For the love of god, having 4 signal bars instead of 5 drives me insane. If there's a rom or mod that has this can someone point me in the right direction? Thanks!
Sent from my Sprint Galaxy Nexus CDMA using XDA
You can flash or use a theme depending on what rom you're using.
Sent from someone's Galaxy Nexus running AOKP + Franco
I'm running black ice 38. An aokp variant. I've never seen a them with 5 bars though
Sent from my Sprint Galaxy Nexus CDMA using XDA
imo, no point "cheating" yourself with the bars, the signal is going to be the same.
If you have a custom ROM, you may be able to change the bars into -(number)dBm.
AZ FadeOut said:
I'm running black ice 38. An aokp variant. I've never seen a them with 5 bars though
Sent from my Sprint Galaxy Nexus CDMA using XDA
Click to expand...
Click to collapse
I have, let me see which theme is was...
EDIT: Mixer ICS. Can be found on the Market.
Sent from someone's Galaxy Nexus running AOKP + Franco
Want to know something even worse? Every rom we have, the bars show DATA signal.
"Long is the way, and hard, that out of hell leads up to light."
I am running liquidsmooth 1.35 and I have a 6 bar signal
I don't use the signal bars at all. I replaced them with the dBm reading in the top right notification bar. Wouldn't you rather have that over any amount of signal bars?
joshnichols189 said:
Want to know something even worse? Every rom we have, the bars show DATA signal.
"Long is the way, and hard, that out of hell leads up to light."
Click to expand...
Click to collapse
I feel stupid, but what's the difference?
Sent from someone's Galaxy Nexus running AOKP + Franco
theking_13 said:
I feel stupid, but what's the difference?
Sent from someone's Galaxy Nexus running AOKP + Franco
Click to expand...
Click to collapse
I don't know anything about how HSPA handles this, but for Verizon it's like this:
1X is used for voice. Think of it as "2G"
EVDO is used for data. Think of it as "3G"
You might have 1X signal, and be able to make calls, but have no EVDO signal, so you can't browse the web.
So while you might have 1X signal and can make voice calls perfectly, your phone will show ZERO bars because you have no EVDO and can't browse the web.
joshnichols189 said:
I don't know anything about how HSPA handles this, but for Verizon it's like this:
1X is used for voice. Think of it as "2G"
EVDO is used for data. Think of it as "3G"
You might have 1X signal, and be able to make calls, but have no EVDO signal, so you can't browse the web.
So while you might have 1X signal and can make voice calls perfectly, your phone will show ZERO bars because you have no EVDO and can't browse the web.
Click to expand...
Click to collapse
This doesn't apply to the GSM nexus though. But its certainly true for the cdma nexus.
GSM nexus has only one signal both voice and data use the same signal reading.
RogerPodacter said:
This doesn't apply to the GSM nexus though. But its certainly true for the cdma nexus.
GSM nexus has only one signal both voice and data use the same signal reading.
Click to expand...
Click to collapse
Like I said I have no idea, I was under the assumption that all AOSP roms regardless of network technology did this.
Related
So, an older gentlemen I work with just picked up a Pantech Breakout from VZW - FREE after mail in rebate. He had absolutely no idea how to interact with device so I decided to give him a hand. I was actually pretty impressed with this Android 2.3.3 budget buy but I knew how vastly superior my Galaxy Nexus was compared to his. When I was showing him side by side some of the differences between GB and ICS, I noticed he had 2 bars of 4G and I only had two bars of 3G. I double checked to make sure CDMA/LTE was selected and gave it reboot.....NOTHING.
What a joke. Thoughts?
Its just telling you it has a better signal. According to VZW the Nexus just more accurately displays it.
Sent from my Galaxy Nexus using XDA App
Why wouldn't you toggle airplane mode? It's faster than a reboot.
Pacifik said:
Why wouldn't you toggle airplane mode? It's faster than a reboot.
Click to expand...
Click to collapse
Good to know.
I guess a more definitive test would have been a speedtest. We'll see what kind of results that yields.
Smokeey said:
Its just telling you it has a better signal. According to VZW the Nexus just more accurately displays it.
