Related
hey guys!
i will realy appriciate any help on this one:
i am in a light panic attack as i might bricked my first phone..
today i have updated my t989 to ics 4.0.4 via kies, and then rooted it.
of course the root was so i can flash a rom. i chose to try cm9.
any ways, in order not to get the phone stuck in boot loop, i have tried to install the touch version of the cwm recovery.
i did it through the zip on sd option.
the version i used was: CWM6013-TOUCH-CM9-recovery (file size 4.201)
it seemed ok at first.
but then when i retsrted the phone, i noticed that every app i am trying to launch takes forever to respond (about a minute)...
i have tried to do factory reset and it did not help - the phone was sluggish even on the first setup screens..
now i am in the process of downloading the stock version again, to unroot. is this the way to go? did i miss something?
please let me know what info i can provide so you will be able to help me.
again, and i can't say it enough: every help will be very much appreciated. so, did i brick my phone?
thanks!
cvbn
Dude wrong section.
cvbn52 said:
hey guys!
i will realy appriciate any help on this one:
i am in a light panic attack as i might bricked my first phone..
today i have updated my t989 to ics 4.0.4 via kies, and then rooted it.
of course the root was so i can flash a rom. i chose to try cm9.
any ways, in order not to get the phone stuck in boot loop, i have tried to install the touch version of the cwm recovery.
i did it through the zip on sd option.
the version i used was: CWM6013-TOUCH-CM9-recovery (file size 4.201)
it seemed ok at first.
but then when i retsrted the phone, i noticed that every app i am trying to launch takes forever to respond (about a minute)...
i have tried to do factory reset and it did not help - the phone was sluggish even on the first setup screens..
now i am in the process of downloading the stock version again, to unroot. is this the way to go? did i miss something?
please let me know what info i can provide so you will be able to help me.
again, and i can't say it enough: every help will be very much appreciated.
thanks!
cvbn
Click to expand...
Click to collapse
What all did you do to install the ROM?
Something like this happened to me on my original Galaxy S when I updated it via Kies to the new stock version. Everything was running extremely sluggish. I don't remember what I ended up doing to fix it but I most certainly did not keep the stock update on there. I rebooted it and let it sit for about 30mins and then rebooted it again and tried using it. It was a bit better but still not good so I just flashed another Rom and then it was lightning quick.
The good news is you didn't brick it if you can still boot up and run stuff. I'd suggest updating your recovery to TWRP as that seems to be the preferred one now a days, it's the one I've been using to flash countless Roms without any problems, and most Devs recommend it. Apart from that, follow the install instructions precisely and you shouldn't have a problem. To be sure, after upgrading your recovery to TWRP, you could do the wipes (cache/dalvik/factory reset/system) 2-3 times before installing your new Rom, that seems to help some people coming from previous troublesome Roms.
I've noticed a few problems people seem to have around here come from the recovery, mainly those not using TWRP and/or using some form of outdated or beta CWM. Hopefully you can fix your problem, I know first hand how awful that sluggish feeling is. Good luck!
Hey guys.
This has only started to happen since I installed a rom that seemed to come with twrp and has removed my cwm..
My phone now seems to be very laggy when scrolling, even the notification noise lags and when it goes to into standby nothing happens it just goes off and the only way I can use the phone again is by taking the battery out.
I've tried flashing a new rom but thats not making a difference and i'm at a loss at what to do now....
Thanks for reading and any advice is appreciated.
*Forgot to mention, when being attached to pc via usb its not being recognised as being there, doesn't show as attached, just does nothing*
mrkupochan said:
Hey guys.
This has only started to happen since I installed a rom that seemed to come with twrp and has removed my cwm..
My phone now seems to be very laggy when scrolling, even the notification noise lags and when it goes to into standby nothing happens it just goes off and the only way I can use the phone again is by taking the battery out.
I've tried flashing a new rom but thats not making a difference and i'm at a loss at what to do now....
Thanks for reading and any advice is appreciated.
*Forgot to mention, when being attached to pc via usb its not being recognised as being there, doesn't show as attached, just does nothing*
Click to expand...
Click to collapse
Could you please specify what Rom and version that you flashed?
Sent from the rabbit hole.
