Heres a few pics of the casemate case for the s3. I had to go to an at&t store because bestbuy had no accessories (prolly be here on 28th right lol) and i didnt like the sprint ones. And it has a VISOR AG screen protector on it. If your like me and had no clue what these were basically its a screen protector that covers the whole front of the phone not just the screen its self. Its clear for the screen and if you notice its clear not cut out for the back and menu buttons. Then the outer layer is white or blue depending on what color you have. Also this screen protector is fingerprint and bubble free. Normally im an otterbox defender or ballistic HC guy but i gotta admit im liking this
Sent from my YP-G70 using XDA
Looks good. How much? How responsive are the keys?
Sent from my SPH-L710 using XDA
lopezpm said:
Looks good. How much? How responsive are the keys?
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
The case was 35 screen protector 20. To me it was worth it. Ill never get a different screen guard again. The keys still work 100 percent
Sent from my SPH-L710 using XDA
I just ran up to the att store and bought the same setup you did. The grip on the side was most important and it is outstanding. The visor screen cover is excellent as well because there is little to no touch loss. In addition its washable and replaceable. My phone was blue and they only had the white visor, so now it appears white with the white case.
Cons: the stand is very flimsy, but I don't care I never use it.
Loving it, thanks for the heads up.
Sent from my SPH-L710 using xda premium
boglwe said:
I just ran up to the att store and bought the same setup you did. The grip on the side was most important and it is outstanding. The visor screen cover is excellent as well because there is little to no touch loss. In addition its washable and replaceable. My phone was blue and they only had the white visor, so now it appears white with the white case.
Cons: the stand is very flimsy, but I don't care I never use it.
Loving it, thanks for the heads up.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
You have pics of white and blue?
Sent from my PG86100 using XDA
My phone is blue. But, with the white visor and the case it is now white. Looks exactly like the pics in op. Except where the wholes for back and home buttons are now dark instead of white. Kinda cool looking
Sent from my SPH-L710 using xda premium
boglwe said:
My phone is blue. But, with the white visor and the case it is now white. Looks exactly like the pics in op. Except where the wholes for back and home buttons are now dark instead of white. Kinda cool looking
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Lol thats a good way to make the phone look white if you got blue and didnt want it.....i just sold a blue one that i got my gf on craigslist...man i had my white one and the blue one side by side the othrr night couldnt decide which one i wanted to keep
Sent from my SPH-L710 using XDA
I like the blue a whole lot...but I like the phone even better; they only had white. I am loving the case more and more; it is really grippy. When held up to the ear it feels fantastic in your hand (that's what she said)? Just a great case.
Sent from my SPH-L710 using xda premium
Is the headphone port really recessed? I used headphones with an angled connector.
It's an awesome case. I'm glad I got it as well!
It's rubbery where it needs to be, and hard case where it needs to be.
I was also going to pass on it, but the case was so good, I overlooked it.
Sent from my Xoom using Tapatalk 2
I just got it today. I love it so far
Sent from my SGH-T999 using xda app-developers app
I've got the same case, direct from Case-mate (Used code 'tough' for 20% off, not sure if it's still active FYI).
I love the case, with one exception.... that kickstand is damn flimsy and unless you're on a PERFECT level surface, forget about Portrait mode. (And yes the website says it's good for portrait or laandscape).
I've emailed Case-Mate to see if they are aware of the kickstand issues and are planning to do anything about them (like retool to a metal like Seidio)....
I need to find a Seidio one local so I can see it in action to determine which I'll keep for the long haul. This one feels real nice in the hand though.
Still waiting on my screen protectors in the mail.. bought like 3 different brands (2 cheapie and 1 seidio), figure i'll try something new
Product F(RED) said:
Is the headphone port really recessed? I used headphones with an angled connector.
Click to expand...
Click to collapse
Good :
- Rubber grips on the side
- Buttons click well
- Kickstand
- Feels sturdy overall
- Headphone jack area accommodates even the largest jacks.
