OEM navigation mount. Works wonderfully if attached to the windshield. But completely useless as a dash mount, don't know why they even give you the dash "puck" as there is not way in hell you can adjust it as a dash mount (*at least in a 4Runner).
But the BEST thing is the line-out capability in car mode!!! IT'S AWESOME!!!
I tried most phone mounts for the car and did not like them. I don't like the window mount as it obstructs your vision and leaves circles inside the front windshield. It is also too far away to touch the screen/phone as you drive. I didn't like the vent mount because during the hot Summer days, you have one less AC vent blowing at you. I recently bought the CD player slot mount and I LOVE IT! It places your phone a lot lower than the vent mounts and it fits a wide variety of phones. It is also more discrete to motorists around you and its way closer/easier to touch the screen. You just place your phone on it and squeeze the sides until it locks. Then you can tilt it to landscape, tilt it back and forward, and tilt it towards the left or right. When you are done, you just press the top rear and it opens up. It will fit our phone and even the Galaxy Note. Oh yeah I had to buy this as my 4.5" screen Samsung T989 did not fit my old vent mount that fit my G2X. I bought mine from a vendor through Amazon. Check out the 4.5 star rating from 134 customers. Its $19.95 with Free shipping.
http://www.amazon.com/Mountek-MT500...W3D4/ref=sr_1_1?ie=UTF8&qid=1325492429&sr=8-1
Is there a mount that I can place down by where the gear is? I don't want windshield or dash because they obstruct my view. I don't want vent mount because I need my vents for air conditioning and it's still a bit high. I can't do CD mount like the guy above posted because my cd slot is behind my built-in GPS which flips out to put CDs in.
Can anybody recommend a good mount or would any dash mount work for that situation. I'm thinking maybe putting it in the cup holder or nearby.
Here's my custom effort:

Better Car Mount or Holder for LG Nitro HD

After trying several car mount, I almost give up
http://www.amazon.com/Kensington-Qu...BEV4/ref=sr_1_1?ie=UTF8&qid=1332967645&sr=8-1
This is the one I am currently using. However, the lower part of the holder always touches the power down button, which mutes the GPS!
What car mount do you use?
ssoonngg123 said:
After trying several car mount, I almost give up
http://www.amazon.com/Kensington-Qu...BEV4/ref=sr_1_1?ie=UTF8&qid=1332967645&sr=8-1
This is the one I am currently using. However, the lower part of the holder always touches the power down button, which mutes the GPS!
What car mount do you use?
Click to expand...
Click to collapse
Just use a big binder clip. It's super cheap and works better than any holder I've tried from eBay.
http://lifehacker.com/5747897/how-to-build-a-car-mount-for-your-cellphone-from-office-supplies
I use the Samsung Car Dock for the GS2/Infuse 4G. I've removed the little cover for the micro USB port and the Samsung dock works perfectly; charges and keeps my Nitro HD secure.
SolusCado said:
I use the Samsung Car Dock for the GS2/Infuse 4G. I've removed the little cover for the micro USB port and the Samsung dock works perfectly; charges and keeps my Nitro HD secure.
Click to expand...
Click to collapse
Thanks for the hint! I am going to get one.
LG phone with Samsung Dock
996gt2 said:
Just use a big binder clip. It's super cheap and works better than any holder I've tried from eBay.
http://lifehacker.com/5747897/how-to-build-a-car-mount-for-your-cellphone-from-office-supplies
Click to expand...
Click to collapse
Is our Nitro HD too heavy to be hold by the "thin" holder?
ssoonngg123 said:
Is our Nitro HD too heavy to be hold by the "thin" holder?
Click to expand...
Click to collapse
Nope, my Nitro HD + TPU case works fine with a 2" binder clip in a Honda Accord. I've used it as a GPS on 4 hour drives and it was much more stable than a windshield-mounted holder with a flexible arm.
ssoonngg123 said:
Thanks for the hint! I am going to get one.
LG phone with Samsung Dock
Click to expand...
Click to collapse
I know; who'd have thought?
This isnt the exact same one i purchased, but it looks extremely similar to it. The padded arms that hold the sides or the top and bottom (you can rotate it while its mounted) are individually adjustable so its easy to position them out of the way of buttons while leaving the buttons fully accessible, and the phone secured perfectly.
It comes with two attachments, one allows you to hook it to your heater vents and the other is the window mount.
