i looking for stable roms. i have the simiomns 3.5 on my girlfriends phone, but when i tryed to install the same 3.5 sence rom it is glitchy and unstable. playstore dosent work ant google related really. please help thank you
what kind of wfs do you have?? A510e etc...
That I am not sure it is on the metro pcs network
Sent from my LG-MS910 using Tapatalk
please go to settings/about phone and look for model number mine is A510e yours may be different but similar
---------- Post added at 05:39 PM ---------- Previous post was at 05:32 PM ----------
done some digging and turns out your better to stay stock because people have reported lose of data among others check this forum for more information
http://forum.xda-developers.com/showthread.php?t=1531932
click thanks if i helped
Related
I bought and rooted my Galaxy S3 a few months ago. since then I have flashed several roms. When the jellybean update came along I flashed a stock rom so I could update to stock jellybean, after the update to jellybean i noticed that my phone signal kept cutting out. The meter would cycle from full bars down to no bars then back up again over and over. while this was happening I could not make or receive calls. Tuns out the problem is caused by the IMEI reading 0. I don't know when this actually happened weather before or after the update. I have been trying to figure out how to fix this, but I don't understand what little I have found on the internet. Can anyone help me?
Yes
Sent from my SGH-I747 using xda premium
---------- Post added at 09:24 PM ---------- Previous post was at 09:23 PM ----------
http://forum.xda-developers.com/showthread.php?t=1801997
Sent from my SGH-I747 using xda premium
---------- Post added at 09:26 PM ---------- Previous post was at 09:24 PM ----------
You have the dreadful "0". May have data issues. No 4g. I assume you have no NV backup
Sent from my SGH-I747 using xda premium
I'm simple caveman and don't understand your magic talking machines
Ends said:
Yes
Sent from my SGH-I747 using xda premium
---------- Post added at 09:24 PM ---------- Previous post was at 09:23 PM ----------
http://forum.xda-developers.com/showthread.php?t=1801997
Sent from my SGH-I747 using xda premium
---------- Post added at 09:26 PM ---------- Previous post was at 09:24 PM ----------
You have the dreadful "0". May have data issues. No 4g. I assume you have no NV backup
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks for the link but I dont understand what they are talking about.
like: "Put phone into RMNET + DM + MODEM mode"
I have no idea what that is.
and this section: "Look in device manager under ports and serials you should see your phone there.
Now open QPST Configuration click on ports tab and then on Add new port button type in COM## where ## is the port number your phone is connected to."
Is this even english? I'm sorry but i'm a newbie and have no idea what im doing.
labrat1974 said:
Thanks for the link but I dont understand what they are talking about.
like: "Put phone into RMNET + DM + MODEM mode"
I have no idea what that is.
and this section: "Look in device manager under ports and serials you should see your phone there.
Now open QPST Configuration click on ports tab and then on Add new port button type in COM## where ## is the port number your phone is connected to."
Is this even english? I'm sorry but i'm a newbie and have no idea what im doing.
Click to expand...
Click to collapse
You are putting your phone into RMNET + DM + MODEM mode by using the Stock Dialer on a Stock ROM and entering the service code provided in the thread (*#7284#).
There are some good videos on YouTube of how to fix this and how make a back up in case it happens again. It a lot easier than it sounds.
Thanks
Sent from my i747 at&t
imei fixed
:laugh:
Thank you all for your support. after watching the youtube videos I could find and reading the guide posted in the link i was able to follow the steps and fix my imei. thanks again guys I can't tell you how worried i was that my phone was trashed.:good:
labrat1974 said:
:laugh:
Thank you all for your support. after watching the youtube videos I could find and reading the guide posted in the link i was able to follow the steps and fix my imei. thanks again guys I can't tell you how worried i was that my phone was trashed.:good:
Click to expand...
Click to collapse
What's funny is my IMEI decided to implode itself after I flashed the 1/15 Cm build.. Fixed it and everything is up and running now, just never thought it would happen to me. The only thing I can think of for why this happened to me, was because I had just switched back to CWR from TWRP.. not sure if there is a connect, but seems plausible. Back to TWRP now.
Hey all..!! i was recently taking a look at the build.prop file in my phone and i tried changing the name of processor...
Since this experiment was a success thought i should share it with you all....
It gives a very classy feel although its just a simple trick...
i tried this on a custom rom (sense 4.1 rom) but cant say weather it will work on stock or other roms
edit the
ro.product.processor = Single core
to
ro.product.processor = xxxxxxx
xxxxxx= any name you like
Note do not edit the value of ram...!!!!! Or do any other at your own risk i only tried it with processor
after changing the value just reboot..
you will need to use a root explorer
hope u find this information interesting
It's already know that you can modify things in build prop, and by the way no one will ever believe your processor is an i3 so it's just a little pointless
---------- Post added at 07:02 PM ---------- Previous post was at 06:55 PM ----------
And what if I told you, you can also change the phone's name :sly::sly:
mr_nooby said:
It's already know that you can modify things in build prop, and by the way no one will ever believe your processor is an i3 so it's just a little pointless
---------- Post added at 07:02 PM ---------- Previous post was at 06:55 PM ----------
And what if I told you, you can also change the phone's name :sly::sly:
Click to expand...
