Develop Bugs

Best Evo Case for < $20 USD?

Hi Everyone,
So I just noticed a small scratch on the outer frame of my Evo's back camera frame today. :/ Unfortunately it's over the red paint job so it's quite obvious - and I'm now one day out of my 30 day return policy to boot, go figure. Oh well, another scratch amongst generations of cell phone ownership.
Hoping for a few suggestions of worthwhile cases available. I've seen quite a few options available on Ebay and various retailer websites (Seido, TPU, rubberized snap-ons, decals, etc. to name a few), but I'm hoping to get user input.
Ideally, I want something that won't add excess bulk to the phone, and will protect the back camera and maybe withstand a accidental drop or two without popping off.
I don't really have a need for anything that clips to a belt, but I would like something that supports the kick stand.
Thanks in advance!!

I've had the Best Buy Body Glove style case (bulky, grippy but the logos were raised and so wasn't grippy on a surface, cheap feeling), Sprint silicone case (loose fitting, grippy, covers a lot of the front of the phone, picks up dirt like crazy because of the grippy), and the new TPU case (looks grippy but is smooth, fits very tight on the phone, bottom port cutouts not as generous as the Sprint silicone case). For $6 shipped after the coupon available in the thread the TPU case in my opinion is unbeatable. I posted a ton of pics of the TPU case, they're on page 2 of the thread linked above also.

phobos512 said:
I've had the Best Buy Body Glove style case (bulky, grippy but the logos were raised and so wasn't grippy on a surface, cheap feeling), Sprint silicone case (loose fitting, grippy, covers a lot of the front of the phone, picks up dirt like crazy because of the grippy), and the new TPU case (looks grippy but is smooth, fits very tight on the phone, bottom port cutouts not as generous as the Sprint silicone case). For $6 shipped after the coupon available in the thread the TPU case in my opinion is unbeatable. I posted a ton of pics of the TPU case, they're on page 2 of the thread linked above also.
Click to expand...
Click to collapse
Thanks I'll check this out, sounds like it may be exactly what I'm looking for.
Any idea what the turnaround time is on shipping?

I've bought three of these so far, two for me in red and black, and a black one for a friend. They fit tight and have a nice and durable finish. Here is a pic of my red one that I took while installing a mounting disc for a car mount.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

oblivion0 said:
Thanks I'll check this out, sounds like it may be exactly what I'm looking for.
Any idea what the turnaround time is on shipping?
Click to expand...
Click to collapse
I ordered my TPU case on tuesday and got it on thursday with the standard first class shipping.

Vinny75 said:
I ordered my TPU case on tuesday and got it on thursday with the standard first class shipping.
Click to expand...
Click to collapse
Ordered mine today (Saturday afternoon), hoping for similar fast shipping.

The Body Glove case is absolute junk. Within the first couple of days, the thin piece of plastic by the volume buttons broke off, and two minor drops resulted in pieces of the case breaking off, and both times the case came completely off the phone.
Meritline sells Skytouch cases for $6.99 and they're great. I've had the transparent one for a couple weeks now and am really impressed with the quality, especially for the price. It fits snugs, is easy to put on and take off and is thick enough to be plenty protective but thin enough not to add much bulk. I've dropped it twice since I added the transparent case and it has not cracked, or popped off.
w w w.meritline.com/skytouch-transparent-clear-snap-cover-htc-supersonic-evo-4g---p-45856.aspx
w w w.meritline.com/newsearch.aspx?category=Other+Cases&SearchTerm=skytouch+evo+4g

Guys, just to follow up on this thread...I've ordered the TPU case and will post a few pics once I receive it.
After a little digging, I also found these hybrid flex skins via blog Good and Evo that seem like they could be viable contenders.

