Develop Bugs

Galaxy S3 Won't Power On

Hi , I'm having problems with my Galaxy T999. I have rooted and have not yet installed any kernels/roms. The only thing i did was installed a couple apps from the play store . and wanted to check out the CWM recovery menu and was going to try to installed "hyperX camera mod". First thing i did was shut off the phone . Then pressed on the Volume up+Home+Power button . After doing that my phone didn't turn on or anything , no vibration or anything . I hooked it on with my computer and press the power button and it was able to connect and then disconnected. I am at lost now and can't seem to find any answer . Have looked every where not sure what to do now. Any solution will be much appreciated .
***
It seems to disconnect due to no driver found for QHUSUB_DLOAD .
Without any solutions I'll probably gonna get my phone replace . T_T

Does your phone disconnect immediately, or does it stay connected for a brief amount of time? If it stays connected briefly, try using adb during this period to boot into recovery. The command is "adb reboot recovery" (without the quotes).

kengvang25 said:
Hi , I'm having problems with my Galaxy T999. I have rooted and have not yet installed any kernels/roms. The only thing i did was installed a couple apps from the play store . and wanted to check out the CWM recovery menu and was going to try to installed "hyperX camera mod". First thing i did was shut off the phone . Then pressed on the Volume up+Home+Power button . After doing that my phone didn't turn on or anything , no vibration or anything . I hooked it on with my computer and press the power button and it was able to connect and then disconnected. I am at lost now and can't seem to find any answer . Have looked every where not sure what to do now. Any solution will be much appreciated .
***
It seems to disconnect due to no driver found for QHUSUB_DLOAD .
Without any solutions I'll probably gonna get my phone replace . T_T
Click to expand...
Click to collapse
Try to remove your battery then plug in charger. See if you can turn on. If you can turn it on, leave it 30 minutes. Then put in the battery.

By the looks of the result the computer gives you when you plug it in, seems it is hard bricked! Are you sure you didn't flash anything from the I9300 section like a rom?
Sent from my SGH-T999

The hyper x camera mod isnt entirely for our phone. I've read that it's flashable to our phone though, so I'm not sure what's going on here. Maybe the OP needs to link where he got the mod. Ih and stay away from the intl version all together.
Sent from my SGH-T999 using xda premium

mt3g said:
The hyper x camera mod isnt entirely for our phone. I've read that it's flashable to our phone though, so I'm not sure what's going on here. Maybe the OP needs to link where he got the mod. Ih and stay away from the intl version all together.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yup its a paperweight. The Intl version has the system partition in a different place. So you borked an important one.

Only thing that's throwing me off is that the OP suggests he didn't actually get around to flashing the mod.
Sent from my SGH-T999 using xda app-developers app

kengvang25 said:
It seems to disconnect due to no driver found for QHUSUB_DLOAD .
Click to expand...
Click to collapse
That's a good sign! Looks like you're able to enter Download mode. Download Odin and flash a stock ROM.

vinvam said:
That's a good sign! Looks like you're able to enter Download mode. Download Odin and flash a stock ROM.
Click to expand...
Click to collapse
No that's a sign of hard bricked. Check other threads asking for help. They all have that displaying after they connect it to a pc
Sent from my SGH-T999

chrisram88 said:
No that's a sign of hard bricked. Check other threads asking for help. They all have that displaying after they connect it to a pc
Sent from my SGH-T999
Click to expand...
Click to collapse
Oops, never mind! chrisram88 is correct. :good:

I pretty much got the same problem except with an i9300. Is there any way to fix a hard brick or does it need a new motherboard??
vinvam said:
Oops, never mind! chrisram88 is correct. :good:
Click to expand...
Click to collapse

Vadim89 said:
I pretty much got the same problem except with an i9300. Is there any way to fix a hard brick or does it need a new motherboard??
Click to expand...
Click to collapse
Jtag fix... Costs you around 60! http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Sent from my SGH-T999

Vadim89 said:
I pretty much got the same problem except with an i9300. Is there any way to fix a hard brick or does it need a new motherboard??
Click to expand...
Click to collapse
I just sent my bricked S2 in to http://www.cell-dr.com/
I talked to Randy over there and he was very helpful. Shoot him an email.

