Related
So recently, Ive got my SE Xperia Play Bootloader Unlocked and I tried flashing the Darkforest ICS V4.1.23 rom onto the device. So I installed CWM 5.0.2.7 onto my phone with the help of CWM Auto Installer App. Then I reboot the phone into recovery mode and flashed the Darkforest ICS rom onto it after wiping all cache data and factory wipe and stuffs. However , when I reboot it I realised it was actually stuck at the Sony Ericsson White Words. So I guess it was properly due to the Kernel. Thus, I flashed the Darkforest ICS kernel onto the device through flashtool. But when I reboot the phone, it was stuck at the Sony logo for a long time, and it won't load. Afterward I entered the recovery mode of the kernel and checked it out. I therefore tried to flash the Darkforest ICS rom once again after wiping all data (Factory Reset and stuffs). However, when I'm about to choose zip to install from SD Card, there was an error saying that the SD card can't be mounted. I tried flashing other kernels like Advanced Stock Kernel but when I try to install zip from SD card, there will be an error saying SD Card cannot be mounted.
The only time I am able to flash the rom is when the device is in its original kernel.
Currently, I have restored the original SE firmware onto my Xperia Play but I really want to flash Darkforest ICS rom onto my phone. If I am doing the wrong thing, please tell me the correct methods. Any help will be appreciated. Thanks a lot.
sam6312 said:
So recently, Ive got my SE Xperia Play Bootloader Unlocked and I tried flashing the Darkforest ICS V4.1.23 rom onto the device. So I installed CWM 5.0.2.7 onto my phone with the help of CWM Auto Installer App. Then I reboot the phone into recovery mode and flashed the Darkforest ICS rom onto it after wiping all cache data and factory wipe and stuffs. However , when I reboot it I realised it was actually stuck at the Sony Ericsson White Words. So I guess it was properly due to the Kernel. Thus, I flashed the Darkforest ICS kernel onto the device through flashtool. But when I reboot the phone, it was stuck at the Sony logo for a long time, and it won't load. Afterward I entered the recovery mode of the kernel and checked it out. I therefore tried to flash the Darkforest ICS rom once again after wiping all data (Factory Reset and stuffs). However, when I'm about to choose zip to install from SD Card, there was an error saying that the SD card can't be mounted. I tried flashing other kernels like Advanced Stock Kernel but when I try to install zip from SD card, there will be an error saying SD Card cannot be mounted.
The only time I am able to flash the rom is when the device is in its original kernel.
Currently, I have restored the original SE firmware onto my Xperia Play but I really want to flash Darkforest ICS rom onto my phone. If I am doing the wrong thing, please tell me the correct methods. Any help will be appreciated. Thanks a lot.
Click to expand...
Click to collapse
Someone pls help !!!
Flash the stock ftf for your model. Boot it to set up. Power off then fastboot the kernel for your ics rom. Boot into recovery then wipe data, cache, dalvik. Then install from sd. There's no need for cwm app if your using custom kernel. Most come with recovery.
Sent from my R800x using xda app-developers app
Lordomn said:
Flash the stock ftf for your model. Boot it to set up. Power off then fastboot the kernel for your ics rom. Boot into recovery then wipe data, cache, dalvik. Then install from sd. There's no need for cwm app if your using custom kernel. Most come with recovery.
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
I went to reformat my SD card , and did as followed. Now the recovery mode is able to flash the rom but however when i start up my fone, it is totally black screen with only the time indicated at the top right hand corner . Pls tell me what I did wrong .
sam6312 said:
I went to reformat my SD card , and did as followed. Now the recovery mode is able to flash the rom but however when i start up my fone, it is totally black screen with only the time indicated at the top right hand corner . Pls tell me what I did wrong .
Click to expand...