Bad :
- Kickstand feels flimsy
- Rubber on back peels and stains the back of the case (will wipe off though)
- Back is raised so it doesn't rest on the rubber grips. It'll spin in place.
- Headphone port area cracked a little (tiny) when trying to remove phone from case. In other words, not enough plastic.
Advice: Buy but only in white (Which I have). It scratches easily like Speck cases. You won't see scratches on the white but I guarantee you'll see them all over the black one within 5 minutes of putting it on.
Sent from my GT-I9300 using XDA Premium HD app
I wonder how this will work or if it even will work with a glass screen protector?
First off its called the ivisor. I have had this same setup for over a month now. I got tired of the sp yes it looks good but go out in the sunlight and try to use your phone its impossible to see.
Sent from my SCH-I535 using Tapatalk 2
I've used AG iVisor for a few phones now and they have always been outstanding. I presently have one on a SGS 2, Nokia Lumia 900 and my SGS3.
So I seem to have issue with the SGS3s iVisor. While the iVisor fits well, when I put a case on, it pushes the sides of the iVisor up and away from the screen, simply pushing it off the face of the phone. I have tried 3 different cases (non of which are the same as mentioned in the OP), that being said, the case should not matter...
Has anyone else encountered a similar problem?
I attribute it to the (almost zero edge) construction of the phone. This problem has not occurred on either of the other devices mentioned.
Yes the case does make a diffence some just push up the ivisor I have this problem with many of cases on reason I don't recommended this product.
Sent from my SCH-I535 using Tapatalk 2
I wonder if this case works well with the iVisor iGlaze for GALAXY SIII
It will work but. I'm going to get the glas t sp that just came out and retire the ivisor I'm over the anti glare.
Sent from my SCH-I535 using Tapatalk 2
Watch for cracking in case near the headphone jack. I had to return mine.
Sent from my SGH-T999 using Tapatalk 2
Related
Love it. 6.50 free shipping. Couldn't get white note so this will work
Sent from my GT-N7000 using xda premium
Can you pls share the link? Need to buy extra case
Hows' the fitting and thickness?
It's pretty form fitting . Not much added bulk or weight at all
Sent from my GT-N7000 using xda premium
I have the same case in black. White doesnt look bad.
Sent from my GT-N7000 using XDA App
http://www.ebay.com/itm/White-S-Sha...979619?pt=PDA_Accessories&hash=item27c131a0a3
Sent from my GT-N7000 using xda premium
Have you tried making a phone call with the case on? I bought one of these types of cases for my nexus one, and then nobody could hear me during a call!
Calls are fine for me
Sent from my GT-N7000 using xda premium
picked up one of these:
http://www.ebay.ca/itm/190614374815?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_983wt_1270
hopefully ill get it soon and can post up pics
I'm glad I clicked on this post before posting my own...
I needed a temporary case while I wait for OtterBox to get off their duffs! The Note by itself is pretty thin and slippery for my hands and the back cover was already started to scuff up.
I checked Amazon.com, since I get free shipping through them, and saw the BoxWave DuoSuit case for the Note (which looks exactly like the one posted here, but in black).
http://www.amazon.com/dp/B000H13M2K/
It's a pretty nice case for the money, fit is nice and tight and it definitely makes it more grippy with a little knurled texture on the sides. Definitely not too bulky, I actually prefer it to the naked Note feel. Cut outs are ample so it protects without getting in the way of everything. The power and volume buttons are covered with wide rubber bumpers which is perfect for me because the buttons were too easy to press before. Now it only responds to intentional presses.
Obviously, this won't fit in the dock so it will come off when I put it in my dock at night, but that just gives me a chance to clean the inside of the case and keep it from collecting fluff.
I also dropped the phone just a couple minutes putting on the case and it made a dull padded thud, which I prefer to the clackle of unprotected phone hitting the floor. No notable damage.
