I am running rooted stock 4.0.4 IMM76K with FC04/FC05 radios on a Verizon Nexus. I can not get the stock tethering or wifi tether to work. Both turn on without errors but none of my computers see the signal. I have always used wifi tether on other phones and not seen an issue. I have searched around but I can't seem to find anyone with my issues. Any suggestions?
I would try using an app like foxfi or pdanet. Both work well for wifi tethering. Also, both have the ability to hide tethering usage. You may have to sideload these apps, i believe Verizon wont let you get to them anymore. Also, I would no blow through my data allowence if I were you. This might cause them to get look a little more carefully at your data usage.
Try tetherbee.
It worked for me.
U must search online for it though.
gregory99mar said:
I would try using an app like foxfi or pdanet. Both work well for wifi tethering. Also, both have the ability to hide tethering usage. You may have to sideload these apps, i believe Verizon wont let you get to them anymore. Also, I would no blow through my data allowence if I were you. This might cause them to get look a little more carefully at your data usage.
Click to expand...
Click to collapse
Verizon still allows my mom to tether for free.
Even she'll get in trouble if she gets caught.
Would this be a rom or kernel issue? It doesn't seem to be a application issue? Many others have used both the options I have tried already without issues on the Nexus
drewcam888 said:
Would this be a rom or kernel issue? It doesn't seem to be a application issue? Many others have used both the options I have tried already without issues on the Nexus
Click to expand...
Click to collapse
AOKP unlocks and bypasses the tether message/error.
It's the stock rom issue it is disabled from what I was told.. I use aokp 39 using the built in tether and it works great
Sent from my Galaxy Nexus using Tapatalk 2
You need to set Wifi tether settings as follows:
Device Profile - Samsung Galaxy Nexus (CDMA/LTE)
Setup Method - Netd (master)
Routing Fix - make sure its checked.
Hope this helps
bgmikejr said:
You need to set Wifi tether settings as follows:
Device Profile - Samsung Galaxy Nexus (CDMA/LTE)
Setup Method - Netd (master)
Routing Fix - make sure its checked.
Hope this helps
Click to expand...
Click to collapse
This did not work any other suggestions?
DLD511 said:
AOKP unlocks and bypasses the tether message/error.
Click to expand...
Click to collapse
As stated before I have no error messages.
bryantjopplin said:
It's the stock rom issue it is disabled from what I was told.. I use aokp 39 using the built in tether and it works great
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I forgot to mention that I installed a rom mod to enable native tethering.
I made a blunder. Apparently wifi tether didn't like the space I put in the SSID name.
drewcam888 said:
This did not work any other suggestions?
Click to expand...
Click to collapse
What version are you running as I am using wifi_tether_v3_1-beta14. If you dont have that version here you go http://goo.gl/UbxFo make sure the settings are the same as I posted above. Hope this helps
can you list all your settings
Related
Hello, I've been trying to figure out how would I get wifi tethering to work on Paranoid Android. I've been searching now and I found a thread to download it and such. I read the changelog and I noticed this above v1.2
"-Wifi Tethering doesnt works, but USB/Bluetooth works fine"
Has this been fixed on the newest version? I really want to download Paranoid Android on my phone but one of the things that I NEED are USB and Wifi Tethering, because USB and Wifi Tethering are the only ways I can access the internet on my PC/Game Systems/etc... This ROM seems so cool too, but I can't download it if Wifi tethering won't work.
Oh, and if you want to know what phone I have in case of any reason, I have the Samsung Galaxy Nexus (Toro).
Thanks.
Godson777 said:
Hello, I've been trying to figure out how would I get wifi tethering to work on Paranoid Android. I've been searching now and I found a thread to download it and such. I read the changelog and I noticed this above v1.2
"-Wifi Tethering doesnt works, but USB/Bluetooth works fine"
Has this been fixed on the newest version? I really want to download Paranoid Android on my phone but one of the things that I NEED are USB and Wifi Tethering, because USB and Wifi Tethering are the only ways I can access the internet on my PC/Game Systems/etc... This ROM seems so cool too, but I can't download it if Wifi tethering won't work.