Click to collapse
:angel: first of all calm down. find some good rom and a kernel first. im using MIUI cutom kernel. go to MIUI website find the insatallation procedure. download the things. if you cant go into fastboot mod. connect the phone to the pc and while conecting press "search botton on your play device" then it'll be recognized by the flash tool. then flash the kernel and fallow the steps given by MIUI... all the best.. :angel:
I have tried to Flash my Xperia arc S (Lt18i) with the Smart Xperia ROM.
But during the boot after installing Smart Xperia ROM part I, its stuck with the Boot animation.
My Device info:
Baseband: 77.
Kernel: ArcKnight_4.1
Unlocked Bootloader.
Android 4.0.4
(I have flashed " XperiaArc-SmartXperiences-ROM Stock Framework " with CWM as it was suggested at the post if stuck in Bootload, but still not working for me. The boot animation is stuck. I've waited for 10 mins, but the boot animation goes on and on and on.)
Please HELP me!
Reflash Stock RoM. This is the 82991 i said this. We have enough suchs threads, think what to do in case of problems BEFORE doing something.
ϟ ϟ [email protected]£R ϟ ϟ
jader13254 said:
Reflash Stock RoM. This is the 82991 i said this. We have enough suchs threads, think what to do in case of problems BEFORE doing something.
ϟ ϟ [email protected]£R ϟ ϟ
Click to expand...
Click to collapse
I've restored my phone as I made a backup earlier with CWM.
However, my device is running well now.
What I am asking is that is there any solution for my problem?
Why the boot stuck in my case?
ashique.akash said:
I've restored my phone as I made a backup earlier with CWM.
However, my device is running well now.
What I am asking is that is there any solution for my problem?
Why the boot stuck in my case?
Click to expand...
Click to collapse
If u have unlocked bootloader u should not ask such questions bro.
First flash kernel
Go to cwm and wipe everything except sdcard
Flash the rom
Flash the wifi modules for the kernel
reboot
So if you install part II, don't factory reset again !!, Just Wipe dalvik cache
Sent by my SMART XPERIA ROM JB/ ICS using my fabulous weapon
danisariandi said:
So if you install part II, don't factory reset again !!, Just Wipe dalvik cache
Sent by my SMART XPERIA ROM JB/ ICS using my fabulous weapon
Click to expand...
Click to collapse
I had done everything you told in your post. But it bootloops.
Please can you enlist the process here for me? That yould be so helpful.
I have just successfully rooted my Xperia Arc and installed CWM recovery.
I was about to flash a new ROM so before that I factory reset (nothing went wrong) and format my sd card (it went wrong here)
At the Recovery, under mount and storage, i formatted everything, including the system :crying:
I thought it was something on the sd card, not the operating system :crying:
Now when I try to boot up the phone it just stuck at Sony logo
I have come so far just to screw it all up at the last step
Is there any where to install back the OS
Please I really need help. I just started a day ago. Please help
w1un said:
I have just successfully rooted my Xperia Arc and installed CWM recovery.
I was about to flash a new ROM so before that I factory reset (nothing went wrong) and format my sd card (it went wrong here)
At the Recovery, under mount and storage, i formatted everything, including the system :crying:
I thought it was something on the sd card, not the operating system :crying:
Now when I try to boot up the phone it just stuck at Sony logo
I have come so far just to screw it all up at the last step
Is there any where to install back the OS
Please I really need help. I just started a day ago. Please help
Click to expand...
Click to collapse
Hi Just dowload any room from here put the sd car and install from the cwm .or try to recover from sony pc companion just do repair
Hi thanks for the quick reply
Hmm all my phone can do is stuck at Sony logo, nothing else
It is that bad, and for your info
It can't go into Recovery
My PC / Sony PC Companion is not able to detect it
Flash tool still can detect that it is connected
and by any ROM u mean custom ROM?
I have Speed ROM 8.0, not installed on my phone yet though
If I just install custom ROM I can get my phone back to life?
But first, I don't think I can install custom ROM / do anything when I can't do things I mentioned above
Download stock ICS and flash it using flashtool.