Did you install one of the other custom recoveries manually yet? Btw. IMHO TWRP is the best anyways. Did you do a full wipe before installing new ROM? what kernel/version are you on?
I went from using the Android revolution HD 10.0 version with stock kernel, I changed to AllianceROM N7100 XXDMA6 JB V1.0 but didn't find it smooth enough so I swapped back to Revolution, thats when I found twrp had installed.
I've tried flashing the stock recovery and i'm still getting the same issue.
I've since reflashed cwm but this hasn't solved the problem unfortunatley.....No idea what to do
You should at least wipe cache/dalvik, or even after doing a backup with TB, a fullwipe.
Martux76 said:
You should at least wipe cache/dalvik, or even after doing a backup with TB, a fullwipe.
Click to expand...
Click to collapse
All done, several times, no difference
Have you considered it could be sudden death syndrome?
You should have nothing to worry about in terms of it dying, since you have a very recent base rom (dma6), which include safeguards against it.
When it freezes, have you tried waiting to see if the phone responds after you press the Home Button?
I ask this because I've read reports of people waiting for over 20 minutes for the phone to become responsive again after pressing the home button when in standby.
Another thing: have you ever flashed a full stock rom after DLL7 (including DMA6)? I ask this because DLL7 and later include a new bootloader that *supposedly* helps address the sudden death issue. It doesn't hurt to try anyway.
Sent from my GT-N7100
If ur pc recognises ur phone in download mode seaech the forum for rescue firmware (it comes with pit file) and flash it with odin..u should be sorted then.
Sent from my GT-N7100 using Tapatalk 2
Right. Here we go.
Yesterday, I used HTC devtool and easy ace tool to be rooted and unlocked bootloader. Im still S-On. Ace Pvt Hboot.
Had all sorts of problems. Firstly, with PacMan, which looked and worked fantastic, except no GPS lock, AT ALL, (important to me) soi tried Jellytime and CFX, but all three had issues, and GPS worked on none. I believe this is because the radio is the original one, but dont have the knowledge, skill, or importantly courage to flash an updated radio.
So, tried to flash and EXT4 recovery, with the tool from Google Play. Will not work. Saves to a folder on SD but still boots in CWM recovery So I cant use EXT roms properly. I tried to go back to PacMan, but I cant even do that. I wipe and format, and reflash the boot image, but every time it wont load correctly - something ddoesnt work, and I get errors. Latest was Android Keyboard is not working, so I cant do anything!
Attempted to put ViperDHD rom on to go back to something like stock (GPS worked great on stock!!) and worked ok, with some funny issues on initial boot but settled down. But, STILL no GPS.
Decided stuff it, go back to stock . Downloaded stock RUU and attempted to install, but, of course, it wont work.
So, in short, I have a fantastic Desire HD, that wont flash EXT4, wont go back to stock on RUU, and I cannot find a ROM that will work with GPS. On some, wireless doesnt work either.......
So, if someone could help me to either make my GPS work on ICS or Jellybean, or, help me go back to where I was, (GPS working!!) before I started all this, I'd be eternally grateful. I dont have money to spend on a new phone, so I'll even put some money in your development coffers as a thankyou for helping me out. I just need me smartphone to be smart again, not the useless pile of Sh*te it is right now
My previous post about lack of GPS proved fruitless, no replies. BUt I am hoping that one of you Desire HD gurus will rise to the challenge that I face right now and help. I cant but you a beer, I cant do much at all, but of you help me fix my problem I will, I promise, be eternally grateful. I'll even send your missus flowers by Interflora if that helps!!!:silly: Seriously, I really need someone who knows there stuff to give me a hand out of a hole.
My thanks in advance.
Phil
Hey there. Seems like you've gotten yourself into quite a little mess there.
First of all, I'd recommend you flash BlackICE. Its a Gingerbread based ROM but I know for 250% fact that it is rock solid and the GPS works.
After that, I believe you're going to have to manually flash the recovery using fast boot (hit up the link for the Ace Think Tank in my signature for guides and any additional help you might need)
Finally, another bulletproof ROM I recommend is IceColdSandwich. I personally know that this ROM is 100% stable and that the GPS works.
If you need any additional assistance, feel free to post in the Ace Think Tank. And as always, be sure to drop a thanks if I helped or anyone else helps!