Oh, and if you want to know what phone I have in case of any reason, I have the Samsung Galaxy Nexus (Toro).
Thanks.
Click to expand...
Click to collapse
I'm running PA on my GNexus and wifi tether works flawlessly, I've not tried USB tether but the option is there and I've no reason to suspect it won't work.
PA is a great ROM, make a nandroid and flash it, you have nothing to lose. :good:
be4con said:
I'm running PA on my GNexus and wifi tether works flawlessly, I've not tried USB tether but the option is there and I've no reason to suspect it won't work.
PA is a great ROM, make a nandroid and flash it, you have nothing to lose. :good:
Click to expand...
Click to collapse
be4con, how would I be able to use wifi tethering? Would Wifi Tether for Root users work? (This one. http://code.google.com/p/android-wifi-tether/downloads/list) I've tried using it but it doesn't seem to work, is there another way I can tether via Wifi?
Godson777 said:
be4con, how would I be able to use wifi tethering? Would Wifi Tether for Root users work? (This one. http://code.google.com/p/android-wifi-tether/downloads/list) I've tried using it but it doesn't seem to work, is there another way I can tether via Wifi?
Click to expand...
Click to collapse
You don't need a third party app, I'm just using the built in JB wifi tethering.
Sent from my Galaxy Nexus using Tapatalk 2
be4con said:
You don't need a third party app, I'm just using the built in JB wifi tethering.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
How do I do that? I don't know how to do it? Will verizon charge me and give me a 2GB cap? I'm used to using that app, so I don't know how to tether via wifi. >.<
be4con said:
You don't need a third party app, I'm just using the built in JB wifi tethering.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
So, I just go on settings and use the systems wifi tethering? Will verizon notice I'm doing that and charge me for that? Thats my only problem too, the third party app that I use doesn't charge me or anything. So, won't using the normal tether on the settings menu (while on Paranoid Android) cause verizon to charge me for that feature? Please answer ASAP.
Whilst I was on stock I tried and failed to use the 3rd party app I had prev used on GB to tether so I think it is a JB issue rather than a PA one.
Regardless of how you tether you will use data and incur data charges from Verizon. That may or may not be against your contract rules. Your 3rd party app was still using data which Verizon will have been charging you for.
To tether on JB you go to settings > wireless and networks > more... > tethering and portable hotspot.
Sent from my Galaxy Nexus using Tapatalk 2
be4con said:
Whilst I was on stock I tried and failed to use the 3rd party app I had prev used on GB to tether so I think it is a JB issue rather than a PA one.
Regardless of how you tether you will use data and incur data charges from Verizon. That may or may not be against your contract rules. Your 3rd party app was still using data which Verizon will have been charging you for.
To tether on JB you go to settings > wireless and networks > more... > tethering and portable hotspot.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
What I ment was Verizon has a extra service for making a wifi hotspot, that you'd have to pay monthly. So it sucks actually, I don't want to be paying for two services. The third party app actually bypasses it or something, because it works fine without Verizon noticing. But, again, I don't want to be paying for two services.
I can't really answer that question then, though I don't see how the JB tethering will work any differently to the 3rd party app in that respect.
Maybe someone on Verizon will be able to confirm, or you could just try it and see.
Sent from my Galaxy Nexus using Tapatalk 2
Well I have read through the development thread of ktoonsez and task's kernel and rom and even used yes search in the thread and have come up with no answers. When I was on ICS I had no issue with Wi-Fi tethering but since I have moved to this rom I can create the hotspots however there is no internet connection. I found a couple posts in the thread using the search but they seem to be gone from the actual thread since after I click the link it's not on the page that pops up.
I am currently running both the ktoonsez & task rom and kernel (latest versions) on a bell I747m with MVLDLK4 modems on MTS . I don't have a tethering plan but when I was on ICS it didn't seem to matter. Can anyone help me out or point me in the right direction?