I'm pretty happy for a $10 case. It's even almost kind of nice looking (I'm extremely picky).
I have this in black color
I have this case in black and white, and although a very nice case overall, I'm hating it due to it being a lint magnet, the whole screen after a day in my pocket is just covered in felt and dust, especially around the edges of the screen.
I've now ordered a hard plastic case..so disappointed
Received my Trident Aegis case today. Went with the bright green (which I so far prefer to the darker green which they previously used, I had a Cyclops case in this color on my HTC Glacier.)
One gripe is, so far, the open space surrounding the camera on the back of the case. This is an odd decision. Not a big deal to me, though; but still worth mentioning.
The biggest gripe, though, is that the phone is not at all easy to actually get into the case. I'm not saying that it doesn't fit. The problem is that you first place the phone into the colored, gel surrounding piece. You then have to fit these piece (and its protruding buttons) into the very hard and rigid black/grey plastic piece. It's kind of hard to do this since the gel-covered buttons have to fit into the holes on the device, and I ended up hitting the power button over and over again, and botting into recovery because one of the volume rockers was held down.
My Cyclops case, for the Glacier, was designed in the opposite way. The phone first fit into two hard pieces (a front and back piece, basically), and then a black rubber surrounding piece went around the plastic itself. This was really easy to take the phone out of and place it back within.
I know people will ask...I'd say the phone doesn't add too much in the way of size to the already very large S-II, but the only comparison I have is the D30. I do not have the Incipio or Seideio cases to compare.
My aegis case for my vibrant was the same. Its how they all are in terms of getting it on. Waiting for mine to get for the sgs2
Sent from my SGH-T989 using xda premium
my main concern is how well it protects but a close second on how hard it is to get out of the pocket. if im going to spend to cash to get something that would work well i want it to be what i want. any opinions?
So overall how do you feel about the case?
Sent from my SGH-T989 using xda premium
I'd say pocket fitment is mostly contingent upon the pocket. I have been putting the SII + Trident case in the front pocket of shirts and it only sticks out a small bit. It fits in my jeans pockets, but I wear my jeans a bit baggy. It won't fit in the pockets of my dressier slacks. So, I find it easy to get out of most pockets. My Glacier + Trident was actually probably a bit more difficult due to the ribbed silicone surround. The case for the S II doesn't have much to snag on. Keep in mind though, that the Glacier + Case was a lot thicker, front screen to back battery cover, than the S II is. This definitely had something to do with it as well.
Overall I am pleased with the case. I like the color options, shape, and structural design of the case. While I did find the previous "Cyclops" style case that I had for my Glacier to be easier to take off and on, this new case seems, at least at first glance, to provide equal or better protection while also being easier to fit in pockets.
One footnote: I'm using this case along with a Zagg wet application invisible shield and I'm not having any issues with the corners peeling.
What did you pay? Looks sick.
Sent from my SGH-T989 using XDA App
damn just found the case i've been looking for.
+1 to TJBunch1228
How much did you pay for it? And where did you get it?
From http://www.tridenteer.com/products/Aegis-Case-for-Samsung-Galaxy-II-T989-(T%2dMobile)-(Green).html maybe?
yindraad said:
damn just found the case i've been looking for.
+1 to TJBunch1228
How much did you pay for it? And where did you get it?
From http://www.tridenteer.com/products/Aegis-Case-for-Samsung-Galaxy-II-T989-(T%2dMobile)-(Green).html maybe?
Click to expand...
Click to collapse
That is the one I got. paid about $24, I had a code for about 15% off. I just got another code for 20%. Will post it when I find it.
Sent from my SGH-T989 using xda premium
Does this case have a built in screen protector??
¤sent by the juggernaut¤
Daddio06 said:
Does this case have a built in screen protector??
¤sent by the juggernaut¤
Click to expand...
Click to collapse
No, but a screen protector is included.