Edit: ViperDHD isn't based on stock my friend. Its based on the One V stock ROM as far as I know, so its been ported from that. An amazing stock based ROM is Android Revolution HD, which I've tested personally and found to be bloody amazing!
Also, the RUU won't flash as you'll have to relock your boot loader. Use fast boot to to that if you still want to return to stock
Edit 2: also. Please refrain from creating multiple threads. I know its tempting but the desire HD is slipping into the legacy stage, where I treat and development is slowing down. If you must get an answer quick, either 'bump' your thread (simply post the word 'bump' and it'll push it to the top of the list, so it'll show as unread. Be aware that you can only do this once every 24 hours) or post in the Ace Think Tank.
Thanks
- Sent from Guy's Super Duper S3
GuyInTheCorner said:
Hey there. Seems like you've gotten yourself into quite a little mess there.
First of all, I'd recommend you flash BlackICE. Its a Gingerbread based ROM but I know for 250% fact that it is rock solid and the GPS works.
After that, I believe you're going to have to manually flash the recovery using fast boot (hit up the link for the Ace Think Tank in my signature for guides and any additional help you might need)
Finally, another bulletproof ROM I recommend is IceColdSandwich. I personally know that this ROM is 100% stable and that the GPS works.
If you need any additional assistance, feel free to post in the Ace Think Tank. And as always, be sure to drop a thanks if I helped or anyone else helps!
- Sent from Guy's Super Duper S3
Click to expand...
Click to collapse
Thanks for coming back to me mate, it is greatly appreciated.
Ok, deep breath, and after my above and considering your reply, I ihave flashed an EXT4 recovery from Fastboot, but, this will not load. Goes to HTC screen and stops. Im sure I can put it right with EasyAce which I will try now.
I will try then to put Black ice on as you advised and post back.
really appreciate your advice!
addictR3 said:
Thanks for coming back to me mate, it is greatly appreciated.
Ok, deep breath, and after my above and considering your reply, I ihave flashed an EXT4 recovery from Fastboot, but, this will not load. Goes to HTC screen and stops. Im sure I can put it right with EasyAce which I will try now.
I will try then to put Black ice on as you advised and post back.
really appreciate your advice!
Click to expand...
Click to collapse
Seems I cant boot into a recovery at all now. Tried to reflash with EasyAce tool but getting errors. I dont have a working recovery, so cant flash a rom
Ok, somehow, via the red wine and stress induced fog, I managed to get EXT recovery working. Im now tryig to get a rom working. Tried PacMan again, bit straight off I get AOKP keyboard not working error and I didnt have to go through the Google setup - why cant I get a clean boot - this confuses me?? I wipe Cache, Dalvik. Factory reset - same problem. I have even tried formatting system from Advanced - same????
At least I can flash RIMs now!!
Thanks again for your help
You are still s-on yes?
Have you flashed boot.IMG?
If you are s-on you must flash the boot.IMG (contained inside the ROM's zip file) using a PC and "fastboot flash boot boot.img" every time you change to a new, different ROM.
Sent from my GT-I9505 using xda app-developers app
I have indeed mate, one thing I learned early on.
I have managed to get JellyTime on ok, but, again, no gps and also the potentiometer for the compass etc appears to not work!! Arrrrrgh!!!!
I think the issue must be the radio. Can I flash a new radio if im S-On and bootloader unlocked? Im ok with fastboot stuff if I need that to push a radio, but, I read that flashing a radio is inherently more "dangerous" than flashing the recovery etc.
I hoped the EXT4 recovery would make a difference, but seems not to have at all. FWIW, I also did the GPS antenna mod yesterday, and it hasnt helped either. My gps appears to work, but its very poor. I left it outside for 10 mins last night looking up at clear sky and it didnt show one satellite.
Think it might be time to sell the phone
You need to be S-Off to flash a radio.
I still cant get my head around why I cant get PacMan back on ok? It worked a treat first time, except for gps. Now, it will not install properly at all. It boots ok, but straight away I get keyboard has stopped working, and it doesnt go through the account setup etc.
But the potentiometer works!!!!!
Where I am at now.
Put CWM recovery back on, and tried Cyanogen 7.1. Would not boot. Several attempts at wipe and reflash did not cure this. So I am now running Android Revolution HD7.3. I thought as it was close to a stock ROM it may work, but, still no joy.
