Develop Bugs

PRI Checksum 00000000

I went ##786# then PRI cheksum and i got 00000000 . I s any thing wrong with it?
I unroot to stock rom 132.651.1 then i did automatically download with 3G up to 147.651.1. My PRI still in 134.003 and doesnt change to 140.003
Anyway to fix that to get 140.003 and 00000 checksum is normal?

cocobongo77 said:
I went ##786# then PRI cheksum and i got 00000000 . I s any thing wrong with it?
I unroot to stock rom 132.651.1 then i did automatically download with 3G up to 147.651.1. My PRI still in 134.003 and doesnt change to 140.003
Anyway to fix that to get 140.003 and 00000 checksum is normal?
Click to expand...
Click to collapse
once you've rooted your phone, the PRI will be 134.xxx the stock one is 140.xxx

campchi said:
once you've rooted your phone, the PRI will be 134.xxx the stock one is 140.xxx
Click to expand...
Click to collapse
I unrooted my phone to factory stock 132.651.1 and automatically download by 3G up to 147.651.1 and still in 134.003 doesnt change to 1.40
If the phone do automatically download by 3g , obviously is unrooted.

cocobongo77 said:
I unrooted my phone to factory stock 132.651.1 and automatically download by 3G up to 147.651.1 and still in 134.003 doesnt change to 1.40
If the phone do automatically download by 3g , obviously is unrooted.
Click to expand...
Click to collapse
this has been covered numerous times. It appears that if you have rooted in the past, you can not ever get pri 1.40 even if you go back to unrooted shipped rom which you did. I would be curious to know if anyone has started with the first shipped rom (RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_rele ase_171253.exe), unrooting their device, then instead of accepting the ota, flashed the second shipped rom (RUU_Supersonic_1.32.651.6_Radio_1.39.00.05.31_rele ase_171253_signed.exe) to see if anything would change, then flashed the 3rd and most up to date shipped (RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_rele ase_CL195459.exe). I bet its been done already but figured I would ask.

rileyd5 said:
this has been covered numerous times. It appears that if you have rooted in the past, you can not ever get pri 1.40 even if you go back to unrooted shipped rom which you did. I would be curious to know if anyone has started with the first shipped rom (RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_rele ase_171253.exe), unrooting their device, then instead of accepting the ota, flashed the second shipped rom (RUU_Supersonic_1.32.651.6_Radio_1.39.00.05.31_rele ase_171253_signed.exe) to see if anything would change, then flashed the 3rd and most up to date shipped (RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_rele ase_CL195459.exe). I bet its been done already but figured I would ask.
Click to expand...
Click to collapse
I called Sprint and explain the situation, and they give me with them a hard full reset by AIR as new and reactivate the phone and nothing. They told me go tomorow to a store tecnician and they do by wires. I dont think will be a fix, wil be same issue
I gonna do is flash the seccond 132.651.6 manually then the third one if it fixe it as you said, Let you know

cocobongo77 said:
I called Sprint and explain the situation, and they give me with them a hard full reset by AIR as new and reactivate the phone and nothing. They told me go tomorow to a store tecnician and they do by wires. I dont think will be a fix, wil be same issue
I gonna do is flash the seccond 132.651.6 manually then the third one if it fixe it as you said, Let you know
Click to expand...
Click to collapse
thanks for doing this. I guess we will see if what happens.

rileyd5 said:
thanks for doing this. I guess we will see if what happens.
Click to expand...
Click to collapse
Dammm, still same 134.003

cocobongo77 said:
Dammm, still same 134.003
Click to expand...
Click to collapse
crap... how are you flashing the shipped roms if you dont mind me asking. just running the ruu.exe? or some other method. thanks for trying man!

rileyd5 said:
crap... how are you flashing the shipped roms if you dont mind me asking. just running the ruu.exe? or some other method. thanks for trying man!
Click to expand...
Click to collapse
First i went to the bootloader page then fastboot 2) connect the usb cable 3) press fastboot until show up fastboot usb and then run the RUU.exe
Other option is using ht sync until connect then run the RUU.exe

evo4
any fix for this i have same problem

badboy22 said:
any fix for this i have same problem
Click to expand...
Click to collapse
Why not just flash 1.77 zip? It is located on the development forums.

My EVO checksum is 00000000 and it's now updated to V1.90_03.
Is this okay?
Thanks!