Sent from my SGH-T989 using xda premium
_eroz said:
No, but a screen protector is included.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Same question I had, it says on product page that it includes a "Re-Applicable Screen Protector".
BTW, coupon code "holiday2011" gives you a nice $7 off!
does the screen protector look to be of good quality?
I also noticed that the plastic doesn't hold/secure the rubber on the bottom of the phone, is it easy for the bottom corners to come off say when you're putting it in or pulling it out of your pockets?
Thanks!
mealekz said:
Same question I had, it says on product page that it includes a "Re-Applicable Screen Protector".
BTW, coupon code "holiday2011" gives you a nice $7 off!
does the screen protector look to be of good quality?
I also noticed that the plastic doesn't hold/secure the rubber on the bottom of the phone, is it easy for the bottom corners to come off say when you're putting it in or pulling it out of your pockets?
Thanks!
Click to expand...
Click to collapse
+2 is the bottom or top floppy lime a basic gel case??
Sent from my SGH-T989 using XDA App
mealekz said:
Same question I had, it says on product page that it includes a "Re-Applicable Screen Protector".
BTW, coupon code "holiday2011" gives you a nice $7 off!
does the screen protector look to be of good quality?
I also noticed that the plastic doesn't hold/secure the rubber on the bottom of the phone, is it easy for the bottom corners to come off say when you're putting it in or pulling it out of your pockets?
Thanks!
Click to expand...
Click to collapse
rosebud1 said:
+2 is the bottom or top floppy lime a basic gel case??
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
The screen protector does look cheap. I'm not using it so I didn't really pay much attention to it. The hard case does not wrap around the bottom, so it is just the gel casing. But I haven't had any issues with the case coming off when putting the phone in my pocket
I really wish otter would make a defender case for this phone! I loved it on my iPhone
¤sent by the juggernaut¤
I paid $22 with free shipping using the promo code holiday2011.
And yes, I got it from the tridenteer site.
i just ordered one... ill compare and take pictures comparing it to my incipio silicrylic case when i get the trident
I put the screen protector on. Used a wet install. Looks great so far. Smooth feel and very clear. It is dark outside right now, so I will report back tomorrow during the day. Looks really good in the house. Just a few air bubbles settling. I can tell they will go away though.
Screen protector is great. Really clear in light and dark. I'm sure there's better quality out there but for free its great. Also I have the green case. Get compliments like crazy about this case. Very high quality and looks pretty sick. Great protection. Great looks. Great case.
FYI the Incipio case has the slight gap around the camera as well.
The only issue I have seen, been using the case about a week, is the flap that covers the charging port doesn't want to stay closed. It doesn't hang down enough to cause problems really but isn't a tight fit and would def let dust in. Other than this small issue the case works great.
So I got this over a week ago and I think I have had enough experience with it to review it. First off this case will not be for everyone. First off, the $50 price point will turn most away. But if you're on the hunt for a great quality leather flip case that's stylish and feels fantastic in the hand, this is the case for you!
Okay first off it does not add so much bulk. It feels smooth. The material feels great. The design both in and out of the case look great. Now this case flip open vertically. There is no magnet. There is a clip that hands onto the little indent on the top of the phone. As you can see in the pics, not everything is covered. A lot of the top is exposes. There are cutouts for the buttons on the side. Very little is exposed at the bottom. If it were to fall bottom first, no damage would be done to the bottom.
The case comes in this fancy little box. Inside the box SGP included not one but two Nano screen protectors (one I installed easily) with a cloth and a little card to push out bubbles.
I have talked on the phone with this thing on. At first it wasn't an issue. But if you tend to walk fast or run while on the phone, the flap will slap you back and forth lol it only happened to me twice but wasn't a big issue
The design is what really caught me. I was gonna get the original SGP Argos but when I seen this, the design just caught my attention. I don't know if they use genuine leather but it sure does smell and feel like it.
