Related
OK ive done this before but im having major issues with the data speeds on my tilt 2. I did the tethering like i always do and installed the speed hack. enabled the hspda but my speeds on my new tilt 2 are very slow compared to my old one that i broke, i am lucky to get 500 down and 700 or 800 up and i used to get 1.5 or more down and 500 up so i dont know whats different from this newer one then my old one. Anyone having the same problem?
do you have the proxy enabled or disabled?
Several factors can be effecting your speed like location and time of day.
Proxy unknown
I have no idea if the proxy is enabled or disabled, as for the location and time of day, i use my phone at work for internet and ive never had a problem with speeds untill i got the warrenty replacement from att, a brand new tilt 2 the old one always gave a great connection and great speed at least 1.5 down.
WOOO HOO Fast again!!
OK i found out how to disable the proxy and disabled it and now my speeds are back up to about 1.5 down and 900 up. Thanks for the info. I am glad im a member of this site its really helped me out alot.
Ok now I am having this issue! Mine only happens on custom roms. I flash back to the original AT&T rom and speeds go back up. I have attempted almost all the radios and still no luck. I have disabled and re-enabled the proxy to no avail. I have also used the jh20001 speed cab to try and fix it. This occurs on all the custom roms I have tried from Energy (multiple builds) Cell(multiple builds) etc.. Speeds on AT&T's rom ar anywhere from 1100kbps-2100kbps. I try a different rom and speeds are always anywhere from 190kbps-580kbps no greater. HSDPA/HSUPA is enabled and also have tried it w/ j/HSDPA enabled and off. Any help would be greatly appreciated
can anyone help w/ this? i flip between the tilt2 and hd2 so i can get 3g here in virginia. i would like to get my fast data speeds back so i can watch my slingbox and listen to internet radio.
Anyone out there w/ any knowledge on this?
I have been feeling out my 4G connection for awhile now, and I am still having a strange experience with it. Speed tests always give good results, but actually using 4G for daily tasks is not working out well so far. Often times it loads pages and market or maps slower than with 4G...
I had been having this off and on all week, but I thought it was just my poor 4g connection at home. Anyway, now I'm writing from a mall with a very strong connection. Now I'm noticing when I load a page or open maps/market, it actually disconnects from 4G and loads with 3G for a second or two then switches back..
I've been using fresh, dc, and bugless ROMs, and always with the latest radio. I've had to apply the 4G patch a few times to get 4G working, but once it's up, it behaves the same...
Is it the ROM, my phone, or the nature of 4G in philadelphia?
I'd guess it's the nature of the 4g. It's still a new market. One thing, the bars on your phone only show the connection to the tower, not the connection to the internet. My 4g has been like that in places around Dallas, but closer to the heart of Dallas, I get more consistent connection. Someone correct me if I'm wrong, but that just seems to be the nature of technology here on the bleeding edge.
I might add, that for whatever reason, I cannot load my XDA bookmark to the evo 4g page on 4g at all, but it loads fine on 3g or wifi. I have yet to understand that one. Other pages seem to load ok though.
I've also noticed issues on xda, I think it's related to flash. I noticed if I load flash only sites on 4G it never loads or takes a stupid long time... If I cut to 3G it loads fine... On xda, it's the flash ads..
Having the phone process information and display it is much different then just doing a speed test. I'm in Philly also - but only use the 4G for tethering.
rutter9 said:
Having the phone process information and display it is much different then just doing a speed test. I'm in Philly also - but only use the 4G for tethering.
Click to expand...
Click to collapse
I agree completely, but the issue is that, on some pages (usually with flash) It loads and displays the information faster on 3G than on 4G... I'm not sure what would cause that. I'll try tethering and see if it's the same... I'll also try 4G when I'm in central philly...
I wonder if flash determines what quality to stream the content at? Like if you use sprint tv on 4g you will get higher quality video but it can be laggy trying to catch up to the stream. When on 3g the quality is a little less but doesn't skip around at all.
