I was installing the ICS in kies the computer was shut down and now I get an issue fimware Please upgrade Encountered in recovery mode and the recovery kies asks me for a code put q pq cell not read the thanksssssss
If you can odin, flash stock and try again.
if u can boot to..
if u can boot to the samsung screen ..it white and says samsung then try to use the 3 button combo both volume keys and power while usb is connected to the computer.. open odin google-(odin samsung) find the odin file ofr ics or gb look in android dev i hope that help better then the other guy ^^^:good:
Hi guys.
I was having problems with 3G in my Samsung GT-I8150 and so i run Samsung Kies and he warned me about a firmware update.
So far so good, ive made the firmware upgrade.
When the phone restarted it shows me the message : Firmware upgrade encountered an issue gt- i8150 , please select recovery mode in kies & try again?
So now when i inter in download mode it shows me the RamDump Mode so i cant install another rom by ODIN method and in cant enter recovery mode.
What should i do? is there any solution or is the phone bricked?
Help please
MeGaBeSuNTa said:
Hi guys.
I was having problems with 3G in my Samsung GT-I8150 and so i run Samsung Kies and he warned me about a firmware update.
So far so good, ive made the firmware upgrade.
When the phone restarted it shows me the message : Firmware upgrade encountered an issue gt- i8150 , please select recovery mode in kies & try again?
So now when i inter in download mode it shows me the RamDump Mode so i cant install another rom by ODIN method and in cant enter recovery mode.
What should i do? is there any solution or is the phone bricked?
Help please
Click to expand...
Click to collapse
Send to Samsung and pay for fixing it.
Sent from my GT-I8150 using xda premium
MeGaBeSuNTa said:
Hi guys.
I was having problems with 3G in my Samsung GT-I8150 and so i run Samsung Kies and he warned me about a firmware update.
So far so good, ive made the firmware upgrade.
When the phone restarted it shows me the message : Firmware upgrade encountered an issue gt- i8150 , please select recovery mode in kies & try again?
So now when i inter in download mode it shows me the RamDump Mode so i cant install another rom by ODIN method and in cant enter recovery mode.
What should i do? is there any solution or is the phone bricked?
Help please
Click to expand...
Click to collapse
if you can't turn it on (meaning that u can't use the phone ) , the phone is bricked
BUT if u can do it , just do the update again
ALSO, are u sure u entered the download mode???( Volume up + main button + power button)
OR did u do something wrong during the update process?? (such as turning off the phone during the update)
If still can't solve the problem, take to Samsung and fix it.
try to flash stock ROM.. find a thread for flashing with ODIN in General Section..
[Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try againn
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Really?
mrhaley30705 said:
Just for giggles, plug your phone into Odin on that screen. If it recognizes it (blue com box lights up), use that screen as download mode. But, i would download your file again, making sure to get the one for the I747M.
Click to expand...
Click to collapse
Would that actually work cuz im stuck in the same situation... and i just got my tab today after repairs. and i dont wanna screw it up again cuz of parents so im just gonna give it a try to see if it works
Help
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
If you can get your device back into download mode, you could relay the stock firmware from www.stockbroker.net. Select the file you downloaded under pda in Odin and flash it. Hope this helps. You can try to root again from there.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Upgraded to 4.1.1 even after soft-brick !
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Dezzy87 said:
Has no one solved this issue yet? I just encountered it also I'm on t-mobile.
Click to expand...
Click to collapse
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
macuruso said:
Has no one solved this issue yet?
I can't do anythiing with mi S3... not responding yet
Click to expand...
Click to collapse
can you get into download mode
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
i have the same error (firmware upgrade encountered an issue. please select recovery mode in kies and try again) on my Samsung Galaxy Tab 2 10.1 but i dont have this
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
I cant get my tablet in download or recovery, Kies doesnt recognise my tablet either? what do i do? please if someone has solved it plz plz plz tell me
Also when i plug my tablet into my PC i get "USB device not recognised" how do i fix that too?
akshar102 said:
Soft-brick aka " firmware upgrade encountered an issue " - screen in galaxy s3 sgh-i747 is a warning bell that somehow device might get interrupted while updating firmware , now i tried twice with old odin , and twice with new odin , what you got to do is just keep on trying and make sure that your galaxy s3 SGH-i747 drives are installed then after restart your pc , tried kies already , just waste of times , wasted 2 hours yet that official software didnt help me to upgrade or recover my device !
Finally i executed Odin 3.7 ( run as admin ) then --> ticked box : auto reboot , F. reset time ! upload that Firmware upgrade of Jelly bean in PDA section and wait till it gets loaded then press start ! ( i had to do this 3 times n then it worked , so dont lose the hope , keep trying over and over again ) and it will take 6~7 minutes as new OS is big around 1 GB ! so dont unplug device and ur done , then after completion , cellphone will restart with new settings and new OS !
---------- Post added at 03:14 AM ---------- Previous post was at 03:07 AM ----------
Read my general opinion in this thread , and find compatible ROM for T-mobile and it will work with new Odin 3.7 !
Click to expand...