Of course this case won't be for everyone. The flap always being open and $55 price point will turn people away. This is not an every day case for me. It is a night life type of case for me. Meaning when I go out at night or go anywhere where I really wanna look good, this case comes with me.
Well that's all I can say about it for now. If anyone has any questions, just let me know. Hope someone out there found this useful
*will post more pics in a moment*
Sent from my SCH-I535 using Tapatalk 2
Sent from my SCH-I535 using Tapatalk 2
More
Sent from my SCH-I535 using Tapatalk 2
I guess few people are interested in a $50 leather case lol
Sent from my SCH-I535 using Tapatalk 2
Its nice but has way to much decoration to it... if I were to get something like this I'd like it to be much plainer.
Sent from my SCH-I535 using Tapatalk 2
They do have a plain black and a plain white one. Its the SGP Argos (I think that's how its spelled
Sent from my SCH-I535 using Tapatalk 2
xXJay_RXx said:
They do have a plain black and a plain white one. Its the SGP Argos (I think that's how its spelled
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Thank you I'll have to look into it.
Sent from my SCH-I535 using Tapatalk 2
Hey the images aren't visible, im looking for a cool cover for my S3
Haven't seen any posts on these cases here thinking about buying one looking for some comments or if anyone owns one maybe they can chime on if they like them. I think they look tight
http://www.pure-gear.com/shop-by-category/signature/px360-extreme-protection-system-for-samsung-galaxy-s-iii-collection.html
http://www.pure-gear.com/shop-by-category/signature/px260-protection-system-for-samsung-galaxy-s-iii-collection.html
I have the px260 and like it. Very solid case. Only negatives are that the headphone jack area is very deep which made it difficult to find one that fit and also that its kind of slick if you just set it on the console while driving it slides around. Also you need to use their screen protector. Reason being is that because the case clamps down so tight a protector that goes to the edges will be pushed up in the corners. Though one of the glass protectors may not have this problem.
Sent from my SCH-I535 using Xparent Blue Tapatalk 2
Thanks for the reply
Would you buy the case again or something else out there that you think looks better ?
bill3508 said:
I have the px260 and like it. Very solid case. Only negatives are that the headphone jack area is very deep which made it difficult to find one that fit and also that its kind of slick if you just set it on the console while driving it slides around. Also you need to use their screen protector. Reason being is that because the case clamps down so tight a protector that goes to the edges will be pushed up in the corners. Though one of the glass protectors may not have this problem.
Sent from my SCH-I535 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
I would buy it again. I also have the ballistic HD case but replaced it with the PX. The only other case I will try out will be the sedio obex once its available. The good thing about the PX case is it is not real thick which I like so not sure if the sedio will be too much for me.
Sent from my SCH-I535 using Xparent Blue Tapatalk 2
The DualTek Extreme Impact is looking pretty nice also cool video off the dealers page
Spent the whole night looking at cases online just got the phone and want to get a case before i drop it
For some reason I keep coming back to the Pure Gear cases I'd take the DualTek Extreme or the PX260 maybe even the PX360
http://www.pure-gear.com/shop-by-category/protection/dualtek-extreme-shock-case-shield-for-samsung-galaxy-s-iii-collection.html
The Dualtek is really nice. It adds some bulk to the phone but the phone is protected for sure. I love that it has a lip that sits above the edge of the screen. The buttons may be a little hard to get used to at first but I have no complaints about it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I like to use a charging dock stand looks to me like the DualTek,PX260 PX360
won't fit them am i wrong ?
Markeee said:
I like to use a charging dock stand looks to me like the DualTek,PX260 PX360
won't fit them am i wrong ?
Click to expand...
Click to collapse
Not sure the port is pretty deep.
Sent from my Nexus 7 using Xparent Blue Tapatalk 2
Does anyone know if the dualtek black backing is matte or glossy like the white version
Sent from my SGH-T999
Looks matted to me in this below video nice case. My issue with it is don't seem to be compatible with any docking chargers and i need some kind of belt clip for when i work
http://www.youtube.com/watch?v=f4-5nUl4nuw
Chedderknight said:
Does anyone know if the dualtek black backing is matte or glossy like the white version
Sent from my SGH-T999
Click to expand...