Click to collapse
HELL I CAN HAVE KEY LIME PIE TOO! :victory::victory::victory::laugh::laugh::laugh:
wtf, i dont have that product.processor line?
Sent from my One V using xda premium
mr_nooby said:
It's already know that you can modify things in build prop, and by the way no one will ever believe your processor is an i3 so it's just a little pointless
---------- Post added at 07:02 PM ---------- Previous post was at 06:55 PM ----------
And what if I told you, you can also change the phone's name :sly::sly:
Click to expand...
Click to collapse
Well I know nobody will believe and that its pointless the only thing is I didnt like that single core written in processor name so
I thought that I should share this ...moreover there are always a few people who like this idea....
martijn99 said:
wtf, i dont have that product.processor line?
Sent from my One V using xda premium
Click to expand...
Click to collapse
Which Rom are currently using there are chances this line is missing if u are using a non-sense Rom like cm or any other aosp...
im using cm10.
Sent from my One V using xda premium
martijn99 said:
im using cm10.
Sent from my One V using xda premium
Click to expand...
Click to collapse
As is said u won't find that in this Rom even if it were there's ni option in settings or any other app that shows details about your processor its only in sense...
ow okay, but anyway thanks!
Sent from my One V using xda premium
http://forum.xda-developers.com/showthread.php?t=2468042
DO NOT FLASH this rom as I do not know if it will go perfectly or catch your phone on fire. I take no responsibility for your actions.
With that said, here it is 4.3 for the N7100 and I was hoping that a developer would be able to port it. Judging from the discussion I have been reading Knox is included and causes some problems with root but you can disable Knox from your app manager. Anyone with porting experience care to weigh in?
GRZLA said:
http://forum.xda-developers.com/showthread.php?t=2468042
DO NOT FLASH this rom as I do not know if it will go perfectly or catch your phone on fire. I take no responsibility for your actions.
With that said, here it is 4.3 for the N7100 and I was hoping that a developer would be able to port it. Judging from the discussion I have been reading Knox is included and causes some problems with root but you can disable Knox from your app manager. Anyone with porting experience care to weigh in?
Click to expand...
Click to collapse
Did someone tried this yet:
http://forum.xda-developers.com/showthread.php?t=2467910
jinda628 said:
Did someone tried this yet:
http://forum.xda-developers.com/showthread.php?t=2467910
Click to expand...
Click to collapse
Only for N7100
one80oneday said:
Only for N7100
Click to expand...
Click to collapse
Hmm, yeah didnt see that. I only saw the forum sub title seeing N7105
Well maybe we'll have ours soon.
I tried flashing a couple ROMs with this base and all they did was get as far as the boot screen, and then the phone vibrated in a pattern similar to Morse code lol XD I went to recovery and restored my last ROM and all was well. I hope we see a port soon!
---------- Post added at 05:31 PM ---------- Previous post was at 05:30 PM ----------
Thunder Kit Kat was the first one I tried, actually.
sabrdawg said:
I tried flashing a couple ROMs with this base and all they did was get as far as the boot screen, and then the phone vibrated in a pattern similar to Morse code lol XD I went to recovery and restored my last ROM and all was well. I hope we see a port soon!
---------- Post added at 05:31 PM ---------- Previous post was at 05:30 PM ----------
Thunder Kit Kat was the first one I tried, actually.
Click to expand...
Click to collapse
You, sir deserve a "Recognized Guinea Pig" badge. Thank you for you service.
I'm reading extremely positive response for update on other variants.
must have this...but cant give up wifi calling on tmo
Sent from my SGH-T889 using xda app-developers app
Wheek wheek! Any time
I wonder if it would at least be possible to pull some of the newer features out...
This is working for me except for the radio. WiFi is working wonderfully and this thing is blazing fast!
http://forum.xda-developers.com/showthread.php?t=2467910
Seems to be for the international version not the T Mobile version
Sent from my SGH-T889 using xda app-developers app
I also just flashed the Hawkish ROM and it is AWESOME. Once we can get the radio working for our device, we'll be in business
---------- Post added at 12:08 PM ---------- Previous post was at 12:06 PM ----------
xsessive said:
Seems to be for the international version not the T Mobile version
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Exactly. Meaning that all that's missing is the radio...There are devs out there working very hard on this as we speak
That's awesome let's hope it works out
Question is wifi calling out of the question?
Sent from my SGH-T889 using xda app-developers app
sabrdawg said:
I also just flashed the Hawkish ROM and it is AWESOME. Once we can get the radio working for our device, we'll be in business
---------- Post added at 12:08 PM ---------- Previous post was at 12:06 PM ----------
Exactly. Meaning that all that's missing is the radio...There are devs out there working very hard on this as we speak
Click to expand...
Click to collapse
Are there any updates on this yet?
Sent from my SGH-T889 using XDA Premium 4 mobile app
sRs DoLLaR mEnU said:
Are there any updates on this yet?