Click to collapse
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
djcnote562 said:
Im going to try this again and again I have the same screen on my verizon galaxy note 2 that I WAS trying to unlock for t mo and just went about it the wrong way. My screen says the same ol Firmware upgrade encountered an issue...... I CAN get into Odin to upload a firmware and IT DOES recognize the phone BUT no matter what firmware I try nothing works its stuck in the same mode. I think I have looked at all available videos and threads on this but nothing :crying: should I keep tryong to flash the rom or just give up? Any more help is appreciated thanks!
Click to expand...
Click to collapse
This is for the S3, flashing it's firmware on the Note 2 won't work. I highly suggest you go on the Note 2 section.
I found a fix for this problem
jdz7t8 said:
Hey guys i just got my Galaxy s 3 tonight and I came home and tried to root it.I was in Odin. I selected PDA, selected the tar file and tried to root. It started then said "fail." I tried to restart but I'm stuck at a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again." I am using a Rogers Galaxy S3 in Canada. All I'm seeing on my screen is "firmware upgrade encountered an issue. please select recovery mode in kies and try again." At the top left it says:
ODIN MODE
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: Yes (1 counts)
SYSTEM STATUS: Official
QUALCUM SECUREBOOT: ENABLE
Click to expand...
Click to collapse
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Re: [Q] Firmware upgrade encountered an issue.Select recovery mode in Kies & try agai
1)Download this file www.mediafire.com/?bbfsnnub9gzg5wj
2)Go into download mode
3) connect your device to the computer and run ODIN as an administrator
4)Open the file and click start
5) Your phone should reboot
6) if your phone gets in a boot loop you need to download the latest firmware for your device
I hope this could help you, if the instructuions were unclear, send me a message and i will do my best to help you!
Sent from my GT-P5113 using xda app-developers app
Download cwm-touch-i717-120414.tar.md5
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
How any pages did you go back to find this thread? It literally has sat, answered and untouched for close to 2 months
it worked
man it worked used the error screen as download mode and it reflashed with even all my settings awesome .... thanks
use one of the $8 dongles. supersimple
cheers
ManUYSC said:
Connect to Odin.
Once Odin Recognizes/connects to your phone.
Download Clockwork: (Download cwm-touch-i717-120414.tar.md5)
Choose PDA and browse to the file and click Start on Odin.
Your Phone should now Reboot correctly.
Make sure you download the correct "new MOD" for your phone.
Click to expand...
Click to collapse
You are my hero! Ignore that little girl beneath your post, I'm glad you took the time to post the solution.
Ainol novo 8 discover flashing firmware error
Sir i have ainol novo 8 discover it has a problem that when i install firmware files on my discover with firmware tool there have a problem is data.img file cant install on my tblet software shows WRITE DATA PARTITION FAILED..and u can see screen shot also plzzzz help me what i do.plzz thanks in advance.
Hello guys
Need your Help plz
This is my first Post on XDA forum...I was trying to install CYANOGENMOD 10 From SD CARD using ROOMMANAGER .but something wrong has happened .I think that I made a big mistake.my original rom is I5510JPKD3,Now all I can see , is SAMSUNG logo
Im trying now to enter recovery mode and downloading mode using A+Power And T+ Power buttons ( i have azerty keyboard) to make flash with ODIN Soft, but it still doesn’t work
Thanks in advance
Try flashing the default firmware for it.
danger_beast said:
Try flashing the default firmware for it.
Click to expand...
Click to collapse
My Phone can only enter Emergency download mode.i tried to flash it with ODIN but it stuck at "setup connection"..
Well first make sure u hv correct drivers for that download kies usb driver u can get it over internet first start odin and load the file then connect the mobile while u're in download mode...... if nothing works try google like fastboot 'ur device name' or the last option customer care
hello friends!!
I tried to root my phone / tablet galaxy tab 3
and he ended up getting caught in bootloop "GALAXY TAB 3" screen and resets so forth.
aperelho model is SM-T211
GSM model
thanks to anyone who can help me
sorry for the english I'm from Brazil
To restore the firmware on your device & Unbrick
Make sure that whatever you do, you are doing it at your own responsibility. :crying:
Your phone’s battery must be charged at least over 60%
Download the firmware of your country (Google it)
Download Odin (Google it)
Download Samsung drivers (Google it)
Extract Odin 3.07 program to desktop
Extract firmware to desktop
Press and hold power, home, and volume down. you will see a warning screen then press volume up to enter Odin mode on the tablet
Now the device is in download mode. Plug in usb cable to computer and device
Run odin 3.07 and wait to see the com port connect.
Click on pda button in odin and find the firmware file you extracted to your desktop and select it
Hit start now and sit back, it will take a few seconds to flash the recovery and your device will reboot.
yoshuagd said:
hello friends!!
I tried to root my phone / tablet galaxy tab 3
and he ended up getting caught in bootloop "GALAXY TAB 3" screen and resets so forth.
aperelho model is SM-T211
GSM model
thanks to anyone who can help me
sorry for the english I'm from Brazil
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/1/
above link for firmwares from official site
brazil has quite a lot of firmware so u choose which 1 u want
the odin tutorial has already been posted just follow the steps
DONT MAKE ANY CHANGES IN ODIN SETTINGS
just select on pda choose file and start after connecting ur tab
u may need drivers for ur device
Post questions in q and ans section from next time
thank you friends!
but now screwed
when I was putting the new firmware
my computer rebooted
in download mode
now not even that works ..