Sent from my SGH-I747 using xda app-developers app
Same Issue
kellz204 said:
Well I have read through the development thread of ktoonsez and task's kernel and rom and even used yes search in the thread and have come up with no answers. When I was on ICS I had no issue with Wi-Fi tethering but since I have moved to this rom I can create the hotspots however there is no internet connection. I found a couple posts in the thread using the search but they seem to be gone from the actual thread since after I click the link it's not on the page that pops up.
I am currently running both the ktoonsez & task rom and kernel (latest versions) on a bell I747m with MVLDLK4 modems on MTS . I don't have a tethering plan but when I was on ICS it didn't seem to matter. Can anyone help me out or point me in the right direction?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I have a similar issue. I want to get the mobile hot spot to work. But Im not sure what root I need to have that. What root were you using before to get your mobile hot spot to work? Thanks.
Gamerxx13 said:
I have a similar issue. I want to get the mobile hot spot to work. But Im not sure what root I need to have that. What root were you using before to get your mobile hot spot to work? Thanks.
Click to expand...
Click to collapse
If you are talking about using the WIFI Tether app Jelly Bean essentially broke it. The devs are working on a fix. XDA member Treve has a mod that will get it to work though. His OP is posted in the Verizon forums but I can assure you it works on our AT&T phones. I used it last night. There is an issue worth noting that once you tether and untether your WIFI won't work again until you clear cache and reboot. It is a minor annoyance IMO but I threw it out there so no one freaks out.
If you are talking about straight stock tethering I haven't run into the issue myself. My stock tether/WIFI hotspot works flawlessly. After updating to 4.1.1 did you do a full data wipe? If not I would recommend it. I ran into all kinds of bugs after doing the Kies update. Battery drain, Google Now had a learning disability, etc.
Do a google search for Treve WIFI Tether mod for the link and give it a go. In the OP he says that secure tethering doesn't work. It does. Used it last night as a test.
Also if you have a rooted phone already download mobile odin. You can have the app reflash the stock .tar and inject everoot and SuperSU. That's what I generally do when a new OTA is released. Hasn't failed me yet. Any questions shoot me a PM.
Sent from my Nexus 7 using xda premium
OmRomRom said:
If you are talking about using the WIFI Tether app Jelly Bean essentially broke it. The devs are working on a fix. XDA member Treve has a mod that will get it to work though. His OP is posted in the Verizon forums but I can assure you it works on our AT&T phones. I used it last night. There is an issue worth noting that once you tether and untether your WIFI won't work again until you clear cache and reboot. It is a minor annoyance IMO but I threw it out there so no one freaks out.
If you are talking about straight stock tethering I haven't run into the issue myself. My stock tether/WIFI hotspot works flawlessly. After updating to 4.1.1 did you do a full data wipe? If not I would recommend it. I ran into all kinds of bugs after doing the Kies update. Battery drain, Google Now had a learning disability, etc.
Do a google search for Treve WIFI Tether mod for the link and give it a go. In the OP he says that secure tethering doesn't work. It does. Used it last night as a test.
Click to expand...
Click to collapse
Wifi Tether works. The old version stopped working for me after upgrading to JB, but I downloaded a different beta. You have to download the TrevE Mod, wifi_tether_v3_3-pre2.apk.
Also I had to change some settings.
Device profile is set to GS3.
Fallback tether is enabled.
Send Netd Max Client Cmd is enabled.
Both Wifi-driver reload options are enabled.
MSS clamping is enabled.
Routing fix is enabled.
This works for me. Sometimes no data will come through but restarting my phone fixes the problem. I'm rooted on stock JB.
mjsierra said:
Wifi Tether works. The old version stopped working for me after upgrading to JB, but I downloaded a different beta. You have to download the TrevE Mod, wifi_tether_v3_3-pre2.apk.
Also I had to change some settings.
Device profile is set to GS3.
Fallback tether is enabled.
Send Netd Max Client Cmd is enabled.
Both Wifi-driver reload options are enabled.
MSS clamping is enabled.
Routing fix is enabled.
This works for me. Sometimes no data will come through but restarting my phone fixes the problem. I'm rooted on stock JB.
Click to expand...
Click to collapse
This Worked! You Sir are a genius, a gentleman and a scholar. THANKS!!
