Hi,
first i love these ROM ICS 4.0.4 BCM RC3.7U0 GSM/CDMA .
Questions .
I have Stock HBOOT and in the ROM is Mounts2SD activated with APPS?
In the GUI its activated and in the terminal. But there is not to much space that's why i use Link2SD too .
All Apps are running except Adobe Reader, Amazon Kindle, Angry Birds, Mx Player, Navigon Select - with Link2SD .
Yesterday i activated in the GUI Mounts2SD Dalvik Cache and have much errors with APPs.... closed and the system is slowly .
Before the nice ROM i habe CM 7.1, 7.2 and Link2SD with no errors.
HBOOT Stock
S-Off
ext3 1GB 2.partion
Whats the solution?
HBOOT the right one?
how can i use only Mounts2SD with more space?
Hi,
By now I've seen problems appearing several times when moving dalvik to SD on ICS...
Have you tried to run fix_permissions?
What happens if you deactive dalvik in mounts2sd? still so many errors?
no errors - apps closed when
- Mounts2SD Apps enabled
- the most Apps moved to SDext with link2SD
- Adobe Reader, Amzon Kindle, Angry Birds, MX Player, Navigon Select runs only when they moved with A2SD.
errors - when enabled Dalvik Cache
- when i reboot the desire
- long booting
- log in the system is very slow
- open apps like maps.... the apps are closed
on CM 7.1, 7.2 RC1 & 2
- link2SD APPS, Dalvik Cache, DATA moved to sd_ext
- no Problems
chief_wigum said:
Hi,
first i love these ROM ICS 4.0.4 BCM RC3.7U0 GSM/CDMA .
Questions .
I have Stock HBOOT and in the ROM is Mounts2SD activated with APPS?
In the GUI its activated and in the terminal. But there is not to much space that's why i use Link2SD too .
All Apps are running except Adobe Reader, Amazon Kindle, Angry Birds, Mx Player, Navigon Select - with Link2SD .
Yesterday i activated in the GUI Mounts2SD Dalvik Cache and have much errors with APPs.... closed and the system is slowly .
Before the nice ROM i habe CM 7.1, 7.2 and Link2SD with no errors.
HBOOT Stock
S-Off
ext3 1GB 2.partion
Whats the solution?
HBOOT the right one?
how can i use only Mounts2SD with more space?
Click to expand...
Click to collapse
I recommend to try to 'fix permission'
Alternatively you can boot into recovery, and wipe dalvik/cache am reboot. The first boot is rather slow, but should be fine after.
Sent from my HTC Desire using XDA
You shouldn't use L2SD and M2SD at the same time, bro. Choose one of them.
M2SD set to Apps+Dalvik to sd-ext is just fine for stock HBOOT, I used just the same until I flashed Data++ HBOOT.
Sent from nowhere
Actually I can't see a reason why you have used all those scripts together but with the build in m2sd this is what I've got:
Sent from my HTC Desire using Tapatalk
so, i moved the apps back with link2sd, delete link2sd and reboot.
Now i have 63 MByte free space with Mounts2SD only apps.
What is good to move Dalvik Cache, Data?
My MicroSDHC 16 GByte Class 6
I will install Google Chrome, but i faild with no space
Don't use mount2sd and link2sd together..... You'll face issues.... I did too.....
Just use m2sd to move app and data to sdext.....you'll have plenty of space...and leave dalvik on nand
Sent from outer space using RF transmitters
Is there any way to download M2SD? I need to to move my Cache (not Dalvik Cache) as it's filled and I can't install any more apps. I can't seem to find it anywhere and no scripts or other apps I've looked at can move the Cache.
EDIT: Found it!
chief_wigum said:
so, i moved the apps back with link2sd, delete link2sd and reboot.
Now i have 63 MByte free space with Mounts2SD only apps.
What is good to move Dalvik Cache, Data?
My MicroSDHC 16 GByte Class 6
I will install Google Chrome, but i faild with no space
Click to expand...