I put other halfs Desire HD next to mine and started the GPS on them both. Hers locked in less than a minute. Half an hour later, I had seen one brief flicker of two satellites on mine, Still no fix.
So, I dont know what to do really. I ish I could put the phone back to how it was, but doesnt look like that is going to be an option. Tried the RUU, but it doesnt work
I still cannot understand why none of these roms will work with the GPS when it was perfect before on stock 2.3.5??
What's wrong with the RUU? I would try flashing a fresh recovery image from fastboot, then wiping everything under the sun and flashing ARHD again.
[Q&A] [ROM][4.4.4/KTU84P][OMNIROM][LINARO/OPTIMIZED] FML: Fork My Life (10/08/2014)
Q&A for [ROM][4.4.4/KTU84P][OMNIROM][LINARO/OPTIMIZED] FML: Fork My Life (10/08/2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
kbfirebreather said:
Anyone having problems with torch on the beta build? Not turning on LED for me, and keeps force closing.
Click to expand...
Click to collapse
I'm having issues with it as well. Sometimes it sits there thinking it works, other times it waits a few seconds and then crashes. It worked for a day...not sure what I did past that to break it.
Is there anyway to overclock the latest update? I know I can't install a new kernel with this ROM.
Also, any option for Volume Rocker unlock? I'm new to this ROM, coming from CM. I kinda rely on that option, since my power button is kinda on the fritz.
Fml 4.4.4 beta
I love this rom but my after clean flashing it the gallery and the camera will not show
Pictures. Is there anything I can do to fix it so I can get camera and gallery to work?
vicious01 said:
I love this rom but my after clean flashing it the gallery and the camera will not show
Pictures. Is there anything I can do to fix it so I can get camera and gallery to work?
Click to expand...
Click to collapse
Which gapps package are you using? I'm using the modular mini. Try another clean flash (sorry) and use a different package than you are now.
aaa
nothing
I've tried a lot of KitKat ROMs, but each one with a lot of issues. So I came back to the 4.3, it surprised me for his stability (1 year with bugged ROM make you feel that your phone sucks more than it actually does [no, it doesn't, I love it!]) and I decided to don't try your FML. Now I can't wait for Lollipop, and even if I haven't tried your ROM, I trust in it and I think it will be the best choice. Good work and thanks!
Could some1 possibly upload a video of this good work ? Got a maguro and I'm very curious
thx in advance!
Samsung Galaxy Nexus FML Lollipop
Hello. I hope this is the right place to post this. I have less than 10 posts so I have to post here...
I've tried to install your FML rom (the lollipop beta) on my Samsung Galaxy Nexus, but I seem to be having the same issue that coleburns is having. Namely, I flashed the rom from recovery, but when I reboot the phone, it shows the Google splash screen and then keep rebooting over and over again.
I understand that the first boot is supposed to take some time, but I've left it for over an hour and it still won't boot into the OS. Is there a step I'm missing?
I'm using the custom version of TWRP that you linked to in the first post. I also formatted all the partitions to ext4. Before flashing the rom, I performed the factory reset from recovery and also cleared the /system folder.
I've managed to load on the KitKat version of your ROM just fine...I can't work out what I'm doing wrong!
Anyway, if you need some logs or something to help debug the issue, let me know. Or, if I'm doing something wrong, could you please let me know? I'm very keen to try Lollipop!
Thanks.
Could some1 possibly upload a video of this good work ? Got a maguro and I'm very curious
thx in advance!
lollipop build 2
Haven't seen anybody ask... In your changelog for lollipop you said the rom takes a VERY LENGTHY FLASH TIME. Are we looking at 5 minutes or more?
edit: VERY LONG... over 5 minutes for me
This is the best rom ever!
When you said, "These builds are very early! They aren't daily-driver-stable, but they are progressing extremely fast." I was expecting junk, then I tried it. I was a big fan of your kit kat rom as well but once I tried this android l rom I fell in love. I have used this all day and it is extremly stable. The only bug I have to report that isnt even a need is the app drawer is the app drawer animation is very laggy. I tried enableing 2d gpu acceleration just in case that had something to do with it but it still didnt help. Any suggestions would be great. Oh and yes I have tried closing other apps, multitasking is no issue with this rom, the memory management is great. I thank you so much for such a great rom, keep up the amazing work.