The window mount is not very long, but very sturdy! This is what i currently use in my car. The vent mount is very nice and sturdy, but it seems its meant to permanently attach to the vents. I first tried to use it since it keeps it out of my window area, but because of the way my vents are setup in my car, it pointed the phone in a bad direction and there's no left-right adjustments that you can do other than the normal movement from the room available from the clips, so upon trying to correct it, the two mounting clips broke and its no longer usable.
Either way, it works out perfect! But again, the one listed is only close to the one i purchased. I picked that one to list though because its from radio shack, where i purchased mine. I went out to the car and there's not a single branding label on it anywhere! crazy..
http://www.radioshack.com/product/index.jsp?productId=3386930#
996gt2 said:
Just use a big binder clip. It's super cheap and works better than any holder I've tried from eBay.
http://lifehacker.com/5747897/how-to-build-a-car-mount-for-your-cellphone-from-office-supplies
Click to expand...
Click to collapse
That's just ghetto...Ghetto FABULOUS!!
Just so happens the big binders and strong rubber bands are items available at my work supply closet! The only thing better than a DIY project is a DIY project with parts you can get for free!
996gt2 said:
Nope, my Nitro HD + TPU case works fine with a 2" binder clip in a Honda Accord. I've used it as a GPS on 4 hour drives and it was much more stable than a windshield-mounted holder with a flexible arm.
Click to expand...
Click to collapse
Namuna said:
That's just ghetto...Ghetto FABULOUS!!
Just so happens the big binders and strong rubber bands are items available at my work supply closet! The only thing better than a DIY project is a DIY project with parts you can get for free!
Click to expand...
Click to collapse
Namuna, have u or anybody else here tried the modified binder clip? I'm currently trying to make one, but I realize that the "arms" seem to be a bit too short to hold it in place. Either it will slip of the top arm or the bottom one every now and then. I've curved them slightly more upwards to give it more of a hold, but it doesn't seem to wanna hold. I wonder if we replace the body of the binder clip with a smaller one and just use the longer arms whether it will work better?
996gt2, would you mind posting a pic or two to show how it looks with yours? Mine just seems to barely hold it, and constantly slips off the arms.
I've found that the Garmin Nuvi 200 mounts like this http://www.ebay.com/itm/Car-Windscr...ers_Mounts&hash=item3a6b7428f1#ht_1996wt_1163 work great with no modification with my body glove dimensions case on, easy to slip the phone in and out of it.
I've also used this same mount on my previous phones with slight modifications (Motorola Photon 4g and Samsung Captivate) which involves using a lighter to melt the sides to the right size.
Also this one looks like it would do the trick http://www.ebay.com/itm/GENUINE-ORI...ers_Mounts&hash=item1c2690c51d#ht_11995wt_905
0mfgroflmao said:
I've found that the Garmin Nuvi 200 mounts like this http://www.ebay.com/itm/Car-Windscr...ers_Mounts&hash=item3a6b7428f1#ht_1996wt_1163 work great with no modification with my body glove dimensions case on, easy to slip the phone in and out of it.
I've also used this same mount on my previous phones with slight modifications (Motorola Photon 4g and Samsung Captivate) which involves using a lighter to melt the sides to the right size.
Also this one looks like it would do the trick http://www.ebay.com/itm/GENUINE-ORI...ers_Mounts&hash=item1c2690c51d#ht_11995wt_905
Click to expand...
Click to collapse
So r u currently using that very Garmin nuvi mount? And it holds the phone nicely and stably? I find that sometimes these mounts lean sideways when I have both power n 3.5mm jack plugged in. If u r using the mount pls take a pic of the phone in the mount so I can see how well it holds it. For that price, if it works well, I'd rather go with that. I'm spending way more already with the DIY mount clip lol.
Sent from my LG-P930 using xda app-developers app

The Perfect Vehicle Dock That Works With A Case?

In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
Thanks, never seen one that slides into the CD slot. Btw...that link said for iPhone 4S.
SamsungVibrant said:
Any suggestions?
Click to expand...
Click to collapse
http://www.slipgripcarmounts.com/Galaxy-S-III-I9300_c_27331.html
And chose one for you. I've ordered this one http://www.slipgripcarmounts.com/Sl...Using-OtterBox-Commuter-Case---_p_130841.html yesterday cause I've had the same one for my Fascinate for almost 2 years. Perfect fit and very good quality.
