Related
Is the earth screen protector as good they say it is for the gs3?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
I have one and I was quite skeptical but it has turned out to be really nice. I'm partial to the glass screen protectors but I have no problems with it.
It comes with 2x protectors and easy as anything to put on. The surface is really sticky, grabby at first but after a day it's smooth like butter. I guess because of your finger oils?
It's only been 2 days for me but it's holding up pretty well.
I also bought it and is very smooth on the screen after a day of use.
My protector does have a very very small (maybe 0.5mm) edge of the protector sides and bottom that didn't stick. (again this is because the curved glass I think) Although the protector is made to fit, the protector ends almost at the end of the screen on the sides and that's where mine has that small lifted area.
If you are one of those guys that are expecting something to the absolute perfection (like me lol) then you will see it.
I don't think this a defect product or that it will create bubbles but if something (like oil) gets under that lifted edge I am going to be disapointed.
This is not my first dry protector I have installed in a phone so if this protector doesn't last I will buy a wet install protector instead.
While looking for screen protectors, the ringbo one was the only one on amazon with good reviews. I ended up spending the $12 for it and it turned out very nice. It doesn't cover the whole screen because the S3 has curved glass but it completely covers all important areas on it.
I bought 2 other screen protectors and they didn't fit nearly as well so I'd definitely recommend the Rearth Ringbo. However, they have been experiencing issues with the tabs on the top layer of the screen protector not peeling off. If you have one of these, you can just call them up and they will send out a replacement.
I am currently using one, and it is fantastic. As others have mentioned, my finger would catch frequently the first day. However, now it is completely smooth. It is very clear, and I only notice it being there around the edges and not on the actual screen. Highly recommended!
Is it just me or is it hard to find a screen protector that covers the entire front for the GS3??? I've been to Bell, Rogers and videotron and all 3 had a screen protector that were too small, it seemed to be cut out for the GSIII but left the bezel unprotected and made it more than annoying to swipe on your screen, I purchased 3 in-store and 1 on ebay and all of them, different brand but they were all the same, the covered just the screen and left the bezel nude. I finally had no choice, i was so tired of buying screen protector and havong to return them that i bout the 30$ Zagg Invisible Shield HD at bestbuy. This was the only one that was large enough to cover the front of the phone.
It's not just you; it's due to the fact that the screen for the SGIII is curved (similarly to that of the Galaxy Nexus). The only protector I'm aware of that compliments this feature is the upcoming Steinheil Curved Crystal: http://www.spigen.com/cell-phone/sa...creen-protector-steinheil-curved-crystal.html
well, it might be curved but that doesnt prevent people to make their screen protector 2mm wide on each side. I mean again, the screen might be curved but its barely visible, it not practically invisible. The Galaxy Nexus has a visible curve, but not the GS3
He provided a link above to what you want.
And the issue with the curve and a regular screen protector is that it will not properly stick to the curved edges - which was the issue with the nexus as well and thats why most of its screen protectors are cut short too.
The previous version of the ultra crystal did not stick to the edges of the screen due to the curve so they redesigned it to be the one he posted above.
It does not matter if the curve is visible or not, there is a curve.
lol this thread should be locked immediately... Try searching sometimes. It has been posted numerous times that the only covers that fir the whole screen at the moment are the wet install ones like Zagg.... Regular static cling one do not work because the are made from ridged material and are one FLAT piece which will not stick to the curved down sides..
SGP Flex HD covers the entire screen, but it's a wet install. It's close to impossible for a dry install cover to do full screen due to the curves.
Sent from my SGH-T999 using Tapatalk 2
Wet install protectors will cover the whole screen, dry install protectors won't. Simple as that
ATT's dry static cling screen protector made by "Moshi" does. I have had it from day one and I like it. I mean its not cheap but it gets the job done! I might install a ZAGG protector one day but not yet. I like the one I currently have.
yeah i hear you..i just installed a nano clear love it but not full on the corners..this will solve it..pre ordered
http://www.spigen.com/cell-phone/sa...creen-protector-steinheil-curved-crystal.html
Most screen protectors that are short of covering the whole screen these day are made that way on purpose, so that if you put on a case that grasps the bezel and or over a portion of the screen's edge, it won't lift up the protector..
