Related
How can i update my stock rom 1.28 (europe) with the new update 1.29 without change recovery and relock?
i use interim recovery, s-off by htc dev, superuser
please help me
You can't, stock recovery is 100% required
Antoo1984 said:
How can i update my stock rom 1.28 (europe) with the new update 1.29 without change recovery and relock?
i use interim recovery, s-off by htc dev, superuser
please help me
Click to expand...
Click to collapse
I don't know. You can't, sorry.
Me and other few million ppl flashed stock recovery back, installed update and flashed back custom recovery. I am really sorry for you.
i've flashed the stock recovery and lock the bootloader but the update is not installed..what can i do?
Antoo1984 said:
i've flashed the stock recovery and lock the bootloader but the update is not installed..what can i do?
Click to expand...
Click to collapse
Start unlocking bootloader and download update again (press check update).
Maybe a stupid question, but where can I find the stockrecovery? I made a nandroid, but that happened also with CWM...
ljansens said:
Maybe a stupid question, but where can I find the stockrecovery? I made a nandroid, but that happened also with CWM...
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/showthread.php?p=24738635
About half way down 1st post
Sent from my HTC One X using Tapatalk 2
Ok. So i take a backup of what i got now, reinstall stock recovery, install 1.29, install custom recovery and then install my backup?
I get the 1.29 then?
MrDTrack5 said:
Ok. So i take a backup of what i got now, reinstall stock recovery, install 1.29, install custom recovery and then install my backup?
I get the 1.29 then?
Click to expand...
Click to collapse
You don't need to install the backup.You make a nandroid backup in case something goes wrong.After that you take this recovery:
http://mirror.rawempire.org/baadnewz/recovery.img
After this you can update to 1.29.After you updated to 1.29 you have to reflash CWM and after that reflash the Super SU.You don't need to install you'r backup.
I planned on converting my One M8 to a GPE edition but I couldn't gain S-Off, so now I have a phone with root access and TWPR installed. In preparation for HTCs upcoming Lollipop OTA, I would Like to bring my device back to full stock so I can install the OTA. I can't seem to find a way to do this without having S-Off. Could someone help me please?
Thanks, Nathan
nathbullen said:
I planned on converting my One M8 to a GPE edition but I couldn't gain S-Off, so now I have a phone with root access and TWPR installed. In preparation for HTCs upcoming Lollipop OTA, I would Like to bring my device back to full stock so I can install the OTA. I can't seem to find a way to do this without having S-Off. Could someone help me please?
Thanks, Nathan
Click to expand...
Click to collapse
You can always flash to stock recovery
https://www.youtube.com/watch?v=PPPT5J8xG6w
Good luck!
L1nuz said:
You can always flash to stock recovery
Click to expand...
Click to collapse
Will that remove my root user permissions too?
And do I need to relock the boot loader to install OTA's?
Thanks!
nathbullen said:
Will that remove my root user permissions too?
And do I need to relock the boot loader to install OTA's?
Thanks!
Click to expand...
Click to collapse
sakitech didn't mention anything about losing root or relock bootloader requirements to receive OTA updates after following his video.
L1nuz said:
sakitech didn't mention anything about losing root or relock bootloader requirements to receive OTA updates after following his video.
Click to expand...
Click to collapse
No, he didn't, but it was part of my original question!
nathbullen said:
No, he didn't, but it was part of my original question!
Click to expand...
Click to collapse
Oh, sorry for not being clear xD
No, I don't think you will lose root and you don't have to relock bootloader afaik.
Even so.. you can always redo the process of rooting and unlock the bootloader after OTA update.. no biggie
but if you run stock rom and recovery.. it shouldnt affect root or if ure unlocked with OTA updates
I just reverted back to stock last night with s-on. you will have to relock your bootloader (I used a tool kit, but had to boot into the bootloader myself to get the toolkit relock it) and flash a stock RUU (exe or zip). I suggest using an exe to flash if available. I have a sprint HK edition so I used an RUU exe for that model, and all worked perfectly. I was able to install the OTA update they just released with no problem after I was back to stock.
sakitech's method should work too if you want to try and keep root and the bootloader unlocked
If I want to convert my carrier locked m8, Vodafone, to 401 unlocked, what is the correct steps and sequence ?
Am I right with this...