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
That's really cool!
Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
That looks really cool. Does it go it and out of the CD player easily? Do you just leave it there or is it easy enough to quickly plug in when you want?
Does it still "see" the satellites well enough from the lower position in the car?
I assume you can confirm the GS3 fits well in it even though it says it's for iphone?
Anyone know of other CD mounts to compare to?
Amazon review for this one you got are generally very good.
http://www.amazon.com/Mounteks-Universal-Hands-Free-Devices-Magellan/dp/B004E5W3D4
Best car holder I've ever had!
Don't know if people just don't know about these or just don't like them. I got mine back in February and used it on my old E4GT and now the S3, I absolutly love it! The key is, for me anyways, getting a TPU case( always use TPU so no biggie there ) take an exacto knife and cut a perfect sized cut out for the tiny magnet. If you do it correctly the looks isn't bad at all( use the small magnet, works fine for me ) and more importantly it wont 'wobble' on the table, lays flat. Sorry don't have any pics of my old setup and haven't cut out my new one yet. Also, nice that we have replaceable back covers in case you're worried about it marring up the back if you want to remove it later.
As far as construction quality, magnet hold strenght both are superb, haven't hadd one inceidentl fall off the holder. Also magent doesn't seem to interfer with wifi or cell at all. NFC I haven't tested yet, but my suggestion would be to mount it towards the top side of the case away from the battery( like were the carrier logo is on the back )
Anyways just my 2 cents, check out youtube they have a couple good reviews of it on there.
http://eshop.tetrax.us/
I can't post pics/links but I followed Lifehacker's guide to making a car mount out of office supplies (site should be easy to find with that information). It works surprisingly well, even with the size of the S3 and the fact that my vehicle's vents aren't perfectly suited for the application. I thought it'd be kind of ghetto but it's hidden while in use and easy to remove and stash away when not in use.
I'll make a thread with pics once I have enough posts.
I got this one: http://www.amazon.com/SLIM-GRIP-WIN...CAR-STEREO/dp/B004H4FN6Q/ref=cm_aya_orig_subj
http://forum.xda-developers.com/showthread.php?t=1769055
Take your time and look around. There's plenty of car mounts that will fit this phone with a case.
Seems like most are the suction cup kind
will work for any phone even tablets
Sorry long time forum reader but first time posting. I can't post a link but search "soundgate m2 car mount"
You can probably find them cheaper. Used my for the og dinc for 2 years. I put the disc on my case instead of the phone. But I would have no reservations to put it directly on the phone as the disc is extremely unobtrusive. Just clean the spot you want to mount the arm really well with included wipe or rubbing alcohol. The arm mounts with a 3m adhesive pad and folds almost flush when not in use. Very slick. Put the discs on anything you want to dock to the arm. I forget how much weight it can handle but I saw a tablet being used as well. Sorry tried to upload pictures and after an afternoon of searching the forums on how to do it, i still cant get it. Just google "soundgate m2 car mount" you wont be dissapointed.
I have this one. I love it. Works with any case, holds tight. I have mine in the vents. http://www.breffo.com/collections/spiderpodium
lynseyw said:
I have this one. I love it. Works with any case, holds tight. I have mine in the vents. http://www.breffo.com/collections/spiderpodium
Click to expand...
Click to collapse
That looks interesting, never seen that before. How do you put that in your vent? Looks like it wasn't designed for that.
SamsungVibrant said:
That looks interesting, never seen that before. How do you put that in your vent? Looks like it wasn't designed for that.
Click to expand...
Click to collapse
you just kinda put it in the vents, and then bend it down. works great! It really stays put too. Check out the gallery section on the site, there are other pics of it in the vents. Got one for a friend and he loves it. It really does hold tight in the vent, even more so then ones designed for the vent. Easy to take out too
lynseyw said:
you just kinda put it in the vents, and then bend it down. works great! It really stays put too. Check out the gallery section on the site, there are other pics of it in the vents. Got one for a friend and he loves it. It really does hold tight in the vent, even more so then ones designed for the vent. Easy to take out too
Click to expand...
Click to collapse
Can I order if I live in the U.S.? Also I don't see the gallery.
lexluthor said:
That looks really cool. Does it go it and out of the CD player easily? Do you just leave it there or is it easy enough to quickly plug in when you want?