Had a similar issue for a long time, then stumbled onto this gem. Thanks a lot!!
mjsierra said:
Wifi Tether works. The old version stopped working for me after upgrading to JB, but I downloaded a different beta. You have to download the TrevE Mod, wifi_tether_v3_3-pre2.apk.
Also I had to change some settings.
Device profile is set to GS3.
Fallback tether is enabled.
Send Netd Max Client Cmd is enabled.
Both Wifi-driver reload options are enabled.
MSS clamping is enabled.
Routing fix is enabled.
This works for me. Sometimes no data will come through but restarting my phone fixes the problem. I'm rooted on stock JB.
Click to expand...
Click to collapse
Hello Guys,
I am having WIFI Tether issues with any custom AOSP or AOKP rom. Installing a touchwiz related rom somehow resolves the tethering issues.
I've trying all the usual steps before installing a custom rom including wiping everything, factory reset and all that good stuff. But the native tether wont work on these roms. I tried the wifi tether apps in the app store but no success there.
However, what really gets to my nerves is that my daily driver is 4.1.2 liquid smooth rc7 version of the rom which i assume is based on aosp does allow wifi tether but only through the app in the app store. The native app continues to fail.
Someone once told me to install the wifi driver for the phone. Is that possible? If so how? By the way i am running a rogers s3 which is the at&t equivalent in US.
Also, just so you guys know, my other devices do pick up the wireless set up by my phone's tether, but it wont connect to it. password or not, it takes forever to connect and eventually fails.
Any advice?
gutlessmerc said:
Hello Guys,
I am having WIFI Tether issues with any custom AOSP or AOKP rom. Installing a touchwiz related rom somehow resolves the tethering issues.
I've trying all the usual steps before installing a custom rom including wiping everything, factory reset and all that good stuff. But the native tether wont work on these roms. I tried the wifi tether apps in the app store but no success there.
However, what really gets to my nerves is that my daily driver is 4.1.2 liquid smooth rc7 version of the rom which i assume is based on aosp does allow wifi tether but only through the app in the app store. The native app continues to fail.
Someone once told me to install the wifi driver for the phone. Is that possible? If so how? By the way i am running a rogers s3 which is the at&t equivalent in US.
Also, just so you guys know, my other devices do pick up the wireless set up by my phone's tether, but it wont connect to it. password or not, it takes forever to connect and eventually fails.
Any advice?
Click to expand...
Click to collapse
If you carrier is Rogers, you need to make some mods to tether 4G (H+, 3G will work w/o mods). There's a post about it somewhere in Task's AOKP thread, which I believe a search should find it. Google can also help.
Same issue here, Rogers LTE tethering didn't work and tried to google and find the mods as posted.
couldn't find the mods.
Please advise.
BWolf56 said:
If you carrier is Rogers, you need to make some mods to tether 4G (H+, 3G will work w/o mods). There's a post about it somewhere in Task's AOKP thread, which I believe a search should find it. Google can also help.
Click to expand...
Click to collapse
detdett said:
Same issue here, Rogers LTE tethering didn't work and tried to google and find the mods as posted.
couldn't find the mods.
Please advise.
Click to expand...
Click to collapse
Took me 5min... http://forum.xda-developers.com/showpost.php?p=37174490&postcount=21220
Thanks
BWolf56 said:
Took me 5min... http://forum.xda-developers.com/showpost.php?p=37174490&postcount=21220
Click to expand...
Click to collapse
Wow!!
Thank you sooooo soooo much. I spent hours trying to figure a way out to get the tethering to fix. This worked out super easily. You've honestly saved me hours i wouldve spent.
Thank you for persisting with the solution for us.
Cheers.
Yeah, Thanks for the link too
However I am not able to get LTE tethering speed
I am able to get LTE speed (10mbps+) on my S3, however the device that's using the tethering only able to get (~1mbps)
any idea?
gutlessmerc said:
Wow!!
Thank you sooooo soooo much. I spent hours trying to figure a way out to get the tethering to fix. This worked out super easily. You've honestly saved me hours i wouldve spent.