Help please flashing to boost

Ok, Im trying to flashing my EVo 4G to boost mobile. Im following the guide that eljean posted. I got all the way up to step 5 on the guide and got stuck. Heres how im stuck it says to download autoroot w/2.15.00.11.19 which i did then it say make sure you have a sd card in your evo which I do. then it say to duble click autoroot.bat and i do... it starts and this is where i get stuck it look like it start rooting then it say the ADB shell does not heve root permissioms and then it say FAILED TO GET A ROOT SHELL PLEASE RESTART YOUR PHONE AND TRY AGAIN. can somebody plz help me it making me a very angry person

can someone help pleaseee

aldog25 said:
Ok, Im trying to flashing my EVo 4G to boost mobile. Im following the guide that eljean posted. I got all the way up to step 5 on the guide and got stuck. Heres how im stuck it says to download autoroot w/2.15.00.11.19 which i did then it say make sure you have a sd card in your evo which I do. then it say to duble click autoroot.bat and i do... it starts and this is where i get stuck it look like it start rooting then it say the ADB shell does not heve root permissioms and then it say FAILED TO GET A ROOT SHELL PLEASE RESTART YOUR PHONE AND TRY AGAIN. can somebody plz help me it making me a very angry person
Click to expand...
Click to collapse
so you're trying to root? go here http://forum.xda-developers.com/showthread.php?t=1218386
..then go back to the original guide to complete

I did that i redownloaded all the auto root files and still when i go to autoroot.bat it still say the same thing does any of this matter? Im running Android ver: 2.3.3
Baseband ver: 2.15.00.05.02
Build number: 4.24.651 L61076 release keys
Software number : 4.4.651.1
PRI ver:1.77_003
On that guide i think it say it only work for Software versions 1.32, 1.36, 3.29, 3.30 & 3.70 and hBoot Version .76, .93, .97, 2.02 & 2.10 and how do i even find out my hoot version?

I just tried the autoroot quick method and it said unknown bootloader version. Bootloader is the wrong version. Is there anyway i can change my bootloader version?

aldog25 said:
I just tried the autoroot quick method and it said unknown bootloader version. Bootloader is the wrong version. Is there anyway i can change my bootloader version?
Click to expand...
Click to collapse
Don't use autoroot, click the link i posted...use "revolutionary" Not autoroot
follow the link i posted line by line !!
NO AUTOROOT !

Thanks alot i got pass that step now lol im stuck one more time. Ok I found 9 msid's and zerod them and i found 11 esn's before i got done checking all the esn locations i had about 5 or 6 locations left to check but i didnt becouse it say theres only 9 meids and 11 esns, and now after i zero them all out and reboot my phone and press ##786# the msid and esn is not all zeros like it should say. What do i do now?

Hey louforgiveno do you have a messenger aol msn yahoo or anything if so leave your screen name and log on i be on asap thanks

I just downgraded to 2.05.00.06.10 and used the revskills to try and zero meid/esn i ended up with a log file how do i write this to QXDM now?

i must be missing something cause everywhere i see it no one replies to this question or there is no answer...
after removing 0 and 1943, i can't ever commit the **** to the DIAG TX item... the DIAG RX item takes it just fine. I have been trying and re-trying for hours... thanks

You need the version of qpst listed In the guide....double check your version

I used the EFS Explorer to add and extract the files. Edit of course with Winhex. I bet the file is not saved properly if you've done this already.

louforgiveno said:
You need the version of qpst listed In the guide....double check your version
Click to expand...
Click to collapse
I have 2.7 v366, one guide didn't have a number beyond 2.7, another guide lists v355...
Dean_L said:
I used the EFS Explorer to add and extract the files. Edit of course with Winhex. I bet the file is not saved properly if you've done this already.
Click to expand...
Click to collapse
Makes sense. when you drag files back do they have the same look as the ones already in there? What i do notice is that all the other files have a consistent modified date, and there is also a batch of files that show mod dates that are more recent and don't have the red line through them (they look like txt file images on a windows pc). are these temp files that are perhaps messing with writing the ****?

woodz93 said:
I have 2.7 v366, one guide didn't have a number beyond 2.7, another guide lists v355...
Makes sense. when you drag files back do they have the same look as the ones already in there? What i do notice is that all the other files have a consistent modified date, and there is also a batch of files that show mod dates that are more recent and don't have the red line through them (they look like txt file images on a windows pc). are these temp files that are perhaps messing with writing the ****?
Click to expand...
Click to collapse
It's normal that they look different, don't know if you tried it yet, but you need to delete the 0&1943 from the phone before copying them back from pc.

louforgiveno said:
It's normal that they look different, don't know if you tried it yet, but you need to delete the 0&1943 from the phone before copying them back from pc.
Click to expand...
Click to collapse
i do delete them. but i also see a host of other files that are written on boot(or reboot), those are the ones i'm curious about. i also will downgrade qpst to 2.7.555 to see if that matters.
EDIT: Tried it to no avail. so infuriating... so close but so far...
EDIT: thanks to Klown80 - simple answer is it doesn't matter! there is a guide floating around that says it does, i just happened to end up with it. thinking that it was logical i wasn't going to deviate until i got it right... so unnecessary. so there it is, for those of you who are stumped by this issue...