Click to collapse
So I bit the bullet and ordered it Sunday night from amazon, and I have to say I'm glad I did.
added some pictures:
Left is my Mercury TPU and the right obviously the DualTek
Hey my favorite case from cruzerlite is available for the Optimus G! I have one in the smoke color on the way. If you have never used one of their cases before then you are missing out. They are made of TPU with a cool design and the cutouts are perfectly cut. I've owned a bunch of their cases for my GNex, S3, One S, and Nexus 7. Now im adding the Optimus G to my collection.
Check them out here http://www.cruzerlite.com/cases/lg/optimus-g/cruzerlite-androidified-a2-case-for-lg-optimus-g-sprint
I will post a review of the case as soon as I get it. Also don't mind the At&t logo on the pictures. This is indeed for the Sprint version!
Ya i saw that earlier today. I really want the CM or xda case!
Sent from my LG-LS970 using xda premium
I'd love to see real life pictures! Curious about which buttons have cutouts (the diztronic I have covers the volume, but not power) and how it looks on the front of the phone. Might be trading it for one of these - I really want a blue or green case and I love the Android design on the back
Sent from my LG-LS970 using xda app-developers app
I can post some photos in a few. I have a green one with me.
Sent from my Nexus 4 using Tapatalk 2
There are cutouts for all buttons and ports. Decent case. Sorry I couldn't send more photos, my connection is terrible right now.
Sent from my Nexus 4 using Tapatalk 2
just purchased a blue one will have pics the moment it arrives in 5-7 days
Well I know what case I'll be ordering. Thnx!
Welp I got my case in the mail today, unfortunately its for the wrong phone just my luck!
Sent from my LG-LS970 using xda premium
javskies said:
Welp I got my case in the mail today, unfortunately its for the wrong phone just my luck!
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Me too :-\
Sent from my SCH-I535 using Tapatalk 2
masterxchief said:
Me too :-\
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
damn them! which one did they send you?
javskies said:
damn them! which one did they send you?
Click to expand...
Click to collapse
They sent me the case for that t mobile LG phone. Lp7 or something. Did you create a ticket on their site to get it fixed?
Sent from my SCH-I535 using Tapatalk 2
I got my case as well and it was the wrong one lol...so I called them and for there mistake there sending me a new one plus another case at no charge and I keep the case I got today pretty cool...
Sent from my LGOG!!!!Boom....
masterxchief said:
They sent me the case for that t mobile LG phone. Lp7 or something. Did you create a ticket on their site to get it fixed?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I think that's the same one. Yes I did but I'm might call them so I can an extra free one lol
Sent from my LG-LS970 using xda premium
got an email that they shipped the right one so should hopefully have it here in a few days with a review
Same here, I cant wait. I hope its the right one this time!!
Just got mine in. I had to remove my screen protector cause it was being lifted by the case. So far I really like it. Will post pics and thoughts later
Sent from my LG-LS970 using Tapatalk 2
masterxchief said:
Just got mine in. I had to remove my screen protector cause it was being lifted by the case. So far I really like it. Will post pics and thoughts later
Sent from my LG-LS970 using Tapatalk 2
Click to expand...
Click to collapse
Awesome. Can't wait to see a picture of it actually on the phone lol
Sent from my LG-LS970 using xda premium
So I ended up getting the flu so I didn't get to take the time to take better pictures or write up a good review. For now here are some pictures I took with my s3 and just give a brief review.
The case is thin but feels nice. It adds good grip to the phone without adding bulk. Everything fits just right. No ports or holes are off line. One thing I noticed is on the back there is a sort of wet effect between the phone and the case because the glossy back is sticking to the case. I tried to show that with a few pictures. Not an issue for me but just something to keep in mind. You can see the crystal reflection back faintly through this smoke case.