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
^^^^^+1
Your phone is just being honest. his phone not so much....
Sent from my SAMSUNG-SGH-I777 using XDA App
Keep in mind custom UI overlays usually inflate signal..
Wow.. r u guys serious.. I returned my GN because the signal issue is real..
I suppose you are correct in a way, the GN can only report what it can obtain, which is absolutely nothing in terms of signal strength.
Sent from my ADR6425LVW
the only well to tell who has the best signal is to look at the dB
Jay A whY said:
Wow.. r u guys serious.. I returned my GN because the signal issue is real..
I suppose you are correct in a way, the GN can only report what it can obtain, which is absolutely nothing in terms of signal strength.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
No one said the signal issue wasn't real.
Sent from my Galaxy Nexus using xda premium
Zepius said:
the only well to tell who has the best signal is to look at the dB
Click to expand...
Click to collapse
This is incorrect.
The signal strength displayed in settings for most phones don't show LTE - Nexus does, so you won't be looking at the same thing.
Also @OP, please stop comparing bars, the only thing it represents is that 1 bar is worse than 2 bars to its own kind that is also using the same skin.
His Nexus is only getting 3G, not 4G!
That sucks. I would flash the 4.0.3 radios.
Sent from my Galaxy Nexus using Tapatalk
guyhoang said:
His Nexus is only getting 3G, not 4G!
That sucks. I would flash the 4.0.3 radios.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
it would appear that guy was the only one who clearly understood the op's post...
Yeah it is absolutely crazy dealing with this signal issue. I am sitting here in the same location that I have 4-5 bars of 3g on my razr and literally have no bars on my nexus. Wtf?! Both set to cdma only. Using 4.0.3 radios.
Sent from my Galaxy Nexus using Tapatalk
epphllps said:
Yeah it is absolutely crazy dealing with this signal issue. I am sitting here in the same location that I have 4-5 bars of 3g on my razr and literally have no bars on my nexus. Wtf?! Both set to cdma only. Using 4.0.3 radios.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I read that the 4.0.3 baseband had 3G radio issues. You might want to flash the official 4.0.2 baseband to see if your signal improves.
Kunji said:
it would appear that guy was the only one who clearly understood the op's post...
Click to expand...
Click to collapse
It is actually not clear at all if the other phone was in 4G.
Like in:
http://www.anandtech.com/show/5254/investigating-the-galaxy-nexus-lte-signal-issue
RAZR still shows 4G icon even when sitting in 1x/EVDO.
draugaz said:
It is actually not clear at all if the other phone was in 4G.
Like in:
http://www.anandtech.com/show/5254/investigating-the-galaxy-nexus-lte-signal-issue
RAZR still shows 4G icon even when sitting in 1x/EVDO.
Click to expand...
Click to collapse
You beat me to it. . Basically you must make sure you are comparing apples to apples. You should use the db measurement for signal strength and not bars. You can not currently compare the GNex 4g signal to any other phone because ICS is the on version that can show your 4g signal in db. All previous versions lie.
The issue the OP had with not being able to lock on a 4g signal is a different matter. As the previous poster has stated, the pantech may not have had a 4g signal. Speed test may shed light on this. Personally I have not experienced that yet so maybe an issue with just his phone? If not then perhaps I have not noticed it when it happened to me. I'll try to monitor it more. I sit near the edge of a 4g signal so at home I'm always on wifi. It takes way to much juice to stay locked into 4g at home but it does stay locked. I can kill the battery in about 4 hours near the rear of my house with a mostly idle phone in 4g. I have to monitor it more when I'm not at home.
Sent from my Galaxy Nexus using Tapatalk
Oh yeah Anand Tech is definitely comparing apples to apples.. The Bionic is one of the worst phones in locking in and staying on a 4G signal.. There is a reason why the Bionic and GN was delayed. Crappy radios!
The GN would be the best phone out if it wasn't for its signal issues. I hate to be sound like the glass is half empty but it is a shame one must tweak the radio for a better signal. I'm still hoping that the GN is software correctable . I really like what the phone has to offer in regards to development. Only time will tell, good luck GN users!