[Q] Baseband Unknown, Signal Drops

Hi, i'm from Brazil and i have a Gnex from UK, and it's unlocked.
When i was at 4.0.2, everythings ok, but after the OTA update to 4.0.4, i'm having some problems if the data is turned on, and the option 'only 2g' is checked the signal is good, but if the data is turned on and i have 3G connection the phone lose signal, and baseband shows Unknown.
My Gnex is Yakju, and i have flashed the 4.1 (JRN84D) from here with baseband I9250XXLF1 and 3.0.31-ge8de0e2 kernel ( on the post shows that's a stock kernel ). And the problems still here.
More info about my Gnex on fastboot mode:
Product Name: Tuna
Variant: Maguro
HW Version: 9
BootLoader: PRIMEKK15
Baseband: I9250XXLF1
Sorry for my bad english, but i can't use 3G connection and i need to recive emails, etc
If anyone can help me, thanks! :laugh:

andieknoxville said:
Hi, i'm from Brazil and i have a Gnex from UK, and it's unlocked.
When i was at 4.0.2, everythings ok, but after the OTA update to 4.0.4, i'm having some problems if the data is turned on, and the option 'only 2g' is checked the signal is good, but if the data is turned on and i have 3G connection the phone lose signal, and baseband shows Unknown.
My Gnex is Yakju, and i have flashed the 4.1 (JRN84D) from here with baseband I9250XXLF1 and 3.0.31-ge8de0e2 kernel ( on the post shows that's a stock kernel ). And the problems still here.
More info about my Gnex on fastboot mode:
Product Name: Tuna
Variant: Maguro
HW Version: 9
BootLoader: PRIMEKK15
Baseband: I9250XXLF1
Sorry for my bad english, but i can't use 3G connection and i need to recive emails, etc
If anyone can help me, thanks! :laugh:
Click to expand...
Click to collapse
I'm not 100% sure but I think your kernel maybe be the Developer preview kernel, the official is 3.0.31-g6fb96c9, you could try flashing that? It's what I'm running with 4.1.1 and it works fine.

andieknoxville said:
Hi, i'm from Brazil and i have a Gnex from UK, and it's unlocked.
When i was at 4.0.2, everythings ok, but after the OTA update to 4.0.4, i'm having some problems if the data is turned on, and the option 'only 2g' is checked the signal is good, but if the data is turned on and i have 3G connection the phone lose signal, and baseband shows Unknown.
My Gnex is Yakju, and i have flashed the 4.1 (JRN84D) from here with baseband I9250XXLF1 and 3.0.31-ge8de0e2 kernel ( on the post shows that's a stock kernel ). And the problems still here.
More info about my Gnex on fastboot mode:
Product Name: Tuna
Variant: Maguro
HW Version: 9
BootLoader: PRIMEKK15
Baseband: I9250XXLF1
Sorry for my bad english, but i can't use 3G connection and i need to recive emails, etc
If anyone can help me, thanks! :laugh:
Click to expand...
Click to collapse
Can you still txt/call while the signal is dropped??

Sgtpanda said:
I'm not 100% sure but I think your kernel maybe be the Developer preview kernel, the official is 3.0.31-g6fb96c9, you could try flashing that? It's what I'm running with 4.1.1 and it works fine.
Click to expand...
Click to collapse
The 4.1.1 is available from OTA, but when i press to install the phone reboot then enter in CWM and shows a message that de update was found, try install but give me a erro message that failed, i'm a new user on android, my phone was an iPhone.
Thanks for help

kyokeun1234 said:
Can you still txt/call while the signal is dropped??
Click to expand...
Click to collapse
No, when de signal is dropped i had to take battery out from phone, wait 5 or more minutes than put it back! If i put it back before i have the baseband unknown message on Config > About Phone. And this happens only if i have 3G signal, i see many people saying about signal issues after OTA to 4.0.4 and if i still with "only 2g" selected i don't have signal drop or disable the data, then i don't have any problem
Thanks for help

andieknoxville said:
The 4.1.1 is available from OTA, but when i press to install the phone reboot then enter in CWM and shows a message that de update was found, try install but give me a erro message that failed, i'm a new user on android, my phone was an iPhone.
Thanks for help
Click to expand...
Click to collapse
If it's the status 7 error it's because OTA's require stock everything I think, including recovery.

Sgtpanda said:
If it's the status 7 error it's because OTA's require stock everything I think, including recovery.
Click to expand...
Click to collapse
How i do that? A update can resolve this problems?
Thanks

andieknoxville said:
How i do that? A update can resolve this problems?
Thanks
Click to expand...
Click to collapse
Not sure if it will fix the problem, I think it's in the kernel you have as that's where WIFI is managed, however you could try and if that doesn't work change the kernel.
Instructions on how to update to official 4.1 are here however if you want to then accept the OTA afterwards when following Method 1 do not delete/rename /system/etc/install-recovery.sh and CWM will be overwritten by stock and you should be able to accept OTA's.
Note: If you don't want to lose your data then you could try skipping the "Wipe data/factory reset" step but do that at your own risk, I skipped it and it works fine though.