Thanks guys for all the great response . I'm not really good with tech stuff so I just got it replace with a new one instead .
And this is the tut that i followed how to root my Galaxy S3 T-999 :
galaxy s 3root .com

What if I install a ROM for I9300 section? is there a solution?

Yup send it in for a jtag repair like linked a few posts up.
Sent from my SGH-T999L using xda premium

SGS3 T999v wont start up.
My sgs3 t999v would turn off by itself every other time I hit the lock button.
like I would be txting and then if I hit the lock button it would turn off.
So I though a factory reset would fix the problem. (volume up + home).
after the reset it still kept turning off randomly.
and now I cant even get it to the normal interface. or get in to the manual reset mode.
Device was previously jail broken, however was returned back to stock and was working fine for 3 months.
I had my otterbox on for every fall my phone had, so I dont think it would be a hardware issue.
the phone was running 4.1.1 I believe.
stock rom.
help please! :C

ekimera said:
My sgs3 t999v would turn off by itself every other time I hit the lock button.
like I would be txting and then if I hit the lock button it would turn off.
So I though a factory reset would fix the problem. (volume up + home).
after the reset it still kept turning off randomly.
and now I cant even get it to the normal interface. or get in to the manual reset mode.
Device was previously jail broken, however was returned back to stock and was working fine for 3 months.
I had my otterbox on for every fall my phone had, so I dont think it would be a hardware issue.
the phone was running 4.1.1 I believe.
stock rom.
help please! :C
Click to expand...
Click to collapse
Can you get download mode? (Volume down, HOME and power)
Even though you have a case on it, it sounds like it was probably damaged by one of the falls. Most cases as far as I'm aware mostly protect the display. The shock from impact can still damage internal components, even with a case built with this in mind.
Sent from my SGH-T999L using xda premium

DocHoliday77 said:
Can you get download mode? (Volume down, HOME and power)
Even though you have a case on it, it sounds like it was probably damaged by one of the falls. Most cases as far as I'm aware mostly protect the display. The shock from impact can still damage internal components, even with a case built with this in mind.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Hey thanks for replying!
I drained the battery and got a new charge in it and managed to get it booted up
however now the problem of the lock button is still here.
like if i use it to lock my screen it just turns off on me, and it takes multiple times for me to get the phone up and running again.

you could see if you could find a widget or widgets that will basically put a button on your screen that can power off, enable lock screen, reboot recovery/download, etc.
Then just use the HOME button to turn the screen back on.
It sounds to me like a hardware problem, but if you can flash another Rom and do a full wipe/factory reset you'll know for sure.
I hope this helps. Not sure what else you can do besides getting it repaired or replaced unfortunately.
Maybe someone else will have a better idea though.
Sent from my SGH-T999L using xda premium

[Q] URGENT HELP:Phone won't boot

I've had they Hercules for just over a year now but have only been using it for the past four months. I have only downloaded educational apps. However, yesterday i was not using it and came back to find it vibrating every 2-3 seconds. I removed the battery and left it out for an hour. When i replaced the battery, the phone began to reload but stopped during the boot,made a noise I've never heard before and began to vibrate as if going into recovery/download mode. I have been running ics for the past 4 months. The phone does not boot at all and is very frustrating . I have also tried charging it with no luck. Can anyone assist me with this problem??

sounds like you have the dreadful power button fail it gets a little jammed up try sticking a toothpick or something skinny in there and wiggle it a bit see if that works for you if not check if your still under warranty are you rooted or stock ICS?

u have a bad power button. try unsticking it.

Agreed. A friend had a similar issue and his power button was stuck.