Thanks for the reply
Ok I will try that.
But how to flash a ROM using flash tool? It is possible? I have only used flash tool for firmware.
And all I can google is about how to flash a ROM using ROM Manager or Recovery.
Do you have link to any tutorial about this?
Edit:
Opps I found something about that.
Another question, is it ok to use any version of stock ICS?
I found Dovahkiin 1.2. Is it ok?
Or is Speed ROM 8.0 ok?
w1un said:
Thanks for the reply
Ok I will try that.
But how to flash a ROM using flash tool? It is possible? I have only used flash tool for firmware.
And all I can google is about how to flash a ROM using ROM Manager or Recovery.
Do you have link to any tutorial about this?
Edit:
Opps I found something about that.
Another question, is it ok to use any version of stock ICS?
I found Dovahkiin 1.2. Is it ok?
Or is Speed ROM 8.0 ok?
Click to expand...
Click to collapse
First you will need a stock rom,than root,cwm and than you can start with custom roms...
Flashtool works only with .ftf files as i know,so first download ICS Stock .587...
Sent from my LT15i using xda premium
my bad! i knew they were different things :x
Stock ROM is like a base then Custom ROM is like the topping
I have found a Stock ROM, hope I can get it to work
Thanks for your reply anyway
post here just in case anyone else need this info
http://forum.xda-developers.com/showthread.php?t=1653188
Wooo
i got it!!
A big thank you for you all
w1un said:
Wooo
i got it!!
A big thank you for you all
Click to expand...
Click to collapse
Just a tip: before you mess with anything make a nandroid backup... So that you won't lose any apps data and stuff...
Sent from my Xperia Neo V using xda app-developers app
I have a Sony Arco HD (Japanese version of the Acro S), and I have some weird experiences.
Firstly, I installed Nordic stock .200. Then, as I have LB, I installed trinity raptor rom. This uses the aroma installer.
Thought I'd try a different rom, so I tried the BlackZax7 rom, which flashes straight from a zip.
When I flashed it, my phone wouldn't go past the Sony logo.
So, I got it into flash mode, re-flashed stock 200, rooted, installed CWM again, than tried to restore the backup I'd made with CWM, but it failed. No idea why.
SO I reflashed Trinity, using aroma, no problem there.
Today, I thought I'd have another try at installing the BlackZax7 rom, so I backed up my rom again. Thought I'd test my backup, so I tried to restore my back-up straight away. Wouldn't boot past the sony screen, despite seeming to be successful in restoring my working rom.
In both cases, if I plug phone into a power source (USB or mains), it turns itself on, and sticks at the Sony logo. If I unplug it, I can turn it off using the hard reset. But as soon as I plug it in again, it will turn itself on.
When I get home, I will fix my phone with flash tool, but any idea why this oddness would happen?
Nagoyablue said:
I have a Sony Arco HD (Japanese version of the Acro S), and I have some weird experiences.
Firstly, I installed Nordic stock .200. Then, as I have LB, I installed trinity raptor rom. This uses the aroma installer.
Thought I'd try a different rom, so I tried the BlackZax7 rom, which flashes straight from a zip.
When I flashed it, my phone wouldn't go past the Sony logo.
So, I got it into flash mode, re-flashed stock 200, rooted, installed CWM again, than tried to restore the backup I'd made with CWM, but it failed. No idea why.
SO I reflashed Trinity, using aroma, no problem there.
Today, I thought I'd have another try at installing the BlackZax7 rom, so I backed up my rom again. Thought I'd test my backup, so I tried to restore my back-up straight away. Wouldn't boot past the sony screen, despite seeming to be successful in restoring my working rom.
In both cases, if I plug phone into a power source (USB or mains), it turns itself on, and sticks at the Sony logo. If I unplug it, I can turn it off using the hard reset. But as soon as I plug it in again, it will turn itself on.