EVO Hard Cover Case
I got these from eBay, and these are very good. I like the feel and the look. I also got the Body Glove black case from Sprint Store but that was making the phone bulky.
New White Hard Cover Case For Sprint HTC EVO 4G by luxuarycellwireless
I also got these from eBay and received them today. These look like very good case.
Rubberrized Hard Case Cover For HTC Sprint EVO 4G Black by ibuuuy
PS: Giving the seller details as I'm not able to post any links.

i use case mate's barely there case.
http://www.case-mate.com/HTC-EVO-4G-Cases/Case-Mate-HTC-EVO-4G-Barely-There-Cases.asp
it's a snap on case that doesn't protect the front. it protects the back and the camera. its very slim and flexible.

My Seidio Innocase Active Case Limited Edition just shipped from Amazon. It was slightly above your budget at $24.95, but it looks amazing. I'll let ya know when I get it....
http://www.amazon.com/gp/product/B003TSDJEE/ref=oss_product
Plus there's a bunch of colors for those who like that.....

I ordered the blue one and should get it Wednesday

oblivion0 said:
Guys, just to follow up on this thread...I've ordered the TPU case and will post a few pics once I receive it.
After a little digging, I also found these hybrid flex skins via blog Good and Evo that seem like they could be viable contenders.
Click to expand...
Click to collapse
wow! nice find! a little pricey for TPU, but they have some great color options!

oblivion0 said:
Guys, just to follow up on this thread...I've ordered the TPU case and will post a few pics once I receive it.
After a little digging, I also found these hybrid flex skins via blog Good and Evo that seem like they could be viable contenders.
Click to expand...
Click to collapse
You will be happy with the TPU case, the only gripe I have is that his tolerances were so tight that the damned thing is a bit hard to get off of the phone.
If there was anything I had to complain about it would be not leaving enough room around the headphone and charging spaces to plug a full sized cord in.
Other than that, perfect cases, even if you do have to make a bandaid for the power and volume buttons.

if you like rubber cases, I love my $9.95 Amzer Silicone case from Amazon. It's fallen a few times several feet and no damage whatsoever, and it's still pocketable, and makes it a lot easier to grip. I prefer them to hard cases for this reason, makes things much more 1 handable

phobos512 said:
. . .new TPU case[/url] (looks grippy but is smooth, fits very tight on the phone, bottom port cutouts not as generous as the Sprint silicone case). For $6 shipped after the coupon available in the thread the TPU case in my opinion is unbeatable.
Click to expand...
Click to collapse
All they have now is matte black, I think. I found some TPU cases on handhelditems, they have the cases in clear, black, pink and a few other obnoxious colors. Cost about $8.00 shipped with the coupon code "30htcoff".

Thin case for atrix?

im looking for a thin atrix case.. any suggestions

fRenZy-_- said:
im looking for a thin atrix case.. any suggestions
Click to expand...
Click to collapse
I want a simlar thing, I think I'm going to just wait for the OEM rugged battery door; looks sweet and will still work with the docks!
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=27649

I picked up the bodyglove that ATT sells, love it so far feels good in the hand and deosn't add bulk to the phone. Bought the otterbox but that thing is huge don't like at all sucks to cause the store I got it from doesn't do returns so currently selling it on ebay.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is also a thread where they are talking about the three that can be found at ATT website besides the otterbox
http://forum.xda-developers.com/showthread.php?t=958367

I bought this one:
http://www.amazon.com/gp/product/B004O95J0Y
I have used this material in several phones , it kind of adheres to surfaces
I'll get it next week and report back

I got the Body Glove and think the thickness is perfect.

EJayMz said:
I got the Body Glove and think the thickness is perfect.
Click to expand...
Click to collapse
I got this one as well. Had it for my Captivate too. Works great and doesn't stick to your pocket lining.

I think the Incipio Feather case should be very thin. Available from them directly or I'm hearing in Radio Shack too.
We have that same case on the wife's iP4 and it adds almost no bulk to the phone. It probably doesn't provide much shock resistance like the Otterbox cases, but prevents scratches and makes it easier to grip.