I'm rooted and the warranty is up
Sent from my GT-P5100 using xda app-developers app

did u try fixing the button? if not you'll have to pay to get it repaired

So it appears that it's something wrong with the chipset...
Sent from my GT-P5100 using xda app-developers app

Samz1 said:
So it appears that it's something wrong with the chipset...
Sent from my GT-P5100 using xda app-developers app
Click to expand...
Click to collapse
Literally your power button is stuck.

Samz1 said:
So it appears that it's something wrong with the chipset...
Sent from my GT-P5100 using xda app-developers app
Click to expand...
Click to collapse
Strange enough this just happened to me 10 minutes ago. I did manage to get the phone to boot after slapping the hell out if my power button which gave me the only means to get into recovery so now I can comment from experience. Ive been running pac for 3 weeks. Just yesterday my phone started doing really weird ****, dont know if it's just coincidence, calls would go through to random people, every time I clicked gallery I got a random reboot, I couldnt call voicemail, and trying to change wallpapers gave a reboot. Today I was changing a wallpaper and boom random reboot then began the loop and vibrating. A few things I noticed while this was happening, if I attempted to go into recovery the samsung splash screen appeared followed by the stock kernel splash( samsung and the blue bar at the bottom) which made me believe it wasnt the power button but indeed rom or kernel problem, also my led flashed once while going through the vibrate loop and I know the power button has nothing to do with that. I did manage to get pac to boot about 4 times by slapping the hell out of my power button but it went back to the loop after a few seconds so the next time I managed to get it to boot I held the power button and booted to recovery. Once I was able to get in to recovery I restored a liquid smooth back up. Ive powered the phone off and on with no problem. Now I'm just waiting to see what happens through out the day. I was running pac with cerux when this happened. I truly believe this is not a hardware problem at all until I get it again with another set up. If you need help I getting your phone to boot I could possibly be of assistance so pm me unless you want to keep getting responses from people who haven't experienced this at all. This was the single most scariest experience Ive had since I ve been flashing, even worse than my brick because I knew I bricked immediately.

Phone keeps rebooting/vibrate pulsing

Okay I flashed stock ICS thru ODIN. did a factory restore in the stock recovery. Still no help. I even downgraded to gingerbread with odin and did a factory restore through stock recovery again. still the phone keeps RESTARTING OVER AND OVER AND OVER..... I dont know what to do. Whats going on??? any help would be much appreciated

Its a sticky power button.
There has been plenty of threads about this. Search and ull find me and my suggestions on several of them.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

bzlik88 said:
Its a sticky power button.
There has been plenty of threads about this. Search and ull find me and my suggestions on several of them.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Cant be because it does not restart in recovery mode or download mode. I actually did a full wipe system and it fixed the issue. But now i realize when i start downloading my banking app, pandora, and other apps it starts crashing again. I dont know what to do. I guess I cant use any apps on my galaxy s2... lol this is sooooo stupid

rayoubi said:
Cant be because it does not restart in recovery mode or download mode. I actually did a full wipe system and it fixed the issue. But now i realize when i start downloading my banking app, pandora, and other apps it starts crashing again. I dont know what to do. I guess I cant use any apps on my galaxy s2... lol this is sooooo stupid
Click to expand...
Click to collapse
Hmmm interesting....
Would u mind going to a custom ROM? If not then I suggest u try slimstar 2.2 and see if everything works. I think its whatever ROM u downloaded....keep me posted
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

rayoubi said:
Okay I flashed stock ICS thru ODIN. did a factory restore in the stock recovery. Still no help. I even downgraded to gingerbread with odin and did a factory restore through stock recovery again. still the phone keeps RESTARTING OVER AND OVER AND OVER..... I dont know what to do. Whats going on??? any help would be much appreciated
Click to expand...
Click to collapse
i work reparing cellphones and t989 have 2 problems, one of them is power button problems and the other one is board problems.. that poblem come with most of gs2.. i mean isnt the first time i see it...