When I get home, I will fix my phone with flash tool, but any idea why this oddness would happen?
Click to expand...
Click to collapse
Yeah, a real and correct flashing of a ROM is made with Flashtool, not through CWM, flashing through CWM will never install a ROM correctly,
That's just not true. It's normal to back-up and restore ROMs using cwm.
Sent from my Nexus 7 using xda app-developers app
Yes it's true. You are the example.
skywalkerdroid said:
Yes it's true. You are the example.
Click to expand...
Click to collapse
Then why did i manage to restore roms from cwm before?
You aren't helping. Please stop.
Sent from Pompey, via Nagoya.
Restore,maybe. Flashing through CWM it's not so accurate.
---------- Post added at 12:20 PM ---------- Previous post was at 11:52 AM ----------
Ok, you have to wipe everything,dalvik's cache included,after that power on your phone, install drivers,restore to factory settings just to prepare your phone for a clean ROM flashing.Do that and you can flash ROM through CWM without problems.
skywalkerdroid said:
Restore,maybe. Flashing through CWM it's not so accurate.
---------- Post added at 12:20 PM ---------- Previous post was at 11:52 AM ----------
Ok, you have to wipe everything,dalvik's cache included,after that power on your phone, install drivers,restore to factory settings just to prepare your phone for a clean ROM flashing.Do that and you can flash ROM through CWM without problems.
Click to expand...
Click to collapse
I've flashed roms to this phone, to my tablet, all through recovery.
There is some kind of problem with the combination of kernel, recovery and phone.
Flashing roms through recovery isn't hard, normally. I've even done it on the train to work!
Sent from Pompey, via Nagoya.
Nagoyablue said:
I have a Sony Arco HD (Japanese version of the Acro S), and I have some weird experiences.
Firstly, I installed Nordic stock .200. Then, as I have LB, I installed trinity raptor rom. This uses the aroma installer.
Thought I'd try a different rom, so I tried the BlackZax7 rom, which flashes straight from a zip.
When I flashed it, my phone wouldn't go past the Sony logo.
So, I got it into flash mode, re-flashed stock 200, rooted, installed CWM again, than tried to restore the backup I'd made with CWM, but it failed. No idea why.
SO I reflashed Trinity, using aroma, no problem there.
Today, I thought I'd have another try at installing the BlackZax7 rom, so I backed up my rom again. Thought I'd test my backup, so I tried to restore my back-up straight away. Wouldn't boot past the sony screen, despite seeming to be successful in restoring my working rom.
In both cases, if I plug phone into a power source (USB or mains), it turns itself on, and sticks at the Sony logo. If I unplug it, I can turn it off using the hard reset. But as soon as I plug it in again, it will turn itself on.
When I get home, I will fix my phone with flash tool, but any idea why this oddness would happen?
Click to expand...
Click to collapse
the only reason why you are facing problem is LB i also hve personal experience that installing rom through cwm on a LB went to soft brick and sony logo etc etc just unlock your bootloader and then try....... :victory:
and yes any rom which uses custom kernel needs also to hve an Unlocked BL...
n70shan said:
the only reason why you are facing problem is LB i also hve personal experience that installing rom through cwm on a LB went to soft brick and sony logo etc etc just unlock your bootloader and then try....... :victory:
and yes any rom which uses custom kernel needs also to hve an Unlocked BL...
Click to expand...
Click to collapse
Nope, that's not the answer. The roms I am trying to flash are for locked BL, ie they use the stock Kernel.
Anyway, I recovered it last night using flash tool, so I'll probably stick to stock Sony rom for a while seeing as there isn't much change in performance if you can't change the kernel.
Nagoyablue said:
Anyway, I recovered it last night using flash tool, so I'll probably stick to stock Sony rom for a while seeing as there isn't much change in performance if you can't change the kernel.
Click to expand...