The sides have a nice ribbing for grip. There are openings for the volume and power buttons which are recessed to prevent accidentally triggering them. I was able to fit the Samsung and LG Usb cables through the microusb port cutout. The headphone cutout is big too so I was able to fit my headphone cable and aux cable easily.
The case is thick enough to reach the thickness of the camera so the phone feels all even which is great. You can put the phone down on its back without worry. On the front you might be able to see that the lip comes around enough to keep the screen from touching anything if it's set down face first. This comes at a price though, it lifts screen protectors off.
Overall the case feels great and looks great, I have their cases for all of my devices. It's very minimal in size so font expect amazing protection but for some who isn't looking for bulk this is perfect. It won't ever stick in your pocket or collect lint. It adds some grip and a cool logo on the back.
I'm still very limited writing this from bed so if anyone has questions or wants more info/pics let me know. I'll add pics of the clear one later.
Sent from my SCH-I535 using Tapatalk 2
masterxchief said:
So I ended up getting the flu so I didn't get to take the time to take better pictures or write up a good review. For now here are some pictures I took with my s3 and just give a brief review.
The case is thin but feels nice. It adds good grip to the phone without adding bulk. Everything fits just right. No ports or holes are off line. One thing I noticed is on the back there is a sort of wet effect between the phone and the case because the glossy back is sticking to the case. I tried to show that with a few pictures. Not an issue for me but just something to keep in mind. You can see the crystal reflection back faintly through this smoke case.
The sides have a nice ribbing for grip. There are openings for the volume and power buttons which are recessed to prevent accidentally triggering them. I was able to fit the Samsung and LG Usb cables through the microusb port cutout. The headphone cutout is big too so I was able to fit my headphone cable and aux cable easily.
The case is thick enough to reach the thickness of the camera so the phone feels all even which is great. You can put the phone down on its back without worry. On the front you might be able to see that the lip comes around enough to keep the screen from touching anything if it's set down face first. This comes at a price though, it lifts screen protectors off.
Overall the case feels great and looks great, I have their cases for all of my devices. It's very minimal in size so font expect amazing protection but for some who isn't looking for bulk this is perfect. It won't ever stick in your pocket or collect lint. It adds some grip and a cool logo on the back.
I'm still very limited writing this from bed so if anyone has questions or wants more info/pics let me know. I'll add pics of the clear one later.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
thanks for the pics and review:good: cant wait for mine now
masterxchief said:
So I ended up getting the flu so I didn't get to take the time to take better pictures or write up a good review. For now here are some pictures I took with my s3 and just give a brief review.
The case is thin but feels nice. It adds good grip to the phone without adding bulk. Everything fits just right. No ports or holes are off line. One thing I noticed is on the back there is a sort of wet effect between the phone and the case because the glossy back is sticking to the case. I tried to show that with a few pictures. Not an issue for me but just something to keep in mind. You can see the crystal reflection back faintly through this smoke case.
The sides have a nice ribbing for grip. There are openings for the volume and power buttons which are recessed to prevent accidentally triggering them. I was able to fit the Samsung and LG Usb cables through the microusb port cutout. The headphone cutout is big too so I was able to fit my headphone cable and aux cable easily.
The case is thick enough to reach the thickness of the camera so the phone feels all even which is great. You can put the phone down on its back without worry. On the front you might be able to see that the lip comes around enough to keep the screen from touching anything if it's set down face first. This comes at a price though, it lifts screen protectors off.
Overall the case feels great and looks great, I have their cases for all of my devices. It's very minimal in size so font expect amazing protection but for some who isn't looking for bulk this is perfect. It won't ever stick in your pocket or collect lint. It adds some grip and a cool logo on the back.
I'm still very limited writing this from bed so if anyone has questions or wants more info/pics let me know. I'll add pics of the clear one later.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Is that the black one or the smoke?