Installing TWRP Problem
So I am currently on CWM and am trying to switch over to TWRP. I'm have a slight problem. When I install TWRP (via twrp manager app), I am also using the recommended custom twrp from the first post. It installs successfully, then I go into reboot options and reboot into recovery...and it's still CWM. I've tried it multiple times. I am rooted, I do have busybox installed, I can't figure out what the problem is. IM STUCK WITH CWM, HALP!
Mondos said:
So I am currently on CWM and am trying to switch over to TWRP. I'm have a slight problem. When I install TWRP (via twrp manager app), I am also using the recommended custom twrp from the first post. It installs successfully, then I go into reboot options and reboot into recovery...and it's still CWM. I've tried it multiple times. I am rooted, I do have busybox installed, I can't figure out what the problem is. IM STUCK WITH CWM, HALP!
Click to expand...
Click to collapse
Download the file in the OP for FML (twrp 2.7.1). Flash with Flashify. Reboot to recovery.
Don't worry too much about it not working. It's fully working for me but it's pretty slow when you actually need to use it. If you get it going it will pick up the pace, but it's far from usable, being in an app for longer than a minute and touching the home screen button will freeze it up for 10 seconds before it takes you to an empty screen that takes another few seconds to load all the apps and widgets back in. I'd wait for a newer release.
Feedback
Hello i have tried the older version and it was great but i really need my camera so i went back to 4.4 but i appreciate you so much thanks !
Please fix the camera asap and i will definitely install this rom ! and i tried to install the new version but it said Error Binary something in TWRP recovery what can i do thanks!
Q
Is the camera fixed yet?
Notification Light
Is there a way to disable the notification light while the phone is plugged in via USB? It's a little annoying to be on while I'm sleeping. It's not a huge issue though.
TheIbanez97 said:
Is there a way to disable the notification light while the phone is plugged in via USB? It's a little annoying to be on while I'm sleeping. It's not a huge issue though.
Click to expand...
Click to collapse
I don't think so.
I found that the miscellaneous section of the battery stats was taking up most of the battery usage. I don't have any apps installed other than the stock standard.
Hello everyone,
I want to start by saying that this is my first post on xda, having just signed up a few minutes ago. I tried to search for any inquiries that were similar to mine, and couldn’t find any, but I may have missed them so I apologize if that’s the case, and I’m really not even sure if this is the correct area to post this in. Once again, I’m sorry if it’s not right. I also should say that I’m not very knowledgeable in the area of rooting, and flashing roms, and I’m sure that you guys know much more than me. That having been said, you’ll have to bear with me and my lack of understanding if that’s okay, as I’m pretty limited. I've encountered a problem with my GS3 (Galaxy S3) today, where it now gets stuck in a boot-loop every time I try to turn it on. Prior to that happening, I was running the stock, unrooted AT&T android version that was released in May (4.4.2 I believe?), and I had been having a lot of problems with performance and battery life. But as I had had the phone for over two years (I bought it in November 2012), I simply thought that it was slowing down and I thought it could possibly stop working, but as I said, I’m no expert. Back to earlier today, I was using the phone as I normally do (texting, light web-browsing, etc.), when I heard the notification tone indicating I had received a text. I picked up my phone, pushed the lock/power button to turn the screen on, and it said something to the effect of (I wish I had written it down, but I didn’t think to at the time) “software broken, you’ll need to factory reset your device” (that’s very much just my recollection, so I may have it completely wrong), along with a prompt to reset it. I touched that, and it just shut off. I tried to turn it back on, and it would keep shutting off after about 15-20 seconds. But I was able to get it into both recovery and download mode – just not booted up. So I thought to (probably stupidly) try to flash a rom, and I’ve tried several since that time (my phone won’t mount as a device on my laptop, thus preventing transfers, though I was able to get around this by using a micro sd card adapter and putting the card in that, then transferring the files to the card). But the first I tried – and was successful in flashing was called AOKP 4.4.4 (Kitkat) made by Task650 from 9-10-14. I’ll try to post the link to the thread that I used to research