Does it still "see" the satellites well enough from the lower position in the car?
I assume you can confirm the GS3 fits well in it even though it says it's for iphone?
Anyone know of other CD mounts to compare to?
Amazon review for this one you got are generally very good.
http://www.amazon.com/Mounteks-Universal-Hands-Free-Devices-Magellan/dp/B004E5W3D4
Click to expand...
Click to collapse
It goes in very easy. It only takes a few seconds to install. It holds the S III securely even with a case on it.
Here's a video:
http://www.youtube.com/watch?v=B8uy-XfhEqQ&feature=related
Maverick777 said:
It goes in very easy. It only takes a few seconds to install. It holds the S III securely even with a case on it.
Here's a video:
http://www.youtube.com/watch?v=B8uy-XfhEqQ&feature=related
Click to expand...
Click to collapse
Does it hold the phone in the vertical position, or only horizontal?
RubenRybnik said:
Don't know if people just don't know about these or just don't like them. I got mine back in February and used it on my old E4GT and now the S3, I absolutly love it! The key is, for me anyways, getting a TPU case( always use TPU so no biggie there ) take an exacto knife and cut a perfect sized cut out for the tiny magnet. If you do it correctly the looks isn't bad at all( use the small magnet, works fine for me ) and more importantly it wont 'wobble' on the table, lays flat. Sorry don't have any pics of my old setup and haven't cut out my new one yet. Also, nice that we have replaceable back covers in case you're worried about it marring up the back if you want to remove it later.
As far as construction quality, magnet hold strenght both are superb, haven't hadd one inceidentl fall off the holder. Also magent doesn't seem to interfer with wifi or cell at all. NFC I haven't tested yet, but my suggestion would be to mount it towards the top side of the case away from the battery( like were the carrier logo is on the back )
Anyways just my 2 cents, check out youtube they have a couple good reviews of it on there.
http://eshop.tetrax.us/
Click to expand...
Click to collapse
wow that's nice! Why did you have to cut out a hole in your case, the link says it comes with a case (I'm assuming with the magnet attached)!
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
ProClip. It is a little more money, but well worth it. I would get the proper mount for your vehicle (vent or side mount) and the adjustable phone mount so you can use it with a case. The also make a clip so you can move the mount from car to car.
Sadly, mine was recently stolen, but they offered me a discount because of my loss.
So I created a ghetto version as a sort of joke in exchange.
http://m.youtube.com/watch?v=jH3XoLqfXsY
www.proclipusa.com
SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
I use this one and I love it.. http://www.amazon.com/MSW-Exogear-Exomount-Universal-Mount/dp/B004Z8ZLOS/ref=sr_1_1?ie=UTF8&qid=1342868939&sr=8-1&keywords=exogear+car+mount

Dashboard/Windshield Mount?

Has anyone found a mount that holds the phone securely (in a case), that doesn't shake too much, and does not push any of the phone's buttons?
Ram mounts are pretty nice.
Http://www.rammount.com
Sent from my LG-D800 using xda app-developers app
Hi
I didn't find any phone car holder for LG g pro
Personally i love my iOttie mount. It connects quickly and holds tight and then easy to get out. Holds it securely without feeling like I'm going to break something (mount or phone) because its spring loaded with a button that "grabs" the device and holds it. The XL size holds my LG and my gal's 4.5" Motorola, its a bit to big for your iPhone friends.
I bought mine on ebay for like 19.99
http://www.iottie.com/Product/ProductDetail.aspx?ProductID=947&ProductType=321
dx.com/es/p/car-windshield-360-degree-rotation-mount-holder-for-lg-optimus-g-pro-f240k-black-226225#.UtZpdZ55MUw
This is my DIY method of mounting the OGP on my air vent using the head of a windscreen mount. The OGP with the case is pretty heavy and the suction cup can't keep it firmly especially in an off road situation so I decided to make this mount out of a piece of sheet metal. All I can say it is sturdy as hell. So if you like tinkering at home it can be a nice weekend project...
dantheman68 said:
Personally i love my iOttie mount. It connects quickly and holds tight and then easy to get out. Holds it securely without feeling like I'm going to break something (mount or phone) because its spring loaded with a button that "grabs" the device and holds it. The XL size holds my LG and my gal's 4.5" Motorola, its a bit to big for your iPhone friends.
I bought mine on ebay for like 19.99
http://www.iottie.com/Product/ProductDetail.aspx?ProductID=947&ProductType=321
Click to expand...
Click to collapse
That mount looks like it would press the volume buttons. Any issue with that? just to make sure, you have Model No: HLCRIO101 , correct?
Also, do you have yours hanging from the windshield or mounted to the dash? I'm looking to hang it, with the phone in landscpae. Any issues with it falling out in landscape mode?
burton158 said:
dx.com/es/p/car-windshield-360-degree-rotation-mount-holder-for-lg-optimus-g-pro-f240k-black-226225#.UtZpdZ55MUw
Click to expand...
Click to collapse
Do you actually have this mount, or are you just suggesting it? If you do have it, any issues with the buttons or shaking or anything, and will it hold the OGP in a hybrid case? Also, it's designed to have the home button on the left. For those apps that only want to display in one particular direction when in landscape, that would make me have to flip the holder over, with the single tab on the bottom and the two holder up top. Any issues with the phone not staying in the mount if flipped over in this way?
Pallcsa...I realize you made the bracketry, but what mount is it that you are using to hold onto your phone's case? Also, what app is that, that gives your lean angles?
andygold said:
Do you actually have this mount, or are you just suggesting it? If you do have it, any issues with the buttons or shaking or anything, and will it hold the OGP in a hybrid case?
Click to expand...
Click to collapse
I bought it cuople of weeks ago. Didn´t have the opportunity to try it. But I inserted the OGP to try and fits perfect, so i don´t think it will fit with any cover (as any other smartphone with car holder i had).
dropbox.com/s/0jwk73048xh4f9z/20140119_010100.jpg
dropbox.com/s/umsvjk695bu4q1o/20140119_010036.jpg
Ahh... Yes, you must put the power button side downwards. It just reboot my phone
andygold said:
That mount looks like it would press the volume buttons. Any issue with that? just to make sure, you have Model No: HLCRIO101 , correct?
Also, do you have yours hanging from the windshield or mounted to the dash? I'm looking to hang it, with the phone in landscpae. Any issues with it falling out in landscape mode?
Click to expand...
Click to collapse
It covers the buttons but doesn't "press" them. Mine hangs from the windshield. It's spring loaded but has soft pads and doesn't squeeze too hard but it sits in there secure, I use it in portrait mode exclusively with no problem.
andygold said:
Pallcsa...I realize you made the bracketry, but what mount is it that you are using to hold onto your phone's case? Also, what app is that, that gives your lean angles?
Click to expand...
Click to collapse
Well, as I said it was the head of a universal windscreen phone mount that I had laying around since it was too weak to hold that weight firmly. As far as the inclinometer app goes, you can download it from play store. Here is the link. https://play.google.com/store/apps/details?id=com.ojw.inclinlite&hl=hu
My OGP is in an Evtech Hybrid Case ( http://goo.gl/qZg5oX ) which is tough and hardy. I use a Dash Crab Duet car mount ( http://goo.gl/VKpBM8 ) with it. I offset the phone in the spring loaded jaw so no buttons are pushed. The mount attaches well to the dash or windshield and holds the phone securely in any position I gimble it to.
visionlogic said:
My OGP is in an Evtech Hybrid Case ( http://goo.gl/qZg5oX ) which is tough and hardy. I use a Dash Crab Duet car mount ( http://goo.gl/VKpBM8 ) with it. I offset the phone in the spring loaded jaw so no buttons are pushed. The mount attaches well to the dash or windshield and holds the phone securely in any position I gimble it to.
Click to expand...
Click to collapse
Wow! The Dash Crab Duet looks incredible, I will get it.
Thanks for the recommendation.
OP here. I ended up ordering the iOttie XL mount from Meritline:
http://www.meritline.com/iottie-one...for-galaxy-note-ii-galaxy-siv---p-102928.aspx
usually $19.99, but with coupon code MLCQ20XN it came out to $13.50 SHIPPED. Someone reviewed it for the OGP and said that the mount's holders touch the volume buttons but do not operate them, and that the phone in a case sits nice and tight. I should have it within the week and will report back any pluses and minuses of use.
I don't know if the coupon code is still good, but I guess you could try it if interested.
If this does not work out, I'll either mod it to make it work, or I might just try the Dash Crab Duet mentioned above.

Categories

Resources