Sgtpanda said:
Not sure if it will fix the problem, I think it's in the kernel you have as that's where WIFI is managed, however you could try and if that doesn't work change the kernel.
Instructions on how to update to official 4.1 are here however if you want to then accept the OTA afterwards when following Method 1 do not delete/rename /system/etc/install-recovery.sh and CWM will be overwritten by stock and you should be able to accept OTA's.
Note: If you don't want to lose your data then you could try skipping the "Wipe data/factory reset" step but do that at your own risk, I skipped it and it works fine though.
Click to expand...
Click to collapse
i will try OTA's, if dosen't fix what do you think about FuguMod kernel ?
Thanks for help

someone? a little information, when i have this problem the option to turn off the data disappear, than i have to take out battery wait five or more to get signal again

is problem hardware pba (modem)
http://forum.xda-developers.com/showthread.php?t=1626593&page=5

a "different" kinda phone problem(?)
I looked through most all of these forums and couldnt find anyone with the problem im having. Not sure if it's me or what...
My problem is that when I flash some roms, my phone doesnt work. (yes im on sprint and only using toroplus). Well, yesterday, for most of the day, everything on my phone worked. When I got up this morning, It hadnt charged, and I lost my dialing again. Some ROMs I flash start off. When I go to settings> about phone> status under "Network" it says "unknown" and under "service state" It will say "no service" then checking on "Moblle Network State" It'll say "unknown"", sometimes my phone number shows up, sometimes it doesnt, Most times I cant make outgoing calls and when anyone calls me, it does a half ring and directs my callers straight to my voice mail. Is anyone having this problem too? And if so, how did you fix it? It frustrates the hell outta me and I think I should just go back to ICS although I dont want to. HELLP!!! :-/
Thanks,
Ridge

P.S. I forgot to mention that Im on a Sprint phone and that Im running Houng81's AOKP Aug1 version Baseband: fg01, the kernel that came with the ROM, Ive even replaced them a few times and nothing does any better. Forgot to add this to my prior text LOL sorry, that just gave me away as a n00b huh? HEHE
Ridge

andieknoxville said:
i will try OTA's, if dosen't fix what do you think about FuguMod kernel ?
Thanks for help
Click to expand...
Click to collapse
It's a great kernel.
andieknoxville said:
someone? a little information, when i have this problem the option to turn off the data disappear, than i have to take out battery wait five or more to get signal again
Click to expand...
Click to collapse
Doing the OTA might solve it since it will update (i think) your bootloader to lc03, you still on kk15. If it doesnt, use fastboot and update manually. To run an OTA with cwm installed, you need to download the update.zip from dev section for the OTA you want to run, but do it through cwm (like flashing a custom rom).
Sent from my tf201

bk201doesntexist said:
It's a great kernel.
Doing the OTA might solve it since it will update (i think) your bootloader to lc03, you still on kk15. If it doesnt, use fastboot and update manually. To run an OTA with cwm installed, you need to download the update.zip from dev section for the OTA you want to run, but do it through cwm (like flashing a custom rom).
Sent from my tf201
Click to expand...
Click to collapse
I read in another forum that the "factory" folder is the efs on the Gnex, and maybe my phone was with this folder corrupt, if i get a backup of another Gnex thats everything is working and restore to my Gnex will be resolve the problem?

TheRidge69 said:
I looked through most all of these forums and couldnt find anyone with the problem im having. Not sure if it's me or what...
My problem is that when I flash some roms, my phone doesnt work. (yes im on sprint and only using toroplus). Well, yesterday, for most of the day, everything on my phone worked. When I got up this morning, It hadnt charged, and I lost my dialing again. Some ROMs I flash start off. When I go to settings> about phone> status under "Network" it says "unknown" and under "service state" It will say "no service" then checking on "Moblle Network State" It'll say "unknown"", sometimes my phone number shows up, sometimes it doesnt, Most times I cant make outgoing calls and when anyone calls me, it does a half ring and directs my callers straight to my voice mail. Is anyone having this problem too? And if so, how did you fix it? It frustrates the hell outta me and I think I should just go back to ICS although I dont want to. HELLP!!! :-/
Thanks,
Ridge
Click to expand...
Click to collapse
Well i'm from brazil, and i have a question, sprint is CDMA? If the answer it's YES, do you flash a CDMA rom? if you flash a GSM rom it doesn't work