Sent from my SGH-T889 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nothing yet as far as I know. We are waiting for Samsung to release a kernel for our models.
One day I was working on my phone and accidentaly dropped it. I think this is the proper reason why I am getting the marks on the screen that keep spreading out. Any of you have any solution for this? Check the pictures down below.
That looks more like a thumbprint.. Maybe water damage?
Sent from my MB886 using Tapatalk
---------- Post added at 05:11 PM ---------- Previous post was at 05:10 PM ----------
U still on ics? Lol.
Sent from my MB886 using Tapatalk
marknoll said:
That looks more like a thumbprint.. Maybe water damage?
Sent from my MB886 using Tapatalk
---------- Post added at 05:11 PM ---------- Previous post was at 05:10 PM ----------
U still on gingerbread? Lol.
Sent from my MB886 using Tapatalk[/Q]
No, not in fact. That is not a watermark and I'm not on GB, I was on 4.1 sense 4.04 android but changed it now, looking for a good ROM here on xda. Thanks for your reply!
Click to expand...
Click to collapse
Shawiee said:
marknoll said:
That looks more like a thumbprint.. Maybe water damage?
Sent from my MB886 using Tapatalk
---------- Post added at 05:11 PM ---------- Previous post was at 05:10 PM ----------
U still on gingerbread? Lol.
Sent from my MB886 using Tapatalk[/Q]
No, not in fact. That is not a watermark and I'm not on GB, I was on 4.1 sense 4.04 android but changed it now, looking for a good ROM here on xda. Thanks for your reply!
Click to expand...
Click to collapse
By the looks it should be SVHD because i was on that for a longtime. About your issue, I recognize you coz you've make a thread couple of months ago i believe. I saw that, Surprised that hasn't fixed yet.
Imo, Its a digitizer issue, i wrote back then and still continuing with it as Screen is completely intact, Just you need to Pop digi. on n off. Now it make require some skill and proper tool otherwise touch issue will make your device inoperable.
So Google for Digitizer replacement on Desire HD, watch some YouTube videos available and do it with patience.
About the ROM, i've sent you a post.
Click to expand...
Click to collapse
dr.patron99 said:
Shawiee said:
By the looks it should be SVHD because i was on that for a longtime. About your issue, I recognize you coz you've make a thread couple of months ago i believe. I saw that, Surprised that hasn't fixed yet.
Imo, Its a digitizer issue, i wrote back then and still continuing with it as Screen is completely intact, Just you need to Pop digi. on n off. Now it make require some skill and proper tool otherwise touch issue will make your device inoperable.
So Google for Digitizer replacement on Desire HD, watch some YouTube videos available and do it with patience.
About the ROM, i've sent you a post.
Click to expand...
Click to collapse
Thank you for your reply. Yes, I was running SVHD that time but now I'm on MIUI and I'm having problems with notifications so I'm changing it again. About that thread, I found the fix thanks to someone that replied there, i forgot to flash the boot.img manually as I'm S-ON.
Click to expand...
Click to collapse
Shawiee said:
marknoll said:
That looks more like a thumbprint.. Maybe water damage?
Sent from my MB886 using Tapatalk
---------- Post added at 05:11 PM ---------- Previous post was at 05:10 PM ----------
U still on gingerbread? Lol.
Sent from my MB886 using Tapatalk[/Q]
No, not in fact. That is not a watermark and I'm not on GB, I was on 4.1 sense 4.04 android but changed it now, looking for a good ROM here on xda. Thanks for your reply!
Click to expand...
Click to collapse
Umm. Yea it is. That sense 4.1 is ics based
---------- Post added at 04:52 PM ---------- Previous post was at 04:46 PM ----------
dr.patron99 said:
Shawiee said:
By the looks it should be SVHD because i was on that for a longtime. About your issue, I recognize you coz you've make a thread couple of months ago i believe. I saw that, Surprised that hasn't fixed yet.
Imo, Its a digitizer issue, i wrote back then and still continuing with it as Screen is completely intact, Just you need to Pop digi. on n off. Now it make require some skill and proper tool otherwise touch issue will make your device inoperable.
So Google for Digitizer replacement on Desire HD, watch some YouTube videos available and do it with patience.
About the ROM, i've sent you a post.
Click to expand...
Click to collapse
Ics is best for this device. Actually cm 10.1 is the best
Click to expand...
Click to collapse
Click to expand...
Click to collapse
As the title states I just switched, I have run into a problem though.. I tether my phone to my computer through wifi hot spot but since I switched carriers whenever I try to hot spot now it tells me to contact AT&T to set up?? Any way to get around this?? I'm on stock4.4.2
There is a way
Dont remember how but i found it on these forums by searching
Im also on stock 4.4.2
But rooted and custom recovery
I remember i had to edit a line with sqlight editor in the system database
It was rather simple
Ill see if i can find the thread back
Sent from my LG-E980 using Tapatalk
---------- Post added at 12:40 AM ---------- Previous post was at 12:35 AM ----------
http://forum.xda-developers.com/showthread.php?p=60364452
Sent from my LG-E980 using Tapatalk
Thanks for the link.. i'll give it a try.