1. S-off with sunshine after taking out box AND before taking any ota updates.
2. Install custom recovery. (So I can flash stock 401 ROM)
3. Flash firmware that matches ROM
4. Flash stock recovery.
The only real doubts I have are the order of steps especially firmware and ROM.
Is it firmware or ROM first ?
Thanks
Sent from M8
Hi,
If it's a GSM phone, Here's the guide for it,
http://forum.xda-developers.com/showthread.php?t=2708567
Good luck!
Thanks for reply but it's not sim unlock I want. I want to convert it from Vodafone UK software to stock wwe, 401, system.
I know the steps, just wondering that I've got the correct sequence in my op.
It is gsm because it's a UK phone.
Thanks
Sent from M8
10rdan said:
Thanks for reply but it's not sim unlock I want. I want to convert it from Vodafone UK software to stock wwe, 401, system.
I know the steps, just wondering that I've got the correct sequence in my op.
It is gsm because it's a UK phone.
Thanks
Sent from M8
Click to expand...
Click to collapse
the only drawback to doing the firmware after the rom is the rom will not have wifi on the old firmware
So the correct order is
unlock bootloader
flash custom recovery / root
s-off
flash firmware
flash rom
flash stock recovery
take updates
clsA said:
the only drawback to doing the firmware after the rom is the rom will not have wifi on the old firmware
So the correct order is
unlock bootloader
flash custom recovery / root
s-off
flash firmware
flash rom
flash stock recovery
take updates
Click to expand...
Click to collapse
Ok, thanks. Just wanted it confirmed before I "melted" the phone.
Sent from M8
clsA said:
the only drawback to doing the firmware after the rom is the rom will not have wifi on the old firmware
So the correct order is
unlock bootloader
flash custom recovery / root
s-off
flash firmware
flash rom
flash stock recovery
take updates
Click to expand...
Click to collapse
Been thinking about this, cause I like to have things clear before starting.
If I s-off with sunshine, because it will unlock bootloader without using HTCdev, then
1. Flash TWRP
2. Take nand
3. Then run this https://www.androidfilehost.com/?fid=95784891001609293
4. Take any ota updates
Will that remove the need to flash 401 firmware, ROM and stock recovery as 3 individual processes ?
Thanks
Edit, will change cid to HTC__001 before running RUU.
Sent from M8
10rdan said:
Been thinking about this, cause I like to have things clear before starting.
If I s-off with sunshine, because it will unlock bootloader without using HTCdev, then
1. Flash TWRP
2. Take nand
3. Then run this https://www.androidfilehost.com/?fid=95784891001609293
4. Take any ota updates
Will that remove the need to flash 401 firmware, ROM and stock recovery as 3 individual processes ?
Thanks
Edit, will change cid to HTC__001 before running RUU.
Sent from M8
Click to expand...
Click to collapse
The RUU will certainly shorten the update process ...Running Sunshine to unlock the bootloader without Root could be a problem
clsA said:
The RUU will certainly shorten the update process ...Running Sunshine to unlock the bootloader without Root could be a problem
Click to expand...
Click to collapse
Sunshine unlocked my bootloader ok with the m8 I'm using just now. Can't remember which hboot I was on at the time. Wasn't rooted, completely stock.
That's why I intend using sunshine BEFORE I take any ota updates, ie, as soon as I get it out the box.
Didn't use sunshine to, primarily, unlock bootloader at the time. It was a welcome "extra".
Cheers
Edit
Copied from Sunshine web site........
SunShine unlocks your device's bootloader and sets it to s-off (HTC ONLY). SunShine does NOT install root binaries on the device. There are a few ways to root your device after using SunShine. The most common and reliable method would be to flash TWRP recovery to your device via fastboot, and flash the root binaries or a rooted ROM from within TWRP.
Sent from M8
Did this yesterday on my new m8. Worked flawlessly with temp root. Rooted after using adb and flashed SuperSU.
Same Question...
So, i've been reading a lot but still don't understand everything right...
I already use sunshine and now my AT&T (4.4.3 by RUU (this)) is s-off and bootloader unlocked. What should be my next step? Just run that RUU that you post will work? And after that i can flash any ROM that need 4.4.4?
guire01 said:
So, i've been reading a lot but still don't understand everything right...
I already use sunshine and now my AT&T (4.4.3 by RUU (this)) is s-off and bootloader unlocked. What should be my next step? Just run that RUU that you post will work? And after that i can flash any ROM that need 4.4.4?