My t989 is having the same problem
xX_Psycho_PR_Xx said:
i work reparing cellphones and t989 have 2 problems, one of them is power button problems and the other one is board problems.. that poblem come with most of gs2.. i mean isnt the first time i see it...
Click to expand...
Click to collapse
I took it to a repair shop, where I was told to send it to Samsung to do a heavy-duty root. The power button does need to be replaced because there is no spring when you push down on it. I have no idea if there's a root glitch. Has anyone sent their phone to Samsung? What happened? Are there alternatives?
Thank you!

chicamama said:
I took it to a repair shop, where I was told to send it to Samsung to do a heavy-duty root. The power button does need to be replaced because there is no spring when you push down on it. I have no idea if there's a root glitch. Has anyone sent their phone to Samsung? What happened? Are there alternatives?
Thank you!
Click to expand...
Click to collapse
It was amazing, I had the same problem but all i did was open up the back up undoing all the tiny screws and then took a can on compressed air and sprayed out the power button and its been working for more than a month now with the problem completely gone! try that first before sending to sammy.

Ok I am in the same boat. My device does not boot up, it will get to Samsung logo and restart half the time and the other half just vibrates every 2 seconds. I removed the battery while plugged in and it still vibrates. I took it apart and blew the power button with compressed air and nothing. Here is the funny thing if I bang the hell out of it, it almost boots up. Is there something that I can do less than sending it to Sammy ? If not I will sell it on craigslist for parts.

saldebot said:
Ok I am in the same boat. My device does not boot up, it will get to Samsung logo and restart half the time and the other half just vibrates every 2 seconds. I removed the battery while plugged in and it still vibrates. I took it apart and blew the power button with compressed air and nothing. Here is the funny thing if I bang the hell out of it, it almost boots up. Is there something that I can do less than sending it to Sammy ? If not I will sell it on craigslist for parts.
Click to expand...
Click to collapse
Same thing here. Only way to get it to power on is by hitting it, the harder the better it seems. After it turns on, touching the power button will make it go in to the restart loop 90% of the time. This sucks!
For me this started after I dropped my phone...with the case on and on carpet. I have also opened it up and sprayed with compressed air to no avail.

RogueCoyote said:
Same thing here. Only way to get it to power on is by hitting it, the harder the better it seems. After it turns on, touching the power button will make it go in to the restart loop 90% of the time. This sucks!
For me this started after I dropped my phone...with the case on and on carpet. I have also opened it up and sprayed with compressed air to no avail.
Click to expand...
Click to collapse
Hi my problem is the same as I opened it and verify that the power button is fine (I think so) but still do not like someone comes up with a solution?????

Solution in my case !
rayoubi said:
Okay I flashed stock ICS thru ODIN. did a factory restore in the stock recovery. Still no help. I even downgraded to gingerbread with odin and did a factory restore through stock recovery again. still the phone keeps RESTARTING OVER AND OVER AND OVER..... I dont know what to do. Whats going on??? any help would be much appreciated
Click to expand...
Click to collapse
Hi Folks,
I had the same problem, the problem started when I dropped my fone on carpeted floor, here are symptoms
Fone restarts on its own, start the boot, inbetween the boot starts again, then, keeps vibrating every two seconds, you have to pull the battery out to stop it,
As soon as you put the battery back in, it restarts, again getting stuck, and then vibrating every two secods,
Here is what i did
- Cursed Samsung for making a sh***y phone - Didnt work
- Smacked my phone with whatever I could fine - Didnt work
- Opened all the screws up, took apart phone, pulled out the power button module (pcb), noticed power button was loose,put some glue into it, dried it, put it back, & ITS BEEN WORKING SINCE THEN ! It was a hardware fault, its not software !
Just my two cents, it worked in my case, I cannot guarantee if it will in your case too, try at your own risk !!