Thank you for persisting with the solution for us.
Cheers.
Click to expand...
Click to collapse
detdett said:
Yeah, Thanks for the link too
However I am not able to get LTE tethering speed
I am able to get LTE speed (10mbps+) on my S3, however the device that's using the tethering only able to get (~1mbps)
any idea?
Click to expand...
Click to collapse
It's dependent of the device receiving it. If it's too old or it's drivers are too old it won't get the speed it should. Also tethering shares the connection, therefor, you won't get full speed on the receiving device.
Could be so many things actually that's it's hard to troubleshoot.
Thanks for the quick reply,
However, I am using CM10.1 latest Nightlies 04/26.
BWolf56 said:
It's dependent of the device receiving it. If it's too old or it's drivers are too old it won't get the speed it should. Also tethering shares the connection, therefor, you won't get full speed on the receiving device.
Could be so many things actually that's it's hard to troubleshoot.
Click to expand...
Click to collapse
detdett said:
Thanks for the quick reply,
However, I am using CM10.1 latest Nightlies 04/26.
Click to expand...
Click to collapse
I think you got me wrong.
Your S3 doesn't really matter here as much as the device receiving the connection.
BWolf56 said:
I think you got me wrong.
Your S3 doesn't really matter here as much as the device receiving the connection.
Click to expand...
Click to collapse
so what do you suggest in order to improve the data speed for the tethered device? or is there no way around this?
detdett said:
so what do you suggest in order to improve the data speed for the tethered device? or is there no way around this?
Click to expand...
Click to collapse
Like I said, it's dependent of so many things. First off, what device it receiving it? Is that device old? Are it's drivers up to date? Does it have a good reception/connectivity?
Did you try tethering to other devices?
BWolf56 said:
Like I said, it's dependent of so many things. First off, what device it receiving it? Is that device old? Are it's drivers up to date? Does it have a good reception/connectivity?
Did you try tethering to other devices?
Click to expand...
Click to collapse
I use it to tether my HP Touchpad running Jellybean 4.1.2 developed my J.C. Sullins. Link
detdett said:
I use it to tether my HP Touchpad running Jellybean 4.1.2 developed my J.C. Sullins. Link
Click to expand...
Click to collapse
Did you try USB, WiFi and BT tethering? (test their respective speed)
oh, Sorry,
I am using my laptop with windows 7.
BWolf56 said:
I think you got me wrong.
Your S3 doesn't really matter here as much as the device receiving the connection.
Click to expand...
Click to collapse
This is the first time I have posted here so I do not know if I put this in the right area, sorry if I did not.
I have the ATT sgh-i467 note 8.0 and I have been trying to use wifi tethering. After doing some investigation, it turns out that ATT blocks tethering unless you pay them a tethering fee or buy the 5 GB plan, What BS that is. I have tried to find a work around and there does not seem to be one.
Has anyone found a wifi tether work around for the ATT note 8?
kramerica099 said:
This is the first time I have posted here so I do not know if I put this in the right area, sorry if I did not.
I have the ATT sgh-i467 note 8.0 and I have been trying to use wifi tethering. After doing some investigation, it turns out that ATT blocks tethering unless you pay them a tethering fee or buy the 5 GB plan, What BS that is. I have tried to find a work around and there does not seem to be one.
Has anyone found a wifi tether work around for the ATT note 8?
Click to expand...
Click to collapse
I use this. It works for me.
http://highonandroid.com/android-ap...android-smartphone-or-tablet-universal-guide/
esoh said:
I use this. It works for me.
http://highonandroid.com/android-ap...android-smartphone-or-tablet-universal-guide/
Click to expand...
Click to collapse
Have you tried the FoxFi app?
chuckr01 said:
Have you tried the FoxFi app?
Click to expand...
Click to collapse
I have tried it and all the other adhoc wifi tethers, they will not work on the new phones and tablets and the carriers have tethering locked out in the device. I was hoping had found another way to do this without a hack.
esoh said:
I use this. It works for me.