I have tried about 3 protectors so far, and always end up taking them off and feeling happier. Seems like they all either feel too weird on my finger, peel too easily, or in one case it was good for a little but over time had too much indents and the look of small warping in spots. As soon as I take one off, screen looks better, and feels better. I know gorilla glass can be scratched but I really wonder if a screen protector is truly necessary. If I never bring the phone in contact with sand or diamonds is there anything else I need to worry about? Also, will a screen protector help prevent the screen from cracking if the phone is dropped?
sfetaz said:
I have tried about 3 protectors so far, and always end up taking them off and feeling happier. Seems like they all either feel too weird on my finger, peel too easily, or in one case it was good for a little but over time had too much indents and the look of small warping in spots. As soon as I take one off, screen looks better, and feels better. I know gorilla glass can be scratched but I really wonder if a screen protector is truly necessary. If I never bring the phone in contact with sand or diamonds is there anything else I need to worry about? Also, will a screen protector help prevent the screen from cracking if the phone is dropped?
Click to expand...
Click to collapse
I agree. I have a Zagg screen protector on my S3, and recently bought an Incipio case (which I love), however, the screen protector is peeling off in the corners, which makes it look ugly. Probably going to rip it off soon.
Agreed.
So far I've tried:
1. Skinomi -- Wet protectors suck. They produce a "rainbow glitter" effect on the screen, you notice it especially when its white.
2. Diztronic/cheapo -- The outward curved screen causes cheapo protectors not to lay flat.
3. SGP Nano 3pack -- Doesn't offer much protection. I screwed up the 1st one putting it on, and the 2nd one I managed to put scratches in it with their damn PLASTIC air bubble removal tool!
Oh well, 90% of the scratches on my Galaxy S1 were from me being lazy and putting the phone on surfaces screen-down. Having a case with a large lip around the edges will prevent a majority of the scratches (I already keep one pocket dedicated for phone-only).
I have the spg Nano on and it does get scratched easily. On the other hand I have a friend with the same phone so we split a pack and did rock paper scissors for the 3rd screen protector.
Sent from my SGH-T999 using xda app-developers app
Can't stand some screen protectors. The Zagg and those expensive ones have the orange peel effect and can get indents which is ugly. The wet apply ones have the rainbow affect and the cheap ones come off easy and don't protect lol. I've said screw it. So far I have no scratches and my case keeps the screen from surface contact. Whatever.
Sent from my SGH-T999 using xda app-developers app
I'm using the one provided with Otter box and aside from it smearing easily and having to wipe it off quite a bit, its not too shabby considering I usually liken screen protectors to raincoats. BTW if you're looking into a case, an otter box is pretty good. A bit pricy ($35 from Fry's), but so far solid. Not to mention it raises the edges making it difficult to irritate the protector/start peeling
Sent from my SCH-I535 using xda app-developers app
jnadke said:
Agreed.
So far I've tried:
1. Skinomi -- Wet protectors suck. They produce a "rainbow glitter" effect on the screen, you notice it especially when its white.
2. Diztronic/cheapo -- The outward curved screen causes cheapo protectors not to lay flat.
3. SGP Nano 3pack -- Doesn't offer much protection. I screwed up the 1st one putting it on, and the 2nd one I managed to put scratches in it with their damn PLASTIC air bubble removal tool!
Oh well, 90% of the scratches on my Galaxy S1 were from me being lazy and putting the phone on surfaces screen-down. Having a case with a large lip around the edges will prevent a majority of the scratches (I already keep one pocket dedicated for phone-only).
Click to expand...
Click to collapse
Haha that's funny, because I do the exact same for my pocket as well! I'm using diztronic protector and it sucks major balls!