jctusa7 said:
It was amazing, I had the same problem but all i did was open up the back up undoing all the tiny screws and then took a can on compressed air and sprayed out the power button and its been working for more than a month now with the problem completely gone! try that first before sending to sammy.
Click to expand...
Click to collapse
Heh, I can't believe this... but it worked for me... powered on my air compressor, took logic board out, and Air Air Air in to the power button area, worked ! Thank you for this tip jctusa7

SAME
rayoubi said:
Okay I flashed stock ICS thru ODIN. did a factory restore in the stock recovery. Still no help. I even downgraded to gingerbread with odin and did a factory restore through stock recovery again. still the phone keeps RESTARTING OVER AND OVER AND OVER..... I dont know what to do. Whats going on??? any help would be much appreciated
Click to expand...
Click to collapse
I need this fixed

Tyler Tigner said:
I need this fixed
Click to expand...
Click to collapse
Watch this video, it's how I fixed mine a few months ago: youtube.com/watch?v=pqBgbN8NLjI

Malth said:
Watch this video, it's how I fixed mine a few months ago: youtube.com/watch?v=pqBgbN8NLjI
Click to expand...
Click to collapse
Same issue with SGH-M919. I was rooted and the rom I tried to use wouldn't work because the kernel caused some issues so I figured I would go back to stock. The device wouldn't go into recovery mode, so I flashed the stock rom via Odin. After the ROM loaded, the phone reset and I saw the Samsung screen then it rebooted and so on each time. It's not the power button as it works, has the spring feel to it and the phone would come one by itself if it was broken. So what can I do or am I in trouble?
Also, the phone will vibrate every 2 seconds

djerick3 said:
Same issue with SGH-M919. I was rooted and the rom I tried to use wouldn't work because the kernel caused some issues so I figured I would go back to stock. The device wouldn't go into recovery mode, so I flashed the stock rom via Odin. After the ROM loaded, the phone reset and I saw the Samsung screen then it rebooted and so on each time. It's not the power button as it works, has the spring feel to it and the phone would come one by itself if it was broken. So what can I do or am I in trouble?
Also, the phone will vibrate every 2 seconds
Click to expand...
Click to collapse
Sure, the power button will "work", but if it's constantly vibrating and rebooting, it's probably an issue with the power button. Do what it shows in the video I posted, and if you do it right it'll probably fix it. I gad to attempt it twice as it didn't fix it the first time, but it's been like 4 months and I haven't had an issue since.

Thank you but it was the kernel causing problems. Somehow, the new ROM messed up the partitions and subsequently required a full wipe including all data then I flashed the stock ROM back via Odin and it was fine. I rooted it again and flashed Bliss Pop 1.8 and I love that ROM. No issues at all. Thanks for the help. I'm slowly learning about ROMs and Linux etc.. I appreciate the help. Does anyone have any advice as to how I can learn more??? Where do I post to get past this 10 posts rule???
Eric
Sent from my LG-LS990 using XDA Free mobile app
---------- Post added at 12:39 AM ---------- Previous post was at 12:29 AM ----------
Sent from my LG-LS990 using XDA Free mobile app
Wow I just realized that post was from a week ago and that was for my girls S4. We got rid of it anyway. My response was regarding my Sprint LG G3 which I am slowly mastering.

Same thing here but here i have a Lenovo …idk what to do

[Q] Phone won't continue boot up

Hi all, I'm really hoping someone can help me with this. I'm not sure if the phone is hard bricked as it starts up after a battery pull but shuts down immediately after no matter what mode I try to boot up in. On a normal start up it gets to the splash screen then shuts off and is unresponsive without another battery pull which triggers an automatic reboot. Trying to boot into recovery never works as I never get to the 2nd splash screen before the phone shuts back down and going into download it shuts off as soon as I get andy on the screen. Also in addition when I connect it to my computer it's usually off since I can't start it up and my computer won't recognize it regardless even if I manage to get it to turn on when connected. Any ideas? I haven't flashed anything today and it was working fine, a random reboot in walmart and it was dying then it just died and nothing is working even swapping in the battery from the gfs s3. Help me pls if it helps I was on the tw s4 dream rom and kt 5-31 kernel and used team kernelizers mod build props and all. Help pls guys