I tried this but it did not work, one of the things I could not do was:
Step 10. Scroll down and make sure “MSS clamping” and “Routing fix” are both checked on.
I did not have mss clamping
Did you try this on a ATT note 8.0?
Click to expand...
Click to collapse
I use the native tethering after freezing at&t all access, you can also delete it if you don't want to freeze it.
Sent from my SM-N900T using Tapatalk
photrash said:
I use the native tethering after freezing at&t all access, you can also delete it if you don't want to freeze it.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I just froze it using titanium back up and restarted it. I went to settings then to more settings and I did not see the native tethering show up. Did I miss something?
hemsubli large
SUCCESS!!
The freezing of the att access app worked but it did not bring up the native tether option. I tried foxfi, I could get the computer to connect but it would not go to the internet, so then I tried tetherfy and that worked. I am sending this right now tethered to my note 8.0.
Screw ATT, it makes me so mad that these USA carriers try to screw everyone, I love it.
Thanks,
kramerica099 said:
I just froze it using titanium back up and restarted it. I went to settings then to more settings and I did not see the native tethering show up. Did I miss something?
Click to expand...
Click to collapse
if you don't have it try an app like tethering shortcut in the playstore
https://play.google.com/store/apps/details?id=com.kabasoft.util.TetheringShortcut
photrash said:
if you don't have it try an app like tethering shortcut in the playstore
Thanks, that is perfect, that option is what I could not see. Perfect!!
Click to expand...
Click to collapse
any way to auto kill allaccess?
Thanks to all on here, I was able to get my tether working. I was bummed though to find it disabled the AT&T data widget, as I used that to keep an eye on data used.
Well, I messed around and here is what I discovered...
I un-froze allaccess in Titanium and rebooted. After rebooting I was able to restore the allaccess widget (though tethering was again crippled). I then converted allaccess from a system app to a user app using Titanium, then forced closed it. I was then able to tether again, and the data widget still remained active. This works great until I reboot the unit, then I just need to force close the allaccess again to tether.
I am wondering if there is a way to automatically force close the program upon startup? This would allow use of the widget to monitor data without having to manually fc the allshare program.
Anyone know how to accomplish this?
I know this is probably not the section for this topic but there have been several posts on it with no definitive answers....I use FoxFi WiFi Tether on all my devices without a glitch, even the new Nexus 5, but not this phone " WHY ????? ", it doesn't make sense. With this device it shows a connection to the computer but it wont allow the internet connection....I can use the USB function of the FoxFi but have to install PDAnet to work. I know TrevE WiFi Tether app is installed with most Roms and works to a certain degree but not copletely with ZVC. From what I can deduce, it has something to do with the WPA (WPA2) settings for the phone. This is obviously a Dev issue so will someone with the know-how fix this problem for everyone....Personally, I will be happy to donate to someone to get it done.....so "Brains", get a project going on it and help us out....Thanks...
devo3d said:
I know this is probably not the section for this topic but there have been several posts on it with no definitive answers....I use FoxFi WiFi Tether on all my devices without a glitch, even the new Nexus 5, but not this phone " WHY ????? ", it doesn't make sense. With this device it shows a connection to the computer but it wont allow the internet connection....I can use the USB function of the FoxFi but have to install PDAnet to work. I know TrevE WiFi Tether app is installed with most Roms and works to a certain degree but not copletely with ZVC. From what I can deduce, it has something to do with the WPA (WPA2) settings for the phone. This is obviously a Dev issue so will someone with the know-how fix this problem for everyone....Personally, I will be happy to donate to someone to get it done.....so "Brains", get a project going on it and help us out....Thanks...
Click to expand...
Click to collapse
I never had a problem with Treve Wifi tether, although I don't use it for long at a time I just set device to galaxy nexus cdma/lte and it works. I do wish we had the native option enabled like my wifes S3 and our old Evo's, the native option is by far the best.
That's really weird.. I don't have any issues with WiFi tethering. Please request a moderator to move this to Q&A Wrong Section!!!!
Sent from my LG-LS970 using xda app-developers app
jonahly said:
That's really weird.. I don't have any issues with WiFi tethering. Please request a moderator to move this to Q&A Wrong Section!!!!