I'm having similar issues with my 4G connection. Some pages won't come up. The progress bar loads up to about 50% then either takes a really long time to bring up the page or not at all. All I get is a blank page. The xda forums are one of the sites I'm having problems with also. It loads up fine over 3G and WiFi. I'm currently running the OMJ rom, latest Radio, and the Fresh 4G fix. I'm not sure if the problem lies with my rooted Evo or the 4G network.
rutter9 said:
I wonder if flash determines what quality to stream the content at? Like if you use sprint tv on 4g you will get higher quality video but it can be laggy trying to catch up to the stream. When on 3g the quality is a little less but doesn't skip around at all.
Click to expand...
Click to collapse
That makes sense to me. Still, it seems strange that the network or phone one struggles to keep up like that. Ah well, like I said, the nature of things out here on the bleeding edge.
i have experienced similar 4g/3g flipflopping behavior and pisspoor wifi. its like the radio is very slow to get a connection as coming out of the pocket and then while in use it will go to 3g then say it's found a 4g and get on that and back to 3g. sometimes i'll see 4g w/ full strength but am unable to do any internet functions (web browser, pandora, meebo, appbrain all fail indicating no network). by putting it into Airplane mode...count to 3...take it out of airplane mode the radio reconnects and is able to pass data as expected.
i have done full cache, delvikcache, (and the other whatchamacallit) formatting between builds. and cleared the cache after updating the radio (even tho i shouldn't need to for Fresh .3)
i have not fussed with App2SD nor anything Flash related.
not sure if i live/work on the "edge" of coverage or if it's EVO (software or hardware) related. I"m leaning more to the coverage at this point. between testing it more as i move around town and next weeks froyo builds maybe the 4g gods will shine down upon me.
Increase WiMAX_Idle_Sleep(s) setting
I had the same issue and found these instructions which show how to increase WiMAX_Idle_Sleep(s) setting.
hit ##DATA# > Edit mode.
Put in your msl code
Chose WIMAX
Scroll down to Wimax_Idle_Sleep
Change the value from 10 to 300.
Click menu, commit changes and restart the phone.
See ' [GUIDE] Easy way to get MSL without calling Sprint or using CMDA Workshop' to get MSL Code, or just call Sprint and ask for it.
mgshultz said:
I had the same issue and found these instructions which show how to increase WiMAX_Idle_Sleep(s) setting.
hit ##DATA# > Edit mode.
Put in your msl code
Chose WIMAX
Scroll down to Wimax_Idle_Sleep
Change the value from 10 to 300.
Click menu, commit changes and restart the phone.
See ' [GUIDE] Easy way to get MSL without calling Sprint or using CMDA Workshop' to get MSL Code, or just call Sprint and ask for it.
Click to expand...
Click to collapse
I work in Philly and have the 3g 4g connection problems too. Your fix did not work for me. No matter what Rom or fix I've tried I can't keep a stable 4g connection without the stock Rom flashed. Sometimes WiFi tether will work on 4g with a custom Rom but anything else and I have all kinds of connection issues. I don't think its the network because 4g connection cards work just fine.
Edit: my main cause of concern is that simultaneous talk and data. I like to be able to talk and still follow sports scores while working. Sticking to stock for now.
I'm having trouble with my EVO staying in 3G coverage. My phone is fully rooted and running Froyo (The problems were the same with the Eclair build however), have the 2.05+ radio installed (however the problems were the same with the 1.39 radio as well) and I'm living in Michigan.
At any given time my phone will slip into 1X coverage and will seem to lock in there. When I first received the phone I felt like the phone quality was subpar compared to the Hero I had prior. I'm not sure if its been a firmware issue or network issue or simply a phone issue (starting to think the later), but hoping its a simple fix with something else.