bk201doesntexist said:
It's a great kernel.
Doing the OTA might solve it since it will update (i think) your bootloader to lc03, you still on kk15. If it doesnt, use fastboot and update manually. To run an OTA with cwm installed, you need to download the update.zip from dev section for the OTA you want to run, but do it through cwm (like flashing a custom rom).
Sent from my tf201
Click to expand...
Click to collapse
Thanks for this post. I bought my mom a sprint gnex for mothers day, and sprint is pushing a 26mb ota. I put TWRP on her phone and rooted. Do I need the stock recovery to do the update, does the update break root?
Sorry, not familiar with Sammy or nexus devices, I've always used HTC. And the nexus forums are kinda hard to navigate because of the way it's split up.
Much thanks to anyone.
Sent from my EVO using xda premium
---------- Post added at 12:26 AM ---------- Previous post was at 12:25 AM ----------
andieknoxville said:
Well i'm from brazil, and i have a question, sprint is CDMA? If the answer it's YES, do you flash a CDMA rom? if you flash a GSM rom it doesn't work
Click to expand...
Click to collapse
Do not flash a GSM ROM on a CDMA device/radio.
Sent from my EVO using xda premium

I had update manually to 4.1.1 factory image, the bootloader has been updated, and the problem still here, maybe this is an efs folder corrupted?
If i get a backup from a gnex that all is working and restore will be fix ?
Thanks

???

[Q] Unlocked Sprint update

Hello everyone!
I would greatly appreciate if someone could show the right way to get my phone fully functional;
SPRINT HTC ONE M8
GSM SIM UNLOCKED for use on GSM networks
S-OFF
Rooted
TWRP
HBOOT 3.18.0.0000
RADIO 1.08.20.0612_4
CID-11111111
software version: 2.16.654.4
android: 4.4.3.
Issue:
1. I can not install any OTA updates, and the notification keeps popping out.
2. Mobile data is just not working properly even though I did everything as said here;
http://forum.xda-developers.com/sprint-htc-one-m8/general/enabling-3g-umts-countries-t2847461
As I did my research, it was some kind of a major bug on this series of Sprint M8 phones with breakdowns in mobile data. However, since I can not get any updates, the problem perists.
I tried installing custom ROM's, but so far ARHD 22 didn't even boot and LiquidSmooth couldn't detect the SIM card at all.
I know there are quite a few tutorials and "how-to" threads explaining all you need to know about RUU, cusotm ROM's, etc. However if someone could tell me what exactly to do and in which order (return to stock, then update?) I would greatly appreciate it.
Many many thanks!

domt91 said:
Hello everyone!
I would greatly appreciate if someone could show the right way to get my phone fully functional;
SPRINT HTC ONE M8
GSM SIM UNLOCKED for use on GSM networks
S-OFF
Rooted
TWRP
HBOOT 3.18.0.0000
RADIO 1.08.20.0612_4
CID-11111111
software version: 2.16.654.4
android: 4.4.3.
Issue:
1. I can not install any OTA updates, and the notification keeps popping out.
2. Mobile data is just not working properly even though I did everything as said here;
http://forum.xda-developers.com/sprint-htc-one-m8/general/enabling-3g-umts-countries-t2847461
As I did my research, it was some kind of a major bug on this series of Sprint M8 phones with breakdowns in mobile data. However, since I can not get any updates, the problem perists.
I tried installing custom ROM's, but so far ARHD 22 didn't even boot and LiquidSmooth couldn't detect the SIM card at all.
I know there are quite a few tutorials and "how-to" threads explaining all you need to know about RUU, cusotm ROM's, etc. However if someone could tell me what exactly to do and in which order (return to stock, then update?) I would greatly appreciate it.
Many many thanks!
Click to expand...
Click to collapse
You need a stock recovery to flash the OTA.

domt91 said:
Hello everyone!
I would greatly appreciate if someone could show the right way to get my phone fully functional;
SPRINT HTC ONE M8
GSM SIM UNLOCKED for use on GSM networks
S-OFF
Rooted
TWRP
HBOOT 3.18.0.0000
RADIO 1.08.20.0612_4
CID-11111111
software version: 2.16.654.4
android: 4.4.3.
Issue:
1. I can not install any OTA updates, and the notification keeps popping out.
2. Mobile data is just not working properly even though I did everything as said here;
http://forum.xda-developers.com/sprint-htc-one-m8/general/enabling-3g-umts-countries-t2847461
As I did my research, it was some kind of a major bug on this series of Sprint M8 phones with breakdowns in mobile data. However, since I can not get any updates, the problem perists.
I tried installing custom ROM's, but so far ARHD 22 didn't even boot and LiquidSmooth couldn't detect the SIM card at all.
I know there are quite a few tutorials and "how-to" threads explaining all you need to know about RUU, cusotm ROM's, etc. However if someone could tell me what exactly to do and in which order (return to stock, then update?) I would greatly appreciate it.
Many many thanks!
Click to expand...
Click to collapse
Easiest way to get it back to stock is just flash the Sprint H/K RUU. You can download it from HERE. Just run it and connect your phone when prompted and follow the instructions (I'd probably change your CID back to the Sprint one first to be on the safe side but as you're S-OFF it shouldn't be needed). You might also need HTC Sync Manager installed. If so, you can get it HERE
This process will wipe the phone completely so back up any data first but other than that you'll at least be back to stock and then troubleshoot any issues from there

Thanks
Many thanks to everyone.
Any chances of loosing the SIM UNLOCK when going back to stock completely?

