Hi Friends,
I am having the problem with the Samsung Galaxy Y Pro Duos, The phone auto restarts whenever its in standby position.
Android verion : 2.3.6
Baseband version : B5512XXLD3
Kernel version : 2.6.35.7 - [email protected]#1
Please Help me.
I have the same problem with my Duos pro. Have you been able to fix it?
Please make wipe data reset....... Then check what hpn ......... I hope ur.problem solve after wipe data reset...........
Sent from my GT-S6102 using Tapatalk 2
GT-B5512 my experience
I also had endless problems with this (otherwise good when it works) phone. I strongly think its a problem with the stock firmware and at the moment I've installed the custom kernel (v1.2.2) as developed by user nitubhaskar in the following post, which seems to make the phone very stable and fast, with increased battery life.
http://forum.xda-developers.com/showthread.php?t=1913349
mobilebaz said:
Hi Friends,
I am having the problem with the Samsung Galaxy Y Pro Duos, The phone auto restarts whenever its in standby position.
Android verion : 2.3.6
Baseband version : B5512XXLD3
Kernel version : 2.6.35.7 - [email protected]#1
Please Help me.
Click to expand...
Click to collapse
i was having the same problam.. but now i have fixed it by upgrading the custom rom
mobilebaz said:
Hi Friends,
I am having the problem with the Samsung Galaxy Y Pro Duos, The phone auto restarts whenever its in standby position.
Android verion : 2.3.6
Baseband version : B5512XXLD3
Kernel version : 2.6.35.7 - [email protected]#1
Please Help me.
Click to expand...
Click to collapse
Related
hi
how r u ?
i have problem with installing kernel siyah on galaxy s2
my phone information
Android ver
2.3.5
Baseband ver
I9100xxki4
Kernel Ver
2.6.35.7-i9100jpkj2 - CL655700
[email protected]#2
build number
gingerbread.jpkj2
when i install the kernel it doesn't change !!
i'm installing siyah kernel 2.2 with odin.exe
so what i have to do ?
and do you have suitable kernel for my phone ?
thank you ..
Regards
So guys ?
is there any answer ?
thx
Hi Friends. Need Help
I had rooted my Note 2 . some months back,some days before My Bluetooth stoped functioning.. I updated it... My BT is still the same, but my phone is now back to the Unroot..
I need to Root it. .HELP ME OUT ...
HOW TO ROOT SAMSUNG NOTE II
Model : Note 2 …GT7100
Android Version : 4.102….
Baseband Version N7100XXDLK77
Kernel Version : 3.0.31-1174148
Build Number : JZO54K.N7100 ZSDME1
Thanks
regards
Sunny
Hi,
I am not a techie but I had upgrade my galaxy note 2 with unofficial rom of 4.3 , I am facing following issues so want to downgrade it to official version, please give me the procedure.
CURRENT DETAILS:
ANDROID: 4.3
ROOTED: YES
MODEL: GT-N7100
BASEBAND: N7100XXEM16
BUILD NUMBER: JSS15JN7100XXUEM16
ISSUES:- 1)Battery drain
2) After call gets connected, am not able to see the screen until call is hanged up.
3) other small issues.
Hy all,
I just bought my Samsung Galaxy 10.1 (edition 2014)
Phone Model: SM-P600
Device type: lt03wifi
PDA Version: XXUBMJ6
Android version: 4.3
CSC: XEF
Root : OK (CF Auto Root)
Recovery : Ok (Philz Touch 6.41.6)
Knox : deleted
Backup : done
I would like to flash a Kitkat 4.4.2 custom rom, but first let me know if I can flash directly (after nandroid banckup) or if it is better to install a stock KitKat rom at first (via Odin) and then after flashing a custom.
With my Galaxy Note 2 I know that I had to change the bootloader before flashing Kitkat but here I do not know.
Thank you for your information and advice
NB : excuse my signature always under SGNII
claude974 said:
Hy all,
I just bought my Samsung Galaxy 10.1 (edition 2014)
Phone Model: SM-P600
Device type: lt03wifi
PDA Version: XXUBMJ6
Android version: 4.3
CSC: XEF
Root : OK (CF Auto Root)
Recovery : Ok (Philz Touch 6.41.6)
Knox : deleted
Backup : done
I would like to flash a Kitkat 4.4.2 custom rom, but first let me know if I can flash directly (after nandroid banckup) or if it is better to install a stock KitKat rom at first (via Odin) and then after flashing a custom.
With my Galaxy Note 2 I know that I had to change the bootloader before flashing Kitkat but here I do not know.
Thank you for your information and advice
NB : excuse my signature always under SGNII
Click to expand...
Click to collapse
It is important to Flash stock 4.4.2 before flashing any custom kitkat Rom . And it becomes very must if you are flashing a CM based rom. Flashing Stock Kitkat changes the old bootloader to the kitkat bootloader which is essential for Flashing CM based ROMs .
Hope this helps you !!!
Don't forget to press the thanks button !!!
Sent from my GT-I9082 using XDA Premium 4 mobile app
Hey Guys ! Im Newbie Here.... Can Anyone Help me here ?
I am Using (Samsung Galaxy Gio)
Android Version (Jellybean 4.2.1)
Baseband Version (S5660DXKT8) But Its Korean version - when i see my back of my galaxy gio i see like a firmware version but i dont understand co`z its korean language and this is shw-m290s but when i search in google ..no firmware like that..only result was shw-m290k
for now thats why i use that basband version
Now The problem is..
My Bluetooth And Wifi.. How to fix this ?
When I flash shw-m290k firmware its stock on samsung logo...
Then when i flash asian version its work but bluetooth and wifi not working..sometimes wifi is working
Anyone Can help me for this ? Please ?