Click to collapse
I'd try starting a fresh.
@Yasir Javed Ansari
now i have only Mounts2SD.
My Questions
should i enabled in Mounts2SD Cache, Data too and some more?
Is it good to enabled that or not?
I can't install Google Chrome
now i enable in the Mounts2SD GUI Dalvik Cache and after a while its running smooth .
With RC3.6U0 and RC3.6U1 its smooth
With RC4.0U0 its like the desire have an HDD - when i touch at the apps take a little time to come.
Where is CID the new BootAnimation from CM9?
Yasir Javed Ansari said:
Don't use mount2sd and link2sd together..... You'll face issues.... I did too.....
Just use m2sd to move app and data to sdext.....you'll have plenty of space...and leave dalvik on nand
Sent from outer space using RF transmitters
Click to expand...
Click to collapse
i totally agree with this
i have just created the same setupalthough i have changed Hboot to alpharev Data++
I have now installed every app i have ever installed and still have over 100mb free with just apps on sd. putting data there too means virtually all of internal memory free
---------- Post added at 11:31 PM ---------- Previous post was at 11:21 PM ----------
chief_wigum said:
now i enable in the Mounts2SD GUI Dalvik Cache and after a while its running smooth .
With RC3.6U0 and RC3.6U1 its smooth
With RC4.0U0 its like the desire have an HDD - when i touch at the apps take a little time to come.
Where is CID the new BootAnimation from CM9?
Click to expand...
Click to collapse
Are you sure this isnt the known problem associated with partitioning with CWM? Use 4ext if so.
I recommend merging ext3 to ext4 partition
all is fine now with RC4.0U1
only with Chrome
when i start Chrome it says that some data is missing .
Related
Hey,
I have extremely annoying issue on my Desire. Everytime I am opening an app there is a delay between tapping the icon and displaying app (full loaded screen of the app). Sometimes it takes 3-5 seconds. You can imagine how bothering it is. I found out that when I do full wipe it is great again but it takes less then two three days and lags are back. The biggest dealy has Handcent, Gallery, etc. Sometimes opening settings is laggy too.
Any idea how to get rid of this lags? I think it started some time after rooting my phone. Could be the problem the number of apps installed on a2sd storage? I have currently 106 apps.
I am really desperate! I love Android but this is not the user experinece I would expect from such a system and such a smartphone!!
I use GingerVillain 2.7 based on CM7. I used CM7 before and it was the same.
Do you use software like setcpu to control the cpu frequency or using scripts/software to control the voltage?
MatDrOiD said:
Do you use software like setcpu to control the cpu frequency or using scripts/software to control the voltage?
Click to expand...
Click to collapse
I used JuiceDefender but I had this problem before I use it. There is also some performance settings in CM7-settings. Do you think the problem is somewhere in CPU settings?
I don't think so. Given the fact that after a wipe it works fine, I'd put my money on your davlik cache. As it grows bigger in size, combined with probably low class sd card, it gets slower. You have some tips&tricks how to move davlik to /data in the development section. Or simply buy a faster sd card.
erklat said:
I don't think so. Given the fact that after a wipe it works fine, I'd put my money on your davlik cache. As it grows bigger in size, combined with probably low class sd card, it gets slower. You have some tips&tricks how to move davlik to /data in the development section. Or simply buy a faster sd card.
Click to expand...
Click to collapse
I have Kingston 16GB class4. I know that class4 is not the biggest number but I read that Kingston is as fast as some other cards class6 and that in fact it is not necessary to have so speed card This is a new want I don't really want to pay for another one...
Move dalvik to /data? Do you think this helps? And a2sd storage will work the same way?
devcager said:
I have Kingston 16GB class4. I know that class4 is not the biggest number but I read that Kingston is as fast as some other cards class6 and that in fact it is not necessary to have so speed card This is a new want I don't really want to pay for another one...