Shels said:
Hi all, I'm really hoping someone can help me with this. I'm not sure if the phone is hard bricked as it starts up after a battery pull but shuts down immediately after no matter what mode I try to boot up in. On a normal start up it gets to the splash screen then shuts off and is unresponsive without another battery pull which triggers an automatic reboot. Trying to boot into recovery never works as I never get to the 2nd splash screen before the phone shuts back down and going into download it shuts off as soon as I get andy on the screen. Also in addition when I connect it to my computer it's usually off since I can't start it up and my computer won't recognize it regardless even if I manage to get it to turn on when connected. Any ideas? I haven't flashed anything today and it was working fine, a random reboot in walmart and it was dying then it just died and nothing is working even swapping in the battery from the gfs s3. Help me pls if it helps I was on the tw s4 dream rom and kt 5-31 kernel and used team kernelizers mod build props and all. Help pls guys
Click to expand...
Click to collapse
Hey man,
Not hard bricked.
Did you try to over clock your device? Did you mess with the kernel settings at all?
When you place the battery in your device does it automatically turn on or do you still have to hold down the power button?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

ryankgrant said:
Hey man,
Not hard bricked.
Did you try to over clock your device? Did you mess with the kernel settings at all?
When you place the battery in your device does it automatically turn on or do you still have to hold down the power button?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thank you god tell me you know how to fix it too lol.
Yea I have I use KT's kernel and use presets from team kernelizers, personally I think I know what the issue is I just didn't want to go around tossing blame. I don't think my phone likes the build prop mods included in there tk mod package. It started acting funny after I flashed them, but I figured the phone would settle down after a few cycles. I was actually about to revert them once the phone booted but it never happened. Sorry for long winding it and it turns on autmoatically. Nothing happens when I press the power button, it also shuts off within 2-3 seconds regardless of what mode I try to boot into. Pls help me if you can, I'm hoping I can fix this in the comfort of my home and not take it out for jtag repair.

Shels said:
Thank you god tell me you know how to fix it too lol.
Yea I have I use KT's kernel and use presets from team kernelizers, personally I think I know what the issue is I just didn't want to go around tossing blame. I don't think my phone likes the build prop mods included in there tk mod package. It started acting funny after I flashed them, but I figured the phone would settle down after a few cycles. I was actually about to revert them once the phone booted but it never happened. Sorry for long winding it and it turns on autmoatically. Nothing happens when I press the power button, it also shuts off within 2-3 seconds regardless of what mode I try to boot into. Pls help me if you can, I'm hoping I can fix this in the comfort of my home and not take it out for jtag repair.
Click to expand...
Click to collapse
I've had problems where I've tried to over clock my device and its sent me into a crazy boot loop but I was able to get into the device in between boots and change it back to stock(which obviously you Dont have the luxury of doing) so I'm kind of at a loss. If you put your battery in and the phone automatically boots without you pressing the power button then that might be your cause for the rapid reboots. I suggest you look into getting the power button repaired if that's the case. Or do it yourself. Shouldn't be too expensive. Hopefully someone in the community. Can shed some light on this matter better than I but from where I'm standing that seems to be your only option. I'm sorry I Dont have have a fix for you. Goodluck
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