Click to collapse
why not unlock your bootloader?
boyheadkick said:
why not unlock your bootloader?
Click to expand...
Click to collapse
You say it like I have a choice........:laugh::silly:
Nagoyablue said:
You say it like I have a choice........:laugh::silly:
Click to expand...
Click to collapse
oh right, you have an acro hd..silly question, BL unlockable?
boyheadkick said:
oh right, you have an acro hd..silly question, BL unlockable?
Click to expand...
Click to collapse
Yeah, Japanese carriers wouldn't even let you do a sim unlock after you finished paying for the phone until recently. I bought my first Japanese smartphone, a Sharp, but Softbank won't let me do a sim unlock. Unbelievable.
Regarding my problem, maybe due to having Trinity 2.7 installed? I had no problem flashing roms or reinstalling backups via CWM on rooted stock .200 or Trinity 2.6.
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
you shouldn't post a like or not like any developer handmake. try back to a stock..
Mushtaqs said:
Guys i really need help, I'm using an xperia play and i had just unlocked the bootloader and then flashed a the trueancestors ics rom and the LuPuS_zeus_Stock-gB+iCsv7-full kernel. Now it turns out that i didnt like the rom so i put it back to stock, still with the lupus kernel. Everything was working however i wanted to have the doomkernel v14. So i flashed the doomkernel and it was working however the wifi had erroros so i changed back to the lupus kernel. Again everything was working fine now. I then found out how to fix the wifi problem on doomkernelv14 so refrlashed that kernel. Before i reflashed the kernel i deleted the trueancestors isc rom as i didnt like it so i thought it would be ok. After the flash i tried to reboot the device, and it was stuck on the bootloader for doomkernel, not in a bootloop just stuck at doomkernel bootloader. I tried to fix this by going to recovery (clockwork mod) and then did a factory reset, wiped the cache and data and the dalvik cache as i saw these online for instructions on how to fix this problem. Still i had the same problem, stuck at bootloader. So i tried somthing different and reinstalled the trueancestors ics rom, and tried to reboot the xperia play, again stuck at bootloader. Im sorry if this was a bit long but I AM LITTRALLY BEGGING FOR SOME HELP! Please make a suggestion as to how i can fix this ASAP. Can it be fixed?Thank you for you Advice it is very much aprecciated. Ive posted this somewhere else in which i couldnt find but i really need help on this, please can anyone help. :crying:
Click to expand...
Click to collapse
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Bakisha said:
When switching kernels with different partition layout you have to delete data and system partition in fastboot mode.
I'm lazy to type again so here is a link where it is explained already:
http://forum.xda-developers.com/showthread.php?t=1849536&page=100
You can prevent future problems by wiping data and system partittion from CWM and THEN flash new kernel that have different partittion layout
Click to expand...
Click to collapse
I havent tried this yet,becuase i need my dad to allow flash tool to work (Parental controls ffs -.-") however i saw the thread and i saw this part saying enter these commands "fastboot erase userdata and fastboot erase system i undestand how to get the command thing open but how do u enter these in, and what i mean is do you just open the command thing and just paste these in or do u have to right click somthing open comand promt here and all the stuff then enter them? Also these steps u listed, everything is fine its just my lack off knowladge for some of these things which i do apologize for
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
3.erase system and data from fastboot
4.enter recovery and flash your rom "
Where do you get the unlocked vender partition, and which one is better .62 or .79 and if u could send me a link as your helping me i think ur choice of links for this is more reliable than mine, and again this is greatly appreciated.
" Fully working steps, that is 100% working:
1.flash ftf with unlocked vendor partition (.62 or .79)
2.flash lupus gb kernel
Download file name R800i_4.0.2.A.0.79.ftf from Xperia Play Index - ROM'S, FIRMWARE, KERNEL'S, GUIDE'S, THEMES, MOD'S second post have firmware files
Guide how to use flashtool you can find at [GUIDE][18th Dec][4Noobs] Flashing A FTF File Using Flashtool
Flashing .79 or .62 firmware is necessary if you are planning to use lupus gb or icd/gb kernel - and you only need to do it once.