Move dalvik to /data? Do you think this helps? And a2sd storage will work the same way?
Click to expand...
Click to collapse
Moving dalvik cache to internal /data partition often solves perfomance problems. That's why some developers do not move it to sd.
It won't disturb the working of a2sd, because has two different versions:
A2SD: All apps you install will be automatically moved to sd-ext
A2SD+: All apps you install plus dalvik cache will be automatically moved to sd-ext.
So when you move dalvik cache to /data, you are using "only" a2sd, but it's still working the same way.
But before this I would try wether wiping dalvik cache in recovery solves your problem.
MatDrOiD said:
Moving dalvik cache to internal /data partition often solves perfomance problems. That's why some developers do not move it to sd.
It won't disturb the working of a2sd, because has two different versions:
A2SD: All apps you install will be automatically moved to sd-ext
A2SD+: All apps you install plus dalvik cache will be automatically moved to sd-ext.
So when you move dalvik cache to /data, you are using "only" a2sd, but it's still working the same way.
But before this I would try wether wiping dalvik cache in recovery solves your problem.
Click to expand...
Click to collapse
Oh. Thanks! I will try! But I am afraid that I tried an app moving dalvik in the past and my phone got extremely laggy and buggy. Maybe it was not compatible app with my ROM
As I said when I do full wipe (so wiping dalvik as well) it is quick several days but then it gets back to laggy phone.
GV 2.7 - I have dalvik cache on Internal memory with Cm7r2 Hboot - no delays like you have, instead instant opening.
You can move it easily by using any terminal (I have better Terminal Emulator Pro).
Commands:
a2sd cachesd - moves Dalvik to SD
a2sd cachesdreset - moves Dalvik to SD, but firstly it wipes it.
a2sd nocache - moves Dalvik to Internal NAND.
a2sd nocachereset - moves Dalvik to Internal, but firstly it wipes it.
Personally, I prefer the "reset" commands.
davebugyi said:
GV 2.7 - I have dalvik cache on Internal memory with Cm7r2 Hboot - no delays like you have, instead instant opening.
You can move it easily by using any terminal (I have better Terminal Emulator Pro).
Commands:
a2sd cachesd - moves Dalvik to SD
a2sd cachesdreset - moves Dalvik to SD, but firstly it wipes it.
a2sd nocache - moves Dalvik to Internal NAND.
a2sd nocachereset - moves Dalvik to Internal, but firstly it wipes it.
Personally, I prefer the "reset" commands.
Click to expand...
Click to collapse
And when it is not enough space on internal??
devcager said:
And when it is not enough space on internal??
Click to expand...
Click to collapse
Change your partition table. With aosp rom you waste almost 150mb on /system. That is one hefty davlik with 110 apps approximately.
Hey
when i download any app from market more than 5 MB i got this message
There is isufficient space on the device
Click to expand...
Click to collapse
i have 1GB ex3 and i wiped and formated it
and wipe cashe and dvlik cashe
my rom is miui ap2sd version
Flash this market cache fix: http://www.mediafire.com/?o9n4o0jrci74yg0
i had same issue i use link2sd and app2sd i set link 2 sd to automatic as soon as i dload any apps they go str8 to sd card and keeps enough free space on my desire if it gets low goto setting and relink that usually fixes it for me that is...hope ya get it figured
I've had this too. My problem was a wrong hboot
Just flash hboot with 40mb cache partition, eg 180 system, 40 cache, 217 data. with a2sd it wil be enough.
With me the same problem on newest bilds of miui bilds,and cant stream radio and tv without disconections,can someone help?
Sent from my HTC Desire using xda premium
See the posts above you.
Hi,
I run Leedroid HD V3.3.3. (Android 2.3.3), with Data++ so I am S-off have reformatted my NAND memory (CM7 Hboot I think) and 1GB EXT partition on my SD card.
So the point is, I should have more then enough space for apps and stuff. But I keep getting the message "phone is getting low on storage". When I go to "settings ->manage application". I see 267MB used, only 20MB free.