it. http://forum.xda-developers.com/showthread.php?t=1766684. As I’ve always been on touchwiz, I found out after I flashed it that I had to download the gapps package, which I tried to do from this link https://plus.google.com/+SeanHacker/posts/AGq2b8YwjXB . I downloaded that and tried to flash it by following this guide http://android.stackexchange.com/qu...he-gapps-package-after-installing-cyanogenmod . I’m sorry if I’m not organizing this in the right manner, but I’m doing my best! So anyway, I installed it from zip within clockwork mod recovery and then cleared the cache and dalvik cache afterwards, as the person in the above link said to. Then, I tried to reboot and that’s what I got stuck in the boot-loop. I left my phone for 30-35 minutes thinking it might’ve been taking awhile because I’d just tried to install the google apps. But it never did seem to do anything. Since that time, I’ve tried installing the stock rom (which I downloaded here: http://stockroms.net/file/GalaxyS3/SGH-I747/StockROMS.net-SGH-I747_ATT_1_20120522193451.zip) through odin and the recovery mode installation, cyanogenmod 10.2.1, and synergy r484 ( http://downloadandroidrom.com/file/GalaxyS3Verizon/roms/Synergy/Synergy-S3_19Apr13_1622_r484_s.zip ), all of which have been unsuccessful. The closest I got to being complete was going through the aroma installer for synergy, before trying to install and getting the message “Something was not successful during rom install. You will likely have a non-booter if you see this. If it constantly happens press save log in aroma and report this in xda thread.” (I didn’t know how to save the log and post it here). So that’s about everything that’s happened up until this point, and I apologize if my rambling is hard to follow lol. I just didn’t know what else to do. I’m very scared that I’ve bricked my device and that it won’t work anymore. I’m out of ideas, so I would greatly appreciate any and all help and/or input! Thank you very much for your time!
* Here is the link for the multi-window guide: http://www.howtogeek.com/189345/how-to-get-multi-window-multitasking-on-any-android-phone-or-tablet/
ok , let me get the ball rolling but not real knowledgeable myself.
1) do you know your bootloader and modem version.?
2) not bricked as long as it still can get in a bootloop.
3) sometimes (if were lucky) you can do the 'pull-battery' trick., pull battery out , wait a minute or so , put back in , do the button thing to get to recovery (power, volume up and home at same time).
(i , personally , would probably do a complete wipe and try to install the CM 10.2.1 zip to at least have my phone up and running. you still wont have gapps but you can get that after your phone is back up).
hopefully (!!!) someone more knowledgeable will chyme in , cause the battery pull trick is a maybe/maybe not. sorry dont have more right now. good luck.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Since your phone was running 4.4.2, do not attempt to flash any ROMs using that attempt to downgrade your bootloader to anything prior to 4.4.2.
Try this to get your phone up and running:
download the latest CM11 for the d2lte and save it to an external SD card: https://download.cyanogenmod.org/?device=d2lte
dowload the latest tar.md5 version of Philz Touch for the d2lte from here: https://goo.im/devs/philz_touch/CWM_...Edition/d2lte/
boot phone in download mode, open Odin 3.07, do not check anything except f.reset.time, flash Philz via PDA box, remove USB cable when you see the word Reset appear in the status window, remove battery, replace battery, boot into recovery, format system, Dalvik, data, and cache, flash cm11, and reboot.
thank you audit13 , i was really reaching. lol. to heck with mighty mouse. its "mighty-aidit13 here to save the day". :good:
"all i can really do , is stay out of my own way and let the will of heaven be done"
Thank you both so much!
I'm sorry, but I don't know my bootloader or my kernel version, unfortunately. I've got a lot to learn, and this happening clearly proves that lol. I will try that with cm right now, and let you know how it goes! Should I download the latest nightly or the latest stable version? I'm sorry for all of the questions!
questions are o.k. its how we learn. (& keep from jacking up our phones.lol).
get the latest nightly.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Thank you
mrrocketdog said:
questions are o.k. its how we learn. (& keep from jacking up our phones.lol).
get the latest nightly.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
I appreciate your patience. I don't know if I could be so kind and forgiving if I was in your shoes right now. I just feel like a total idiot for not seeking advice before I flashed the initial rom.
The latest nightly or stable will do. You just want to get your phone up and running with a ROM.
It was successful!