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
I'm not the only one with this problem....In the Q&A section there are several posts on this with no solution. I already stated I can use TrevE wifi tether and it connects but it will not let me download torrents or other tracked downloads....I appreciate your input and please humor me by trying to download a torrent and let me know if you can. If you can, please give me your settings and which Rom and Kernel you are using. I placed this thread here to try to get better responses because no one is offering any solutions in any of the other threads.
gorillajuice said:
I never had a problem with Treve Wifi tether, although I don't use it for long at a time I just set device to galaxy nexus cdma/lte and it works. I do wish we had the native option enabled like my wifes S3 and our old Evo's, the native option is by far the best.
Click to expand...
Click to collapse
Thank you for your response. I've tried every setting possible that I know of for TrevE wifi, and like I said, I can connect but it does not let me download torrents and any tracked downloads. When I was on ZV9 Lifeless it worked fine but upgrading to ZVC caused the problems. I will ask you as I asked the other responder, please try to download a torrent with Utorrent and let me know if you can. If you can I would appreciate knowing what Rom, Kernel and Wifi settings you have. Thanks.
devo3d said:
Thank you for your response. I've tried every setting possible that I know of for TrevE wifi, and like I said, I can connect but it does not let me download torrents and any tracked downloads. When I was on ZV9 Lifeless it worked fine but upgrading to ZVC caused the problems. I will ask you as I asked the other responder, please try to download a torrent with Utorrent and let me know if you can. If you can I would appreciate knowing what Rom, Kernel and Wifi settings you have. Thanks.
Click to expand...
Click to collapse
Have you tried with any aosp roms using native tether?
gorillajuice said:
Have you tried with any aosp roms using native tether?
Click to expand...
Click to collapse
Well actually, I've downloaded a couple thinking that would work and tried to install but I can't get data working. I even tried that "apn" fix. At first, I downloaded Kit Kat 4.4, then CM 11. After initial install I don't have any service what so ever then after the "apn" fix, I have service but no data. I've never used AOSP Roms before so apparently I have no idea what I am doing installing them. If you have any pointers I would appreciate it.
PM me if you want.
devo3d said:
Well actually, I've downloaded a couple thinking that would work and tried to install but I can't get data working. I even tried that "apn" fix. At first, I downloaded Kit Kat 4.4, then CM 11. After initial install I don't have any service what so ever then after the "apn" fix, I have service but no data. I've never used AOSP Roms before so apparently I have no idea what I am doing installing them. If you have any pointers I would appreciate it.
PM me if you want.
Click to expand...
Click to collapse
It may be something with your phone then if you cant get tether on any aosp rom. Did you use Freegee to flash recovery? I only ask because the newer aosp roms some require a special recovery for them to flash correctly but if you use Freegee either recovery works just fine.
gorillajuice said:
It may be something with your phone then if you cant get tether on any aosp rom. Did you use Freegee to flash recovery? I only ask because the newer aosp roms some require a special recovery for them to flash correctly but if you use Freegee either recovery works just fine.
Click to expand...
Click to collapse
I guess I'll try to install an AOSP Rom again and see what happens...oh boy :/
I flashef back to dev edition 5.0 and used Treve wifi tether to download a torrent on my wifes S3. The only thing I did was change device profile to generic wlan0 and check send netd max client cmd.
Sent from my LG-LS970 using Tapatalk
gorillajuice said:
I flashef back to dev edition 5.0 and used Treve wifi tether to download a torrent on my wifes S3. The only thing I did was change device profile to generic wlan0 and check send netd max client cmd.
Sent from my LG-LS970 using Tapatalk
Click to expand...
Click to collapse
I was hoping you could do it on this device. TrevE's works on my other phones too, just not this one.
use native
WiFi hotspot on aosp ROMs or custom ROM I'm using Cm11 to feed wifi to my nexus 7 from my ls970.
gorillajuice said:
I flashef back to dev edition 5.0 and used Treve wifi tether to download a torrent on my wifes S3. The only thing I did was change device profile to generic wlan0 and check send netd max client cmd.