But when I add the apps I have installed, there is no way I have 267MB worth of apps installed...
I already tried clearing cache partition in recovery mode. And also tried to clear browser cache and history.
I searched google and found a lot of people with similar problems, but no real fix anywhere...
Can someone help please?
Grtz
Download diskusage app and check. Your app data is on /data so it is not that hard to fill /data partition on CM7R2. I have roughly 50mb free.
So how can I fix this then?
You can also check via Titanium Backup menu (app usage or sth like this), the best method is changing version of hboot (if Your ROM support other hboot!) or delete items which You don't use, move some apps to SD (if You use ROM in which we can move apps) with APP2SD app
swimon said:
Hi,
I run Leedroid HD V3.3.3. (Android 2.3.3), with Data++ so I am S-off have reformatted my NAND memory (CM7 Hboot I think) and 1GB EXT partition on my SD card.
So the point is, I should have more then enough space for apps and stuff. But I keep getting the message "phone is getting low on storage". When I go to "settings ->manage application". I see 267MB used, only 20MB free.
But when I add the apps I have installed, there is no way I have 267MB worth of apps installed...
I already tried clearing cache partition in recovery mode. And also tried to clear browser cache and history.
I searched google and found a lot of people with similar problems, but no real fix anywhere...
Can someone help please?
Grtz
Click to expand...
Click to collapse
have you read through all of the FAQ for that rom, i found it very useful
it's likely you're running low because of dalvik cache on nand by default, you can move it to sd via a zip from that post. I used to run that rom, had plenty of space with cm7 hboot and dalvik on sd.
g1b50n said:
You can also check via Titanium Backup menu (app usage or sth like this), the best method is changing version of hboot (if Your ROM support other hboot!) or delete items which You don't use, move some apps to SD (if You use ROM in which we can move apps) with APP2SD app
Click to expand...
Click to collapse
i agree, deleting unused apps is often the easiest way!
but no, no need to manually 'move to SD' with this rom, keep everything on 'internal', then apps will be moved to the partition by default.
(you can move to sd, but then you're using the FAT32 partition of the card, hence wasting the partition)
Check if you have correctly installed D2SD script.
Probably you have to move dalvik cache to your SD. I have a different Rom but had the same problem, moving dalvik cahce fixed it for me.
thanks for all the replies,
sorry I kinda lost eye of this thread (because it's my brothers phone)
but I will definately try to move the Dalvik to SD, hope that works.
Greetings
try a rom with amarullz's AD2SDX, like Runnymede AIO - by sebastiaan15
before i only had 15 MB free (had to deleting randomly some apps), now 340MB free (same apps installed).
must by s-off and an CM7r2 HBOOT
Moving Dalvik to Cache with the script from Leedroid's topic worked like a charm,
thanks everyone.
Grtz!
Hey,
I have cm7. 2 and use link2sd.
I have moved anything to sd (apk, lib, dalvik) and now i have 80mb free.
Which of them should be on internal to make the apps starting fastest? Libs, apk or dalvik?
Metin
It would be dalvik cache and libs i believe.
And which is better??
s2e script/app work very well with CM rom, why are youn using link2sd? I think it's better to move to s2e, and in app menu choose not to move /data/data. Everything else is ok. If your phone doesn't work smooth enough move back on internal memory dalvik-cache.
On cm7. 2 it doesnt worked, ok i move dalvik back
Qizami said:
s2e script/app work very well with CM rom, why are youn using link2sd? I think it's better to move to s2e, and in app menu choose not to move /data/data. Everything else is ok. If your phone doesn't work smooth enough move back on internal memory dalvik-cache.
Click to expand...
Click to collapse
I've used s2e and now I'm using Link2SD so I can have more control of what goes to the EXT partition. Unlike S2E which moves ALL apps to the ext partition by default, with link2sd I can choose what apps I wanted to reside on the internal that means I can have my frequently used app's dalvik files on the internal while having my other apps dalvik on the ext. You can't do that with s2e. It's basically all or nothing.