Flashing kernel is same, but when pressed on lighting icon, choose "fastboot"
3.erase system and data from fastboot
Ok, i made a zip for you. Download it from attachment, unpack to anywhere you like and double-click file named "start". Power off phone, press search and while keeping it pressed, plug in usb. I don't think you need admin rights for that, but:
MAKE SURE YOU HAVE ROM PLACED ON YOUR SD CARD! Just in case, because that program will erase everything from your phone.
You should be able to enter recovery and/or flash your rom/restore your backup.
4.enter recovery and flash your rom "
Also, read some sticky threads, they are there for a reason
Again im really sorry to bother you with this, but what if i dont want to flash the rom, becuase i didnt like it in the first place so i went back to stock, however this method of returning to stock was to flash the R800i_4.0.2.A.0.62_(1253-4437).ftf file. Now what it did was return it to stock rom (AFTER i tried the rom i didnt like) and unrooted the phone, i dont know if it returns the phone to stock firmware, and if the method of the system data wipe thing with the command prompt deleted everything, what can i flash? Little more explaination as to why im asking. Before this boot stuck thing hapenned i had used that same ftf file to return it to stock and unrooted. I re-rooted the phone and then flashed the lupus kernel. Everything was fine. I wanted to flash the doomkernel because like a dum nut i wanted to show off that i could overclock to 2ghz ( if i wanted to) as if alrdy stated before and did so. I think you can only flash zip files from your SD card so the ftf file wont be able to be flashed while on the device. So what do i flash? Should i just flash the rom i dont like and try return it to stock, then flash the ftf .79 firmware again after re-rooting the phone, then flash the doomkernelv14. In short i want to stay with the normal gingerbread 2.3.4 with doomkernelv14. Again i havent tried this yet and also sorry for these long rambly posts, i just want to give you as much info as possible in order for you to help me. Thank you so much for your solution btw much appriciated.:good:
And almost forgot i also want it back to rooted but i can do that myself, i just thought i'd specifiy it just incase its worth anything.
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Bakisha said:
Try this
http://forum.xda-developers.com/showthread.php?t=2408688
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Alright ive had the chance to try it out and i just got started on the firmware flash, problem is that its stuck at 16/033/2013 14:33:15
- INFO - Preparing files for flashing
16/033/2013 14:33:53 - INFO - Please connect your device into flashmode.
16/033/2013 14:33:54 - INFO - Opening device for R/W
16/033/2013 14:33:54 - INFO - Reading device information (stuck here)
Any sugessions to what i should do?
Alright i fixed the firmware flash problem and have made it all the way to the the part where you flash your custom rom and the phone should magicly work again. Ive got past the doomlord booting screen, thats good, now im stuck at a black screen, any ideas on whats going on?
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Mushtaqs said:
K so i fixed all the above problems, by using a different kernel, and repeating all the previous steps, THE XPERIA PLAY IS BACK DUDE THANK YOU( hit the thanks button like 100 times).
Click to expand...
Click to collapse
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Mushtaqs said:
Everythings fine at the moment and i dont want to make any more dumb mistakes so im just going to ask if wiping the data and system partitions in CWM still deleted everything. I just recently got all of my apps back and all that good stuff, i just want to know if they will get erased if i do this. My deepest appologies for bothering you with something so minor and selfish.
Click to expand...
Click to collapse
Mushtaqs said:
Sorry another selfish request (Damit) but when ever i flash the doomkernel v14 my wifi gets error, i was wondering if u knew how to fix this, if u dont and have the free time or feel like it, direct me to somone who does?
Click to expand...