When I get my now replacement white s3. My phone will be naked
Sent from my SGH-T999 using xda app-developers app
I'm not sure about the rest of you, but for now it seems like we can't get a good screen protector for the S3. All the flexible film based protectors dent too easy. This includes protectors like the SGP Curved Crystal. This review below clearly shows what I mean about easily denting. It also has issues with tight fitting cases.
Then if we go for a screen protector that doesn't dent so easy, they end up not covering enough of the screen. The SPG Ultra Clear nano and Ultra Crystal (2nd version) both don't dent like the Curved Crystal, but they don't cover enough of the screen. Especially the sides. So swiping near the edges you can easily feel the ridge. Ruins the smooth experience of the S3. Would be nice if Spiegen does a revision of the Curved Crystal like they did with the Ultra Crystal and made it so it didn't dent so easily. I definitely don't want to go with tempered glass as its just too thick. I am currently using a Realook Flex Film, and it covers the whole screen nicely, but has orange peal and dents easy just like the other flexible films out there. Realook now has a "3D forming crystal clear" protector. It covers the whole screen and uses their PET material for the main part of the screen, which should prevent the denting effect. I'll give this one a try, if it's not that great, I may just use no protector and go with a flip case. Anyone else have any suggestions.
Here's a pic of what I mean with not covering the whole screen for the Spigen SGP screen protectors.
This is what I just bought.. not sure when it's going to arrive but it should fit your criteria better?
http://www.ebay.com/itm/261072327014?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Ignore that link. I just recieved it and it doesn't cover the whole screen completely.
Search for the threads. There has been plenty of this
Sent from my SGH-T999
Xcor3 said:
Search for the threads. There has been plenty of this
Sent from my SGH-T999
Click to expand...
Click to collapse
To be honest, I've searched far and wide through the threads and Spigen seems to be the protector of choice. But once I look at reviews of those protectors elsewhere (like the YouTube video I posted) I end up seeing that they're not that great. I'm beginning to think that we have to go with either the flip cover protector or go with a hard film protector that doesn't cover the whole screen in order to get that glass like experience. All the soft film based protectors just dent to easy or have some orange peel effect. It just ruins the beautiful display of the S3.
Tempott said:
I'm not sure about the rest of you, but for now it seems like we can't get a good screen protector for the S3. All the flexible film based protectors dent too easy. This includes protectors like the SGP Curved Crystal. This review below clearly shows what I mean about easily denting. It also has issues with tight fitting cases.
Then if we go for a screen protector that doesn't dent so easy, they end up not covering enough of the screen. The SPG Ultra Clear nano and Ultra Crystal (2nd version) both don't dent like the Curved Crystal, but they don't cover enough of the screen. Especially the sides. So swiping near the edges you can easily feel the ridge. Ruins the smooth experience of the S3. Would be nice if Spiegen does a revision of the Curved Crystal like they did with the Ultra Crystal and made it so it didn't dent so easily. I definitely don't want to go with tempered glass as its just too thick. I am currently using a Realook Flex Film, and it covers the whole screen nicely, but has orange peal and dents easy just like the other flexible films out there. Realook now has a "3D forming crystal clear" protector. It covers the whole screen and uses their PET material for the main part of the screen, which should prevent the denting effect. I'll give this one a try, if it's not that great, I may just use no protector and go with a flip case. Anyone else have any suggestions.
Here's a pic of what I mean with not covering the whole screen for the Spigen SGP screen protectors.
Click to expand...
Click to collapse
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
I use the screen protector that came with my otterbox case and it has served me well so far. It doesn't cover the whole screen but then again, if it did it would come off when I used a case.
werked said:
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
Click to expand...
Click to collapse
I use the genuine Samsung Super Slim case which I feel gives the scratch protection I need for the back and sides of the phone, while adding practically no bulk to the phone. So an edge to edge screen protector would have no issues for me. If only Spigen would use the same material they use for the Ultra Nano or Ultra Crystal in their Curved Crystal protector it would be perfect. It's really too bad the Curved Crystal dents/creases so easily as shows in the above video.