I purchased a smoke TPU case off of EBay; should be here today or tomorrow. I've used a TPU case on my EVO since about 2 weeks after I had it and I love the feel and the slimness of the case, and the fact that it provides a bumper of sorts to keep the screen from lying on surfaces (unlike the Incipio case).
The one I purchased is item 290530353216 (chose that one due to the seller's location being near to me, only reason really).

If you have prime with Amazon, the case 2 posts above is only $2 with 2 day shipping
http://www.amazon.com/EMPIRE-Black-...LKO4/ref=sr_1_2?ie=UTF8&qid=1298653527&sr=8-2

Can you still dock the phone with the body glove?

The body glove case works with the car dock perfectly. It's a great case. Not to rubbery and not to slippery, just right.

any TPU case is the way to go. rubbery and protective, but not too rubbery to stick in your pocket and not come out.

shamdawg said:
The body glove case works with the car dock perfectly. It's a great case. Not to rubbery and not to slippery, just right.
Click to expand...
Click to collapse
What about with the standard dock or the HD Multimedia dock?

pvillasuso said:
I bought this one:
http://www.amazon.com/gp/product/B004O95J0Y
I have used this material in several phones , it kind of adheres to surfaces
I'll get it next week and report back
Click to expand...
Click to collapse
zizo79 said:
If you have prime with Amazon, the case 2 posts above is only $2 with 2 day shipping
http://www.amazon.com/EMPIRE-Black-...LKO4/ref=sr_1_2?ie=UTF8&qid=1298653527&sr=8-2
Click to expand...
Click to collapse
are they easy to take off and put on? is the material bendable?

I purchased the Speck case at the Att store. Very good protection nice looks without the added bulk of an otterbox case.
Sent from my MB860 using XDA App

Cross posting this from the Incipio thread:
Just scored the Incipio Feather case (in black) - we're already using one on our iPhone 4, and I really like it. I wanted something to cover the back/side, provide better grip, and maybe offer a touch of drop resistance, but that's secondary.
The material is super thin, like 0.5mm or thinner, it basically adds no bulk to the phone. It does come with a screen protector, but I doubt I'll use it, I'm pretty gentle with my phones and they're usually just in my pocket (and I keep my rusty nails and broken glass in a +different+ pocket). Plus the design isn't edge-to-edut
The fit is tight, really clean, the ports/buttons are easily accessible. It uses that popular "soft touch" type material, which has an almost felt like surface. We have a Speck case that's like this. The nice thing vs. silicone is it's grippy, but it doesn't attract dust ~n~ gunk and wipes clean. It also isn't so sticky that it's hard to get out of a pocket!

Aaronneyer said:
What about with the standard dock or the HD Multimedia dock?
Click to expand...
Click to collapse
The Body Glove does not work with these docks. It will fit (extremely tight), but the thickness of the sides of the case near the HDMI and microUSB ports keeps the phone from sitting all the way down on the dock. The end result is that it doesn't trigger or power the device.
I ended up returning my dock because of this.

+1 for the Incipio feather. Its the right mix of style and protection in the this case range. I dropped my phone about two feet this morning, and the feather was more than adequate to protect it.

shawnbuck said:
+1 for the Incipio feather. Its the right mix of style and protection in the this case range. I dropped my phone about two feet this morning, and the feather was more than adequate to protect it.
Click to expand...
Click to collapse
Out of curiosity, did you try your screen protector?

[DT] said:
Cross posting this from the Incipio thread:
Just scored the Incipio Feather case (in black) - we're already using one on our iPhone 4, and I really like it. I wanted something to cover the back/side, provide better grip, and maybe offer a touch of drop resistance, but that's secondary.
The material is super thin, like 0.5mm or thinner, it basically adds no bulk to the phone. It does come with a screen protector, but I doubt I'll use it, I'm pretty gentle with my phones and they're usually just in my pocket (and I keep my rusty nails and broken glass in a +different+ pocket). Plus the design isn't edge-to-edut
The fit is tight, really clean, the ports/buttons are easily accessible. It uses that popular "soft touch" type material, which has an almost felt like surface. We have a Speck case that's like this. The nice thing vs. silicone is it's grippy, but it doesn't attract dust ~n~ gunk and wipes clean. It also isn't so sticky that it's hard to get out of a pocket!
Click to expand...
Click to collapse
Off topic: Which lock screen app are you using? Also, what's the app at the bottom of the screen? Thanks.