Nope, that shouldn't be touched but as I've not had a SIM-locked device in years I can't say for certain

EddyOS said:
Nope, that shouldn't be touched but as I've not had a SIM-locked device in years I can't say for certain
Click to expand...
Click to collapse
OK, many thanks!

:good:

domt91 said:
:good:
Click to expand...
Click to collapse
Mine did the same this morning just flash twrp recovery and boot into it and you should be fine I don't know why it did this since I'm used to it popping up with a screen asking if I want to unlock boot loader but if it told you it was good then push twrp and you're good

tjeeeeee said:
Mine did the same this morning just flash twrp recovery and boot into it and you should be fine I don't know why it did this since I'm used to it popping up with a screen asking if I want to unlock boot loader but if it told you it was good then push twrp and you're good
Click to expand...
Click to collapse
Yeah, I just did that, no problems at all.
Tried to delete the previous post, but you got ahead of me
Let's see if I can get the mobile data to work without flaws.

domt91 said:
Yeah, I just did that, no problems at all.
Tried to delete the previous post, but you got ahead of me
Let's see if I can get the mobile data to work without flaws.
Click to expand...
Click to collapse
Are you trying to run any specific roms? I know with Sprint it's a bit limited

tjeeeeee said:
Are you trying to run any specific roms? I know with Sprint it's a bit limited
Click to expand...
Click to collapse
I want to try ARHD v22

domt91 said:
I want to try ARHD v22
Click to expand...
Click to collapse
Why not 34? Lol Sprint is up to date on its software you could just update to the lollipop firmware, and I could pull some of the files I've got to see if I can help you get it running, I'm on Leedroid right now so the process should be the same for ARHD.

tjeeeeee said:
Why not 34? Lol Sprint is up to date on its software you could just update to the lollipop firmware, and I could pull some of the files I've got to see if I can help you get it running, I'm on Leedroid right now so the process should be the same for ARHD.
Click to expand...
Click to collapse
Sorry if some of my questions are a bit dum, I just got from a long trip and have been out of this all rooting busines for a while...
Do i need to install a new stock firmware from Sprint with Lolipop to get the 34 runing?
I have been told v34 won't be working with this software I have right now on the phone.

domt91 said:
Sorry if some of my questions are a bit dum, I just got from a long trip and have been out of this all rooting busines for a while...
Do i need to install a new stock firmware from Sprint with Lolipop to get the 34 runing?
I have been told v34 won't be working with this software I have right now on the phone.
Click to expand...
Click to collapse
You can or you can go to the Sprint android development and flash the updated recovery since you are s-off and it'll permit you to flash lollipop roms without many issues but there is still the files that need to be modified for ARHD to work correctly like the boot.img and a few others.

tjeeeeee said:
You can or you can go to the Sprint android development and flash the updated recovery since you are s-off and it'll permit you to flash lollipop roms without many issues but there is still the files that need to be modified for ARHD to work correctly like the boot.img and a few others.
Click to expand...
Click to collapse
I just installed ARHD, everything went well and when it rebooted, the phone won't turn on... just black screen.
Any ideas??

domt91 said:
I just installed ARHD, everything went well and when it rebooted, the phone won't turn on... just black screen.
Any ideas??
Click to expand...
Click to collapse
Power+vol up for about 15 seconds then power+vol down to get into recovery. You cant flash it unless you swap out Sprint specific files otherwise you'll get what just happened or boot directly into boot loader.
Like I mentioned I can pull the files together and see if I can get it working for Sprint tonight when I get home but until then flash either fluent Rom or stock if you want lollipop or just flash bad boyz if you don't mind kitkat

tjeeeeee said:
Power+vol up for about 15 seconds then power+vol down to get into recovery. You cant flash it unless you swap out Sprint specific files otherwise you'll get what just happened or boot directly into boot loader.
Like I mentioned I can pull the files together and see if I can get it working for Sprint tonight when I get home but until then flash either fluent Rom or stock if you want lollipop or just flash bad boyz if you don't mind kitkat
Click to expand...
Click to collapse
I will go with installation of
Sprint_HTC_One_M8_non-HK_4.20.651.2_RUU
Sounds good?

domt91 said:
I will go with installation of
Sprint_HTC_One_M8_non-HK_4.20.651.2_RUU
Sounds good?
Click to expand...
Click to collapse
Yes and ill put the Sprint ARHD together tonight and test

tjeeeeee said:
Yes and ill put the Sprint ARHD together tonight and test
Click to expand...
Click to collapse
Many thanks!
For me, the biggest issue is the mobile data breakdowns... I know I read somewhere a while ago it was an issue with some Sprint M8 models. I would like to get everything working w/o problems since it is GSM unlocked, and via QPST I unlocked all the bands.