Sent from my LG-LS970 using Tapatalk
Click to expand...
Click to collapse
I know this is an issue with the OG because its the only phone FoxFi does not work on.....and Ive tried 17 different phones, all the major brands and a couple china phones too. On my old S3, both FoxFi and TrevE worked fine...Is there a built in firewall in the WiFi system of this phone? Damn i wish I knew how to rewrite script...
devo3d said:
I know this is an issue with the OG because its the only phone FoxFi does not work on.....and Ive tried 17 different phones, all the major brands and a couple china phones too. On my old S3, both FoxFi and TrevE worked fine...Is there a built in firewall in the WiFi system of this phone? Damn i wish I knew how to rewrite script...
Click to expand...
Click to collapse
Im kinda confused now because I've download torrents on my phone and my nexus 7 using utorrent and wifi tether, I just downloaded the Scott Pilgrim vs. the World soundtrack on my nexus 7 so I know it works. I will try Foxfi and see what happens but I would guess Treve wifi would be the better option. Have you tried Treve wifi using the settings I mentioned above, I've been using treve wifi since evo3d days and never had a problem once I got it setup properly.
if we can get through entitlement checks for the tether all the others will work after that i bet. i suck at smali but there are lots of devs that done in here. any takers?
gorillajuice said:
Im kinda confused now because I've download torrents on my phone and my nexus 7 using utorrent and wifi tether, I just downloaded the Scott Pilgrim vs. the World soundtrack on my nexus 7 so I know it works. I will try Foxfi and see what happens but I would guess Treve wifi would be the better option. Have you tried Treve wifi using the settings I mentioned above, I've been using treve wifi since evo3d days and never had a problem once I got it setup properly.
Click to expand...
Click to collapse
Yes, I've tried your settings. I have the DE v5 download....I'll install it again and try your settings on that Rom....do kernels have anything to do with the wifi stuff?
Thanks for continuing to try and help...
Code-Craft said:
if we can get through entitlement checks for the tether all the others will work after that i bet. i suck at smali but there are lots of devs that done in here. any takers?
Click to expand...
Click to collapse
So basically you are saying it is possible to make the wifi tethering issues better for this device, just finding a Dev to work out the problems is the issue..
Like I've said before, I don't mind donating to that project if someone will step up to do it. I'm simple minded when it comes to stuff like that but would it not be possible to copy code from another LG device ( like the Nexus 5) that tether works well and just work it in?
devo3d said:
So basically you are saying it is possible to make the wifi tethering issues better for this device, just finding a Dev to work out the problems is the issue..
Like I've said before, I don't mind donating to that project if someone will step up to do it. I'm simple minded when it comes to stuff like that but would it not be possible to copy code from another LG device ( like the Nexus 5) that tether works well and just work it in?
Click to expand...
Click to collapse
i was looking at another source for the sprint gs4 it is missing all the entitlement smali code in services.jar so even if you delete the entitlement code you have to sift through the other files to delete any other code that defines the entitlement code. ill pull both of them up on a diff viewer.
and see how different they really are....
gorillajuice said:
I flashef back to dev edition 5.0 and used Treve wifi tether to download a torrent on my wifes S3. The only thing I did was change device profile to generic wlan0 and check send netd max client cmd.
Sent from my LG-LS970 using Tapatalk
Click to expand...
Click to collapse
I reinstalled DE 5.0 and used your settings and still get the same thing...it connects and i can download regular files but not torrents...I wonder if its a wifi setting on my computer....
devo3d said:
I reinstalled DE 5.0 and used your settings and still get the same thing...it connects and i can download regular files but not torrents...I wonder if its a wifi setting on my computer....
Click to expand...
Click to collapse
OK I thought you were trying to download on your phone. On your computer you have to make sure the correct ports are open. Im not sure but I think the ports that need to be open for torrents start around 6881 and if its not open the program will try to use the next available port that can be used for torrents. Vuze makes setup easy and is much faster than bittorrent or utorrent and its not constantly downloading background stuff like bittorrent and utorrent.