I flashed cm and it worked! It is seemingly fully-functioning right now (I haven't noticed anything that isn't working), but I have two more things I'd like to ask about, if you don't mind. First, and this is the more important one to me, is getting the gapps if that's at all possible (though I'm a little hesitant about it), though I can live without them. I would post the link to the aforementioned gapps guide, but I cannot post links in replies right now as I do not yet have 10 posts, but I will try to edit the initial post. Since that’s where I ran into the problem initially, it’s may not a good idea to follow that link’s instructions. Secondly, one thing I'd like to do – seeing as this is my first non-touchwiz rom – is get multi-window installed on this rom, if I can do that. There was a link I was reading up on, though I don’t know how accurate or “safe” it is. I will edit the initial post with the link if I can. I feel bad for having all of these different problems and questions, but you guys are lifesavers. For all I knew, I’d be stuck with an expensive paperweight from this point on, so you guys really helped me so much!
http://wiki.cyanogenmod.org/w/Google_Apps
here is a link for CM 11 gapps.
dont know about multi-window , my phone is very bare bones (not even gapps).
"all i can really do , is stay out of my own way and let the will of heaven be done"
Confirm the bootloader and modem on your phone using the Samsung Info App from the Play store. Once you have this information, you can look for TW-based ROMs in the development threads that are compatible with your bootloader and modem.
I haven't had an s3 for over 10 months so I can't comment on the availability of the multiwindow function in CM ROMs.
That's very much appreciated!
Thank you so much! Would you mind looking at that link that was edited into the first post to tell me if the procedure itself is correct? I just don't want to take any chances!
Okay, I will do that as soon as I get the gapps installed Thank you so much again for all of your help!
chevrolet1234 said:
Thank you so much! Would you mind looking at that link that was edited into the first post to tell me if the procedure itself is correct? I just don't want to take any chances!
Click to expand...
Click to collapse
if your talking about the flashing guide for gapps , it looks correct. you flash gapps from recovery just like you did the CM11 rom.
"all i can really do , is stay out of my own way and let the will of heaven be done"
The Xposed Framework will do what you want to do. If you want to try CM12, Xposed will not work as it has not been updated to work with Android 5.0.
I recommend setting up your ROM with all of the apps and settings you like. Once you have done that, boot into recovery, create a nandroid backup, boot into the ROM, install Xposed Framework and play with it. If something goes wrong, boot back into recovery and restore your nandroid backup which will undo everything you did since you create your backup.
audit13 said:
The Xposed Framework will do what you want to do. If you want to try CM12, Xposed will not work as it has not been updated to work with Android 5.0.
I recommend setting up your ROM with all of the apps and settings you like. Once you have done that, boot into recovery, create a nandroid backup, boot into the ROM, install Xposed Framework and play with it. If something goes wrong, boot back into recovery and restore your nandroid backup which will undo everything you did since you create your backup.
Click to expand...
Click to collapse
audit , are you on the right thread ? just askin. lol.
poor audit , spread thin !
"all i can really do , is stay out of my own way and let the will of heaven be done"
audit13 said:
The Xposed Framework will do what you want to do. If you want to try CM12, Xposed will not work as it has not been updated to work with Android 5.0.
I recommend setting up your ROM with all of the apps and settings you like. Once you have done that, boot into recovery, create a nandroid backup, boot into the ROM, install Xposed Framework and play with it. If something goes wrong, boot back into recovery and restore your nandroid backup which will undo everything you did since you create your backup.
Click to expand...
Click to collapse
Okay, thank you so much, and I'm fine with staying on CM11, I think. Yes, I was talking about the gapps guide in the last post; sorry I didn't clarify it better haha. Is there a way to create the nandroid backup onto my micro sd card?
there is in twrp. dont know about cwm , but should be though.
"all i can really do , is stay out of my own way and let the will of heaven be done"
chevrolet1234 said:
Okay, thank you so much, and I'm fine with staying on CM11, I think. Yes, I was talking about the gapps guide in the last post; sorry I didn't clarify it better haha. Is there a way to create the nandroid backup onto my micro sd card?
Click to expand...
Click to collapse
You should be able to specify the backup location in recovery. For me, I tend to save it to an external SD card and make a copy on your computer for safekeeping.
Thank you and I'm sorry! This is just all so confusing to me, and I'd be completely lost without both of you helping me!