Ultra Slim Covers

These are covered in the "Master List" but that doesn't seem like the appropriate forum to discuss specific items on the list in detail...
Samsung Galaxy S® III Ultra Slim Cover - 2 Pack
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"This 2-pack comes with two different colors and textures of Samsung Galaxy S III Ultra Slim Covers.The Galaxy S™ III Ultra Slim Cover provides additional protection for your handset against scratches on the back of the device. If you typically don't buy cases for mobile phones, this is the option for you. The case is ultra slim, giving you the feeling that it's not even there - aside from the texturized grip it provides, keeping the phone from sliding off surfaces or falling out of your pocket. Allows unimpeded access to ports and buttons, assuring your Galaxy S III is fully functional."
Click to expand...
Click to collapse
Does anyone have one of these? What are your thoughts? Exactly how thin are these things?
There's three main reasons that I never use a case:
There's only so much room in my pocket as it is
Decreases sexiness
I use mounts that are designed specifically for my phone. A case would get in the way of that.
If I am to believe their marketing... "The case is ultra slim, giving you the feeling that it's not even there"... then it would seem like at least #1 and #2 on my list would not be as much of a concern. #3 would probably still be an issue, but who knows. I plan on getting a ProClip holder for my SGSIII, and I've never had one before so I don't know exactly how snug it will be. If this cover really is as thin as they make it sound, maybe it'll even fit in that too.
Thoughts?
P.S. Show of hands... who saw "ultra slim, giving you the feeling that it's not even there" and immediately wanted to make a sexual joke?

I've also been looking for the slimmest case possible and been eyeing these. Any input would be appreciated!
Sent from my SGH-T999 using xda premium

+1 also interested in these but have no idea how they translate as noone has reviewed them or has them that I've seen.

I'm not as worried about scratches as I am about the thing sliding out of my pocket or very short falls.
Although I'm sure this thing would probably increase friction enough to lower my concerns about pocket escape I'm not sure that it looks like it provides any additional padding vs my kitchen floor.

My main doubt with these is whether the case is so thin it breaks or becomes stretched..

Will have to check best buy to see if they are going to carry this like the flip cover.
And I will be the first to admit that I thought of a sexual joke too.

Well I went to buy them and they are on back order... guess they are more popular then we thought.
Sent from my GT-P7510 using xda premium

I just order one of these
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150841451141#ht_3065wt_1185

ranchosteve said:
I just order one of these
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150841451141#ht_3065wt_1185
Click to expand...
Click to collapse
Doesn't look like that item really offers anything in terms of protection, aesthetics, or ease-of-holding. The Samsung ones probably don't offer much protection either, but the texture will at least help to grip the phone. Looks a little nicer too.

I just order these Rearth Alpine White Ringke SLIM LITE Premium Coated Hard Case for my Marble White GS3
http://www.amazon.com/gp/product/B008BUTJ3A/ref=oh_details_o00_s00_i01
and the second choice with stand!
http://www.amazon.com/Amzer-AMZ9409...UTF8&coliid=IJ1GXDAZ2FKEL&colid=2GNYUQI0MTNPL

ranchosteve said:
I just order one of these
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150841451141#ht_3065wt_1185
Click to expand...
Click to collapse
Just ordered that few days ago. lol
0.3mm thin! think about it! Though it doesnt offer much protection, im only planning on using it around the house and my friends houses.