Click to collapse
Yes, if you wipe data and system then EVERYTHING is deleted. All your apps (data) and even android OS itself (system). You'll have to either flash new rom or restore backup after wiping system
Doomkernel need wifi modules to be installed from CWM recovery to have working wifi
I'll attach it
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
ok...i screw up my xperia play... dunno what to do.
hi guys, been a noob after i fed up with my xperia x8 now i having a xperia play f or 2 years and try to install a custom kernel and roms but i end up brick my phone. it just stuck at logo "xperia free play". it still can enter cwm recovery mode but when i use the method press the arrow thing then plug in the usb cable to pc , it seems my pc did detect my phone but cant show up my memory card in 'my computer' window. The i try to use fastboot & flashtool both can detect my phone after plug in. Here is what i do before brick:
first thing i did on my phone was to upgrade the stock kernel 4.0.2.a.0.42, then i unlock the bootloader, root it, and start download the custom rom without download the requirement kernel. after that, i install CWM using fast boot, put the custom rom to sd card, wipe user data, bla bla bla, then install the custom rom, the next thing i see is the problem i talking about earlier. So i try to using the service update from SCE but it just say im using a modified kernel hence i unable recover it using that method. so, i try to use flash tool x10 (i cant get any working download it keep saying error 404 link, this is the best i have now) when i press the flash it come out red words with error usb ...the thing is my phone cant get detected by my computer.... What to do or it is over? (p/s : i download the flash tool & adb package winrar file & the custom rom i mention is close 2 perfection)
I know is a bit long but I really need help on my phone, i still have a x8 here from my mom and mine is xperia play brick for 3 days now i still cant find a way to solve it. PLEASE HELLLLLLLLLLPPPPPPPPPPPP. THANK YOU FOR THOSE RESPONSE~!
Bakisha said:
Glad to helpfull
Remember, kernel must much rom. Gb stock kernel for gb sony based rom, you'll get stuck agan in kernel logo if if you flash kernel that don't match rom/firmware
Just read in kernel thread for info on wich roms it works
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
For most part, you are doing it right, but, to solve problem with recovery, you should use "eraser" AFTER you change kernel
Sent from my R800i using xda app-developers app
---------- Post added at 01:23 PM ---------- Previous post was at 01:18 PM ----------
Mushtaqs said:
Im wondering about my battery life, because it seems to be draining faster. Im using no frills cpu with the lupus kernel alowing me to overclock to 1.6 ghz. I set my higest on 1613 mhz and lowest on 249mhz using the smartassv2 governer. any idea to whats going on ?
Click to expand...
Click to collapse
Naturaly, it will drain more battery BECAUSE it's overclocked.
Sent from my R800i using xda app-developers app
Mushtaqs said:
Man i was doing so well before, but im now stuck in a bootloop. I cant enter the recovery menu as the phone just keeps bootlooping. Also with lupus kernel the menu doesnt come up. I just erased the user data and system with ur zip from before and flashed aurora play with lupus v12.5 kernel It worked like everything else. i got more curious so i did the same thing erased user and system data then flashed gin2jellybean with the same kernel.( i followed ur intructions from before on how to flash roms n stuff) Everything worked again. I wanted a new kernel so i flashed extreme kernel r3. phone got stuck in a bootloop. So i erased user data and system data, then flashed and ftf stock rom and then flashed extreme kernel r3. everything was working. I went into titanium backup and uninstalled some system apps and accidently deleted the one that let you see the running services to see available ram. So i cleared data and and system data reflashed ftf stock rom in flashmode ofc, and extreme kernel in fastboot. I got a bootloop, so i tried all the different kernels that i could and i cant get into the menu for recovery. Can you please help me once again, i'll thank every post.
Click to expand...
Click to collapse
I think you should repeat the fastboot process once again, so:
fastboot erase userdata
and fastboot erase system
then just flash the kernel you prefer.
I had exactly the same problem with my play bootlooping after flashing some kernels. and this solved the problem for me :victory:
sorry for my bad English, :crying: