Develop Bugs

Quick maybe stupid question.

I have been reading where people are getting the nightly CM7 builds. I was wondering first off how do I go about setting this up. Secondly does this wipe your setting every time? It would be a pain to have to setup the phone every day. Also I have ripped out the ADW launcher as I find the Go Launcher to be superior is this something that would be overwritten? Thanks in advance for the knowledge, still new to the forum and handicapped as far as knowledge base when it comes to this.

carsenj said:
I have been reading where people are getting the nightly CM7 builds. I was wondering first off how do I go about setting this up. Secondly does this wipe your setting every time? It would be a pain to have to setup the phone every day. Also I have ripped out the ADW launcher as I find the Go Launcher to be superior is this something that would be overwritten? Thanks in advance for the knowledge, still new to the forum and handicapped as far as knowledge base when it comes to this.
Click to expand...
Click to collapse
Nightly builds can be downloaded via ROM manager, you need to have a premium licence though or you can get them from here.
I theory all of your setting would remain the same, but sometimes nightly builds can be unstable and broken, but for the majority of the time you would not experience any issues.
Have you installed go launcher to system/app? If so you would lose this every time you flash because flashing a rom rewrites the system partition. But if you have just installed it like a normal app it still be there after you flash.
Hope this helps

cjward23 said:
Nightly builds can be downloaded via ROM manager, you need to have a premium licence though or you can get them from here.
I theory all of your setting would remain the same, but sometimes nightly builds can be unstable and broken, but for the majority of the time you would not experience any issues.
Have you installed go launcher to system/app? If so you would lose this every time you flash because flashing a rom rewrites the system partition. But if you have just installed it like a normal app it still be there after you flash.
Hope this helps
Click to expand...
Click to collapse
That helps immensely. I have attempted to purchase the full Rom Manager to no avail. It just sits in the verifying state. So I just returned it. If I dl it from the mirror I'll have to install from recovery not the rom manager because to install from a zip is also only in the premium license version.
As for the settings. I just installed the Go Launcher like any other app no special settings. So I should be good?

carsenj said:
That helps immensely. I have attempted to purchase the full Rom Manager to no avail. It just sits in the verifying state. So I just returned it. If I dl it from the mirror I'll have to install from recovery not the rom manager because to install from a zip is also only in the premium license version.
As for the settings. I just installed the Go Launcher like any other app no special settings. So I should be good?
Click to expand...
Click to collapse
To be honest your better not using rom manager and just doing everything manually in recovery, rom manager is known to on occasion cause issues. And yes if you flash a new nightly go launcher would still be there. Just do a nandroid first to be safe
What version of CM are you using at the moment?
[sig]stock gingerbread rocks[sig]

cjward23 said:
To be honest your better not using rom manager and just doing everything manually in recovery, rom manager is known to on occasion cause issues. And yes if you flash a new nightly go launcher would still be there. Just do a nandroid first to be safe
What version of CM are you using at the moment?
[sig]stock gingerbread rocks[sig]
Click to expand...
Click to collapse
At the moment I am just running the CM 7 release 7.0.2. It is running great. I'm running it in conjuntion with Pershoots kernel and couldn't be happier. Just thought it'd be nice to check out new builds every so often just didn't want to spend 2 hours reconfiguring my phone again.
As for using recovery, I may actually do that. I have been wanting to get more into the process and what not. Having to root the phone through ADB got me interested more in the inter workings of these little devices that run our lives.

carsenj said:
At the moment I am just running the CM 7 release 7.0.2. It is running great. I'm running it in conjuntion with Pershoots kernel and couldn't be happier. Just thought it'd be nice to check out new builds every so often just didn't want to spend 2 hours reconfiguring my phone again.
As for using recovery, I may actually do that. I have been wanting to get more into the process and what not. Having to root the phone through ADB got me interested more in the inter workings of these little devices that run our lives.
Click to expand...
Click to collapse
The reason I asked what verson you were on is because if you do start using the nightlys you can't then downgrade to a stable release with out doing full wipes. Due to nightys being 2.3.4 and stables being 2.3.3
CWM is fairly easy to use
Sent from an ice cream sandwhich

Actually just read the last couple pages of the nightly thread. They have a stable release of 7.0.3. Dling right now to check it out. Thanks for the knowledge.

cjward23 said:
The reason I asked what verson you were on is because if you do start using the nightlys you can't then downgrade to a stable release with out doing full wipes. Due to nightys being 2.3.4 and stables being 2.3.3
CWM is fairly easy to use
Sent from an ice cream sandwhich
Click to expand...
Click to collapse
Nevermind got it all figured out. Everything seems to be working and this build seems pretty stable.

[ROM] [Unofficial] AOKP | Milestone 6 | R3

Hello, I thought I would share this with anyone who might want it
This is for *only* the T-Mobile Galaxy S3 (SGH-T999)
I used CyanogenMod SGS3 device trees. Thank and donate to them for doing the work to bring AOSP to your phone.
Download Milestone 6 R3
Download Gapps
Code:
R3
- fixed phone calls
R2
- fixed camera
R1
- initial
Installation
Wipe data
Flash ROM
Flash Gapps
Reboot
Bugs
forcing camera to focus causes it to crash (reboot to fix)
connecting to PC issues as well it seems
Bugs:;

NICE!!!!! Been waiting for this. i have envied this on my buddie G Nexus for a while now. Thanks Roman

I love me some AOKP!!! Unfortunately, I'm using a Sprint SGS3. Any chance you'll be supporting our phones the way you did with the NS4G?

have been waiting for this.. now i can stop using TW... a BIG thanks!:good:

Just flashed this and it's working perfectly! Calls, sms, camera and everything else I've tested so far is flawless
Sent from my SGH-T999 using Tapatalk 2

elterible said:
Just flashed this and it's working perfectly! Calls, sms, camera and everything else I've tested so far is flawless
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
OP says camera crashes when click to auto focus. can you confirm this? also, does gps and recording video work for you?

Before I try to flash this rom. I want to know what is differant from this and the stock rom that came with the SG3 other than not having TW? I know I need to back up first. Are all the main features stripped out or are they still there? How safe and stable is it to flash?

Just to make sure, is this ICS or Jelly bean?

answer a few questions...
camera works, yes autofocus does not fc/crash
video recording works/ 720p (20 sec record and playback without probs)
GPS works, very fast lock
ICS 4.0.4
this rom is sweet!

rodrigos122 said:
Just to make sure, is this ICS or Jelly bean?
Click to expand...
Click to collapse
ICS. There isn't a JB build of AOKP yet.
Sent from my SGH-T999 using XDA Premium HD app

Just tried this and runs very smooth. The only issue I had was in Settings when I click on Storage, it just goes back to home screen. Also, Video Camera does force close. Other than that, everything seemed to run great.

I love how u guys are going toe to toe with cyanogen mod with the aokp project. U guys do good work!

Great, now I can't get past the Samsung Galaxy 3 boot screen. Now what??

Kilroy672 said:
Great, now I can't get past the Samsung Galaxy 3 boot screen. Now what??
Click to expand...
Click to collapse
hope you made a back up.... boot into recovery, wipe data/cache and restore a back up

I can't. It just stays there. It is vol up, power button and home button right? And yes I did a back up.
Nevermind. I'm in recovery. whew.
BTW why did this flash not work?

Kilroy672 said:
I can't. It just stays there. It is vol up, power button and home button right? And yes I did a back up.
Nevermind. I'm in recovery. whew.
BTW why did this flash not work?
Click to expand...
Click to collapse
could be a bad flash, its rare those happen though, i installed no problem but once i restored my apps and system settings with titanium backup i started getting force closes every second!! so ill wait till the next update but try downloading again and flashing again, could just be a bad flash

MMontanez347 said:
could be a bad flash, its rare those happen though, i installed no problem but once i restored my apps and system settings with titanium backup i started getting force closes every second!! so ill wait till the next update but try downloading again and flashing again, could just be a bad flash
Click to expand...
Click to collapse
Doing my backup now. Might try the CM9 tomorrow and see what happends. Thanks for the help. :good:

MMontanez347 said:
could be a bad flash, its rare those happen though, i installed no problem but once i restored my apps and system settings with titanium backup i started getting force closes every second!! so ill wait till the next update but try downloading again and flashing again, could just be a bad flash
Click to expand...
Click to collapse
Strange you guys are having these issues.. My flash went smoothly, and I've been geekin out on this since I flashed and and ran my battery from 100 to 15 without a single issue. I would reflash...
Sent from my SGH-T999 using Tapatalk 2

capcanuck said:
Strange you guys are having these issues.. My flash went smoothly, and I've been geekin out on this since I flashed and and ran my battery from 100 to 15 without a single issue. I would reflash...
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
On a off subject. I can't figure out why I can't see my sdcard through revovery? Any ideas why not?

Kilroy672 said:
On a off subject. I can't figure out why I can't see my sdcard through revovery? Any ideas why not?
Click to expand...
Click to collapse
if your using the official CWM that just came out for the GS3, that CWM dosent have external sd card support, you have to use V4 of CMW (this one)

New Radio (Firmware Update)

Now that the new update has been leaked we have new firmware with a new radio (.0320). Has anyone seen any differences between this one and .0312, the previous newest radio? Would it be worth it to flash the new firmware if I was running a custom rom (jelly bean paranoid android)?

I just realized this should probably be in q and a. Can this be moved?
Sent from my Incredible 2 using xda app-developers app

I heard doesn't seem to work with SOME roms
Sent from my Goonified Paranoid Jelly Droid Incredible 2

I tried the latest ota Rom (minus bloat) with the new firmware and it worked fine
Sent from my ADR6350 using xda app-developers app

new radio on cm10
I tried the .0320 radio on aeroevan's cm10 and it just hung on boot. I then did a restrore to the CWM backup I made before I installed it and my phone booted fine and says it still has the new radio. Wierd... Does CWM recovery not backup and restore the radio?

chuck864 said:
I tried the .0320 radio on aeroevan's cm10 and it just hung on boot. I then did a restrore to the CWM backup I made before I installed it and my phone booted fine and says it still has the new radio. Wierd... Does CWM recovery not backup and restore the radio?
Click to expand...
Click to collapse
No, it doesn't, it was probably because of the other firmware stuff. But cwm does not back up the radio
Sent from my ADR6350 using xda app-developers app

chuck864 said:
I tried the .0320 radio on aeroevan's cm10 and it just hung on boot. I then did a restrore to the CWM backup I made before I installed it and my phone booted fine and says it still has the new radio. Wierd... Does CWM recovery not backup and restore the radio?
Click to expand...
Click to collapse
More accurately said...your radio is not affected by flashing roms. Only if you flash something specifically at the radio level.
As for CM10 hanging on boot, it has been a little finicky. I get bootloops, but eventually it brings itself out of the bootloop. If it is truly hanging, try changing the order of flashing...I do rom-->kernel-->gapps. I used to do gapps before kernel, but this seems to bring consistently better results. Don't have any idea why that would be. Also, I think you have to have either the 12 or 13 kernel for CM10 at this point.

The first time u flashed back to cm10 did you forget to flash a kernel? That could cause it not to boot and your backup that worked would have the kernel included where your fresh install wouldn't. This could explain what happened.
Forgot to quote the post but this is in response to chuck
Sent from my ADR6350 using xda premium

New firmware caused bootloop issues for me even after I wiped system, data and cache. I described it a separate bthread in Q
And A. That said, I didn't have good description with the latest radio. Always had the best luck with 622, which is an old gingerbread radio.
Sent from my Incredible 2 using xda app-developers app

no issues with AOKP. I did have a few issues the cwm and i think i just need to reflash recovery. Otherwise, no issues so far.

adammwhiles said:
The first time u flashed back to cm10 did you forget to flash a kernel? That could cause it not to boot and your backup that worked would have the kernel included where your fresh install wouldn't. This could explain what happened.
Forgot to quote the post but this is in response to chuck
Sent from my ADR6350 using xda premium
Click to expand...
Click to collapse
Kernel should be included in Rom, always has been, unless this is different, I don't know been away for a while...
Sent from my ADR6350 using xda app-developers app

jeremytn86 said:
Kernel should be included in Rom, always has been, unless this is different, I don't know been away for a while...
Sent from my ADR6350 using xda app-developers app
Click to expand...
Click to collapse
Some lately have been different
Sent from my ADR6350 using xda premium

Running Nit's TSM UKB Evolution 2.0 now with the newly leaked ics firmware with the .0320 radio, mobile data signal is a bit stronger, by as much as 8 to 10 dBm and WiFi isn't dropping out (was seeing random "X" instead of the signal bar before) - haven't run into any FC issues yet. screen transitioned is still a bit laggy sometimes when changing home screen - battery life is on par with other similar roms.

jeremytn86 said:
Kernel should be included in Rom, always has been, unless this is different, I don't know been away for a while...
Sent from my ADR6350 using xda app-developers app
Click to expand...
Click to collapse
The CM10 roms need a kernel flash following rom install:
http://forum.xda-developers.com/showthread.php?t=1805773
Notice the "NOT optional" part.

Letitride said:
Running Nit's TSM UKB Evolution 2.0 now with the newly leaked ics firmware with the .0320 radio, mobile data signal is a bit stronger, by as much as 8 to 10 dBm and WiFi isn't dropping out (was seeing random "X" instead of the signal bar before) - haven't run into any FC issues yet. screen transitioned is still a bit laggy sometimes when changing home screen - battery life is on par with other similar roms.
Click to expand...
Click to collapse
Thanks Letitride. Ill give this a shot today.

adammwhiles said:
The first time u flashed back to cm10 did you forget to flash a kernel? That could cause it not to boot and your backup that worked would have the kernel included where your fresh install wouldn't. This could explain what happened.
Forgot to quote the post but this is in response to chuck
Sent from my ADR6350 using xda premium
Click to expand...
Click to collapse
I didn't reflash the rom. I just did a restore from the backup I made right before I flashed the new radio. I have been running aeroevan's kernel
v.12 with Adreno drivers and cm10 7/30 build for 2 weeks now with no complants.(except for the FFC and video camera.)
If you read this post:
http://forum.xda-developers.com/showthread.php?t=1134451&page=51
You will see other people you have gotten it to work by clearing the cache after installing the .0320 radio so maybe the restore had the same effect. I didn't see any improvements as far as signal goes so I just reflashed the .0312 radio to avoid any problems. I may feel froggy this weekend and reinstall the .0320 radio this weekend and try the clear cache trick out. If so I will report back with the results.

Rushead said:
The CM10 roms need a kernel flash following rom install:
http://forum.xda-developers.com/showthread.php?t=1805773
Notice the "NOT optional" part.
Click to expand...
Click to collapse
No I didn't. Didn't really read op, didn't flash this, just saw his post, like I said was gone a while, had never seen rom without kernel, until now. ..
Sent from my Incredible 2 using xda app-developers app

I ended up installing the firmware then doing a full wipe before flashing my last ROM. So basically all I was left with was the new radio. Everything works so far.
Sent from my Incredible 2 using xda app-developers app

I tried just flashing the new radio .320 without the Rom and my aero 8/21 hung at boot. So I loaded the leaked ics Rom and I had the WiFi killing the data bug so I flashed tazz's and macros latest 8/28 build and my service is pretty solid. Ive seen better battery life and less service jumping with this radio. When and if aero updates his cm10 I'm going to try it out and see if things go the same for his Rom. I'm in love with the cm10 builds
Sent from my HTC Incredible 2 using xda app-developers app

After you flash radio on areo's cm10 just wipe cache will boot fine then.
Sent from my Incredible 2 using Tapatalk

[Q] where can I get a stable JB 4.1 for CWM T989!

I have been looking all over and my eyes are about ready to have a critical meltdown.
I have a T-Mo T-989 (Hercules) and have been looking for a JB ROM all night and found some shady threads or ROMs that don't work. I dunno, maybe I've installed something wrong, little help here?
Generally the ones that will install get hung up during the initial boot, wtf? Have run across some that wouldn't even install and would abort.
I should say I am using CWM 5.0.2.6... I think, its been so long since I have done anything to this phone so I forget but I know its ither Odin or CWM (or are they both one in the same? x.x ) I've been using Darkside Evolution ICS ROM all this time and would be nice to move up to JB if there is a stable one out there

Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

iburnhearts said:
Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Hmm, well I got goo manager and its now stuck on the TWRP's boot screen and just reboots after so long of sitting there :/ and its already deleted the rom, so I guess I have to go through the CWM rooting proceeders again?

Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<

i would say, to use twrp and download the latest cm10 Here.
i recommend twrp for stable flashing cause there's bugs in latest cwm...

PorscheHusky said:
Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<
Click to expand...
Click to collapse
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium

LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app

John imilitym
bzlik88 said:
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
CWR 5027 isn't bad at all it's just that using darkside scripts with certain new recoveries has caused some people boot loops and also with the newer recoveries they aren't required since the built in wipe options work just fine.Personally I use the recovery here http://forum.xda-developers.com/showthread.php?t=1844637
and have had zero issues with it plus it has the darkside scripts built in

Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app

arthurgreeeen said:
Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
+1. You can't go wrong with that Rom! I been running it for over a week now with zero complaints
Sent from my SGH-T989 using xda app-developers app

With the v3 sbean I couldn't get my home button to work when I ask tmo twice he didn't respond to my question. I'm looking at slimbean next we'll see how that goes
Sent from my SGH-T989 using xda app-developers app

I would recommend trying either AOKP OFFICIAL Build 5 (not sure if by time you read this if theres a newer one) or a CM10 Nightly. I've tried tons of different JB roms from 4.1 to 4.1.2 and those work good. Decent battery life without changing too many settings (I'm afraid to change too many things because I've hard bricked my phone before but barely got it replaced under the 20 day full exchange warranty). No random reboots or force closes for me so far. Highly recommend trying them out, very simple to flash.

Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app

duckied said:
Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
And I haven't had anything go majorly wrong with cm10 since the nightlies went official. I'm on the 10/24 nightly right now.
Sent from my A100 using Tapatalk HD

Nice nice... I wanna test out CMX maybe I'll make a nand backup and check it out
Sent from my SGH-T989 using xda app-developers app

LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Actually... I have CMW6 now the touch one. Does that have something to do with it? The main issue I have with SBean and CM9's JB is eveyrone complains that they can't hear me, that I sound like a robot and the call is badly broken up or that I'm not speaking up like my mic isn't picking up on my voice very well.
Is this a ROM error or a kernel error? rather annoying frankly @[email protected]

Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium

duckied said:
Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
This is a sure fix then? This would make me the happiest Porsche Husky on Earth if I could go back to Sbean
The customization features of it are to die for

Ooooo, wait a tic... I feel like such n00b now...
I kept downloading V1 thinking it was the newest one xD I think the V6 at the way bottom is the newest one. I'll try that for a few days then report back.
Edit: QUESTION - my screen is flickering (just installed SBEAN V6)... is that a bad install or did I have to fix permissions?

That pretty common in most JB rom but it usually goes away after few mins for me. You can go to settings and then developer options then disable hw overlay but you would need to do it on every boot because it won't stick after a reboot.
Btw you should check out official aokp-milestone-1 it not on here but Google aokp and download the one for our phone. Its pretty sick and stable.
Sent from my SGH-T989 using xda premium

BSOD, halo burn-in, graphic glitches: V20C

I've been running HoNo's cwm flashable V20C off and on since its release, more so than any other Rom, and experienced few issues if any. I couple weeks ago I decided to test some different roms (pa, cna, mui, a few cm10 nightly) but eventually ended up back at v20c after fresh wipe and clean install, due to some of the bugs in the other roms ( don't get met wrong devs, stellar job on some solid roms, just waiting for more stable releases). Now after flashing all these and coming back to v20c the phone ran great for a week, but has now started having graphical glitches in Facebook and other apps, eating battery, and just generally behaving like one of the older cm10 nightlys I had previously flashed. Then earlier today I got a black screen of death that I had to pull the battery for, and resulted in the halo-like screen burn in for about ten minutes after the phone rebooted. I have no idea why or how the cm10 bugs have carried over to my v20c flash since I wipe everything twice between flashes. Does anyone have any ideas or have experienced similar issues?
Sent from my LG-P930 using xda app-developers app

Hutch89 said:
I've been running HoNo's cwm flashable V20C off and on since its release, more so than any other Rom, and experienced few issues if any. I couple weeks ago I decided to test some different roms (pa, cna, mui, a few cm10 nightly) but eventually ended up back at v20c after fresh wipe and clean install, due to some of the bugs in the other roms ( don't get met wrong devs, stellar job on some solid roms, just waiting for more stable releases). Now after flashing all these and coming back to v20c the phone ran great for a week, but has now started having graphical glitches in Facebook and other apps, eating battery, and just generally behaving like one of the older cm10 nightlys I had previously flashed. Then earlier today I got a black screen of death that I had to pull the battery for, and resulted in the halo-like screen burn in for about ten minutes after the phone rebooted. I have no idea why or how the cm10 bugs have carried over to my v20c flash since I wipe everything twice between flashes. Does anyone have any ideas or have experienced similar issues?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
Maybe you should wipe EVERYTHING and reflash v20c. including /system.

How would I wipe /system
Sent from my LG-P930 using xda app-developers app

Hutch89 said:
How would I wipe /system
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
In CWM, goto mounts and storage, and there's an option to format /system.

Thanks rani. Damn looks like I'll be setting up this Rom again after I do that. Ugh fail
Sent from my LG-P930 using xda app-developers app

The v20c installer automatically formats system partition for you. I'm not sure why you'd have those issues.

Drumist are you referring to the cwm flashable version or the official? I know when you install the official using lg's update tool it completely wipes everything, but I've been using the cwm version in order to keep cwm/root
Sent from my LG-P930 using xda app-developers app

Hutch89 said:
Drumist are you referring to the cwm flashable version or the official? I know when you install the official using lg's update tool it completely wipes everything, but I've been using the cwm version in order to keep cwm/root
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I'm referring to HO!NO!'s version.