I like what zagg did for the iPhone. They make a case friendly screen protector. I like having that option. If you plan to use a case then it's a perfect choice. If going to use no case or a snap on case then a regular screen protector suits just fine. It would be nice for companies to show android some love in this respect of options.
werked said:
You are correct, the Ultra nano does not cover the entire screen. Really though, it makes it perfect for use with a case. The amount no covered is so minimal when using most cases that it's not concern, for me anyway.
Click to expand...
Click to collapse
you can pick up the SGP Flex HD. They cover the entire screen, and is hard to see that it is actually there. It feels smooth as well. Also it doesn't leave much finger prints on there
It seems you haven't looked hard enough, I have a thread on a skinplayer 3D mask film, 99.5% full coverage and has a self healing surface, flexible PET screen protector.
I use the zagg invisishield. Best one I've used yet. I also use it on my tablet. It's more expensive, but worth it. Of course I got mine from best buy the second day the phone was out. So there were only two to choose from ,and I didn't want to wait for one to be shipped to me.
It's designed to fill itself in for minor dents and scratches (I possibly butchered that explanation, but I think you understand). Also, it can be removed and reapplied.
The best part though, is that it's so clear it doesn't detract from the screen. In the past when I would use a screen protector it would always look like a filter was on my screen. Hated it. They've come a long ways in that aspect.
Sent from my SPH-L710 using xda app-developers app
I noticed nobody mentioned Wrapsol. Their ultra line is pretty tough. It comes with a back protector too.
adamdavidson said:
I noticed nobody mentioned Wrapsol. Their ultra line is pretty tough. It comes with a back protector too.
Click to expand...
Click to collapse
not 100% coverage, but excellent quality.
I hate when people ask about screen protectors because that means they obviously don't know about the best one out there. It is called clear-coat. Google it. Ive had it on all my phones. It is perfect. It doesn't come off unless you peel it off and leaves no residue behind. Most malls have a station that sells it and puts it on for you. If you watch videos of it you will see a guy scratching his iphone against rock and then peeling it off and no marks on the screen. Best way to go by far. It is also covered by a lifetime guarantee.
Skinomi - - - - very nice!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Seidio
Sent from my HTC EVO 4G ELTE using Tapatalk 2
Can't believe no one said real look screen protectors.
Sent from my JellyBean Galaxys3
Vikuiti!
I'm currently using Vikuiti screen protectors, and they're working out pretty well. It attracts fingerprints a bit, but nothing a quick wipe doesn't get rid of~
I'm not really so sure why everyone is so worried about the very edges of the screen that the Ultra Nano doesn't cover. It's a great protector that you can barely even tell is there, and it covers all of the important and useful parts of the screen just fine. I've been using it for 2 months and it still looks great, plus I've had no issues at all with scratches on the edges that aren't covered. Using it with a Diztronic TPU case. Put a case on your phone and the combination seems perfect to me.
I've been using vikuiti ( a less mentioned brand for screen protectors I think) and it's been working perfectly fine with the genuine galaxy s3 clear TPU case. No scratches on the phone or screen protector, I never really understood how people had to cycle through so many screen protectors. Best of luck to you finding your preferred sp!
Hi everyone. I searched the forums for screen protectors, and what I found was a whole lot of threads on various screen protectors out there, but nothing centralizing these discussions. So I thought I'd create this thread.
1. What type of screen protector do you use?
2. How has it held up?
3. Have you gone without a screen protector?
4. If so, do you have any scratches?
5. What's the most you have paid for one?
6. What's the cheapest you have paid for one?
7. Any Rants? Any Raves?
8. Any you would recommend?
9. Any you would want to try?
10. Any tips to putting certain ones on?
Let's help each other out by sharing our knowledge on screen protectors for the HTC One.
Top screen protectors according to you guys.