If you would want something that you have to set up once and forget, s2e would be the best choice.
looking to install over 150 apps, any ROM recommendations?
Sent from my HTC Desire using Tapatalk 2
You can do it with pretty much every ROM which supports cm7r2 hboot + a2sd solution. (apps + dalvik on SD)
Or basically any ROM with int2ext+ though it has some impact on performance.
k3lcior said:
You can do it with pretty much every ROM which supports cm7r2 hboot + a2sd solution. (apps + dalvik on SD)
Or basically any ROM with int2ext+ though it has some impact on performance.
Click to expand...
Click to collapse
@k3lcior: I do not understand the difference between a2sd (apps + dalvik) and int2ext+. They both would free up the same amount of space I guess. Is the diff in internal implementation? Is there a diff in performance?
A2sd + dalvik2sd only moves apps and dalvik cache to sd-ext, leaving data on internal, therefore being faster.
Int2sd+ mounts sd-ext as /data, and moves all data to sd, being slower, depending on your sd-card. Usually class 4 or above cards recommended here.
abaaaabbbb63 said:
A2sd + dalvik2sd only moves apps and dalvik cache to sd-ext, leaving data on internal, therefore being faster.
Click to expand...
Click to collapse
It is dalvik cache that impacts performance. Whether you leave app-data on internal or no matters not.
Sent from my HTC Desire using Tapatalk 2
Yea...but still, int2sd+ is slower.
Almost every rom can do that. Latest rom based on oxygen like Nikez have all on ext except data, so you have 2 GB internal memory if proper pre-configured, no need to move anything to SD just install them and don`t touch. how to do that:
To enable Apps2Sdext and/or Data2SdExt visit Settings|Applications|Development. ((((My suggestion is don`t enable Data2SdExt! that can be slow)))
To set the default installation partition go to Settings|Applications. (set SD-EXT) If you already installed some soft just wait on next boot until phone move them to ext...
To move applications from sd-ext|sdcard|internal Settings|Applications|Manage Applications.
There is no Dalvik2SdExt because .dex will follow the location of the apk, so if you install an application on sd-ext the dex will be on sd-ext, the same applys for internal or sdcard.
Do not use A2sd scripts.
and yes widgets, launchers and all can be installed to SDEXT....
Than use some app to disable programs you don`t want to start on boot or you memory will be low after you install 100+ apps..
When you do all that you can have easy 250+ apps with no memory lag in your phone. Just don`t install too many resident background programs like FB, Whatsup Viber etc, than your battery will be drained in ~24 hours... Install just what you need, but games you can install like unlimited
robertsu said:
Latest rom based on oxygen like Nikez
Click to expand...
Click to collapse
Nikez's JB rom is not based on Oxygen. The only thing Oxygen and that rom have in common is that they are both made on a computer.
ok. got it.. What is int2ext+ then? I did get a class 10 card to try these things out, but various threads give differing opinions about what is best.
Is there a consensus?
abaaaabbbb63 said:
A2sd + dalvik2sd only moves apps and dalvik cache to sd-ext, leaving data on internal, therefore being faster.
Int2sd+ mounts sd-ext as /data, and moves all data to sd, being slower, depending on your sd-card. Usually class 4 or above cards recommended here.
Click to expand...
Click to collapse
Class 2-2mb/s *<Sequential>* write speed
Class 4-4mb/s
And soo on
Class 10-10mb/s
abaaaabbbb63 said:
write speed
Click to expand...
Click to collapse
Sequential write speed.
Sent from my HTC Desire using Tapatalk 2
What I meant is.. is there consensus on whether to use a2sd, int2sd+, int2ext+, etc... There seem to be so many ways to save space.
Every script does a different thing. It depends on how much space you need.
Roms from Droidzone have many internal memory!