ryankgrant said:
I've had problems where I've tried to over clock my device and its sent me into a crazy boot loop but I was able to get into the device in between boots and change it back to stock(which obviously you Dont have the luxury of doing) so I'm kind of at a loss. If you put your battery in and the phone automatically boots without you pressing the power button then that might be your cause for the rapid reboots. I suggest you look into getting the power button repaired if that's the case. Or do it yourself. Shouldn't be too expensive. Hopefully someone in the community. Can shed some light on this matter better than I but from where I'm standing that seems to be your only option. I'm sorry I Dont have have a fix for you. Goodluck
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It's funny, nothing would work. I went up to the cottage for a week came back down started messing with it and I managed to get it to freeze on the splash screen, my computer would recognize it though so it was a start. I then connected it to the pc and tried to flash stock through odin(obviously wouldn't work because the phone wasn't in download mode) so I tried to boot into dl mode it took a couple tries but it finally stuck. I was then able to flash stock and it's been fine ever since. I just rooted it and installed twrp. I want to flash a rom but the links for the roms I want is down so I'll wait or flash an old version of the rom I got on my sd. Thanks for the response and I'm just glad I got it to work and didn't have to pay the $50 for jtag repair which is what I was about to do lol.

Shels said:
It's funny, nothing would work. I went up to the cottage for a week came back down started messing with it and I managed to get it to freeze on the splash screen, my computer would recognize it though so it was a start. I then connected it to the pc and tried to flash stock through odin(obviously wouldn't work because the phone wasn't in download mode) so I tried to boot into dl mode it took a couple tries but it finally stuck. I was then able to flash stock and it's been fine ever since. I just rooted it and installed twrp. I want to flash a rom but the links for the roms I want is down so I'll wait or flash an old version of the rom I got on my sd. Thanks for the response and I'm just glad I got it to work and didn't have to pay the $50 for jtag repair which is what I was about to do lol.
Click to expand...
Click to collapse
Dude!!, so glad you got it to get working again and no need to thank me just click that thanks button hahah. Cheers :beer:
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

[Q] just want to confirm if this is hard bricked

So I bought 2 sgh-t989 at the same time... one for me and the other for my sister
she lives in another city but whenever we see each other, I've always tried to make sure that her phone is running the exact same setup as mine just so I can always provide "tech support" for her phone
anyway, she went on some trip and afterwards, she said her phone wouldn't boot up anymore
since she couldn't get a hold of me, she brought her phone to a store to try and get it fixed (bad bad mistake)
she left the phone at the store for a day to determine how much it would cost to fix it
after being quoted $100 for the fix, she decided it was too much to pay and just took her phone back
long story short... a week later, I finally have the phone in my hand... and this phone won't boots up, i've put in fully charged batteries and when I press (and hold) the power button, it does absolutely NOTHING... not even that initial vibration when it boots up
i've tried to plug it to the computer and it doesn't get recognize
its permanently off and i can't, for the life of me, figure out just how to even boot this thing into TWRP... just so I can attempt to recover her files
SO.... my question... is this truly bricked?
do I have to break the news to her that all the pictures she took on the trip is now unrecoverable?

plug it into the computer and see what it gets recognized as. if its qualcomm823830283203 some like that its hardbricked

JesusWazBlack said:
plug it into the computer and see what it gets recognized as. if its qualcomm823830283203 some like that its hardbricked
Click to expand...
Click to collapse
it doesn't get recognized at all... cuz there's no way for me to power it up

chan1628 said:
it doesn't get recognized at all... cuz there's no way for me to power it up
Click to expand...
Click to collapse
Definite hard brick and if you do hook it to the computer and it says qhs usb download that means brick as well.
Sent from my SGH-M919 using Tapatalk 2

richardlibeau said:
Definite hard brick and if you do hook it to the computer and it says qhs usb download that means brick as well.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
.... it is as i expected
thx for the help though

chan1628 said:
.... it is as i expected
thx for the help though
Click to expand...
Click to collapse
Had three myself in the past few years but none recently so don't feel bad happens to the best of us.
Sent from my SGH-M919 using Tapatalk 2

richardlibeau said:
Had three myself in the past few years but none recently so don't feel bad happens to the best of us.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
oh man... i hate giving the "i'm sorry, but I can't recover your pictures" speech
esp. to women... sometimes they cry and its so....
wish me luck:good:

JTAG for 50 bucks and your golden
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

jtag
holeindalip said:
JTAG for 50 bucks and your golden
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I am hard bricked as well tried updating to new cm10.2 nightly with AJK kernel accidently installed AJK kernel for wrong version oops and now hard bricked wont turn on what so ever. Looked into what phones can be fixed with JIFFY box and JTAG and noticed SGH-t989 not in the list so i am just wondering if this list is wrong and SGH-t989 can actually be saved!?!? any help is appreciated.

Mobile tech videos can fix ya up for 50 if is indeed hard bricked
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

I bricked my S2 last Saturday night, just got it back form Jtag service. Took a week and 28 bucks from the ebay vendor that performed the service.
Now that my phone is back to stock, can anyone help me to load TWRP again. I have odin, latest USB drivers, and TWRP for my phone...but cant seem to get to the ODIN restore screen on the phone.
Volume Up, down, left right, left right, A, B Start. Oh wait I think that was for contra.....
Please help to get me to the Odin load on phone.
I can then flash TWRP thru odin, get to TWRP and load my favorite ROM.
Any GURUS, Please confirm that this is right. I remember a complicated process when rooting initially, loading root file on SD card, similar process up down ect....
But since the rom I am flashing is already rooted, is it required to go thru the gyrations. cant I just flash TWRP and flash a rooted rom?

dss4me3 said:
..
But since the rom I am flashing is already rooted, is it required to go thru the gyrations. cant I just flash TWRP and flash a rooted rom?
Click to expand...
Click to collapse
Just Odin flash TWRP and then flash your rooted ROM.
Download mode= Volume up + volume down + plug USB into computer.

Wont boot up, just keeps vibrating, bricked?
JesusWazBlack said:
plug it into the computer and see what it gets recognized as. if its qualcomm823830283203 some like that its hardbricked
Click to expand...
Click to collapse
I want to know if my phone is bricked, its a Samsung glaxy sgh-T898 (but from telus) i am using a cynagenmod custom rom 10
i was using it then it went idle then when i went to unlock it back, it shut off and started to repeatedly vibrate like a pulse
so i then did a battery pull and then it vibrate and the "Samsung sgh-t898 logo appeared" for a sec or 2 and the phone shut back off and did the pulsing vibrating thing
i got the same result when i plug it into the charger and computer, even plug it in without the battery in it and pulsing vibrating happen again.
ps this had happen in the past but the phone came on like after 5 mins of, its now been hours it wont come on just keep vibrating

omari3 said:
I want to know if my phone is bricked, its a Samsung glaxy sgh-T898 (but from telus) i am using a cynagenmod custom rom 10
i was using it then it went idle then when i went to unlock it back, it shut off and started to repeatedly vibrate like a pulse
so i then did a battery pull and then it vibrate and the "Samsung sgh-t898 logo appeared" for a sec or 2 and the phone shut back off and did the pulsing vibrating thing
i got the same result when i plug it into the charger and computer, even plug it in without the battery in it and pulsing vibrating happen again.
ps this had happen in the past but the phone came on like after 5 mins of, its now been hours it wont come on just keep vibrating
Click to expand...
Click to collapse
looks like the sticky power button. First try putting compressed air on your power button. then resort to this method http://forum.xda-developers.com/showthread.php?t=1931310

JesusWazBlack said:
looks like the sticky power button. First try putting compressed air on your power button. then resort to this method http://forum.xda-developers.com/showthread.php?t=1931310
Click to expand...
Click to collapse
Thanks for replying so quickly , i think you might be right about sticky power button, because when put in the battery the vibrates begins
automatically and then i try turn on then hold the power and volume keys it entered into download menu but for 2 secs then shut off again and begin to start vibrating(pulsing again)
so i guess the download menu means its not brick, will try suggestion once i get a proper torque screw driver