domt91 said:
Many thanks!
For me, the biggest issue is the mobile data breakdowns... I know I read somewhere a while ago it was an issue with some Sprint M8 models. I would like to get everything working w/o problems since it is GSM unlocked, and via QPST I unlocked all the bands.
Click to expand...
Click to collapse
Also, I just found some official EU RUU's with different radio's as far as I can tell from the filename.
Maybe that could be the final solution to all the problems?

help with "imei, baseband, ect 'unknown'"

old m9 ended up kicking the bucket sorta (usb died, so no way to charge the phone) so i bought a used one from swappa. it came with the latest ruu flashed, but i decided to reflash again to make sure it was totally clean (RUU_HIMA_UL_M60_SENSE70_ATT_MR_Cingular_US_3.38.502.12.exe). it went fine and so i began the process of unlocking it and flashing recovery (twrp 3.0.2.0) and flashing a rom (arhd 20 which is marshmallow) and titanium backuping back into shape. it unlocked and flashed recovery fine, however when i flashed the rom and did the first boot, i noticed i had no signal even though the stock rom had 4 bars of lte. it was also very laggy and had issues with crashing apps and for some reason still had at&t bloatware even though i did a dalvik/cache/system/data wipe beforehand and then a data wipe during the install and was missing inbuilt htc apps like internet. in the settings it shows that the imei, baseband, and other things related are all "unknown". i researched and came across a fix where you flash back your stock boot image, and it worked, except it would fail to boot after the first reboot. so that was useless.
i decided to try flashing arhd 14 (lollipop) because its what my old m9 had since forever and never gave me an issue. surprisingly, it actually installed and ran just fine even though the phone is on marshmallow firmware, as well as much quicker and smoother than arhd 20. however, i have the same issue. no signal, and imei and stuff "unknown". it does show my imei in download mode so i know the phone itself didnt forget it somehow. i have no idea what is going on here because ive literally never had this problem with any phone, even with my old m9 and i absolutely refuse to use a stock rom and have to manually deal with all of the bloatware especially with selinux making anything remotely "dangerous" an excessive hassle. can someone help me figure out this unnecessary pita?
this is what is shown in the download mode screen:
*** UNLOCKED ***
HTC_HIMAULATT PVT S-ON
LK-1.0.0.0000
RADIO-01.01_U11440801_96.01.51207A_F
OPENDSP-15.6.1.00522.8994_1026
OS-3.38.502.12

Did You Get Any Solutions ? :crying:

nope.

daktah said:
nope.
Click to expand...
Click to collapse
Can you please give me the link of stock img which helped you to get signal at first boot ? i am running on viper marshmallow rom.advance thanks to you
---------- Post added at 12:57 AM ---------- Previous post was at 12:55 AM ----------
and yes exact same problem is also happening with me It shows imei in fastboot,but In the settings and phone info,Imei shows unknown and no cell signals .I Just Bought THe phone 2 Days ago Happened after flashing the Ar Hd Rom

i used the boot from the nandroid i made of the stock ruu image before i tried to install arhd

I know I sound stupid, but actually I did'nt take any backup before flashing would you please upload it to somewhere and give me a link. It would mean a lot to me, thanks

daktah said:
i used the boot from the nandroid i made of the stock ruu image before i tried to install arhd
Click to expand...
Click to collapse
Are you S-OFF? if so, are you sure that you used the correct firmware. Never had this issue myself, but am remembering from the days on the M9 that such an issue could occur if a wrong firmware is flashed.
Another chance could be the following one: if your RUU didn't download correctly it might be damaged and thus have caused the problem. This may be the case as you're missing stock Apps after flash. Have you checked if the md5 of the downloaded file is correct.
Edit: report back if it helped.
Sent from my htc_pmeuhl using XDA Labs

5m4r7ph0n36uru said:
Are you S-OFF? if so, are you sure that you used the correct firmware. Never had this issue myself, but am remembering from the days on the M9 that such an issue could occur if a wrong firmware is flashed.
Another chance could be the following one: if your RUU didn't download correctly it might be damaged and thus have caused the problem. This may be the case as you're missing stock Apps after flash. Have you checked if the md5 of the downloaded file is correct.
Edit: report back if it helped.
Sent from my htc_pmeuhl using XDA Labs
Click to expand...
Click to collapse
Yeah turns out the latest arhd is made for 3.35 and I'm on 3.38, so that's why it's all jacked up. And of course there is no way to "downgrade" (see: upgrade) to a lower firmware without $25 s off. Pretty ridiculous I have to pay just to s off so I can put my phone on an older software that works better because of "security" (see: money).