I typically get a tough case like a Silicryllic or Otterbox, and a lighter/thinner hard case to protect from scratches when being put down, keep cameras protected, and a slight drop.
For my thin case I bought the Rock Quicksand in grey for my Pebble Blue GS3, and am VERY happy with it. It adds a lip around the screen so it can be set face down, controls are easy to get to, and it's different from everything out there. It's great to just have around the house, and set on a desk or counter and not worry about scratching the back.
http://www.amazon.com/gp/product/B0089E44OM/ref=oh_details_o00_s00_i00
Also considering the Diztronic blue TPU when it's released, and then either the Silicryllic or an otterbox maybe.

zaisaroni said:
I typically get a tough case like a Silicryllic or Otterbox, and a lighter/thinner hard case to protect from scratches when being put down, keep cameras protected, and a slight drop.
For my thin case I bought the Rock Quicksand in grey for my Pebble Blue GS3, and am VERY happy with it. It adds a lip around the screen so it can be set face down, controls are easy to get to, and it's different from everything out there. It's great to just have around the house, and set on a desk or counter and not worry about scratching the back.
http://www.amazon.com/gp/product/B0089E44OM/ref=oh_details_o00_s00_i00
Also considering the Diztronic blue TPU when it's released, and then either the Silicryllic or an otterbox maybe.
Click to expand...
Click to collapse
+1 on the rock case. It's really nice.
Sent from my Galaxy S3

Slim Cases
I'm (DBA Cases) am going to release one in 2-3 weeks.
That one for a few bucks is going to be garbage. When you are talking thin cases you have to use the right materials - no way they are.
Mine have a special blend of polycarbonate to take falls and scratches, a great grip and better design.
Of course they will be more than a few bucks but I'll have them on EBAY probably.

Let me know I'd love to test and write a full review for ya I'll cover shipping
Sent from my SAMSUNG-SGH-I747 using xda premium

Saw a review for it on youtube. Looks really sleek but the deal breaker for me was that it doesn't have a lip in front that lets you leave it face down without scratching it up.
Here's the link though:
http://youtu.be/H0QI_L2WKpQ
I went with the Incipio NGP in translucent gray and it looks really slick on my blue s3

hey this one is also a genuine samsung case and it has the lip:
http://youtu.be/ZrhcgrMnw1o
http://www.samsung.com/us/mobile/cell-phones-accessories/EFC-1G6WBEGSTA

does anyone have a pic of the genuine samsung clear one on the pebble blue phone? i can't find one online anywhere

sw07tc said:
I just order these Rearth Alpine White Ringke SLIM LITE Premium Coated Hard Case for my Marble White GS3
http://www.amazon.com/gp/product/B008BUTJ3A/ref=oh_details_o00_s00_i01
and the second choice with stand!
http://www.amazon.com/Amzer-AMZ9409...UTF8&coliid=IJ1GXDAZ2FKEL&colid=2GNYUQI0MTNPL
Click to expand...
Click to collapse
I've got the Rearth Alpine White Ringke earlier in the week. It's super thin. I've got a Speck Candy shell arriving today for comparison...

I owned one of the 0.3mm cases from ebay for my s2 and I'll give you my opinion:
1. They protect the phone pretty well. Even through some minor falls the case still held on and didn't crack
2. The case scratches pretty easy. If you get the clear one its not as noticeable, but it was very noticeable when I owned the black one.
3. I kept a screen protector on the phone as the lip on the screen side is minimal and I was still scared of setting it down on the screen side otherwise.
4. Used the case for ~6mos(2 mos black version, 4 mos clear version) with no major issues. It is still on the phone as we speak.
5. Super cheap(~$3) and did exactly what it was supposed to do(prevent scratches on the phone and case
I already have one on order for my S3
-extremepizza

Incipio Faxion... anyone own this case?

This is a new case offered by Incipio I already ordered mine I was just wondering if anyone has this case because I've searched the forums and found not anyone has mentioned it. I like tpu cases but I like the feel of polycarbonate. This case is probably similar to the Spigen NGP neo hybrid, which is what I was waiting for but I can't wait any longer. So let me know what you guys think about it if you own it.
http://www.incipio.com/Samsung-Gala...-Soft-Shell-Case-with-Polycarbonate-Frame.asp

Coupon code Sum2012 for 20% off. 27.99 free shipping.