Click to expand...
Click to collapse
What are you trying to do exactly? If your intent is to convert to WWE version, or run the phone on non-AT&T networks, that what you describe is probably right.
If you intend to just update firmware and run the phone on AT&T's network, I don't personally recommend the WWE firmware, as it has caused issues for a lot of folks on AT&T.
redpoint73 said:
What are you trying to do exactly? If your intent is to convert to WWE version, or run the phone on non-AT&T networks, that what you describe is probably right.
If you intend to just update firmware and run the phone on AT&T's network, I don't personally recommend the WWE firmware, as it has caused issues for a lot of folks on AT&T.
Click to expand...
Click to collapse
Thanks for answer! I Already use my phone on non-AT&T netwoorks, as i am from Brazil. I also planning flash Android Revolution or maybe SkyDragon, and both require 4.4.4.
guire01 said:
Thanks for answer! I Already use my phone on non-AT&T netwoorks, as i am from Brazil. I also planning flash Android Revolution or maybe SkyDragon, and both require 4.4.4.
Click to expand...
Click to collapse
You just need to update the firmware, not run the entire RUU. Instruction here: http://forum.xda-developers.com/showthread.php?t=2696282
RUU will do it too, but it seems a bit overkill for what you are trying to do.
redpoint73 said:
You just need to update the firmware, not run the entire RUU. Instruction here: http://forum.xda-developers.com/showthread.php?t=2696282
RUU will do it too, but it seems a bit overkill for what you are trying to do.
Click to expand...
Click to collapse
Ok, i'll update just the firmware, but everytime i read about i got lost... For this, do i need to change CID and MID on my phone? Or i can get any firmware and flash since i am with s-off?
Ive been trying to research how to update my bootloader version but i've been failing miserably. I currently have 3.16 and ive been trying to flash a few roms that wont let me since its too old. I'm rooted but i have s-on. Help?
Ever try just doing the OTA updates?
From where? I'm on ReNovate 4.5 and i dont see any options under settings.
alex5857 said:
From where? I'm on ReNovate 4.5 and i dont see any options under settings.
Click to expand...
Click to collapse
For official OTAs, you need to return to stock ROM and stock recovery. Then you should be able to update by OTA, which will also update hboot.
redpoint73 said:
For official OTAs, you need to return to stock ROM and stock recovery. Then you should be able to update by OTA, which will also update hboot.
Click to expand...
Click to collapse
So then i just need to download a stock rom from here and run the OTA? Would that come with the stock recovery? Is there a way to do it without having to do that?
Thanks for the help!
alex5857 said:
So then i just need to download a stock rom from here and run the OTA? Would that come with the stock recovery?
Click to expand...
Click to collapse
No, you need to flash the stock recovery seperately. Get your stock ROM and recovery for your CID at the following thread (includes detailed instructions):
http://forum.xda-developers.com/showthread.php?t=2701376
alex5857 said:
Is there a way to do it without having to do that?
Click to expand...
Click to collapse
Another way to run the OTAs? For the most part NO. The exception being some US variants, where you can relock the bootloader and update by RUU. Otherwise, for non-US versions:
You need the stock ROM, otherwise the OTA will fail when it sees the /system (ROM) files have been modified from "stock".
You need the stock recovery, since this is required to actually install the OTA. Without the stock recovery, the OTA will attempt to install, fail, and you will be stuck in a bootloop as the phone keeps trying to reboot into stock recovery.
Unless you mean, is there another way to update hboot. The only other way would be to s-off the device by sunshine.
Is it possible to have a working phone without a recovery installed ?
Unlocked bootloader, flashed twrp 3.0.1.0, phone wouldn't boot into recovery.
Relocked bootloader cause phone is s-on, ran 401 ruu but can't get into stock recovery but otherwise phone works ok
:banghead:
There is always a recovery installed. Either the stock one or the custom one. What does it do when you go to the recovery?
10rdan said:
Is it possible to have a working phone without a recovery installed ?
Unlocked bootloader, flashed twrp 3.0.1.0, phone wouldn't boot into recovery.
Relocked bootloader cause phone is s-on, ran 401 ruu but can't get into stock recovery but otherwise phone works ok
:banghead:
Click to expand...
Click to collapse
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
jollywhitefoot said:
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
Click to expand...