daktah said:
Yeah turns out the latest arhd is made for 3.35 and I'm on 3.38, so that's why it's all jacked up. And of course there is no way to "downgrade" (see: upgrade) to a lower firmware without $25 s off. Pretty ridiculous I have to pay just to s off so I can put my phone on an older software that works better because of "security" (see: money).
Click to expand...
Click to collapse
I still think something went wrong when flashing RUU. A 3.35 based ROM shouldn't jack up anything, as long as your firmware is even a later one than the ROM base. Btw 25 bucks are well invested regarding all the work they do, but it's the wrong place to discuss. Did you check if the RUU downloaded correctly and the md5 after download still is the same as given in the dl link. Missing stock Apps after flashing an RUU are a major indicator for a bad download, and if firmware parts where missing in this download as well, you'll end up just as you'd described in your opening post.
Sent from my htc_pmeuhl using XDA Labs

I used the ruu 2 or 3 times and it worked fine every time and the stock rom runs just fine. It's when trying to flash the rom it doesn't work, and I used one I downloaded from my computer, from my phone, and one I already had on my SD and they all ended up with the same result.

5m4r7ph0n36uru said:
A 3.35 based ROM shouldn't jack up anything, as long as your firmware is even a later one than the ROM base.
Click to expand...
Click to collapse
It actually does. That's why thicklizard made his custom kernel. The 3.3x firmware versions for SKUs which skipped the 3.35 version are not compatible with 3.35 roms unless that kernel gets flashed.
Edit: I just read that the mono-revisited kernel is only for AOSP roms. I'm sorry but it seems like I don't have a solution for sense roms.
5m4r7ph0n36uru said:
Missing stock Apps after flashing an RUU are a major indicator for a bad download, and if firmware parts where missing in this download as well, you'll end up just as you'd described in your opening post.
Click to expand...
Click to collapse
Doesn't daktah say in the OP that he was missing those apps after flashing ARHD20? I never used that rom but it sounds like they got uninstalled during the installation. Does ARHD have an aroma installer like the Viper rom does where you can select which apps to install or not to install?
Sent from my HTC One S using XDA Labs

Flippy498 said:
Doesn't daktah say in the OP that he was missing those apps after flashing ARHD20? I never used that rom but it sounds like they got uninstalled during the installation. Does ARHD have an aroma installer like the Viper rom does where you can select which apps to install or not to install?
Click to expand...
Click to collapse
Thanks for the clarification mate.
Didn't remember this one.. guess it's already to long since I used my M9. I'm not sure if he tried to state exactly what I quoted from your post, cause he jumps from RUUing right to the flash of ARHD. never used it myself, this I don't know if it comes with an Aroma Installer at all. Either way it would be interesting to know what happens if he just boots into his stock ROM, to make sure the cause isn't a bad download of the RUU. Feel free to correct me if I'm mistaken
Sent from my htc_pmeuhl using XDA Labs

In theory you're right but I guess we both missed the post located directly above mine.
Sent from my HTC One S using XDA Labs

We did indeed. Blind I've become, as Yoda would state now.
Sent from my htc_pmeuhl using XDA Labs

So I managed to fix it... By replacing the USB/aux board in my phone. Only cost 10 bucks for a new one . However now i have a problem where my phone will not charge at full speed and will actually give me the "using too much power to charge" message when doing a titanium backup even on the stock charger. The battery was at dead flat 0 for like 5 days before I fixed it, so do I need to replace it or is there something else I can do to fix it? When it's full it holds a charge for as long as it did before, just charging is not working correctly it seems.

i have nandroid backup of 3.38.841.6 let me know if i can be any help, i"ll upload it on mediafire and give you link,
btw i had the same problem yesterday, i flashed my nandroid backup and things went smooth

i got no imei no network after flash AEHD20, so i flash back boot img from backup, everything fine but without root. i down load twrp backup from http://forum.xda-developers.com/one-m9/general/stock-nand-backup-ota-update-collection-t3132698, select the correct CID match your phone. my CID is HTC__044 with 3.42.708.3. After download backup unzip the file, done once backup boot file, copy the file from download overwrite your backup, then restore the file from backup. good luck. don't wipe!!!!!!
17/09/16
I install Viber one still no imei, restore back up boot, imei back but no root, install super su 2.65 everything fine got root and imei.
Install twrp 2.8.5.0 first then update to twrp 3.0.2.0

Hey arcslt18,
arcslt18 said:
i have nandroid backup of 3.38.841.6 let me know if i can be any help, i"ll upload it on mediafire and give you link,
btw i had the same problem yesterday, i flashed my nandroid backup and things went smooth
Click to expand...
Click to collapse
Do you still have that nandroid backup handy?

I think i do, Currently at work. i'll contact you as soon as i get my hands on it.

I've had this quite a lot of times but flashing a different kernel usually sorts of out right away