1. Mime Feather Glass Screen Protector - $27.95 http://mimeusa.com/product/htc-one-feather-glass-tempered-glass-screen-protector/
2. Zagg Clear HD Screen - $19.99 http://www.zagg.com/invisibleshield/htc-one-cases-screen-protectors-covers-skins-shields
3. Verizon 3 Pack Anti-scratch Protectors - $12.99 http://www.verizonwireless.com/acce...-protectors-3-pack-w-screen-wipe-for-htc-one/
Installation videos
1. Android Authority demonstrating how to install wet and dry screen protectors such as the Zagg and ScreenWear http://youtu.be/sf0a-c7WH8U
2. Danny Winget demonstrating how to install a glass screen protector such as the Spigen Glass http://youtu.be/F4_wtcmWVv4
Reviews via Amazon
1. Zagg HD http://www.amazon.com/ZAGG-HDHTCM7S...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
2. Zagg Original http://www.amazon.com/ZAGG-HTCM7S-i...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
3. Mime Ghost Glass http://www.amazon.com/MIME-Tempered...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
4. AmFilm http://www.amazon.com/Protector-Inv...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
5. Tech Armor http://www.amazon.com/Tech-Armor-De...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
6. Skinomi http://www.amazon.com/Skinomi-TechS...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Drop Test
1. Zagg Shield drop test http://youtu.be/NxcUMZ4bTCM
2. Tempered Glass drop test http://youtu.be/33T1Qun7jsQ
Zagg HTC One High Def Screen Protector - Amazon
I think Zagg makes the best screen protectors, I have used them on both the HTC Droid Incredible and the HTC One. The Zagg screen protectors are not the cheapest option for screen protectors especially if you go for the ultra clear model but I think the cost is worth it, especially since zagg offers warranty replacements, you only pay for shipping. With the warranty replacements, registering your product on the Zagg website is quick and easy, there are no serial numbers you need to have or anything, you only need to tell them what device you got it for and which model screen protector you got.
Another benefit of the zagg shields is the lifetime of the screen protector, in my experience the screen protectors lasted almost 2 years for my Droid Incredible before I replaced it, the screen protector started to come off around the edges of my phone. While the screen protectors do age, I would much prefer the aged screen protector opposed to any damage to my screen. In my entire life of my Droid Incredible, bought in April 2010 and still used as an e-reader by my girlfriend today, there is not one scratch on the screen thanks to the Zagg shield.
While I have not personally tried the Verizon 3 pack of screen protectors, I have had friends use them and they were disappointed with the quality of them, the biggest issue was having the screen protector stay on.
Zagg screen protectors have done such a great job in my opinion I have not wanted or even thought of trying another brand.
As for tips to putting the Zagg brand on, make sure you wash your hands before you do anything, clean the screen so their is no oil, fingerprints, dust or anything else on the phone, make sure the spray gets on both the screen protector and the screen but do not soak either, just enough spray to cover the phone and protector. I found it best when applying the screen protector to start at the top of the screen in one of the corners and work your way to the opposite top corner then work your way down, make sure to use the applying tool they put in the packaging, be sure to use a good amount of force when use the tool but be careful not to apply too much pressure and crack the screen.
If you do not want to try putting the screen protector on yourself, you can go to the Cell Phone employees at Best Buy and have them put the screen protector on. You do not need to purchase the protector from Best Buy, but they charge you a fee to do it. The major benefit of this is that if they screw up and ruin your protector they will replace it.
I tried the Verizon 3-pack when initially purchasing the one. While they are decent, I knew I wanted something a little more rugged.
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent. I tested car keys, nails, and knives on the screen protector after applying it to the phone and absolutely no marks showed up. It fits perfectly to the parameters of the screen and is hardly noticable after application. I would highly recommend this product. I ordered it from the Mime USA website for about $28, they even threw in a code for free shipping!