About a week ago I was on a trip across Michigan which should have had 3g coverage the entire way (I was a passenger and trying to use wireless tethering to do some work along the trip). I would constantly go into 1X and would have to restart my phone to get back in 3G. Even at home I'll go into 1X and will have to reboot my phone to get it back to 3G.
I've tried Real Signal as well during these times and it also shows no 3G signal.
Anyways, anyone else experience this? Is it likely a bad radio or something else. I hate to have to return the phone and go through that process plus root again but I might have to at this point.
Thanks for any help that can be provided!!
Hmmm, whereabouts in MI? I am all over the south east and have never seen my phone drop out of 3G yet.
Have you tried wiping everything and trying stock rom w/OTA 1.47 just to make sure it isn't the ROM?
I am having the exact same problem. Using 2.0xxx radio and Fresh 0.5.3. I recently exchanged my phone and got a new one. The first phone did not do this
Try this:
When it shows you no 3G coverage, instead of restarting, go to-- SETTINGS> WIRELESS & NETWORKS> scroll down and look at "Mobile Network". When i get the 3g problem it says "Connection Failed". I think uncheck that box and re-check it and it connects back to 3g again (for a time, but then I have to do it again).
My MOBILE NETWORK settings are: Data Roaming = OFF, Always-on mobile data = ON, and CDM Roaming mode is set to: SPRINT only. Call guard = ON but i dunno what that means.
I dunno wtf is going on with this. Im in Houston and this issue is really pissing me off because i actually got a Novatek screen this time and don't want to risk taking the phone back and getting the Epson...
Anyone else experiencing this retarded issue?
Elegant: I'm in SE Michigan as well. I've tried several roms and have had issues with them all. I'm currently using a Froyo rom with similar issues as I've had with stock and other eclair roms.
As for checking/unchecking the box as you stated in Froyo I don't have that option available... I'm sure there's another way to get to it but I can't through settings. I think there was a #* code to get to where you are talking about but I'd have to look again.
It is a very annoying issue and like yourself I don't want to have to return my phone if there's a simple fix.
On a side note: How do I find out what panel I have? I've been considering the kernel that would get rid of the 30 fps cap but haven't yet pulled the trigger in part because I don't know which panel I have - and because I need to learn a little more about it before I go ahead with it.
http://forum.xda-developers.com/showthread.php?t=719763
Post 3 tells how to determine screen
Thanks for your help - got the kernel and now get around 40 FPS. Now if I can just figure out why the phone goes in and out of 3g on occasion. Its really not as big a deal when I'm at home but when I travel it is a pain.
well i returned my phone and got one with an Epson screen. im using Fresh 1.0.1 and it is even worse. i cant even use 3g data for more than 5 seconds before it disconnects. i've read some stuff about APN but dont know how to refresh/update them. i've updated PRL and Profile and nothing helps. how am i having this problem with 2 phones running 2 different ROMs? last rom was fresh 0.5.3 and now it is fresh 1.0.1...
anyone help with this APN issue? (i dont even know what APN stands for)
i actually am using the kernel for 55 FPS for Epson screens. would that be a factor either?
I'm and having the same issue with 3g.
Every thing worked fine with the first stock root of 1.32.651.1, PRI 1.40_003, PRL 60666.
With the second root of 1.47.651.1, PRI 1.34.651.1 now my 3g is unstable.
I don't know what FPS has to do with any of this, but I put radio radio-1.39.00.04.26 and it seems to improve a tiny bit, but I don't know how to update back to PRI 1.40_003.
Not happy
Also having problems in SE Michigan. Just started today after installation of Fresh 1.0.1 and the new radios. I also have a co-worker with and unrooted EVO and the latest OTA/Radio with the same problem.
I have a rooted EVO (DC 3.2.3). My wife has a stock EVO (fully updated).
Last night our phones started bouncing between roaming/sprint 3G, while we were sitting at home.
We started getting this error if we turned off Data Roam:
"Data Call Failure
Error Code 67: Registration failure. Your PCS Vision username and/or password may be incorrect. Please try again."