Sent from my ADR6425LVW
draugaz said:
It is actually not clear at all if the other phone was in 4G.
Like in:
http://www.anandtech.com/show/5254/investigating-the-galaxy-nexus-lte-signal-issue
RAZR still shows 4G icon even when sitting in 1x/EVDO.
Click to expand...
Click to collapse
Where are you reading about the RAZR showing 4G icon while not in 4G? I have a similar issue with my Droid Charge where I will have a 4G icon but no data connectivity at all (not 3G/1X even).
PeterDLai said:
Where are you reading about the RAZR showing 4G icon while not in 4G? I have a similar issue with my Droid Charge where I will have a 4G icon but no data connectivity at all (not 3G/1X even).
Click to expand...
Click to collapse
Basically most phones with carrier/manufacturer involved skins will make it linger and display the 4G icon even when its cutting in/out. Mostly because people will freak out if their connection is changing all the time. The handoff between LTE and CDMA is really slow, so they just make it show 4G expecting it to come back to 4G soon when it drops.
The Nexus is showing your actual connection with no sugar coating.
PeterDLai said:
Where are you reading about the RAZR showing 4G icon while not in 4G? I have a similar issue with my Droid Charge where I will have a 4G icon but no data connectivity at all (not 3G/1X even).
Click to expand...
Click to collapse
For example, look here, the second photo in this article:
http://images.anandtech.com/doci/5254/EVDOvsLTE_575px.jpg
Motorola is in EVDO mode, but the icon in the status bar says "4G LTE".
Hello, I'm having trouble using 4G at home.
My friend's Verizon Razr has 2 signal bars of 4G LTE when my Galaxy Nexus only has 2 signal bars of 3G.
LTE is enabled on my phone and I've used 4G elsewhere so I know it works sometimes.
Can anyone help me with this? Thanks!
Try flashing the leaked radios
wayneb02 said:
Try flashing the leaked radios
Click to expand...
Click to collapse
I actually used that one using Clockwork Recovery mode. There is no difference as far as I can tell.
dilxadon said:
Hello, I'm having trouble using 4G at home.
My friend's Verizon Razr has 2 signal bars of 4G LTE when my Galaxy Nexus only has 2 signal bars of 3G.
LTE is enabled on my phone and I've used 4G elsewhere so I know it works sometimes.
Can anyone help me with this? Thanks!
Click to expand...
Click to collapse
Go into the "about phone" menu for both devices and see their actual dBm and network state. There is a known difference between the Galaxy Nexus and other Verizon phones. When on 4G, the Nexus will actually show the 4G signal in bars. The other devices often show 4G even when they're not connected, and when they are connected their bars show their 3G signal.
That being said, the Galaxy Nexus is often reported to just have raw signals lower than the competition. But the above statement should be something that's kept in mind when comparing the two.
martonikaj said:
Go into the "about phone" menu for both devices and see their actual dBm and network state. There is a known difference between the Galaxy Nexus and other Verizon phones. When on 4G, the Nexus will actually show the 4G signal in bars. The other devices often show 4G even when they're not connected, and when they are connected their bars show their 3G signal.
That being said, the Galaxy Nexus is often reported to just have raw signals lower than the competition. But the above statement should be something that's kept in mind when comparing the two.
Click to expand...
Click to collapse
Thanks! I will check and see if this is the case.
Is there anyway to tell if it's really 4G from the phone?
First i switched to verizon from att and got a razr and i used to get full bars signal on it but i switched it for the nexus and now i only get one bar or two if im lucky
Sent from my Galaxy Nexus using XDA App
pumasmedina7 said:
First i switched to verizon from att and got a razr and i used to get full bars signal on it but i switched it for the nexus and now i only get one bar or two if im lucky
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
You can thank the people who complained their signal bar was reporting too strong. Seriously. (Well, that and the fact that Motorola has the best radios.)
Sent from my Galaxy Nexus using xda premium
Just to support a fellow Gnex owner. I had a sony x10 and yeah, it definitely pulled in a signal much better than my Gnex.
you cant compare motorola radios to samsung. Moto makes the best radio on a phone with the exception of blackberry while samsung makes one of the worst. But i find that samsung has improved since the captivate. This is the only thing i really missed about my Atrix.