I really like this one...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.incipio.com/Samsung-Gala...-SHINE-Hard-Shell-Case-with-Silicone-Core.asp

1SiK1500 said:
I really like this one...
http://www.incipio.com/Samsung-Gala...-SHINE-Hard-Shell-Case-with-Silicone-Core.asp
Click to expand...
Click to collapse
I just ordered the DualPro Shine last night!

mav3rick478 said:
I just ordered the DualPro Shine last night!
Click to expand...
Click to collapse
Please post pictures when it comes in! what color combo did you get?

How do these stack up against the Trident Aegis or Otterbox Commuter cases? This case life sits right between those two in terms of pricing.
Sent from my SPH-L710 using xda premium

Just got my s3 today and got the incipio case from radio shack, just so it wasn't naked. The case is alright, light and thin, but the screen saver blows.
Sent from my SAMSUNG-SGH-I747 using xda premium

ughh I was gonna post this case, but I thought people already know about it! I think it's super nice. wanna see some reviews! :d Thanks for posting it.

ericpd said:
How do these stack up against the Trident Aegis or Otterbox Commuter cases? This case life sits right between those two in terms of pricing.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I had a commuter for about 24hrs... Now on a silicryllic and couldn't be happier. I have no kids, no real damage to any device but an iPhone that fell completely face flat onto hardwood @ 4ft and shattered into 100 pieces in an incase slider.
Otterbox Commuter
Pros
- Tough as hell! It seems overkill for my everyday use. People with defenders must play baseball with their devices.
- Dust covers will keep things cleaner.
- Flash, Camera, speaker are seperate cutouts and deep.
Cons
- Added way too much thickness IMO. I don't remember my iPhone 3GS in a case being this thick...
- Plastic is SLIPPERY. You need such a tough case because you'll be dropping it more than naked.
- Plastic came down the sides further than I would like, so you're holding onto it's slippery face, and not the rubber near the screen face.
- Buttons are terrible to press, way to hard.
- Damn near impossible to remove. I like to remove mine for cleaning once a week or two, and switch out with a thin hard shell depending on my day.
Incipio Silicryllic (Should note I've had this on two other phones now, but been happy with it's durability on them)
Pros
- Slips into pocket very easy.
- Isn't too thick
- Adds side grip over stock
- Looks much better, frankly more grown-up too.
- Slightly easier to hit the home button
- Around $10 cheaper than Commuter
Cons
- Probably not as protective as the Commuter on big drops(Based on a GNex and Titan, It's still very good, better than a TPU, hard shell, etc)
- Flash, Camera, Speaker opening is one large hole, easier to get the lens if it's lands on a protrusion.
- no port coverings
- Silicone can catch dust, but a quick wipe takes care of anything visible with it's clean lines.

This thread was about the Incipio Faxion guys not other incipio cases
Got my faxion case.. And I like it... It is thinner and lighter than the sycrillic and has good drop protection. It is in between a two piece case like sycrillic and a tpu case.. The polycarbonate back does scratch up fairly easy. I have the blue and Grey case. The white might not show up as much. I will post pics if I get the time.

Oh dang I never noticed this was a TPU/Polycarb case . How sturdy is the TPU core around the top and the bottom of the phone? I recently got the Silicryllic case and I don't like how loose the top and especially the bottom where the USB mini port is. It feels like that area might tear sooner or later.

mossolb said:
Oh dang I never noticed this was a TPU/Polycarb case . How sturdy is the TPU core around the top and the bottom of the phone? I recently got the Silicryllic case and I don't like how loose the top and especially the bottom where the USB mini port is. It feels like that area might tear sooner or later.
Click to expand...
Click to collapse
While silicone does tend to be a little more flexible, I've never had even a pure silicone case tear on me yet, and I've had versions for years on a phone and a 7" tablet (switched to a folio for the tablet, though - better screen protection)
IMO, I'd always prefer silicone over TPU in a hybrid case, since it both provides better grip (if exposed by the polycarb shell) and better shock absorption. I don't think I'd ever want a pure silicone case for a phone ever again, though, since while the extreme grippiness is great, it's a lint magnet and a pain to pull out of your pocket sometimes. Also, it's too easy for toddlers to rip it off.