Sent from my HTC6500LVW using xda app-developers app
I usually don't use screen protectors and whenever I put on a case, I take it off an hour later. I've had the phone for like 9 months now and the screen is fine. There are tiny little scratches but you can't notice them unless you try really hard to, they don't affect the clarity of the screen in any way. I just don't like using screen protectors because they attract finger prints and smudges so easily even when I try a more expensinve screen protector. Honestly the screen will be fine for a long time. Yes there will be extremely tiny scratches but you won't care because they're almost non-existant. But one thing to keep in mind though, is that sand is crazy harsh on the screens, so I'm extra careful when I go to the beach with my phone. That's when I suggest putting on a case and a screen protector. Because even if a tiny bit of sand getes in your pocket, it might cause a little damage. Right now my phone is brand new since I got it replaced because of a camera issue, and I just can't get myself to stick with putting on a case or screen protector, I had a screen protector on it but I took it off 2 weeks later because I miss the naked screen.
Spitfire91726 said:
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent.
Click to expand...
Click to collapse
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
i'm using an invisible shield screen protector. Went on pretty easy, there were no bubbles, and it's pretty thick. I've only had it on for a week, so I can't say much about durability, but it's pretty good as far as a screen protector goes. I'm still very partial to those matte finish screen protectors, so i'll probably be picking up one of those in the future.
BygSii said:
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
Click to expand...
Click to collapse
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
tyler.durden said:
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
Click to expand...
Click to collapse
+1 what he said, minus the experience with Spigen. The MIME Feather is the first glass screen protector I've tried, and I don't think I'll ever use anything else. It's superb and well worth the premium price. With that on the screen and a Ballistic Shell Gel case on the rest of the phone, I don't worry about it too much.
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
astmacca said:
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
Click to expand...
Click to collapse
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
xzyragon said:
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
Click to expand...
Click to collapse
Its definitely putting another layer of glass on the screen. You have to be careful and get it in the right position 1st time as they dont move around once stuck down. Removing them without breaking is, i suspect, very difficult. The "tape hinge" method of application works pretty well.
I have found the touch sensitivity on mine to be great. Certainly there is no difference to the "usability" of the phone, and the smoothness an feel is as good as the original screen.
I did read one review where the buttons on screen wouldn't work with a glass screen protector, but that has certainly NOT been my experience. From what i have read the thickness of these has come down from around 0.6mm in early incarnations to something like 0.15mm and being flexible in some brands.
I got a 0.4mm one. No scratches as yet. Its supposed to be very hard (9H??). I had no issues with fitting my case on after installing the screen protector.. Its a cheap silicone and hardback model that provides good corner protection. Hopefully the screen protector will help if it falls on its face sometime.
What about Just Like Glass?
Has anyone tried it?
Didnt know protectors like the Mime feather existed. Will have to try it out.
Xeternall said:
Didnt know protectors like the Mime feather existed. Will have to try it out.
Click to expand...
Click to collapse
Just bought my first one a month ago (MIME Ghost), best screen protector I have ever used. It's definitely scratch resistant and feels like the original screen. Not sure how it will hold up to drops, but that's not something I am willing to test.
Had a friend buy some Write Guard screen protectors for his HTC One. I installed one on his HTC One. Screen protector was all ready getting all kinds of scratches in it. No Bueno.
I used the XtremeGuard screen protector for a very long time on my HTC One, but recently I decided I wanted a matte finish screen protector, so I switched to Tech Armor Anti-Glare. Feels much nicer to me and gets a lot less fingerprints and smudges.
I was using the protector that came with the UG case. After reading this thread, I picked up a MIME. Very impressed. It goes on dry, was easy to remove and reposition and left absolutly no bubles (these drive me CRAZY). It has somewhat finger print resistant and I did not heave to deal with wetting the protector, then waiting 24 hours to see if all the bubles went away. Best screen protector I have purchased and believe me, I have tried at least 20 different types over the years.
I have had no issues with the touch sensitivity. You can't even notice it's on unless you look really closely at the top edge.
Using the screen protector that came with my otterbox comuter and it is quite terrible.
The screen protector has been on since April and it is already deteriorating. The spots where I'd swype, type show heavy signs of use. With a faint finger swipe over the screen you can actually feel the difference.
Other than that, the actual performance isn't the worst. Glare and all in the sun is bad, indoors though I don't have any issues.
Will look into MIME.
Cheers,