Click to collapse
With s-on you need to relock the bootloader to use official signed ruu files. When he flashed the ruu he could be seeing the exclamation mark that is normal as a warning before entering the stock recovery for which you need to push a volume and power button combo (don't know them heads up)
A possibility is to clear the cache and try to enter again (as this was a thingy on older HTC devices) or indeed as suggested at least to use the latest twrp available
Mr Hofs said:
With s-on you need to relock the bootloader to use official signed ruu files. When he flashed the ruu he could be seeing the exclamation mark that is normal as a warning before entering the stock recovery for which you need to push a volume and power button combo (don't know them heads up)
A possibility is to clear the cache and try to enter again (as this was a thingy on older HTC devices) or indeed as suggested at least to use the latest twrp available
Click to expand...
Click to collapse
It doesn't get as far as red exclamation mark, that's what I was waiting for. I'll try the newer version of twrp tomorrow after I've unlocked bootloader again. Do you think the same unlock code will work again?
10rdan said:
It doesn't get as far as red exclamation mark, that's what I was waiting for. I'll try the newer version of twrp tomorrow after I've unlocked bootloader again. Do you think the same unlock code will work again?
Click to expand...
Click to collapse
Yes i think it does work again. But that's a try and find out. There is always the possibility i could be wrong.
Edit :
This is why i love s-off....no more relocking / unlocking the BL with also an increased chance of bricks. The BL isn't made to be relocked and unlocked over and over.
Mr Hofs said:
With s-on you need to relock the bootloader to use official signed ruu files.
Click to expand...
Click to collapse
Sorry, but I believe this is misinformation, possibly residual to older HTC devices. I've heard this going back to the M7.
You need to be s-off to flash in download mode, but s-on can flash signed firmware and ruu's in RUU mode. I'm s-off so I can't test at the moment, but I'm about 99% that my information is correct.
S-on, you can only flash same or newer, though. You can't flash older firmware.
See post 19 here:
http://forum.xda-developers.com/htc-10/how-to/unlocked-official-ruu-t3378540/page2
I'm 100% that you can flash signed firmware package in ruu mode with bootloader unlocked and s-on.
jollywhitefoot said:
Sorry, but I believe this is misinformation, possibly residual to older HTC devices. I've heard this going back to the M7.
You need to be s-off to flash in download mode, but s-on can flash signed firmware and ruu's in RUU mode. I'm s-off so I can't test at the moment, but I'm about 99% that my information is correct.
S-on, you can only flash same or newer, though. You can't flash older firmware.
See post 19 here:
http://forum.xda-developers.com/htc-10/how-to/unlocked-official-ruu-t3378540/page2
I'm 100% that you can flash signed firmware package in ruu mode with bootloader unlocked and s-on.
Click to expand...
Click to collapse
That's new to me. Hopefully it isn't just tied to the developers edition then.
Thanks for the information
Mr Hofs said:
This is why i love s-off....no more relocking / unlocking the BL with also an increased chance of bricks. The BL isn't made to be relocked and unlocked over and over.
Click to expand...
Click to collapse
I'll bare that in mind, will unlock tomorrow again and try newer twrp. Only reason I relocked was to run ruu to get phone running again.
jollywhitefoot said:
Just fyi, but I'm pretty sure you can flash RUU in RUU mode with bootloader unlocked.
Phone works fine without recovery, but you can't take an ota, flash roms (custom recovery) or wipe data/cache.
I'd unlock again, and flash either stock recovery, run the RUU again, or flash TWRP 3.0.2-2. Why were you using such an old version in the first place? That's likely the cause of your issue in getting the phone to boot to TWRP.
Click to expand...
Click to collapse
Where can I find 3.0.2.2, can only see 3.0.2.0 on twrp site?
Cheers
Edit.... Found it. ?
@jollywhitefoot
I've got stock recovery back on phone. Can you think of any reason, other than old version, as to why twrp wouldn't boot after flashing it ?
Will try again tomorrow.
10rdan said:
@jollywhitefoot
I've got stock recovery back on phone. Can you think of any reason, other than old version, as to why twrp wouldn't boot after flashing it ?
Will try again tomorrow.
Click to expand...
Click to collapse
I'm not exactly sure, but up until 3.0.2.2 Captain Throwback didn't even have the device and was working blind. I know he was trying different things to make it compatible with different variants, too, so in my mind that was a test build. I'm not sure why they have it on the downloads page. For me, I always download it from the download section of the twrp thread.