zmore said:
While silicone does tend to be a little more flexible, I've never had even a pure silicone case tear on me yet, and I've had versions for years on a phone and a 7" tablet (switched to a folio for the tablet, though - better screen protection)
IMO, I'd always prefer silicone over TPU in a hybrid case, since it both provides better grip (if exposed by the polycarb shell) and better shock absorption. I don't think I'd ever want a pure silicone case for a phone ever again, though, since while the extreme grippiness is great, it's a lint magnet and a pain to pull out of your pocket sometimes. Also, it's too easy for toddlers to rip it off.
Click to expand...
Click to collapse
A friend had a simple silicone case on his phone and had those exact problems as you mentioned with it being a lint magnet and how troublesome to put it in and pull it out of the pocket.
My family recently upgraded their phones to the Epic 4G Touch and I ordered some simple TPU cases for them and I found even though the grip is less compared to the silicone hybrid, just adding some bulk helps with gripping the phones. I like how the TPU cases are just a tighter fit around the phones.
We all have come from phones that were maybe 4+ years old so they were thicker and we didn't have to worry much about damaging the phone from a drop. I myself came from the HTC Mogul so it was a huge change in the thickness of the phone.

What about the body glove drop suit? Anyone seen this, or have any opinions on it.
Sent from my Nexus S 4G using xda premium

great comparison! thanks for sharing!

need a bombproof case for SGS3

i need a bombproof case for my SGS3 i have read alot of the case reviews on here and i am just over whelmed by the case options and was wondering what the community here can give me some advice on picking a case any help would be great

The Otterbox Defender is probably the most protective case on the market.
I just ordered a Urban Armor Gear case off eBay. There was one for $29.95 or best offer so I threw in $22 and it accepted! Free shipping too. Great deal.
I'm currently using the free ZooGue case ($4 shipping) and it's been pretty good for a TPU case. I just wanted something a bit more protective.

Bobby_C said:
The Otterbox Defender is probably the most protective case on the market.
I just ordered a Urban Armor Gear case off eBay. There was one for $29.95 or best offer so I threw in $22 and it accepted! Free shipping too. Great deal.
I'm currently using the free ZooGue case ($4 shipping) and it's been pretty good for a TPU case. I just wanted something a bit more protective.
Click to expand...
Click to collapse
LifeProof has one coming out but who knows when it'll be released.
Griffin Technologies has said a Survivor series case is in the works but yet again no solid date.
Vietnam travel-Halong bay cruise-Halong Paloma cruise

Check out the Puregear Dualtek case
Sent from my SCH-I535

jeriel05 said:
Check out the Puregear Dualtek case
Sent from my SCH-I535
Click to expand...
Click to collapse
I second this. Not as bulky as the Defender but looks/feels very protective of the phone.

Trident Kraken,Otterbox Defender, a couple different Seidio cases including their new one Obex, puregear dualtek.
LifeProof has one coming out but who knows when it'll be released.
Griffin Technologies has said a Survivor series case is in the works but yet again no solid date.
Sent from Pluto.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

does anyone have experiance with the SAMSUNG GALAXY S III BALLISTIC SHELL GEL (SG) SERIES CASE

I have the Ballistic SG MAX, and it is by far the most protective case I've ever used. The screen guard is replaceable too. Also, the belt clip is awesome.
Sent from my SPH-L710 using xda premium

Otterbox defender + ifeel glass
I use the otterbox commuter and the ifeel screen protector.
It is thinner than the defender and its easier to remove the case during an over heat plus it leaves the screen protector in place.
Edit: just bad speling
Phone: SAMSUNG-SGH-I747
ICS 4.04
KT747-Kernel-TW-ICS-10-28-2012
Areil.2_JKayFramework.03
l747UCLH9
Ariel 2.10
cm 6.0.1.4 touch