Combination of 3 things here.
1) The signal displayed on the Galaxy Nexus is the actual signal strength, whereas the RAZR likes to be generous with holding onto signal bars and over-display your actual strength.
2) On the Galaxy Nexus, when connected to LTE, the signal bars show your actual LTE signal strength (as reported by the phone settings). The RAZR will show your 3G signal strength in bars, even when connected to LTE. The best way to compare signals between the two is look at the Settings > About phone > Status, and compare specific dBm's.
3) The RAZR (and most Moto phones, honestly) just have better radio hardware. They blow Samsung out of the water.
do you have any connectivity issues? dropped calls? low data speeds?
if not then why do you even care how many bars you have? would you be happier if it always displayed full bars no matter what??
Different manufacturers use different algorithm to determine the graphical representation of signal strength in dbm. The actual performance is what matters.
If you do have problems then it might be your radio. What radio are you using right now?
ArmanUV said:
do you have any connectivity issues? dropped calls? low data speeds?
if not then why do you even care how many bars you have? would you be happier if it always displayed full bars no matter what??
Different manufacturers use different algorithm to determine the graphical representation of signal strength in dbm. The actual performance is what matters.
If you do have problems then it might be your radio. What radio are you using right now?
Click to expand...
Click to collapse
Yes to all your questions. Is a fact, the GN reception sucks. Places where you get 2 bars of LTE on any other phone, on the nexus you'll drop to 3G.
Sent from my Galaxy Nexus using xda premium
Dxtra said:
Yes to all your questions. Is a fact, the GN reception sucks. Places where you get 2 bars of LTE on any other phone, on the nexus you'll drop to 3G.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I don't have cdma so I can't comment on that. my gsm gnexus has decent reception, dare I say better than my iphone 4.
Have you tried the new 4.0.4 radios?
Hi, recently i upgraded to Codename 1.4.0 -4.0.3 CDMA and noticed improvements... Phone has better signal strength and actually works faster after upgrade.
Sent from my Galaxy Nexus using Tapatalk
Hey guys, I recently upgraded to Mobilicity's 4G plan, but I want to know if is it just me, or is CM10 having issues with data connection? I'm not getting 4G speeds a lot, and it doesn't even show 4G by the bars. It just shows H+ and a lot of the times, it bounces around from h to 3G to H+ and back, then it'll go to H+ and start working. So, My question is, is this normal, to not see 4G by the bars, even though i'm on the 4G plan for Mobilicity. If that first one is a yes, then is it also normal that it bounces around from the H, 3G, to H+ for a bit then get a working connection on H+. And thirdly, is the wildly fluctuating speeds normal? Some times slow speeds and some times fast? And I don't think i Lost my IMEI, I see the number on my settings. And a Bonus question, I hear yesterday we were supposed to get the JB update, any word on that? Going to need to go back to stock and unroot the phone if so.
CM10s radio firmware just displays the signal differently. 3g-4g = 3g-H+
Sent from my SGH-T999 using Tapatalk 2
H+ is what the touchwiz ROM would call 4g...it also calls 3g 4g so cm10 is showing what you're really getting service wise. There's nothing different happening on your phone
Sent from my SGH-T999 using xda premium
papi5120 said:
H+ is what the touchwiz ROM would call 4g...it also calls 3g 4g so cm10 is showing what you're really getting service wise. There's nothing different happening on your phone
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Ohh okay. But is anyone else having random data speed drops? sometimes it's amazingly fast, where as others it's really slow.