The error pops every time it tries to connect to Sprint's mobile network and fails.
We also live in Michigan. Perhaps they are doing provisioning?
Rebooting + update Profile/PRL seems to help, sometimes, but not permanently.
I am having the same issue with my 3g coverage.
When I go into my settings and turn mobile network on, it connects but then immediately says connection failed.
Does anyone have any suggestions as this is getting really annoying and frustrating.
Went to a Sprint store last night; apparently Michigan was having some significant network issues (the store reps said their phones kept getting disconnected as well), and that it was expected to be resolved by sometime today. After a reboot last night, I haven't had any more issues myself.
Hi, I was hoping someone here may be able to help me out with this problem. Last week I had a weird issue where my GPS signal stopped working, text messages and phone calls weren't coming into the phone. I've since been able to correct that issue with flashing to a clean Sense based ROM, and updating the profile and PRL, but now I can't seem to pickup 3G EVDO signal, only 2G 1xRTT..
My phone is(was) rooted and flashed with Calkulin's EViO 2 v1.77, most current radios. I thought maybe something got messed up, and since 1.8 was out, I flashed to that. Same issue, updated the radio from his package, same thing. Then I thought, ok, maybe something with this rom is messed up(unlikely, but I was grasping at straws at this point), so I flashed to a different rom, think it was sprint lovers.. same thing. Flashed to CM7, same. Unrooted and flashed back to stock, took it into Sprint, which they did a hard reset and told me since it shows the 3G icon in the top bar, it is on 3G and working fine. This is ofcourse bull**** since the Evo shows that 3G icon even if its on 1xRTT signal..Sprint tossing out wrong info, shocking I know. I've used Antennas and OpenSignal apps to show that it is indeed connecting to the 1xRTT signal. Downloading anything on the phone is ofcourse slow too, I've had google maps updating now for about 15 minutes, and it is 5.86MB.
Would anybody have some suggestions of what I can try to get the 3G radio working again?
Anybody have a suggestion of what I could try here? I've changed my PRL to the Verizon one, which gives the same results. Still having the same problem.
ya its calkulin's 1.8. the new extended mobile data menu hack has a messed up default that sets it to evdo only by default, messing up everything else. switching roms doenst help. go back to calk's 1.8 and type in the dialer ##3282# select view only and make sure mode of operation is on automatic.
Sounds like a silly request... but see if my train of thought makes any sense.
Background: I have an evo running on pageplus. I've followed the tut's, and had sporadic 1xRTT data working. I also tested running the phone using the verizon (pp) setup for mobile profiles, being simply one profile rather than the three required for it to connect to data.
What I've discovered (using the debug tool ##DEBUG#) is that using the three data profiles, the phone never authenticates for EVDO, and thus, stays at 1X, but the data does work. Using one profile, the phone does authenticate, but the connection never actually starts. I've read that it is because of the way the sprint provisioning works. Needless to say, at 1X battery life is horrendous.. as the phone is constantly trying to authenticate with EVDO cell bands. With EVDO and 1 profile, battery life is fantastic, but there's no data stream.
SO... I'm not sure if the final step of data startup (where the phone checks to see if it is using a sprint mobile data or verizon mobile data) is part of the ROM, or coded somehow into the radio firmware (or both).
I was thinking of trying to port a rom from, say, an incredible or Eris (any VZW phone).. to see if it'll actually start data with true 3G.
I figure XDA is the best place to ask.. these forums have been indispensable to me for all my phone nerding needs. =-)
Anyone have any thoughts on this?
Bueller.. anyone? anyone? Frye?
I'd really love to flash CM9 or an ICS ROM on my Page Plus carried Evo4G, I had it flashed on when I went through Sprint but, what precautions should Itake and is it even possible? Sorry for the bump, I searched and searched and couldn't find info about this since Feb so I'm finally asking