I've used Otterbox Defender since I bought the SGS3. Picked up the Seidio OBEX case today. I have complete confidence in the otterbox but really liked the idea of waterproof case. Still not sure about the OBEX just yet but seems like a very good solid well built case. Performed the waterproof test and it's lived up to the claims.

jeriel05 said:
Check out the Puregear Dualtek case
Sent from my SCH-I535
Click to expand...
Click to collapse
That looks as tough as UAG's so i'd go for a UAG (better looking to me). Pure is probably cheaper though.
But he wants something tougher than that one i think, so it's not the same grade of cases. Look for otterbox defender or Trident Kraken. Kraken has lots of videos official and third party on youtube vouching for it's toughness.
I'm using a UAG at the moment and although extremly satisfied, i may still get a kraken just because how tough they seem for heavier duty.
Check out the 15 pound anchor one, this kind of impressed me. They also have a splash test (they throw a bucket of water on it), throw a phone off the roof of a building crashing hard on solid concrete, kick one around, etc. Reckon anything short of that nuclear explosion and they've tested it. Phone survives everytime, of course.
http://www.youtube.com/watch?v=VbeaG1ySFnI

My favorite hands down (and tested)
http://forum.xda-developers.com/showpost.php?p=33992870&postcount=16

kaynpayn said:
That looks as tough as UAG's so i'd go for a UAG (better looking to me). Pure is probably cheaper though.
But he wants something tougher than that one i think, so it's not the same grade of cases. Look for otterbox defender or Trident Kraken. Kraken has lots of videos official and third party on youtube vouching for it's toughness.
I'm using a UAG at the moment and although extremly satisfied, i may still get a kraken just because how tough they seem for heavier duty.
Check out the 15 pound anchor one, this kind of impressed me. They also have a splash test (they throw a bucket of water on it), throw a phone off the roof of a building crashing hard on solid concrete, kick one around, etc. Reckon anything short of that nuclear explosion and they've tested it. Phone survives everytime, of course.
http://www.youtube.com/watch?v=VbeaG1ySFnI
Click to expand...
Click to collapse
The Puregear Dualtek is waaay tougher than a UAG case. I have both. My fingers hurt after removing the Dualtek case.

kaynpayn said:
That looks as tough as UAG's so i'd go for a UAG (better looking to me). Pure is probably cheaper though.
But he wants something tougher than that one i think, so it's not the same grade of cases. Look for otterbox defender or Trident Kraken. Kraken has lots of videos official and third party on youtube vouching for it's toughness.
I'm using a UAG at the moment and although extremly satisfied, i may still get a kraken just because how tough they seem for heavier duty.
Check out the 15 pound anchor one, this kind of impressed me. They also have a splash test (they throw a bucket of water on it), throw a phone off the roof of a building crashing hard on solid concrete, kick one around, etc. Reckon anything short of that nuclear explosion and they've tested it. Phone survives everytime, of course.
http://www.youtube.com/watch?v=VbeaG1ySFnI
Click to expand...
Click to collapse
I can't judge the UAG because I don't own one, but I do own a otterbox defender and the Dualtek. I can confidently say this this case protects just as well as the defender just in a slimmer package. I have purposely dropped the phone on asphalt and concrete to see how it holds up and the phone and the case are fine. There's a video on YouTube of a guy throwing the dualtek from a 20 foot roof on to solid concrete and the phone just bounces around a few times and that's it. This is a very solid case and though it may not look it, it is very rugged.
Sent from my SCH-I535

I have the ballistic. Feels pretty protective

I have the otter box defender love the protection it gives. Have dropped many times and held up very well it does add bulk but keeps my phone safe and protected

Been using the Ballistic Max with it's screen protector for about three weeks. One fall from belt to floor without issue. The real test is falling face down on gravel, the Gorilla glass by itself will not take that as I found out. Not sure what screen protector will take a belt to gravel hit?