Its not that its displaying it wrong. I believe it is actually switching between 3g and 4g (hspda+) data. It is probably a data tweak used to conserve battery because things like text messages don't need full hspda data. I've noticed that when im texting it uses 3g but when web browsing or YouTube, it switches to H+
Sent from my SGH-T999 using Tapatalk 2
Hey all! Ok, so my gf has had this S2 from Koodo (Telus) since January. Out of the box it came with LTE/4G enabled and working fine. However, I rarely leave things alone and right away I installed TWRP, AOKP and I think, Tiberius Kernel. Have been using variations of each since. However, ever since I did that, the 4G hasn't worked. In the phone settings it says LTE/GSM Auto. However if I change it to anything else, like LTE ONLY, for example, it just stays at LTE/GSM auto. Nothing happens. So I am wondering how to get her 4G to work again since I know it is fully capable of it and my area does have working LTE.
santeana said:
Hey all! Ok, so my gf has had this S2 from Koodo (Telus) since January. Out of the box it came with LTE/4G enabled and working fine. However, I rarely leave things alone and right away I installed TWRP, AOKP and I think, Tiberius Kernel. Have been using variations of each since. However, ever since I did that, the 4G hasn't worked. In the phone settings it says LTE/GSM Auto. However if I change it to anything else, like LTE ONLY, for example, it just stays at LTE/GSM auto. Nothing happens. So I am wondering how to get her 4G to work again since I know it is fully capable of it and my area does have working LTE.
Click to expand...
Click to collapse
The t989d doesn't have lte. Doesn't have the hardware for it.
Sent from my cell phone telephone
Ok but my mother has the same phone (got them each one) but I haven't touched that one and it says 4G by the signal bars... Why is that?
Sent from my Nexus 4 using xda premium
santeana said:
Ok but my mother has the same phone (got them each one) but I haven't touched that one and it says 4G by the signal bars... Why is that?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
4g is the same as H+ on custom roms. And now some say DC. Not sure why they left behind the 4g symbol, but its all the same thing. So if you see H+, DC or 4g, its all actually 4g.
You should be on GSM/wcdma preferred in mobile settings.
Sent from my cell phone telephone
kj2112 said:
4g is the same as H+ on custom roms. And now some say DC. Not sure why they left behind the 4g symbol, but its all the same thing. So if you see H+, DC or 4g, its all actually 4g.
Sent from my cell phone telephone
Click to expand...
Click to collapse
Oh ok! Thanks!
Sent from my Nexus 4 using xda premium
I have sorta the same problem, except I have a tmobile s2 t989. I flashed cm 10.1 nightlies and the newest radio. Phone works good except my phone no longer shows the 4G symbol above the signal bars. It instead says 3G. Before rooting it said 4G above the signal bars. Every once in a while it says DC. Any advice?
iMacMane said:
I have sorta the same problem, except I have a tmobile s2 t989. I flashed cm 10.1 nightlies and the newest radio. Phone works good except my phone no longer shows the 4G symbol above the signal bars. It instead says 3G. Before rooting it said 4G above the signal bars. Every once in a while it says DC. Any advice?
Click to expand...
Click to collapse
Explained the symbols in posts above. And if you are getting a lot of 3g....that's reception. Your losing your 4g connection and its picking up 3g. Usually for this to happen you'd only be getting about 1 bar on your signal.
Sent from my cell phone telephone
kj2112 said:
Explained the symbols in posts above. And if you are getting a lot of 3g....that's reception. Your losing your 4g connection and its picking up 3g. Usually for this to happen you'd only be getting about 1 bar on your signal.
Sent from my cell phone telephone
Click to expand...
Click to collapse
I appreciate the info. I live in Orlando and I'm pretty sure we have tmobiles 4g or hspa+. I was just wondering why I'm only getting 3G date speeds instead of 4G speeds. The internet still seems relatively fast but wanted to make sure the phone wasn't slowing down the speeds to 3G speeds.
iMacMane said:
I have sorta the same problem, except I have a tmobile s2 t989. I flashed cm 10.1 nightlies and the newest radio. Phone works good except my phone no longer shows the 4G symbol above the signal bars. It instead says 3G. Before rooting it said 4G above the signal bars. Every once in a while it says DC. Any advice?
Click to expand...
Click to collapse
Aosp ROMs run on 3g (umts) until data is called. Once data is called it will pull up h+(hspa+)or dc(dc-hspa) depending on your area. Its a battery saving feature and the stock Samsung ROMs show 4g all the time. Unless on edge or GPRS. I think even touchwiz ROMs went to umts while idle.
sent from my t989 hercules